1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 #ifndef _ASM_POWERPC_IO_H
3 #define _ASM_POWERPC_IO_H
4 #ifdef __KERNEL__
5 
6 /*
7  */
8 
9 /* Check of existence of legacy devices */
10 extern int check_legacy_ioport(unsigned long base_port);
11 #define I8042_DATA_REG	0x60
12 #define FDC_BASE	0x3f0
13 
14 #if defined(CONFIG_PPC64) && defined(CONFIG_PCI)
15 extern struct pci_dev *isa_bridge_pcidev;
16 /*
17  * has legacy ISA devices ?
18  */
19 #define arch_has_dev_port()	(isa_bridge_pcidev != NULL || isa_io_special)
20 #endif
21 
22 #include <linux/device.h>
23 #include <linux/compiler.h>
24 #include <linux/mm.h>
25 #include <asm/page.h>
26 #include <asm/byteorder.h>
27 #include <asm/synch.h>
28 #include <asm/delay.h>
29 #include <asm/mmiowb.h>
30 #include <asm/mmu.h>
31 
32 #define SIO_CONFIG_RA	0x398
33 #define SIO_CONFIG_RD	0x399
34 
35 /* 32 bits uses slightly different variables for the various IO
36  * bases. Most of this file only uses _IO_BASE though which we
37  * define properly based on the platform
38  */
39 #ifndef CONFIG_PCI
40 #define _IO_BASE	0
41 #define _ISA_MEM_BASE	0
42 #define PCI_DRAM_OFFSET 0
43 #elif defined(CONFIG_PPC32)
44 #define _IO_BASE	isa_io_base
45 #define _ISA_MEM_BASE	isa_mem_base
46 #define PCI_DRAM_OFFSET	pci_dram_offset
47 #else
48 #define _IO_BASE	pci_io_base
49 #define _ISA_MEM_BASE	isa_mem_base
50 #define PCI_DRAM_OFFSET	0
51 #endif
52 
53 extern unsigned long isa_io_base;
54 extern unsigned long pci_io_base;
55 extern unsigned long pci_dram_offset;
56 
57 extern resource_size_t isa_mem_base;
58 
59 /* Boolean set by platform if PIO accesses are suppored while _IO_BASE
60  * is not set or addresses cannot be translated to MMIO. This is typically
61  * set when the platform supports "special" PIO accesses via a non memory
62  * mapped mechanism, and allows things like the early udbg UART code to
63  * function.
64  */
65 extern bool isa_io_special;
66 
67 #ifdef CONFIG_PPC32
68 #if defined(CONFIG_PPC_INDIRECT_PIO) || defined(CONFIG_PPC_INDIRECT_MMIO)
69 #error CONFIG_PPC_INDIRECT_{PIO,MMIO} are not yet supported on 32 bits
70 #endif
71 #endif
72 
73 /*
74  *
75  * Low level MMIO accessors
76  *
77  * This provides the non-bus specific accessors to MMIO. Those are PowerPC
78  * specific and thus shouldn't be used in generic code. The accessors
79  * provided here are:
80  *
81  *	in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64
82  *	out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64
83  *	_insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns
84  *
85  * Those operate directly on a kernel virtual address. Note that the prototype
86  * for the out_* accessors has the arguments in opposite order from the usual
87  * linux PCI accessors. Unlike those, they take the address first and the value
88  * next.
89  *
90  * Note: I might drop the _ns suffix on the stream operations soon as it is
91  * simply normal for stream operations to not swap in the first place.
92  *
93  */
94 
95 /* -mprefixed can generate offsets beyond range, fall back hack */
96 #ifdef CONFIG_PPC_KERNEL_PREFIXED
97 #define DEF_MMIO_IN_X(name, size, insn)				\
98 static inline u##size name(const volatile u##size __iomem *addr)	\
99 {									\
100 	u##size ret;							\
101 	__asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync"	\
102 		: "=r" (ret) : "r" (addr) : "memory");			\
103 	return ret;							\
104 }
105 
106 #define DEF_MMIO_OUT_X(name, size, insn)				\
107 static inline void name(volatile u##size __iomem *addr, u##size val)	\
108 {									\
109 	__asm__ __volatile__("sync;"#insn" %1,0,%0"			\
110 		: : "r" (addr), "r" (val) : "memory");			\
111 	mmiowb_set_pending();						\
112 }
113 
114 #define DEF_MMIO_IN_D(name, size, insn)				\
115 static inline u##size name(const volatile u##size __iomem *addr)	\
116 {									\
117 	u##size ret;							\
118 	__asm__ __volatile__("sync;"#insn" %0,0(%1);twi 0,%0,0;isync"\
119 		: "=r" (ret) : "b" (addr) : "memory");	\
120 	return ret;							\
121 }
122 
123 #define DEF_MMIO_OUT_D(name, size, insn)				\
124 static inline void name(volatile u##size __iomem *addr, u##size val)	\
125 {									\
126 	__asm__ __volatile__("sync;"#insn" %1,0(%0)"			\
127 		: : "b" (addr), "r" (val) : "memory");	\
128 	mmiowb_set_pending();						\
129 }
130 #else
131 #define DEF_MMIO_IN_X(name, size, insn)				\
132 static inline u##size name(const volatile u##size __iomem *addr)	\
133 {									\
134 	u##size ret;							\
135 	__asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync"	\
136 		: "=r" (ret) : "Z" (*addr) : "memory");			\
137 	return ret;							\
138 }
139 
140 #define DEF_MMIO_OUT_X(name, size, insn)				\
141 static inline void name(volatile u##size __iomem *addr, u##size val)	\
142 {									\
143 	__asm__ __volatile__("sync;"#insn" %1,%y0"			\
144 		: "=Z" (*addr) : "r" (val) : "memory");			\
145 	mmiowb_set_pending();						\
146 }
147 
148 #define DEF_MMIO_IN_D(name, size, insn)				\
149 static inline u##size name(const volatile u##size __iomem *addr)	\
150 {									\
151 	u##size ret;							\
152 	__asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\
153 		: "=r" (ret) : "m<>" (*addr) : "memory");	\
154 	return ret;							\
155 }
156 
157 #define DEF_MMIO_OUT_D(name, size, insn)				\
158 static inline void name(volatile u##size __iomem *addr, u##size val)	\
159 {									\
160 	__asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0"			\
161 		: "=m<>" (*addr) : "r" (val) : "memory");	\
162 	mmiowb_set_pending();						\
163 }
164 #endif
165 
166 DEF_MMIO_IN_D(in_8,     8, lbz);
167 DEF_MMIO_OUT_D(out_8,   8, stb);
168 
169 #ifdef __BIG_ENDIAN__
170 DEF_MMIO_IN_D(in_be16, 16, lhz);
171 DEF_MMIO_IN_D(in_be32, 32, lwz);
172 DEF_MMIO_IN_X(in_le16, 16, lhbrx);
173 DEF_MMIO_IN_X(in_le32, 32, lwbrx);
174 
175 DEF_MMIO_OUT_D(out_be16, 16, sth);
176 DEF_MMIO_OUT_D(out_be32, 32, stw);
177 DEF_MMIO_OUT_X(out_le16, 16, sthbrx);
178 DEF_MMIO_OUT_X(out_le32, 32, stwbrx);
179 #else
180 DEF_MMIO_IN_X(in_be16, 16, lhbrx);
181 DEF_MMIO_IN_X(in_be32, 32, lwbrx);
182 DEF_MMIO_IN_D(in_le16, 16, lhz);
183 DEF_MMIO_IN_D(in_le32, 32, lwz);
184 
185 DEF_MMIO_OUT_X(out_be16, 16, sthbrx);
186 DEF_MMIO_OUT_X(out_be32, 32, stwbrx);
187 DEF_MMIO_OUT_D(out_le16, 16, sth);
188 DEF_MMIO_OUT_D(out_le32, 32, stw);
189 
190 #endif /* __BIG_ENDIAN */
191 
192 #ifdef __powerpc64__
193 
194 #ifdef __BIG_ENDIAN__
195 DEF_MMIO_OUT_D(out_be64, 64, std);
196 DEF_MMIO_IN_D(in_be64, 64, ld);
197 
198 /* There is no asm instructions for 64 bits reverse loads and stores */
in_le64(const volatile u64 __iomem * addr)199 static inline u64 in_le64(const volatile u64 __iomem *addr)
200 {
201 	return swab64(in_be64(addr));
202 }
203 
out_le64(volatile u64 __iomem * addr,u64 val)204 static inline void out_le64(volatile u64 __iomem *addr, u64 val)
205 {
206 	out_be64(addr, swab64(val));
207 }
208 #else
209 DEF_MMIO_OUT_D(out_le64, 64, std);
210 DEF_MMIO_IN_D(in_le64, 64, ld);
211 
212 /* There is no asm instructions for 64 bits reverse loads and stores */
in_be64(const volatile u64 __iomem * addr)213 static inline u64 in_be64(const volatile u64 __iomem *addr)
214 {
215 	return swab64(in_le64(addr));
216 }
217 
out_be64(volatile u64 __iomem * addr,u64 val)218 static inline void out_be64(volatile u64 __iomem *addr, u64 val)
219 {
220 	out_le64(addr, swab64(val));
221 }
222 
223 #endif
224 #endif /* __powerpc64__ */
225 
226 /*
227  * Low level IO stream instructions are defined out of line for now
228  */
229 extern void _insb(const volatile u8 __iomem *addr, void *buf, long count);
230 extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count);
231 extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count);
232 extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count);
233 extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count);
234 extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count);
235 
236 /* The _ns naming is historical and will be removed. For now, just #define
237  * the non _ns equivalent names
238  */
239 #define _insw	_insw_ns
240 #define _insl	_insl_ns
241 #define _outsw	_outsw_ns
242 #define _outsl	_outsl_ns
243 
244 
245 /*
246  * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line
247  */
248 
249 extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n);
250 extern void _memcpy_fromio(void *dest, const volatile void __iomem *src,
251 			   unsigned long n);
252 extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
253 			 unsigned long n);
254 
255 /*
256  *
257  * PCI and standard ISA accessors
258  *
259  * Those are globally defined linux accessors for devices on PCI or ISA
260  * busses. They follow the Linux defined semantics. The current implementation
261  * for PowerPC is as close as possible to the x86 version of these, and thus
262  * provides fairly heavy weight barriers for the non-raw versions
263  *
264  * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_MMIO
265  * or CONFIG_PPC_INDIRECT_PIO are set allowing the platform to provide its
266  * own implementation of some or all of the accessors.
267  */
268 
269 /*
270  * Include the EEH definitions when EEH is enabled only so they don't get
271  * in the way when building for 32 bits
272  */
273 #ifdef CONFIG_EEH
274 #include <asm/eeh.h>
275 #endif
276 
277 /* Shortcut to the MMIO argument pointer */
278 #define PCI_IO_ADDR	volatile void __iomem *
279 
280 /* Indirect IO address tokens:
281  *
282  * When CONFIG_PPC_INDIRECT_MMIO is set, the platform can provide hooks
283  * on all MMIOs. (Note that this is all 64 bits only for now)
284  *
285  * To help platforms who may need to differentiate MMIO addresses in
286  * their hooks, a bitfield is reserved for use by the platform near the
287  * top of MMIO addresses (not PIO, those have to cope the hard way).
288  *
289  * The highest address in the kernel virtual space are:
290  *
291  *  d0003fffffffffff	# with Hash MMU
292  *  c00fffffffffffff	# with Radix MMU
293  *
294  * The top 4 bits are reserved as the region ID on hash, leaving us 8 bits
295  * that can be used for the field.
296  *
297  * The direct IO mapping operations will then mask off those bits
298  * before doing the actual access, though that only happen when
299  * CONFIG_PPC_INDIRECT_MMIO is set, thus be careful when you use that
300  * mechanism
301  *
302  * For PIO, there is a separate CONFIG_PPC_INDIRECT_PIO which makes
303  * all PIO functions call through a hook.
304  */
305 
306 #ifdef CONFIG_PPC_INDIRECT_MMIO
307 #define PCI_IO_IND_TOKEN_SHIFT	52
308 #define PCI_IO_IND_TOKEN_MASK	(0xfful << PCI_IO_IND_TOKEN_SHIFT)
309 #define PCI_FIX_ADDR(addr)						\
310 	((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK))
311 #define PCI_GET_ADDR_TOKEN(addr)					\
312 	(((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> 		\
313 		PCI_IO_IND_TOKEN_SHIFT)
314 #define PCI_SET_ADDR_TOKEN(addr, token) 				\
315 do {									\
316 	unsigned long __a = (unsigned long)(addr);			\
317 	__a &= ~PCI_IO_IND_TOKEN_MASK;					\
318 	__a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT;	\
319 	(addr) = (void __iomem *)__a;					\
320 } while(0)
321 #else
322 #define PCI_FIX_ADDR(addr) (addr)
323 #endif
324 
325 
326 /*
327  * Non ordered and non-swapping "raw" accessors
328  */
329 
__raw_readb(const volatile void __iomem * addr)330 static inline unsigned char __raw_readb(const volatile void __iomem *addr)
331 {
332 	return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr);
333 }
334 #define __raw_readb __raw_readb
335 
__raw_readw(const volatile void __iomem * addr)336 static inline unsigned short __raw_readw(const volatile void __iomem *addr)
337 {
338 	return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr);
339 }
340 #define __raw_readw __raw_readw
341 
__raw_readl(const volatile void __iomem * addr)342 static inline unsigned int __raw_readl(const volatile void __iomem *addr)
343 {
344 	return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr);
345 }
346 #define __raw_readl __raw_readl
347 
__raw_writeb(unsigned char v,volatile void __iomem * addr)348 static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
349 {
350 	*(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v;
351 }
352 #define __raw_writeb __raw_writeb
353 
__raw_writew(unsigned short v,volatile void __iomem * addr)354 static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
355 {
356 	*(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v;
357 }
358 #define __raw_writew __raw_writew
359 
__raw_writel(unsigned int v,volatile void __iomem * addr)360 static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
361 {
362 	*(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v;
363 }
364 #define __raw_writel __raw_writel
365 
366 #ifdef __powerpc64__
__raw_readq(const volatile void __iomem * addr)367 static inline unsigned long __raw_readq(const volatile void __iomem *addr)
368 {
369 	return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr);
370 }
371 #define __raw_readq __raw_readq
372 
__raw_writeq(unsigned long v,volatile void __iomem * addr)373 static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
374 {
375 	*(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v;
376 }
377 #define __raw_writeq __raw_writeq
378 
__raw_writeq_be(unsigned long v,volatile void __iomem * addr)379 static inline void __raw_writeq_be(unsigned long v, volatile void __iomem *addr)
380 {
381 	__raw_writeq((__force unsigned long)cpu_to_be64(v), addr);
382 }
383 #define __raw_writeq_be __raw_writeq_be
384 
385 /*
386  * Real mode versions of the above. Those instructions are only supposed
387  * to be used in hypervisor real mode as per the architecture spec.
388  */
__raw_rm_writeb(u8 val,volatile void __iomem * paddr)389 static inline void __raw_rm_writeb(u8 val, volatile void __iomem *paddr)
390 {
391 	__asm__ __volatile__(".machine push;   \
392 			      .machine power6; \
393 			      stbcix %0,0,%1;  \
394 			      .machine pop;"
395 		: : "r" (val), "r" (paddr) : "memory");
396 }
397 
__raw_rm_writew(u16 val,volatile void __iomem * paddr)398 static inline void __raw_rm_writew(u16 val, volatile void __iomem *paddr)
399 {
400 	__asm__ __volatile__(".machine push;   \
401 			      .machine power6; \
402 			      sthcix %0,0,%1;  \
403 			      .machine pop;"
404 		: : "r" (val), "r" (paddr) : "memory");
405 }
406 
__raw_rm_writel(u32 val,volatile void __iomem * paddr)407 static inline void __raw_rm_writel(u32 val, volatile void __iomem *paddr)
408 {
409 	__asm__ __volatile__(".machine push;   \
410 			      .machine power6; \
411 			      stwcix %0,0,%1;  \
412 			      .machine pop;"
413 		: : "r" (val), "r" (paddr) : "memory");
414 }
415 
__raw_rm_writeq(u64 val,volatile void __iomem * paddr)416 static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr)
417 {
418 	__asm__ __volatile__(".machine push;   \
419 			      .machine power6; \
420 			      stdcix %0,0,%1;  \
421 			      .machine pop;"
422 		: : "r" (val), "r" (paddr) : "memory");
423 }
424 
__raw_rm_writeq_be(u64 val,volatile void __iomem * paddr)425 static inline void __raw_rm_writeq_be(u64 val, volatile void __iomem *paddr)
426 {
427 	__raw_rm_writeq((__force u64)cpu_to_be64(val), paddr);
428 }
429 
__raw_rm_readb(volatile void __iomem * paddr)430 static inline u8 __raw_rm_readb(volatile void __iomem *paddr)
431 {
432 	u8 ret;
433 	__asm__ __volatile__(".machine push;   \
434 			      .machine power6; \
435 			      lbzcix %0,0, %1; \
436 			      .machine pop;"
437 			     : "=r" (ret) : "r" (paddr) : "memory");
438 	return ret;
439 }
440 
__raw_rm_readw(volatile void __iomem * paddr)441 static inline u16 __raw_rm_readw(volatile void __iomem *paddr)
442 {
443 	u16 ret;
444 	__asm__ __volatile__(".machine push;   \
445 			      .machine power6; \
446 			      lhzcix %0,0, %1; \
447 			      .machine pop;"
448 			     : "=r" (ret) : "r" (paddr) : "memory");
449 	return ret;
450 }
451 
__raw_rm_readl(volatile void __iomem * paddr)452 static inline u32 __raw_rm_readl(volatile void __iomem *paddr)
453 {
454 	u32 ret;
455 	__asm__ __volatile__(".machine push;   \
456 			      .machine power6; \
457 			      lwzcix %0,0, %1; \
458 			      .machine pop;"
459 			     : "=r" (ret) : "r" (paddr) : "memory");
460 	return ret;
461 }
462 
__raw_rm_readq(volatile void __iomem * paddr)463 static inline u64 __raw_rm_readq(volatile void __iomem *paddr)
464 {
465 	u64 ret;
466 	__asm__ __volatile__(".machine push;   \
467 			      .machine power6; \
468 			      ldcix %0,0, %1;  \
469 			      .machine pop;"
470 			     : "=r" (ret) : "r" (paddr) : "memory");
471 	return ret;
472 }
473 #endif /* __powerpc64__ */
474 
475 /*
476  *
477  * PCI PIO and MMIO accessors.
478  *
479  *
480  * On 32 bits, PIO operations have a recovery mechanism in case they trigger
481  * machine checks (which they occasionally do when probing non existing
482  * IO ports on some platforms, like PowerMac and 8xx).
483  * I always found it to be of dubious reliability and I am tempted to get
484  * rid of it one of these days. So if you think it's important to keep it,
485  * please voice up asap. We never had it for 64 bits and I do not intend
486  * to port it over
487  */
488 
489 #ifdef CONFIG_PPC32
490 
491 #define __do_in_asm(name, op)				\
492 static inline unsigned int name(unsigned int port)	\
493 {							\
494 	unsigned int x;					\
495 	__asm__ __volatile__(				\
496 		"sync\n"				\
497 		"0:"	op "	%0,0,%1\n"		\
498 		"1:	twi	0,%0,0\n"		\
499 		"2:	isync\n"			\
500 		"3:	nop\n"				\
501 		"4:\n"					\
502 		".section .fixup,\"ax\"\n"		\
503 		"5:	li	%0,-1\n"		\
504 		"	b	4b\n"			\
505 		".previous\n"				\
506 		EX_TABLE(0b, 5b)			\
507 		EX_TABLE(1b, 5b)			\
508 		EX_TABLE(2b, 5b)			\
509 		EX_TABLE(3b, 5b)			\
510 		: "=&r" (x)				\
511 		: "r" (port + _IO_BASE)			\
512 		: "memory");  				\
513 	return x;					\
514 }
515 
516 #define __do_out_asm(name, op)				\
517 static inline void name(unsigned int val, unsigned int port) \
518 {							\
519 	__asm__ __volatile__(				\
520 		"sync\n"				\
521 		"0:" op " %0,0,%1\n"			\
522 		"1:	sync\n"				\
523 		"2:\n"					\
524 		EX_TABLE(0b, 2b)			\
525 		EX_TABLE(1b, 2b)			\
526 		: : "r" (val), "r" (port + _IO_BASE)	\
527 		: "memory");   	   	   		\
528 }
529 
530 __do_in_asm(_rec_inb, "lbzx")
531 __do_in_asm(_rec_inw, "lhbrx")
532 __do_in_asm(_rec_inl, "lwbrx")
533 __do_out_asm(_rec_outb, "stbx")
534 __do_out_asm(_rec_outw, "sthbrx")
535 __do_out_asm(_rec_outl, "stwbrx")
536 
537 #endif /* CONFIG_PPC32 */
538 
539 /* The "__do_*" operations below provide the actual "base" implementation
540  * for each of the defined accessors. Some of them use the out_* functions
541  * directly, some of them still use EEH, though we might change that in the
542  * future. Those macros below provide the necessary argument swapping and
543  * handling of the IO base for PIO.
544  *
545  * They are themselves used by the macros that define the actual accessors
546  * and can be used by the hooks if any.
547  *
548  * Note that PIO operations are always defined in terms of their corresonding
549  * MMIO operations. That allows platforms like iSeries who want to modify the
550  * behaviour of both to only hook on the MMIO version and get both. It's also
551  * possible to hook directly at the toplevel PIO operation if they have to
552  * be handled differently
553  */
554 #define __do_writeb(val, addr)	out_8(PCI_FIX_ADDR(addr), val)
555 #define __do_writew(val, addr)	out_le16(PCI_FIX_ADDR(addr), val)
556 #define __do_writel(val, addr)	out_le32(PCI_FIX_ADDR(addr), val)
557 #define __do_writeq(val, addr)	out_le64(PCI_FIX_ADDR(addr), val)
558 #define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val)
559 #define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val)
560 #define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val)
561 
562 #ifdef CONFIG_EEH
563 #define __do_readb(addr)	eeh_readb(PCI_FIX_ADDR(addr))
564 #define __do_readw(addr)	eeh_readw(PCI_FIX_ADDR(addr))
565 #define __do_readl(addr)	eeh_readl(PCI_FIX_ADDR(addr))
566 #define __do_readq(addr)	eeh_readq(PCI_FIX_ADDR(addr))
567 #define __do_readw_be(addr)	eeh_readw_be(PCI_FIX_ADDR(addr))
568 #define __do_readl_be(addr)	eeh_readl_be(PCI_FIX_ADDR(addr))
569 #define __do_readq_be(addr)	eeh_readq_be(PCI_FIX_ADDR(addr))
570 #else /* CONFIG_EEH */
571 #define __do_readb(addr)	in_8(PCI_FIX_ADDR(addr))
572 #define __do_readw(addr)	in_le16(PCI_FIX_ADDR(addr))
573 #define __do_readl(addr)	in_le32(PCI_FIX_ADDR(addr))
574 #define __do_readq(addr)	in_le64(PCI_FIX_ADDR(addr))
575 #define __do_readw_be(addr)	in_be16(PCI_FIX_ADDR(addr))
576 #define __do_readl_be(addr)	in_be32(PCI_FIX_ADDR(addr))
577 #define __do_readq_be(addr)	in_be64(PCI_FIX_ADDR(addr))
578 #endif /* !defined(CONFIG_EEH) */
579 
580 #ifdef CONFIG_PPC32
581 #define __do_outb(val, port)	_rec_outb(val, port)
582 #define __do_outw(val, port)	_rec_outw(val, port)
583 #define __do_outl(val, port)	_rec_outl(val, port)
584 #define __do_inb(port)		_rec_inb(port)
585 #define __do_inw(port)		_rec_inw(port)
586 #define __do_inl(port)		_rec_inl(port)
587 #else /* CONFIG_PPC32 */
588 #define __do_outb(val, port)	writeb(val,(PCI_IO_ADDR)_IO_BASE+port);
589 #define __do_outw(val, port)	writew(val,(PCI_IO_ADDR)_IO_BASE+port);
590 #define __do_outl(val, port)	writel(val,(PCI_IO_ADDR)_IO_BASE+port);
591 #define __do_inb(port)		readb((PCI_IO_ADDR)_IO_BASE + port);
592 #define __do_inw(port)		readw((PCI_IO_ADDR)_IO_BASE + port);
593 #define __do_inl(port)		readl((PCI_IO_ADDR)_IO_BASE + port);
594 #endif /* !CONFIG_PPC32 */
595 
596 #ifdef CONFIG_EEH
597 #define __do_readsb(a, b, n)	eeh_readsb(PCI_FIX_ADDR(a), (b), (n))
598 #define __do_readsw(a, b, n)	eeh_readsw(PCI_FIX_ADDR(a), (b), (n))
599 #define __do_readsl(a, b, n)	eeh_readsl(PCI_FIX_ADDR(a), (b), (n))
600 #else /* CONFIG_EEH */
601 #define __do_readsb(a, b, n)	_insb(PCI_FIX_ADDR(a), (b), (n))
602 #define __do_readsw(a, b, n)	_insw(PCI_FIX_ADDR(a), (b), (n))
603 #define __do_readsl(a, b, n)	_insl(PCI_FIX_ADDR(a), (b), (n))
604 #endif /* !CONFIG_EEH */
605 #define __do_writesb(a, b, n)	_outsb(PCI_FIX_ADDR(a),(b),(n))
606 #define __do_writesw(a, b, n)	_outsw(PCI_FIX_ADDR(a),(b),(n))
607 #define __do_writesl(a, b, n)	_outsl(PCI_FIX_ADDR(a),(b),(n))
608 
609 #define __do_insb(p, b, n)	readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
610 #define __do_insw(p, b, n)	readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
611 #define __do_insl(p, b, n)	readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
612 #define __do_outsb(p, b, n)	writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
613 #define __do_outsw(p, b, n)	writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
614 #define __do_outsl(p, b, n)	writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
615 
616 #define __do_memset_io(addr, c, n)	\
617 				_memset_io(PCI_FIX_ADDR(addr), c, n)
618 #define __do_memcpy_toio(dst, src, n)	\
619 				_memcpy_toio(PCI_FIX_ADDR(dst), src, n)
620 
621 #ifdef CONFIG_EEH
622 #define __do_memcpy_fromio(dst, src, n)	\
623 				eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n)
624 #else /* CONFIG_EEH */
625 #define __do_memcpy_fromio(dst, src, n)	\
626 				_memcpy_fromio(dst,PCI_FIX_ADDR(src),n)
627 #endif /* !CONFIG_EEH */
628 
629 #ifdef CONFIG_PPC_INDIRECT_PIO
630 #define DEF_PCI_HOOK_pio(x)	x
631 #else
632 #define DEF_PCI_HOOK_pio(x)	NULL
633 #endif
634 
635 #ifdef CONFIG_PPC_INDIRECT_MMIO
636 #define DEF_PCI_HOOK_mem(x)	x
637 #else
638 #define DEF_PCI_HOOK_mem(x)	NULL
639 #endif
640 
641 /* Structure containing all the hooks */
642 extern struct ppc_pci_io {
643 
644 #define DEF_PCI_AC_RET(name, ret, at, al, space, aa)	ret (*name) at;
645 #define DEF_PCI_AC_NORET(name, at, al, space, aa)	void (*name) at;
646 
647 #include <asm/io-defs.h>
648 
649 #undef DEF_PCI_AC_RET
650 #undef DEF_PCI_AC_NORET
651 
652 } ppc_pci_io;
653 
654 /* The inline wrappers */
655 #define DEF_PCI_AC_RET(name, ret, at, al, space, aa)		\
656 static inline ret name at					\
657 {								\
658 	if (DEF_PCI_HOOK_##space(ppc_pci_io.name) != NULL)	\
659 		return ppc_pci_io.name al;			\
660 	return __do_##name al;					\
661 }
662 
663 #define DEF_PCI_AC_NORET(name, at, al, space, aa)		\
664 static inline void name at					\
665 {								\
666 	if (DEF_PCI_HOOK_##space(ppc_pci_io.name) != NULL)		\
667 		ppc_pci_io.name al;				\
668 	else							\
669 		__do_##name al;					\
670 }
671 
672 #include <asm/io-defs.h>
673 
674 #undef DEF_PCI_AC_RET
675 #undef DEF_PCI_AC_NORET
676 
677 /* Some drivers check for the presence of readq & writeq with
678  * a #ifdef, so we make them happy here.
679  */
680 #define readb readb
681 #define readw readw
682 #define readl readl
683 #define writeb writeb
684 #define writew writew
685 #define writel writel
686 #define readsb readsb
687 #define readsw readsw
688 #define readsl readsl
689 #define writesb writesb
690 #define writesw writesw
691 #define writesl writesl
692 #define inb inb
693 #define inw inw
694 #define inl inl
695 #define outb outb
696 #define outw outw
697 #define outl outl
698 #define insb insb
699 #define insw insw
700 #define insl insl
701 #define outsb outsb
702 #define outsw outsw
703 #define outsl outsl
704 #ifdef __powerpc64__
705 #define readq	readq
706 #define writeq	writeq
707 #endif
708 #define memset_io memset_io
709 #define memcpy_fromio memcpy_fromio
710 #define memcpy_toio memcpy_toio
711 
712 /*
713  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
714  * access
715  */
716 #define xlate_dev_mem_ptr(p)	__va(p)
717 
718 /*
719  * We don't do relaxed operations yet, at least not with this semantic
720  */
721 #define readb_relaxed(addr)	readb(addr)
722 #define readw_relaxed(addr)	readw(addr)
723 #define readl_relaxed(addr)	readl(addr)
724 #define readq_relaxed(addr)	readq(addr)
725 #define writeb_relaxed(v, addr)	writeb(v, addr)
726 #define writew_relaxed(v, addr)	writew(v, addr)
727 #define writel_relaxed(v, addr)	writel(v, addr)
728 #define writeq_relaxed(v, addr)	writeq(v, addr)
729 
730 #ifndef CONFIG_GENERIC_IOMAP
731 /*
732  * Here comes the implementation of the IOMAP interfaces.
733  */
ioread16be(const void __iomem * addr)734 static inline unsigned int ioread16be(const void __iomem *addr)
735 {
736 	return readw_be(addr);
737 }
738 #define ioread16be ioread16be
739 
ioread32be(const void __iomem * addr)740 static inline unsigned int ioread32be(const void __iomem *addr)
741 {
742 	return readl_be(addr);
743 }
744 #define ioread32be ioread32be
745 
746 #ifdef __powerpc64__
ioread64_lo_hi(const void __iomem * addr)747 static inline u64 ioread64_lo_hi(const void __iomem *addr)
748 {
749 	return readq(addr);
750 }
751 #define ioread64_lo_hi ioread64_lo_hi
752 
ioread64_hi_lo(const void __iomem * addr)753 static inline u64 ioread64_hi_lo(const void __iomem *addr)
754 {
755 	return readq(addr);
756 }
757 #define ioread64_hi_lo ioread64_hi_lo
758 
ioread64be(const void __iomem * addr)759 static inline u64 ioread64be(const void __iomem *addr)
760 {
761 	return readq_be(addr);
762 }
763 #define ioread64be ioread64be
764 
ioread64be_lo_hi(const void __iomem * addr)765 static inline u64 ioread64be_lo_hi(const void __iomem *addr)
766 {
767 	return readq_be(addr);
768 }
769 #define ioread64be_lo_hi ioread64be_lo_hi
770 
ioread64be_hi_lo(const void __iomem * addr)771 static inline u64 ioread64be_hi_lo(const void __iomem *addr)
772 {
773 	return readq_be(addr);
774 }
775 #define ioread64be_hi_lo ioread64be_hi_lo
776 #endif /* __powerpc64__ */
777 
iowrite16be(u16 val,void __iomem * addr)778 static inline void iowrite16be(u16 val, void __iomem *addr)
779 {
780 	writew_be(val, addr);
781 }
782 #define iowrite16be iowrite16be
783 
iowrite32be(u32 val,void __iomem * addr)784 static inline void iowrite32be(u32 val, void __iomem *addr)
785 {
786 	writel_be(val, addr);
787 }
788 #define iowrite32be iowrite32be
789 
790 #ifdef __powerpc64__
iowrite64_lo_hi(u64 val,void __iomem * addr)791 static inline void iowrite64_lo_hi(u64 val, void __iomem *addr)
792 {
793 	writeq(val, addr);
794 }
795 #define iowrite64_lo_hi iowrite64_lo_hi
796 
iowrite64_hi_lo(u64 val,void __iomem * addr)797 static inline void iowrite64_hi_lo(u64 val, void __iomem *addr)
798 {
799 	writeq(val, addr);
800 }
801 #define iowrite64_hi_lo iowrite64_hi_lo
802 
iowrite64be(u64 val,void __iomem * addr)803 static inline void iowrite64be(u64 val, void __iomem *addr)
804 {
805 	writeq_be(val, addr);
806 }
807 #define iowrite64be iowrite64be
808 
iowrite64be_lo_hi(u64 val,void __iomem * addr)809 static inline void iowrite64be_lo_hi(u64 val, void __iomem *addr)
810 {
811 	writeq_be(val, addr);
812 }
813 #define iowrite64be_lo_hi iowrite64be_lo_hi
814 
iowrite64be_hi_lo(u64 val,void __iomem * addr)815 static inline void iowrite64be_hi_lo(u64 val, void __iomem *addr)
816 {
817 	writeq_be(val, addr);
818 }
819 #define iowrite64be_hi_lo iowrite64be_hi_lo
820 #endif /* __powerpc64__ */
821 
822 struct pci_dev;
823 void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
824 #define pci_iounmap pci_iounmap
825 void __iomem *ioport_map(unsigned long port, unsigned int len);
826 #define ioport_map ioport_map
827 #endif
828 
iosync(void)829 static inline void iosync(void)
830 {
831         __asm__ __volatile__ ("sync" : : : "memory");
832 }
833 
834 /* Enforce in-order execution of data I/O.
835  * No distinction between read/write on PPC; use eieio for all three.
836  * Those are fairly week though. They don't provide a barrier between
837  * MMIO and cacheable storage nor do they provide a barrier vs. locks,
838  * they only provide barriers between 2 __raw MMIO operations and
839  * possibly break write combining.
840  */
841 #define iobarrier_rw() eieio()
842 #define iobarrier_r()  eieio()
843 #define iobarrier_w()  eieio()
844 
845 
846 /*
847  * output pause versions need a delay at least for the
848  * w83c105 ide controller in a p610.
849  */
850 #define inb_p(port)             inb(port)
851 #define outb_p(val, port)       (udelay(1), outb((val), (port)))
852 #define inw_p(port)             inw(port)
853 #define outw_p(val, port)       (udelay(1), outw((val), (port)))
854 #define inl_p(port)             inl(port)
855 #define outl_p(val, port)       (udelay(1), outl((val), (port)))
856 
857 
858 #define IO_SPACE_LIMIT ~(0UL)
859 
860 /**
861  * ioremap     -   map bus memory into CPU space
862  * @address:   bus address of the memory
863  * @size:      size of the resource to map
864  *
865  * ioremap performs a platform specific sequence of operations to
866  * make bus memory CPU accessible via the readb/readw/readl/writeb/
867  * writew/writel functions and the other mmio helpers. The returned
868  * address is not guaranteed to be usable directly as a virtual
869  * address.
870  *
871  * We provide a few variations of it:
872  *
873  * * ioremap is the standard one and provides non-cacheable guarded mappings
874  *   and can be hooked by the platform via ppc_md
875  *
876  * * ioremap_prot allows to specify the page flags as an argument and can
877  *   also be hooked by the platform via ppc_md.
878  *
879  * * ioremap_wc enables write combining
880  *
881  * * ioremap_wt enables write through
882  *
883  * * ioremap_coherent maps coherent cached memory
884  *
885  * * iounmap undoes such a mapping and can be hooked
886  *
887  * * __ioremap_caller is the same as above but takes an explicit caller
888  *   reference rather than using __builtin_return_address(0)
889  *
890  */
891 extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
892 #define ioremap ioremap
893 #define ioremap_prot ioremap_prot
894 extern void __iomem *ioremap_wc(phys_addr_t address, unsigned long size);
895 #define ioremap_wc ioremap_wc
896 
897 #ifdef CONFIG_PPC32
898 void __iomem *ioremap_wt(phys_addr_t address, unsigned long size);
899 #define ioremap_wt ioremap_wt
900 #endif
901 
902 void __iomem *ioremap_coherent(phys_addr_t address, unsigned long size);
903 #define ioremap_uc(addr, size)		ioremap((addr), (size))
904 #define ioremap_cache(addr, size) \
905 	ioremap_prot((addr), (size), pgprot_val(PAGE_KERNEL))
906 
907 #define iounmap iounmap
908 
909 void __iomem *ioremap_phb(phys_addr_t paddr, unsigned long size);
910 
911 int early_ioremap_range(unsigned long ea, phys_addr_t pa,
912 			unsigned long size, pgprot_t prot);
913 
914 extern void __iomem *__ioremap_caller(phys_addr_t, unsigned long size,
915 				      pgprot_t prot, void *caller);
916 
917 /*
918  * When CONFIG_PPC_INDIRECT_PIO is set, we use the generic iomap implementation
919  * which needs some additional definitions here. They basically allow PIO
920  * space overall to be 1GB. This will work as long as we never try to use
921  * iomap to map MMIO below 1GB which should be fine on ppc64
922  */
923 #define HAVE_ARCH_PIO_SIZE		1
924 #define PIO_OFFSET			0x00000000UL
925 #define PIO_MASK			(FULL_IO_SIZE - 1)
926 #define PIO_RESERVED			(FULL_IO_SIZE)
927 
928 #define mmio_read16be(addr)		readw_be(addr)
929 #define mmio_read32be(addr)		readl_be(addr)
930 #define mmio_read64be(addr)		readq_be(addr)
931 #define mmio_write16be(val, addr)	writew_be(val, addr)
932 #define mmio_write32be(val, addr)	writel_be(val, addr)
933 #define mmio_write64be(val, addr)	writeq_be(val, addr)
934 #define mmio_insb(addr, dst, count)	readsb(addr, dst, count)
935 #define mmio_insw(addr, dst, count)	readsw(addr, dst, count)
936 #define mmio_insl(addr, dst, count)	readsl(addr, dst, count)
937 #define mmio_outsb(addr, src, count)	writesb(addr, src, count)
938 #define mmio_outsw(addr, src, count)	writesw(addr, src, count)
939 #define mmio_outsl(addr, src, count)	writesl(addr, src, count)
940 
941 /**
942  *	virt_to_phys	-	map virtual addresses to physical
943  *	@address: address to remap
944  *
945  *	The returned physical address is the physical (CPU) mapping for
946  *	the memory address given. It is only valid to use this function on
947  *	addresses directly mapped or allocated via kmalloc.
948  *
949  *	This function does not give bus mappings for DMA transfers. In
950  *	almost all conceivable cases a device driver should not be using
951  *	this function
952  */
virt_to_phys(volatile void * address)953 static inline unsigned long virt_to_phys(volatile void * address)
954 {
955 	WARN_ON(IS_ENABLED(CONFIG_DEBUG_VIRTUAL) && !virt_addr_valid(address));
956 
957 	return __pa((unsigned long)address);
958 }
959 #define virt_to_phys virt_to_phys
960 
961 /**
962  *	phys_to_virt	-	map physical address to virtual
963  *	@address: address to remap
964  *
965  *	The returned virtual address is a current CPU mapping for
966  *	the memory address given. It is only valid to use this function on
967  *	addresses that have a kernel mapping
968  *
969  *	This function does not handle bus mappings for DMA transfers. In
970  *	almost all conceivable cases a device driver should not be using
971  *	this function
972  */
phys_to_virt(unsigned long address)973 static inline void * phys_to_virt(unsigned long address)
974 {
975 	return (void *)__va(address);
976 }
977 #define phys_to_virt phys_to_virt
978 
979 /*
980  * Change "struct page" to physical address.
981  */
page_to_phys(struct page * page)982 static inline phys_addr_t page_to_phys(struct page *page)
983 {
984 	unsigned long pfn = page_to_pfn(page);
985 
986 	WARN_ON(IS_ENABLED(CONFIG_DEBUG_VIRTUAL) && !pfn_valid(pfn));
987 
988 	return PFN_PHYS(pfn);
989 }
990 
991 /*
992  * 32 bits still uses virt_to_bus() for it's implementation of DMA
993  * mappings se we have to keep it defined here. We also have some old
994  * drivers (shame shame shame) that use bus_to_virt() and haven't been
995  * fixed yet so I need to define it here.
996  */
997 #ifdef CONFIG_PPC32
998 
virt_to_bus(volatile void * address)999 static inline unsigned long virt_to_bus(volatile void * address)
1000 {
1001         if (address == NULL)
1002 		return 0;
1003         return __pa(address) + PCI_DRAM_OFFSET;
1004 }
1005 #define virt_to_bus virt_to_bus
1006 
bus_to_virt(unsigned long address)1007 static inline void * bus_to_virt(unsigned long address)
1008 {
1009         if (address == 0)
1010 		return NULL;
1011         return __va(address - PCI_DRAM_OFFSET);
1012 }
1013 #define bus_to_virt bus_to_virt
1014 
1015 #endif /* CONFIG_PPC32 */
1016 
1017 /* access ports */
1018 #define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) |  (_v))
1019 #define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
1020 
1021 #define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) |  (_v))
1022 #define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
1023 
1024 #define setbits8(_addr, _v) out_8((_addr), in_8(_addr) |  (_v))
1025 #define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
1026 
1027 /* Clear and set bits in one shot.  These macros can be used to clear and
1028  * set multiple bits in a register using a single read-modify-write.  These
1029  * macros can also be used to set a multiple-bit bit pattern using a mask,
1030  * by specifying the mask in the 'clear' parameter and the new bit pattern
1031  * in the 'set' parameter.
1032  */
1033 
1034 #define clrsetbits(type, addr, clear, set) \
1035 	out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
1036 
1037 #ifdef __powerpc64__
1038 #define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set)
1039 #define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set)
1040 #endif
1041 
1042 #define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
1043 #define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
1044 
1045 #define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
1046 #define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
1047 
1048 #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
1049 
1050 #include <asm-generic/io.h>
1051 
1052 #endif /* __KERNEL__ */
1053 
1054 #endif /* _ASM_POWERPC_IO_H */
1055