1 /*
2  *  Copyright (C) 1994-1998	   Linus Torvalds & authors (see below)
3  *  Copyright (C) 1998-2002	   Linux ATA Development
4  *				      Andre Hedrick <andre@linux-ide.org>
5  *  Copyright (C) 2003		   Red Hat
6  *  Copyright (C) 2003-2005, 2007  Bartlomiej Zolnierkiewicz
7  */
8 
9 /*
10  *  Mostly written by Mark Lord <mlord@pobox.com>
11  *                and Gadi Oxman <gadio@netvision.net.il>
12  *                and Andre Hedrick <andre@linux-ide.org>
13  *
14  * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
15  */
16 
17 #include <linux/types.h>
18 #include <linux/string.h>
19 #include <linux/kernel.h>
20 #include <linux/timer.h>
21 #include <linux/mm.h>
22 #include <linux/interrupt.h>
23 #include <linux/major.h>
24 #include <linux/errno.h>
25 #include <linux/genhd.h>
26 #include <linux/slab.h>
27 #include <linux/delay.h>
28 #include <linux/mutex.h>
29 #include <linux/leds.h>
30 #include <linux/ide.h>
31 
32 #include <asm/byteorder.h>
33 #include <asm/irq.h>
34 #include <asm/uaccess.h>
35 #include <asm/io.h>
36 #include <asm/div64.h>
37 
38 #include "ide-disk.h"
39 
40 static const u8 ide_rw_cmds[] = {
41 	ATA_CMD_READ_MULTI,
42 	ATA_CMD_WRITE_MULTI,
43 	ATA_CMD_READ_MULTI_EXT,
44 	ATA_CMD_WRITE_MULTI_EXT,
45 	ATA_CMD_PIO_READ,
46 	ATA_CMD_PIO_WRITE,
47 	ATA_CMD_PIO_READ_EXT,
48 	ATA_CMD_PIO_WRITE_EXT,
49 	ATA_CMD_READ,
50 	ATA_CMD_WRITE,
51 	ATA_CMD_READ_EXT,
52 	ATA_CMD_WRITE_EXT,
53 };
54 
ide_tf_set_cmd(ide_drive_t * drive,struct ide_cmd * cmd,u8 dma)55 static void ide_tf_set_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 dma)
56 {
57 	u8 index, lba48, write;
58 
59 	lba48 = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0;
60 	write = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0;
61 
62 	if (dma) {
63 		cmd->protocol = ATA_PROT_DMA;
64 		index = 8;
65 	} else {
66 		cmd->protocol = ATA_PROT_PIO;
67 		if (drive->mult_count) {
68 			cmd->tf_flags |= IDE_TFLAG_MULTI_PIO;
69 			index = 0;
70 		} else
71 			index = 4;
72 	}
73 
74 	cmd->tf.command = ide_rw_cmds[index + lba48 + write];
75 }
76 
77 /*
78  * __ide_do_rw_disk() issues READ and WRITE commands to a disk,
79  * using LBA if supported, or CHS otherwise, to address sectors.
80  */
__ide_do_rw_disk(ide_drive_t * drive,struct request * rq,sector_t block)81 static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
82 					sector_t block)
83 {
84 	ide_hwif_t *hwif	= drive->hwif;
85 	u16 nsectors		= (u16)blk_rq_sectors(rq);
86 	u8 lba48		= !!(drive->dev_flags & IDE_DFLAG_LBA48);
87 	u8 dma			= !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
88 	struct ide_cmd		cmd;
89 	struct ide_taskfile	*tf = &cmd.tf;
90 	ide_startstop_t		rc;
91 
92 	if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) {
93 		if (block + blk_rq_sectors(rq) > 1ULL << 28)
94 			dma = 0;
95 		else
96 			lba48 = 0;
97 	}
98 
99 	memset(&cmd, 0, sizeof(cmd));
100 	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
101 	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
102 
103 	if (drive->dev_flags & IDE_DFLAG_LBA) {
104 		if (lba48) {
105 			pr_debug("%s: LBA=0x%012llx\n", drive->name,
106 					(unsigned long long)block);
107 
108 			tf->nsect  = nsectors & 0xff;
109 			tf->lbal   = (u8) block;
110 			tf->lbam   = (u8)(block >>  8);
111 			tf->lbah   = (u8)(block >> 16);
112 			tf->device = ATA_LBA;
113 
114 			tf = &cmd.hob;
115 			tf->nsect = (nsectors >> 8) & 0xff;
116 			tf->lbal  = (u8)(block >> 24);
117 			if (sizeof(block) != 4) {
118 				tf->lbam = (u8)((u64)block >> 32);
119 				tf->lbah = (u8)((u64)block >> 40);
120 			}
121 
122 			cmd.valid.out.hob = IDE_VALID_OUT_HOB;
123 			cmd.valid.in.hob  = IDE_VALID_IN_HOB;
124 			cmd.tf_flags |= IDE_TFLAG_LBA48;
125 		} else {
126 			tf->nsect  = nsectors & 0xff;
127 			tf->lbal   = block;
128 			tf->lbam   = block >>= 8;
129 			tf->lbah   = block >>= 8;
130 			tf->device = ((block >> 8) & 0xf) | ATA_LBA;
131 		}
132 	} else {
133 		unsigned int sect, head, cyl, track;
134 
135 		track = (int)block / drive->sect;
136 		sect  = (int)block % drive->sect + 1;
137 		head  = track % drive->head;
138 		cyl   = track / drive->head;
139 
140 		pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
141 
142 		tf->nsect  = nsectors & 0xff;
143 		tf->lbal   = sect;
144 		tf->lbam   = cyl;
145 		tf->lbah   = cyl >> 8;
146 		tf->device = head;
147 	}
148 
149 	cmd.tf_flags |= IDE_TFLAG_FS;
150 
151 	if (rq_data_dir(rq))
152 		cmd.tf_flags |= IDE_TFLAG_WRITE;
153 
154 	ide_tf_set_cmd(drive, &cmd, dma);
155 	cmd.rq = rq;
156 
157 	if (dma == 0) {
158 		ide_init_sg_cmd(&cmd, nsectors << 9);
159 		ide_map_sg(drive, &cmd);
160 	}
161 
162 	rc = do_rw_taskfile(drive, &cmd);
163 
164 	if (rc == ide_stopped && dma) {
165 		/* fallback to PIO */
166 		cmd.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK;
167 		ide_tf_set_cmd(drive, &cmd, 0);
168 		ide_init_sg_cmd(&cmd, nsectors << 9);
169 		rc = do_rw_taskfile(drive, &cmd);
170 	}
171 
172 	return rc;
173 }
174 
175 /*
176  * 268435455  == 137439 MB or 28bit limit
177  * 320173056  == 163929 MB or 48bit addressing
178  * 1073741822 == 549756 MB or 48bit addressing fake drive
179  */
180 
ide_do_rw_disk(ide_drive_t * drive,struct request * rq,sector_t block)181 static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
182 				      sector_t block)
183 {
184 	ide_hwif_t *hwif = drive->hwif;
185 
186 	BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
187 	BUG_ON(rq->cmd_type != REQ_TYPE_FS);
188 
189 	ledtrig_ide_activity();
190 
191 	pr_debug("%s: %sing: block=%llu, sectors=%u, buffer=0x%08lx\n",
192 		 drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
193 		 (unsigned long long)block, blk_rq_sectors(rq),
194 		 (unsigned long)rq->buffer);
195 
196 	if (hwif->rw_disk)
197 		hwif->rw_disk(drive, rq);
198 
199 	return __ide_do_rw_disk(drive, rq, block);
200 }
201 
202 /*
203  * Queries for true maximum capacity of the drive.
204  * Returns maximum LBA address (> 0) of the drive, 0 if failed.
205  */
idedisk_read_native_max_address(ide_drive_t * drive,int lba48)206 static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48)
207 {
208 	struct ide_cmd cmd;
209 	struct ide_taskfile *tf = &cmd.tf;
210 	u64 addr = 0;
211 
212 	memset(&cmd, 0, sizeof(cmd));
213 	if (lba48)
214 		tf->command = ATA_CMD_READ_NATIVE_MAX_EXT;
215 	else
216 		tf->command = ATA_CMD_READ_NATIVE_MAX;
217 	tf->device  = ATA_LBA;
218 
219 	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
220 	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
221 	if (lba48) {
222 		cmd.valid.out.hob = IDE_VALID_OUT_HOB;
223 		cmd.valid.in.hob  = IDE_VALID_IN_HOB;
224 		cmd.tf_flags = IDE_TFLAG_LBA48;
225 	}
226 
227 	ide_no_data_taskfile(drive, &cmd);
228 
229 	/* if OK, compute maximum address value */
230 	if (!(tf->status & ATA_ERR))
231 		addr = ide_get_lba_addr(&cmd, lba48) + 1;
232 
233 	return addr;
234 }
235 
236 /*
237  * Sets maximum virtual LBA address of the drive.
238  * Returns new maximum virtual LBA address (> 0) or 0 on failure.
239  */
idedisk_set_max_address(ide_drive_t * drive,u64 addr_req,int lba48)240 static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48)
241 {
242 	struct ide_cmd cmd;
243 	struct ide_taskfile *tf = &cmd.tf;
244 	u64 addr_set = 0;
245 
246 	addr_req--;
247 
248 	memset(&cmd, 0, sizeof(cmd));
249 	tf->lbal     = (addr_req >>  0) & 0xff;
250 	tf->lbam     = (addr_req >>= 8) & 0xff;
251 	tf->lbah     = (addr_req >>= 8) & 0xff;
252 	if (lba48) {
253 		cmd.hob.lbal = (addr_req >>= 8) & 0xff;
254 		cmd.hob.lbam = (addr_req >>= 8) & 0xff;
255 		cmd.hob.lbah = (addr_req >>= 8) & 0xff;
256 		tf->command  = ATA_CMD_SET_MAX_EXT;
257 	} else {
258 		tf->device   = (addr_req >>= 8) & 0x0f;
259 		tf->command  = ATA_CMD_SET_MAX;
260 	}
261 	tf->device |= ATA_LBA;
262 
263 	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
264 	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
265 	if (lba48) {
266 		cmd.valid.out.hob = IDE_VALID_OUT_HOB;
267 		cmd.valid.in.hob  = IDE_VALID_IN_HOB;
268 		cmd.tf_flags = IDE_TFLAG_LBA48;
269 	}
270 
271 	ide_no_data_taskfile(drive, &cmd);
272 
273 	/* if OK, compute maximum address value */
274 	if (!(tf->status & ATA_ERR))
275 		addr_set = ide_get_lba_addr(&cmd, lba48) + 1;
276 
277 	return addr_set;
278 }
279 
sectors_to_MB(unsigned long long n)280 static unsigned long long sectors_to_MB(unsigned long long n)
281 {
282 	n <<= 9;		/* make it bytes */
283 	do_div(n, 1000000);	/* make it MB */
284 	return n;
285 }
286 
287 /*
288  * Some disks report total number of sectors instead of
289  * maximum sector address.  We list them here.
290  */
291 static const struct drive_list_entry hpa_list[] = {
292 	{ "ST340823A",	NULL },
293 	{ "ST320413A",	NULL },
294 	{ "ST310211A",	NULL },
295 	{ NULL,		NULL }
296 };
297 
ide_disk_hpa_get_native_capacity(ide_drive_t * drive,int lba48)298 static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48)
299 {
300 	u64 capacity, set_max;
301 
302 	capacity = drive->capacity64;
303 	set_max  = idedisk_read_native_max_address(drive, lba48);
304 
305 	if (ide_in_drive_list(drive->id, hpa_list)) {
306 		/*
307 		 * Since we are inclusive wrt to firmware revisions do this
308 		 * extra check and apply the workaround only when needed.
309 		 */
310 		if (set_max == capacity + 1)
311 			set_max--;
312 	}
313 
314 	return set_max;
315 }
316 
ide_disk_hpa_set_capacity(ide_drive_t * drive,u64 set_max,int lba48)317 static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48)
318 {
319 	set_max = idedisk_set_max_address(drive, set_max, lba48);
320 	if (set_max)
321 		drive->capacity64 = set_max;
322 
323 	return set_max;
324 }
325 
idedisk_check_hpa(ide_drive_t * drive)326 static void idedisk_check_hpa(ide_drive_t *drive)
327 {
328 	u64 capacity, set_max;
329 	int lba48 = ata_id_lba48_enabled(drive->id);
330 
331 	capacity = drive->capacity64;
332 	set_max  = ide_disk_hpa_get_native_capacity(drive, lba48);
333 
334 	if (set_max <= capacity)
335 		return;
336 
337 	drive->probed_capacity = set_max;
338 
339 	printk(KERN_INFO "%s: Host Protected Area detected.\n"
340 			 "\tcurrent capacity is %llu sectors (%llu MB)\n"
341 			 "\tnative  capacity is %llu sectors (%llu MB)\n",
342 			 drive->name,
343 			 capacity, sectors_to_MB(capacity),
344 			 set_max, sectors_to_MB(set_max));
345 
346 	if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0)
347 		return;
348 
349 	set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48);
350 	if (set_max)
351 		printk(KERN_INFO "%s: Host Protected Area disabled.\n",
352 				 drive->name);
353 }
354 
ide_disk_get_capacity(ide_drive_t * drive)355 static int ide_disk_get_capacity(ide_drive_t *drive)
356 {
357 	u16 *id = drive->id;
358 	int lba;
359 
360 	if (ata_id_lba48_enabled(id)) {
361 		/* drive speaks 48-bit LBA */
362 		lba = 1;
363 		drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
364 	} else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
365 		/* drive speaks 28-bit LBA */
366 		lba = 1;
367 		drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
368 	} else {
369 		/* drive speaks boring old 28-bit CHS */
370 		lba = 0;
371 		drive->capacity64 = drive->cyl * drive->head * drive->sect;
372 	}
373 
374 	drive->probed_capacity = drive->capacity64;
375 
376 	if (lba) {
377 		drive->dev_flags |= IDE_DFLAG_LBA;
378 
379 		/*
380 		* If this device supports the Host Protected Area feature set,
381 		* then we may need to change our opinion about its capacity.
382 		*/
383 		if (ata_id_hpa_enabled(id))
384 			idedisk_check_hpa(drive);
385 	}
386 
387 	/* limit drive capacity to 137GB if LBA48 cannot be used */
388 	if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 &&
389 	    drive->capacity64 > 1ULL << 28) {
390 		printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
391 		       "%llu sectors (%llu MB)\n",
392 		       drive->name, (unsigned long long)drive->capacity64,
393 		       sectors_to_MB(drive->capacity64));
394 		drive->probed_capacity = drive->capacity64 = 1ULL << 28;
395 	}
396 
397 	if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
398 	    (drive->dev_flags & IDE_DFLAG_LBA48)) {
399 		if (drive->capacity64 > 1ULL << 28) {
400 			printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode"
401 					 " will be used for accessing sectors "
402 					 "> %u\n", drive->name, 1 << 28);
403 		} else
404 			drive->dev_flags &= ~IDE_DFLAG_LBA48;
405 	}
406 
407 	return 0;
408 }
409 
ide_disk_unlock_native_capacity(ide_drive_t * drive)410 static void ide_disk_unlock_native_capacity(ide_drive_t *drive)
411 {
412 	u16 *id = drive->id;
413 	int lba48 = ata_id_lba48_enabled(id);
414 
415 	if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 ||
416 	    ata_id_hpa_enabled(id) == 0)
417 		return;
418 
419 	/*
420 	 * according to the spec the SET MAX ADDRESS command shall be
421 	 * immediately preceded by a READ NATIVE MAX ADDRESS command
422 	 */
423 	if (!ide_disk_hpa_get_native_capacity(drive, lba48))
424 		return;
425 
426 	if (ide_disk_hpa_set_capacity(drive, drive->probed_capacity, lba48))
427 		drive->dev_flags |= IDE_DFLAG_NOHPA; /* disable HPA on resume */
428 }
429 
idedisk_prep_fn(struct request_queue * q,struct request * rq)430 static int idedisk_prep_fn(struct request_queue *q, struct request *rq)
431 {
432 	ide_drive_t *drive = q->queuedata;
433 	struct ide_cmd *cmd;
434 
435 	if (!(rq->cmd_flags & REQ_FLUSH))
436 		return BLKPREP_OK;
437 
438 	if (rq->special) {
439 		cmd = rq->special;
440 		memset(cmd, 0, sizeof(*cmd));
441 	} else {
442 		cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
443 	}
444 
445 	/* FIXME: map struct ide_taskfile on rq->cmd[] */
446 	BUG_ON(cmd == NULL);
447 
448 	if (ata_id_flush_ext_enabled(drive->id) &&
449 	    (drive->capacity64 >= (1UL << 28)))
450 		cmd->tf.command = ATA_CMD_FLUSH_EXT;
451 	else
452 		cmd->tf.command = ATA_CMD_FLUSH;
453 	cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
454 	cmd->tf_flags = IDE_TFLAG_DYN;
455 	cmd->protocol = ATA_PROT_NODATA;
456 
457 	rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
458 	rq->special = cmd;
459 	cmd->rq = rq;
460 
461 	return BLKPREP_OK;
462 }
463 
464 ide_devset_get(multcount, mult_count);
465 
466 /*
467  * This is tightly woven into the driver->do_special can not touch.
468  * DON'T do it again until a total personality rewrite is committed.
469  */
set_multcount(ide_drive_t * drive,int arg)470 static int set_multcount(ide_drive_t *drive, int arg)
471 {
472 	struct request *rq;
473 	int error;
474 
475 	if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
476 		return -EINVAL;
477 
478 	if (drive->special_flags & IDE_SFLAG_SET_MULTMODE)
479 		return -EBUSY;
480 
481 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
482 	rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
483 
484 	drive->mult_req = arg;
485 	drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
486 	error = blk_execute_rq(drive->queue, NULL, rq, 0);
487 	blk_put_request(rq);
488 
489 	return (drive->mult_count == arg) ? 0 : -EIO;
490 }
491 
492 ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR);
493 
set_nowerr(ide_drive_t * drive,int arg)494 static int set_nowerr(ide_drive_t *drive, int arg)
495 {
496 	if (arg < 0 || arg > 1)
497 		return -EINVAL;
498 
499 	if (arg)
500 		drive->dev_flags |= IDE_DFLAG_NOWERR;
501 	else
502 		drive->dev_flags &= ~IDE_DFLAG_NOWERR;
503 
504 	drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
505 
506 	return 0;
507 }
508 
ide_do_setfeature(ide_drive_t * drive,u8 feature,u8 nsect)509 static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect)
510 {
511 	struct ide_cmd cmd;
512 
513 	memset(&cmd, 0, sizeof(cmd));
514 	cmd.tf.feature = feature;
515 	cmd.tf.nsect   = nsect;
516 	cmd.tf.command = ATA_CMD_SET_FEATURES;
517 	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
518 	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
519 
520 	return ide_no_data_taskfile(drive, &cmd);
521 }
522 
update_flush(ide_drive_t * drive)523 static void update_flush(ide_drive_t *drive)
524 {
525 	u16 *id = drive->id;
526 	unsigned flush = 0;
527 
528 	if (drive->dev_flags & IDE_DFLAG_WCACHE) {
529 		unsigned long long capacity;
530 		int barrier;
531 		/*
532 		 * We must avoid issuing commands a drive does not
533 		 * understand or we may crash it. We check flush cache
534 		 * is supported. We also check we have the LBA48 flush
535 		 * cache if the drive capacity is too large. By this
536 		 * time we have trimmed the drive capacity if LBA48 is
537 		 * not available so we don't need to recheck that.
538 		 */
539 		capacity = ide_gd_capacity(drive);
540 		barrier = ata_id_flush_enabled(id) &&
541 			(drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 &&
542 			((drive->dev_flags & IDE_DFLAG_LBA48) == 0 ||
543 			 capacity <= (1ULL << 28) ||
544 			 ata_id_flush_ext_enabled(id));
545 
546 		printk(KERN_INFO "%s: cache flushes %ssupported\n",
547 		       drive->name, barrier ? "" : "not ");
548 
549 		if (barrier) {
550 			flush = REQ_FLUSH;
551 			blk_queue_prep_rq(drive->queue, idedisk_prep_fn);
552 		}
553 	}
554 
555 	blk_queue_flush(drive->queue, flush);
556 }
557 
558 ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
559 
set_wcache(ide_drive_t * drive,int arg)560 static int set_wcache(ide_drive_t *drive, int arg)
561 {
562 	int err = 1;
563 
564 	if (arg < 0 || arg > 1)
565 		return -EINVAL;
566 
567 	if (ata_id_flush_enabled(drive->id)) {
568 		err = ide_do_setfeature(drive,
569 			arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0);
570 		if (err == 0) {
571 			if (arg)
572 				drive->dev_flags |= IDE_DFLAG_WCACHE;
573 			else
574 				drive->dev_flags &= ~IDE_DFLAG_WCACHE;
575 		}
576 	}
577 
578 	update_flush(drive);
579 
580 	return err;
581 }
582 
do_idedisk_flushcache(ide_drive_t * drive)583 static int do_idedisk_flushcache(ide_drive_t *drive)
584 {
585 	struct ide_cmd cmd;
586 
587 	memset(&cmd, 0, sizeof(cmd));
588 	if (ata_id_flush_ext_enabled(drive->id))
589 		cmd.tf.command = ATA_CMD_FLUSH_EXT;
590 	else
591 		cmd.tf.command = ATA_CMD_FLUSH;
592 	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
593 	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
594 
595 	return ide_no_data_taskfile(drive, &cmd);
596 }
597 
598 ide_devset_get(acoustic, acoustic);
599 
set_acoustic(ide_drive_t * drive,int arg)600 static int set_acoustic(ide_drive_t *drive, int arg)
601 {
602 	if (arg < 0 || arg > 254)
603 		return -EINVAL;
604 
605 	ide_do_setfeature(drive,
606 		arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg);
607 
608 	drive->acoustic = arg;
609 
610 	return 0;
611 }
612 
613 ide_devset_get_flag(addressing, IDE_DFLAG_LBA48);
614 
615 /*
616  * drive->addressing:
617  *	0: 28-bit
618  *	1: 48-bit
619  *	2: 48-bit capable doing 28-bit
620  */
set_addressing(ide_drive_t * drive,int arg)621 static int set_addressing(ide_drive_t *drive, int arg)
622 {
623 	if (arg < 0 || arg > 2)
624 		return -EINVAL;
625 
626 	if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
627 	    ata_id_lba48_enabled(drive->id) == 0))
628 		return -EIO;
629 
630 	if (arg == 2)
631 		arg = 0;
632 
633 	if (arg)
634 		drive->dev_flags |= IDE_DFLAG_LBA48;
635 	else
636 		drive->dev_flags &= ~IDE_DFLAG_LBA48;
637 
638 	return 0;
639 }
640 
641 ide_ext_devset_rw(acoustic, acoustic);
642 ide_ext_devset_rw(address, addressing);
643 ide_ext_devset_rw(multcount, multcount);
644 ide_ext_devset_rw(wcache, wcache);
645 
646 ide_ext_devset_rw_sync(nowerr, nowerr);
647 
ide_disk_check(ide_drive_t * drive,const char * s)648 static int ide_disk_check(ide_drive_t *drive, const char *s)
649 {
650 	return 1;
651 }
652 
ide_disk_setup(ide_drive_t * drive)653 static void ide_disk_setup(ide_drive_t *drive)
654 {
655 	struct ide_disk_obj *idkp = drive->driver_data;
656 	struct request_queue *q = drive->queue;
657 	ide_hwif_t *hwif = drive->hwif;
658 	u16 *id = drive->id;
659 	char *m = (char *)&id[ATA_ID_PROD];
660 	unsigned long long capacity;
661 
662 	ide_proc_register_driver(drive, idkp->driver);
663 
664 	if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0)
665 		return;
666 
667 	if (drive->dev_flags & IDE_DFLAG_REMOVABLE) {
668 		/*
669 		 * Removable disks (eg. SYQUEST); ignore 'WD' drives
670 		 */
671 		if (m[0] != 'W' || m[1] != 'D')
672 			drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
673 	}
674 
675 	(void)set_addressing(drive, 1);
676 
677 	if (drive->dev_flags & IDE_DFLAG_LBA48) {
678 		int max_s = 2048;
679 
680 		if (max_s > hwif->rqsize)
681 			max_s = hwif->rqsize;
682 
683 		blk_queue_max_hw_sectors(q, max_s);
684 	}
685 
686 	printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
687 	       queue_max_sectors(q) / 2);
688 
689 	if (ata_id_is_ssd(id))
690 		queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
691 
692 	/* calculate drive capacity, and select LBA if possible */
693 	ide_disk_get_capacity(drive);
694 
695 	/*
696 	 * if possible, give fdisk access to more of the drive,
697 	 * by correcting bios_cyls:
698 	 */
699 	capacity = ide_gd_capacity(drive);
700 
701 	if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) {
702 		if (ata_id_lba48_enabled(drive->id)) {
703 			/* compatibility */
704 			drive->bios_sect = 63;
705 			drive->bios_head = 255;
706 		}
707 
708 		if (drive->bios_sect && drive->bios_head) {
709 			unsigned int cap0 = capacity; /* truncate to 32 bits */
710 			unsigned int cylsz, cyl;
711 
712 			if (cap0 != capacity)
713 				drive->bios_cyl = 65535;
714 			else {
715 				cylsz = drive->bios_sect * drive->bios_head;
716 				cyl = cap0 / cylsz;
717 				if (cyl > 65535)
718 					cyl = 65535;
719 				if (cyl > drive->bios_cyl)
720 					drive->bios_cyl = cyl;
721 			}
722 		}
723 	}
724 	printk(KERN_INFO "%s: %llu sectors (%llu MB)",
725 			 drive->name, capacity, sectors_to_MB(capacity));
726 
727 	/* Only print cache size when it was specified */
728 	if (id[ATA_ID_BUF_SIZE])
729 		printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2);
730 
731 	printk(KERN_CONT ", CHS=%d/%d/%d\n",
732 			 drive->bios_cyl, drive->bios_head, drive->bios_sect);
733 
734 	/* write cache enabled? */
735 	if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id))
736 		drive->dev_flags |= IDE_DFLAG_WCACHE;
737 
738 	set_wcache(drive, 1);
739 
740 	if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
741 	    (drive->head == 0 || drive->head > 16)) {
742 		printk(KERN_ERR "%s: invalid geometry: %d physical heads?\n",
743 			drive->name, drive->head);
744 		drive->dev_flags &= ~IDE_DFLAG_ATTACH;
745 	} else
746 		drive->dev_flags |= IDE_DFLAG_ATTACH;
747 }
748 
ide_disk_flush(ide_drive_t * drive)749 static void ide_disk_flush(ide_drive_t *drive)
750 {
751 	if (ata_id_flush_enabled(drive->id) == 0 ||
752 	    (drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
753 		return;
754 
755 	if (do_idedisk_flushcache(drive))
756 		printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
757 }
758 
ide_disk_init_media(ide_drive_t * drive,struct gendisk * disk)759 static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk)
760 {
761 	return 0;
762 }
763 
ide_disk_set_doorlock(ide_drive_t * drive,struct gendisk * disk,int on)764 static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,
765 				 int on)
766 {
767 	struct ide_cmd cmd;
768 	int ret;
769 
770 	if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
771 		return 0;
772 
773 	memset(&cmd, 0, sizeof(cmd));
774 	cmd.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
775 	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
776 	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
777 
778 	ret = ide_no_data_taskfile(drive, &cmd);
779 
780 	if (ret)
781 		drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
782 
783 	return ret;
784 }
785 
786 const struct ide_disk_ops ide_ata_disk_ops = {
787 	.check			= ide_disk_check,
788 	.unlock_native_capacity	= ide_disk_unlock_native_capacity,
789 	.get_capacity		= ide_disk_get_capacity,
790 	.setup			= ide_disk_setup,
791 	.flush			= ide_disk_flush,
792 	.init_media		= ide_disk_init_media,
793 	.set_doorlock		= ide_disk_set_doorlock,
794 	.do_request		= ide_do_rw_disk,
795 	.ioctl			= ide_disk_ioctl,
796 };
797