1 /*
2 * Functions to handle I2O controllers and I2O message handling
3 *
4 * Copyright (C) 1999-2002 Red Hat Software
5 *
6 * Written by Alan Cox, Building Number Three Ltd
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 *
13 * A lot of the I2O message side code from this is taken from the
14 * Red Creek RCPCI45 adapter driver by Red Creek Communications
15 *
16 * Fixes/additions:
17 * Philipp Rumpf
18 * Juha Sievänen <Juha.Sievanen@cs.Helsinki.FI>
19 * Auvo Häkkinen <Auvo.Hakkinen@cs.Helsinki.FI>
20 * Deepak Saxena <deepak@plexity.net>
21 * Boji T Kannanthanam <boji.t.kannanthanam@intel.com>
22 * Alan Cox <alan@lxorguk.ukuu.org.uk>:
23 * Ported to Linux 2.5.
24 * Markus Lidel <Markus.Lidel@shadowconnect.com>:
25 * Minor fixes for 2.6.
26 */
27
28 #include <linux/module.h>
29 #include <linux/i2o.h>
30 #include <linux/delay.h>
31 #include <linux/sched.h>
32 #include <linux/slab.h>
33 #include "core.h"
34
35 #define OSM_NAME "i2o"
36 #define OSM_VERSION "1.325"
37 #define OSM_DESCRIPTION "I2O subsystem"
38
39 /* global I2O controller list */
40 LIST_HEAD(i2o_controllers);
41
42 /*
43 * global I2O System Table. Contains information about all the IOPs in the
44 * system. Used to inform IOPs about each others existence.
45 */
46 static struct i2o_dma i2o_systab;
47
48 static int i2o_hrt_get(struct i2o_controller *c);
49
50 /**
51 * i2o_msg_get_wait - obtain an I2O message from the IOP
52 * @c: I2O controller
53 * @wait: how long to wait until timeout
54 *
55 * This function waits up to wait seconds for a message slot to be
56 * available.
57 *
58 * On a success the message is returned and the pointer to the message is
59 * set in msg. The returned message is the physical page frame offset
60 * address from the read port (see the i2o spec). If no message is
61 * available returns I2O_QUEUE_EMPTY and msg is leaved untouched.
62 */
i2o_msg_get_wait(struct i2o_controller * c,int wait)63 struct i2o_message *i2o_msg_get_wait(struct i2o_controller *c, int wait)
64 {
65 unsigned long timeout = jiffies + wait * HZ;
66 struct i2o_message *msg;
67
68 while (IS_ERR(msg = i2o_msg_get(c))) {
69 if (time_after(jiffies, timeout)) {
70 osm_debug("%s: Timeout waiting for message frame.\n",
71 c->name);
72 return ERR_PTR(-ETIMEDOUT);
73 }
74 schedule_timeout_uninterruptible(1);
75 }
76
77 return msg;
78 };
79
80 #if BITS_PER_LONG == 64
81 /**
82 * i2o_cntxt_list_add - Append a pointer to context list and return a id
83 * @c: controller to which the context list belong
84 * @ptr: pointer to add to the context list
85 *
86 * Because the context field in I2O is only 32-bit large, on 64-bit the
87 * pointer is to large to fit in the context field. The i2o_cntxt_list
88 * functions therefore map pointers to context fields.
89 *
90 * Returns context id > 0 on success or 0 on failure.
91 */
i2o_cntxt_list_add(struct i2o_controller * c,void * ptr)92 u32 i2o_cntxt_list_add(struct i2o_controller * c, void *ptr)
93 {
94 struct i2o_context_list_element *entry;
95 unsigned long flags;
96
97 if (!ptr)
98 osm_err("%s: couldn't add NULL pointer to context list!\n",
99 c->name);
100
101 entry = kmalloc(sizeof(*entry), GFP_ATOMIC);
102 if (!entry) {
103 osm_err("%s: Could not allocate memory for context list element"
104 "\n", c->name);
105 return 0;
106 }
107
108 entry->ptr = ptr;
109 entry->timestamp = jiffies;
110 INIT_LIST_HEAD(&entry->list);
111
112 spin_lock_irqsave(&c->context_list_lock, flags);
113
114 if (unlikely(atomic_inc_and_test(&c->context_list_counter)))
115 atomic_inc(&c->context_list_counter);
116
117 entry->context = atomic_read(&c->context_list_counter);
118
119 list_add(&entry->list, &c->context_list);
120
121 spin_unlock_irqrestore(&c->context_list_lock, flags);
122
123 osm_debug("%s: Add context to list %p -> %d\n", c->name, ptr, context);
124
125 return entry->context;
126 };
127
128 /**
129 * i2o_cntxt_list_remove - Remove a pointer from the context list
130 * @c: controller to which the context list belong
131 * @ptr: pointer which should be removed from the context list
132 *
133 * Removes a previously added pointer from the context list and returns
134 * the matching context id.
135 *
136 * Returns context id on success or 0 on failure.
137 */
i2o_cntxt_list_remove(struct i2o_controller * c,void * ptr)138 u32 i2o_cntxt_list_remove(struct i2o_controller * c, void *ptr)
139 {
140 struct i2o_context_list_element *entry;
141 u32 context = 0;
142 unsigned long flags;
143
144 spin_lock_irqsave(&c->context_list_lock, flags);
145 list_for_each_entry(entry, &c->context_list, list)
146 if (entry->ptr == ptr) {
147 list_del(&entry->list);
148 context = entry->context;
149 kfree(entry);
150 break;
151 }
152 spin_unlock_irqrestore(&c->context_list_lock, flags);
153
154 if (!context)
155 osm_warn("%s: Could not remove nonexistent ptr %p\n", c->name,
156 ptr);
157
158 osm_debug("%s: remove ptr from context list %d -> %p\n", c->name,
159 context, ptr);
160
161 return context;
162 };
163
164 /**
165 * i2o_cntxt_list_get - Get a pointer from the context list and remove it
166 * @c: controller to which the context list belong
167 * @context: context id to which the pointer belong
168 *
169 * Returns pointer to the matching context id on success or NULL on
170 * failure.
171 */
i2o_cntxt_list_get(struct i2o_controller * c,u32 context)172 void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context)
173 {
174 struct i2o_context_list_element *entry;
175 unsigned long flags;
176 void *ptr = NULL;
177
178 spin_lock_irqsave(&c->context_list_lock, flags);
179 list_for_each_entry(entry, &c->context_list, list)
180 if (entry->context == context) {
181 list_del(&entry->list);
182 ptr = entry->ptr;
183 kfree(entry);
184 break;
185 }
186 spin_unlock_irqrestore(&c->context_list_lock, flags);
187
188 if (!ptr)
189 osm_warn("%s: context id %d not found\n", c->name, context);
190
191 osm_debug("%s: get ptr from context list %d -> %p\n", c->name, context,
192 ptr);
193
194 return ptr;
195 };
196
197 /**
198 * i2o_cntxt_list_get_ptr - Get a context id from the context list
199 * @c: controller to which the context list belong
200 * @ptr: pointer to which the context id should be fetched
201 *
202 * Returns context id which matches to the pointer on success or 0 on
203 * failure.
204 */
i2o_cntxt_list_get_ptr(struct i2o_controller * c,void * ptr)205 u32 i2o_cntxt_list_get_ptr(struct i2o_controller * c, void *ptr)
206 {
207 struct i2o_context_list_element *entry;
208 u32 context = 0;
209 unsigned long flags;
210
211 spin_lock_irqsave(&c->context_list_lock, flags);
212 list_for_each_entry(entry, &c->context_list, list)
213 if (entry->ptr == ptr) {
214 context = entry->context;
215 break;
216 }
217 spin_unlock_irqrestore(&c->context_list_lock, flags);
218
219 if (!context)
220 osm_warn("%s: Could not find nonexistent ptr %p\n", c->name,
221 ptr);
222
223 osm_debug("%s: get context id from context list %p -> %d\n", c->name,
224 ptr, context);
225
226 return context;
227 };
228 #endif
229
230 /**
231 * i2o_iop_find - Find an I2O controller by id
232 * @unit: unit number of the I2O controller to search for
233 *
234 * Lookup the I2O controller on the controller list.
235 *
236 * Returns pointer to the I2O controller on success or NULL if not found.
237 */
i2o_find_iop(int unit)238 struct i2o_controller *i2o_find_iop(int unit)
239 {
240 struct i2o_controller *c;
241
242 list_for_each_entry(c, &i2o_controllers, list) {
243 if (c->unit == unit)
244 return c;
245 }
246
247 return NULL;
248 };
249
250 /**
251 * i2o_iop_find_device - Find a I2O device on an I2O controller
252 * @c: I2O controller where the I2O device hangs on
253 * @tid: TID of the I2O device to search for
254 *
255 * Searches the devices of the I2O controller for a device with TID tid and
256 * returns it.
257 *
258 * Returns a pointer to the I2O device if found, otherwise NULL.
259 */
i2o_iop_find_device(struct i2o_controller * c,u16 tid)260 struct i2o_device *i2o_iop_find_device(struct i2o_controller *c, u16 tid)
261 {
262 struct i2o_device *dev;
263
264 list_for_each_entry(dev, &c->devices, list)
265 if (dev->lct_data.tid == tid)
266 return dev;
267
268 return NULL;
269 };
270
271 /**
272 * i2o_quiesce_controller - quiesce controller
273 * @c: controller
274 *
275 * Quiesce an IOP. Causes IOP to make external operation quiescent
276 * (i2o 'READY' state). Internal operation of the IOP continues normally.
277 *
278 * Returns 0 on success or negative error code on failure.
279 */
i2o_iop_quiesce(struct i2o_controller * c)280 static int i2o_iop_quiesce(struct i2o_controller *c)
281 {
282 struct i2o_message *msg;
283 i2o_status_block *sb = c->status_block.virt;
284 int rc;
285
286 i2o_status_get(c);
287
288 /* SysQuiesce discarded if IOP not in READY or OPERATIONAL state */
289 if ((sb->iop_state != ADAPTER_STATE_READY) &&
290 (sb->iop_state != ADAPTER_STATE_OPERATIONAL))
291 return 0;
292
293 msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
294 if (IS_ERR(msg))
295 return PTR_ERR(msg);
296
297 msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0);
298 msg->u.head[1] =
299 cpu_to_le32(I2O_CMD_SYS_QUIESCE << 24 | HOST_TID << 12 |
300 ADAPTER_TID);
301
302 /* Long timeout needed for quiesce if lots of devices */
303 if ((rc = i2o_msg_post_wait(c, msg, 240)))
304 osm_info("%s: Unable to quiesce (status=%#x).\n", c->name, -rc);
305 else
306 osm_debug("%s: Quiesced.\n", c->name);
307
308 i2o_status_get(c); // Entered READY state
309
310 return rc;
311 };
312
313 /**
314 * i2o_iop_enable - move controller from ready to OPERATIONAL
315 * @c: I2O controller
316 *
317 * Enable IOP. This allows the IOP to resume external operations and
318 * reverses the effect of a quiesce. Returns zero or an error code if
319 * an error occurs.
320 */
i2o_iop_enable(struct i2o_controller * c)321 static int i2o_iop_enable(struct i2o_controller *c)
322 {
323 struct i2o_message *msg;
324 i2o_status_block *sb = c->status_block.virt;
325 int rc;
326
327 i2o_status_get(c);
328
329 /* Enable only allowed on READY state */
330 if (sb->iop_state != ADAPTER_STATE_READY)
331 return -EINVAL;
332
333 msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
334 if (IS_ERR(msg))
335 return PTR_ERR(msg);
336
337 msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0);
338 msg->u.head[1] =
339 cpu_to_le32(I2O_CMD_SYS_ENABLE << 24 | HOST_TID << 12 |
340 ADAPTER_TID);
341
342 /* How long of a timeout do we need? */
343 if ((rc = i2o_msg_post_wait(c, msg, 240)))
344 osm_err("%s: Could not enable (status=%#x).\n", c->name, -rc);
345 else
346 osm_debug("%s: Enabled.\n", c->name);
347
348 i2o_status_get(c); // entered OPERATIONAL state
349
350 return rc;
351 };
352
353 /**
354 * i2o_iop_quiesce_all - Quiesce all I2O controllers on the system
355 *
356 * Quiesce all I2O controllers which are connected to the system.
357 */
i2o_iop_quiesce_all(void)358 static inline void i2o_iop_quiesce_all(void)
359 {
360 struct i2o_controller *c, *tmp;
361
362 list_for_each_entry_safe(c, tmp, &i2o_controllers, list) {
363 if (!c->no_quiesce)
364 i2o_iop_quiesce(c);
365 }
366 };
367
368 /**
369 * i2o_iop_enable_all - Enables all controllers on the system
370 *
371 * Enables all I2O controllers which are connected to the system.
372 */
i2o_iop_enable_all(void)373 static inline void i2o_iop_enable_all(void)
374 {
375 struct i2o_controller *c, *tmp;
376
377 list_for_each_entry_safe(c, tmp, &i2o_controllers, list)
378 i2o_iop_enable(c);
379 };
380
381 /**
382 * i2o_clear_controller - Bring I2O controller into HOLD state
383 * @c: controller
384 *
385 * Clear an IOP to HOLD state, ie. terminate external operations, clear all
386 * input queues and prepare for a system restart. IOP's internal operation
387 * continues normally and the outbound queue is alive. The IOP is not
388 * expected to rebuild its LCT.
389 *
390 * Returns 0 on success or negative error code on failure.
391 */
i2o_iop_clear(struct i2o_controller * c)392 static int i2o_iop_clear(struct i2o_controller *c)
393 {
394 struct i2o_message *msg;
395 int rc;
396
397 msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
398 if (IS_ERR(msg))
399 return PTR_ERR(msg);
400
401 /* Quiesce all IOPs first */
402 i2o_iop_quiesce_all();
403
404 msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0);
405 msg->u.head[1] =
406 cpu_to_le32(I2O_CMD_ADAPTER_CLEAR << 24 | HOST_TID << 12 |
407 ADAPTER_TID);
408
409 if ((rc = i2o_msg_post_wait(c, msg, 30)))
410 osm_info("%s: Unable to clear (status=%#x).\n", c->name, -rc);
411 else
412 osm_debug("%s: Cleared.\n", c->name);
413
414 /* Enable all IOPs */
415 i2o_iop_enable_all();
416
417 return rc;
418 }
419
420 /**
421 * i2o_iop_init_outbound_queue - setup the outbound message queue
422 * @c: I2O controller
423 *
424 * Clear and (re)initialize IOP's outbound queue and post the message
425 * frames to the IOP.
426 *
427 * Returns 0 on success or negative error code on failure.
428 */
i2o_iop_init_outbound_queue(struct i2o_controller * c)429 static int i2o_iop_init_outbound_queue(struct i2o_controller *c)
430 {
431 u32 m;
432 volatile u8 *status = c->status.virt;
433 struct i2o_message *msg;
434 ulong timeout;
435 int i;
436
437 osm_debug("%s: Initializing Outbound Queue...\n", c->name);
438
439 memset(c->status.virt, 0, 4);
440
441 msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
442 if (IS_ERR(msg))
443 return PTR_ERR(msg);
444
445 msg->u.head[0] = cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6);
446 msg->u.head[1] =
447 cpu_to_le32(I2O_CMD_OUTBOUND_INIT << 24 | HOST_TID << 12 |
448 ADAPTER_TID);
449 msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context);
450 msg->u.s.tcntxt = cpu_to_le32(0x00000000);
451 msg->body[0] = cpu_to_le32(PAGE_SIZE);
452 /* Outbound msg frame size in words and Initcode */
453 msg->body[1] = cpu_to_le32(I2O_OUTBOUND_MSG_FRAME_SIZE << 16 | 0x80);
454 msg->body[2] = cpu_to_le32(0xd0000004);
455 msg->body[3] = cpu_to_le32(i2o_dma_low(c->status.phys));
456 msg->body[4] = cpu_to_le32(i2o_dma_high(c->status.phys));
457
458 i2o_msg_post(c, msg);
459
460 timeout = jiffies + I2O_TIMEOUT_INIT_OUTBOUND_QUEUE * HZ;
461 while (*status <= I2O_CMD_IN_PROGRESS) {
462 if (time_after(jiffies, timeout)) {
463 osm_warn("%s: Timeout Initializing\n", c->name);
464 return -ETIMEDOUT;
465 }
466 schedule_timeout_uninterruptible(1);
467 }
468
469 m = c->out_queue.phys;
470
471 /* Post frames */
472 for (i = 0; i < I2O_MAX_OUTBOUND_MSG_FRAMES; i++) {
473 i2o_flush_reply(c, m);
474 udelay(1); /* Promise */
475 m += I2O_OUTBOUND_MSG_FRAME_SIZE * sizeof(u32);
476 }
477
478 return 0;
479 }
480
481 /**
482 * i2o_iop_reset - reset an I2O controller
483 * @c: controller to reset
484 *
485 * Reset the IOP into INIT state and wait until IOP gets into RESET state.
486 * Terminate all external operations, clear IOP's inbound and outbound
487 * queues, terminate all DDMs, and reload the IOP's operating environment
488 * and all local DDMs. The IOP rebuilds its LCT.
489 */
i2o_iop_reset(struct i2o_controller * c)490 static int i2o_iop_reset(struct i2o_controller *c)
491 {
492 volatile u8 *status = c->status.virt;
493 struct i2o_message *msg;
494 unsigned long timeout;
495 i2o_status_block *sb = c->status_block.virt;
496 int rc = 0;
497
498 osm_debug("%s: Resetting controller\n", c->name);
499
500 msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
501 if (IS_ERR(msg))
502 return PTR_ERR(msg);
503
504 memset(c->status_block.virt, 0, 8);
505
506 /* Quiesce all IOPs first */
507 i2o_iop_quiesce_all();
508
509 msg->u.head[0] = cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_0);
510 msg->u.head[1] =
511 cpu_to_le32(I2O_CMD_ADAPTER_RESET << 24 | HOST_TID << 12 |
512 ADAPTER_TID);
513 msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context);
514 msg->u.s.tcntxt = cpu_to_le32(0x00000000);
515 msg->body[0] = cpu_to_le32(0x00000000);
516 msg->body[1] = cpu_to_le32(0x00000000);
517 msg->body[2] = cpu_to_le32(i2o_dma_low(c->status.phys));
518 msg->body[3] = cpu_to_le32(i2o_dma_high(c->status.phys));
519
520 i2o_msg_post(c, msg);
521
522 /* Wait for a reply */
523 timeout = jiffies + I2O_TIMEOUT_RESET * HZ;
524 while (!*status) {
525 if (time_after(jiffies, timeout))
526 break;
527
528 schedule_timeout_uninterruptible(1);
529 }
530
531 switch (*status) {
532 case I2O_CMD_REJECTED:
533 osm_warn("%s: IOP reset rejected\n", c->name);
534 rc = -EPERM;
535 break;
536
537 case I2O_CMD_IN_PROGRESS:
538 /*
539 * Once the reset is sent, the IOP goes into the INIT state
540 * which is indeterminate. We need to wait until the IOP has
541 * rebooted before we can let the system talk to it. We read
542 * the inbound Free_List until a message is available. If we
543 * can't read one in the given amount of time, we assume the
544 * IOP could not reboot properly.
545 */
546 osm_debug("%s: Reset in progress, waiting for reboot...\n",
547 c->name);
548
549 while (IS_ERR(msg = i2o_msg_get_wait(c, I2O_TIMEOUT_RESET))) {
550 if (time_after(jiffies, timeout)) {
551 osm_err("%s: IOP reset timeout.\n", c->name);
552 rc = PTR_ERR(msg);
553 goto exit;
554 }
555 schedule_timeout_uninterruptible(1);
556 }
557 i2o_msg_nop(c, msg);
558
559 /* from here all quiesce commands are safe */
560 c->no_quiesce = 0;
561
562 /* verify if controller is in state RESET */
563 i2o_status_get(c);
564
565 if (!c->promise && (sb->iop_state != ADAPTER_STATE_RESET))
566 osm_warn("%s: reset completed, but adapter not in RESET"
567 " state.\n", c->name);
568 else
569 osm_debug("%s: reset completed.\n", c->name);
570
571 break;
572
573 default:
574 osm_err("%s: IOP reset timeout.\n", c->name);
575 rc = -ETIMEDOUT;
576 break;
577 }
578
579 exit:
580 /* Enable all IOPs */
581 i2o_iop_enable_all();
582
583 return rc;
584 };
585
586 /**
587 * i2o_iop_activate - Bring controller up to HOLD
588 * @c: controller
589 *
590 * This function brings an I2O controller into HOLD state. The adapter
591 * is reset if necessary and then the queues and resource table are read.
592 *
593 * Returns 0 on success or negative error code on failure.
594 */
i2o_iop_activate(struct i2o_controller * c)595 static int i2o_iop_activate(struct i2o_controller *c)
596 {
597 i2o_status_block *sb = c->status_block.virt;
598 int rc;
599 int state;
600
601 /* In INIT state, Wait Inbound Q to initialize (in i2o_status_get) */
602 /* In READY state, Get status */
603
604 rc = i2o_status_get(c);
605 if (rc) {
606 osm_info("%s: Unable to obtain status, attempting a reset.\n",
607 c->name);
608 rc = i2o_iop_reset(c);
609 if (rc)
610 return rc;
611 }
612
613 if (sb->i2o_version > I2OVER15) {
614 osm_err("%s: Not running version 1.5 of the I2O Specification."
615 "\n", c->name);
616 return -ENODEV;
617 }
618
619 switch (sb->iop_state) {
620 case ADAPTER_STATE_FAULTED:
621 osm_err("%s: hardware fault\n", c->name);
622 return -EFAULT;
623
624 case ADAPTER_STATE_READY:
625 case ADAPTER_STATE_OPERATIONAL:
626 case ADAPTER_STATE_HOLD:
627 case ADAPTER_STATE_FAILED:
628 osm_debug("%s: already running, trying to reset...\n", c->name);
629 rc = i2o_iop_reset(c);
630 if (rc)
631 return rc;
632 }
633
634 /* preserve state */
635 state = sb->iop_state;
636
637 rc = i2o_iop_init_outbound_queue(c);
638 if (rc)
639 return rc;
640
641 /* if adapter was not in RESET state clear now */
642 if (state != ADAPTER_STATE_RESET)
643 i2o_iop_clear(c);
644
645 i2o_status_get(c);
646
647 if (sb->iop_state != ADAPTER_STATE_HOLD) {
648 osm_err("%s: failed to bring IOP into HOLD state\n", c->name);
649 return -EIO;
650 }
651
652 return i2o_hrt_get(c);
653 };
654
655 /**
656 * i2o_iop_systab_set - Set the I2O System Table of the specified IOP
657 * @c: I2O controller to which the system table should be send
658 *
659 * Before the systab could be set i2o_systab_build() must be called.
660 *
661 * Returns 0 on success or negative error code on failure.
662 */
i2o_iop_systab_set(struct i2o_controller * c)663 static int i2o_iop_systab_set(struct i2o_controller *c)
664 {
665 struct i2o_message *msg;
666 i2o_status_block *sb = c->status_block.virt;
667 struct device *dev = &c->pdev->dev;
668 struct resource *root;
669 int rc;
670
671 if (sb->current_mem_size < sb->desired_mem_size) {
672 struct resource *res = &c->mem_resource;
673 res->name = c->pdev->bus->name;
674 res->flags = IORESOURCE_MEM;
675 res->start = 0;
676 res->end = 0;
677 osm_info("%s: requires private memory resources.\n", c->name);
678 root = pci_find_parent_resource(c->pdev, res);
679 if (root == NULL)
680 osm_warn("%s: Can't find parent resource!\n", c->name);
681 if (root && allocate_resource(root, res, sb->desired_mem_size, sb->desired_mem_size, sb->desired_mem_size, 1 << 20, /* Unspecified, so use 1Mb and play safe */
682 NULL, NULL) >= 0) {
683 c->mem_alloc = 1;
684 sb->current_mem_size = 1 + res->end - res->start;
685 sb->current_mem_base = res->start;
686 osm_info("%s: allocated %llu bytes of PCI memory at "
687 "0x%016llX.\n", c->name,
688 (unsigned long long)(1 + res->end - res->start),
689 (unsigned long long)res->start);
690 }
691 }
692
693 if (sb->current_io_size < sb->desired_io_size) {
694 struct resource *res = &c->io_resource;
695 res->name = c->pdev->bus->name;
696 res->flags = IORESOURCE_IO;
697 res->start = 0;
698 res->end = 0;
699 osm_info("%s: requires private memory resources.\n", c->name);
700 root = pci_find_parent_resource(c->pdev, res);
701 if (root == NULL)
702 osm_warn("%s: Can't find parent resource!\n", c->name);
703 if (root && allocate_resource(root, res, sb->desired_io_size, sb->desired_io_size, sb->desired_io_size, 1 << 20, /* Unspecified, so use 1Mb and play safe */
704 NULL, NULL) >= 0) {
705 c->io_alloc = 1;
706 sb->current_io_size = 1 + res->end - res->start;
707 sb->current_mem_base = res->start;
708 osm_info("%s: allocated %llu bytes of PCI I/O at "
709 "0x%016llX.\n", c->name,
710 (unsigned long long)(1 + res->end - res->start),
711 (unsigned long long)res->start);
712 }
713 }
714
715 msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
716 if (IS_ERR(msg))
717 return PTR_ERR(msg);
718
719 i2o_systab.phys = dma_map_single(dev, i2o_systab.virt, i2o_systab.len,
720 PCI_DMA_TODEVICE);
721 if (!i2o_systab.phys) {
722 i2o_msg_nop(c, msg);
723 return -ENOMEM;
724 }
725
726 msg->u.head[0] = cpu_to_le32(I2O_MESSAGE_SIZE(12) | SGL_OFFSET_6);
727 msg->u.head[1] =
728 cpu_to_le32(I2O_CMD_SYS_TAB_SET << 24 | HOST_TID << 12 |
729 ADAPTER_TID);
730
731 /*
732 * Provide three SGL-elements:
733 * System table (SysTab), Private memory space declaration and
734 * Private i/o space declaration
735 */
736
737 msg->body[0] = cpu_to_le32(c->unit + 2);
738 msg->body[1] = cpu_to_le32(0x00000000);
739 msg->body[2] = cpu_to_le32(0x54000000 | i2o_systab.len);
740 msg->body[3] = cpu_to_le32(i2o_systab.phys);
741 msg->body[4] = cpu_to_le32(0x54000000 | sb->current_mem_size);
742 msg->body[5] = cpu_to_le32(sb->current_mem_base);
743 msg->body[6] = cpu_to_le32(0xd4000000 | sb->current_io_size);
744 msg->body[6] = cpu_to_le32(sb->current_io_base);
745
746 rc = i2o_msg_post_wait(c, msg, 120);
747
748 dma_unmap_single(dev, i2o_systab.phys, i2o_systab.len,
749 PCI_DMA_TODEVICE);
750
751 if (rc < 0)
752 osm_err("%s: Unable to set SysTab (status=%#x).\n", c->name,
753 -rc);
754 else
755 osm_debug("%s: SysTab set.\n", c->name);
756
757 return rc;
758 }
759
760 /**
761 * i2o_iop_online - Bring a controller online into OPERATIONAL state.
762 * @c: I2O controller
763 *
764 * Send the system table and enable the I2O controller.
765 *
766 * Returns 0 on success or negative error code on failure.
767 */
i2o_iop_online(struct i2o_controller * c)768 static int i2o_iop_online(struct i2o_controller *c)
769 {
770 int rc;
771
772 rc = i2o_iop_systab_set(c);
773 if (rc)
774 return rc;
775
776 /* In READY state */
777 osm_debug("%s: Attempting to enable...\n", c->name);
778 rc = i2o_iop_enable(c);
779 if (rc)
780 return rc;
781
782 return 0;
783 };
784
785 /**
786 * i2o_iop_remove - Remove the I2O controller from the I2O core
787 * @c: I2O controller
788 *
789 * Remove the I2O controller from the I2O core. If devices are attached to
790 * the controller remove these also and finally reset the controller.
791 */
i2o_iop_remove(struct i2o_controller * c)792 void i2o_iop_remove(struct i2o_controller *c)
793 {
794 struct i2o_device *dev, *tmp;
795
796 osm_debug("%s: deleting controller\n", c->name);
797
798 i2o_driver_notify_controller_remove_all(c);
799
800 list_del(&c->list);
801
802 list_for_each_entry_safe(dev, tmp, &c->devices, list)
803 i2o_device_remove(dev);
804
805 device_del(&c->device);
806
807 /* Ask the IOP to switch to RESET state */
808 i2o_iop_reset(c);
809 }
810
811 /**
812 * i2o_systab_build - Build system table
813 *
814 * The system table contains information about all the IOPs in the system
815 * (duh) and is used by the Executives on the IOPs to establish peer2peer
816 * connections. We're not supporting peer2peer at the moment, but this
817 * will be needed down the road for things like lan2lan forwarding.
818 *
819 * Returns 0 on success or negative error code on failure.
820 */
i2o_systab_build(void)821 static int i2o_systab_build(void)
822 {
823 struct i2o_controller *c, *tmp;
824 int num_controllers = 0;
825 u32 change_ind = 0;
826 int count = 0;
827 struct i2o_sys_tbl *systab = i2o_systab.virt;
828
829 list_for_each_entry_safe(c, tmp, &i2o_controllers, list)
830 num_controllers++;
831
832 if (systab) {
833 change_ind = systab->change_ind;
834 kfree(i2o_systab.virt);
835 }
836
837 /* Header + IOPs */
838 i2o_systab.len = sizeof(struct i2o_sys_tbl) + num_controllers *
839 sizeof(struct i2o_sys_tbl_entry);
840
841 systab = i2o_systab.virt = kzalloc(i2o_systab.len, GFP_KERNEL);
842 if (!systab) {
843 osm_err("unable to allocate memory for System Table\n");
844 return -ENOMEM;
845 }
846
847 systab->version = I2OVERSION;
848 systab->change_ind = change_ind + 1;
849
850 list_for_each_entry_safe(c, tmp, &i2o_controllers, list) {
851 i2o_status_block *sb;
852
853 if (count >= num_controllers) {
854 osm_err("controller added while building system table"
855 "\n");
856 break;
857 }
858
859 sb = c->status_block.virt;
860
861 /*
862 * Get updated IOP state so we have the latest information
863 *
864 * We should delete the controller at this point if it
865 * doesn't respond since if it's not on the system table
866 * it is techninically not part of the I2O subsystem...
867 */
868 if (unlikely(i2o_status_get(c))) {
869 osm_err("%s: Deleting b/c could not get status while "
870 "attempting to build system table\n", c->name);
871 i2o_iop_remove(c);
872 continue; // try the next one
873 }
874
875 systab->iops[count].org_id = sb->org_id;
876 systab->iops[count].iop_id = c->unit + 2;
877 systab->iops[count].seg_num = 0;
878 systab->iops[count].i2o_version = sb->i2o_version;
879 systab->iops[count].iop_state = sb->iop_state;
880 systab->iops[count].msg_type = sb->msg_type;
881 systab->iops[count].frame_size = sb->inbound_frame_size;
882 systab->iops[count].last_changed = change_ind;
883 systab->iops[count].iop_capabilities = sb->iop_capabilities;
884 systab->iops[count].inbound_low =
885 i2o_dma_low(c->base.phys + I2O_IN_PORT);
886 systab->iops[count].inbound_high =
887 i2o_dma_high(c->base.phys + I2O_IN_PORT);
888
889 count++;
890 }
891
892 systab->num_entries = count;
893
894 return 0;
895 };
896
897 /**
898 * i2o_parse_hrt - Parse the hardware resource table.
899 * @c: I2O controller
900 *
901 * We don't do anything with it except dumping it (in debug mode).
902 *
903 * Returns 0.
904 */
i2o_parse_hrt(struct i2o_controller * c)905 static int i2o_parse_hrt(struct i2o_controller *c)
906 {
907 i2o_dump_hrt(c);
908 return 0;
909 };
910
911 /**
912 * i2o_status_get - Get the status block from the I2O controller
913 * @c: I2O controller
914 *
915 * Issue a status query on the controller. This updates the attached
916 * status block. The status block could then be accessed through
917 * c->status_block.
918 *
919 * Returns 0 on success or negative error code on failure.
920 */
i2o_status_get(struct i2o_controller * c)921 int i2o_status_get(struct i2o_controller *c)
922 {
923 struct i2o_message *msg;
924 volatile u8 *status_block;
925 unsigned long timeout;
926
927 status_block = (u8 *) c->status_block.virt;
928 memset(c->status_block.virt, 0, sizeof(i2o_status_block));
929
930 msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
931 if (IS_ERR(msg))
932 return PTR_ERR(msg);
933
934 msg->u.head[0] = cpu_to_le32(NINE_WORD_MSG_SIZE | SGL_OFFSET_0);
935 msg->u.head[1] =
936 cpu_to_le32(I2O_CMD_STATUS_GET << 24 | HOST_TID << 12 |
937 ADAPTER_TID);
938 msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context);
939 msg->u.s.tcntxt = cpu_to_le32(0x00000000);
940 msg->body[0] = cpu_to_le32(0x00000000);
941 msg->body[1] = cpu_to_le32(0x00000000);
942 msg->body[2] = cpu_to_le32(i2o_dma_low(c->status_block.phys));
943 msg->body[3] = cpu_to_le32(i2o_dma_high(c->status_block.phys));
944 msg->body[4] = cpu_to_le32(sizeof(i2o_status_block)); /* always 88 bytes */
945
946 i2o_msg_post(c, msg);
947
948 /* Wait for a reply */
949 timeout = jiffies + I2O_TIMEOUT_STATUS_GET * HZ;
950 while (status_block[87] != 0xFF) {
951 if (time_after(jiffies, timeout)) {
952 osm_err("%s: Get status timeout.\n", c->name);
953 return -ETIMEDOUT;
954 }
955
956 schedule_timeout_uninterruptible(1);
957 }
958
959 #ifdef DEBUG
960 i2o_debug_state(c);
961 #endif
962
963 return 0;
964 }
965
966 /*
967 * i2o_hrt_get - Get the Hardware Resource Table from the I2O controller
968 * @c: I2O controller from which the HRT should be fetched
969 *
970 * The HRT contains information about possible hidden devices but is
971 * mostly useless to us.
972 *
973 * Returns 0 on success or negative error code on failure.
974 */
i2o_hrt_get(struct i2o_controller * c)975 static int i2o_hrt_get(struct i2o_controller *c)
976 {
977 int rc;
978 int i;
979 i2o_hrt *hrt = c->hrt.virt;
980 u32 size = sizeof(i2o_hrt);
981 struct device *dev = &c->pdev->dev;
982
983 for (i = 0; i < I2O_HRT_GET_TRIES; i++) {
984 struct i2o_message *msg;
985
986 msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
987 if (IS_ERR(msg))
988 return PTR_ERR(msg);
989
990 msg->u.head[0] = cpu_to_le32(SIX_WORD_MSG_SIZE | SGL_OFFSET_4);
991 msg->u.head[1] =
992 cpu_to_le32(I2O_CMD_HRT_GET << 24 | HOST_TID << 12 |
993 ADAPTER_TID);
994 msg->body[0] = cpu_to_le32(0xd0000000 | c->hrt.len);
995 msg->body[1] = cpu_to_le32(c->hrt.phys);
996
997 rc = i2o_msg_post_wait_mem(c, msg, 20, &c->hrt);
998
999 if (rc < 0) {
1000 osm_err("%s: Unable to get HRT (status=%#x)\n", c->name,
1001 -rc);
1002 return rc;
1003 }
1004
1005 size = hrt->num_entries * hrt->entry_len << 2;
1006 if (size > c->hrt.len) {
1007 if (i2o_dma_realloc(dev, &c->hrt, size))
1008 return -ENOMEM;
1009 else
1010 hrt = c->hrt.virt;
1011 } else
1012 return i2o_parse_hrt(c);
1013 }
1014
1015 osm_err("%s: Unable to get HRT after %d tries, giving up\n", c->name,
1016 I2O_HRT_GET_TRIES);
1017
1018 return -EBUSY;
1019 }
1020
1021 /**
1022 * i2o_iop_release - release the memory for a I2O controller
1023 * @dev: I2O controller which should be released
1024 *
1025 * Release the allocated memory. This function is called if refcount of
1026 * device reaches 0 automatically.
1027 */
i2o_iop_release(struct device * dev)1028 static void i2o_iop_release(struct device *dev)
1029 {
1030 struct i2o_controller *c = to_i2o_controller(dev);
1031
1032 i2o_iop_free(c);
1033 };
1034
1035 /**
1036 * i2o_iop_alloc - Allocate and initialize a i2o_controller struct
1037 *
1038 * Allocate the necessary memory for a i2o_controller struct and
1039 * initialize the lists and message mempool.
1040 *
1041 * Returns a pointer to the I2O controller or a negative error code on
1042 * failure.
1043 */
i2o_iop_alloc(void)1044 struct i2o_controller *i2o_iop_alloc(void)
1045 {
1046 static int unit = 0; /* 0 and 1 are NULL IOP and Local Host */
1047 struct i2o_controller *c;
1048 char poolname[32];
1049
1050 c = kzalloc(sizeof(*c), GFP_KERNEL);
1051 if (!c) {
1052 osm_err("i2o: Insufficient memory to allocate a I2O controller."
1053 "\n");
1054 return ERR_PTR(-ENOMEM);
1055 }
1056
1057 c->unit = unit++;
1058 sprintf(c->name, "iop%d", c->unit);
1059
1060 snprintf(poolname, sizeof(poolname), "i2o_%s_msg_inpool", c->name);
1061 if (i2o_pool_alloc
1062 (&c->in_msg, poolname, I2O_INBOUND_MSG_FRAME_SIZE * 4 + sizeof(u32),
1063 I2O_MSG_INPOOL_MIN)) {
1064 kfree(c);
1065 return ERR_PTR(-ENOMEM);
1066 };
1067
1068 INIT_LIST_HEAD(&c->devices);
1069 spin_lock_init(&c->lock);
1070 mutex_init(&c->lct_lock);
1071
1072 device_initialize(&c->device);
1073
1074 c->device.release = &i2o_iop_release;
1075
1076 dev_set_name(&c->device, "iop%d", c->unit);
1077
1078 #if BITS_PER_LONG == 64
1079 spin_lock_init(&c->context_list_lock);
1080 atomic_set(&c->context_list_counter, 0);
1081 INIT_LIST_HEAD(&c->context_list);
1082 #endif
1083
1084 return c;
1085 };
1086
1087 /**
1088 * i2o_iop_add - Initialize the I2O controller and add him to the I2O core
1089 * @c: controller
1090 *
1091 * Initialize the I2O controller and if no error occurs add him to the I2O
1092 * core.
1093 *
1094 * Returns 0 on success or negative error code on failure.
1095 */
i2o_iop_add(struct i2o_controller * c)1096 int i2o_iop_add(struct i2o_controller *c)
1097 {
1098 int rc;
1099
1100 if ((rc = device_add(&c->device))) {
1101 osm_err("%s: could not add controller\n", c->name);
1102 goto iop_reset;
1103 }
1104
1105 osm_info("%s: Activating I2O controller...\n", c->name);
1106 osm_info("%s: This may take a few minutes if there are many devices\n",
1107 c->name);
1108
1109 if ((rc = i2o_iop_activate(c))) {
1110 osm_err("%s: could not activate controller\n", c->name);
1111 goto device_del;
1112 }
1113
1114 osm_debug("%s: building sys table...\n", c->name);
1115
1116 if ((rc = i2o_systab_build()))
1117 goto device_del;
1118
1119 osm_debug("%s: online controller...\n", c->name);
1120
1121 if ((rc = i2o_iop_online(c)))
1122 goto device_del;
1123
1124 osm_debug("%s: getting LCT...\n", c->name);
1125
1126 if ((rc = i2o_exec_lct_get(c)))
1127 goto device_del;
1128
1129 list_add(&c->list, &i2o_controllers);
1130
1131 i2o_driver_notify_controller_add_all(c);
1132
1133 osm_info("%s: Controller added\n", c->name);
1134
1135 return 0;
1136
1137 device_del:
1138 device_del(&c->device);
1139
1140 iop_reset:
1141 i2o_iop_reset(c);
1142
1143 return rc;
1144 };
1145
1146 /**
1147 * i2o_event_register - Turn on/off event notification for a I2O device
1148 * @dev: I2O device which should receive the event registration request
1149 * @drv: driver which want to get notified
1150 * @tcntxt: transaction context to use with this notifier
1151 * @evt_mask: mask of events
1152 *
1153 * Create and posts an event registration message to the task. No reply
1154 * is waited for, or expected. If you do not want further notifications,
1155 * call the i2o_event_register again with a evt_mask of 0.
1156 *
1157 * Returns 0 on success or negative error code on failure.
1158 */
i2o_event_register(struct i2o_device * dev,struct i2o_driver * drv,int tcntxt,u32 evt_mask)1159 int i2o_event_register(struct i2o_device *dev, struct i2o_driver *drv,
1160 int tcntxt, u32 evt_mask)
1161 {
1162 struct i2o_controller *c = dev->iop;
1163 struct i2o_message *msg;
1164
1165 msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
1166 if (IS_ERR(msg))
1167 return PTR_ERR(msg);
1168
1169 msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0);
1170 msg->u.head[1] =
1171 cpu_to_le32(I2O_CMD_UTIL_EVT_REGISTER << 24 | HOST_TID << 12 | dev->
1172 lct_data.tid);
1173 msg->u.s.icntxt = cpu_to_le32(drv->context);
1174 msg->u.s.tcntxt = cpu_to_le32(tcntxt);
1175 msg->body[0] = cpu_to_le32(evt_mask);
1176
1177 i2o_msg_post(c, msg);
1178
1179 return 0;
1180 };
1181
1182 /**
1183 * i2o_iop_init - I2O main initialization function
1184 *
1185 * Initialize the I2O drivers (OSM) functions, register the Executive OSM,
1186 * initialize the I2O PCI part and finally initialize I2O device stuff.
1187 *
1188 * Returns 0 on success or negative error code on failure.
1189 */
i2o_iop_init(void)1190 static int __init i2o_iop_init(void)
1191 {
1192 int rc = 0;
1193
1194 printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n");
1195
1196 if ((rc = i2o_driver_init()))
1197 goto exit;
1198
1199 if ((rc = i2o_exec_init()))
1200 goto driver_exit;
1201
1202 if ((rc = i2o_pci_init()))
1203 goto exec_exit;
1204
1205 return 0;
1206
1207 exec_exit:
1208 i2o_exec_exit();
1209
1210 driver_exit:
1211 i2o_driver_exit();
1212
1213 exit:
1214 return rc;
1215 }
1216
1217 /**
1218 * i2o_iop_exit - I2O main exit function
1219 *
1220 * Removes I2O controllers from PCI subsystem and shut down OSMs.
1221 */
i2o_iop_exit(void)1222 static void __exit i2o_iop_exit(void)
1223 {
1224 i2o_pci_exit();
1225 i2o_exec_exit();
1226 i2o_driver_exit();
1227 };
1228
1229 module_init(i2o_iop_init);
1230 module_exit(i2o_iop_exit);
1231
1232 MODULE_AUTHOR("Red Hat Software");
1233 MODULE_LICENSE("GPL");
1234 MODULE_DESCRIPTION(OSM_DESCRIPTION);
1235 MODULE_VERSION(OSM_VERSION);
1236
1237 #if BITS_PER_LONG == 64
1238 EXPORT_SYMBOL(i2o_cntxt_list_add);
1239 EXPORT_SYMBOL(i2o_cntxt_list_get);
1240 EXPORT_SYMBOL(i2o_cntxt_list_remove);
1241 EXPORT_SYMBOL(i2o_cntxt_list_get_ptr);
1242 #endif
1243 EXPORT_SYMBOL(i2o_msg_get_wait);
1244 EXPORT_SYMBOL(i2o_find_iop);
1245 EXPORT_SYMBOL(i2o_iop_find_device);
1246 EXPORT_SYMBOL(i2o_event_register);
1247 EXPORT_SYMBOL(i2o_status_get);
1248 EXPORT_SYMBOL(i2o_controllers);
1249