1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Synopsys DesignWare I2C adapter driver.
4 *
5 * Based on the TI DAVINCI I2C adapter driver.
6 *
7 * Copyright (C) 2006 Texas Instruments.
8 * Copyright (C) 2007 MontaVista Software Inc.
9 * Copyright (C) 2009 Provigent Ltd.
10 */
11 #include <linux/acpi.h>
12 #include <linux/clk.h>
13 #include <linux/delay.h>
14 #include <linux/device.h>
15 #include <linux/err.h>
16 #include <linux/errno.h>
17 #include <linux/export.h>
18 #include <linux/i2c.h>
19 #include <linux/interrupt.h>
20 #include <linux/io.h>
21 #include <linux/kernel.h>
22 #include <linux/module.h>
23 #include <linux/pm_runtime.h>
24 #include <linux/regmap.h>
25 #include <linux/swab.h>
26 #include <linux/types.h>
27 #include <linux/units.h>
28
29 #include "i2c-designware-core.h"
30
31 static char *abort_sources[] = {
32 [ABRT_7B_ADDR_NOACK] =
33 "slave address not acknowledged (7bit mode)",
34 [ABRT_10ADDR1_NOACK] =
35 "first address byte not acknowledged (10bit mode)",
36 [ABRT_10ADDR2_NOACK] =
37 "second address byte not acknowledged (10bit mode)",
38 [ABRT_TXDATA_NOACK] =
39 "data not acknowledged",
40 [ABRT_GCALL_NOACK] =
41 "no acknowledgement for a general call",
42 [ABRT_GCALL_READ] =
43 "read after general call",
44 [ABRT_SBYTE_ACKDET] =
45 "start byte acknowledged",
46 [ABRT_SBYTE_NORSTRT] =
47 "trying to send start byte when restart is disabled",
48 [ABRT_10B_RD_NORSTRT] =
49 "trying to read when restart is disabled (10bit mode)",
50 [ABRT_MASTER_DIS] =
51 "trying to use disabled adapter",
52 [ARB_LOST] =
53 "lost arbitration",
54 [ABRT_SLAVE_FLUSH_TXFIFO] =
55 "read command so flush old data in the TX FIFO",
56 [ABRT_SLAVE_ARBLOST] =
57 "slave lost the bus while transmitting data to a remote master",
58 [ABRT_SLAVE_RD_INTX] =
59 "incorrect slave-transmitter mode configuration",
60 };
61
dw_reg_read(void * context,unsigned int reg,unsigned int * val)62 static int dw_reg_read(void *context, unsigned int reg, unsigned int *val)
63 {
64 struct dw_i2c_dev *dev = context;
65
66 *val = readl_relaxed(dev->base + reg);
67
68 return 0;
69 }
70
dw_reg_write(void * context,unsigned int reg,unsigned int val)71 static int dw_reg_write(void *context, unsigned int reg, unsigned int val)
72 {
73 struct dw_i2c_dev *dev = context;
74
75 writel_relaxed(val, dev->base + reg);
76
77 return 0;
78 }
79
dw_reg_read_swab(void * context,unsigned int reg,unsigned int * val)80 static int dw_reg_read_swab(void *context, unsigned int reg, unsigned int *val)
81 {
82 struct dw_i2c_dev *dev = context;
83
84 *val = swab32(readl_relaxed(dev->base + reg));
85
86 return 0;
87 }
88
dw_reg_write_swab(void * context,unsigned int reg,unsigned int val)89 static int dw_reg_write_swab(void *context, unsigned int reg, unsigned int val)
90 {
91 struct dw_i2c_dev *dev = context;
92
93 writel_relaxed(swab32(val), dev->base + reg);
94
95 return 0;
96 }
97
dw_reg_read_word(void * context,unsigned int reg,unsigned int * val)98 static int dw_reg_read_word(void *context, unsigned int reg, unsigned int *val)
99 {
100 struct dw_i2c_dev *dev = context;
101
102 *val = readw_relaxed(dev->base + reg) |
103 (readw_relaxed(dev->base + reg + 2) << 16);
104
105 return 0;
106 }
107
dw_reg_write_word(void * context,unsigned int reg,unsigned int val)108 static int dw_reg_write_word(void *context, unsigned int reg, unsigned int val)
109 {
110 struct dw_i2c_dev *dev = context;
111
112 writew_relaxed(val, dev->base + reg);
113 writew_relaxed(val >> 16, dev->base + reg + 2);
114
115 return 0;
116 }
117
118 /**
119 * i2c_dw_init_regmap() - Initialize registers map
120 * @dev: device private data
121 *
122 * Autodetects needed register access mode and creates the regmap with
123 * corresponding read/write callbacks. This must be called before doing any
124 * other register access.
125 */
i2c_dw_init_regmap(struct dw_i2c_dev * dev)126 int i2c_dw_init_regmap(struct dw_i2c_dev *dev)
127 {
128 struct regmap_config map_cfg = {
129 .reg_bits = 32,
130 .val_bits = 32,
131 .reg_stride = 4,
132 .disable_locking = true,
133 .reg_read = dw_reg_read,
134 .reg_write = dw_reg_write,
135 .max_register = DW_IC_COMP_TYPE,
136 };
137 u32 reg;
138 int ret;
139
140 /*
141 * Skip detecting the registers map configuration if the regmap has
142 * already been provided by a higher code.
143 */
144 if (dev->map)
145 return 0;
146
147 ret = i2c_dw_acquire_lock(dev);
148 if (ret)
149 return ret;
150
151 reg = readl(dev->base + DW_IC_COMP_TYPE);
152 i2c_dw_release_lock(dev);
153
154 if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU)
155 map_cfg.max_register = AMD_UCSI_INTR_REG;
156
157 if (reg == swab32(DW_IC_COMP_TYPE_VALUE)) {
158 map_cfg.reg_read = dw_reg_read_swab;
159 map_cfg.reg_write = dw_reg_write_swab;
160 } else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
161 map_cfg.reg_read = dw_reg_read_word;
162 map_cfg.reg_write = dw_reg_write_word;
163 } else if (reg != DW_IC_COMP_TYPE_VALUE) {
164 dev_err(dev->dev,
165 "Unknown Synopsys component type: 0x%08x\n", reg);
166 return -ENODEV;
167 }
168
169 /*
170 * Note we'll check the return value of the regmap IO accessors only
171 * at the probe stage. The rest of the code won't do this because
172 * basically we have MMIO-based regmap so non of the read/write methods
173 * can fail.
174 */
175 dev->map = devm_regmap_init(dev->dev, NULL, dev, &map_cfg);
176 if (IS_ERR(dev->map)) {
177 dev_err(dev->dev, "Failed to init the registers map\n");
178 return PTR_ERR(dev->map);
179 }
180
181 return 0;
182 }
183
184 static const u32 supported_speeds[] = {
185 I2C_MAX_HIGH_SPEED_MODE_FREQ,
186 I2C_MAX_FAST_MODE_PLUS_FREQ,
187 I2C_MAX_FAST_MODE_FREQ,
188 I2C_MAX_STANDARD_MODE_FREQ,
189 };
190
i2c_dw_validate_speed(struct dw_i2c_dev * dev)191 int i2c_dw_validate_speed(struct dw_i2c_dev *dev)
192 {
193 struct i2c_timings *t = &dev->timings;
194 unsigned int i;
195
196 /*
197 * Only standard mode at 100kHz, fast mode at 400kHz,
198 * fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
199 */
200 for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
201 if (t->bus_freq_hz == supported_speeds[i])
202 return 0;
203 }
204
205 dev_err(dev->dev,
206 "%d Hz is unsupported, only 100kHz, 400kHz, 1MHz and 3.4MHz are supported\n",
207 t->bus_freq_hz);
208
209 return -EINVAL;
210 }
211 EXPORT_SYMBOL_GPL(i2c_dw_validate_speed);
212
213 #ifdef CONFIG_ACPI
214
215 #include <linux/dmi.h>
216
217 /*
218 * The HCNT/LCNT information coming from ACPI should be the most accurate
219 * for given platform. However, some systems get it wrong. On such systems
220 * we get better results by calculating those based on the input clock.
221 */
222 static const struct dmi_system_id i2c_dw_no_acpi_params[] = {
223 {
224 .ident = "Dell Inspiron 7348",
225 .matches = {
226 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
227 DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7348"),
228 },
229 },
230 {}
231 };
232
i2c_dw_acpi_params(struct device * device,char method[],u16 * hcnt,u16 * lcnt,u32 * sda_hold)233 static void i2c_dw_acpi_params(struct device *device, char method[],
234 u16 *hcnt, u16 *lcnt, u32 *sda_hold)
235 {
236 struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
237 acpi_handle handle = ACPI_HANDLE(device);
238 union acpi_object *obj;
239
240 if (dmi_check_system(i2c_dw_no_acpi_params))
241 return;
242
243 if (ACPI_FAILURE(acpi_evaluate_object(handle, method, NULL, &buf)))
244 return;
245
246 obj = (union acpi_object *)buf.pointer;
247 if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 3) {
248 const union acpi_object *objs = obj->package.elements;
249
250 *hcnt = (u16)objs[0].integer.value;
251 *lcnt = (u16)objs[1].integer.value;
252 *sda_hold = (u32)objs[2].integer.value;
253 }
254
255 kfree(buf.pointer);
256 }
257
i2c_dw_acpi_configure(struct device * device)258 int i2c_dw_acpi_configure(struct device *device)
259 {
260 struct dw_i2c_dev *dev = dev_get_drvdata(device);
261 struct i2c_timings *t = &dev->timings;
262 u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
263
264 /*
265 * Try to get SDA hold time and *CNT values from an ACPI method for
266 * selected speed modes.
267 */
268 i2c_dw_acpi_params(device, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, &ss_ht);
269 i2c_dw_acpi_params(device, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
270 i2c_dw_acpi_params(device, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt, &fp_ht);
271 i2c_dw_acpi_params(device, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, &hs_ht);
272
273 switch (t->bus_freq_hz) {
274 case I2C_MAX_STANDARD_MODE_FREQ:
275 dev->sda_hold_time = ss_ht;
276 break;
277 case I2C_MAX_FAST_MODE_PLUS_FREQ:
278 dev->sda_hold_time = fp_ht;
279 break;
280 case I2C_MAX_HIGH_SPEED_MODE_FREQ:
281 dev->sda_hold_time = hs_ht;
282 break;
283 case I2C_MAX_FAST_MODE_FREQ:
284 default:
285 dev->sda_hold_time = fs_ht;
286 break;
287 }
288
289 return 0;
290 }
291 EXPORT_SYMBOL_GPL(i2c_dw_acpi_configure);
292
i2c_dw_acpi_round_bus_speed(struct device * device)293 static u32 i2c_dw_acpi_round_bus_speed(struct device *device)
294 {
295 u32 acpi_speed;
296 int i;
297
298 acpi_speed = i2c_acpi_find_bus_speed(device);
299 /*
300 * Some DSTDs use a non standard speed, round down to the lowest
301 * standard speed.
302 */
303 for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
304 if (acpi_speed >= supported_speeds[i])
305 return supported_speeds[i];
306 }
307
308 return 0;
309 }
310
311 #else /* CONFIG_ACPI */
312
i2c_dw_acpi_round_bus_speed(struct device * device)313 static inline u32 i2c_dw_acpi_round_bus_speed(struct device *device) { return 0; }
314
315 #endif /* CONFIG_ACPI */
316
i2c_dw_adjust_bus_speed(struct dw_i2c_dev * dev)317 void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)
318 {
319 u32 acpi_speed = i2c_dw_acpi_round_bus_speed(dev->dev);
320 struct i2c_timings *t = &dev->timings;
321
322 /*
323 * Find bus speed from the "clock-frequency" device property, ACPI
324 * or by using fast mode if neither is set.
325 */
326 if (acpi_speed && t->bus_freq_hz)
327 t->bus_freq_hz = min(t->bus_freq_hz, acpi_speed);
328 else if (acpi_speed || t->bus_freq_hz)
329 t->bus_freq_hz = max(t->bus_freq_hz, acpi_speed);
330 else
331 t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
332 }
333 EXPORT_SYMBOL_GPL(i2c_dw_adjust_bus_speed);
334
i2c_dw_scl_hcnt(u32 ic_clk,u32 tSYMBOL,u32 tf,int cond,int offset)335 u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
336 {
337 /*
338 * DesignWare I2C core doesn't seem to have solid strategy to meet
339 * the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec
340 * will result in violation of the tHD;STA spec.
341 */
342 if (cond)
343 /*
344 * Conditional expression:
345 *
346 * IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH
347 *
348 * This is based on the DW manuals, and represents an ideal
349 * configuration. The resulting I2C bus speed will be
350 * faster than any of the others.
351 *
352 * If your hardware is free from tHD;STA issue, try this one.
353 */
354 return DIV_ROUND_CLOSEST(ic_clk * tSYMBOL, MICRO) - 8 + offset;
355 else
356 /*
357 * Conditional expression:
358 *
359 * IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf)
360 *
361 * This is just experimental rule; the tHD;STA period turned
362 * out to be proportinal to (_HCNT + 3). With this setting,
363 * we could meet both tHIGH and tHD;STA timing specs.
364 *
365 * If unsure, you'd better to take this alternative.
366 *
367 * The reason why we need to take into account "tf" here,
368 * is the same as described in i2c_dw_scl_lcnt().
369 */
370 return DIV_ROUND_CLOSEST(ic_clk * (tSYMBOL + tf), MICRO) - 3 + offset;
371 }
372
i2c_dw_scl_lcnt(u32 ic_clk,u32 tLOW,u32 tf,int offset)373 u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
374 {
375 /*
376 * Conditional expression:
377 *
378 * IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf)
379 *
380 * DW I2C core starts counting the SCL CNTs for the LOW period
381 * of the SCL clock (tLOW) as soon as it pulls the SCL line.
382 * In order to meet the tLOW timing spec, we need to take into
383 * account the fall time of SCL signal (tf). Default tf value
384 * should be 0.3 us, for safety.
385 */
386 return DIV_ROUND_CLOSEST(ic_clk * (tLOW + tf), MICRO) - 1 + offset;
387 }
388
i2c_dw_set_sda_hold(struct dw_i2c_dev * dev)389 int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev)
390 {
391 u32 reg;
392 int ret;
393
394 ret = i2c_dw_acquire_lock(dev);
395 if (ret)
396 return ret;
397
398 /* Configure SDA Hold Time if required */
399 ret = regmap_read(dev->map, DW_IC_COMP_VERSION, ®);
400 if (ret)
401 goto err_release_lock;
402
403 if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
404 if (!dev->sda_hold_time) {
405 /* Keep previous hold time setting if no one set it */
406 ret = regmap_read(dev->map, DW_IC_SDA_HOLD,
407 &dev->sda_hold_time);
408 if (ret)
409 goto err_release_lock;
410 }
411
412 /*
413 * Workaround for avoiding TX arbitration lost in case I2C
414 * slave pulls SDA down "too quickly" after falling edge of
415 * SCL by enabling non-zero SDA RX hold. Specification says it
416 * extends incoming SDA low to high transition while SCL is
417 * high but it appears to help also above issue.
418 */
419 if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
420 dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
421
422 dev_dbg(dev->dev, "SDA Hold Time TX:RX = %d:%d\n",
423 dev->sda_hold_time & ~(u32)DW_IC_SDA_HOLD_RX_MASK,
424 dev->sda_hold_time >> DW_IC_SDA_HOLD_RX_SHIFT);
425 } else if (dev->set_sda_hold_time) {
426 dev->set_sda_hold_time(dev);
427 } else if (dev->sda_hold_time) {
428 dev_warn(dev->dev,
429 "Hardware too old to adjust SDA hold time.\n");
430 dev->sda_hold_time = 0;
431 }
432
433 err_release_lock:
434 i2c_dw_release_lock(dev);
435
436 return ret;
437 }
438
__i2c_dw_disable(struct dw_i2c_dev * dev)439 void __i2c_dw_disable(struct dw_i2c_dev *dev)
440 {
441 int timeout = 100;
442 u32 status;
443
444 do {
445 __i2c_dw_disable_nowait(dev);
446 /*
447 * The enable status register may be unimplemented, but
448 * in that case this test reads zero and exits the loop.
449 */
450 regmap_read(dev->map, DW_IC_ENABLE_STATUS, &status);
451 if ((status & 1) == 0)
452 return;
453
454 /*
455 * Wait 10 times the signaling period of the highest I2C
456 * transfer supported by the driver (for 400KHz this is
457 * 25us) as described in the DesignWare I2C databook.
458 */
459 usleep_range(25, 250);
460 } while (timeout--);
461
462 dev_warn(dev->dev, "timeout in disabling adapter\n");
463 }
464
i2c_dw_clk_rate(struct dw_i2c_dev * dev)465 unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
466 {
467 /*
468 * Clock is not necessary if we got LCNT/HCNT values directly from
469 * the platform code.
470 */
471 if (WARN_ON_ONCE(!dev->get_clk_rate_khz))
472 return 0;
473 return dev->get_clk_rate_khz(dev);
474 }
475
i2c_dw_prepare_clk(struct dw_i2c_dev * dev,bool prepare)476 int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare)
477 {
478 int ret;
479
480 if (prepare) {
481 /* Optional interface clock */
482 ret = clk_prepare_enable(dev->pclk);
483 if (ret)
484 return ret;
485
486 ret = clk_prepare_enable(dev->clk);
487 if (ret)
488 clk_disable_unprepare(dev->pclk);
489
490 return ret;
491 }
492
493 clk_disable_unprepare(dev->clk);
494 clk_disable_unprepare(dev->pclk);
495
496 return 0;
497 }
498 EXPORT_SYMBOL_GPL(i2c_dw_prepare_clk);
499
i2c_dw_acquire_lock(struct dw_i2c_dev * dev)500 int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
501 {
502 int ret;
503
504 if (!dev->acquire_lock)
505 return 0;
506
507 ret = dev->acquire_lock();
508 if (!ret)
509 return 0;
510
511 dev_err(dev->dev, "couldn't acquire bus ownership\n");
512
513 return ret;
514 }
515
i2c_dw_release_lock(struct dw_i2c_dev * dev)516 void i2c_dw_release_lock(struct dw_i2c_dev *dev)
517 {
518 if (dev->release_lock)
519 dev->release_lock();
520 }
521
522 /*
523 * Waiting for bus not busy
524 */
i2c_dw_wait_bus_not_busy(struct dw_i2c_dev * dev)525 int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
526 {
527 u32 status;
528 int ret;
529
530 ret = regmap_read_poll_timeout(dev->map, DW_IC_STATUS, status,
531 !(status & DW_IC_STATUS_ACTIVITY),
532 1100, 20000);
533 if (ret) {
534 dev_warn(dev->dev, "timeout waiting for bus ready\n");
535
536 i2c_recover_bus(&dev->adapter);
537
538 regmap_read(dev->map, DW_IC_STATUS, &status);
539 if (!(status & DW_IC_STATUS_ACTIVITY))
540 ret = 0;
541 }
542
543 return ret;
544 }
545
i2c_dw_handle_tx_abort(struct dw_i2c_dev * dev)546 int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
547 {
548 unsigned long abort_source = dev->abort_source;
549 int i;
550
551 if (abort_source & DW_IC_TX_ABRT_NOACK) {
552 for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
553 dev_dbg(dev->dev,
554 "%s: %s\n", __func__, abort_sources[i]);
555 return -EREMOTEIO;
556 }
557
558 for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
559 dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
560
561 if (abort_source & DW_IC_TX_ARB_LOST)
562 return -EAGAIN;
563 else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
564 return -EINVAL; /* wrong msgs[] data */
565 else
566 return -EIO;
567 }
568
i2c_dw_set_fifo_size(struct dw_i2c_dev * dev)569 int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev)
570 {
571 u32 param, tx_fifo_depth, rx_fifo_depth;
572 int ret;
573
574 /*
575 * Try to detect the FIFO depth if not set by interface driver,
576 * the depth could be from 2 to 256 from HW spec.
577 */
578 ret = i2c_dw_acquire_lock(dev);
579 if (ret)
580 return ret;
581
582 ret = regmap_read(dev->map, DW_IC_COMP_PARAM_1, ¶m);
583 i2c_dw_release_lock(dev);
584 if (ret)
585 return ret;
586
587 tx_fifo_depth = ((param >> 16) & 0xff) + 1;
588 rx_fifo_depth = ((param >> 8) & 0xff) + 1;
589 if (!dev->tx_fifo_depth) {
590 dev->tx_fifo_depth = tx_fifo_depth;
591 dev->rx_fifo_depth = rx_fifo_depth;
592 } else if (tx_fifo_depth >= 2) {
593 dev->tx_fifo_depth = min_t(u32, dev->tx_fifo_depth,
594 tx_fifo_depth);
595 dev->rx_fifo_depth = min_t(u32, dev->rx_fifo_depth,
596 rx_fifo_depth);
597 }
598
599 return 0;
600 }
601
i2c_dw_func(struct i2c_adapter * adap)602 u32 i2c_dw_func(struct i2c_adapter *adap)
603 {
604 struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
605
606 return dev->functionality;
607 }
608
i2c_dw_disable(struct dw_i2c_dev * dev)609 void i2c_dw_disable(struct dw_i2c_dev *dev)
610 {
611 u32 dummy;
612 int ret;
613
614 ret = i2c_dw_acquire_lock(dev);
615 if (ret)
616 return;
617
618 /* Disable controller */
619 __i2c_dw_disable(dev);
620
621 /* Disable all interrupts */
622 regmap_write(dev->map, DW_IC_INTR_MASK, 0);
623 regmap_read(dev->map, DW_IC_CLR_INTR, &dummy);
624
625 i2c_dw_release_lock(dev);
626 }
627
i2c_dw_disable_int(struct dw_i2c_dev * dev)628 void i2c_dw_disable_int(struct dw_i2c_dev *dev)
629 {
630 regmap_write(dev->map, DW_IC_INTR_MASK, 0);
631 }
632
633 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core");
634 MODULE_LICENSE("GPL");
635