1 /*
2 * Intel Wireless WiMAX Connection 2400m
3 * Firmware uploader's USB specifics
4 *
5 *
6 * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 *
12 * * Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * * Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in
16 * the documentation and/or other materials provided with the
17 * distribution.
18 * * Neither the name of Intel Corporation nor the names of its
19 * contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
25 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
26 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
27 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
28 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
29 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
30 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
32 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 *
34 *
35 * Intel Corporation <linux-wimax@intel.com>
36 * Yanir Lubetkin <yanirx.lubetkin@intel.com>
37 * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
38 * - Initial implementation
39 *
40 * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
41 * - bus generic/specific split
42 *
43 * THE PROCEDURE
44 *
45 * See fw.c for the generic description of this procedure.
46 *
47 * This file implements only the USB specifics. It boils down to how
48 * to send a command and waiting for an acknowledgement from the
49 * device.
50 *
51 * This code (and process) is single threaded. It assumes it is the
52 * only thread poking around (guaranteed by fw.c).
53 *
54 * COMMAND EXECUTION
55 *
56 * A write URB is posted with the buffer to the bulk output endpoint.
57 *
58 * ACK RECEPTION
59 *
60 * We just post a URB to the notification endpoint and wait for
61 * data. We repeat until we get all the data we expect (as indicated
62 * by the call from the bus generic code).
63 *
64 * The data is not read from the bulk in endpoint for boot mode.
65 *
66 * ROADMAP
67 *
68 * i2400mu_bus_bm_cmd_send
69 * i2400m_bm_cmd_prepare...
70 * i2400mu_tx_bulk_out
71 *
72 * i2400mu_bus_bm_wait_for_ack
73 * i2400m_notif_submit
74 */
75 #include <linux/usb.h>
76 #include <linux/gfp.h>
77 #include "i2400m-usb.h"
78
79
80 #define D_SUBMODULE fw
81 #include "usb-debug-levels.h"
82
83
84 /*
85 * Synchronous write to the device
86 *
87 * Takes care of updating EDC counts and thus, handle device errors.
88 */
89 static
i2400mu_tx_bulk_out(struct i2400mu * i2400mu,void * buf,size_t buf_size)90 ssize_t i2400mu_tx_bulk_out(struct i2400mu *i2400mu, void *buf, size_t buf_size)
91 {
92 int result;
93 struct device *dev = &i2400mu->usb_iface->dev;
94 int len;
95 struct usb_endpoint_descriptor *epd;
96 int pipe, do_autopm = 1;
97
98 result = usb_autopm_get_interface(i2400mu->usb_iface);
99 if (result < 0) {
100 dev_err(dev, "BM-CMD: can't get autopm: %d\n", result);
101 do_autopm = 0;
102 }
103 epd = usb_get_epd(i2400mu->usb_iface, i2400mu->endpoint_cfg.bulk_out);
104 pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress);
105 retry:
106 result = usb_bulk_msg(i2400mu->usb_dev, pipe, buf, buf_size, &len, 200);
107 switch (result) {
108 case 0:
109 if (len != buf_size) {
110 dev_err(dev, "BM-CMD: short write (%u B vs %zu "
111 "expected)\n", len, buf_size);
112 result = -EIO;
113 break;
114 }
115 result = len;
116 break;
117 case -EPIPE:
118 /*
119 * Stall -- maybe the device is choking with our
120 * requests. Clear it and give it some time. If they
121 * happen to often, it might be another symptom, so we
122 * reset.
123 *
124 * No error handling for usb_clear_halt(0; if it
125 * works, the retry works; if it fails, this switch
126 * does the error handling for us.
127 */
128 if (edc_inc(&i2400mu->urb_edc,
129 10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
130 dev_err(dev, "BM-CMD: too many stalls in "
131 "URB; resetting device\n");
132 usb_queue_reset_device(i2400mu->usb_iface);
133 /* fallthrough */
134 } else {
135 usb_clear_halt(i2400mu->usb_dev, pipe);
136 msleep(10); /* give the device some time */
137 goto retry;
138 }
139 case -EINVAL: /* while removing driver */
140 case -ENODEV: /* dev disconnect ... */
141 case -ENOENT: /* just ignore it */
142 case -ESHUTDOWN: /* and exit */
143 case -ECONNRESET:
144 result = -ESHUTDOWN;
145 break;
146 case -ETIMEDOUT: /* bah... */
147 break;
148 default: /* any other? */
149 if (edc_inc(&i2400mu->urb_edc,
150 EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
151 dev_err(dev, "BM-CMD: maximum errors in "
152 "URB exceeded; resetting device\n");
153 usb_queue_reset_device(i2400mu->usb_iface);
154 result = -ENODEV;
155 break;
156 }
157 dev_err(dev, "BM-CMD: URB error %d, retrying\n",
158 result);
159 goto retry;
160 }
161 if (do_autopm)
162 usb_autopm_put_interface(i2400mu->usb_iface);
163 return result;
164 }
165
166
167 /*
168 * Send a boot-mode command over the bulk-out pipe
169 *
170 * Command can be a raw command, which requires no preparation (and
171 * which might not even be following the command format). Checks that
172 * the right amount of data was transferred.
173 *
174 * To satisfy USB requirements (no onstack, vmalloc or in data segment
175 * buffers), we copy the command to i2400m->bm_cmd_buf and send it from
176 * there.
177 *
178 * @flags: pass thru from i2400m_bm_cmd()
179 * @return: cmd_size if ok, < 0 errno code on error.
180 */
i2400mu_bus_bm_cmd_send(struct i2400m * i2400m,const struct i2400m_bootrom_header * _cmd,size_t cmd_size,int flags)181 ssize_t i2400mu_bus_bm_cmd_send(struct i2400m *i2400m,
182 const struct i2400m_bootrom_header *_cmd,
183 size_t cmd_size, int flags)
184 {
185 ssize_t result;
186 struct device *dev = i2400m_dev(i2400m);
187 struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m);
188 int opcode = _cmd == NULL ? -1 : i2400m_brh_get_opcode(_cmd);
189 struct i2400m_bootrom_header *cmd;
190 size_t cmd_size_a = ALIGN(cmd_size, 16); /* USB restriction */
191
192 d_fnstart(8, dev, "(i2400m %p cmd %p size %zu)\n",
193 i2400m, _cmd, cmd_size);
194 result = -E2BIG;
195 if (cmd_size > I2400M_BM_CMD_BUF_SIZE)
196 goto error_too_big;
197 if (_cmd != i2400m->bm_cmd_buf)
198 memmove(i2400m->bm_cmd_buf, _cmd, cmd_size);
199 cmd = i2400m->bm_cmd_buf;
200 if (cmd_size_a > cmd_size) /* Zero pad space */
201 memset(i2400m->bm_cmd_buf + cmd_size, 0, cmd_size_a - cmd_size);
202 if ((flags & I2400M_BM_CMD_RAW) == 0) {
203 if (WARN_ON(i2400m_brh_get_response_required(cmd) == 0))
204 dev_warn(dev, "SW BUG: response_required == 0\n");
205 i2400m_bm_cmd_prepare(cmd);
206 }
207 result = i2400mu_tx_bulk_out(i2400mu, i2400m->bm_cmd_buf, cmd_size);
208 if (result < 0) {
209 dev_err(dev, "boot-mode cmd %d: cannot send: %zd\n",
210 opcode, result);
211 goto error_cmd_send;
212 }
213 if (result != cmd_size) { /* all was transferred? */
214 dev_err(dev, "boot-mode cmd %d: incomplete transfer "
215 "(%zu vs %zu submitted)\n", opcode, result, cmd_size);
216 result = -EIO;
217 goto error_cmd_size;
218 }
219 error_cmd_size:
220 error_cmd_send:
221 error_too_big:
222 d_fnend(8, dev, "(i2400m %p cmd %p size %zu) = %zd\n",
223 i2400m, _cmd, cmd_size, result);
224 return result;
225 }
226
227
228 static
__i2400mu_bm_notif_cb(struct urb * urb)229 void __i2400mu_bm_notif_cb(struct urb *urb)
230 {
231 complete(urb->context);
232 }
233
234
235 /*
236 * submit a read to the notification endpoint
237 *
238 * @i2400m: device descriptor
239 * @urb: urb to use
240 * @completion: completion varible to complete when done
241 *
242 * Data is always read to i2400m->bm_ack_buf
243 */
244 static
i2400mu_notif_submit(struct i2400mu * i2400mu,struct urb * urb,struct completion * completion)245 int i2400mu_notif_submit(struct i2400mu *i2400mu, struct urb *urb,
246 struct completion *completion)
247 {
248 struct i2400m *i2400m = &i2400mu->i2400m;
249 struct usb_endpoint_descriptor *epd;
250 int pipe;
251
252 epd = usb_get_epd(i2400mu->usb_iface,
253 i2400mu->endpoint_cfg.notification);
254 pipe = usb_rcvintpipe(i2400mu->usb_dev, epd->bEndpointAddress);
255 usb_fill_int_urb(urb, i2400mu->usb_dev, pipe,
256 i2400m->bm_ack_buf, I2400M_BM_ACK_BUF_SIZE,
257 __i2400mu_bm_notif_cb, completion,
258 epd->bInterval);
259 return usb_submit_urb(urb, GFP_KERNEL);
260 }
261
262
263 /*
264 * Read an ack from the notification endpoint
265 *
266 * @i2400m:
267 * @_ack: pointer to where to store the read data
268 * @ack_size: how many bytes we should read
269 *
270 * Returns: < 0 errno code on error; otherwise, amount of received bytes.
271 *
272 * Submits a notification read, appends the read data to the given ack
273 * buffer and then repeats (until @ack_size bytes have been
274 * received).
275 */
i2400mu_bus_bm_wait_for_ack(struct i2400m * i2400m,struct i2400m_bootrom_header * _ack,size_t ack_size)276 ssize_t i2400mu_bus_bm_wait_for_ack(struct i2400m *i2400m,
277 struct i2400m_bootrom_header *_ack,
278 size_t ack_size)
279 {
280 ssize_t result = -ENOMEM;
281 struct device *dev = i2400m_dev(i2400m);
282 struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m);
283 struct urb notif_urb;
284 void *ack = _ack;
285 size_t offset, len;
286 long val;
287 int do_autopm = 1;
288 DECLARE_COMPLETION_ONSTACK(notif_completion);
289
290 d_fnstart(8, dev, "(i2400m %p ack %p size %zu)\n",
291 i2400m, ack, ack_size);
292 BUG_ON(_ack == i2400m->bm_ack_buf);
293 result = usb_autopm_get_interface(i2400mu->usb_iface);
294 if (result < 0) {
295 dev_err(dev, "BM-ACK: can't get autopm: %d\n", (int) result);
296 do_autopm = 0;
297 }
298 usb_init_urb(¬if_urb); /* ready notifications */
299 usb_get_urb(¬if_urb);
300 offset = 0;
301 while (offset < ack_size) {
302 init_completion(¬if_completion);
303 result = i2400mu_notif_submit(i2400mu, ¬if_urb,
304 ¬if_completion);
305 if (result < 0)
306 goto error_notif_urb_submit;
307 val = wait_for_completion_interruptible_timeout(
308 ¬if_completion, HZ);
309 if (val == 0) {
310 result = -ETIMEDOUT;
311 usb_kill_urb(¬if_urb); /* Timedout */
312 goto error_notif_wait;
313 }
314 if (val == -ERESTARTSYS) {
315 result = -EINTR; /* Interrupted */
316 usb_kill_urb(¬if_urb);
317 goto error_notif_wait;
318 }
319 result = notif_urb.status; /* How was the ack? */
320 switch (result) {
321 case 0:
322 break;
323 case -EINVAL: /* while removing driver */
324 case -ENODEV: /* dev disconnect ... */
325 case -ENOENT: /* just ignore it */
326 case -ESHUTDOWN: /* and exit */
327 case -ECONNRESET:
328 result = -ESHUTDOWN;
329 goto error_dev_gone;
330 default: /* any other? */
331 usb_kill_urb(¬if_urb); /* Timedout */
332 if (edc_inc(&i2400mu->urb_edc,
333 EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME))
334 goto error_exceeded;
335 dev_err(dev, "BM-ACK: URB error %d, "
336 "retrying\n", notif_urb.status);
337 continue; /* retry */
338 }
339 if (notif_urb.actual_length == 0) {
340 d_printf(6, dev, "ZLP received, retrying\n");
341 continue;
342 }
343 /* Got data, append it to the buffer */
344 len = min(ack_size - offset, (size_t) notif_urb.actual_length);
345 memcpy(ack + offset, i2400m->bm_ack_buf, len);
346 offset += len;
347 }
348 result = offset;
349 error_notif_urb_submit:
350 error_notif_wait:
351 error_dev_gone:
352 out:
353 if (do_autopm)
354 usb_autopm_put_interface(i2400mu->usb_iface);
355 d_fnend(8, dev, "(i2400m %p ack %p size %zu) = %ld\n",
356 i2400m, ack, ack_size, (long) result);
357 return result;
358
359 error_exceeded:
360 dev_err(dev, "bm: maximum errors in notification URB exceeded; "
361 "resetting device\n");
362 usb_queue_reset_device(i2400mu->usb_iface);
363 goto out;
364 }
365