1 /* SPDX-License-Identifier: ISC */
2 /*
3  * Copyright (c) 2005-2011 Atheros Communications Inc.
4  * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
5  * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
6  */
7 
8 #ifndef _WMI_H_
9 #define _WMI_H_
10 
11 #include <linux/types.h>
12 #include <linux/ieee80211.h>
13 
14 /*
15  * This file specifies the WMI interface for the Unified Software
16  * Architecture.
17  *
18  * It includes definitions of all the commands and events. Commands are
19  * messages from the host to the target. Events and Replies are messages
20  * from the target to the host.
21  *
22  * Ownership of correctness in regards to WMI commands belongs to the host
23  * driver and the target is not required to validate parameters for value,
24  * proper range, or any other checking.
25  *
26  * Guidelines for extending this interface are below.
27  *
28  * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
29  *
30  * 2. Use ONLY u32 type for defining member variables within WMI
31  *    command/event structures. Do not use u8, u16, bool or
32  *    enum types within these structures.
33  *
34  * 3. DO NOT define bit fields within structures. Implement bit fields
35  *    using masks if necessary. Do not use the programming language's bit
36  *    field definition.
37  *
38  * 4. Define macros for encode/decode of u8, u16 fields within
39  *    the u32 variables. Use these macros for set/get of these fields.
40  *    Try to use this to optimize the structure without bloating it with
41  *    u32 variables for every lower sized field.
42  *
43  * 5. Do not use PACK/UNPACK attributes for the structures as each member
44  *    variable is already 4-byte aligned by virtue of being a u32
45  *    type.
46  *
47  * 6. Comment each parameter part of the WMI command/event structure by
48  *    using the 2 stars at the beginning of C comment instead of one star to
49  *    enable HTML document generation using Doxygen.
50  *
51  */
52 
53 /* Control Path */
54 struct wmi_cmd_hdr {
55 	__le32 cmd_id;
56 } __packed;
57 
58 #define WMI_CMD_HDR_CMD_ID_MASK   0x00FFFFFF
59 #define WMI_CMD_HDR_CMD_ID_LSB    0
60 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
61 #define WMI_CMD_HDR_PLT_PRIV_LSB  24
62 
63 #define HTC_PROTOCOL_VERSION    0x0002
64 #define WMI_PROTOCOL_VERSION    0x0002
65 
66 /*
67  * There is no signed version of __le32, so for a temporary solution come
68  * up with our own version. The idea is from fs/ntfs/endian.h.
69  *
70  * Use a_ prefix so that it doesn't conflict if we get proper support to
71  * linux/types.h.
72  */
73 typedef __s32 __bitwise a_sle32;
74 
a_cpu_to_sle32(s32 val)75 static inline a_sle32 a_cpu_to_sle32(s32 val)
76 {
77 	return (__force a_sle32)cpu_to_le32(val);
78 }
79 
a_sle32_to_cpu(a_sle32 val)80 static inline s32 a_sle32_to_cpu(a_sle32 val)
81 {
82 	return le32_to_cpu((__force __le32)val);
83 }
84 
85 enum wmi_service {
86 	WMI_SERVICE_BEACON_OFFLOAD = 0,
87 	WMI_SERVICE_SCAN_OFFLOAD,
88 	WMI_SERVICE_ROAM_OFFLOAD,
89 	WMI_SERVICE_BCN_MISS_OFFLOAD,
90 	WMI_SERVICE_STA_PWRSAVE,
91 	WMI_SERVICE_STA_ADVANCED_PWRSAVE,
92 	WMI_SERVICE_AP_UAPSD,
93 	WMI_SERVICE_AP_DFS,
94 	WMI_SERVICE_11AC,
95 	WMI_SERVICE_BLOCKACK,
96 	WMI_SERVICE_PHYERR,
97 	WMI_SERVICE_BCN_FILTER,
98 	WMI_SERVICE_RTT,
99 	WMI_SERVICE_RATECTRL,
100 	WMI_SERVICE_WOW,
101 	WMI_SERVICE_RATECTRL_CACHE,
102 	WMI_SERVICE_IRAM_TIDS,
103 	WMI_SERVICE_ARPNS_OFFLOAD,
104 	WMI_SERVICE_NLO,
105 	WMI_SERVICE_GTK_OFFLOAD,
106 	WMI_SERVICE_SCAN_SCH,
107 	WMI_SERVICE_CSA_OFFLOAD,
108 	WMI_SERVICE_CHATTER,
109 	WMI_SERVICE_COEX_FREQAVOID,
110 	WMI_SERVICE_PACKET_POWER_SAVE,
111 	WMI_SERVICE_FORCE_FW_HANG,
112 	WMI_SERVICE_GPIO,
113 	WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
114 	WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
115 	WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
116 	WMI_SERVICE_STA_KEEP_ALIVE,
117 	WMI_SERVICE_TX_ENCAP,
118 	WMI_SERVICE_BURST,
119 	WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
120 	WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
121 	WMI_SERVICE_ROAM_SCAN_OFFLOAD,
122 	WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
123 	WMI_SERVICE_EARLY_RX,
124 	WMI_SERVICE_STA_SMPS,
125 	WMI_SERVICE_FWTEST,
126 	WMI_SERVICE_STA_WMMAC,
127 	WMI_SERVICE_TDLS,
128 	WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
129 	WMI_SERVICE_ADAPTIVE_OCS,
130 	WMI_SERVICE_BA_SSN_SUPPORT,
131 	WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
132 	WMI_SERVICE_WLAN_HB,
133 	WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
134 	WMI_SERVICE_BATCH_SCAN,
135 	WMI_SERVICE_QPOWER,
136 	WMI_SERVICE_PLMREQ,
137 	WMI_SERVICE_THERMAL_MGMT,
138 	WMI_SERVICE_RMC,
139 	WMI_SERVICE_MHF_OFFLOAD,
140 	WMI_SERVICE_COEX_SAR,
141 	WMI_SERVICE_BCN_TXRATE_OVERRIDE,
142 	WMI_SERVICE_NAN,
143 	WMI_SERVICE_L1SS_STAT,
144 	WMI_SERVICE_ESTIMATE_LINKSPEED,
145 	WMI_SERVICE_OBSS_SCAN,
146 	WMI_SERVICE_TDLS_OFFCHAN,
147 	WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
148 	WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
149 	WMI_SERVICE_IBSS_PWRSAVE,
150 	WMI_SERVICE_LPASS,
151 	WMI_SERVICE_EXTSCAN,
152 	WMI_SERVICE_D0WOW,
153 	WMI_SERVICE_HSOFFLOAD,
154 	WMI_SERVICE_ROAM_HO_OFFLOAD,
155 	WMI_SERVICE_RX_FULL_REORDER,
156 	WMI_SERVICE_DHCP_OFFLOAD,
157 	WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
158 	WMI_SERVICE_MDNS_OFFLOAD,
159 	WMI_SERVICE_SAP_AUTH_OFFLOAD,
160 	WMI_SERVICE_ATF,
161 	WMI_SERVICE_COEX_GPIO,
162 	WMI_SERVICE_ENHANCED_PROXY_STA,
163 	WMI_SERVICE_TT,
164 	WMI_SERVICE_PEER_CACHING,
165 	WMI_SERVICE_AUX_SPECTRAL_INTF,
166 	WMI_SERVICE_AUX_CHAN_LOAD_INTF,
167 	WMI_SERVICE_BSS_CHANNEL_INFO_64,
168 	WMI_SERVICE_EXT_RES_CFG_SUPPORT,
169 	WMI_SERVICE_MESH_11S,
170 	WMI_SERVICE_MESH_NON_11S,
171 	WMI_SERVICE_PEER_STATS,
172 	WMI_SERVICE_RESTRT_CHNL_SUPPORT,
173 	WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
174 	WMI_SERVICE_TX_MODE_PUSH_ONLY,
175 	WMI_SERVICE_TX_MODE_PUSH_PULL,
176 	WMI_SERVICE_TX_MODE_DYNAMIC,
177 	WMI_SERVICE_VDEV_RX_FILTER,
178 	WMI_SERVICE_BTCOEX,
179 	WMI_SERVICE_CHECK_CAL_VERSION,
180 	WMI_SERVICE_DBGLOG_WARN2,
181 	WMI_SERVICE_BTCOEX_DUTY_CYCLE,
182 	WMI_SERVICE_4_WIRE_COEX_SUPPORT,
183 	WMI_SERVICE_EXTENDED_NSS_SUPPORT,
184 	WMI_SERVICE_PROG_GPIO_BAND_SELECT,
185 	WMI_SERVICE_SMART_LOGGING_SUPPORT,
186 	WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
187 	WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
188 	WMI_SERVICE_MGMT_TX_WMI,
189 	WMI_SERVICE_TDLS_WIDER_BANDWIDTH,
190 	WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
191 	WMI_SERVICE_HOST_DFS_CHECK_SUPPORT,
192 	WMI_SERVICE_TPC_STATS_FINAL,
193 	WMI_SERVICE_RESET_CHIP,
194 	WMI_SERVICE_SPOOF_MAC_SUPPORT,
195 	WMI_SERVICE_TX_DATA_ACK_RSSI,
196 	WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
197 	WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
198 	WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT,
199 	WMI_SERVICE_THERM_THROT,
200 	WMI_SERVICE_RTT_RESPONDER_ROLE,
201 	WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
202 	WMI_SERVICE_REPORT_AIRTIME,
203 	WMI_SERVICE_SYNC_DELETE_CMDS,
204 	WMI_SERVICE_TX_PWR_PER_PEER,
205 	WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
206 	WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
207 	WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
208 
209 	/* Remember to add the new value to wmi_service_name()! */
210 
211 	/* keep last */
212 	WMI_SERVICE_MAX,
213 };
214 
215 enum wmi_10x_service {
216 	WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
217 	WMI_10X_SERVICE_SCAN_OFFLOAD,
218 	WMI_10X_SERVICE_ROAM_OFFLOAD,
219 	WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
220 	WMI_10X_SERVICE_STA_PWRSAVE,
221 	WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
222 	WMI_10X_SERVICE_AP_UAPSD,
223 	WMI_10X_SERVICE_AP_DFS,
224 	WMI_10X_SERVICE_11AC,
225 	WMI_10X_SERVICE_BLOCKACK,
226 	WMI_10X_SERVICE_PHYERR,
227 	WMI_10X_SERVICE_BCN_FILTER,
228 	WMI_10X_SERVICE_RTT,
229 	WMI_10X_SERVICE_RATECTRL,
230 	WMI_10X_SERVICE_WOW,
231 	WMI_10X_SERVICE_RATECTRL_CACHE,
232 	WMI_10X_SERVICE_IRAM_TIDS,
233 	WMI_10X_SERVICE_BURST,
234 
235 	/* introduced in 10.2 */
236 	WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
237 	WMI_10X_SERVICE_FORCE_FW_HANG,
238 	WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
239 	WMI_10X_SERVICE_ATF,
240 	WMI_10X_SERVICE_COEX_GPIO,
241 	WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
242 	WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
243 	WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
244 	WMI_10X_SERVICE_MESH,
245 	WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
246 	WMI_10X_SERVICE_PEER_STATS,
247 	WMI_10X_SERVICE_RESET_CHIP,
248 	WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
249 	WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL,
250 	WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
251 	WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
252 };
253 
254 enum wmi_main_service {
255 	WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
256 	WMI_MAIN_SERVICE_SCAN_OFFLOAD,
257 	WMI_MAIN_SERVICE_ROAM_OFFLOAD,
258 	WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
259 	WMI_MAIN_SERVICE_STA_PWRSAVE,
260 	WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
261 	WMI_MAIN_SERVICE_AP_UAPSD,
262 	WMI_MAIN_SERVICE_AP_DFS,
263 	WMI_MAIN_SERVICE_11AC,
264 	WMI_MAIN_SERVICE_BLOCKACK,
265 	WMI_MAIN_SERVICE_PHYERR,
266 	WMI_MAIN_SERVICE_BCN_FILTER,
267 	WMI_MAIN_SERVICE_RTT,
268 	WMI_MAIN_SERVICE_RATECTRL,
269 	WMI_MAIN_SERVICE_WOW,
270 	WMI_MAIN_SERVICE_RATECTRL_CACHE,
271 	WMI_MAIN_SERVICE_IRAM_TIDS,
272 	WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
273 	WMI_MAIN_SERVICE_NLO,
274 	WMI_MAIN_SERVICE_GTK_OFFLOAD,
275 	WMI_MAIN_SERVICE_SCAN_SCH,
276 	WMI_MAIN_SERVICE_CSA_OFFLOAD,
277 	WMI_MAIN_SERVICE_CHATTER,
278 	WMI_MAIN_SERVICE_COEX_FREQAVOID,
279 	WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
280 	WMI_MAIN_SERVICE_FORCE_FW_HANG,
281 	WMI_MAIN_SERVICE_GPIO,
282 	WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
283 	WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
284 	WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
285 	WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
286 	WMI_MAIN_SERVICE_TX_ENCAP,
287 };
288 
289 enum wmi_10_4_service {
290 	WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
291 	WMI_10_4_SERVICE_SCAN_OFFLOAD,
292 	WMI_10_4_SERVICE_ROAM_OFFLOAD,
293 	WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
294 	WMI_10_4_SERVICE_STA_PWRSAVE,
295 	WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
296 	WMI_10_4_SERVICE_AP_UAPSD,
297 	WMI_10_4_SERVICE_AP_DFS,
298 	WMI_10_4_SERVICE_11AC,
299 	WMI_10_4_SERVICE_BLOCKACK,
300 	WMI_10_4_SERVICE_PHYERR,
301 	WMI_10_4_SERVICE_BCN_FILTER,
302 	WMI_10_4_SERVICE_RTT,
303 	WMI_10_4_SERVICE_RATECTRL,
304 	WMI_10_4_SERVICE_WOW,
305 	WMI_10_4_SERVICE_RATECTRL_CACHE,
306 	WMI_10_4_SERVICE_IRAM_TIDS,
307 	WMI_10_4_SERVICE_BURST,
308 	WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
309 	WMI_10_4_SERVICE_GTK_OFFLOAD,
310 	WMI_10_4_SERVICE_SCAN_SCH,
311 	WMI_10_4_SERVICE_CSA_OFFLOAD,
312 	WMI_10_4_SERVICE_CHATTER,
313 	WMI_10_4_SERVICE_COEX_FREQAVOID,
314 	WMI_10_4_SERVICE_PACKET_POWER_SAVE,
315 	WMI_10_4_SERVICE_FORCE_FW_HANG,
316 	WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
317 	WMI_10_4_SERVICE_GPIO,
318 	WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
319 	WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
320 	WMI_10_4_SERVICE_STA_KEEP_ALIVE,
321 	WMI_10_4_SERVICE_TX_ENCAP,
322 	WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
323 	WMI_10_4_SERVICE_EARLY_RX,
324 	WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
325 	WMI_10_4_SERVICE_TT,
326 	WMI_10_4_SERVICE_ATF,
327 	WMI_10_4_SERVICE_PEER_CACHING,
328 	WMI_10_4_SERVICE_COEX_GPIO,
329 	WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
330 	WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
331 	WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
332 	WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
333 	WMI_10_4_SERVICE_MESH_NON_11S,
334 	WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
335 	WMI_10_4_SERVICE_PEER_STATS,
336 	WMI_10_4_SERVICE_MESH_11S,
337 	WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
338 	WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
339 	WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
340 	WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
341 	WMI_10_4_SERVICE_VDEV_RX_FILTER,
342 	WMI_10_4_SERVICE_BTCOEX,
343 	WMI_10_4_SERVICE_CHECK_CAL_VERSION,
344 	WMI_10_4_SERVICE_DBGLOG_WARN2,
345 	WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
346 	WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
347 	WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
348 	WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
349 	WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
350 	WMI_10_4_SERVICE_TDLS,
351 	WMI_10_4_SERVICE_TDLS_OFFCHAN,
352 	WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
353 	WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
354 	WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
355 	WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
356 	WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
357 	WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
358 	WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
359 	WMI_10_4_SERVICE_TPC_STATS_FINAL,
360 	WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,
361 	WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
362 	WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY,
363 	WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
364 	WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
365 	WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL,
366 	WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
367 	WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT,
368 	WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS,
369 	WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
370 	WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE,
371 	WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT,
372 	WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
373 	WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
374 	WMI_10_4_SERVICE_REPORT_AIRTIME,
375 	WMI_10_4_SERVICE_TX_PWR_PER_PEER,
376 	WMI_10_4_SERVICE_FETCH_PEER_TX_PN,
377 	WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART,
378 	WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS,
379 	WMI_10_4_SERVICE_QINQ_SUPPORT,
380 	WMI_10_4_SERVICE_RESET_CHIP,
381 };
382 
wmi_service_name(enum wmi_service service_id)383 static inline char *wmi_service_name(enum wmi_service service_id)
384 {
385 #define SVCSTR(x) case x: return #x
386 
387 	switch (service_id) {
388 	SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
389 	SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
390 	SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
391 	SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
392 	SVCSTR(WMI_SERVICE_STA_PWRSAVE);
393 	SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
394 	SVCSTR(WMI_SERVICE_AP_UAPSD);
395 	SVCSTR(WMI_SERVICE_AP_DFS);
396 	SVCSTR(WMI_SERVICE_11AC);
397 	SVCSTR(WMI_SERVICE_BLOCKACK);
398 	SVCSTR(WMI_SERVICE_PHYERR);
399 	SVCSTR(WMI_SERVICE_BCN_FILTER);
400 	SVCSTR(WMI_SERVICE_RTT);
401 	SVCSTR(WMI_SERVICE_RATECTRL);
402 	SVCSTR(WMI_SERVICE_WOW);
403 	SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
404 	SVCSTR(WMI_SERVICE_IRAM_TIDS);
405 	SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
406 	SVCSTR(WMI_SERVICE_NLO);
407 	SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
408 	SVCSTR(WMI_SERVICE_SCAN_SCH);
409 	SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
410 	SVCSTR(WMI_SERVICE_CHATTER);
411 	SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
412 	SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
413 	SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
414 	SVCSTR(WMI_SERVICE_GPIO);
415 	SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
416 	SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
417 	SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
418 	SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
419 	SVCSTR(WMI_SERVICE_TX_ENCAP);
420 	SVCSTR(WMI_SERVICE_BURST);
421 	SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
422 	SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
423 	SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
424 	SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
425 	SVCSTR(WMI_SERVICE_EARLY_RX);
426 	SVCSTR(WMI_SERVICE_STA_SMPS);
427 	SVCSTR(WMI_SERVICE_FWTEST);
428 	SVCSTR(WMI_SERVICE_STA_WMMAC);
429 	SVCSTR(WMI_SERVICE_TDLS);
430 	SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
431 	SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
432 	SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
433 	SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
434 	SVCSTR(WMI_SERVICE_WLAN_HB);
435 	SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
436 	SVCSTR(WMI_SERVICE_BATCH_SCAN);
437 	SVCSTR(WMI_SERVICE_QPOWER);
438 	SVCSTR(WMI_SERVICE_PLMREQ);
439 	SVCSTR(WMI_SERVICE_THERMAL_MGMT);
440 	SVCSTR(WMI_SERVICE_RMC);
441 	SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
442 	SVCSTR(WMI_SERVICE_COEX_SAR);
443 	SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
444 	SVCSTR(WMI_SERVICE_NAN);
445 	SVCSTR(WMI_SERVICE_L1SS_STAT);
446 	SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
447 	SVCSTR(WMI_SERVICE_OBSS_SCAN);
448 	SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
449 	SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
450 	SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
451 	SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
452 	SVCSTR(WMI_SERVICE_LPASS);
453 	SVCSTR(WMI_SERVICE_EXTSCAN);
454 	SVCSTR(WMI_SERVICE_D0WOW);
455 	SVCSTR(WMI_SERVICE_HSOFFLOAD);
456 	SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
457 	SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
458 	SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
459 	SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
460 	SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
461 	SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
462 	SVCSTR(WMI_SERVICE_ATF);
463 	SVCSTR(WMI_SERVICE_COEX_GPIO);
464 	SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
465 	SVCSTR(WMI_SERVICE_TT);
466 	SVCSTR(WMI_SERVICE_PEER_CACHING);
467 	SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
468 	SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
469 	SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
470 	SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
471 	SVCSTR(WMI_SERVICE_MESH_11S);
472 	SVCSTR(WMI_SERVICE_MESH_NON_11S);
473 	SVCSTR(WMI_SERVICE_PEER_STATS);
474 	SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
475 	SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);
476 	SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
477 	SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
478 	SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
479 	SVCSTR(WMI_SERVICE_VDEV_RX_FILTER);
480 	SVCSTR(WMI_SERVICE_BTCOEX);
481 	SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION);
482 	SVCSTR(WMI_SERVICE_DBGLOG_WARN2);
483 	SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE);
484 	SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT);
485 	SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT);
486 	SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT);
487 	SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT);
488 	SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE);
489 	SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY);
490 	SVCSTR(WMI_SERVICE_MGMT_TX_WMI);
491 	SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH);
492 	SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS);
493 	SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT);
494 	SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);
495 	SVCSTR(WMI_SERVICE_RESET_CHIP);
496 	SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT);
497 	SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);
498 	SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT);
499 	SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT);
500 	SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT);
501 	SVCSTR(WMI_SERVICE_THERM_THROT);
502 	SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
503 	SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
504 	SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
505 	SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
506 	SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
507 	SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
508 	SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
509 	SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
510 
511 	case WMI_SERVICE_MAX:
512 		return NULL;
513 	}
514 
515 #undef SVCSTR
516 
517 	return NULL;
518 }
519 
520 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
521 	((svc_id) < (len) && \
522 	 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
523 	 BIT((svc_id) % (sizeof(u32))))
524 
525 /* This extension is required to accommodate new services, current limit
526  * for wmi_services is 64 as target is using only 4-bits of each 32-bit
527  * wmi_service word. Extending this to make use of remaining unused bits
528  * for new services.
529  */
530 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
531 	((svc_id) >= (len) && \
532 	__le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \
533 	BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4))
534 
535 #define SVCMAP(x, y, len) \
536 	do { \
537 		if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \
538 		    (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \
539 			__set_bit(y, out); \
540 	} while (0)
541 
wmi_10x_svc_map(const __le32 * in,unsigned long * out,size_t len)542 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
543 				   size_t len)
544 {
545 	SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
546 	       WMI_SERVICE_BEACON_OFFLOAD, len);
547 	SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
548 	       WMI_SERVICE_SCAN_OFFLOAD, len);
549 	SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
550 	       WMI_SERVICE_ROAM_OFFLOAD, len);
551 	SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
552 	       WMI_SERVICE_BCN_MISS_OFFLOAD, len);
553 	SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
554 	       WMI_SERVICE_STA_PWRSAVE, len);
555 	SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
556 	       WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
557 	SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
558 	       WMI_SERVICE_AP_UAPSD, len);
559 	SVCMAP(WMI_10X_SERVICE_AP_DFS,
560 	       WMI_SERVICE_AP_DFS, len);
561 	SVCMAP(WMI_10X_SERVICE_11AC,
562 	       WMI_SERVICE_11AC, len);
563 	SVCMAP(WMI_10X_SERVICE_BLOCKACK,
564 	       WMI_SERVICE_BLOCKACK, len);
565 	SVCMAP(WMI_10X_SERVICE_PHYERR,
566 	       WMI_SERVICE_PHYERR, len);
567 	SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
568 	       WMI_SERVICE_BCN_FILTER, len);
569 	SVCMAP(WMI_10X_SERVICE_RTT,
570 	       WMI_SERVICE_RTT, len);
571 	SVCMAP(WMI_10X_SERVICE_RATECTRL,
572 	       WMI_SERVICE_RATECTRL, len);
573 	SVCMAP(WMI_10X_SERVICE_WOW,
574 	       WMI_SERVICE_WOW, len);
575 	SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
576 	       WMI_SERVICE_RATECTRL_CACHE, len);
577 	SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
578 	       WMI_SERVICE_IRAM_TIDS, len);
579 	SVCMAP(WMI_10X_SERVICE_BURST,
580 	       WMI_SERVICE_BURST, len);
581 	SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
582 	       WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
583 	SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
584 	       WMI_SERVICE_FORCE_FW_HANG, len);
585 	SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
586 	       WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
587 	SVCMAP(WMI_10X_SERVICE_ATF,
588 	       WMI_SERVICE_ATF, len);
589 	SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
590 	       WMI_SERVICE_COEX_GPIO, len);
591 	SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
592 	       WMI_SERVICE_AUX_SPECTRAL_INTF, len);
593 	SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
594 	       WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
595 	SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
596 	       WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
597 	SVCMAP(WMI_10X_SERVICE_MESH,
598 	       WMI_SERVICE_MESH_11S, len);
599 	SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
600 	       WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
601 	SVCMAP(WMI_10X_SERVICE_PEER_STATS,
602 	       WMI_SERVICE_PEER_STATS, len);
603 	SVCMAP(WMI_10X_SERVICE_RESET_CHIP,
604 	       WMI_SERVICE_RESET_CHIP, len);
605 	SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
606 	       WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
607 	SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
608 	       WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len);
609 	SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
610 	       WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
611 }
612 
wmi_main_svc_map(const __le32 * in,unsigned long * out,size_t len)613 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
614 				    size_t len)
615 {
616 	SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
617 	       WMI_SERVICE_BEACON_OFFLOAD, len);
618 	SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
619 	       WMI_SERVICE_SCAN_OFFLOAD, len);
620 	SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
621 	       WMI_SERVICE_ROAM_OFFLOAD, len);
622 	SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
623 	       WMI_SERVICE_BCN_MISS_OFFLOAD, len);
624 	SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
625 	       WMI_SERVICE_STA_PWRSAVE, len);
626 	SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
627 	       WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
628 	SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
629 	       WMI_SERVICE_AP_UAPSD, len);
630 	SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
631 	       WMI_SERVICE_AP_DFS, len);
632 	SVCMAP(WMI_MAIN_SERVICE_11AC,
633 	       WMI_SERVICE_11AC, len);
634 	SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
635 	       WMI_SERVICE_BLOCKACK, len);
636 	SVCMAP(WMI_MAIN_SERVICE_PHYERR,
637 	       WMI_SERVICE_PHYERR, len);
638 	SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
639 	       WMI_SERVICE_BCN_FILTER, len);
640 	SVCMAP(WMI_MAIN_SERVICE_RTT,
641 	       WMI_SERVICE_RTT, len);
642 	SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
643 	       WMI_SERVICE_RATECTRL, len);
644 	SVCMAP(WMI_MAIN_SERVICE_WOW,
645 	       WMI_SERVICE_WOW, len);
646 	SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
647 	       WMI_SERVICE_RATECTRL_CACHE, len);
648 	SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
649 	       WMI_SERVICE_IRAM_TIDS, len);
650 	SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
651 	       WMI_SERVICE_ARPNS_OFFLOAD, len);
652 	SVCMAP(WMI_MAIN_SERVICE_NLO,
653 	       WMI_SERVICE_NLO, len);
654 	SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
655 	       WMI_SERVICE_GTK_OFFLOAD, len);
656 	SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
657 	       WMI_SERVICE_SCAN_SCH, len);
658 	SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
659 	       WMI_SERVICE_CSA_OFFLOAD, len);
660 	SVCMAP(WMI_MAIN_SERVICE_CHATTER,
661 	       WMI_SERVICE_CHATTER, len);
662 	SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
663 	       WMI_SERVICE_COEX_FREQAVOID, len);
664 	SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
665 	       WMI_SERVICE_PACKET_POWER_SAVE, len);
666 	SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
667 	       WMI_SERVICE_FORCE_FW_HANG, len);
668 	SVCMAP(WMI_MAIN_SERVICE_GPIO,
669 	       WMI_SERVICE_GPIO, len);
670 	SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
671 	       WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
672 	SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
673 	       WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
674 	SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
675 	       WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
676 	SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
677 	       WMI_SERVICE_STA_KEEP_ALIVE, len);
678 	SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
679 	       WMI_SERVICE_TX_ENCAP, len);
680 }
681 
wmi_10_4_svc_map(const __le32 * in,unsigned long * out,size_t len)682 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
683 				    size_t len)
684 {
685 	SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
686 	       WMI_SERVICE_BEACON_OFFLOAD, len);
687 	SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
688 	       WMI_SERVICE_SCAN_OFFLOAD, len);
689 	SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
690 	       WMI_SERVICE_ROAM_OFFLOAD, len);
691 	SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
692 	       WMI_SERVICE_BCN_MISS_OFFLOAD, len);
693 	SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
694 	       WMI_SERVICE_STA_PWRSAVE, len);
695 	SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
696 	       WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
697 	SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
698 	       WMI_SERVICE_AP_UAPSD, len);
699 	SVCMAP(WMI_10_4_SERVICE_AP_DFS,
700 	       WMI_SERVICE_AP_DFS, len);
701 	SVCMAP(WMI_10_4_SERVICE_11AC,
702 	       WMI_SERVICE_11AC, len);
703 	SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
704 	       WMI_SERVICE_BLOCKACK, len);
705 	SVCMAP(WMI_10_4_SERVICE_PHYERR,
706 	       WMI_SERVICE_PHYERR, len);
707 	SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
708 	       WMI_SERVICE_BCN_FILTER, len);
709 	SVCMAP(WMI_10_4_SERVICE_RTT,
710 	       WMI_SERVICE_RTT, len);
711 	SVCMAP(WMI_10_4_SERVICE_RATECTRL,
712 	       WMI_SERVICE_RATECTRL, len);
713 	SVCMAP(WMI_10_4_SERVICE_WOW,
714 	       WMI_SERVICE_WOW, len);
715 	SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
716 	       WMI_SERVICE_RATECTRL_CACHE, len);
717 	SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
718 	       WMI_SERVICE_IRAM_TIDS, len);
719 	SVCMAP(WMI_10_4_SERVICE_BURST,
720 	       WMI_SERVICE_BURST, len);
721 	SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
722 	       WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
723 	SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
724 	       WMI_SERVICE_GTK_OFFLOAD, len);
725 	SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
726 	       WMI_SERVICE_SCAN_SCH, len);
727 	SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
728 	       WMI_SERVICE_CSA_OFFLOAD, len);
729 	SVCMAP(WMI_10_4_SERVICE_CHATTER,
730 	       WMI_SERVICE_CHATTER, len);
731 	SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
732 	       WMI_SERVICE_COEX_FREQAVOID, len);
733 	SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
734 	       WMI_SERVICE_PACKET_POWER_SAVE, len);
735 	SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
736 	       WMI_SERVICE_FORCE_FW_HANG, len);
737 	SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
738 	       WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
739 	SVCMAP(WMI_10_4_SERVICE_GPIO,
740 	       WMI_SERVICE_GPIO, len);
741 	SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
742 	       WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
743 	SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
744 	       WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
745 	SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
746 	       WMI_SERVICE_STA_KEEP_ALIVE, len);
747 	SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
748 	       WMI_SERVICE_TX_ENCAP, len);
749 	SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
750 	       WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
751 	SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
752 	       WMI_SERVICE_EARLY_RX, len);
753 	SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
754 	       WMI_SERVICE_ENHANCED_PROXY_STA, len);
755 	SVCMAP(WMI_10_4_SERVICE_TT,
756 	       WMI_SERVICE_TT, len);
757 	SVCMAP(WMI_10_4_SERVICE_ATF,
758 	       WMI_SERVICE_ATF, len);
759 	SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
760 	       WMI_SERVICE_PEER_CACHING, len);
761 	SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
762 	       WMI_SERVICE_COEX_GPIO, len);
763 	SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
764 	       WMI_SERVICE_AUX_SPECTRAL_INTF, len);
765 	SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
766 	       WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
767 	SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
768 	       WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
769 	SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
770 	       WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
771 	SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
772 	       WMI_SERVICE_MESH_NON_11S, len);
773 	SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
774 	       WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
775 	SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
776 	       WMI_SERVICE_PEER_STATS, len);
777 	SVCMAP(WMI_10_4_SERVICE_MESH_11S,
778 	       WMI_SERVICE_MESH_11S, len);
779 	SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
780 	       WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);
781 	SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
782 	       WMI_SERVICE_TX_MODE_PUSH_ONLY, len);
783 	SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
784 	       WMI_SERVICE_TX_MODE_PUSH_PULL, len);
785 	SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
786 	       WMI_SERVICE_TX_MODE_DYNAMIC, len);
787 	SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER,
788 	       WMI_SERVICE_VDEV_RX_FILTER, len);
789 	SVCMAP(WMI_10_4_SERVICE_BTCOEX,
790 	       WMI_SERVICE_BTCOEX, len);
791 	SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION,
792 	       WMI_SERVICE_CHECK_CAL_VERSION, len);
793 	SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2,
794 	       WMI_SERVICE_DBGLOG_WARN2, len);
795 	SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
796 	       WMI_SERVICE_BTCOEX_DUTY_CYCLE, len);
797 	SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
798 	       WMI_SERVICE_4_WIRE_COEX_SUPPORT, len);
799 	SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
800 	       WMI_SERVICE_EXTENDED_NSS_SUPPORT, len);
801 	SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
802 	       WMI_SERVICE_PROG_GPIO_BAND_SELECT, len);
803 	SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
804 	       WMI_SERVICE_SMART_LOGGING_SUPPORT, len);
805 	SVCMAP(WMI_10_4_SERVICE_TDLS,
806 	       WMI_SERVICE_TDLS, len);
807 	SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN,
808 	       WMI_SERVICE_TDLS_OFFCHAN, len);
809 	SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
810 	       WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len);
811 	SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
812 	       WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len);
813 	SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
814 	       WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len);
815 	SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
816 	       WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len);
817 	SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
818 	       WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len);
819 	SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
820 	       WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
821 	SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
822 	       WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len);
823 	SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL,
824 	       WMI_SERVICE_TPC_STATS_FINAL, len);
825 	SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
826 	       WMI_SERVICE_TX_DATA_ACK_RSSI, len);
827 	SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
828 	       WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len);
829 	SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
830 	       WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len);
831 	SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
832 	       WMI_SERVICE_RTT_RESPONDER_ROLE, len);
833 	SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
834 	       WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
835 	SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
836 	       WMI_SERVICE_REPORT_AIRTIME, len);
837 	SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER,
838 	       WMI_SERVICE_TX_PWR_PER_PEER, len);
839 	SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
840 	       WMI_SERVICE_RESET_CHIP, len);
841 	SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
842 	       WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
843 	SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
844 	       WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
845 }
846 
847 #undef SVCMAP
848 
849 /* 2 word representation of MAC addr */
850 struct wmi_mac_addr {
851 	union {
852 		u8 addr[6];
853 		struct {
854 			u32 word0;
855 			u32 word1;
856 		} __packed;
857 	} __packed;
858 } __packed;
859 
860 struct wmi_cmd_map {
861 	u32 init_cmdid;
862 	u32 start_scan_cmdid;
863 	u32 stop_scan_cmdid;
864 	u32 scan_chan_list_cmdid;
865 	u32 scan_sch_prio_tbl_cmdid;
866 	u32 scan_prob_req_oui_cmdid;
867 	u32 pdev_set_regdomain_cmdid;
868 	u32 pdev_set_channel_cmdid;
869 	u32 pdev_set_param_cmdid;
870 	u32 pdev_pktlog_enable_cmdid;
871 	u32 pdev_pktlog_disable_cmdid;
872 	u32 pdev_set_wmm_params_cmdid;
873 	u32 pdev_set_ht_cap_ie_cmdid;
874 	u32 pdev_set_vht_cap_ie_cmdid;
875 	u32 pdev_set_dscp_tid_map_cmdid;
876 	u32 pdev_set_quiet_mode_cmdid;
877 	u32 pdev_green_ap_ps_enable_cmdid;
878 	u32 pdev_get_tpc_config_cmdid;
879 	u32 pdev_set_base_macaddr_cmdid;
880 	u32 vdev_create_cmdid;
881 	u32 vdev_delete_cmdid;
882 	u32 vdev_start_request_cmdid;
883 	u32 vdev_restart_request_cmdid;
884 	u32 vdev_up_cmdid;
885 	u32 vdev_stop_cmdid;
886 	u32 vdev_down_cmdid;
887 	u32 vdev_set_param_cmdid;
888 	u32 vdev_install_key_cmdid;
889 	u32 peer_create_cmdid;
890 	u32 peer_delete_cmdid;
891 	u32 peer_flush_tids_cmdid;
892 	u32 peer_set_param_cmdid;
893 	u32 peer_assoc_cmdid;
894 	u32 peer_add_wds_entry_cmdid;
895 	u32 peer_remove_wds_entry_cmdid;
896 	u32 peer_mcast_group_cmdid;
897 	u32 bcn_tx_cmdid;
898 	u32 pdev_send_bcn_cmdid;
899 	u32 bcn_tmpl_cmdid;
900 	u32 bcn_filter_rx_cmdid;
901 	u32 prb_req_filter_rx_cmdid;
902 	u32 mgmt_tx_cmdid;
903 	u32 mgmt_tx_send_cmdid;
904 	u32 prb_tmpl_cmdid;
905 	u32 addba_clear_resp_cmdid;
906 	u32 addba_send_cmdid;
907 	u32 addba_status_cmdid;
908 	u32 delba_send_cmdid;
909 	u32 addba_set_resp_cmdid;
910 	u32 send_singleamsdu_cmdid;
911 	u32 sta_powersave_mode_cmdid;
912 	u32 sta_powersave_param_cmdid;
913 	u32 sta_mimo_ps_mode_cmdid;
914 	u32 pdev_dfs_enable_cmdid;
915 	u32 pdev_dfs_disable_cmdid;
916 	u32 roam_scan_mode;
917 	u32 roam_scan_rssi_threshold;
918 	u32 roam_scan_period;
919 	u32 roam_scan_rssi_change_threshold;
920 	u32 roam_ap_profile;
921 	u32 ofl_scan_add_ap_profile;
922 	u32 ofl_scan_remove_ap_profile;
923 	u32 ofl_scan_period;
924 	u32 p2p_dev_set_device_info;
925 	u32 p2p_dev_set_discoverability;
926 	u32 p2p_go_set_beacon_ie;
927 	u32 p2p_go_set_probe_resp_ie;
928 	u32 p2p_set_vendor_ie_data_cmdid;
929 	u32 ap_ps_peer_param_cmdid;
930 	u32 ap_ps_peer_uapsd_coex_cmdid;
931 	u32 peer_rate_retry_sched_cmdid;
932 	u32 wlan_profile_trigger_cmdid;
933 	u32 wlan_profile_set_hist_intvl_cmdid;
934 	u32 wlan_profile_get_profile_data_cmdid;
935 	u32 wlan_profile_enable_profile_id_cmdid;
936 	u32 wlan_profile_list_profile_id_cmdid;
937 	u32 pdev_suspend_cmdid;
938 	u32 pdev_resume_cmdid;
939 	u32 add_bcn_filter_cmdid;
940 	u32 rmv_bcn_filter_cmdid;
941 	u32 wow_add_wake_pattern_cmdid;
942 	u32 wow_del_wake_pattern_cmdid;
943 	u32 wow_enable_disable_wake_event_cmdid;
944 	u32 wow_enable_cmdid;
945 	u32 wow_hostwakeup_from_sleep_cmdid;
946 	u32 rtt_measreq_cmdid;
947 	u32 rtt_tsf_cmdid;
948 	u32 vdev_spectral_scan_configure_cmdid;
949 	u32 vdev_spectral_scan_enable_cmdid;
950 	u32 request_stats_cmdid;
951 	u32 request_peer_stats_info_cmdid;
952 	u32 set_arp_ns_offload_cmdid;
953 	u32 network_list_offload_config_cmdid;
954 	u32 gtk_offload_cmdid;
955 	u32 csa_offload_enable_cmdid;
956 	u32 csa_offload_chanswitch_cmdid;
957 	u32 chatter_set_mode_cmdid;
958 	u32 peer_tid_addba_cmdid;
959 	u32 peer_tid_delba_cmdid;
960 	u32 sta_dtim_ps_method_cmdid;
961 	u32 sta_uapsd_auto_trig_cmdid;
962 	u32 sta_keepalive_cmd;
963 	u32 echo_cmdid;
964 	u32 pdev_utf_cmdid;
965 	u32 dbglog_cfg_cmdid;
966 	u32 pdev_qvit_cmdid;
967 	u32 pdev_ftm_intg_cmdid;
968 	u32 vdev_set_keepalive_cmdid;
969 	u32 vdev_get_keepalive_cmdid;
970 	u32 force_fw_hang_cmdid;
971 	u32 gpio_config_cmdid;
972 	u32 gpio_output_cmdid;
973 	u32 pdev_get_temperature_cmdid;
974 	u32 vdev_set_wmm_params_cmdid;
975 	u32 tdls_set_state_cmdid;
976 	u32 tdls_peer_update_cmdid;
977 	u32 adaptive_qcs_cmdid;
978 	u32 scan_update_request_cmdid;
979 	u32 vdev_standby_response_cmdid;
980 	u32 vdev_resume_response_cmdid;
981 	u32 wlan_peer_caching_add_peer_cmdid;
982 	u32 wlan_peer_caching_evict_peer_cmdid;
983 	u32 wlan_peer_caching_restore_peer_cmdid;
984 	u32 wlan_peer_caching_print_all_peers_info_cmdid;
985 	u32 peer_update_wds_entry_cmdid;
986 	u32 peer_add_proxy_sta_entry_cmdid;
987 	u32 rtt_keepalive_cmdid;
988 	u32 oem_req_cmdid;
989 	u32 nan_cmdid;
990 	u32 vdev_ratemask_cmdid;
991 	u32 qboost_cfg_cmdid;
992 	u32 pdev_smart_ant_enable_cmdid;
993 	u32 pdev_smart_ant_set_rx_antenna_cmdid;
994 	u32 peer_smart_ant_set_tx_antenna_cmdid;
995 	u32 peer_smart_ant_set_train_info_cmdid;
996 	u32 peer_smart_ant_set_node_config_ops_cmdid;
997 	u32 pdev_set_antenna_switch_table_cmdid;
998 	u32 pdev_set_ctl_table_cmdid;
999 	u32 pdev_set_mimogain_table_cmdid;
1000 	u32 pdev_ratepwr_table_cmdid;
1001 	u32 pdev_ratepwr_chainmsk_table_cmdid;
1002 	u32 pdev_fips_cmdid;
1003 	u32 tt_set_conf_cmdid;
1004 	u32 fwtest_cmdid;
1005 	u32 vdev_atf_request_cmdid;
1006 	u32 peer_atf_request_cmdid;
1007 	u32 pdev_get_ani_cck_config_cmdid;
1008 	u32 pdev_get_ani_ofdm_config_cmdid;
1009 	u32 pdev_reserve_ast_entry_cmdid;
1010 	u32 pdev_get_nfcal_power_cmdid;
1011 	u32 pdev_get_tpc_cmdid;
1012 	u32 pdev_get_ast_info_cmdid;
1013 	u32 vdev_set_dscp_tid_map_cmdid;
1014 	u32 pdev_get_info_cmdid;
1015 	u32 vdev_get_info_cmdid;
1016 	u32 vdev_filter_neighbor_rx_packets_cmdid;
1017 	u32 mu_cal_start_cmdid;
1018 	u32 set_cca_params_cmdid;
1019 	u32 pdev_bss_chan_info_request_cmdid;
1020 	u32 pdev_enable_adaptive_cca_cmdid;
1021 	u32 ext_resource_cfg_cmdid;
1022 	u32 vdev_set_ie_cmdid;
1023 	u32 set_lteu_config_cmdid;
1024 	u32 atf_ssid_grouping_request_cmdid;
1025 	u32 peer_atf_ext_request_cmdid;
1026 	u32 set_periodic_channel_stats_cfg_cmdid;
1027 	u32 peer_bwf_request_cmdid;
1028 	u32 btcoex_cfg_cmdid;
1029 	u32 peer_tx_mu_txmit_count_cmdid;
1030 	u32 peer_tx_mu_txmit_rstcnt_cmdid;
1031 	u32 peer_gid_userpos_list_cmdid;
1032 	u32 pdev_check_cal_version_cmdid;
1033 	u32 coex_version_cfg_cmid;
1034 	u32 pdev_get_rx_filter_cmdid;
1035 	u32 pdev_extended_nss_cfg_cmdid;
1036 	u32 vdev_set_scan_nac_rssi_cmdid;
1037 	u32 prog_gpio_band_select_cmdid;
1038 	u32 config_smart_logging_cmdid;
1039 	u32 debug_fatal_condition_cmdid;
1040 	u32 get_tsf_timer_cmdid;
1041 	u32 pdev_get_tpc_table_cmdid;
1042 	u32 vdev_sifs_trigger_time_cmdid;
1043 	u32 pdev_wds_entry_list_cmdid;
1044 	u32 tdls_set_offchan_mode_cmdid;
1045 	u32 radar_found_cmdid;
1046 	u32 set_bb_timing_cmdid;
1047 	u32 per_peer_per_tid_config_cmdid;
1048 };
1049 
1050 /*
1051  * wmi command groups.
1052  */
1053 enum wmi_cmd_group {
1054 	/* 0 to 2 are reserved */
1055 	WMI_GRP_START = 0x3,
1056 	WMI_GRP_SCAN = WMI_GRP_START,
1057 	WMI_GRP_PDEV,
1058 	WMI_GRP_VDEV,
1059 	WMI_GRP_PEER,
1060 	WMI_GRP_MGMT,
1061 	WMI_GRP_BA_NEG,
1062 	WMI_GRP_STA_PS,
1063 	WMI_GRP_DFS,
1064 	WMI_GRP_ROAM,
1065 	WMI_GRP_OFL_SCAN,
1066 	WMI_GRP_P2P,
1067 	WMI_GRP_AP_PS,
1068 	WMI_GRP_RATE_CTRL,
1069 	WMI_GRP_PROFILE,
1070 	WMI_GRP_SUSPEND,
1071 	WMI_GRP_BCN_FILTER,
1072 	WMI_GRP_WOW,
1073 	WMI_GRP_RTT,
1074 	WMI_GRP_SPECTRAL,
1075 	WMI_GRP_STATS,
1076 	WMI_GRP_ARP_NS_OFL,
1077 	WMI_GRP_NLO_OFL,
1078 	WMI_GRP_GTK_OFL,
1079 	WMI_GRP_CSA_OFL,
1080 	WMI_GRP_CHATTER,
1081 	WMI_GRP_TID_ADDBA,
1082 	WMI_GRP_MISC,
1083 	WMI_GRP_GPIO,
1084 };
1085 
1086 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
1087 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
1088 
1089 #define WMI_CMD_UNSUPPORTED 0
1090 
1091 /* Command IDs and command events for MAIN FW. */
1092 enum wmi_cmd_id {
1093 	WMI_INIT_CMDID = 0x1,
1094 
1095 	/* Scan specific commands */
1096 	WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
1097 	WMI_STOP_SCAN_CMDID,
1098 	WMI_SCAN_CHAN_LIST_CMDID,
1099 	WMI_SCAN_SCH_PRIO_TBL_CMDID,
1100 
1101 	/* PDEV (physical device) specific commands */
1102 	WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
1103 	WMI_PDEV_SET_CHANNEL_CMDID,
1104 	WMI_PDEV_SET_PARAM_CMDID,
1105 	WMI_PDEV_PKTLOG_ENABLE_CMDID,
1106 	WMI_PDEV_PKTLOG_DISABLE_CMDID,
1107 	WMI_PDEV_SET_WMM_PARAMS_CMDID,
1108 	WMI_PDEV_SET_HT_CAP_IE_CMDID,
1109 	WMI_PDEV_SET_VHT_CAP_IE_CMDID,
1110 	WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
1111 	WMI_PDEV_SET_QUIET_MODE_CMDID,
1112 	WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1113 	WMI_PDEV_GET_TPC_CONFIG_CMDID,
1114 	WMI_PDEV_SET_BASE_MACADDR_CMDID,
1115 
1116 	/* VDEV (virtual device) specific commands */
1117 	WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
1118 	WMI_VDEV_DELETE_CMDID,
1119 	WMI_VDEV_START_REQUEST_CMDID,
1120 	WMI_VDEV_RESTART_REQUEST_CMDID,
1121 	WMI_VDEV_UP_CMDID,
1122 	WMI_VDEV_STOP_CMDID,
1123 	WMI_VDEV_DOWN_CMDID,
1124 	WMI_VDEV_SET_PARAM_CMDID,
1125 	WMI_VDEV_INSTALL_KEY_CMDID,
1126 
1127 	/* peer specific commands */
1128 	WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
1129 	WMI_PEER_DELETE_CMDID,
1130 	WMI_PEER_FLUSH_TIDS_CMDID,
1131 	WMI_PEER_SET_PARAM_CMDID,
1132 	WMI_PEER_ASSOC_CMDID,
1133 	WMI_PEER_ADD_WDS_ENTRY_CMDID,
1134 	WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
1135 	WMI_PEER_MCAST_GROUP_CMDID,
1136 
1137 	/* beacon/management specific commands */
1138 	WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
1139 	WMI_PDEV_SEND_BCN_CMDID,
1140 	WMI_BCN_TMPL_CMDID,
1141 	WMI_BCN_FILTER_RX_CMDID,
1142 	WMI_PRB_REQ_FILTER_RX_CMDID,
1143 	WMI_MGMT_TX_CMDID,
1144 	WMI_PRB_TMPL_CMDID,
1145 
1146 	/* commands to directly control BA negotiation directly from host. */
1147 	WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
1148 	WMI_ADDBA_SEND_CMDID,
1149 	WMI_ADDBA_STATUS_CMDID,
1150 	WMI_DELBA_SEND_CMDID,
1151 	WMI_ADDBA_SET_RESP_CMDID,
1152 	WMI_SEND_SINGLEAMSDU_CMDID,
1153 
1154 	/* Station power save specific config */
1155 	WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
1156 	WMI_STA_POWERSAVE_PARAM_CMDID,
1157 	WMI_STA_MIMO_PS_MODE_CMDID,
1158 
1159 	/** DFS-specific commands */
1160 	WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
1161 	WMI_PDEV_DFS_DISABLE_CMDID,
1162 
1163 	/* Roaming specific  commands */
1164 	WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
1165 	WMI_ROAM_SCAN_RSSI_THRESHOLD,
1166 	WMI_ROAM_SCAN_PERIOD,
1167 	WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1168 	WMI_ROAM_AP_PROFILE,
1169 
1170 	/* offload scan specific commands */
1171 	WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
1172 	WMI_OFL_SCAN_REMOVE_AP_PROFILE,
1173 	WMI_OFL_SCAN_PERIOD,
1174 
1175 	/* P2P specific commands */
1176 	WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
1177 	WMI_P2P_DEV_SET_DISCOVERABILITY,
1178 	WMI_P2P_GO_SET_BEACON_IE,
1179 	WMI_P2P_GO_SET_PROBE_RESP_IE,
1180 	WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
1181 
1182 	/* AP power save specific config */
1183 	WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
1184 	WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
1185 
1186 	/* Rate-control specific commands */
1187 	WMI_PEER_RATE_RETRY_SCHED_CMDID =
1188 	WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
1189 
1190 	/* WLAN Profiling commands. */
1191 	WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
1192 	WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1193 	WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1194 	WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1195 	WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1196 
1197 	/* Suspend resume command Ids */
1198 	WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
1199 	WMI_PDEV_RESUME_CMDID,
1200 
1201 	/* Beacon filter commands */
1202 	WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
1203 	WMI_RMV_BCN_FILTER_CMDID,
1204 
1205 	/* WOW Specific WMI commands*/
1206 	WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
1207 	WMI_WOW_DEL_WAKE_PATTERN_CMDID,
1208 	WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1209 	WMI_WOW_ENABLE_CMDID,
1210 	WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1211 
1212 	/* RTT measurement related cmd */
1213 	WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
1214 	WMI_RTT_TSF_CMDID,
1215 
1216 	/* spectral scan commands */
1217 	WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
1218 	WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1219 
1220 	/* F/W stats */
1221 	WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
1222 
1223 	/* ARP OFFLOAD REQUEST*/
1224 	WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
1225 
1226 	/* NS offload confid*/
1227 	WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
1228 
1229 	/* GTK offload Specific WMI commands*/
1230 	WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
1231 
1232 	/* CSA offload Specific WMI commands*/
1233 	WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
1234 	WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
1235 
1236 	/* Chatter commands*/
1237 	WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
1238 
1239 	/* addba specific commands */
1240 	WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
1241 	WMI_PEER_TID_DELBA_CMDID,
1242 
1243 	/* set station mimo powersave method */
1244 	WMI_STA_DTIM_PS_METHOD_CMDID,
1245 	/* Configure the Station UAPSD AC Auto Trigger Parameters */
1246 	WMI_STA_UAPSD_AUTO_TRIG_CMDID,
1247 
1248 	/* STA Keep alive parameter configuration,
1249 	 * Requires WMI_SERVICE_STA_KEEP_ALIVE
1250 	 */
1251 	WMI_STA_KEEPALIVE_CMD,
1252 
1253 	/* misc command group */
1254 	WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
1255 	WMI_PDEV_UTF_CMDID,
1256 	WMI_DBGLOG_CFG_CMDID,
1257 	WMI_PDEV_QVIT_CMDID,
1258 	WMI_PDEV_FTM_INTG_CMDID,
1259 	WMI_VDEV_SET_KEEPALIVE_CMDID,
1260 	WMI_VDEV_GET_KEEPALIVE_CMDID,
1261 	WMI_FORCE_FW_HANG_CMDID,
1262 
1263 	/* GPIO Configuration */
1264 	WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
1265 	WMI_GPIO_OUTPUT_CMDID,
1266 };
1267 
1268 enum wmi_event_id {
1269 	WMI_SERVICE_READY_EVENTID = 0x1,
1270 	WMI_READY_EVENTID,
1271 	WMI_SERVICE_AVAILABLE_EVENTID,
1272 
1273 	/* Scan specific events */
1274 	WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
1275 
1276 	/* PDEV specific events */
1277 	WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
1278 	WMI_CHAN_INFO_EVENTID,
1279 	WMI_PHYERR_EVENTID,
1280 
1281 	/* VDEV specific events */
1282 	WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
1283 	WMI_VDEV_STOPPED_EVENTID,
1284 	WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1285 
1286 	/* peer specific events */
1287 	WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
1288 
1289 	/* beacon/mgmt specific events */
1290 	WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
1291 	WMI_HOST_SWBA_EVENTID,
1292 	WMI_TBTTOFFSET_UPDATE_EVENTID,
1293 
1294 	/* ADDBA Related WMI Events*/
1295 	WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
1296 	WMI_TX_ADDBA_COMPLETE_EVENTID,
1297 
1298 	/* Roam event to trigger roaming on host */
1299 	WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
1300 	WMI_PROFILE_MATCH,
1301 
1302 	/* WoW */
1303 	WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
1304 
1305 	/* RTT */
1306 	WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
1307 	WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1308 	WMI_RTT_ERROR_REPORT_EVENTID,
1309 
1310 	/* GTK offload */
1311 	WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
1312 	WMI_GTK_REKEY_FAIL_EVENTID,
1313 
1314 	/* CSA IE received event */
1315 	WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
1316 
1317 	/* Misc events */
1318 	WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
1319 	WMI_PDEV_UTF_EVENTID,
1320 	WMI_DEBUG_MESG_EVENTID,
1321 	WMI_UPDATE_STATS_EVENTID,
1322 	WMI_DEBUG_PRINT_EVENTID,
1323 	WMI_DCS_INTERFERENCE_EVENTID,
1324 	WMI_PDEV_QVIT_EVENTID,
1325 	WMI_WLAN_PROFILE_DATA_EVENTID,
1326 	WMI_PDEV_FTM_INTG_EVENTID,
1327 	WMI_WLAN_FREQ_AVOID_EVENTID,
1328 	WMI_VDEV_GET_KEEPALIVE_EVENTID,
1329 
1330 	/* GPIO Event */
1331 	WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
1332 };
1333 
1334 /* Command IDs and command events for 10.X firmware */
1335 enum wmi_10x_cmd_id {
1336 	WMI_10X_START_CMDID = 0x9000,
1337 	WMI_10X_END_CMDID = 0x9FFF,
1338 
1339 	/* initialize the wlan sub system */
1340 	WMI_10X_INIT_CMDID,
1341 
1342 	/* Scan specific commands */
1343 
1344 	WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
1345 	WMI_10X_STOP_SCAN_CMDID,
1346 	WMI_10X_SCAN_CHAN_LIST_CMDID,
1347 	WMI_10X_ECHO_CMDID,
1348 
1349 	/* PDEV(physical device) specific commands */
1350 	WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1351 	WMI_10X_PDEV_SET_CHANNEL_CMDID,
1352 	WMI_10X_PDEV_SET_PARAM_CMDID,
1353 	WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1354 	WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1355 	WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1356 	WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1357 	WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1358 	WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1359 	WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1360 	WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1361 	WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1362 	WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1363 
1364 	/* VDEV(virtual device) specific commands */
1365 	WMI_10X_VDEV_CREATE_CMDID,
1366 	WMI_10X_VDEV_DELETE_CMDID,
1367 	WMI_10X_VDEV_START_REQUEST_CMDID,
1368 	WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1369 	WMI_10X_VDEV_UP_CMDID,
1370 	WMI_10X_VDEV_STOP_CMDID,
1371 	WMI_10X_VDEV_DOWN_CMDID,
1372 	WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1373 	WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1374 	WMI_10X_VDEV_SET_PARAM_CMDID,
1375 	WMI_10X_VDEV_INSTALL_KEY_CMDID,
1376 
1377 	/* peer specific commands */
1378 	WMI_10X_PEER_CREATE_CMDID,
1379 	WMI_10X_PEER_DELETE_CMDID,
1380 	WMI_10X_PEER_FLUSH_TIDS_CMDID,
1381 	WMI_10X_PEER_SET_PARAM_CMDID,
1382 	WMI_10X_PEER_ASSOC_CMDID,
1383 	WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1384 	WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1385 	WMI_10X_PEER_MCAST_GROUP_CMDID,
1386 
1387 	/* beacon/management specific commands */
1388 
1389 	WMI_10X_BCN_TX_CMDID,
1390 	WMI_10X_BCN_PRB_TMPL_CMDID,
1391 	WMI_10X_BCN_FILTER_RX_CMDID,
1392 	WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1393 	WMI_10X_MGMT_TX_CMDID,
1394 
1395 	/* commands to directly control ba negotiation directly from host. */
1396 	WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1397 	WMI_10X_ADDBA_SEND_CMDID,
1398 	WMI_10X_ADDBA_STATUS_CMDID,
1399 	WMI_10X_DELBA_SEND_CMDID,
1400 	WMI_10X_ADDBA_SET_RESP_CMDID,
1401 	WMI_10X_SEND_SINGLEAMSDU_CMDID,
1402 
1403 	/* Station power save specific config */
1404 	WMI_10X_STA_POWERSAVE_MODE_CMDID,
1405 	WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1406 	WMI_10X_STA_MIMO_PS_MODE_CMDID,
1407 
1408 	/* set debug log config */
1409 	WMI_10X_DBGLOG_CFG_CMDID,
1410 
1411 	/* DFS-specific commands */
1412 	WMI_10X_PDEV_DFS_ENABLE_CMDID,
1413 	WMI_10X_PDEV_DFS_DISABLE_CMDID,
1414 
1415 	/* QVIT specific command id */
1416 	WMI_10X_PDEV_QVIT_CMDID,
1417 
1418 	/* Offload Scan and Roaming related  commands */
1419 	WMI_10X_ROAM_SCAN_MODE,
1420 	WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1421 	WMI_10X_ROAM_SCAN_PERIOD,
1422 	WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1423 	WMI_10X_ROAM_AP_PROFILE,
1424 	WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1425 	WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1426 	WMI_10X_OFL_SCAN_PERIOD,
1427 
1428 	/* P2P specific commands */
1429 	WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1430 	WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1431 	WMI_10X_P2P_GO_SET_BEACON_IE,
1432 	WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1433 
1434 	/* AP power save specific config */
1435 	WMI_10X_AP_PS_PEER_PARAM_CMDID,
1436 	WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1437 
1438 	/* Rate-control specific commands */
1439 	WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1440 
1441 	/* WLAN Profiling commands. */
1442 	WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1443 	WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1444 	WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1445 	WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1446 	WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1447 
1448 	/* Suspend resume command Ids */
1449 	WMI_10X_PDEV_SUSPEND_CMDID,
1450 	WMI_10X_PDEV_RESUME_CMDID,
1451 
1452 	/* Beacon filter commands */
1453 	WMI_10X_ADD_BCN_FILTER_CMDID,
1454 	WMI_10X_RMV_BCN_FILTER_CMDID,
1455 
1456 	/* WOW Specific WMI commands*/
1457 	WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1458 	WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1459 	WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1460 	WMI_10X_WOW_ENABLE_CMDID,
1461 	WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1462 
1463 	/* RTT measurement related cmd */
1464 	WMI_10X_RTT_MEASREQ_CMDID,
1465 	WMI_10X_RTT_TSF_CMDID,
1466 
1467 	/* transmit beacon by value */
1468 	WMI_10X_PDEV_SEND_BCN_CMDID,
1469 
1470 	/* F/W stats */
1471 	WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1472 	WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1473 	WMI_10X_REQUEST_STATS_CMDID,
1474 
1475 	/* GPIO Configuration */
1476 	WMI_10X_GPIO_CONFIG_CMDID,
1477 	WMI_10X_GPIO_OUTPUT_CMDID,
1478 
1479 	WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
1480 };
1481 
1482 enum wmi_10x_event_id {
1483 	WMI_10X_SERVICE_READY_EVENTID = 0x8000,
1484 	WMI_10X_READY_EVENTID,
1485 	WMI_10X_START_EVENTID = 0x9000,
1486 	WMI_10X_END_EVENTID = 0x9FFF,
1487 
1488 	/* Scan specific events */
1489 	WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
1490 	WMI_10X_ECHO_EVENTID,
1491 	WMI_10X_DEBUG_MESG_EVENTID,
1492 	WMI_10X_UPDATE_STATS_EVENTID,
1493 
1494 	/* Instantaneous RSSI event */
1495 	WMI_10X_INST_RSSI_STATS_EVENTID,
1496 
1497 	/* VDEV specific events */
1498 	WMI_10X_VDEV_START_RESP_EVENTID,
1499 	WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1500 	WMI_10X_VDEV_RESUME_REQ_EVENTID,
1501 	WMI_10X_VDEV_STOPPED_EVENTID,
1502 
1503 	/* peer  specific events */
1504 	WMI_10X_PEER_STA_KICKOUT_EVENTID,
1505 
1506 	/* beacon/mgmt specific events */
1507 	WMI_10X_HOST_SWBA_EVENTID,
1508 	WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1509 	WMI_10X_MGMT_RX_EVENTID,
1510 
1511 	/* Channel stats event */
1512 	WMI_10X_CHAN_INFO_EVENTID,
1513 
1514 	/* PHY Error specific WMI event */
1515 	WMI_10X_PHYERR_EVENTID,
1516 
1517 	/* Roam event to trigger roaming on host */
1518 	WMI_10X_ROAM_EVENTID,
1519 
1520 	/* matching AP found from list of profiles */
1521 	WMI_10X_PROFILE_MATCH,
1522 
1523 	/* debug print message used for tracing FW code while debugging */
1524 	WMI_10X_DEBUG_PRINT_EVENTID,
1525 	/* VI spoecific event */
1526 	WMI_10X_PDEV_QVIT_EVENTID,
1527 	/* FW code profile data in response to profile request */
1528 	WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1529 
1530 	/*RTT related event ID*/
1531 	WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1532 	WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1533 	WMI_10X_RTT_ERROR_REPORT_EVENTID,
1534 
1535 	WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1536 	WMI_10X_DCS_INTERFERENCE_EVENTID,
1537 
1538 	/* TPC config for the current operating channel */
1539 	WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1540 
1541 	WMI_10X_GPIO_INPUT_EVENTID,
1542 	WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
1543 };
1544 
1545 enum wmi_10_2_cmd_id {
1546 	WMI_10_2_START_CMDID = 0x9000,
1547 	WMI_10_2_END_CMDID = 0x9FFF,
1548 	WMI_10_2_INIT_CMDID,
1549 	WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
1550 	WMI_10_2_STOP_SCAN_CMDID,
1551 	WMI_10_2_SCAN_CHAN_LIST_CMDID,
1552 	WMI_10_2_ECHO_CMDID,
1553 	WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1554 	WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1555 	WMI_10_2_PDEV_SET_PARAM_CMDID,
1556 	WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1557 	WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1558 	WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1559 	WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1560 	WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1561 	WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1562 	WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1563 	WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1564 	WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1565 	WMI_10_2_VDEV_CREATE_CMDID,
1566 	WMI_10_2_VDEV_DELETE_CMDID,
1567 	WMI_10_2_VDEV_START_REQUEST_CMDID,
1568 	WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1569 	WMI_10_2_VDEV_UP_CMDID,
1570 	WMI_10_2_VDEV_STOP_CMDID,
1571 	WMI_10_2_VDEV_DOWN_CMDID,
1572 	WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1573 	WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1574 	WMI_10_2_VDEV_SET_PARAM_CMDID,
1575 	WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1576 	WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1577 	WMI_10_2_PEER_CREATE_CMDID,
1578 	WMI_10_2_PEER_DELETE_CMDID,
1579 	WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1580 	WMI_10_2_PEER_SET_PARAM_CMDID,
1581 	WMI_10_2_PEER_ASSOC_CMDID,
1582 	WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1583 	WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1584 	WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1585 	WMI_10_2_PEER_MCAST_GROUP_CMDID,
1586 	WMI_10_2_BCN_TX_CMDID,
1587 	WMI_10_2_BCN_PRB_TMPL_CMDID,
1588 	WMI_10_2_BCN_FILTER_RX_CMDID,
1589 	WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1590 	WMI_10_2_MGMT_TX_CMDID,
1591 	WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1592 	WMI_10_2_ADDBA_SEND_CMDID,
1593 	WMI_10_2_ADDBA_STATUS_CMDID,
1594 	WMI_10_2_DELBA_SEND_CMDID,
1595 	WMI_10_2_ADDBA_SET_RESP_CMDID,
1596 	WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1597 	WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1598 	WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1599 	WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1600 	WMI_10_2_DBGLOG_CFG_CMDID,
1601 	WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1602 	WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1603 	WMI_10_2_PDEV_QVIT_CMDID,
1604 	WMI_10_2_ROAM_SCAN_MODE,
1605 	WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1606 	WMI_10_2_ROAM_SCAN_PERIOD,
1607 	WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1608 	WMI_10_2_ROAM_AP_PROFILE,
1609 	WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1610 	WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1611 	WMI_10_2_OFL_SCAN_PERIOD,
1612 	WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1613 	WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1614 	WMI_10_2_P2P_GO_SET_BEACON_IE,
1615 	WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1616 	WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1617 	WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1618 	WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1619 	WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1620 	WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1621 	WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1622 	WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1623 	WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1624 	WMI_10_2_PDEV_SUSPEND_CMDID,
1625 	WMI_10_2_PDEV_RESUME_CMDID,
1626 	WMI_10_2_ADD_BCN_FILTER_CMDID,
1627 	WMI_10_2_RMV_BCN_FILTER_CMDID,
1628 	WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1629 	WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1630 	WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1631 	WMI_10_2_WOW_ENABLE_CMDID,
1632 	WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1633 	WMI_10_2_RTT_MEASREQ_CMDID,
1634 	WMI_10_2_RTT_TSF_CMDID,
1635 	WMI_10_2_RTT_KEEPALIVE_CMDID,
1636 	WMI_10_2_PDEV_SEND_BCN_CMDID,
1637 	WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1638 	WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1639 	WMI_10_2_REQUEST_STATS_CMDID,
1640 	WMI_10_2_GPIO_CONFIG_CMDID,
1641 	WMI_10_2_GPIO_OUTPUT_CMDID,
1642 	WMI_10_2_VDEV_RATEMASK_CMDID,
1643 	WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1644 	WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1645 	WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1646 	WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1647 	WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1648 	WMI_10_2_FORCE_FW_HANG_CMDID,
1649 	WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1650 	WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1651 	WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1652 	WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1653 	WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1654 	WMI_10_2_PDEV_GET_INFO,
1655 	WMI_10_2_VDEV_GET_INFO,
1656 	WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1657 	WMI_10_2_PEER_ATF_REQUEST_CMDID,
1658 	WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1659 	WMI_10_2_MU_CAL_START_CMDID,
1660 	WMI_10_2_SET_LTEU_CONFIG_CMDID,
1661 	WMI_10_2_SET_CCA_PARAMS,
1662 	WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1663 	WMI_10_2_FWTEST_CMDID,
1664 	WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID,
1665 	WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
1666 };
1667 
1668 enum wmi_10_2_event_id {
1669 	WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
1670 	WMI_10_2_READY_EVENTID,
1671 	WMI_10_2_DEBUG_MESG_EVENTID,
1672 	WMI_10_2_START_EVENTID = 0x9000,
1673 	WMI_10_2_END_EVENTID = 0x9FFF,
1674 	WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
1675 	WMI_10_2_ECHO_EVENTID,
1676 	WMI_10_2_UPDATE_STATS_EVENTID,
1677 	WMI_10_2_INST_RSSI_STATS_EVENTID,
1678 	WMI_10_2_VDEV_START_RESP_EVENTID,
1679 	WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1680 	WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1681 	WMI_10_2_VDEV_STOPPED_EVENTID,
1682 	WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1683 	WMI_10_2_HOST_SWBA_EVENTID,
1684 	WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1685 	WMI_10_2_MGMT_RX_EVENTID,
1686 	WMI_10_2_CHAN_INFO_EVENTID,
1687 	WMI_10_2_PHYERR_EVENTID,
1688 	WMI_10_2_ROAM_EVENTID,
1689 	WMI_10_2_PROFILE_MATCH,
1690 	WMI_10_2_DEBUG_PRINT_EVENTID,
1691 	WMI_10_2_PDEV_QVIT_EVENTID,
1692 	WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1693 	WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1694 	WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1695 	WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1696 	WMI_10_2_RTT_KEEPALIVE_EVENTID,
1697 	WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1698 	WMI_10_2_DCS_INTERFERENCE_EVENTID,
1699 	WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1700 	WMI_10_2_GPIO_INPUT_EVENTID,
1701 	WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1702 	WMI_10_2_GENERIC_BUFFER_EVENTID,
1703 	WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1704 	WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1705 	WMI_10_2_WDS_PEER_EVENTID,
1706 	WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1707 	WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1708 	WMI_10_2_MU_REPORT_EVENTID,
1709 	WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
1710 	WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
1711 };
1712 
1713 enum wmi_10_4_cmd_id {
1714 	WMI_10_4_START_CMDID = 0x9000,
1715 	WMI_10_4_END_CMDID = 0x9FFF,
1716 	WMI_10_4_INIT_CMDID,
1717 	WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
1718 	WMI_10_4_STOP_SCAN_CMDID,
1719 	WMI_10_4_SCAN_CHAN_LIST_CMDID,
1720 	WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1721 	WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1722 	WMI_10_4_ECHO_CMDID,
1723 	WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1724 	WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1725 	WMI_10_4_PDEV_SET_PARAM_CMDID,
1726 	WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1727 	WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1728 	WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1729 	WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1730 	WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1731 	WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1732 	WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1733 	WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1734 	WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1735 	WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1736 	WMI_10_4_VDEV_CREATE_CMDID,
1737 	WMI_10_4_VDEV_DELETE_CMDID,
1738 	WMI_10_4_VDEV_START_REQUEST_CMDID,
1739 	WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1740 	WMI_10_4_VDEV_UP_CMDID,
1741 	WMI_10_4_VDEV_STOP_CMDID,
1742 	WMI_10_4_VDEV_DOWN_CMDID,
1743 	WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1744 	WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1745 	WMI_10_4_VDEV_SET_PARAM_CMDID,
1746 	WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1747 	WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1748 	WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1749 	WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1750 	WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1751 	WMI_10_4_PEER_CREATE_CMDID,
1752 	WMI_10_4_PEER_DELETE_CMDID,
1753 	WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1754 	WMI_10_4_PEER_SET_PARAM_CMDID,
1755 	WMI_10_4_PEER_ASSOC_CMDID,
1756 	WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1757 	WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1758 	WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1759 	WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1760 	WMI_10_4_PEER_MCAST_GROUP_CMDID,
1761 	WMI_10_4_BCN_TX_CMDID,
1762 	WMI_10_4_PDEV_SEND_BCN_CMDID,
1763 	WMI_10_4_BCN_PRB_TMPL_CMDID,
1764 	WMI_10_4_BCN_FILTER_RX_CMDID,
1765 	WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1766 	WMI_10_4_MGMT_TX_CMDID,
1767 	WMI_10_4_PRB_TMPL_CMDID,
1768 	WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1769 	WMI_10_4_ADDBA_SEND_CMDID,
1770 	WMI_10_4_ADDBA_STATUS_CMDID,
1771 	WMI_10_4_DELBA_SEND_CMDID,
1772 	WMI_10_4_ADDBA_SET_RESP_CMDID,
1773 	WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1774 	WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1775 	WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1776 	WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1777 	WMI_10_4_DBGLOG_CFG_CMDID,
1778 	WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1779 	WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1780 	WMI_10_4_PDEV_QVIT_CMDID,
1781 	WMI_10_4_ROAM_SCAN_MODE,
1782 	WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1783 	WMI_10_4_ROAM_SCAN_PERIOD,
1784 	WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1785 	WMI_10_4_ROAM_AP_PROFILE,
1786 	WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1787 	WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1788 	WMI_10_4_OFL_SCAN_PERIOD,
1789 	WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1790 	WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1791 	WMI_10_4_P2P_GO_SET_BEACON_IE,
1792 	WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1793 	WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1794 	WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1795 	WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1796 	WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1797 	WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1798 	WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1799 	WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1800 	WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1801 	WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1802 	WMI_10_4_PDEV_SUSPEND_CMDID,
1803 	WMI_10_4_PDEV_RESUME_CMDID,
1804 	WMI_10_4_ADD_BCN_FILTER_CMDID,
1805 	WMI_10_4_RMV_BCN_FILTER_CMDID,
1806 	WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1807 	WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1808 	WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1809 	WMI_10_4_WOW_ENABLE_CMDID,
1810 	WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1811 	WMI_10_4_RTT_MEASREQ_CMDID,
1812 	WMI_10_4_RTT_TSF_CMDID,
1813 	WMI_10_4_RTT_KEEPALIVE_CMDID,
1814 	WMI_10_4_OEM_REQ_CMDID,
1815 	WMI_10_4_NAN_CMDID,
1816 	WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1817 	WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1818 	WMI_10_4_REQUEST_STATS_CMDID,
1819 	WMI_10_4_GPIO_CONFIG_CMDID,
1820 	WMI_10_4_GPIO_OUTPUT_CMDID,
1821 	WMI_10_4_VDEV_RATEMASK_CMDID,
1822 	WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1823 	WMI_10_4_GTK_OFFLOAD_CMDID,
1824 	WMI_10_4_QBOOST_CFG_CMDID,
1825 	WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1826 	WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1827 	WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1828 	WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1829 	WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1830 	WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1831 	WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1832 	WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1833 	WMI_10_4_FORCE_FW_HANG_CMDID,
1834 	WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1835 	WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1836 	WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1837 	WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1838 	WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1839 	WMI_10_4_PDEV_FIPS_CMDID,
1840 	WMI_10_4_TT_SET_CONF_CMDID,
1841 	WMI_10_4_FWTEST_CMDID,
1842 	WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1843 	WMI_10_4_PEER_ATF_REQUEST_CMDID,
1844 	WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1845 	WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1846 	WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1847 	WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1848 	WMI_10_4_PDEV_GET_TPC_CMDID,
1849 	WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1850 	WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1851 	WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1852 	WMI_10_4_PDEV_GET_INFO_CMDID,
1853 	WMI_10_4_VDEV_GET_INFO_CMDID,
1854 	WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1855 	WMI_10_4_MU_CAL_START_CMDID,
1856 	WMI_10_4_SET_CCA_PARAMS_CMDID,
1857 	WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1858 	WMI_10_4_EXT_RESOURCE_CFG_CMDID,
1859 	WMI_10_4_VDEV_SET_IE_CMDID,
1860 	WMI_10_4_SET_LTEU_CONFIG_CMDID,
1861 	WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
1862 	WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
1863 	WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
1864 	WMI_10_4_PEER_BWF_REQUEST_CMDID,
1865 	WMI_10_4_BTCOEX_CFG_CMDID,
1866 	WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID,
1867 	WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID,
1868 	WMI_10_4_PEER_GID_USERPOS_LIST_CMDID,
1869 	WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID,
1870 	WMI_10_4_COEX_VERSION_CFG_CMID,
1871 	WMI_10_4_PDEV_GET_RX_FILTER_CMDID,
1872 	WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID,
1873 	WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID,
1874 	WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID,
1875 	WMI_10_4_CONFIG_SMART_LOGGING_CMDID,
1876 	WMI_10_4_DEBUG_FATAL_CONDITION_CMDID,
1877 	WMI_10_4_GET_TSF_TIMER_CMDID,
1878 	WMI_10_4_PDEV_GET_TPC_TABLE_CMDID,
1879 	WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID,
1880 	WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID,
1881 	WMI_10_4_TDLS_SET_STATE_CMDID,
1882 	WMI_10_4_TDLS_PEER_UPDATE_CMDID,
1883 	WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
1884 	WMI_10_4_PDEV_SEND_FD_CMDID,
1885 	WMI_10_4_ENABLE_FILS_CMDID,
1886 	WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
1887 	WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
1888 	WMI_10_4_RADAR_FOUND_CMDID,
1889 	WMI_10_4_PEER_CFR_CAPTURE_CMDID,
1890 	WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
1891 	WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
1892 };
1893 
1894 enum wmi_10_4_event_id {
1895 	WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
1896 	WMI_10_4_READY_EVENTID,
1897 	WMI_10_4_DEBUG_MESG_EVENTID,
1898 	WMI_10_4_START_EVENTID = 0x9000,
1899 	WMI_10_4_END_EVENTID = 0x9FFF,
1900 	WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
1901 	WMI_10_4_ECHO_EVENTID,
1902 	WMI_10_4_UPDATE_STATS_EVENTID,
1903 	WMI_10_4_INST_RSSI_STATS_EVENTID,
1904 	WMI_10_4_VDEV_START_RESP_EVENTID,
1905 	WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1906 	WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1907 	WMI_10_4_VDEV_STOPPED_EVENTID,
1908 	WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1909 	WMI_10_4_HOST_SWBA_EVENTID,
1910 	WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1911 	WMI_10_4_MGMT_RX_EVENTID,
1912 	WMI_10_4_CHAN_INFO_EVENTID,
1913 	WMI_10_4_PHYERR_EVENTID,
1914 	WMI_10_4_ROAM_EVENTID,
1915 	WMI_10_4_PROFILE_MATCH,
1916 	WMI_10_4_DEBUG_PRINT_EVENTID,
1917 	WMI_10_4_PDEV_QVIT_EVENTID,
1918 	WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1919 	WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1920 	WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1921 	WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1922 	WMI_10_4_RTT_KEEPALIVE_EVENTID,
1923 	WMI_10_4_OEM_CAPABILITY_EVENTID,
1924 	WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1925 	WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1926 	WMI_10_4_NAN_EVENTID,
1927 	WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1928 	WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1929 	WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1930 	WMI_10_4_DCS_INTERFERENCE_EVENTID,
1931 	WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1932 	WMI_10_4_CSA_HANDLING_EVENTID,
1933 	WMI_10_4_GPIO_INPUT_EVENTID,
1934 	WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1935 	WMI_10_4_GENERIC_BUFFER_EVENTID,
1936 	WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1937 	WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1938 	WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1939 	WMI_10_4_WDS_PEER_EVENTID,
1940 	WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1941 	WMI_10_4_PDEV_FIPS_EVENTID,
1942 	WMI_10_4_TT_STATS_EVENTID,
1943 	WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1944 	WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1945 	WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1946 	WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1947 	WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1948 	WMI_10_4_PDEV_TPC_EVENTID,
1949 	WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1950 	WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1951 	WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1952 	WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1953 	WMI_10_4_MU_REPORT_EVENTID,
1954 	WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID,
1955 	WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID,
1956 	WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID,
1957 	WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID,
1958 	WMI_10_4_ATF_PEER_STATS_EVENTID,
1959 	WMI_10_4_PDEV_GET_RX_FILTER_EVENTID,
1960 	WMI_10_4_NAC_RSSI_EVENTID,
1961 	WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID,
1962 	WMI_10_4_GET_TSF_TIMER_RESP_EVENTID,
1963 	WMI_10_4_PDEV_TPC_TABLE_EVENTID,
1964 	WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID,
1965 	WMI_10_4_TDLS_PEER_EVENTID,
1966 	WMI_10_4_HOST_SWFDA_EVENTID,
1967 	WMI_10_4_ESP_ESTIMATE_EVENTID,
1968 	WMI_10_4_DFS_STATUS_CHECK_EVENTID,
1969 	WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
1970 };
1971 
1972 enum wmi_phy_mode {
1973 	MODE_11A        = 0,   /* 11a Mode */
1974 	MODE_11G        = 1,   /* 11b/g Mode */
1975 	MODE_11B        = 2,   /* 11b Mode */
1976 	MODE_11GONLY    = 3,   /* 11g only Mode */
1977 	MODE_11NA_HT20   = 4,  /* 11a HT20 mode */
1978 	MODE_11NG_HT20   = 5,  /* 11g HT20 mode */
1979 	MODE_11NA_HT40   = 6,  /* 11a HT40 mode */
1980 	MODE_11NG_HT40   = 7,  /* 11g HT40 mode */
1981 	MODE_11AC_VHT20 = 8,
1982 	MODE_11AC_VHT40 = 9,
1983 	MODE_11AC_VHT80 = 10,
1984 	/*    MODE_11AC_VHT160 = 11, */
1985 	MODE_11AC_VHT20_2G = 11,
1986 	MODE_11AC_VHT40_2G = 12,
1987 	MODE_11AC_VHT80_2G = 13,
1988 	MODE_11AC_VHT80_80 = 14,
1989 	MODE_11AC_VHT160 = 15,
1990 	MODE_UNKNOWN    = 16,
1991 	MODE_MAX        = 16
1992 };
1993 
ath10k_wmi_phymode_str(enum wmi_phy_mode mode)1994 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
1995 {
1996 	switch (mode) {
1997 	case MODE_11A:
1998 		return "11a";
1999 	case MODE_11G:
2000 		return "11g";
2001 	case MODE_11B:
2002 		return "11b";
2003 	case MODE_11GONLY:
2004 		return "11gonly";
2005 	case MODE_11NA_HT20:
2006 		return "11na-ht20";
2007 	case MODE_11NG_HT20:
2008 		return "11ng-ht20";
2009 	case MODE_11NA_HT40:
2010 		return "11na-ht40";
2011 	case MODE_11NG_HT40:
2012 		return "11ng-ht40";
2013 	case MODE_11AC_VHT20:
2014 		return "11ac-vht20";
2015 	case MODE_11AC_VHT40:
2016 		return "11ac-vht40";
2017 	case MODE_11AC_VHT80:
2018 		return "11ac-vht80";
2019 	case MODE_11AC_VHT160:
2020 		return "11ac-vht160";
2021 	case MODE_11AC_VHT80_80:
2022 		return "11ac-vht80+80";
2023 	case MODE_11AC_VHT20_2G:
2024 		return "11ac-vht20-2g";
2025 	case MODE_11AC_VHT40_2G:
2026 		return "11ac-vht40-2g";
2027 	case MODE_11AC_VHT80_2G:
2028 		return "11ac-vht80-2g";
2029 	case MODE_UNKNOWN:
2030 		/* skip */
2031 		break;
2032 
2033 		/* no default handler to allow compiler to check that the
2034 		 * enum is fully handled
2035 		 */
2036 	}
2037 
2038 	return "<unknown>";
2039 }
2040 
2041 #define WMI_CHAN_LIST_TAG	0x1
2042 #define WMI_SSID_LIST_TAG	0x2
2043 #define WMI_BSSID_LIST_TAG	0x3
2044 #define WMI_IE_TAG		0x4
2045 
2046 struct wmi_channel {
2047 	__le32 mhz;
2048 	__le32 band_center_freq1;
2049 	__le32 band_center_freq2; /* valid for 11ac, 80plus80 */
2050 	union {
2051 		__le32 flags; /* WMI_CHAN_FLAG_ */
2052 		struct {
2053 			u8 mode; /* only 6 LSBs */
2054 		} __packed;
2055 	} __packed;
2056 	union {
2057 		__le32 reginfo0;
2058 		struct {
2059 			/* note: power unit is 0.5 dBm */
2060 			u8 min_power;
2061 			u8 max_power;
2062 			u8 reg_power;
2063 			u8 reg_classid;
2064 		} __packed;
2065 	} __packed;
2066 	union {
2067 		__le32 reginfo1;
2068 		struct {
2069 			/* note: power unit is 1 dBm */
2070 			u8 antenna_max;
2071 			/* note: power unit is 0.5 dBm */
2072 			u8 max_tx_power;
2073 		} __packed;
2074 	} __packed;
2075 } __packed;
2076 
2077 struct wmi_channel_arg {
2078 	u32 freq;
2079 	u32 band_center_freq1;
2080 	u32 band_center_freq2;
2081 	bool passive;
2082 	bool allow_ibss;
2083 	bool allow_ht;
2084 	bool allow_vht;
2085 	bool ht40plus;
2086 	bool chan_radar;
2087 	/* note: power unit is 0.5 dBm */
2088 	u32 min_power;
2089 	u32 max_power;
2090 	u32 max_reg_power;
2091 	/* note: power unit is 1 dBm */
2092 	u32 max_antenna_gain;
2093 	u32 reg_class_id;
2094 	enum wmi_phy_mode mode;
2095 };
2096 
2097 enum wmi_channel_change_cause {
2098 	WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
2099 	WMI_CHANNEL_CHANGE_CAUSE_CSA,
2100 };
2101 
2102 #define WMI_CHAN_FLAG_HT40_PLUS      (1 << 6)
2103 #define WMI_CHAN_FLAG_PASSIVE        (1 << 7)
2104 #define WMI_CHAN_FLAG_ADHOC_ALLOWED  (1 << 8)
2105 #define WMI_CHAN_FLAG_AP_DISABLED    (1 << 9)
2106 #define WMI_CHAN_FLAG_DFS            (1 << 10)
2107 #define WMI_CHAN_FLAG_ALLOW_HT       (1 << 11)
2108 #define WMI_CHAN_FLAG_ALLOW_VHT      (1 << 12)
2109 
2110 /* Indicate reason for channel switch */
2111 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
2112 /* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/
2113 #define WMI_CHAN_FLAG_DFS_CFREQ2  (1 << 15)
2114 #define WMI_MAX_SPATIAL_STREAM        3 /* default max ss */
2115 
2116 /* HT Capabilities*/
2117 #define WMI_HT_CAP_ENABLED                0x0001   /* HT Enabled/ disabled */
2118 #define WMI_HT_CAP_HT20_SGI       0x0002   /* Short Guard Interval with HT20 */
2119 #define WMI_HT_CAP_DYNAMIC_SMPS           0x0004   /* Dynamic MIMO powersave */
2120 #define WMI_HT_CAP_TX_STBC                0x0008   /* B3 TX STBC */
2121 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT     3
2122 #define WMI_HT_CAP_RX_STBC                0x0030   /* B4-B5 RX STBC */
2123 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT     4
2124 #define WMI_HT_CAP_LDPC                   0x0040   /* LDPC supported */
2125 #define WMI_HT_CAP_L_SIG_TXOP_PROT        0x0080   /* L-SIG TXOP Protection */
2126 #define WMI_HT_CAP_MPDU_DENSITY           0x0700   /* MPDU Density */
2127 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
2128 #define WMI_HT_CAP_HT40_SGI               0x0800
2129 #define WMI_HT_CAP_RX_LDPC                0x1000   /* LDPC RX support */
2130 #define WMI_HT_CAP_TX_LDPC                0x2000   /* LDPC TX support */
2131 
2132 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED       | \
2133 				WMI_HT_CAP_HT20_SGI      | \
2134 				WMI_HT_CAP_HT40_SGI      | \
2135 				WMI_HT_CAP_TX_STBC       | \
2136 				WMI_HT_CAP_RX_STBC       | \
2137 				WMI_HT_CAP_LDPC)
2138 
2139 /*
2140  * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
2141  * field. The fields not defined here are not supported, or reserved.
2142  * Do not change these masks and if you have to add new one follow the
2143  * bitmask as specified by 802.11ac draft.
2144  */
2145 
2146 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK            0x00000003
2147 #define WMI_VHT_CAP_RX_LDPC                      0x00000010
2148 #define WMI_VHT_CAP_SGI_80MHZ                    0x00000020
2149 #define WMI_VHT_CAP_SGI_160MHZ                   0x00000040
2150 #define WMI_VHT_CAP_TX_STBC                      0x00000080
2151 #define WMI_VHT_CAP_RX_STBC_MASK                 0x00000300
2152 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT           8
2153 #define WMI_VHT_CAP_SU_BFER                      0x00000800
2154 #define WMI_VHT_CAP_SU_BFEE                      0x00001000
2155 #define WMI_VHT_CAP_MAX_CS_ANT_MASK              0x0000E000
2156 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT        13
2157 #define WMI_VHT_CAP_MAX_SND_DIM_MASK             0x00070000
2158 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT       16
2159 #define WMI_VHT_CAP_MU_BFER                      0x00080000
2160 #define WMI_VHT_CAP_MU_BFEE                      0x00100000
2161 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP            0x03800000
2162 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT      23
2163 #define WMI_VHT_CAP_RX_FIXED_ANT                 0x10000000
2164 #define WMI_VHT_CAP_TX_FIXED_ANT                 0x20000000
2165 
2166 /* The following also refer for max HT AMSDU */
2167 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839            0x00000000
2168 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935            0x00000001
2169 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454           0x00000002
2170 
2171 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \
2172 				 WMI_VHT_CAP_RX_LDPC             | \
2173 				 WMI_VHT_CAP_SGI_80MHZ           | \
2174 				 WMI_VHT_CAP_TX_STBC             | \
2175 				 WMI_VHT_CAP_RX_STBC_MASK        | \
2176 				 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   | \
2177 				 WMI_VHT_CAP_RX_FIXED_ANT        | \
2178 				 WMI_VHT_CAP_TX_FIXED_ANT)
2179 
2180 /*
2181  * Interested readers refer to Rx/Tx MCS Map definition as defined in
2182  * 802.11ac
2183  */
2184 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss)      ((3 & (r)) << (((ss) - 1) << 1))
2185 #define WMI_VHT_MAX_SUPP_RATE_MASK           0x1fff0000
2186 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT     16
2187 
2188 enum {
2189 	REGDMN_MODE_11A              = 0x00001, /* 11a channels */
2190 	REGDMN_MODE_TURBO            = 0x00002, /* 11a turbo-only channels */
2191 	REGDMN_MODE_11B              = 0x00004, /* 11b channels */
2192 	REGDMN_MODE_PUREG            = 0x00008, /* 11g channels (OFDM only) */
2193 	REGDMN_MODE_11G              = 0x00008, /* XXX historical */
2194 	REGDMN_MODE_108G             = 0x00020, /* 11a+Turbo channels */
2195 	REGDMN_MODE_108A             = 0x00040, /* 11g+Turbo channels */
2196 	REGDMN_MODE_XR               = 0x00100, /* XR channels */
2197 	REGDMN_MODE_11A_HALF_RATE    = 0x00200, /* 11A half rate channels */
2198 	REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
2199 	REGDMN_MODE_11NG_HT20        = 0x00800, /* 11N-G HT20 channels */
2200 	REGDMN_MODE_11NA_HT20        = 0x01000, /* 11N-A HT20 channels */
2201 	REGDMN_MODE_11NG_HT40PLUS    = 0x02000, /* 11N-G HT40 + channels */
2202 	REGDMN_MODE_11NG_HT40MINUS   = 0x04000, /* 11N-G HT40 - channels */
2203 	REGDMN_MODE_11NA_HT40PLUS    = 0x08000, /* 11N-A HT40 + channels */
2204 	REGDMN_MODE_11NA_HT40MINUS   = 0x10000, /* 11N-A HT40 - channels */
2205 	REGDMN_MODE_11AC_VHT20       = 0x20000, /* 5Ghz, VHT20 */
2206 	REGDMN_MODE_11AC_VHT40PLUS   = 0x40000, /* 5Ghz, VHT40 + channels */
2207 	REGDMN_MODE_11AC_VHT40MINUS  = 0x80000, /* 5Ghz  VHT40 - channels */
2208 	REGDMN_MODE_11AC_VHT80       = 0x100000, /* 5Ghz, VHT80 channels */
2209 	REGDMN_MODE_11AC_VHT160      = 0x200000,     /* 5Ghz, VHT160 channels */
2210 	REGDMN_MODE_11AC_VHT80_80    = 0x400000,     /* 5Ghz, VHT80+80 channels */
2211 	REGDMN_MODE_ALL              = 0xffffffff
2212 };
2213 
2214 #define REGDMN_CAP1_CHAN_HALF_RATE        0x00000001
2215 #define REGDMN_CAP1_CHAN_QUARTER_RATE     0x00000002
2216 #define REGDMN_CAP1_CHAN_HAL49GHZ         0x00000004
2217 
2218 /* regulatory capabilities */
2219 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND   0x0040
2220 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN    0x0080
2221 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2         0x0100
2222 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND    0x0200
2223 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD     0x0400
2224 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A    0x0800
2225 
2226 struct hal_reg_capabilities {
2227 	/* regdomain value specified in EEPROM */
2228 	__le32 eeprom_rd;
2229 	/*regdomain */
2230 	__le32 eeprom_rd_ext;
2231 	/* CAP1 capabilities bit map. */
2232 	__le32 regcap1;
2233 	/* REGDMN EEPROM CAP. */
2234 	__le32 regcap2;
2235 	/* REGDMN MODE */
2236 	__le32 wireless_modes;
2237 	__le32 low_2ghz_chan;
2238 	__le32 high_2ghz_chan;
2239 	__le32 low_5ghz_chan;
2240 	__le32 high_5ghz_chan;
2241 } __packed;
2242 
2243 enum wlan_mode_capability {
2244 	WHAL_WLAN_11A_CAPABILITY   = 0x1,
2245 	WHAL_WLAN_11G_CAPABILITY   = 0x2,
2246 	WHAL_WLAN_11AG_CAPABILITY  = 0x3,
2247 };
2248 
2249 /* structure used by FW for requesting host memory */
2250 struct wlan_host_mem_req {
2251 	/* ID of the request */
2252 	__le32 req_id;
2253 	/* size of the  of each unit */
2254 	__le32 unit_size;
2255 	/* flags to  indicate that
2256 	 * the number units is dependent
2257 	 * on number of resources(num vdevs num peers .. etc)
2258 	 */
2259 	__le32 num_unit_info;
2260 	/*
2261 	 * actual number of units to allocate . if flags in the num_unit_info
2262 	 * indicate that number of units is tied to number of a particular
2263 	 * resource to allocate then  num_units filed is set to 0 and host
2264 	 * will derive the number units from number of the resources it is
2265 	 * requesting.
2266 	 */
2267 	__le32 num_units;
2268 } __packed;
2269 
2270 /*
2271  * The following struct holds optional payload for
2272  * wmi_service_ready_event,e.g., 11ac pass some of the
2273  * device capability to the host.
2274  */
2275 struct wmi_service_ready_event {
2276 	__le32 sw_version;
2277 	__le32 sw_version_1;
2278 	__le32 abi_version;
2279 	/* WMI_PHY_CAPABILITY */
2280 	__le32 phy_capability;
2281 	/* Maximum number of frag table entries that SW will populate less 1 */
2282 	__le32 max_frag_entry;
2283 	__le32 wmi_service_bitmap[16];
2284 	__le32 num_rf_chains;
2285 	/*
2286 	 * The following field is only valid for service type
2287 	 * WMI_SERVICE_11AC
2288 	 */
2289 	__le32 ht_cap_info; /* WMI HT Capability */
2290 	__le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2291 	__le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2292 	__le32 hw_min_tx_power;
2293 	__le32 hw_max_tx_power;
2294 	struct hal_reg_capabilities hal_reg_capabilities;
2295 	__le32 sys_cap_info;
2296 	__le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2297 	/*
2298 	 * Max beacon and Probe Response IE offload size
2299 	 * (includes optional P2P IEs)
2300 	 */
2301 	__le32 max_bcn_ie_size;
2302 	/*
2303 	 * request to host to allocate a chuck of memory and pss it down to FW
2304 	 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2305 	 * data structures. Only valid for low latency interfaces like PCIE
2306 	 * where FW can access this memory directly (or) by DMA.
2307 	 */
2308 	__le32 num_mem_reqs;
2309 	struct wlan_host_mem_req mem_reqs[];
2310 } __packed;
2311 
2312 /* This is the definition from 10.X firmware branch */
2313 struct wmi_10x_service_ready_event {
2314 	__le32 sw_version;
2315 	__le32 abi_version;
2316 
2317 	/* WMI_PHY_CAPABILITY */
2318 	__le32 phy_capability;
2319 
2320 	/* Maximum number of frag table entries that SW will populate less 1 */
2321 	__le32 max_frag_entry;
2322 	__le32 wmi_service_bitmap[16];
2323 	__le32 num_rf_chains;
2324 
2325 	/*
2326 	 * The following field is only valid for service type
2327 	 * WMI_SERVICE_11AC
2328 	 */
2329 	__le32 ht_cap_info; /* WMI HT Capability */
2330 	__le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2331 	__le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2332 	__le32 hw_min_tx_power;
2333 	__le32 hw_max_tx_power;
2334 
2335 	struct hal_reg_capabilities hal_reg_capabilities;
2336 
2337 	__le32 sys_cap_info;
2338 	__le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2339 
2340 	/*
2341 	 * request to host to allocate a chuck of memory and pss it down to FW
2342 	 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2343 	 * data structures. Only valid for low latency interfaces like PCIE
2344 	 * where FW can access this memory directly (or) by DMA.
2345 	 */
2346 	__le32 num_mem_reqs;
2347 
2348 	struct wlan_host_mem_req mem_reqs[];
2349 } __packed;
2350 
2351 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
2352 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)
2353 
2354 struct wmi_ready_event {
2355 	__le32 sw_version;
2356 	__le32 abi_version;
2357 	struct wmi_mac_addr mac_addr;
2358 	__le32 status;
2359 } __packed;
2360 
2361 struct wmi_resource_config {
2362 	/* number of virtual devices (VAPs) to support */
2363 	__le32 num_vdevs;
2364 
2365 	/* number of peer nodes to support */
2366 	__le32 num_peers;
2367 
2368 	/*
2369 	 * In offload mode target supports features like WOW, chatter and
2370 	 * other protocol offloads. In order to support them some
2371 	 * functionalities like reorder buffering, PN checking need to be
2372 	 * done in target. This determines maximum number of peers supported
2373 	 * by target in offload mode
2374 	 */
2375 	__le32 num_offload_peers;
2376 
2377 	/* For target-based RX reordering */
2378 	__le32 num_offload_reorder_bufs;
2379 
2380 	/* number of keys per peer */
2381 	__le32 num_peer_keys;
2382 
2383 	/* total number of TX/RX data TIDs */
2384 	__le32 num_tids;
2385 
2386 	/*
2387 	 * max skid for resolving hash collisions
2388 	 *
2389 	 *   The address search table is sparse, so that if two MAC addresses
2390 	 *   result in the same hash value, the second of these conflicting
2391 	 *   entries can slide to the next index in the address search table,
2392 	 *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2393 	 *   specifies the upper bound on how many subsequent indices to search
2394 	 *   over to find an unoccupied space.
2395 	 */
2396 	__le32 ast_skid_limit;
2397 
2398 	/*
2399 	 * the nominal chain mask for transmit
2400 	 *
2401 	 *   The chain mask may be modified dynamically, e.g. to operate AP
2402 	 *   tx with a reduced number of chains if no clients are associated.
2403 	 *   This configuration parameter specifies the nominal chain-mask that
2404 	 *   should be used when not operating with a reduced set of tx chains.
2405 	 */
2406 	__le32 tx_chain_mask;
2407 
2408 	/*
2409 	 * the nominal chain mask for receive
2410 	 *
2411 	 *   The chain mask may be modified dynamically, e.g. for a client
2412 	 *   to use a reduced number of chains for receive if the traffic to
2413 	 *   the client is low enough that it doesn't require downlink MIMO
2414 	 *   or antenna diversity.
2415 	 *   This configuration parameter specifies the nominal chain-mask that
2416 	 *   should be used when not operating with a reduced set of rx chains.
2417 	 */
2418 	__le32 rx_chain_mask;
2419 
2420 	/*
2421 	 * what rx reorder timeout (ms) to use for the AC
2422 	 *
2423 	 *   Each WMM access class (voice, video, best-effort, background) will
2424 	 *   have its own timeout value to dictate how long to wait for missing
2425 	 *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2426 	 *   already been received.
2427 	 *   This parameter specifies the timeout in milliseconds for each
2428 	 *   class.
2429 	 */
2430 	__le32 rx_timeout_pri_vi;
2431 	__le32 rx_timeout_pri_vo;
2432 	__le32 rx_timeout_pri_be;
2433 	__le32 rx_timeout_pri_bk;
2434 
2435 	/*
2436 	 * what mode the rx should decap packets to
2437 	 *
2438 	 *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2439 	 *   THis setting also determines the default TX behavior, however TX
2440 	 *   behavior can be modified on a per VAP basis during VAP init
2441 	 */
2442 	__le32 rx_decap_mode;
2443 
2444 	/* what is the maximum number of scan requests that can be queued */
2445 	__le32 scan_max_pending_reqs;
2446 
2447 	/* maximum VDEV that could use BMISS offload */
2448 	__le32 bmiss_offload_max_vdev;
2449 
2450 	/* maximum VDEV that could use offload roaming */
2451 	__le32 roam_offload_max_vdev;
2452 
2453 	/* maximum AP profiles that would push to offload roaming */
2454 	__le32 roam_offload_max_ap_profiles;
2455 
2456 	/*
2457 	 * how many groups to use for mcast->ucast conversion
2458 	 *
2459 	 *   The target's WAL maintains a table to hold information regarding
2460 	 *   which peers belong to a given multicast group, so that if
2461 	 *   multicast->unicast conversion is enabled, the target can convert
2462 	 *   multicast tx frames to a series of unicast tx frames, to each
2463 	 *   peer within the multicast group.
2464 	     This num_mcast_groups configuration parameter tells the target how
2465 	 *   many multicast groups to provide storage for within its multicast
2466 	 *   group membership table.
2467 	 */
2468 	__le32 num_mcast_groups;
2469 
2470 	/*
2471 	 * size to alloc for the mcast membership table
2472 	 *
2473 	 *   This num_mcast_table_elems configuration parameter tells the
2474 	 *   target how many peer elements it needs to provide storage for in
2475 	 *   its multicast group membership table.
2476 	 *   These multicast group membership table elements are shared by the
2477 	 *   multicast groups stored within the table.
2478 	 */
2479 	__le32 num_mcast_table_elems;
2480 
2481 	/*
2482 	 * whether/how to do multicast->unicast conversion
2483 	 *
2484 	 *   This configuration parameter specifies whether the target should
2485 	 *   perform multicast --> unicast conversion on transmit, and if so,
2486 	 *   what to do if it finds no entries in its multicast group
2487 	 *   membership table for the multicast IP address in the tx frame.
2488 	 *   Configuration value:
2489 	 *   0 -> Do not perform multicast to unicast conversion.
2490 	 *   1 -> Convert multicast frames to unicast, if the IP multicast
2491 	 *        address from the tx frame is found in the multicast group
2492 	 *        membership table.  If the IP multicast address is not found,
2493 	 *        drop the frame.
2494 	 *   2 -> Convert multicast frames to unicast, if the IP multicast
2495 	 *        address from the tx frame is found in the multicast group
2496 	 *        membership table.  If the IP multicast address is not found,
2497 	 *        transmit the frame as multicast.
2498 	 */
2499 	__le32 mcast2ucast_mode;
2500 
2501 	/*
2502 	 * how much memory to allocate for a tx PPDU dbg log
2503 	 *
2504 	 *   This parameter controls how much memory the target will allocate
2505 	 *   to store a log of tx PPDU meta-information (how large the PPDU
2506 	 *   was, when it was sent, whether it was successful, etc.)
2507 	 */
2508 	__le32 tx_dbg_log_size;
2509 
2510 	/* how many AST entries to be allocated for WDS */
2511 	__le32 num_wds_entries;
2512 
2513 	/*
2514 	 * MAC DMA burst size, e.g., For target PCI limit can be
2515 	 * 0 -default, 1 256B
2516 	 */
2517 	__le32 dma_burst_size;
2518 
2519 	/*
2520 	 * Fixed delimiters to be inserted after every MPDU to
2521 	 * account for interface latency to avoid underrun.
2522 	 */
2523 	__le32 mac_aggr_delim;
2524 
2525 	/*
2526 	 *   determine whether target is responsible for detecting duplicate
2527 	 *   non-aggregate MPDU and timing out stale fragments.
2528 	 *
2529 	 *   A-MPDU reordering is always performed on the target.
2530 	 *
2531 	 *   0: target responsible for frag timeout and dup checking
2532 	 *   1: host responsible for frag timeout and dup checking
2533 	 */
2534 	__le32 rx_skip_defrag_timeout_dup_detection_check;
2535 
2536 	/*
2537 	 * Configuration for VoW :
2538 	 * No of Video Nodes to be supported
2539 	 * and Max no of descriptors for each Video link (node).
2540 	 */
2541 	__le32 vow_config;
2542 
2543 	/* maximum VDEV that could use GTK offload */
2544 	__le32 gtk_offload_max_vdev;
2545 
2546 	/* Number of msdu descriptors target should use */
2547 	__le32 num_msdu_desc;
2548 
2549 	/*
2550 	 * Max. number of Tx fragments per MSDU
2551 	 *  This parameter controls the max number of Tx fragments per MSDU.
2552 	 *  This is sent by the target as part of the WMI_SERVICE_READY event
2553 	 *  and is overridden by the OS shim as required.
2554 	 */
2555 	__le32 max_frag_entries;
2556 } __packed;
2557 
2558 struct wmi_resource_config_10x {
2559 	/* number of virtual devices (VAPs) to support */
2560 	__le32 num_vdevs;
2561 
2562 	/* number of peer nodes to support */
2563 	__le32 num_peers;
2564 
2565 	/* number of keys per peer */
2566 	__le32 num_peer_keys;
2567 
2568 	/* total number of TX/RX data TIDs */
2569 	__le32 num_tids;
2570 
2571 	/*
2572 	 * max skid for resolving hash collisions
2573 	 *
2574 	 *   The address search table is sparse, so that if two MAC addresses
2575 	 *   result in the same hash value, the second of these conflicting
2576 	 *   entries can slide to the next index in the address search table,
2577 	 *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2578 	 *   specifies the upper bound on how many subsequent indices to search
2579 	 *   over to find an unoccupied space.
2580 	 */
2581 	__le32 ast_skid_limit;
2582 
2583 	/*
2584 	 * the nominal chain mask for transmit
2585 	 *
2586 	 *   The chain mask may be modified dynamically, e.g. to operate AP
2587 	 *   tx with a reduced number of chains if no clients are associated.
2588 	 *   This configuration parameter specifies the nominal chain-mask that
2589 	 *   should be used when not operating with a reduced set of tx chains.
2590 	 */
2591 	__le32 tx_chain_mask;
2592 
2593 	/*
2594 	 * the nominal chain mask for receive
2595 	 *
2596 	 *   The chain mask may be modified dynamically, e.g. for a client
2597 	 *   to use a reduced number of chains for receive if the traffic to
2598 	 *   the client is low enough that it doesn't require downlink MIMO
2599 	 *   or antenna diversity.
2600 	 *   This configuration parameter specifies the nominal chain-mask that
2601 	 *   should be used when not operating with a reduced set of rx chains.
2602 	 */
2603 	__le32 rx_chain_mask;
2604 
2605 	/*
2606 	 * what rx reorder timeout (ms) to use for the AC
2607 	 *
2608 	 *   Each WMM access class (voice, video, best-effort, background) will
2609 	 *   have its own timeout value to dictate how long to wait for missing
2610 	 *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2611 	 *   already been received.
2612 	 *   This parameter specifies the timeout in milliseconds for each
2613 	 *   class.
2614 	 */
2615 	__le32 rx_timeout_pri_vi;
2616 	__le32 rx_timeout_pri_vo;
2617 	__le32 rx_timeout_pri_be;
2618 	__le32 rx_timeout_pri_bk;
2619 
2620 	/*
2621 	 * what mode the rx should decap packets to
2622 	 *
2623 	 *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2624 	 *   THis setting also determines the default TX behavior, however TX
2625 	 *   behavior can be modified on a per VAP basis during VAP init
2626 	 */
2627 	__le32 rx_decap_mode;
2628 
2629 	/* what is the maximum number of scan requests that can be queued */
2630 	__le32 scan_max_pending_reqs;
2631 
2632 	/* maximum VDEV that could use BMISS offload */
2633 	__le32 bmiss_offload_max_vdev;
2634 
2635 	/* maximum VDEV that could use offload roaming */
2636 	__le32 roam_offload_max_vdev;
2637 
2638 	/* maximum AP profiles that would push to offload roaming */
2639 	__le32 roam_offload_max_ap_profiles;
2640 
2641 	/*
2642 	 * how many groups to use for mcast->ucast conversion
2643 	 *
2644 	 *   The target's WAL maintains a table to hold information regarding
2645 	 *   which peers belong to a given multicast group, so that if
2646 	 *   multicast->unicast conversion is enabled, the target can convert
2647 	 *   multicast tx frames to a series of unicast tx frames, to each
2648 	 *   peer within the multicast group.
2649 	     This num_mcast_groups configuration parameter tells the target how
2650 	 *   many multicast groups to provide storage for within its multicast
2651 	 *   group membership table.
2652 	 */
2653 	__le32 num_mcast_groups;
2654 
2655 	/*
2656 	 * size to alloc for the mcast membership table
2657 	 *
2658 	 *   This num_mcast_table_elems configuration parameter tells the
2659 	 *   target how many peer elements it needs to provide storage for in
2660 	 *   its multicast group membership table.
2661 	 *   These multicast group membership table elements are shared by the
2662 	 *   multicast groups stored within the table.
2663 	 */
2664 	__le32 num_mcast_table_elems;
2665 
2666 	/*
2667 	 * whether/how to do multicast->unicast conversion
2668 	 *
2669 	 *   This configuration parameter specifies whether the target should
2670 	 *   perform multicast --> unicast conversion on transmit, and if so,
2671 	 *   what to do if it finds no entries in its multicast group
2672 	 *   membership table for the multicast IP address in the tx frame.
2673 	 *   Configuration value:
2674 	 *   0 -> Do not perform multicast to unicast conversion.
2675 	 *   1 -> Convert multicast frames to unicast, if the IP multicast
2676 	 *        address from the tx frame is found in the multicast group
2677 	 *        membership table.  If the IP multicast address is not found,
2678 	 *        drop the frame.
2679 	 *   2 -> Convert multicast frames to unicast, if the IP multicast
2680 	 *        address from the tx frame is found in the multicast group
2681 	 *        membership table.  If the IP multicast address is not found,
2682 	 *        transmit the frame as multicast.
2683 	 */
2684 	__le32 mcast2ucast_mode;
2685 
2686 	/*
2687 	 * how much memory to allocate for a tx PPDU dbg log
2688 	 *
2689 	 *   This parameter controls how much memory the target will allocate
2690 	 *   to store a log of tx PPDU meta-information (how large the PPDU
2691 	 *   was, when it was sent, whether it was successful, etc.)
2692 	 */
2693 	__le32 tx_dbg_log_size;
2694 
2695 	/* how many AST entries to be allocated for WDS */
2696 	__le32 num_wds_entries;
2697 
2698 	/*
2699 	 * MAC DMA burst size, e.g., For target PCI limit can be
2700 	 * 0 -default, 1 256B
2701 	 */
2702 	__le32 dma_burst_size;
2703 
2704 	/*
2705 	 * Fixed delimiters to be inserted after every MPDU to
2706 	 * account for interface latency to avoid underrun.
2707 	 */
2708 	__le32 mac_aggr_delim;
2709 
2710 	/*
2711 	 *   determine whether target is responsible for detecting duplicate
2712 	 *   non-aggregate MPDU and timing out stale fragments.
2713 	 *
2714 	 *   A-MPDU reordering is always performed on the target.
2715 	 *
2716 	 *   0: target responsible for frag timeout and dup checking
2717 	 *   1: host responsible for frag timeout and dup checking
2718 	 */
2719 	__le32 rx_skip_defrag_timeout_dup_detection_check;
2720 
2721 	/*
2722 	 * Configuration for VoW :
2723 	 * No of Video Nodes to be supported
2724 	 * and Max no of descriptors for each Video link (node).
2725 	 */
2726 	__le32 vow_config;
2727 
2728 	/* Number of msdu descriptors target should use */
2729 	__le32 num_msdu_desc;
2730 
2731 	/*
2732 	 * Max. number of Tx fragments per MSDU
2733 	 *  This parameter controls the max number of Tx fragments per MSDU.
2734 	 *  This is sent by the target as part of the WMI_SERVICE_READY event
2735 	 *  and is overridden by the OS shim as required.
2736 	 */
2737 	__le32 max_frag_entries;
2738 } __packed;
2739 
2740 enum wmi_10_2_feature_mask {
2741 	WMI_10_2_RX_BATCH_MODE = BIT(0),
2742 	WMI_10_2_ATF_CONFIG    = BIT(1),
2743 	WMI_10_2_COEX_GPIO     = BIT(3),
2744 	WMI_10_2_BSS_CHAN_INFO = BIT(6),
2745 	WMI_10_2_PEER_STATS    = BIT(7),
2746 };
2747 
2748 struct wmi_resource_config_10_2 {
2749 	struct wmi_resource_config_10x common;
2750 	__le32 max_peer_ext_stats;
2751 	__le32 smart_ant_cap; /* 0-disable, 1-enable */
2752 	__le32 bk_min_free;
2753 	__le32 be_min_free;
2754 	__le32 vi_min_free;
2755 	__le32 vo_min_free;
2756 	__le32 feature_mask;
2757 } __packed;
2758 
2759 #define NUM_UNITS_IS_NUM_VDEVS         BIT(0)
2760 #define NUM_UNITS_IS_NUM_PEERS         BIT(1)
2761 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS  BIT(2)
2762 
2763 struct wmi_resource_config_10_4 {
2764 	/* Number of virtual devices (VAPs) to support */
2765 	__le32 num_vdevs;
2766 
2767 	/* Number of peer nodes to support */
2768 	__le32 num_peers;
2769 
2770 	/* Number of active peer nodes to support */
2771 	__le32 num_active_peers;
2772 
2773 	/* In offload mode, target supports features like WOW, chatter and other
2774 	 * protocol offloads. In order to support them some functionalities like
2775 	 * reorder buffering, PN checking need to be done in target.
2776 	 * This determines maximum number of peers supported by target in
2777 	 * offload mode.
2778 	 */
2779 	__le32 num_offload_peers;
2780 
2781 	/* Number of reorder buffers available for doing target based reorder
2782 	 * Rx reorder buffering
2783 	 */
2784 	__le32 num_offload_reorder_buffs;
2785 
2786 	/* Number of keys per peer */
2787 	__le32 num_peer_keys;
2788 
2789 	/* Total number of TX/RX data TIDs */
2790 	__le32 num_tids;
2791 
2792 	/* Max skid for resolving hash collisions.
2793 	 * The address search table is sparse, so that if two MAC addresses
2794 	 * result in the same hash value, the second of these conflicting
2795 	 * entries can slide to the next index in the address search table,
2796 	 * and use it, if it is unoccupied.  This ast_skid_limit parameter
2797 	 * specifies the upper bound on how many subsequent indices to search
2798 	 * over to find an unoccupied space.
2799 	 */
2800 	__le32 ast_skid_limit;
2801 
2802 	/* The nominal chain mask for transmit.
2803 	 * The chain mask may be modified dynamically, e.g. to operate AP tx
2804 	 * with a reduced number of chains if no clients are associated.
2805 	 * This configuration parameter specifies the nominal chain-mask that
2806 	 * should be used when not operating with a reduced set of tx chains.
2807 	 */
2808 	__le32 tx_chain_mask;
2809 
2810 	/* The nominal chain mask for receive.
2811 	 * The chain mask may be modified dynamically, e.g. for a client to use
2812 	 * a reduced number of chains for receive if the traffic to the client
2813 	 * is low enough that it doesn't require downlink MIMO or antenna
2814 	 * diversity. This configuration parameter specifies the nominal
2815 	 * chain-mask that should be used when not operating with a reduced
2816 	 * set of rx chains.
2817 	 */
2818 	__le32 rx_chain_mask;
2819 
2820 	/* What rx reorder timeout (ms) to use for the AC.
2821 	 * Each WMM access class (voice, video, best-effort, background) will
2822 	 * have its own timeout value to dictate how long to wait for missing
2823 	 * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2824 	 * been received. This parameter specifies the timeout in milliseconds
2825 	 * for each class.
2826 	 */
2827 	__le32 rx_timeout_pri[4];
2828 
2829 	/* What mode the rx should decap packets to.
2830 	 * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2831 	 * This setting also determines the default TX behavior, however TX
2832 	 * behavior can be modified on a per VAP basis during VAP init
2833 	 */
2834 	__le32 rx_decap_mode;
2835 
2836 	__le32 scan_max_pending_req;
2837 
2838 	__le32 bmiss_offload_max_vdev;
2839 
2840 	__le32 roam_offload_max_vdev;
2841 
2842 	__le32 roam_offload_max_ap_profiles;
2843 
2844 	/* How many groups to use for mcast->ucast conversion.
2845 	 * The target's WAL maintains a table to hold information regarding
2846 	 * which peers belong to a given multicast group, so that if
2847 	 * multicast->unicast conversion is enabled, the target can convert
2848 	 * multicast tx frames to a series of unicast tx frames, to each peer
2849 	 * within the multicast group. This num_mcast_groups configuration
2850 	 * parameter tells the target how many multicast groups to provide
2851 	 * storage for within its multicast group membership table.
2852 	 */
2853 	__le32 num_mcast_groups;
2854 
2855 	/* Size to alloc for the mcast membership table.
2856 	 * This num_mcast_table_elems configuration parameter tells the target
2857 	 * how many peer elements it needs to provide storage for in its
2858 	 * multicast group membership table. These multicast group membership
2859 	 * table elements are shared by the multicast groups stored within
2860 	 * the table.
2861 	 */
2862 	__le32 num_mcast_table_elems;
2863 
2864 	/* Whether/how to do multicast->unicast conversion.
2865 	 * This configuration parameter specifies whether the target should
2866 	 * perform multicast --> unicast conversion on transmit, and if so,
2867 	 * what to do if it finds no entries in its multicast group membership
2868 	 * table for the multicast IP address in the tx frame.
2869 	 * Configuration value:
2870 	 * 0 -> Do not perform multicast to unicast conversion.
2871 	 * 1 -> Convert multicast frames to unicast, if the IP multicast address
2872 	 *      from the tx frame is found in the multicast group membership
2873 	 *      table.  If the IP multicast address is not found, drop the frame
2874 	 * 2 -> Convert multicast frames to unicast, if the IP multicast address
2875 	 *      from the tx frame is found in the multicast group membership
2876 	 *      table.  If the IP multicast address is not found, transmit the
2877 	 *      frame as multicast.
2878 	 */
2879 	__le32 mcast2ucast_mode;
2880 
2881 	/* How much memory to allocate for a tx PPDU dbg log.
2882 	 * This parameter controls how much memory the target will allocate to
2883 	 * store a log of tx PPDU meta-information (how large the PPDU was,
2884 	 * when it was sent, whether it was successful, etc.)
2885 	 */
2886 	__le32 tx_dbg_log_size;
2887 
2888 	/* How many AST entries to be allocated for WDS */
2889 	__le32 num_wds_entries;
2890 
2891 	/* MAC DMA burst size. 0 -default, 1 -256B */
2892 	__le32 dma_burst_size;
2893 
2894 	/* Fixed delimiters to be inserted after every MPDU to account for
2895 	 * interface latency to avoid underrun.
2896 	 */
2897 	__le32 mac_aggr_delim;
2898 
2899 	/* Determine whether target is responsible for detecting duplicate
2900 	 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2901 	 * is always performed on the target.
2902 	 *
2903 	 * 0: target responsible for frag timeout and dup checking
2904 	 * 1: host responsible for frag timeout and dup checking
2905 	 */
2906 	__le32 rx_skip_defrag_timeout_dup_detection_check;
2907 
2908 	/* Configuration for VoW : No of Video nodes to be supported and max
2909 	 * no of descriptors for each video link (node).
2910 	 */
2911 	__le32 vow_config;
2912 
2913 	/* Maximum vdev that could use gtk offload */
2914 	__le32 gtk_offload_max_vdev;
2915 
2916 	/* Number of msdu descriptors target should use */
2917 	__le32 num_msdu_desc;
2918 
2919 	/* Max number of tx fragments per MSDU.
2920 	 * This parameter controls the max number of tx fragments per MSDU.
2921 	 * This will passed by target as part of the WMI_SERVICE_READY event
2922 	 * and is overridden by the OS shim as required.
2923 	 */
2924 	__le32 max_frag_entries;
2925 
2926 	/* Max number of extended peer stats.
2927 	 * This parameter controls the max number of peers for which extended
2928 	 * statistics are supported by target
2929 	 */
2930 	__le32 max_peer_ext_stats;
2931 
2932 	/* Smart antenna capabilities information.
2933 	 * 1 - Smart antenna is enabled
2934 	 * 0 - Smart antenna is disabled
2935 	 * In future this can contain smart antenna specific capabilities.
2936 	 */
2937 	__le32 smart_ant_cap;
2938 
2939 	/* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2940 	 * during init.
2941 	 */
2942 	__le32 bk_minfree;
2943 	__le32 be_minfree;
2944 	__le32 vi_minfree;
2945 	__le32 vo_minfree;
2946 
2947 	/* Rx batch mode capability.
2948 	 * 1 - Rx batch mode enabled
2949 	 * 0 - Rx batch mode disabled
2950 	 */
2951 	__le32 rx_batchmode;
2952 
2953 	/* Thermal throttling capability.
2954 	 * 1 - Capable of thermal throttling
2955 	 * 0 - Not capable of thermal throttling
2956 	 */
2957 	__le32 tt_support;
2958 
2959 	/* ATF configuration.
2960 	 * 1  - Enable ATF
2961 	 * 0  - Disable ATF
2962 	 */
2963 	__le32 atf_config;
2964 
2965 	/* Configure padding to manage IP header un-alignment
2966 	 * 1  - Enable padding
2967 	 * 0  - Disable padding
2968 	 */
2969 	__le32 iphdr_pad_config;
2970 
2971 	/* qwrap configuration (bits 15-0)
2972 	 * 1  - This is qwrap configuration
2973 	 * 0  - This is not qwrap
2974 	 *
2975 	 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
2976 	 * In order to get ack-RSSI reporting and to specify the tx-rate for
2977 	 * individual frames, this option must be enabled.  This uses an extra
2978 	 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
2979 	 */
2980 	__le32 qwrap_config;
2981 } __packed;
2982 
2983 enum wmi_coex_version {
2984 	WMI_NO_COEX_VERSION_SUPPORT	= 0,
2985 	/* 3 wire coex support*/
2986 	WMI_COEX_VERSION_1		= 1,
2987 	/* 2.5 wire coex support*/
2988 	WMI_COEX_VERSION_2		= 2,
2989 	/* 2.5 wire coex with duty cycle support */
2990 	WMI_COEX_VERSION_3		= 3,
2991 	/* 4 wire coex support*/
2992 	WMI_COEX_VERSION_4		= 4,
2993 };
2994 
2995 /**
2996  * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
2997  * @WMI_10_4_LTEU_SUPPORT: LTEU config
2998  * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
2999  * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
3000  * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
3001  * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
3002  * @WMI_10_4_PEER_STATS: Per station stats
3003  * @WMI_10_4_VDEV_STATS: Per vdev stats
3004  * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable
3005  * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable
3006  * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable
3007  * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable
3008  * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
3009  *	enable/disable
3010  * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable
3011  * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable
3012  */
3013 enum wmi_10_4_feature_mask {
3014 	WMI_10_4_LTEU_SUPPORT			= BIT(0),
3015 	WMI_10_4_COEX_GPIO_SUPPORT		= BIT(1),
3016 	WMI_10_4_AUX_RADIO_SPECTRAL_INTF	= BIT(2),
3017 	WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF	= BIT(3),
3018 	WMI_10_4_BSS_CHANNEL_INFO_64		= BIT(4),
3019 	WMI_10_4_PEER_STATS			= BIT(5),
3020 	WMI_10_4_VDEV_STATS			= BIT(6),
3021 	WMI_10_4_TDLS				= BIT(7),
3022 	WMI_10_4_TDLS_OFFCHAN			= BIT(8),
3023 	WMI_10_4_TDLS_UAPSD_BUFFER_STA		= BIT(9),
3024 	WMI_10_4_TDLS_UAPSD_SLEEP_STA		= BIT(10),
3025 	WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),
3026 	WMI_10_4_TDLS_EXPLICIT_MODE_ONLY	= BIT(12),
3027 	WMI_10_4_TX_DATA_ACK_RSSI               = BIT(16),
3028 	WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT	= BIT(17),
3029 	WMI_10_4_REPORT_AIRTIME			= BIT(18),
3030 
3031 };
3032 
3033 struct wmi_ext_resource_config_10_4_cmd {
3034 	/* contains enum wmi_host_platform_type */
3035 	__le32 host_platform_config;
3036 	/* see enum wmi_10_4_feature_mask */
3037 	__le32 fw_feature_bitmap;
3038 	/* WLAN priority GPIO number */
3039 	__le32 wlan_gpio_priority;
3040 	/* see enum wmi_coex_version */
3041 	__le32 coex_version;
3042 	/* COEX GPIO config */
3043 	__le32 coex_gpio_pin1;
3044 	__le32 coex_gpio_pin2;
3045 	__le32 coex_gpio_pin3;
3046 	/* number of vdevs allowed to perform tdls */
3047 	__le32 num_tdls_vdevs;
3048 	/* number of peers to track per TDLS vdev */
3049 	__le32 num_tdls_conn_table_entries;
3050 	/* number of tdls sleep sta supported */
3051 	__le32 max_tdls_concurrent_sleep_sta;
3052 	/* number of tdls buffer sta supported */
3053 	__le32 max_tdls_concurrent_buffer_sta;
3054 };
3055 
3056 /* structure describing host memory chunk. */
3057 struct host_memory_chunk {
3058 	/* id of the request that is passed up in service ready */
3059 	__le32 req_id;
3060 	/* the physical address the memory chunk */
3061 	__le32 ptr;
3062 	/* size of the chunk */
3063 	__le32 size;
3064 } __packed;
3065 
3066 #define WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID 8
3067 
3068 struct wmi_host_mem_chunks {
3069 	__le32 count;
3070 	/* some fw revisions require at least 1 chunk regardless of count */
3071 	struct host_memory_chunk items[1];
3072 } __packed;
3073 
3074 struct wmi_init_cmd {
3075 	struct wmi_resource_config resource_config;
3076 	struct wmi_host_mem_chunks mem_chunks;
3077 } __packed;
3078 
3079 /* _10x structure is from 10.X FW API */
3080 struct wmi_init_cmd_10x {
3081 	struct wmi_resource_config_10x resource_config;
3082 	struct wmi_host_mem_chunks mem_chunks;
3083 } __packed;
3084 
3085 struct wmi_init_cmd_10_2 {
3086 	struct wmi_resource_config_10_2 resource_config;
3087 	struct wmi_host_mem_chunks mem_chunks;
3088 } __packed;
3089 
3090 struct wmi_init_cmd_10_4 {
3091 	struct wmi_resource_config_10_4 resource_config;
3092 	struct wmi_host_mem_chunks mem_chunks;
3093 } __packed;
3094 
3095 struct wmi_chan_list_entry {
3096 	__le16 freq;
3097 	u8 phy_mode; /* valid for 10.2 only */
3098 	u8 reserved;
3099 } __packed;
3100 
3101 /* TLV for channel list */
3102 struct wmi_chan_list {
3103 	__le32 tag; /* WMI_CHAN_LIST_TAG */
3104 	__le32 num_chan;
3105 	struct wmi_chan_list_entry channel_list[];
3106 } __packed;
3107 
3108 struct wmi_bssid_list {
3109 	__le32 tag; /* WMI_BSSID_LIST_TAG */
3110 	__le32 num_bssid;
3111 	struct wmi_mac_addr bssid_list[];
3112 } __packed;
3113 
3114 struct wmi_ie_data {
3115 	__le32 tag; /* WMI_IE_TAG */
3116 	__le32 ie_len;
3117 	u8 ie_data[];
3118 } __packed;
3119 
3120 struct wmi_ssid {
3121 	__le32 ssid_len;
3122 	u8 ssid[32];
3123 } __packed;
3124 
3125 struct wmi_ssid_list {
3126 	__le32 tag; /* WMI_SSID_LIST_TAG */
3127 	__le32 num_ssids;
3128 	struct wmi_ssid ssids[];
3129 } __packed;
3130 
3131 /* prefix used by scan requestor ids on the host */
3132 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
3133 
3134 /* prefix used by scan request ids generated on the host */
3135 /* host cycles through the lower 12 bits to generate ids */
3136 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
3137 
3138 #define WLAN_SCAN_PARAMS_MAX_SSID    16
3139 #define WLAN_SCAN_PARAMS_MAX_BSSID   4
3140 #define WLAN_SCAN_PARAMS_MAX_IE_LEN  256
3141 
3142 /* Values lower than this may be refused by some firmware revisions with a scan
3143  * completion with a timedout reason.
3144  */
3145 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
3146 
3147 /* Scan priority numbers must be sequential, starting with 0 */
3148 enum wmi_scan_priority {
3149 	WMI_SCAN_PRIORITY_VERY_LOW = 0,
3150 	WMI_SCAN_PRIORITY_LOW,
3151 	WMI_SCAN_PRIORITY_MEDIUM,
3152 	WMI_SCAN_PRIORITY_HIGH,
3153 	WMI_SCAN_PRIORITY_VERY_HIGH,
3154 	WMI_SCAN_PRIORITY_COUNT   /* number of priorities supported */
3155 };
3156 
3157 struct wmi_start_scan_common {
3158 	/* Scan ID */
3159 	__le32 scan_id;
3160 	/* Scan requestor ID */
3161 	__le32 scan_req_id;
3162 	/* VDEV id(interface) that is requesting scan */
3163 	__le32 vdev_id;
3164 	/* Scan Priority, input to scan scheduler */
3165 	__le32 scan_priority;
3166 	/* Scan events subscription */
3167 	__le32 notify_scan_events;
3168 	/* dwell time in msec on active channels */
3169 	__le32 dwell_time_active;
3170 	/* dwell time in msec on passive channels */
3171 	__le32 dwell_time_passive;
3172 	/*
3173 	 * min time in msec on the BSS channel,only valid if at least one
3174 	 * VDEV is active
3175 	 */
3176 	__le32 min_rest_time;
3177 	/*
3178 	 * max rest time in msec on the BSS channel,only valid if at least
3179 	 * one VDEV is active
3180 	 */
3181 	/*
3182 	 * the scanner will rest on the bss channel at least min_rest_time
3183 	 * after min_rest_time the scanner will start checking for tx/rx
3184 	 * activity on all VDEVs. if there is no activity the scanner will
3185 	 * switch to off channel. if there is activity the scanner will let
3186 	 * the radio on the bss channel until max_rest_time expires.at
3187 	 * max_rest_time scanner will switch to off channel irrespective of
3188 	 * activity. activity is determined by the idle_time parameter.
3189 	 */
3190 	__le32 max_rest_time;
3191 	/*
3192 	 * time before sending next set of probe requests.
3193 	 * The scanner keeps repeating probe requests transmission with
3194 	 * period specified by repeat_probe_time.
3195 	 * The number of probe requests specified depends on the ssid_list
3196 	 * and bssid_list
3197 	 */
3198 	__le32 repeat_probe_time;
3199 	/* time in msec between 2 consecutive probe requests with in a set. */
3200 	__le32 probe_spacing_time;
3201 	/*
3202 	 * data inactivity time in msec on bss channel that will be used by
3203 	 * scanner for measuring the inactivity.
3204 	 */
3205 	__le32 idle_time;
3206 	/* maximum time in msec allowed for scan  */
3207 	__le32 max_scan_time;
3208 	/*
3209 	 * delay in msec before sending first probe request after switching
3210 	 * to a channel
3211 	 */
3212 	__le32 probe_delay;
3213 	/* Scan control flags */
3214 	__le32 scan_ctrl_flags;
3215 } __packed;
3216 
3217 struct wmi_start_scan_tlvs {
3218 	/* TLV parameters. These includes channel list, ssid list, bssid list,
3219 	 * extra ies.
3220 	 */
3221 	u8 tlvs[0];
3222 } __packed;
3223 
3224 struct wmi_start_scan_cmd {
3225 	struct wmi_start_scan_common common;
3226 	__le32 burst_duration_ms;
3227 	struct wmi_start_scan_tlvs tlvs;
3228 } __packed;
3229 
3230 /* This is the definition from 10.X firmware branch */
3231 struct wmi_10x_start_scan_cmd {
3232 	struct wmi_start_scan_common common;
3233 	struct wmi_start_scan_tlvs tlvs;
3234 } __packed;
3235 
3236 struct wmi_ssid_arg {
3237 	int len;
3238 	const u8 *ssid;
3239 };
3240 
3241 struct wmi_bssid_arg {
3242 	const u8 *bssid;
3243 };
3244 
3245 struct wmi_start_scan_arg {
3246 	u32 scan_id;
3247 	u32 scan_req_id;
3248 	u32 vdev_id;
3249 	u32 scan_priority;
3250 	u32 notify_scan_events;
3251 	u32 dwell_time_active;
3252 	u32 dwell_time_passive;
3253 	u32 min_rest_time;
3254 	u32 max_rest_time;
3255 	u32 repeat_probe_time;
3256 	u32 probe_spacing_time;
3257 	u32 idle_time;
3258 	u32 max_scan_time;
3259 	u32 probe_delay;
3260 	u32 scan_ctrl_flags;
3261 	u32 burst_duration_ms;
3262 
3263 	u32 ie_len;
3264 	u32 n_channels;
3265 	u32 n_ssids;
3266 	u32 n_bssids;
3267 
3268 	u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
3269 	u16 channels[64];
3270 	struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
3271 	struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
3272 	struct wmi_mac_addr mac_addr;
3273 	struct wmi_mac_addr mac_mask;
3274 };
3275 
3276 /* scan control flags */
3277 
3278 /* passively scan all channels including active channels */
3279 #define WMI_SCAN_FLAG_PASSIVE        0x1
3280 /* add wild card ssid probe request even though ssid_list is specified. */
3281 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
3282 /* add cck rates to rates/xrate ie for the generated probe request */
3283 #define WMI_SCAN_ADD_CCK_RATES 0x4
3284 /* add ofdm rates to rates/xrate ie for the generated probe request */
3285 #define WMI_SCAN_ADD_OFDM_RATES 0x8
3286 /* To enable indication of Chan load and Noise floor to host */
3287 #define WMI_SCAN_CHAN_STAT_EVENT 0x10
3288 /* Filter Probe request frames  */
3289 #define WMI_SCAN_FILTER_PROBE_REQ 0x20
3290 /* When set, DFS channels will not be scanned */
3291 #define WMI_SCAN_BYPASS_DFS_CHN 0x40
3292 /* Different FW scan engine may choose to bail out on errors.
3293  * Allow the driver to have influence over that.
3294  */
3295 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80
3296 
3297 /* Use random MAC address for TA for Probe Request frame and add
3298  * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
3299  * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
3300  */
3301 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ   0x1000
3302 
3303 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
3304 #define WMI_SCAN_CLASS_MASK 0xFF000000
3305 
3306 enum wmi_stop_scan_type {
3307 	WMI_SCAN_STOP_ONE	= 0x00000000, /* stop by scan_id */
3308 	WMI_SCAN_STOP_VDEV_ALL	= 0x01000000, /* stop by vdev_id */
3309 	WMI_SCAN_STOP_ALL	= 0x04000000, /* stop all scans */
3310 };
3311 
3312 struct wmi_stop_scan_cmd {
3313 	__le32 scan_req_id;
3314 	__le32 scan_id;
3315 	__le32 req_type;
3316 	__le32 vdev_id;
3317 } __packed;
3318 
3319 struct wmi_stop_scan_arg {
3320 	u32 req_id;
3321 	enum wmi_stop_scan_type req_type;
3322 	union {
3323 		u32 scan_id;
3324 		u32 vdev_id;
3325 	} u;
3326 };
3327 
3328 struct wmi_scan_chan_list_cmd {
3329 	__le32 num_scan_chans;
3330 	struct wmi_channel chan_info[];
3331 } __packed;
3332 
3333 struct wmi_scan_chan_list_arg {
3334 	u32 n_channels;
3335 	struct wmi_channel_arg *channels;
3336 };
3337 
3338 enum wmi_bss_filter {
3339 	WMI_BSS_FILTER_NONE = 0,        /* no beacons forwarded */
3340 	WMI_BSS_FILTER_ALL,             /* all beacons forwarded */
3341 	WMI_BSS_FILTER_PROFILE,         /* only beacons matching profile */
3342 	WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
3343 	WMI_BSS_FILTER_CURRENT_BSS,     /* only beacons matching current BSS */
3344 	WMI_BSS_FILTER_ALL_BUT_BSS,     /* all but beacons matching BSS */
3345 	WMI_BSS_FILTER_PROBED_SSID,     /* beacons matching probed ssid */
3346 	WMI_BSS_FILTER_LAST_BSS,        /* marker only */
3347 };
3348 
3349 enum wmi_scan_event_type {
3350 	WMI_SCAN_EVENT_STARTED              = BIT(0),
3351 	WMI_SCAN_EVENT_COMPLETED            = BIT(1),
3352 	WMI_SCAN_EVENT_BSS_CHANNEL          = BIT(2),
3353 	WMI_SCAN_EVENT_FOREIGN_CHANNEL      = BIT(3),
3354 	WMI_SCAN_EVENT_DEQUEUED             = BIT(4),
3355 	/* possibly by high-prio scan */
3356 	WMI_SCAN_EVENT_PREEMPTED            = BIT(5),
3357 	WMI_SCAN_EVENT_START_FAILED         = BIT(6),
3358 	WMI_SCAN_EVENT_RESTARTED            = BIT(7),
3359 	WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
3360 	WMI_SCAN_EVENT_MAX                  = BIT(15),
3361 };
3362 
3363 enum wmi_scan_completion_reason {
3364 	WMI_SCAN_REASON_COMPLETED,
3365 	WMI_SCAN_REASON_CANCELLED,
3366 	WMI_SCAN_REASON_PREEMPTED,
3367 	WMI_SCAN_REASON_TIMEDOUT,
3368 	WMI_SCAN_REASON_INTERNAL_FAILURE,
3369 	WMI_SCAN_REASON_MAX,
3370 };
3371 
3372 struct wmi_scan_event {
3373 	__le32 event_type; /* %WMI_SCAN_EVENT_ */
3374 	__le32 reason; /* %WMI_SCAN_REASON_ */
3375 	__le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
3376 	__le32 scan_req_id;
3377 	__le32 scan_id;
3378 	__le32 vdev_id;
3379 } __packed;
3380 
3381 /*
3382  * This defines how much headroom is kept in the
3383  * receive frame between the descriptor and the
3384  * payload, in order for the WMI PHY error and
3385  * management handler to insert header contents.
3386  *
3387  * This is in bytes.
3388  */
3389 #define WMI_MGMT_RX_HDR_HEADROOM    52
3390 
3391 /*
3392  * This event will be used for sending scan results
3393  * as well as rx mgmt frames to the host. The rx buffer
3394  * will be sent as part of this WMI event. It would be a
3395  * good idea to pass all the fields in the RX status
3396  * descriptor up to the host.
3397  */
3398 struct wmi_mgmt_rx_hdr_v1 {
3399 	__le32 channel;
3400 	__le32 snr;
3401 	__le32 rate;
3402 	__le32 phy_mode;
3403 	__le32 buf_len;
3404 	__le32 status; /* %WMI_RX_STATUS_ */
3405 } __packed;
3406 
3407 struct wmi_mgmt_rx_hdr_v2 {
3408 	struct wmi_mgmt_rx_hdr_v1 v1;
3409 	__le32 rssi_ctl[4];
3410 } __packed;
3411 
3412 struct wmi_mgmt_rx_event_v1 {
3413 	struct wmi_mgmt_rx_hdr_v1 hdr;
3414 	u8 buf[];
3415 } __packed;
3416 
3417 struct wmi_mgmt_rx_event_v2 {
3418 	struct wmi_mgmt_rx_hdr_v2 hdr;
3419 	u8 buf[];
3420 } __packed;
3421 
3422 struct wmi_10_4_mgmt_rx_hdr {
3423 	__le32 channel;
3424 	__le32 snr;
3425 	    u8 rssi_ctl[4];
3426 	__le32 rate;
3427 	__le32 phy_mode;
3428 	__le32 buf_len;
3429 	__le32 status;
3430 } __packed;
3431 
3432 struct wmi_10_4_mgmt_rx_event {
3433 	struct wmi_10_4_mgmt_rx_hdr hdr;
3434 	u8 buf[];
3435 } __packed;
3436 
3437 struct wmi_mgmt_rx_ext_info {
3438 	__le64 rx_mac_timestamp;
3439 } __packed __aligned(4);
3440 
3441 #define WMI_RX_STATUS_OK			0x00
3442 #define WMI_RX_STATUS_ERR_CRC			0x01
3443 #define WMI_RX_STATUS_ERR_DECRYPT		0x08
3444 #define WMI_RX_STATUS_ERR_MIC			0x10
3445 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS	0x20
3446 /* Extension data at the end of mgmt frame */
3447 #define WMI_RX_STATUS_EXT_INFO		0x40
3448 
3449 #define PHY_ERROR_GEN_SPECTRAL_SCAN		0x26
3450 #define PHY_ERROR_GEN_FALSE_RADAR_EXT		0x24
3451 #define PHY_ERROR_GEN_RADAR			0x05
3452 
3453 #define PHY_ERROR_10_4_RADAR_MASK               0x4
3454 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK       0x4000000
3455 
3456 enum phy_err_type {
3457 	PHY_ERROR_UNKNOWN,
3458 	PHY_ERROR_SPECTRAL_SCAN,
3459 	PHY_ERROR_FALSE_RADAR_EXT,
3460 	PHY_ERROR_RADAR
3461 };
3462 
3463 struct wmi_phyerr {
3464 	__le32 tsf_timestamp;
3465 	__le16 freq1;
3466 	__le16 freq2;
3467 	u8 rssi_combined;
3468 	u8 chan_width_mhz;
3469 	u8 phy_err_code;
3470 	u8 rsvd0;
3471 	__le32 rssi_chains[4];
3472 	__le16 nf_chains[4];
3473 	__le32 buf_len;
3474 	u8 buf[];
3475 } __packed;
3476 
3477 struct wmi_phyerr_event {
3478 	__le32 num_phyerrs;
3479 	__le32 tsf_l32;
3480 	__le32 tsf_u32;
3481 
3482 	/* array of struct wmi_phyerr */
3483 	u8 phyerrs[];
3484 } __packed;
3485 
3486 struct wmi_10_4_phyerr_event {
3487 	__le32 tsf_l32;
3488 	__le32 tsf_u32;
3489 	__le16 freq1;
3490 	__le16 freq2;
3491 	u8 rssi_combined;
3492 	u8 chan_width_mhz;
3493 	u8 phy_err_code;
3494 	u8 rsvd0;
3495 	__le32 rssi_chains[4];
3496 	__le16 nf_chains[4];
3497 	__le32 phy_err_mask[2];
3498 	__le32 tsf_timestamp;
3499 	__le32 buf_len;
3500 	u8 buf[];
3501 } __packed;
3502 
3503 struct wmi_radar_found_info {
3504 	__le32 pri_min;
3505 	__le32 pri_max;
3506 	__le32 width_min;
3507 	__le32 width_max;
3508 	__le32 sidx_min;
3509 	__le32 sidx_max;
3510 } __packed;
3511 
3512 enum wmi_radar_confirmation_status {
3513 	/* Detected radar was due to SW pulses */
3514 	WMI_SW_RADAR_DETECTED    = 0,
3515 
3516 	WMI_RADAR_DETECTION_FAIL = 1,
3517 
3518 	/* Real radar detected */
3519 	WMI_HW_RADAR_DETECTED    = 2,
3520 };
3521 
3522 #define PHYERR_TLV_SIG				0xBB
3523 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT	0xFB
3524 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY	0xF8
3525 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT	0xF9
3526 
3527 struct phyerr_radar_report {
3528 	__le32 reg0; /* RADAR_REPORT_REG0_* */
3529 	__le32 reg1; /* RADAR_REPORT_REG1_* */
3530 } __packed;
3531 
3532 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK		0x80000000
3533 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB		31
3534 
3535 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK	0x40000000
3536 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB	30
3537 
3538 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK		0x3FF00000
3539 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB		20
3540 
3541 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK		0x000F0000
3542 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB		16
3543 
3544 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK		0x0000FC00
3545 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB		10
3546 
3547 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK		0x000003FF
3548 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB		0
3549 
3550 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK	0x80000000
3551 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB	31
3552 
3553 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK	0x7F000000
3554 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB		24
3555 
3556 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK	0x00FF0000
3557 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB	16
3558 
3559 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK		0x0000FF00
3560 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB		8
3561 
3562 #define RADAR_REPORT_REG1_PULSE_DUR_MASK		0x000000FF
3563 #define RADAR_REPORT_REG1_PULSE_DUR_LSB			0
3564 
3565 struct phyerr_fft_report {
3566 	__le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
3567 	__le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
3568 } __packed;
3569 
3570 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK	0xFF800000
3571 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB	23
3572 
3573 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK		0x007FC000
3574 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB		14
3575 
3576 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK		0x00003000
3577 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB		12
3578 
3579 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK		0x00000FFF
3580 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB		0
3581 
3582 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK		0xFC000000
3583 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB		26
3584 
3585 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK		0x03FC0000
3586 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB		18
3587 
3588 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK		0x0003FF00
3589 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB		8
3590 
3591 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK	0x000000FF
3592 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB	0
3593 
3594 struct phyerr_tlv {
3595 	__le16 len;
3596 	u8 tag;
3597 	u8 sig;
3598 } __packed;
3599 
3600 #define DFS_RSSI_POSSIBLY_FALSE			50
3601 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE	40
3602 
3603 struct wmi_mgmt_tx_hdr {
3604 	__le32 vdev_id;
3605 	struct wmi_mac_addr peer_macaddr;
3606 	__le32 tx_rate;
3607 	__le32 tx_power;
3608 	__le32 buf_len;
3609 } __packed;
3610 
3611 struct wmi_mgmt_tx_cmd {
3612 	struct wmi_mgmt_tx_hdr hdr;
3613 	u8 buf[];
3614 } __packed;
3615 
3616 struct wmi_echo_event {
3617 	__le32 value;
3618 } __packed;
3619 
3620 struct wmi_echo_cmd {
3621 	__le32 value;
3622 } __packed;
3623 
3624 struct wmi_pdev_set_regdomain_cmd {
3625 	__le32 reg_domain;
3626 	__le32 reg_domain_2G;
3627 	__le32 reg_domain_5G;
3628 	__le32 conformance_test_limit_2G;
3629 	__le32 conformance_test_limit_5G;
3630 } __packed;
3631 
3632 enum wmi_dfs_region {
3633 	/* Uninitialized dfs domain */
3634 	WMI_UNINIT_DFS_DOMAIN = 0,
3635 
3636 	/* FCC3 dfs domain */
3637 	WMI_FCC_DFS_DOMAIN = 1,
3638 
3639 	/* ETSI dfs domain */
3640 	WMI_ETSI_DFS_DOMAIN = 2,
3641 
3642 	/*Japan dfs domain */
3643 	WMI_MKK4_DFS_DOMAIN = 3,
3644 };
3645 
3646 struct wmi_pdev_set_regdomain_cmd_10x {
3647 	__le32 reg_domain;
3648 	__le32 reg_domain_2G;
3649 	__le32 reg_domain_5G;
3650 	__le32 conformance_test_limit_2G;
3651 	__le32 conformance_test_limit_5G;
3652 
3653 	/* dfs domain from wmi_dfs_region */
3654 	__le32 dfs_domain;
3655 } __packed;
3656 
3657 /* Command to set/unset chip in quiet mode */
3658 struct wmi_pdev_set_quiet_cmd {
3659 	/* period in TUs */
3660 	__le32 period;
3661 
3662 	/* duration in TUs */
3663 	__le32 duration;
3664 
3665 	/* offset in TUs */
3666 	__le32 next_start;
3667 
3668 	/* enable/disable */
3669 	__le32 enabled;
3670 } __packed;
3671 
3672 /*
3673  * 802.11g protection mode.
3674  */
3675 enum ath10k_protmode {
3676 	ATH10K_PROT_NONE     = 0,    /* no protection */
3677 	ATH10K_PROT_CTSONLY  = 1,    /* CTS to self */
3678 	ATH10K_PROT_RTSCTS   = 2,    /* RTS-CTS */
3679 };
3680 
3681 enum wmi_rtscts_profile {
3682 	WMI_RTSCTS_FOR_NO_RATESERIES = 0,
3683 	WMI_RTSCTS_FOR_SECOND_RATESERIES,
3684 	WMI_RTSCTS_ACROSS_SW_RETRIES
3685 };
3686 
3687 #define WMI_RTSCTS_ENABLED		1
3688 #define WMI_RTSCTS_SET_MASK		0x0f
3689 #define WMI_RTSCTS_SET_LSB		0
3690 
3691 #define WMI_RTSCTS_PROFILE_MASK		0xf0
3692 #define WMI_RTSCTS_PROFILE_LSB		4
3693 
3694 enum wmi_beacon_gen_mode {
3695 	WMI_BEACON_STAGGERED_MODE = 0,
3696 	WMI_BEACON_BURST_MODE = 1
3697 };
3698 
3699 enum wmi_csa_event_ies_present_flag {
3700 	WMI_CSA_IE_PRESENT = 0x00000001,
3701 	WMI_XCSA_IE_PRESENT = 0x00000002,
3702 	WMI_WBW_IE_PRESENT = 0x00000004,
3703 	WMI_CSWARP_IE_PRESENT = 0x00000008,
3704 };
3705 
3706 /* wmi CSA receive event from beacon frame */
3707 struct wmi_csa_event {
3708 	__le32 i_fc_dur;
3709 	/* Bit 0-15: FC */
3710 	/* Bit 16-31: DUR */
3711 	struct wmi_mac_addr i_addr1;
3712 	struct wmi_mac_addr i_addr2;
3713 	__le32 csa_ie[2];
3714 	__le32 xcsa_ie[2];
3715 	__le32 wb_ie[2];
3716 	__le32 cswarp_ie;
3717 	__le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
3718 } __packed;
3719 
3720 /* the definition of different PDEV parameters */
3721 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3722 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3723 #define PEER_DEFAULT_STATS_UPDATE_PERIOD    500
3724 
3725 struct wmi_pdev_param_map {
3726 	u32 tx_chain_mask;
3727 	u32 rx_chain_mask;
3728 	u32 txpower_limit2g;
3729 	u32 txpower_limit5g;
3730 	u32 txpower_scale;
3731 	u32 beacon_gen_mode;
3732 	u32 beacon_tx_mode;
3733 	u32 resmgr_offchan_mode;
3734 	u32 protection_mode;
3735 	u32 dynamic_bw;
3736 	u32 non_agg_sw_retry_th;
3737 	u32 agg_sw_retry_th;
3738 	u32 sta_kickout_th;
3739 	u32 ac_aggrsize_scaling;
3740 	u32 ltr_enable;
3741 	u32 ltr_ac_latency_be;
3742 	u32 ltr_ac_latency_bk;
3743 	u32 ltr_ac_latency_vi;
3744 	u32 ltr_ac_latency_vo;
3745 	u32 ltr_ac_latency_timeout;
3746 	u32 ltr_sleep_override;
3747 	u32 ltr_rx_override;
3748 	u32 ltr_tx_activity_timeout;
3749 	u32 l1ss_enable;
3750 	u32 dsleep_enable;
3751 	u32 pcielp_txbuf_flush;
3752 	u32 pcielp_txbuf_watermark;
3753 	u32 pcielp_txbuf_tmo_en;
3754 	u32 pcielp_txbuf_tmo_value;
3755 	u32 pdev_stats_update_period;
3756 	u32 vdev_stats_update_period;
3757 	u32 peer_stats_update_period;
3758 	u32 bcnflt_stats_update_period;
3759 	u32 pmf_qos;
3760 	u32 arp_ac_override;
3761 	u32 dcs;
3762 	u32 ani_enable;
3763 	u32 ani_poll_period;
3764 	u32 ani_listen_period;
3765 	u32 ani_ofdm_level;
3766 	u32 ani_cck_level;
3767 	u32 dyntxchain;
3768 	u32 proxy_sta;
3769 	u32 idle_ps_config;
3770 	u32 power_gating_sleep;
3771 	u32 fast_channel_reset;
3772 	u32 burst_dur;
3773 	u32 burst_enable;
3774 	u32 cal_period;
3775 	u32 aggr_burst;
3776 	u32 rx_decap_mode;
3777 	u32 smart_antenna_default_antenna;
3778 	u32 igmpmld_override;
3779 	u32 igmpmld_tid;
3780 	u32 antenna_gain;
3781 	u32 rx_filter;
3782 	u32 set_mcast_to_ucast_tid;
3783 	u32 proxy_sta_mode;
3784 	u32 set_mcast2ucast_mode;
3785 	u32 set_mcast2ucast_buffer;
3786 	u32 remove_mcast2ucast_buffer;
3787 	u32 peer_sta_ps_statechg_enable;
3788 	u32 igmpmld_ac_override;
3789 	u32 block_interbss;
3790 	u32 set_disable_reset_cmdid;
3791 	u32 set_msdu_ttl_cmdid;
3792 	u32 set_ppdu_duration_cmdid;
3793 	u32 txbf_sound_period_cmdid;
3794 	u32 set_promisc_mode_cmdid;
3795 	u32 set_burst_mode_cmdid;
3796 	u32 en_stats;
3797 	u32 mu_group_policy;
3798 	u32 noise_detection;
3799 	u32 noise_threshold;
3800 	u32 dpd_enable;
3801 	u32 set_mcast_bcast_echo;
3802 	u32 atf_strict_sch;
3803 	u32 atf_sched_duration;
3804 	u32 ant_plzn;
3805 	u32 mgmt_retry_limit;
3806 	u32 sensitivity_level;
3807 	u32 signed_txpower_2g;
3808 	u32 signed_txpower_5g;
3809 	u32 enable_per_tid_amsdu;
3810 	u32 enable_per_tid_ampdu;
3811 	u32 cca_threshold;
3812 	u32 rts_fixed_rate;
3813 	u32 pdev_reset;
3814 	u32 wapi_mbssid_offset;
3815 	u32 arp_srcaddr;
3816 	u32 arp_dstaddr;
3817 	u32 enable_btcoex;
3818 	u32 rfkill_config;
3819 	u32 rfkill_enable;
3820 	u32 peer_stats_info_enable;
3821 };
3822 
3823 #define WMI_PDEV_PARAM_UNSUPPORTED 0
3824 
3825 enum wmi_pdev_param {
3826 	/* TX chain mask */
3827 	WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3828 	/* RX chain mask */
3829 	WMI_PDEV_PARAM_RX_CHAIN_MASK,
3830 	/* TX power limit for 2G Radio */
3831 	WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3832 	/* TX power limit for 5G Radio */
3833 	WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3834 	/* TX power scale */
3835 	WMI_PDEV_PARAM_TXPOWER_SCALE,
3836 	/* Beacon generation mode . 0: host, 1: target   */
3837 	WMI_PDEV_PARAM_BEACON_GEN_MODE,
3838 	/* Beacon generation mode . 0: staggered 1: bursted   */
3839 	WMI_PDEV_PARAM_BEACON_TX_MODE,
3840 	/*
3841 	 * Resource manager off chan mode .
3842 	 * 0: turn off offchan mode. 1: turn on offchan mode
3843 	 */
3844 	WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3845 	/*
3846 	 * Protection mode:
3847 	 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3848 	 */
3849 	WMI_PDEV_PARAM_PROTECTION_MODE,
3850 	/*
3851 	 * Dynamic bandwidth - 0: disable, 1: enable
3852 	 *
3853 	 * When enabled HW rate control tries different bandwidths when
3854 	 * retransmitting frames.
3855 	 */
3856 	WMI_PDEV_PARAM_DYNAMIC_BW,
3857 	/* Non aggregrate/ 11g sw retry threshold.0-disable */
3858 	WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3859 	/* aggregrate sw retry threshold. 0-disable*/
3860 	WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3861 	/* Station kickout threshold (non of consecutive failures).0-disable */
3862 	WMI_PDEV_PARAM_STA_KICKOUT_TH,
3863 	/* Aggerate size scaling configuration per AC */
3864 	WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3865 	/* LTR enable */
3866 	WMI_PDEV_PARAM_LTR_ENABLE,
3867 	/* LTR latency for BE, in us */
3868 	WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3869 	/* LTR latency for BK, in us */
3870 	WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3871 	/* LTR latency for VI, in us */
3872 	WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3873 	/* LTR latency for VO, in us  */
3874 	WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3875 	/* LTR AC latency timeout, in ms */
3876 	WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3877 	/* LTR platform latency override, in us */
3878 	WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3879 	/* LTR-RX override, in us */
3880 	WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3881 	/* Tx activity timeout for LTR, in us */
3882 	WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3883 	/* L1SS state machine enable */
3884 	WMI_PDEV_PARAM_L1SS_ENABLE,
3885 	/* Deep sleep state machine enable */
3886 	WMI_PDEV_PARAM_DSLEEP_ENABLE,
3887 	/* RX buffering flush enable */
3888 	WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3889 	/* RX buffering matermark */
3890 	WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3891 	/* RX buffering timeout enable */
3892 	WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3893 	/* RX buffering timeout value */
3894 	WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3895 	/* pdev level stats update period in ms */
3896 	WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3897 	/* vdev level stats update period in ms */
3898 	WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3899 	/* peer level stats update period in ms */
3900 	WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3901 	/* beacon filter status update period */
3902 	WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3903 	/* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3904 	WMI_PDEV_PARAM_PMF_QOS,
3905 	/* Access category on which ARP frames are sent */
3906 	WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3907 	/* DCS configuration */
3908 	WMI_PDEV_PARAM_DCS,
3909 	/* Enable/Disable ANI on target */
3910 	WMI_PDEV_PARAM_ANI_ENABLE,
3911 	/* configure the ANI polling period */
3912 	WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3913 	/* configure the ANI listening period */
3914 	WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3915 	/* configure OFDM immunity level */
3916 	WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3917 	/* configure CCK immunity level */
3918 	WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3919 	/* Enable/Disable CDD for 1x1 STAs in rate control module */
3920 	WMI_PDEV_PARAM_DYNTXCHAIN,
3921 	/* Enable/Disable proxy STA */
3922 	WMI_PDEV_PARAM_PROXY_STA,
3923 	/* Enable/Disable low power state when all VDEVs are inactive/idle. */
3924 	WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3925 	/* Enable/Disable power gating sleep */
3926 	WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3927 };
3928 
3929 enum wmi_10x_pdev_param {
3930 	/* TX chian mask */
3931 	WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3932 	/* RX chian mask */
3933 	WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3934 	/* TX power limit for 2G Radio */
3935 	WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3936 	/* TX power limit for 5G Radio */
3937 	WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3938 	/* TX power scale */
3939 	WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3940 	/* Beacon generation mode . 0: host, 1: target   */
3941 	WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3942 	/* Beacon generation mode . 0: staggered 1: bursted   */
3943 	WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3944 	/*
3945 	 * Resource manager off chan mode .
3946 	 * 0: turn off offchan mode. 1: turn on offchan mode
3947 	 */
3948 	WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3949 	/*
3950 	 * Protection mode:
3951 	 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3952 	 */
3953 	WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3954 	/* Dynamic bandwidth 0: disable 1: enable */
3955 	WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3956 	/* Non aggregrate/ 11g sw retry threshold.0-disable */
3957 	WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3958 	/* aggregrate sw retry threshold. 0-disable*/
3959 	WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3960 	/* Station kickout threshold (non of consecutive failures).0-disable */
3961 	WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3962 	/* Aggerate size scaling configuration per AC */
3963 	WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3964 	/* LTR enable */
3965 	WMI_10X_PDEV_PARAM_LTR_ENABLE,
3966 	/* LTR latency for BE, in us */
3967 	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
3968 	/* LTR latency for BK, in us */
3969 	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
3970 	/* LTR latency for VI, in us */
3971 	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
3972 	/* LTR latency for VO, in us  */
3973 	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
3974 	/* LTR AC latency timeout, in ms */
3975 	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3976 	/* LTR platform latency override, in us */
3977 	WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3978 	/* LTR-RX override, in us */
3979 	WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
3980 	/* Tx activity timeout for LTR, in us */
3981 	WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3982 	/* L1SS state machine enable */
3983 	WMI_10X_PDEV_PARAM_L1SS_ENABLE,
3984 	/* Deep sleep state machine enable */
3985 	WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
3986 	/* pdev level stats update period in ms */
3987 	WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3988 	/* vdev level stats update period in ms */
3989 	WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3990 	/* peer level stats update period in ms */
3991 	WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3992 	/* beacon filter status update period */
3993 	WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3994 	/* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3995 	WMI_10X_PDEV_PARAM_PMF_QOS,
3996 	/* Access category on which ARP and DHCP frames are sent */
3997 	WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
3998 	/* DCS configuration */
3999 	WMI_10X_PDEV_PARAM_DCS,
4000 	/* Enable/Disable ANI on target */
4001 	WMI_10X_PDEV_PARAM_ANI_ENABLE,
4002 	/* configure the ANI polling period */
4003 	WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
4004 	/* configure the ANI listening period */
4005 	WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
4006 	/* configure OFDM immunity level */
4007 	WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
4008 	/* configure CCK immunity level */
4009 	WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
4010 	/* Enable/Disable CDD for 1x1 STAs in rate control module */
4011 	WMI_10X_PDEV_PARAM_DYNTXCHAIN,
4012 	/* Enable/Disable Fast channel reset*/
4013 	WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
4014 	/* Set Bursting DUR */
4015 	WMI_10X_PDEV_PARAM_BURST_DUR,
4016 	/* Set Bursting Enable*/
4017 	WMI_10X_PDEV_PARAM_BURST_ENABLE,
4018 
4019 	/* following are available as of firmware 10.2 */
4020 	WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4021 	WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
4022 	WMI_10X_PDEV_PARAM_IGMPMLD_TID,
4023 	WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
4024 	WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
4025 	WMI_10X_PDEV_PARAM_RX_FILTER,
4026 	WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
4027 	WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
4028 	WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4029 	WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4030 	WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4031 	WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
4032 	WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
4033 	WMI_10X_PDEV_PARAM_CAL_PERIOD,
4034 	WMI_10X_PDEV_PARAM_ATF_STRICT_SCH,
4035 	WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION,
4036 	WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4037 	WMI_10X_PDEV_PARAM_PDEV_RESET
4038 };
4039 
4040 enum wmi_10_4_pdev_param {
4041 	WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
4042 	WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
4043 	WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
4044 	WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
4045 	WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
4046 	WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
4047 	WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
4048 	WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
4049 	WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
4050 	WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
4051 	WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
4052 	WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
4053 	WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
4054 	WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
4055 	WMI_10_4_PDEV_PARAM_LTR_ENABLE,
4056 	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
4057 	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
4058 	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
4059 	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
4060 	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
4061 	WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
4062 	WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
4063 	WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
4064 	WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
4065 	WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
4066 	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
4067 	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
4068 	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
4069 	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
4070 	WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
4071 	WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
4072 	WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
4073 	WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
4074 	WMI_10_4_PDEV_PARAM_PMF_QOS,
4075 	WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
4076 	WMI_10_4_PDEV_PARAM_DCS,
4077 	WMI_10_4_PDEV_PARAM_ANI_ENABLE,
4078 	WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
4079 	WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
4080 	WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
4081 	WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
4082 	WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
4083 	WMI_10_4_PDEV_PARAM_PROXY_STA,
4084 	WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
4085 	WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
4086 	WMI_10_4_PDEV_PARAM_AGGR_BURST,
4087 	WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
4088 	WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
4089 	WMI_10_4_PDEV_PARAM_BURST_DUR,
4090 	WMI_10_4_PDEV_PARAM_BURST_ENABLE,
4091 	WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4092 	WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
4093 	WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
4094 	WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
4095 	WMI_10_4_PDEV_PARAM_RX_FILTER,
4096 	WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
4097 	WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
4098 	WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4099 	WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4100 	WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4101 	WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
4102 	WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
4103 	WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
4104 	WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
4105 	WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
4106 	WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
4107 	WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
4108 	WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4109 	WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
4110 	WMI_10_4_PDEV_PARAM_EN_STATS,
4111 	WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
4112 	WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
4113 	WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
4114 	WMI_10_4_PDEV_PARAM_DPD_ENABLE,
4115 	WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
4116 	WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
4117 	WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
4118 	WMI_10_4_PDEV_PARAM_ANT_PLZN,
4119 	WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
4120 	WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
4121 	WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
4122 	WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
4123 	WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
4124 	WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
4125 	WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
4126 	WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
4127 	WMI_10_4_PDEV_PARAM_CAL_PERIOD,
4128 	WMI_10_4_PDEV_PARAM_PDEV_RESET,
4129 	WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
4130 	WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
4131 	WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
4132 	WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
4133 	WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
4134 	WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
4135 	WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
4136 	WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
4137 	WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
4138 	WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
4139 	WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
4140 	WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
4141 };
4142 
4143 struct wmi_pdev_set_param_cmd {
4144 	__le32 param_id;
4145 	__le32 param_value;
4146 } __packed;
4147 
4148 struct wmi_pdev_set_base_macaddr_cmd {
4149 	struct wmi_mac_addr mac_addr;
4150 } __packed;
4151 
4152 /* valid period is 1 ~ 60000ms, unit in millisecond */
4153 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
4154 
4155 struct wmi_pdev_get_tpc_config_cmd {
4156 	/* parameter   */
4157 	__le32 param;
4158 } __packed;
4159 
4160 #define WMI_TPC_CONFIG_PARAM		1
4161 #define WMI_TPC_FINAL_RATE_MAX		240
4162 #define WMI_TPC_TX_N_CHAIN		4
4163 #define WMI_TPC_RATE_MAX               (WMI_TPC_TX_N_CHAIN * 65)
4164 #define WMI_TPC_PREAM_TABLE_MAX		10
4165 #define WMI_TPC_FLAG			3
4166 #define WMI_TPC_BUF_SIZE		10
4167 #define WMI_TPC_BEAMFORMING		2
4168 
4169 enum wmi_tpc_table_type {
4170 	WMI_TPC_TABLE_TYPE_CDD = 0,
4171 	WMI_TPC_TABLE_TYPE_STBC = 1,
4172 	WMI_TPC_TABLE_TYPE_TXBF = 2,
4173 };
4174 
4175 enum wmi_tpc_config_event_flag {
4176 	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD	= 0x1,
4177 	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC	= 0x2,
4178 	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF	= 0x4,
4179 };
4180 
4181 struct wmi_pdev_tpc_config_event {
4182 	__le32 reg_domain;
4183 	__le32 chan_freq;
4184 	__le32 phy_mode;
4185 	__le32 twice_antenna_reduction;
4186 	__le32 twice_max_rd_power;
4187 	a_sle32 twice_antenna_gain;
4188 	__le32 power_limit;
4189 	__le32 rate_max;
4190 	__le32 num_tx_chain;
4191 	__le32 ctl;
4192 	__le32 flags;
4193 	s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4194 	s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4195 	s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4196 	s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4197 	u8 rates_array[WMI_TPC_RATE_MAX];
4198 } __packed;
4199 
4200 /* Transmit power scale factor. */
4201 enum wmi_tp_scale {
4202 	WMI_TP_SCALE_MAX    = 0,	/* no scaling (default) */
4203 	WMI_TP_SCALE_50     = 1,	/* 50% of max (-3 dBm) */
4204 	WMI_TP_SCALE_25     = 2,	/* 25% of max (-6 dBm) */
4205 	WMI_TP_SCALE_12     = 3,	/* 12% of max (-9 dBm) */
4206 	WMI_TP_SCALE_MIN    = 4,	/* min, but still on   */
4207 	WMI_TP_SCALE_SIZE   = 5,	/* max num of enum     */
4208 };
4209 
4210 struct wmi_pdev_tpc_final_table_event {
4211 	__le32 reg_domain;
4212 	__le32 chan_freq;
4213 	__le32 phy_mode;
4214 	__le32 twice_antenna_reduction;
4215 	__le32 twice_max_rd_power;
4216 	a_sle32 twice_antenna_gain;
4217 	__le32 power_limit;
4218 	__le32 rate_max;
4219 	__le32 num_tx_chain;
4220 	__le32 ctl;
4221 	__le32 flags;
4222 	s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4223 	s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4224 	s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4225 	s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4226 	u8 rates_array[WMI_TPC_FINAL_RATE_MAX];
4227 	u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN]
4228 	   [WMI_TPC_TX_N_CHAIN];
4229 } __packed;
4230 
4231 struct wmi_pdev_get_tpc_table_cmd {
4232 	__le32 param;
4233 } __packed;
4234 
4235 enum wmi_tpc_pream_2ghz {
4236 	WMI_TPC_PREAM_2GHZ_CCK = 0,
4237 	WMI_TPC_PREAM_2GHZ_OFDM,
4238 	WMI_TPC_PREAM_2GHZ_HT20,
4239 	WMI_TPC_PREAM_2GHZ_HT40,
4240 	WMI_TPC_PREAM_2GHZ_VHT20,
4241 	WMI_TPC_PREAM_2GHZ_VHT40,
4242 	WMI_TPC_PREAM_2GHZ_VHT80,
4243 };
4244 
4245 enum wmi_tpc_pream_5ghz {
4246 	WMI_TPC_PREAM_5GHZ_OFDM = 1,
4247 	WMI_TPC_PREAM_5GHZ_HT20,
4248 	WMI_TPC_PREAM_5GHZ_HT40,
4249 	WMI_TPC_PREAM_5GHZ_VHT20,
4250 	WMI_TPC_PREAM_5GHZ_VHT40,
4251 	WMI_TPC_PREAM_5GHZ_VHT80,
4252 	WMI_TPC_PREAM_5GHZ_HTCUP,
4253 };
4254 
4255 #define	WMI_PEER_PS_STATE_DISABLED	2
4256 
4257 struct wmi_peer_sta_ps_state_chg_event {
4258 	struct wmi_mac_addr peer_macaddr;
4259 	__le32 peer_ps_state;
4260 } __packed;
4261 
4262 struct wmi_pdev_chanlist_update_event {
4263 	/* number of channels */
4264 	__le32 num_chan;
4265 	/* array of channels */
4266 	struct wmi_channel channel_list[1];
4267 } __packed;
4268 
4269 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
4270 
4271 struct wmi_debug_mesg_event {
4272 	/* message buffer, NULL terminated */
4273 	char bufp[WMI_MAX_DEBUG_MESG];
4274 } __packed;
4275 
4276 enum {
4277 	/* P2P device */
4278 	VDEV_SUBTYPE_P2PDEV = 0,
4279 	/* P2P client */
4280 	VDEV_SUBTYPE_P2PCLI,
4281 	/* P2P GO */
4282 	VDEV_SUBTYPE_P2PGO,
4283 	/* BT3.0 HS */
4284 	VDEV_SUBTYPE_BT,
4285 };
4286 
4287 struct wmi_pdev_set_channel_cmd {
4288 	/* idnore power , only use flags , mode and freq */
4289 	struct wmi_channel chan;
4290 } __packed;
4291 
4292 struct wmi_pdev_pktlog_enable_cmd {
4293 	__le32 ev_bitmap;
4294 } __packed;
4295 
4296 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
4297 #define WMI_DSCP_MAP_MAX    (64)
4298 struct wmi_pdev_set_dscp_tid_map_cmd {
4299 	/* map indicating DSCP to TID conversion */
4300 	__le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
4301 } __packed;
4302 
4303 enum mcast_bcast_rate_id {
4304 	WMI_SET_MCAST_RATE,
4305 	WMI_SET_BCAST_RATE
4306 };
4307 
4308 struct mcast_bcast_rate {
4309 	enum mcast_bcast_rate_id rate_id;
4310 	__le32 rate;
4311 } __packed;
4312 
4313 struct wmi_wmm_params {
4314 	__le32 cwmin;
4315 	__le32 cwmax;
4316 	__le32 aifs;
4317 	__le32 txop;
4318 	__le32 acm;
4319 	__le32 no_ack;
4320 } __packed;
4321 
4322 struct wmi_pdev_set_wmm_params {
4323 	struct wmi_wmm_params ac_be;
4324 	struct wmi_wmm_params ac_bk;
4325 	struct wmi_wmm_params ac_vi;
4326 	struct wmi_wmm_params ac_vo;
4327 } __packed;
4328 
4329 struct wmi_wmm_params_arg {
4330 	u32 cwmin;
4331 	u32 cwmax;
4332 	u32 aifs;
4333 	u32 txop;
4334 	u32 acm;
4335 	u32 no_ack;
4336 };
4337 
4338 struct wmi_wmm_params_all_arg {
4339 	struct wmi_wmm_params_arg ac_be;
4340 	struct wmi_wmm_params_arg ac_bk;
4341 	struct wmi_wmm_params_arg ac_vi;
4342 	struct wmi_wmm_params_arg ac_vo;
4343 };
4344 
4345 struct wmi_pdev_stats_tx {
4346 	/* Num HTT cookies queued to dispatch list */
4347 	__le32 comp_queued;
4348 
4349 	/* Num HTT cookies dispatched */
4350 	__le32 comp_delivered;
4351 
4352 	/* Num MSDU queued to WAL */
4353 	__le32 msdu_enqued;
4354 
4355 	/* Num MPDU queue to WAL */
4356 	__le32 mpdu_enqued;
4357 
4358 	/* Num MSDUs dropped by WMM limit */
4359 	__le32 wmm_drop;
4360 
4361 	/* Num Local frames queued */
4362 	__le32 local_enqued;
4363 
4364 	/* Num Local frames done */
4365 	__le32 local_freed;
4366 
4367 	/* Num queued to HW */
4368 	__le32 hw_queued;
4369 
4370 	/* Num PPDU reaped from HW */
4371 	__le32 hw_reaped;
4372 
4373 	/* Num underruns */
4374 	__le32 underrun;
4375 
4376 	/* Num PPDUs cleaned up in TX abort */
4377 	__le32 tx_abort;
4378 
4379 	/* Num MPDUs requeued by SW */
4380 	__le32 mpdus_requeued;
4381 
4382 	/* excessive retries */
4383 	__le32 tx_ko;
4384 
4385 	/* data hw rate code */
4386 	__le32 data_rc;
4387 
4388 	/* Scheduler self triggers */
4389 	__le32 self_triggers;
4390 
4391 	/* frames dropped due to excessive sw retries */
4392 	__le32 sw_retry_failure;
4393 
4394 	/* illegal rate phy errors  */
4395 	__le32 illgl_rate_phy_err;
4396 
4397 	/* wal pdev continuous xretry */
4398 	__le32 pdev_cont_xretry;
4399 
4400 	/* wal pdev continuous xretry */
4401 	__le32 pdev_tx_timeout;
4402 
4403 	/* wal pdev resets  */
4404 	__le32 pdev_resets;
4405 
4406 	/* frames dropped due to non-availability of stateless TIDs */
4407 	__le32 stateless_tid_alloc_failure;
4408 
4409 	__le32 phy_underrun;
4410 
4411 	/* MPDU is more than txop limit */
4412 	__le32 txop_ovf;
4413 } __packed;
4414 
4415 struct wmi_10_4_pdev_stats_tx {
4416 	/* Num HTT cookies queued to dispatch list */
4417 	__le32 comp_queued;
4418 
4419 	/* Num HTT cookies dispatched */
4420 	__le32 comp_delivered;
4421 
4422 	/* Num MSDU queued to WAL */
4423 	__le32 msdu_enqued;
4424 
4425 	/* Num MPDU queue to WAL */
4426 	__le32 mpdu_enqued;
4427 
4428 	/* Num MSDUs dropped by WMM limit */
4429 	__le32 wmm_drop;
4430 
4431 	/* Num Local frames queued */
4432 	__le32 local_enqued;
4433 
4434 	/* Num Local frames done */
4435 	__le32 local_freed;
4436 
4437 	/* Num queued to HW */
4438 	__le32 hw_queued;
4439 
4440 	/* Num PPDU reaped from HW */
4441 	__le32 hw_reaped;
4442 
4443 	/* Num underruns */
4444 	__le32 underrun;
4445 
4446 	/* HW Paused. */
4447 	__le32  hw_paused;
4448 
4449 	/* Num PPDUs cleaned up in TX abort */
4450 	__le32 tx_abort;
4451 
4452 	/* Num MPDUs requeued by SW */
4453 	__le32 mpdus_requeued;
4454 
4455 	/* excessive retries */
4456 	__le32 tx_ko;
4457 
4458 	/* data hw rate code */
4459 	__le32 data_rc;
4460 
4461 	/* Scheduler self triggers */
4462 	__le32 self_triggers;
4463 
4464 	/* frames dropped due to excessive sw retries */
4465 	__le32 sw_retry_failure;
4466 
4467 	/* illegal rate phy errors  */
4468 	__le32 illgl_rate_phy_err;
4469 
4470 	/* wal pdev continuous xretry */
4471 	__le32 pdev_cont_xretry;
4472 
4473 	/* wal pdev tx timeouts */
4474 	__le32 pdev_tx_timeout;
4475 
4476 	/* wal pdev resets  */
4477 	__le32 pdev_resets;
4478 
4479 	/* frames dropped due to non-availability of stateless TIDs */
4480 	__le32 stateless_tid_alloc_failure;
4481 
4482 	__le32 phy_underrun;
4483 
4484 	/* MPDU is more than txop limit */
4485 	__le32 txop_ovf;
4486 
4487 	/* Number of Sequences posted */
4488 	__le32 seq_posted;
4489 
4490 	/* Number of Sequences failed queueing */
4491 	__le32 seq_failed_queueing;
4492 
4493 	/* Number of Sequences completed */
4494 	__le32 seq_completed;
4495 
4496 	/* Number of Sequences restarted */
4497 	__le32 seq_restarted;
4498 
4499 	/* Number of MU Sequences posted */
4500 	__le32 mu_seq_posted;
4501 
4502 	/* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
4503 	__le32 mpdus_sw_flush;
4504 
4505 	/* Num MPDUs filtered by HW, all filter condition (TTL expired) */
4506 	__le32 mpdus_hw_filter;
4507 
4508 	/* Num MPDUs truncated by PDG
4509 	 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
4510 	 */
4511 	__le32 mpdus_truncated;
4512 
4513 	/* Num MPDUs that was tried but didn't receive ACK or BA */
4514 	__le32 mpdus_ack_failed;
4515 
4516 	/* Num MPDUs that was dropped due to expiry. */
4517 	__le32 mpdus_expired;
4518 } __packed;
4519 
4520 struct wmi_pdev_stats_rx {
4521 	/* Cnts any change in ring routing mid-ppdu */
4522 	__le32 mid_ppdu_route_change;
4523 
4524 	/* Total number of statuses processed */
4525 	__le32 status_rcvd;
4526 
4527 	/* Extra frags on rings 0-3 */
4528 	__le32 r0_frags;
4529 	__le32 r1_frags;
4530 	__le32 r2_frags;
4531 	__le32 r3_frags;
4532 
4533 	/* MSDUs / MPDUs delivered to HTT */
4534 	__le32 htt_msdus;
4535 	__le32 htt_mpdus;
4536 
4537 	/* MSDUs / MPDUs delivered to local stack */
4538 	__le32 loc_msdus;
4539 	__le32 loc_mpdus;
4540 
4541 	/* AMSDUs that have more MSDUs than the status ring size */
4542 	__le32 oversize_amsdu;
4543 
4544 	/* Number of PHY errors */
4545 	__le32 phy_errs;
4546 
4547 	/* Number of PHY errors drops */
4548 	__le32 phy_err_drop;
4549 
4550 	/* Number of mpdu errors - FCS, MIC, ENC etc. */
4551 	__le32 mpdu_errs;
4552 } __packed;
4553 
4554 struct wmi_pdev_stats_peer {
4555 	/* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
4556 	__le32 dummy;
4557 } __packed;
4558 
4559 enum wmi_stats_id {
4560 	WMI_STAT_PEER = BIT(0),
4561 	WMI_STAT_AP = BIT(1),
4562 	WMI_STAT_PDEV = BIT(2),
4563 	WMI_STAT_VDEV = BIT(3),
4564 	WMI_STAT_BCNFLT = BIT(4),
4565 	WMI_STAT_VDEV_RATE = BIT(5),
4566 };
4567 
4568 enum wmi_10_4_stats_id {
4569 	WMI_10_4_STAT_PEER		= BIT(0),
4570 	WMI_10_4_STAT_AP		= BIT(1),
4571 	WMI_10_4_STAT_INST		= BIT(2),
4572 	WMI_10_4_STAT_PEER_EXTD		= BIT(3),
4573 	WMI_10_4_STAT_VDEV_EXTD		= BIT(4),
4574 };
4575 
4576 enum wmi_tlv_stats_id {
4577 	WMI_TLV_STAT_PEER	= BIT(0),
4578 	WMI_TLV_STAT_AP		= BIT(1),
4579 	WMI_TLV_STAT_PDEV	= BIT(2),
4580 	WMI_TLV_STAT_VDEV	= BIT(3),
4581 	WMI_TLV_STAT_PEER_EXTD  = BIT(10),
4582 };
4583 
4584 struct wlan_inst_rssi_args {
4585 	__le16 cfg_retry_count;
4586 	__le16 retry_count;
4587 };
4588 
4589 struct wmi_request_stats_cmd {
4590 	__le32 stats_id;
4591 
4592 	__le32 vdev_id;
4593 
4594 	/* peer MAC address */
4595 	struct wmi_mac_addr peer_macaddr;
4596 
4597 	/* Instantaneous RSSI arguments */
4598 	struct wlan_inst_rssi_args inst_rssi_args;
4599 } __packed;
4600 
4601 enum wmi_peer_stats_info_request_type {
4602 	/* request stats of one specified peer */
4603 	WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01,
4604 	/* request stats of all peers belong to specified VDEV */
4605 	WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02,
4606 };
4607 
4608 /* Suspend option */
4609 enum {
4610 	/* suspend */
4611 	WMI_PDEV_SUSPEND,
4612 
4613 	/* suspend and disable all interrupts */
4614 	WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
4615 };
4616 
4617 struct wmi_pdev_suspend_cmd {
4618 	/* suspend option sent to target */
4619 	__le32 suspend_opt;
4620 } __packed;
4621 
4622 struct wmi_stats_event {
4623 	__le32 stats_id; /* WMI_STAT_ */
4624 	/*
4625 	 * number of pdev stats event structures
4626 	 * (wmi_pdev_stats) 0 or 1
4627 	 */
4628 	__le32 num_pdev_stats;
4629 	/*
4630 	 * number of vdev stats event structures
4631 	 * (wmi_vdev_stats) 0 or max vdevs
4632 	 */
4633 	__le32 num_vdev_stats;
4634 	/*
4635 	 * number of peer stats event structures
4636 	 * (wmi_peer_stats) 0 or max peers
4637 	 */
4638 	__le32 num_peer_stats;
4639 	__le32 num_bcnflt_stats;
4640 	/*
4641 	 * followed by
4642 	 *   num_pdev_stats * size of(struct wmi_pdev_stats)
4643 	 *   num_vdev_stats * size of(struct wmi_vdev_stats)
4644 	 *   num_peer_stats * size of(struct wmi_peer_stats)
4645 	 *
4646 	 *  By having a zero sized array, the pointer to data area
4647 	 *  becomes available without increasing the struct size
4648 	 */
4649 	u8 data[];
4650 } __packed;
4651 
4652 struct wmi_10_2_stats_event {
4653 	__le32 stats_id; /* %WMI_REQUEST_ */
4654 	__le32 num_pdev_stats;
4655 	__le32 num_pdev_ext_stats;
4656 	__le32 num_vdev_stats;
4657 	__le32 num_peer_stats;
4658 	__le32 num_bcnflt_stats;
4659 	u8 data[];
4660 } __packed;
4661 
4662 /*
4663  * PDEV statistics
4664  * TODO: add all PDEV stats here
4665  */
4666 struct wmi_pdev_stats_base {
4667 	__le32 chan_nf;
4668 	__le32 tx_frame_count; /* Cycles spent transmitting frames */
4669 	__le32 rx_frame_count; /* Cycles spent receiving frames */
4670 	__le32 rx_clear_count; /* Total channel busy time, evidently */
4671 	__le32 cycle_count; /* Total on-channel time */
4672 	__le32 phy_err_count;
4673 	__le32 chan_tx_pwr;
4674 } __packed;
4675 
4676 struct wmi_pdev_stats {
4677 	struct wmi_pdev_stats_base base;
4678 	struct wmi_pdev_stats_tx tx;
4679 	struct wmi_pdev_stats_rx rx;
4680 	struct wmi_pdev_stats_peer peer;
4681 } __packed;
4682 
4683 struct wmi_pdev_stats_extra {
4684 	__le32 ack_rx_bad;
4685 	__le32 rts_bad;
4686 	__le32 rts_good;
4687 	__le32 fcs_bad;
4688 	__le32 no_beacons;
4689 	__le32 mib_int_count;
4690 } __packed;
4691 
4692 struct wmi_10x_pdev_stats {
4693 	struct wmi_pdev_stats_base base;
4694 	struct wmi_pdev_stats_tx tx;
4695 	struct wmi_pdev_stats_rx rx;
4696 	struct wmi_pdev_stats_peer peer;
4697 	struct wmi_pdev_stats_extra extra;
4698 } __packed;
4699 
4700 struct wmi_pdev_stats_mem {
4701 	__le32 dram_free;
4702 	__le32 iram_free;
4703 } __packed;
4704 
4705 struct wmi_10_2_pdev_stats {
4706 	struct wmi_pdev_stats_base base;
4707 	struct wmi_pdev_stats_tx tx;
4708 	__le32 mc_drop;
4709 	struct wmi_pdev_stats_rx rx;
4710 	__le32 pdev_rx_timeout;
4711 	struct wmi_pdev_stats_mem mem;
4712 	struct wmi_pdev_stats_peer peer;
4713 	struct wmi_pdev_stats_extra extra;
4714 } __packed;
4715 
4716 struct wmi_10_4_pdev_stats {
4717 	struct wmi_pdev_stats_base base;
4718 	struct wmi_10_4_pdev_stats_tx tx;
4719 	struct wmi_pdev_stats_rx rx;
4720 	__le32 rx_ovfl_errs;
4721 	struct wmi_pdev_stats_mem mem;
4722 	__le32 sram_free_size;
4723 	struct wmi_pdev_stats_extra extra;
4724 } __packed;
4725 
4726 /*
4727  * VDEV statistics
4728  */
4729 
4730 #define WMI_VDEV_STATS_FTM_COUNT_VALID	BIT(31)
4731 #define WMI_VDEV_STATS_FTM_COUNT_LSB	0
4732 #define WMI_VDEV_STATS_FTM_COUNT_MASK	0x7fffffff
4733 
4734 struct wmi_vdev_stats {
4735 	__le32 vdev_id;
4736 } __packed;
4737 
4738 struct wmi_vdev_stats_extd {
4739 	__le32 vdev_id;
4740 	__le32 ppdu_aggr_cnt;
4741 	__le32 ppdu_noack;
4742 	__le32 mpdu_queued;
4743 	__le32 ppdu_nonaggr_cnt;
4744 	__le32 mpdu_sw_requeued;
4745 	__le32 mpdu_suc_retry;
4746 	__le32 mpdu_suc_multitry;
4747 	__le32 mpdu_fail_retry;
4748 	__le32 tx_ftm_suc;
4749 	__le32 tx_ftm_suc_retry;
4750 	__le32 tx_ftm_fail;
4751 	__le32 rx_ftmr_cnt;
4752 	__le32 rx_ftmr_dup_cnt;
4753 	__le32 rx_iftmr_cnt;
4754 	__le32 rx_iftmr_dup_cnt;
4755 	__le32 reserved[6];
4756 } __packed;
4757 
4758 /*
4759  * peer statistics.
4760  * TODO: add more stats
4761  */
4762 struct wmi_peer_stats {
4763 	struct wmi_mac_addr peer_macaddr;
4764 	__le32 peer_rssi;
4765 	__le32 peer_tx_rate;
4766 } __packed;
4767 
4768 struct wmi_10x_peer_stats {
4769 	struct wmi_peer_stats old;
4770 	__le32 peer_rx_rate;
4771 } __packed;
4772 
4773 struct wmi_10_2_peer_stats {
4774 	struct wmi_peer_stats old;
4775 	__le32 peer_rx_rate;
4776 	__le32 current_per;
4777 	__le32 retries;
4778 	__le32 tx_rate_count;
4779 	__le32 max_4ms_frame_len;
4780 	__le32 total_sub_frames;
4781 	__le32 tx_bytes;
4782 	__le32 num_pkt_loss_overflow[4];
4783 	__le32 num_pkt_loss_excess_retry[4];
4784 } __packed;
4785 
4786 struct wmi_10_2_4_peer_stats {
4787 	struct wmi_10_2_peer_stats common;
4788 	__le32 peer_rssi_changed;
4789 } __packed;
4790 
4791 struct wmi_10_2_4_ext_peer_stats {
4792 	struct wmi_10_2_peer_stats common;
4793 	__le32 peer_rssi_changed;
4794 	__le32 rx_duration;
4795 } __packed;
4796 
4797 struct wmi_10_4_peer_stats {
4798 	struct wmi_mac_addr peer_macaddr;
4799 	__le32 peer_rssi;
4800 	__le32 peer_rssi_seq_num;
4801 	__le32 peer_tx_rate;
4802 	__le32 peer_rx_rate;
4803 	__le32 current_per;
4804 	__le32 retries;
4805 	__le32 tx_rate_count;
4806 	__le32 max_4ms_frame_len;
4807 	__le32 total_sub_frames;
4808 	__le32 tx_bytes;
4809 	__le32 num_pkt_loss_overflow[4];
4810 	__le32 num_pkt_loss_excess_retry[4];
4811 	__le32 peer_rssi_changed;
4812 } __packed;
4813 
4814 struct wmi_10_4_peer_extd_stats {
4815 	struct wmi_mac_addr peer_macaddr;
4816 	__le32 inactive_time;
4817 	__le32 peer_chain_rssi;
4818 	__le32 rx_duration;
4819 	__le32 reserved[10];
4820 } __packed;
4821 
4822 struct wmi_10_4_bss_bcn_stats {
4823 	__le32 vdev_id;
4824 	__le32 bss_bcns_dropped;
4825 	__le32 bss_bcn_delivered;
4826 } __packed;
4827 
4828 struct wmi_10_4_bss_bcn_filter_stats {
4829 	__le32 bcns_dropped;
4830 	__le32 bcns_delivered;
4831 	__le32 active_filters;
4832 	struct wmi_10_4_bss_bcn_stats bss_stats;
4833 } __packed;
4834 
4835 struct wmi_10_2_pdev_ext_stats {
4836 	__le32 rx_rssi_comb;
4837 	__le32 rx_rssi[4];
4838 	__le32 rx_mcs[10];
4839 	__le32 tx_mcs[10];
4840 	__le32 ack_rssi;
4841 } __packed;
4842 
4843 struct wmi_vdev_create_cmd {
4844 	__le32 vdev_id;
4845 	__le32 vdev_type;
4846 	__le32 vdev_subtype;
4847 	struct wmi_mac_addr vdev_macaddr;
4848 } __packed;
4849 
4850 enum wmi_vdev_type {
4851 	WMI_VDEV_TYPE_AP      = 1,
4852 	WMI_VDEV_TYPE_STA     = 2,
4853 	WMI_VDEV_TYPE_IBSS    = 3,
4854 	WMI_VDEV_TYPE_MONITOR = 4,
4855 };
4856 
4857 enum wmi_vdev_subtype {
4858 	WMI_VDEV_SUBTYPE_NONE,
4859 	WMI_VDEV_SUBTYPE_P2P_DEVICE,
4860 	WMI_VDEV_SUBTYPE_P2P_CLIENT,
4861 	WMI_VDEV_SUBTYPE_P2P_GO,
4862 	WMI_VDEV_SUBTYPE_PROXY_STA,
4863 	WMI_VDEV_SUBTYPE_MESH_11S,
4864 	WMI_VDEV_SUBTYPE_MESH_NON_11S,
4865 };
4866 
4867 enum wmi_vdev_subtype_legacy {
4868 	WMI_VDEV_SUBTYPE_LEGACY_NONE      = 0,
4869 	WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV   = 1,
4870 	WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI   = 2,
4871 	WMI_VDEV_SUBTYPE_LEGACY_P2P_GO    = 3,
4872 	WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
4873 };
4874 
4875 enum wmi_vdev_subtype_10_2_4 {
4876 	WMI_VDEV_SUBTYPE_10_2_4_NONE      = 0,
4877 	WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV   = 1,
4878 	WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI   = 2,
4879 	WMI_VDEV_SUBTYPE_10_2_4_P2P_GO    = 3,
4880 	WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
4881 	WMI_VDEV_SUBTYPE_10_2_4_MESH_11S  = 5,
4882 };
4883 
4884 enum wmi_vdev_subtype_10_4 {
4885 	WMI_VDEV_SUBTYPE_10_4_NONE         = 0,
4886 	WMI_VDEV_SUBTYPE_10_4_P2P_DEV      = 1,
4887 	WMI_VDEV_SUBTYPE_10_4_P2P_CLI      = 2,
4888 	WMI_VDEV_SUBTYPE_10_4_P2P_GO       = 3,
4889 	WMI_VDEV_SUBTYPE_10_4_PROXY_STA    = 4,
4890 	WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
4891 	WMI_VDEV_SUBTYPE_10_4_MESH_11S     = 6,
4892 };
4893 
4894 /* values for vdev_subtype */
4895 
4896 /* values for vdev_start_request flags */
4897 /*
4898  * Indicates that AP VDEV uses hidden ssid. only valid for
4899  *  AP/GO
4900  */
4901 #define WMI_VDEV_START_HIDDEN_SSID  (1 << 0)
4902 /*
4903  * Indicates if robust management frame/management frame
4904  *  protection is enabled. For GO/AP vdevs, it indicates that
4905  *  it may support station/client associations with RMF enabled.
4906  *  For STA/client vdevs, it indicates that sta will
4907  *  associate with AP with RMF enabled.
4908  */
4909 #define WMI_VDEV_START_PMF_ENABLED  (1 << 1)
4910 
4911 struct wmi_p2p_noa_descriptor {
4912 	__le32 type_count; /* 255: continuous schedule, 0: reserved */
4913 	__le32 duration;  /* Absent period duration in micro seconds */
4914 	__le32 interval;   /* Absent period interval in micro seconds */
4915 	__le32 start_time; /* 32 bit tsf time when in starts */
4916 } __packed;
4917 
4918 struct wmi_vdev_start_request_cmd {
4919 	/* WMI channel */
4920 	struct wmi_channel chan;
4921 	/* unique id identifying the VDEV, generated by the caller */
4922 	__le32 vdev_id;
4923 	/* requestor id identifying the caller module */
4924 	__le32 requestor_id;
4925 	/* beacon interval from received beacon */
4926 	__le32 beacon_interval;
4927 	/* DTIM Period from the received beacon */
4928 	__le32 dtim_period;
4929 	/* Flags */
4930 	__le32 flags;
4931 	/* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
4932 	struct wmi_ssid ssid;
4933 	/* beacon/probe response xmit rate. Applicable for SoftAP. */
4934 	__le32 bcn_tx_rate;
4935 	/* beacon/probe response xmit power. Applicable for SoftAP. */
4936 	__le32 bcn_tx_power;
4937 	/* number of p2p NOA descriptor(s) from scan entry */
4938 	__le32 num_noa_descriptors;
4939 	/*
4940 	 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
4941 	 * During CAC, Our HW shouldn't ack ditected frames
4942 	 */
4943 	__le32 disable_hw_ack;
4944 	/* actual p2p NOA descriptor from scan entry */
4945 	struct wmi_p2p_noa_descriptor noa_descriptors[2];
4946 } __packed;
4947 
4948 struct wmi_vdev_restart_request_cmd {
4949 	struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
4950 } __packed;
4951 
4952 struct wmi_vdev_start_request_arg {
4953 	u32 vdev_id;
4954 	struct wmi_channel_arg channel;
4955 	u32 bcn_intval;
4956 	u32 dtim_period;
4957 	u8 *ssid;
4958 	u32 ssid_len;
4959 	u32 bcn_tx_rate;
4960 	u32 bcn_tx_power;
4961 	bool disable_hw_ack;
4962 	bool hidden_ssid;
4963 	bool pmf_enabled;
4964 };
4965 
4966 struct wmi_vdev_delete_cmd {
4967 	/* unique id identifying the VDEV, generated by the caller */
4968 	__le32 vdev_id;
4969 } __packed;
4970 
4971 struct wmi_vdev_up_cmd {
4972 	__le32 vdev_id;
4973 	__le32 vdev_assoc_id;
4974 	struct wmi_mac_addr vdev_bssid;
4975 } __packed;
4976 
4977 struct wmi_vdev_stop_cmd {
4978 	__le32 vdev_id;
4979 } __packed;
4980 
4981 struct wmi_vdev_down_cmd {
4982 	__le32 vdev_id;
4983 } __packed;
4984 
4985 struct wmi_vdev_standby_response_cmd {
4986 	/* unique id identifying the VDEV, generated by the caller */
4987 	__le32 vdev_id;
4988 } __packed;
4989 
4990 struct wmi_vdev_resume_response_cmd {
4991 	/* unique id identifying the VDEV, generated by the caller */
4992 	__le32 vdev_id;
4993 } __packed;
4994 
4995 struct wmi_vdev_set_param_cmd {
4996 	__le32 vdev_id;
4997 	__le32 param_id;
4998 	__le32 param_value;
4999 } __packed;
5000 
5001 #define WMI_MAX_KEY_INDEX   3
5002 #define WMI_MAX_KEY_LEN     32
5003 
5004 #define WMI_KEY_PAIRWISE 0x00
5005 #define WMI_KEY_GROUP    0x01
5006 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
5007 
5008 struct wmi_key_seq_counter {
5009 	__le32 key_seq_counter_l;
5010 	__le32 key_seq_counter_h;
5011 } __packed;
5012 
5013 enum wmi_cipher_suites {
5014 	WMI_CIPHER_NONE,
5015 	WMI_CIPHER_WEP,
5016 	WMI_CIPHER_TKIP,
5017 	WMI_CIPHER_AES_OCB,
5018 	WMI_CIPHER_AES_CCM,
5019 	WMI_CIPHER_WAPI,
5020 	WMI_CIPHER_CKIP,
5021 	WMI_CIPHER_AES_CMAC,
5022 	WMI_CIPHER_AES_GCM,
5023 };
5024 
5025 enum wmi_tlv_cipher_suites {
5026 	WMI_TLV_CIPHER_NONE,
5027 	WMI_TLV_CIPHER_WEP,
5028 	WMI_TLV_CIPHER_TKIP,
5029 	WMI_TLV_CIPHER_AES_OCB,
5030 	WMI_TLV_CIPHER_AES_CCM,
5031 	WMI_TLV_CIPHER_WAPI,
5032 	WMI_TLV_CIPHER_CKIP,
5033 	WMI_TLV_CIPHER_AES_CMAC,
5034 	WMI_TLV_CIPHER_ANY,
5035 	WMI_TLV_CIPHER_AES_GCM,
5036 };
5037 
5038 struct wmi_vdev_install_key_cmd {
5039 	__le32 vdev_id;
5040 	struct wmi_mac_addr peer_macaddr;
5041 	__le32 key_idx;
5042 	__le32 key_flags;
5043 	__le32 key_cipher; /* %WMI_CIPHER_ */
5044 	struct wmi_key_seq_counter key_rsc_counter;
5045 	struct wmi_key_seq_counter key_global_rsc_counter;
5046 	struct wmi_key_seq_counter key_tsc_counter;
5047 	u8 wpi_key_rsc_counter[16];
5048 	u8 wpi_key_tsc_counter[16];
5049 	__le32 key_len;
5050 	__le32 key_txmic_len;
5051 	__le32 key_rxmic_len;
5052 
5053 	/* contains key followed by tx mic followed by rx mic */
5054 	u8 key_data[];
5055 } __packed;
5056 
5057 struct wmi_vdev_install_key_arg {
5058 	u32 vdev_id;
5059 	const u8 *macaddr;
5060 	u32 key_idx;
5061 	u32 key_flags;
5062 	u32 key_cipher;
5063 	u32 key_len;
5064 	u32 key_txmic_len;
5065 	u32 key_rxmic_len;
5066 	const void *key_data;
5067 };
5068 
5069 /*
5070  * vdev fixed rate format:
5071  * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
5072  * - nss      - b5:b4 - ss number (0 mean 1ss)
5073  * - rate_mcs - b3:b0 - as below
5074  *    CCK:  0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
5075  *          4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
5076  *    OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
5077  *          4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
5078  *    HT/VHT: MCS index
5079  */
5080 
5081 /* Preamble types to be used with VDEV fixed rate configuration */
5082 enum wmi_rate_preamble {
5083 	WMI_RATE_PREAMBLE_OFDM,
5084 	WMI_RATE_PREAMBLE_CCK,
5085 	WMI_RATE_PREAMBLE_HT,
5086 	WMI_RATE_PREAMBLE_VHT,
5087 };
5088 
5089 #define ATH10K_HW_NSS(rate)		(1 + (((rate) >> 4) & 0x3))
5090 #define ATH10K_HW_PREAMBLE(rate)	(((rate) >> 6) & 0x3)
5091 #define ATH10K_HW_MCS_RATE(rate)	((rate) & 0xf)
5092 #define ATH10K_HW_LEGACY_RATE(rate)	((rate) & 0x3f)
5093 #define ATH10K_HW_BW(flags)		(((flags) >> 3) & 0x3)
5094 #define ATH10K_HW_GI(flags)		(((flags) >> 5) & 0x1)
5095 #define ATH10K_HW_RATECODE(rate, nss, preamble) \
5096 	(((preamble) << 6) | ((nss) << 4) | (rate))
5097 #define ATH10K_HW_AMPDU(flags)		((flags) & 0x1)
5098 #define ATH10K_HW_BA_FAIL(flags)	(((flags) >> 1) & 0x3)
5099 #define ATH10K_FW_SKIPPED_RATE_CTRL(flags)	(((flags) >> 6) & 0x1)
5100 
5101 #define ATH10K_VHT_MCS_NUM	10
5102 #define ATH10K_BW_NUM		6
5103 #define ATH10K_NSS_NUM		4
5104 #define ATH10K_LEGACY_NUM	12
5105 #define ATH10K_GI_NUM		2
5106 #define ATH10K_HT_MCS_NUM	32
5107 #define ATH10K_RATE_TABLE_NUM	320
5108 #define ATH10K_RATE_INFO_FLAGS_SGI_BIT	2
5109 
5110 /* Value to disable fixed rate setting */
5111 #define WMI_FIXED_RATE_NONE    (0xff)
5112 
5113 struct wmi_peer_param_map {
5114 	u32 smps_state;
5115 	u32 ampdu;
5116 	u32 authorize;
5117 	u32 chan_width;
5118 	u32 nss;
5119 	u32 use_4addr;
5120 	u32 membership;
5121 	u32 use_fixed_power;
5122 	u32 user_pos;
5123 	u32 crit_proto_hint_enabled;
5124 	u32 tx_fail_cnt_thr;
5125 	u32 set_hw_retry_cts2s;
5126 	u32 ibss_atim_win_len;
5127 	u32 debug;
5128 	u32 phymode;
5129 	u32 dummy_var;
5130 };
5131 
5132 struct wmi_vdev_param_map {
5133 	u32 rts_threshold;
5134 	u32 fragmentation_threshold;
5135 	u32 beacon_interval;
5136 	u32 listen_interval;
5137 	u32 multicast_rate;
5138 	u32 mgmt_tx_rate;
5139 	u32 slot_time;
5140 	u32 preamble;
5141 	u32 swba_time;
5142 	u32 wmi_vdev_stats_update_period;
5143 	u32 wmi_vdev_pwrsave_ageout_time;
5144 	u32 wmi_vdev_host_swba_interval;
5145 	u32 dtim_period;
5146 	u32 wmi_vdev_oc_scheduler_air_time_limit;
5147 	u32 wds;
5148 	u32 atim_window;
5149 	u32 bmiss_count_max;
5150 	u32 bmiss_first_bcnt;
5151 	u32 bmiss_final_bcnt;
5152 	u32 feature_wmm;
5153 	u32 chwidth;
5154 	u32 chextoffset;
5155 	u32 disable_htprotection;
5156 	u32 sta_quickkickout;
5157 	u32 mgmt_rate;
5158 	u32 protection_mode;
5159 	u32 fixed_rate;
5160 	u32 sgi;
5161 	u32 ldpc;
5162 	u32 tx_stbc;
5163 	u32 rx_stbc;
5164 	u32 intra_bss_fwd;
5165 	u32 def_keyid;
5166 	u32 nss;
5167 	u32 bcast_data_rate;
5168 	u32 mcast_data_rate;
5169 	u32 mcast_indicate;
5170 	u32 dhcp_indicate;
5171 	u32 unknown_dest_indicate;
5172 	u32 ap_keepalive_min_idle_inactive_time_secs;
5173 	u32 ap_keepalive_max_idle_inactive_time_secs;
5174 	u32 ap_keepalive_max_unresponsive_time_secs;
5175 	u32 ap_enable_nawds;
5176 	u32 mcast2ucast_set;
5177 	u32 enable_rtscts;
5178 	u32 txbf;
5179 	u32 packet_powersave;
5180 	u32 drop_unencry;
5181 	u32 tx_encap_type;
5182 	u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
5183 	u32 rc_num_retries;
5184 	u32 cabq_maxdur;
5185 	u32 mfptest_set;
5186 	u32 rts_fixed_rate;
5187 	u32 vht_sgimask;
5188 	u32 vht80_ratemask;
5189 	u32 early_rx_adjust_enable;
5190 	u32 early_rx_tgt_bmiss_num;
5191 	u32 early_rx_bmiss_sample_cycle;
5192 	u32 early_rx_slop_step;
5193 	u32 early_rx_init_slop;
5194 	u32 early_rx_adjust_pause;
5195 	u32 proxy_sta;
5196 	u32 meru_vc;
5197 	u32 rx_decap_type;
5198 	u32 bw_nss_ratemask;
5199 	u32 inc_tsf;
5200 	u32 dec_tsf;
5201 	u32 disable_4addr_src_lrn;
5202 	u32 rtt_responder_role;
5203 };
5204 
5205 #define WMI_VDEV_PARAM_UNSUPPORTED 0
5206 
5207 /* the definition of different VDEV parameters */
5208 enum wmi_vdev_param {
5209 	/* RTS Threshold */
5210 	WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5211 	/* Fragmentation threshold */
5212 	WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5213 	/* beacon interval in TUs */
5214 	WMI_VDEV_PARAM_BEACON_INTERVAL,
5215 	/* Listen interval in TUs */
5216 	WMI_VDEV_PARAM_LISTEN_INTERVAL,
5217 	/* multicast rate in Mbps */
5218 	WMI_VDEV_PARAM_MULTICAST_RATE,
5219 	/* management frame rate in Mbps */
5220 	WMI_VDEV_PARAM_MGMT_TX_RATE,
5221 	/* slot time (long vs short) */
5222 	WMI_VDEV_PARAM_SLOT_TIME,
5223 	/* preamble (long vs short) */
5224 	WMI_VDEV_PARAM_PREAMBLE,
5225 	/* SWBA time (time before tbtt in msec) */
5226 	WMI_VDEV_PARAM_SWBA_TIME,
5227 	/* time period for updating VDEV stats */
5228 	WMI_VDEV_STATS_UPDATE_PERIOD,
5229 	/* age out time in msec for frames queued for station in power save */
5230 	WMI_VDEV_PWRSAVE_AGEOUT_TIME,
5231 	/*
5232 	 * Host SWBA interval (time in msec before tbtt for SWBA event
5233 	 * generation).
5234 	 */
5235 	WMI_VDEV_HOST_SWBA_INTERVAL,
5236 	/* DTIM period (specified in units of num beacon intervals) */
5237 	WMI_VDEV_PARAM_DTIM_PERIOD,
5238 	/*
5239 	 * scheduler air time limit for this VDEV. used by off chan
5240 	 * scheduler.
5241 	 */
5242 	WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5243 	/* enable/disable WDS for this VDEV  */
5244 	WMI_VDEV_PARAM_WDS,
5245 	/* ATIM Window */
5246 	WMI_VDEV_PARAM_ATIM_WINDOW,
5247 	/* BMISS max */
5248 	WMI_VDEV_PARAM_BMISS_COUNT_MAX,
5249 	/* BMISS first time */
5250 	WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
5251 	/* BMISS final time */
5252 	WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
5253 	/* WMM enables/disabled */
5254 	WMI_VDEV_PARAM_FEATURE_WMM,
5255 	/* Channel width */
5256 	WMI_VDEV_PARAM_CHWIDTH,
5257 	/* Channel Offset */
5258 	WMI_VDEV_PARAM_CHEXTOFFSET,
5259 	/* Disable HT Protection */
5260 	WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
5261 	/* Quick STA Kickout */
5262 	WMI_VDEV_PARAM_STA_QUICKKICKOUT,
5263 	/* Rate to be used with Management frames */
5264 	WMI_VDEV_PARAM_MGMT_RATE,
5265 	/* Protection Mode */
5266 	WMI_VDEV_PARAM_PROTECTION_MODE,
5267 	/* Fixed rate setting */
5268 	WMI_VDEV_PARAM_FIXED_RATE,
5269 	/* Short GI Enable/Disable */
5270 	WMI_VDEV_PARAM_SGI,
5271 	/* Enable LDPC */
5272 	WMI_VDEV_PARAM_LDPC,
5273 	/* Enable Tx STBC */
5274 	WMI_VDEV_PARAM_TX_STBC,
5275 	/* Enable Rx STBC */
5276 	WMI_VDEV_PARAM_RX_STBC,
5277 	/* Intra BSS forwarding  */
5278 	WMI_VDEV_PARAM_INTRA_BSS_FWD,
5279 	/* Setting Default xmit key for Vdev */
5280 	WMI_VDEV_PARAM_DEF_KEYID,
5281 	/* NSS width */
5282 	WMI_VDEV_PARAM_NSS,
5283 	/* Set the custom rate for the broadcast data frames */
5284 	WMI_VDEV_PARAM_BCAST_DATA_RATE,
5285 	/* Set the custom rate (rate-code) for multicast data frames */
5286 	WMI_VDEV_PARAM_MCAST_DATA_RATE,
5287 	/* Tx multicast packet indicate Enable/Disable */
5288 	WMI_VDEV_PARAM_MCAST_INDICATE,
5289 	/* Tx DHCP packet indicate Enable/Disable */
5290 	WMI_VDEV_PARAM_DHCP_INDICATE,
5291 	/* Enable host inspection of Tx unicast packet to unknown destination */
5292 	WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5293 
5294 	/* The minimum amount of time AP begins to consider STA inactive */
5295 	WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5296 
5297 	/*
5298 	 * An associated STA is considered inactive when there is no recent
5299 	 * TX/RX activity and no downlink frames are buffered for it. Once a
5300 	 * STA exceeds the maximum idle inactive time, the AP will send an
5301 	 * 802.11 data-null as a keep alive to verify the STA is still
5302 	 * associated. If the STA does ACK the data-null, or if the data-null
5303 	 * is buffered and the STA does not retrieve it, the STA will be
5304 	 * considered unresponsive
5305 	 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5306 	 */
5307 	WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5308 
5309 	/*
5310 	 * An associated STA is considered unresponsive if there is no recent
5311 	 * TX/RX activity and downlink frames are buffered for it. Once a STA
5312 	 * exceeds the maximum unresponsive time, the AP will send a
5313 	 * WMI_STA_KICKOUT event to the host so the STA can be deleted.
5314 	 */
5315 	WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5316 
5317 	/* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5318 	WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
5319 	/* Enable/Disable RTS-CTS */
5320 	WMI_VDEV_PARAM_ENABLE_RTSCTS,
5321 	/* Enable TXBFee/er */
5322 	WMI_VDEV_PARAM_TXBF,
5323 
5324 	/* Set packet power save */
5325 	WMI_VDEV_PARAM_PACKET_POWERSAVE,
5326 
5327 	/*
5328 	 * Drops un-encrypted packets if eceived in an encrypted connection
5329 	 * otherwise forwards to host.
5330 	 */
5331 	WMI_VDEV_PARAM_DROP_UNENCRY,
5332 
5333 	/*
5334 	 * Set the encapsulation type for frames.
5335 	 */
5336 	WMI_VDEV_PARAM_TX_ENCAP_TYPE,
5337 };
5338 
5339 /* the definition of different VDEV parameters */
5340 enum wmi_10x_vdev_param {
5341 	/* RTS Threshold */
5342 	WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5343 	/* Fragmentation threshold */
5344 	WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5345 	/* beacon interval in TUs */
5346 	WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
5347 	/* Listen interval in TUs */
5348 	WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
5349 	/* multicast rate in Mbps */
5350 	WMI_10X_VDEV_PARAM_MULTICAST_RATE,
5351 	/* management frame rate in Mbps */
5352 	WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
5353 	/* slot time (long vs short) */
5354 	WMI_10X_VDEV_PARAM_SLOT_TIME,
5355 	/* preamble (long vs short) */
5356 	WMI_10X_VDEV_PARAM_PREAMBLE,
5357 	/* SWBA time (time before tbtt in msec) */
5358 	WMI_10X_VDEV_PARAM_SWBA_TIME,
5359 	/* time period for updating VDEV stats */
5360 	WMI_10X_VDEV_STATS_UPDATE_PERIOD,
5361 	/* age out time in msec for frames queued for station in power save */
5362 	WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
5363 	/*
5364 	 * Host SWBA interval (time in msec before tbtt for SWBA event
5365 	 * generation).
5366 	 */
5367 	WMI_10X_VDEV_HOST_SWBA_INTERVAL,
5368 	/* DTIM period (specified in units of num beacon intervals) */
5369 	WMI_10X_VDEV_PARAM_DTIM_PERIOD,
5370 	/*
5371 	 * scheduler air time limit for this VDEV. used by off chan
5372 	 * scheduler.
5373 	 */
5374 	WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5375 	/* enable/disable WDS for this VDEV  */
5376 	WMI_10X_VDEV_PARAM_WDS,
5377 	/* ATIM Window */
5378 	WMI_10X_VDEV_PARAM_ATIM_WINDOW,
5379 	/* BMISS max */
5380 	WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
5381 	/* WMM enables/disabled */
5382 	WMI_10X_VDEV_PARAM_FEATURE_WMM,
5383 	/* Channel width */
5384 	WMI_10X_VDEV_PARAM_CHWIDTH,
5385 	/* Channel Offset */
5386 	WMI_10X_VDEV_PARAM_CHEXTOFFSET,
5387 	/* Disable HT Protection */
5388 	WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
5389 	/* Quick STA Kickout */
5390 	WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
5391 	/* Rate to be used with Management frames */
5392 	WMI_10X_VDEV_PARAM_MGMT_RATE,
5393 	/* Protection Mode */
5394 	WMI_10X_VDEV_PARAM_PROTECTION_MODE,
5395 	/* Fixed rate setting */
5396 	WMI_10X_VDEV_PARAM_FIXED_RATE,
5397 	/* Short GI Enable/Disable */
5398 	WMI_10X_VDEV_PARAM_SGI,
5399 	/* Enable LDPC */
5400 	WMI_10X_VDEV_PARAM_LDPC,
5401 	/* Enable Tx STBC */
5402 	WMI_10X_VDEV_PARAM_TX_STBC,
5403 	/* Enable Rx STBC */
5404 	WMI_10X_VDEV_PARAM_RX_STBC,
5405 	/* Intra BSS forwarding  */
5406 	WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
5407 	/* Setting Default xmit key for Vdev */
5408 	WMI_10X_VDEV_PARAM_DEF_KEYID,
5409 	/* NSS width */
5410 	WMI_10X_VDEV_PARAM_NSS,
5411 	/* Set the custom rate for the broadcast data frames */
5412 	WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
5413 	/* Set the custom rate (rate-code) for multicast data frames */
5414 	WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
5415 	/* Tx multicast packet indicate Enable/Disable */
5416 	WMI_10X_VDEV_PARAM_MCAST_INDICATE,
5417 	/* Tx DHCP packet indicate Enable/Disable */
5418 	WMI_10X_VDEV_PARAM_DHCP_INDICATE,
5419 	/* Enable host inspection of Tx unicast packet to unknown destination */
5420 	WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5421 
5422 	/* The minimum amount of time AP begins to consider STA inactive */
5423 	WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5424 
5425 	/*
5426 	 * An associated STA is considered inactive when there is no recent
5427 	 * TX/RX activity and no downlink frames are buffered for it. Once a
5428 	 * STA exceeds the maximum idle inactive time, the AP will send an
5429 	 * 802.11 data-null as a keep alive to verify the STA is still
5430 	 * associated. If the STA does ACK the data-null, or if the data-null
5431 	 * is buffered and the STA does not retrieve it, the STA will be
5432 	 * considered unresponsive
5433 	 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5434 	 */
5435 	WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5436 
5437 	/*
5438 	 * An associated STA is considered unresponsive if there is no recent
5439 	 * TX/RX activity and downlink frames are buffered for it. Once a STA
5440 	 * exceeds the maximum unresponsive time, the AP will send a
5441 	 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted.
5442 	 */
5443 	WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5444 
5445 	/* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5446 	WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
5447 
5448 	WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
5449 	/* Enable/Disable RTS-CTS */
5450 	WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
5451 
5452 	WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5453 
5454 	/* following are available as of firmware 10.2 */
5455 	WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
5456 	WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
5457 	WMI_10X_VDEV_PARAM_MFPTEST_SET,
5458 	WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
5459 	WMI_10X_VDEV_PARAM_VHT_SGIMASK,
5460 	WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
5461 	WMI_10X_VDEV_PARAM_TSF_INCREMENT,
5462 };
5463 
5464 enum wmi_10_4_vdev_param {
5465 	WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5466 	WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5467 	WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
5468 	WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
5469 	WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
5470 	WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
5471 	WMI_10_4_VDEV_PARAM_SLOT_TIME,
5472 	WMI_10_4_VDEV_PARAM_PREAMBLE,
5473 	WMI_10_4_VDEV_PARAM_SWBA_TIME,
5474 	WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
5475 	WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
5476 	WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
5477 	WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
5478 	WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5479 	WMI_10_4_VDEV_PARAM_WDS,
5480 	WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
5481 	WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
5482 	WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
5483 	WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
5484 	WMI_10_4_VDEV_PARAM_FEATURE_WMM,
5485 	WMI_10_4_VDEV_PARAM_CHWIDTH,
5486 	WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
5487 	WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
5488 	WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
5489 	WMI_10_4_VDEV_PARAM_MGMT_RATE,
5490 	WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
5491 	WMI_10_4_VDEV_PARAM_FIXED_RATE,
5492 	WMI_10_4_VDEV_PARAM_SGI,
5493 	WMI_10_4_VDEV_PARAM_LDPC,
5494 	WMI_10_4_VDEV_PARAM_TX_STBC,
5495 	WMI_10_4_VDEV_PARAM_RX_STBC,
5496 	WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
5497 	WMI_10_4_VDEV_PARAM_DEF_KEYID,
5498 	WMI_10_4_VDEV_PARAM_NSS,
5499 	WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
5500 	WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
5501 	WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
5502 	WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
5503 	WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5504 	WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5505 	WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5506 	WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5507 	WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
5508 	WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
5509 	WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
5510 	WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
5511 	WMI_10_4_VDEV_PARAM_TXBF,
5512 	WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
5513 	WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
5514 	WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
5515 	WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5516 	WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
5517 	WMI_10_4_VDEV_PARAM_MFPTEST_SET,
5518 	WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
5519 	WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
5520 	WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
5521 	WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
5522 	WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
5523 	WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
5524 	WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
5525 	WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
5526 	WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
5527 	WMI_10_4_VDEV_PARAM_PROXY_STA,
5528 	WMI_10_4_VDEV_PARAM_MERU_VC,
5529 	WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
5530 	WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
5531 	WMI_10_4_VDEV_PARAM_SENSOR_AP,
5532 	WMI_10_4_VDEV_PARAM_BEACON_RATE,
5533 	WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,
5534 	WMI_10_4_VDEV_PARAM_STA_KICKOUT,
5535 	WMI_10_4_VDEV_PARAM_CAPABILITIES,
5536 	WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
5537 	WMI_10_4_VDEV_PARAM_RX_FILTER,
5538 	WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,
5539 	WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
5540 	WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
5541 	WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
5542 	WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE,
5543 	WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC,
5544 	WMI_10_4_VDEV_PARAM_NSS_VHT160,
5545 	WMI_10_4_VDEV_PARAM_NSS_VHT80_80,
5546 	WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC,
5547 	WMI_10_4_VDEV_PARAM_DISABLE_CABQ,
5548 	WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE,
5549 	WMI_10_4_VDEV_PARAM_TX_POWER,
5550 	WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
5551 	WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN,
5552 };
5553 
5554 #define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1
5555 
5556 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
5557 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
5558 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
5559 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
5560 
5561 #define WMI_TXBF_STS_CAP_OFFSET_LSB	4
5562 #define WMI_TXBF_STS_CAP_OFFSET_MASK	0x70
5563 #define WMI_TXBF_CONF_IMPLICIT_BF       BIT(7)
5564 #define WMI_BF_SOUND_DIM_OFFSET_LSB	8
5565 #define WMI_BF_SOUND_DIM_OFFSET_MASK	0xf00
5566 
5567 /* slot time long */
5568 #define WMI_VDEV_SLOT_TIME_LONG		0x1
5569 /* slot time short */
5570 #define WMI_VDEV_SLOT_TIME_SHORT	0x2
5571 /* preablbe long */
5572 #define WMI_VDEV_PREAMBLE_LONG		0x1
5573 /* preablbe short */
5574 #define WMI_VDEV_PREAMBLE_SHORT		0x2
5575 
5576 enum wmi_start_event_param {
5577 	WMI_VDEV_RESP_START_EVENT = 0,
5578 	WMI_VDEV_RESP_RESTART_EVENT,
5579 };
5580 
5581 struct wmi_vdev_start_response_event {
5582 	__le32 vdev_id;
5583 	__le32 req_id;
5584 	__le32 resp_type; /* %WMI_VDEV_RESP_ */
5585 	__le32 status;
5586 } __packed;
5587 
5588 struct wmi_vdev_standby_req_event {
5589 	/* unique id identifying the VDEV, generated by the caller */
5590 	__le32 vdev_id;
5591 } __packed;
5592 
5593 struct wmi_vdev_resume_req_event {
5594 	/* unique id identifying the VDEV, generated by the caller */
5595 	__le32 vdev_id;
5596 } __packed;
5597 
5598 struct wmi_vdev_stopped_event {
5599 	/* unique id identifying the VDEV, generated by the caller */
5600 	__le32 vdev_id;
5601 } __packed;
5602 
5603 /*
5604  * common structure used for simple events
5605  * (stopped, resume_req, standby response)
5606  */
5607 struct wmi_vdev_simple_event {
5608 	/* unique id identifying the VDEV, generated by the caller */
5609 	__le32 vdev_id;
5610 } __packed;
5611 
5612 /* VDEV start response status codes */
5613 /* VDEV successfully started */
5614 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS	0x0
5615 
5616 /* requested VDEV not found */
5617 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID	0x1
5618 
5619 /* unsupported VDEV combination */
5620 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED	0x2
5621 
5622 /* TODO: please add more comments if you have in-depth information */
5623 struct wmi_vdev_spectral_conf_cmd {
5624 	__le32 vdev_id;
5625 
5626 	/* number of fft samples to send (0 for infinite) */
5627 	__le32 scan_count;
5628 	__le32 scan_period;
5629 	__le32 scan_priority;
5630 
5631 	/* number of bins in the FFT: 2^(fft_size - bin_scale) */
5632 	__le32 scan_fft_size;
5633 	__le32 scan_gc_ena;
5634 	__le32 scan_restart_ena;
5635 	__le32 scan_noise_floor_ref;
5636 	__le32 scan_init_delay;
5637 	__le32 scan_nb_tone_thr;
5638 	__le32 scan_str_bin_thr;
5639 	__le32 scan_wb_rpt_mode;
5640 	__le32 scan_rssi_rpt_mode;
5641 	__le32 scan_rssi_thr;
5642 	__le32 scan_pwr_format;
5643 
5644 	/* rpt_mode: Format of FFT report to software for spectral scan
5645 	 * triggered FFTs:
5646 	 *	0: No FFT report (only spectral scan summary report)
5647 	 *	1: 2-dword summary of metrics for each completed FFT + spectral
5648 	 *	   scan	summary report
5649 	 *	2: 2-dword summary of metrics for each completed FFT +
5650 	 *	   1x- oversampled bins(in-band) per FFT + spectral scan summary
5651 	 *	   report
5652 	 *	3: 2-dword summary of metrics for each completed FFT +
5653 	 *	   2x- oversampled bins	(all) per FFT + spectral scan summary
5654 	 */
5655 	__le32 scan_rpt_mode;
5656 	__le32 scan_bin_scale;
5657 	__le32 scan_dbm_adj;
5658 	__le32 scan_chn_mask;
5659 } __packed;
5660 
5661 struct wmi_vdev_spectral_conf_arg {
5662 	u32 vdev_id;
5663 	u32 scan_count;
5664 	u32 scan_period;
5665 	u32 scan_priority;
5666 	u32 scan_fft_size;
5667 	u32 scan_gc_ena;
5668 	u32 scan_restart_ena;
5669 	u32 scan_noise_floor_ref;
5670 	u32 scan_init_delay;
5671 	u32 scan_nb_tone_thr;
5672 	u32 scan_str_bin_thr;
5673 	u32 scan_wb_rpt_mode;
5674 	u32 scan_rssi_rpt_mode;
5675 	u32 scan_rssi_thr;
5676 	u32 scan_pwr_format;
5677 	u32 scan_rpt_mode;
5678 	u32 scan_bin_scale;
5679 	u32 scan_dbm_adj;
5680 	u32 scan_chn_mask;
5681 };
5682 
5683 #define WMI_SPECTRAL_ENABLE_DEFAULT              0
5684 #define WMI_SPECTRAL_COUNT_DEFAULT               0
5685 #define WMI_SPECTRAL_PERIOD_DEFAULT             35
5686 #define WMI_SPECTRAL_PRIORITY_DEFAULT            1
5687 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT            7
5688 #define WMI_SPECTRAL_GC_ENA_DEFAULT              1
5689 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT         0
5690 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT   -96
5691 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT         80
5692 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT        12
5693 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT         8
5694 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT         0
5695 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT       0
5696 #define WMI_SPECTRAL_RSSI_THR_DEFAULT         0xf0
5697 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT          0
5698 #define WMI_SPECTRAL_RPT_MODE_DEFAULT            2
5699 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT           1
5700 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT             1
5701 #define WMI_SPECTRAL_CHN_MASK_DEFAULT            1
5702 
5703 struct wmi_vdev_spectral_enable_cmd {
5704 	__le32 vdev_id;
5705 	__le32 trigger_cmd;
5706 	__le32 enable_cmd;
5707 } __packed;
5708 
5709 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER  1
5710 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR    2
5711 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE    1
5712 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE   2
5713 
5714 /* Beacon processing related command and event structures */
5715 struct wmi_bcn_tx_hdr {
5716 	__le32 vdev_id;
5717 	__le32 tx_rate;
5718 	__le32 tx_power;
5719 	__le32 bcn_len;
5720 } __packed;
5721 
5722 struct wmi_bcn_tx_cmd {
5723 	struct wmi_bcn_tx_hdr hdr;
5724 	u8 *bcn[];
5725 } __packed;
5726 
5727 struct wmi_bcn_tx_arg {
5728 	u32 vdev_id;
5729 	u32 tx_rate;
5730 	u32 tx_power;
5731 	u32 bcn_len;
5732 	const void *bcn;
5733 };
5734 
5735 enum wmi_bcn_tx_ref_flags {
5736 	WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
5737 	WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
5738 };
5739 
5740 /* TODO: It is unclear why "no antenna" works while any other seemingly valid
5741  * chainmask yields no beacons on the air at all.
5742  */
5743 #define WMI_BCN_TX_REF_DEF_ANTENNA 0
5744 
5745 struct wmi_bcn_tx_ref_cmd {
5746 	__le32 vdev_id;
5747 	__le32 data_len;
5748 	/* physical address of the frame - dma pointer */
5749 	__le32 data_ptr;
5750 	/* id for host to track */
5751 	__le32 msdu_id;
5752 	/* frame ctrl to setup PPDU desc */
5753 	__le32 frame_control;
5754 	/* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
5755 	__le32 flags;
5756 	/* introduced in 10.2 */
5757 	__le32 antenna_mask;
5758 } __packed;
5759 
5760 /* Beacon filter */
5761 #define WMI_BCN_FILTER_ALL   0 /* Filter all beacons */
5762 #define WMI_BCN_FILTER_NONE  1 /* Pass all beacons */
5763 #define WMI_BCN_FILTER_RSSI  2 /* Pass Beacons RSSI >= RSSI threshold */
5764 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
5765 #define WMI_BCN_FILTER_SSID  4 /* Pass Beacons with matching SSID */
5766 
5767 struct wmi_bcn_filter_rx_cmd {
5768 	/* Filter ID */
5769 	__le32 bcn_filter_id;
5770 	/* Filter type - wmi_bcn_filter */
5771 	__le32 bcn_filter;
5772 	/* Buffer len */
5773 	__le32 bcn_filter_len;
5774 	/* Filter info (threshold, BSSID, RSSI) */
5775 	u8 *bcn_filter_buf;
5776 } __packed;
5777 
5778 /* Capabilities and IEs to be passed to firmware */
5779 struct wmi_bcn_prb_info {
5780 	/* Capabilities */
5781 	__le32 caps;
5782 	/* ERP info */
5783 	__le32 erp;
5784 	/* Advanced capabilities */
5785 	/* HT capabilities */
5786 	/* HT Info */
5787 	/* ibss_dfs */
5788 	/* wpa Info */
5789 	/* rsn Info */
5790 	/* rrm info */
5791 	/* ath_ext */
5792 	/* app IE */
5793 } __packed;
5794 
5795 struct wmi_bcn_tmpl_cmd {
5796 	/* unique id identifying the VDEV, generated by the caller */
5797 	__le32 vdev_id;
5798 	/* TIM IE offset from the beginning of the template. */
5799 	__le32 tim_ie_offset;
5800 	/* beacon probe capabilities and IEs */
5801 	struct wmi_bcn_prb_info bcn_prb_info;
5802 	/* beacon buffer length */
5803 	__le32 buf_len;
5804 	/* variable length data */
5805 	u8 data[1];
5806 } __packed;
5807 
5808 struct wmi_prb_tmpl_cmd {
5809 	/* unique id identifying the VDEV, generated by the caller */
5810 	__le32 vdev_id;
5811 	/* beacon probe capabilities and IEs */
5812 	struct wmi_bcn_prb_info bcn_prb_info;
5813 	/* beacon buffer length */
5814 	__le32 buf_len;
5815 	/* Variable length data */
5816 	u8 data[1];
5817 } __packed;
5818 
5819 enum wmi_sta_ps_mode {
5820 	/* enable power save for the given STA VDEV */
5821 	WMI_STA_PS_MODE_DISABLED = 0,
5822 	/* disable power save  for a given STA VDEV */
5823 	WMI_STA_PS_MODE_ENABLED = 1,
5824 };
5825 
5826 struct wmi_sta_powersave_mode_cmd {
5827 	/* unique id identifying the VDEV, generated by the caller */
5828 	__le32 vdev_id;
5829 
5830 	/*
5831 	 * Power save mode
5832 	 * (see enum wmi_sta_ps_mode)
5833 	 */
5834 	__le32 sta_ps_mode;
5835 } __packed;
5836 
5837 enum wmi_csa_offload_en {
5838 	WMI_CSA_OFFLOAD_DISABLE = 0,
5839 	WMI_CSA_OFFLOAD_ENABLE = 1,
5840 };
5841 
5842 struct wmi_csa_offload_enable_cmd {
5843 	__le32 vdev_id;
5844 	__le32 csa_offload_enable;
5845 } __packed;
5846 
5847 struct wmi_csa_offload_chanswitch_cmd {
5848 	__le32 vdev_id;
5849 	struct wmi_channel chan;
5850 } __packed;
5851 
5852 /*
5853  * This parameter controls the policy for retrieving frames from AP while the
5854  * STA is in sleep state.
5855  *
5856  * Only takes affect if the sta_ps_mode is enabled
5857  */
5858 enum wmi_sta_ps_param_rx_wake_policy {
5859 	/*
5860 	 * Wake up when ever there is an  RX activity on the VDEV. In this mode
5861 	 * the Power save SM(state machine) will come out of sleep by either
5862 	 * sending null frame (or) a data frame (with PS==0) in response to TIM
5863 	 * bit set in the received beacon frame from AP.
5864 	 */
5865 	WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
5866 
5867 	/*
5868 	 * Here the power save state machine will not wakeup in response to TIM
5869 	 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
5870 	 * configuration setup by WMISET_PS_SET_UAPSD  WMI command.  When all
5871 	 * access categories are delivery-enabled, the station will send a
5872 	 * UAPSD trigger frame, otherwise it will send a PS-Poll.
5873 	 */
5874 	WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
5875 };
5876 
5877 /*
5878  * Number of tx frames/beacon  that cause the power save SM to wake up.
5879  *
5880  * Value 1 causes the SM to wake up for every TX. Value 0 has a special
5881  * meaning, It will cause the SM to never wake up. This is useful if you want
5882  * to keep the system to sleep all the time for some kind of test mode . host
5883  * can change this parameter any time.  It will affect at the next tx frame.
5884  */
5885 enum wmi_sta_ps_param_tx_wake_threshold {
5886 	WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
5887 	WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
5888 
5889 	/*
5890 	 * Values greater than one indicate that many TX attempts per beacon
5891 	 * interval before the STA will wake up
5892 	 */
5893 };
5894 
5895 /*
5896  * The maximum number of PS-Poll frames the FW will send in response to
5897  * traffic advertised in TIM before waking up (by sending a null frame with PS
5898  * = 0). Value 0 has a special meaning: there is no maximum count and the FW
5899  * will send as many PS-Poll as are necessary to retrieve buffered BU. This
5900  * parameter is used when the RX wake policy is
5901  * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
5902  * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
5903  */
5904 enum wmi_sta_ps_param_pspoll_count {
5905 	WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
5906 	/*
5907 	 * Values greater than 0 indicate the maximum number of PS-Poll frames
5908 	 * FW will send before waking up.
5909 	 */
5910 
5911 	/* When u-APSD is enabled the firmware will be very reluctant to exit
5912 	 * STA PS. This could result in very poor Rx performance with STA doing
5913 	 * PS-Poll for each and every buffered frame. This value is a bit
5914 	 * arbitrary.
5915 	 */
5916 	WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
5917 };
5918 
5919 /*
5920  * This will include the delivery and trigger enabled state for every AC.
5921  * This is the negotiated state with AP. The host MLME needs to set this based
5922  * on AP capability and the state Set in the association request by the
5923  * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
5924  */
5925 #define WMI_UAPSD_AC_TYPE_DELI 0
5926 #define WMI_UAPSD_AC_TYPE_TRIG 1
5927 
5928 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \
5929 	(type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1))
5930 
5931 enum wmi_sta_ps_param_uapsd {
5932 	WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5933 	WMI_STA_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
5934 	WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5935 	WMI_STA_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
5936 	WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5937 	WMI_STA_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
5938 	WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5939 	WMI_STA_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
5940 };
5941 
5942 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
5943 
5944 struct wmi_sta_uapsd_auto_trig_param {
5945 	__le32 wmm_ac;
5946 	__le32 user_priority;
5947 	__le32 service_interval;
5948 	__le32 suspend_interval;
5949 	__le32 delay_interval;
5950 };
5951 
5952 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
5953 	__le32 vdev_id;
5954 	struct wmi_mac_addr peer_macaddr;
5955 	__le32 num_ac;
5956 };
5957 
5958 struct wmi_sta_uapsd_auto_trig_arg {
5959 	u32 wmm_ac;
5960 	u32 user_priority;
5961 	u32 service_interval;
5962 	u32 suspend_interval;
5963 	u32 delay_interval;
5964 };
5965 
5966 enum wmi_sta_powersave_param {
5967 	/*
5968 	 * Controls how frames are retrievd from AP while STA is sleeping
5969 	 *
5970 	 * (see enum wmi_sta_ps_param_rx_wake_policy)
5971 	 */
5972 	WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
5973 
5974 	/*
5975 	 * The STA will go active after this many TX
5976 	 *
5977 	 * (see enum wmi_sta_ps_param_tx_wake_threshold)
5978 	 */
5979 	WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
5980 
5981 	/*
5982 	 * Number of PS-Poll to send before STA wakes up
5983 	 *
5984 	 * (see enum wmi_sta_ps_param_pspoll_count)
5985 	 *
5986 	 */
5987 	WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
5988 
5989 	/*
5990 	 * TX/RX inactivity time in msec before going to sleep.
5991 	 *
5992 	 * The power save SM will monitor tx/rx activity on the VDEV, if no
5993 	 * activity for the specified msec of the parameter the Power save
5994 	 * SM will go to sleep.
5995 	 */
5996 	WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
5997 
5998 	/*
5999 	 * Set uapsd configuration.
6000 	 *
6001 	 * (see enum wmi_sta_ps_param_uapsd)
6002 	 */
6003 	WMI_STA_PS_PARAM_UAPSD = 4,
6004 };
6005 
6006 struct wmi_sta_powersave_param_cmd {
6007 	__le32 vdev_id;
6008 	__le32 param_id; /* %WMI_STA_PS_PARAM_ */
6009 	__le32 param_value;
6010 } __packed;
6011 
6012 /* No MIMO power save */
6013 #define WMI_STA_MIMO_PS_MODE_DISABLE
6014 /* mimo powersave mode static*/
6015 #define WMI_STA_MIMO_PS_MODE_STATIC
6016 /* mimo powersave mode dynamic */
6017 #define WMI_STA_MIMO_PS_MODE_DYNAMIC
6018 
6019 struct wmi_sta_mimo_ps_mode_cmd {
6020 	/* unique id identifying the VDEV, generated by the caller */
6021 	__le32 vdev_id;
6022 	/* mimo powersave mode as defined above */
6023 	__le32 mimo_pwrsave_mode;
6024 } __packed;
6025 
6026 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */
6027 enum wmi_ap_ps_param_uapsd {
6028 	WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
6029 	WMI_AP_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
6030 	WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
6031 	WMI_AP_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
6032 	WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
6033 	WMI_AP_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
6034 	WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
6035 	WMI_AP_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
6036 };
6037 
6038 /* U-APSD maximum service period of peer station */
6039 enum wmi_ap_ps_peer_param_max_sp {
6040 	WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
6041 	WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
6042 	WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
6043 	WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
6044 	MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
6045 };
6046 
6047 /*
6048  * AP power save parameter
6049  * Set a power save specific parameter for a peer station
6050  */
6051 enum wmi_ap_ps_peer_param {
6052 	/* Set uapsd configuration for a given peer.
6053 	 *
6054 	 * Include the delivery and trigger enabled state for every AC.
6055 	 * The host  MLME needs to set this based on AP capability and stations
6056 	 * request Set in the association request  received from the station.
6057 	 *
6058 	 * Lower 8 bits of the value specify the UAPSD configuration.
6059 	 *
6060 	 * (see enum wmi_ap_ps_param_uapsd)
6061 	 * The default value is 0.
6062 	 */
6063 	WMI_AP_PS_PEER_PARAM_UAPSD = 0,
6064 
6065 	/*
6066 	 * Set the service period for a UAPSD capable station
6067 	 *
6068 	 * The service period from wme ie in the (re)assoc request frame.
6069 	 *
6070 	 * (see enum wmi_ap_ps_peer_param_max_sp)
6071 	 */
6072 	WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
6073 
6074 	/* Time in seconds for aging out buffered frames for STA in PS */
6075 	WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
6076 };
6077 
6078 struct wmi_ap_ps_peer_cmd {
6079 	/* unique id identifying the VDEV, generated by the caller */
6080 	__le32 vdev_id;
6081 
6082 	/* peer MAC address */
6083 	struct wmi_mac_addr peer_macaddr;
6084 
6085 	/* AP powersave param (see enum wmi_ap_ps_peer_param) */
6086 	__le32 param_id;
6087 
6088 	/* AP powersave param value */
6089 	__le32 param_value;
6090 } __packed;
6091 
6092 /* 128 clients = 4 words */
6093 #define WMI_TIM_BITMAP_ARRAY_SIZE 4
6094 
6095 struct wmi_tim_info {
6096 	__le32 tim_len;
6097 	__le32 tim_mcast;
6098 	__le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
6099 	__le32 tim_changed;
6100 	__le32 tim_num_ps_pending;
6101 } __packed;
6102 
6103 struct wmi_tim_info_arg {
6104 	__le32 tim_len;
6105 	__le32 tim_mcast;
6106 	const __le32 *tim_bitmap;
6107 	__le32 tim_changed;
6108 	__le32 tim_num_ps_pending;
6109 } __packed;
6110 
6111 /* Maximum number of NOA Descriptors supported */
6112 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4
6113 #define WMI_P2P_OPPPS_ENABLE_BIT	BIT(0)
6114 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET	1
6115 #define WMI_P2P_NOA_CHANGED_BIT	BIT(0)
6116 
6117 struct wmi_p2p_noa_info {
6118 	/* Bit 0 - Flag to indicate an update in NOA schedule
6119 	 * Bits 7-1 - Reserved
6120 	 */
6121 	u8 changed;
6122 	/* NOA index */
6123 	u8 index;
6124 	/* Bit 0 - Opp PS state of the AP
6125 	 * Bits 1-7 - Ctwindow in TUs
6126 	 */
6127 	u8 ctwindow_oppps;
6128 	/* Number of NOA descriptors */
6129 	u8 num_descriptors;
6130 
6131 	struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
6132 } __packed;
6133 
6134 struct wmi_bcn_info {
6135 	struct wmi_tim_info tim_info;
6136 	struct wmi_p2p_noa_info p2p_noa_info;
6137 } __packed;
6138 
6139 struct wmi_host_swba_event {
6140 	__le32 vdev_map;
6141 	struct wmi_bcn_info bcn_info[];
6142 } __packed;
6143 
6144 struct wmi_10_2_4_bcn_info {
6145 	struct wmi_tim_info tim_info;
6146 	/* The 10.2.4 FW doesn't have p2p NOA info */
6147 } __packed;
6148 
6149 struct wmi_10_2_4_host_swba_event {
6150 	__le32 vdev_map;
6151 	struct wmi_10_2_4_bcn_info bcn_info[];
6152 } __packed;
6153 
6154 /* 16 words = 512 client + 1 word = for guard */
6155 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
6156 
6157 struct wmi_10_4_tim_info {
6158 	__le32 tim_len;
6159 	__le32 tim_mcast;
6160 	__le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
6161 	__le32 tim_changed;
6162 	__le32 tim_num_ps_pending;
6163 } __packed;
6164 
6165 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
6166 
6167 struct wmi_10_4_p2p_noa_info {
6168 	/* Bit 0 - Flag to indicate an update in NOA schedule
6169 	 * Bits 7-1 - Reserved
6170 	 */
6171 	u8 changed;
6172 	/* NOA index */
6173 	u8 index;
6174 	/* Bit 0 - Opp PS state of the AP
6175 	 * Bits 1-7 - Ctwindow in TUs
6176 	 */
6177 	u8 ctwindow_oppps;
6178 	/* Number of NOA descriptors */
6179 	u8 num_descriptors;
6180 
6181 	struct wmi_p2p_noa_descriptor
6182 		noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
6183 } __packed;
6184 
6185 struct wmi_10_4_bcn_info {
6186 	struct wmi_10_4_tim_info tim_info;
6187 	struct wmi_10_4_p2p_noa_info p2p_noa_info;
6188 } __packed;
6189 
6190 struct wmi_10_4_host_swba_event {
6191 	__le32 vdev_map;
6192 	struct wmi_10_4_bcn_info bcn_info[];
6193 } __packed;
6194 
6195 #define WMI_MAX_AP_VDEV 16
6196 
6197 struct wmi_tbtt_offset_event {
6198 	__le32 vdev_map;
6199 	__le32 tbttoffset_list[WMI_MAX_AP_VDEV];
6200 } __packed;
6201 
6202 struct wmi_peer_create_cmd {
6203 	__le32 vdev_id;
6204 	struct wmi_mac_addr peer_macaddr;
6205 	__le32 peer_type;
6206 } __packed;
6207 
6208 enum wmi_peer_type {
6209 	WMI_PEER_TYPE_DEFAULT = 0,
6210 	WMI_PEER_TYPE_BSS = 1,
6211 	WMI_PEER_TYPE_TDLS = 2,
6212 };
6213 
6214 struct wmi_peer_delete_cmd {
6215 	__le32 vdev_id;
6216 	struct wmi_mac_addr peer_macaddr;
6217 } __packed;
6218 
6219 struct wmi_peer_flush_tids_cmd {
6220 	__le32 vdev_id;
6221 	struct wmi_mac_addr peer_macaddr;
6222 	__le32 peer_tid_bitmap;
6223 } __packed;
6224 
6225 struct wmi_fixed_rate {
6226 	/*
6227 	 * rate mode . 0: disable fixed rate (auto rate)
6228 	 *   1: legacy (non 11n) rate  specified as ieee rate 2*Mbps
6229 	 *   2: ht20 11n rate  specified as mcs index
6230 	 *   3: ht40 11n rate  specified as mcs index
6231 	 */
6232 	__le32  rate_mode;
6233 	/*
6234 	 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
6235 	 * and series 3 is stored at byte 3 (MSB)
6236 	 */
6237 	__le32  rate_series;
6238 	/*
6239 	 * 4 retry counts for 4 rate series. retry count for rate 0 is stored
6240 	 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
6241 	 * (MSB)
6242 	 */
6243 	__le32  rate_retries;
6244 } __packed;
6245 
6246 struct wmi_peer_fixed_rate_cmd {
6247 	/* unique id identifying the VDEV, generated by the caller */
6248 	__le32 vdev_id;
6249 	/* peer MAC address */
6250 	struct wmi_mac_addr peer_macaddr;
6251 	/* fixed rate */
6252 	struct wmi_fixed_rate peer_fixed_rate;
6253 } __packed;
6254 
6255 #define WMI_MGMT_TID    17
6256 
6257 struct wmi_addba_clear_resp_cmd {
6258 	/* unique id identifying the VDEV, generated by the caller */
6259 	__le32 vdev_id;
6260 	/* peer MAC address */
6261 	struct wmi_mac_addr peer_macaddr;
6262 } __packed;
6263 
6264 struct wmi_addba_send_cmd {
6265 	/* unique id identifying the VDEV, generated by the caller */
6266 	__le32 vdev_id;
6267 	/* peer MAC address */
6268 	struct wmi_mac_addr peer_macaddr;
6269 	/* Tid number */
6270 	__le32 tid;
6271 	/* Buffer/Window size*/
6272 	__le32 buffersize;
6273 } __packed;
6274 
6275 struct wmi_delba_send_cmd {
6276 	/* unique id identifying the VDEV, generated by the caller */
6277 	__le32 vdev_id;
6278 	/* peer MAC address */
6279 	struct wmi_mac_addr peer_macaddr;
6280 	/* Tid number */
6281 	__le32 tid;
6282 	/* Is Initiator */
6283 	__le32 initiator;
6284 	/* Reason code */
6285 	__le32 reasoncode;
6286 } __packed;
6287 
6288 struct wmi_addba_setresponse_cmd {
6289 	/* unique id identifying the vdev, generated by the caller */
6290 	__le32 vdev_id;
6291 	/* peer mac address */
6292 	struct wmi_mac_addr peer_macaddr;
6293 	/* Tid number */
6294 	__le32 tid;
6295 	/* status code */
6296 	__le32 statuscode;
6297 } __packed;
6298 
6299 struct wmi_send_singleamsdu_cmd {
6300 	/* unique id identifying the vdev, generated by the caller */
6301 	__le32 vdev_id;
6302 	/* peer mac address */
6303 	struct wmi_mac_addr peer_macaddr;
6304 	/* Tid number */
6305 	__le32 tid;
6306 } __packed;
6307 
6308 enum wmi_peer_smps_state {
6309 	WMI_PEER_SMPS_PS_NONE = 0x0,
6310 	WMI_PEER_SMPS_STATIC  = 0x1,
6311 	WMI_PEER_SMPS_DYNAMIC = 0x2
6312 };
6313 
6314 enum wmi_peer_chwidth {
6315 	WMI_PEER_CHWIDTH_20MHZ = 0,
6316 	WMI_PEER_CHWIDTH_40MHZ = 1,
6317 	WMI_PEER_CHWIDTH_80MHZ = 2,
6318 	WMI_PEER_CHWIDTH_160MHZ = 3,
6319 };
6320 
6321 enum wmi_peer_param {
6322 	WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
6323 	WMI_PEER_AMPDU      = 0x2,
6324 	WMI_PEER_AUTHORIZE  = 0x3,
6325 	WMI_PEER_CHAN_WIDTH = 0x4,
6326 	WMI_PEER_NSS        = 0x5,
6327 	WMI_PEER_USE_4ADDR  = 0x6,
6328 	WMI_PEER_USE_FIXED_PWR = 0x8,
6329 	WMI_PEER_PARAM_FIXED_RATE = 0x9,
6330 	WMI_PEER_DEBUG      = 0xa,
6331 	WMI_PEER_PHYMODE    = 0xd,
6332 	WMI_PEER_DUMMY_VAR  = 0xff, /* dummy parameter for STA PS workaround */
6333 };
6334 
6335 struct wmi_peer_set_param_cmd {
6336 	__le32 vdev_id;
6337 	struct wmi_mac_addr peer_macaddr;
6338 	__le32 param_id;
6339 	__le32 param_value;
6340 } __packed;
6341 
6342 #define MAX_SUPPORTED_RATES 128
6343 
6344 struct wmi_rate_set {
6345 	/* total number of rates */
6346 	__le32 num_rates;
6347 	/*
6348 	 * rates (each 8bit value) packed into a 32 bit word.
6349 	 * the rates are filled from least significant byte to most
6350 	 * significant byte.
6351 	 */
6352 	__le32 rates[(MAX_SUPPORTED_RATES / 4) + 1];
6353 } __packed;
6354 
6355 struct wmi_rate_set_arg {
6356 	unsigned int num_rates;
6357 	u8 rates[MAX_SUPPORTED_RATES];
6358 };
6359 
6360 /*
6361  * NOTE: It would bea good idea to represent the Tx MCS
6362  * info in one word and Rx in another word. This is split
6363  * into multiple words for convenience
6364  */
6365 struct wmi_vht_rate_set {
6366 	__le32 rx_max_rate; /* Max Rx data rate */
6367 	__le32 rx_mcs_set;  /* Negotiated RX VHT rates */
6368 	__le32 tx_max_rate; /* Max Tx data rate */
6369 	__le32 tx_mcs_set;  /* Negotiated TX VHT rates */
6370 } __packed;
6371 
6372 struct wmi_vht_rate_set_arg {
6373 	u32 rx_max_rate;
6374 	u32 rx_mcs_set;
6375 	u32 tx_max_rate;
6376 	u32 tx_mcs_set;
6377 };
6378 
6379 struct wmi_peer_set_rates_cmd {
6380 	/* peer MAC address */
6381 	struct wmi_mac_addr peer_macaddr;
6382 	/* legacy rate set */
6383 	struct wmi_rate_set peer_legacy_rates;
6384 	/* ht rate set */
6385 	struct wmi_rate_set peer_ht_rates;
6386 } __packed;
6387 
6388 struct wmi_peer_set_q_empty_callback_cmd {
6389 	/* unique id identifying the VDEV, generated by the caller */
6390 	__le32 vdev_id;
6391 	/* peer MAC address */
6392 	struct wmi_mac_addr peer_macaddr;
6393 	__le32 callback_enable;
6394 } __packed;
6395 
6396 struct wmi_peer_flags_map {
6397 	u32 auth;
6398 	u32 qos;
6399 	u32 need_ptk_4_way;
6400 	u32 need_gtk_2_way;
6401 	u32 apsd;
6402 	u32 ht;
6403 	u32 bw40;
6404 	u32 stbc;
6405 	u32 ldbc;
6406 	u32 dyn_mimops;
6407 	u32 static_mimops;
6408 	u32 spatial_mux;
6409 	u32 vht;
6410 	u32 bw80;
6411 	u32 vht_2g;
6412 	u32 pmf;
6413 	u32 bw160;
6414 };
6415 
6416 enum wmi_peer_flags {
6417 	WMI_PEER_AUTH = 0x00000001,
6418 	WMI_PEER_QOS = 0x00000002,
6419 	WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
6420 	WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
6421 	WMI_PEER_APSD = 0x00000800,
6422 	WMI_PEER_HT = 0x00001000,
6423 	WMI_PEER_40MHZ = 0x00002000,
6424 	WMI_PEER_STBC = 0x00008000,
6425 	WMI_PEER_LDPC = 0x00010000,
6426 	WMI_PEER_DYN_MIMOPS = 0x00020000,
6427 	WMI_PEER_STATIC_MIMOPS = 0x00040000,
6428 	WMI_PEER_SPATIAL_MUX = 0x00200000,
6429 	WMI_PEER_VHT = 0x02000000,
6430 	WMI_PEER_80MHZ = 0x04000000,
6431 	WMI_PEER_VHT_2G = 0x08000000,
6432 	WMI_PEER_PMF = 0x10000000,
6433 	WMI_PEER_160MHZ = 0x20000000
6434 };
6435 
6436 enum wmi_10x_peer_flags {
6437 	WMI_10X_PEER_AUTH = 0x00000001,
6438 	WMI_10X_PEER_QOS = 0x00000002,
6439 	WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
6440 	WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
6441 	WMI_10X_PEER_APSD = 0x00000800,
6442 	WMI_10X_PEER_HT = 0x00001000,
6443 	WMI_10X_PEER_40MHZ = 0x00002000,
6444 	WMI_10X_PEER_STBC = 0x00008000,
6445 	WMI_10X_PEER_LDPC = 0x00010000,
6446 	WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
6447 	WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
6448 	WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
6449 	WMI_10X_PEER_VHT = 0x02000000,
6450 	WMI_10X_PEER_80MHZ = 0x04000000,
6451 	WMI_10X_PEER_160MHZ = 0x20000000
6452 };
6453 
6454 enum wmi_10_2_peer_flags {
6455 	WMI_10_2_PEER_AUTH = 0x00000001,
6456 	WMI_10_2_PEER_QOS = 0x00000002,
6457 	WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
6458 	WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
6459 	WMI_10_2_PEER_APSD = 0x00000800,
6460 	WMI_10_2_PEER_HT = 0x00001000,
6461 	WMI_10_2_PEER_40MHZ = 0x00002000,
6462 	WMI_10_2_PEER_STBC = 0x00008000,
6463 	WMI_10_2_PEER_LDPC = 0x00010000,
6464 	WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
6465 	WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
6466 	WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
6467 	WMI_10_2_PEER_VHT = 0x02000000,
6468 	WMI_10_2_PEER_80MHZ = 0x04000000,
6469 	WMI_10_2_PEER_VHT_2G = 0x08000000,
6470 	WMI_10_2_PEER_PMF = 0x10000000,
6471 	WMI_10_2_PEER_160MHZ = 0x20000000
6472 };
6473 
6474 /*
6475  * Peer rate capabilities.
6476  *
6477  * This is of interest to the ratecontrol
6478  * module which resides in the firmware. The bit definitions are
6479  * consistent with that defined in if_athrate.c.
6480  */
6481 #define WMI_RC_DS_FLAG          0x01
6482 #define WMI_RC_CW40_FLAG        0x02
6483 #define WMI_RC_SGI_FLAG         0x04
6484 #define WMI_RC_HT_FLAG          0x08
6485 #define WMI_RC_RTSCTS_FLAG      0x10
6486 #define WMI_RC_TX_STBC_FLAG     0x20
6487 #define WMI_RC_RX_STBC_FLAG     0xC0
6488 #define WMI_RC_RX_STBC_FLAG_S   6
6489 #define WMI_RC_WEP_TKIP_FLAG    0x100
6490 #define WMI_RC_TS_FLAG          0x200
6491 #define WMI_RC_UAPSD_FLAG       0x400
6492 
6493 /* Maximum listen interval supported by hw in units of beacon interval */
6494 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5
6495 
6496 struct wmi_common_peer_assoc_complete_cmd {
6497 	struct wmi_mac_addr peer_macaddr;
6498 	__le32 vdev_id;
6499 	__le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
6500 	__le32 peer_associd; /* 16 LSBs */
6501 	__le32 peer_flags;
6502 	__le32 peer_caps; /* 16 LSBs */
6503 	__le32 peer_listen_intval;
6504 	__le32 peer_ht_caps;
6505 	__le32 peer_max_mpdu;
6506 	__le32 peer_mpdu_density; /* 0..16 */
6507 	__le32 peer_rate_caps;
6508 	struct wmi_rate_set peer_legacy_rates;
6509 	struct wmi_rate_set peer_ht_rates;
6510 	__le32 peer_nss; /* num of spatial streams */
6511 	__le32 peer_vht_caps;
6512 	__le32 peer_phymode;
6513 	struct wmi_vht_rate_set peer_vht_rates;
6514 };
6515 
6516 struct wmi_main_peer_assoc_complete_cmd {
6517 	struct wmi_common_peer_assoc_complete_cmd cmd;
6518 
6519 	/* HT Operation Element of the peer. Five bytes packed in 2
6520 	 *  INT32 array and filled from lsb to msb.
6521 	 */
6522 	__le32 peer_ht_info[2];
6523 } __packed;
6524 
6525 struct wmi_10_1_peer_assoc_complete_cmd {
6526 	struct wmi_common_peer_assoc_complete_cmd cmd;
6527 } __packed;
6528 
6529 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
6530 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
6531 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
6532 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
6533 
6534 struct wmi_10_2_peer_assoc_complete_cmd {
6535 	struct wmi_common_peer_assoc_complete_cmd cmd;
6536 	__le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
6537 } __packed;
6538 
6539 /* NSS Mapping to FW */
6540 #define WMI_PEER_NSS_MAP_ENABLE	BIT(31)
6541 #define WMI_PEER_NSS_160MHZ_MASK	GENMASK(2, 0)
6542 #define WMI_PEER_NSS_80_80MHZ_MASK	GENMASK(5, 3)
6543 
6544 struct wmi_10_4_peer_assoc_complete_cmd {
6545 	struct wmi_10_2_peer_assoc_complete_cmd cmd;
6546 	__le32 peer_bw_rxnss_override;
6547 } __packed;
6548 
6549 struct wmi_peer_assoc_complete_arg {
6550 	u8 addr[ETH_ALEN];
6551 	u32 vdev_id;
6552 	bool peer_reassoc;
6553 	u16 peer_aid;
6554 	u32 peer_flags; /* see %WMI_PEER_ */
6555 	u16 peer_caps;
6556 	u32 peer_listen_intval;
6557 	u32 peer_ht_caps;
6558 	u32 peer_max_mpdu;
6559 	u32 peer_mpdu_density; /* 0..16 */
6560 	u32 peer_rate_caps; /* see %WMI_RC_ */
6561 	struct wmi_rate_set_arg peer_legacy_rates;
6562 	struct wmi_rate_set_arg peer_ht_rates;
6563 	u32 peer_num_spatial_streams;
6564 	u32 peer_vht_caps;
6565 	enum wmi_phy_mode peer_phymode;
6566 	struct wmi_vht_rate_set_arg peer_vht_rates;
6567 	u32 peer_bw_rxnss_override;
6568 };
6569 
6570 struct wmi_peer_add_wds_entry_cmd {
6571 	/* peer MAC address */
6572 	struct wmi_mac_addr peer_macaddr;
6573 	/* wds MAC addr */
6574 	struct wmi_mac_addr wds_macaddr;
6575 } __packed;
6576 
6577 struct wmi_peer_remove_wds_entry_cmd {
6578 	/* wds MAC addr */
6579 	struct wmi_mac_addr wds_macaddr;
6580 } __packed;
6581 
6582 struct wmi_peer_q_empty_callback_event {
6583 	/* peer MAC address */
6584 	struct wmi_mac_addr peer_macaddr;
6585 } __packed;
6586 
6587 /*
6588  * Channel info WMI event
6589  */
6590 struct wmi_chan_info_event {
6591 	__le32 err_code;
6592 	__le32 freq;
6593 	__le32 cmd_flags;
6594 	__le32 noise_floor;
6595 	__le32 rx_clear_count;
6596 	__le32 cycle_count;
6597 } __packed;
6598 
6599 struct wmi_10_4_chan_info_event {
6600 	__le32 err_code;
6601 	__le32 freq;
6602 	__le32 cmd_flags;
6603 	__le32 noise_floor;
6604 	__le32 rx_clear_count;
6605 	__le32 cycle_count;
6606 	__le32 chan_tx_pwr_range;
6607 	__le32 chan_tx_pwr_tp;
6608 	__le32 rx_frame_count;
6609 } __packed;
6610 
6611 struct wmi_peer_sta_kickout_event {
6612 	struct wmi_mac_addr peer_macaddr;
6613 } __packed;
6614 
6615 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
6616 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
6617 
6618 /* Beacon filter wmi command info */
6619 #define BCN_FLT_MAX_SUPPORTED_IES	256
6620 #define BCN_FLT_MAX_ELEMS_IE_LIST	(BCN_FLT_MAX_SUPPORTED_IES / 32)
6621 
6622 struct bss_bcn_stats {
6623 	__le32 vdev_id;
6624 	__le32 bss_bcnsdropped;
6625 	__le32 bss_bcnsdelivered;
6626 } __packed;
6627 
6628 struct bcn_filter_stats {
6629 	__le32 bcns_dropped;
6630 	__le32 bcns_delivered;
6631 	__le32 activefilters;
6632 	struct bss_bcn_stats bss_stats;
6633 } __packed;
6634 
6635 struct wmi_add_bcn_filter_cmd {
6636 	u32 vdev_id;
6637 	u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
6638 } __packed;
6639 
6640 enum wmi_sta_keepalive_method {
6641 	WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
6642 	WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
6643 };
6644 
6645 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
6646 
6647 /* Firmware crashes if keepalive interval exceeds this limit */
6648 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
6649 
6650 /* note: ip4 addresses are in network byte order, i.e. big endian */
6651 struct wmi_sta_keepalive_arp_resp {
6652 	__be32 src_ip4_addr;
6653 	__be32 dest_ip4_addr;
6654 	struct wmi_mac_addr dest_mac_addr;
6655 } __packed;
6656 
6657 struct wmi_sta_keepalive_cmd {
6658 	__le32 vdev_id;
6659 	__le32 enabled;
6660 	__le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
6661 	__le32 interval; /* in seconds */
6662 	struct wmi_sta_keepalive_arp_resp arp_resp;
6663 } __packed;
6664 
6665 struct wmi_sta_keepalive_arg {
6666 	u32 vdev_id;
6667 	u32 enabled;
6668 	u32 method;
6669 	u32 interval;
6670 	__be32 src_ip4_addr;
6671 	__be32 dest_ip4_addr;
6672 	const u8 dest_mac_addr[ETH_ALEN];
6673 };
6674 
6675 enum wmi_force_fw_hang_type {
6676 	WMI_FORCE_FW_HANG_ASSERT = 1,
6677 	WMI_FORCE_FW_HANG_NO_DETECT,
6678 	WMI_FORCE_FW_HANG_CTRL_EP_FULL,
6679 	WMI_FORCE_FW_HANG_EMPTY_POINT,
6680 	WMI_FORCE_FW_HANG_STACK_OVERFLOW,
6681 	WMI_FORCE_FW_HANG_INFINITE_LOOP,
6682 };
6683 
6684 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
6685 
6686 struct wmi_force_fw_hang_cmd {
6687 	__le32 type;
6688 	__le32 delay_ms;
6689 } __packed;
6690 
6691 enum wmi_pdev_reset_mode_type {
6692 	WMI_RST_MODE_TX_FLUSH = 1,
6693 	WMI_RST_MODE_WARM_RESET,
6694 	WMI_RST_MODE_COLD_RESET,
6695 	WMI_RST_MODE_WARM_RESET_RESTORE_CAL,
6696 	WMI_RST_MODE_COLD_RESET_RESTORE_CAL,
6697 	WMI_RST_MODE_MAX,
6698 };
6699 
6700 enum ath10k_dbglog_level {
6701 	ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
6702 	ATH10K_DBGLOG_LEVEL_INFO = 1,
6703 	ATH10K_DBGLOG_LEVEL_WARN = 2,
6704 	ATH10K_DBGLOG_LEVEL_ERR = 3,
6705 };
6706 
6707 /* VAP ids to enable dbglog */
6708 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB		0
6709 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK		0x0000ffff
6710 
6711 /* to enable dbglog in the firmware */
6712 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB	16
6713 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK	0x00010000
6714 
6715 /* timestamp resolution */
6716 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB	17
6717 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK	0x000E0000
6718 
6719 /* number of queued messages before sending them to the host */
6720 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB	20
6721 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK	0x0ff00000
6722 
6723 /*
6724  * Log levels to enable. This defines the minimum level to enable, this is
6725  * not a bitmask. See enum ath10k_dbglog_level for the values.
6726  */
6727 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB		28
6728 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK		0x70000000
6729 
6730 /*
6731  * Note: this is a cleaned up version of a struct firmware uses. For
6732  * example, config_valid was hidden inside an array.
6733  */
6734 struct wmi_dbglog_cfg_cmd {
6735 	/* bitmask to hold mod id config*/
6736 	__le32 module_enable;
6737 
6738 	/* see ATH10K_DBGLOG_CFG_ */
6739 	__le32 config_enable;
6740 
6741 	/* mask of module id bits to be changed */
6742 	__le32 module_valid;
6743 
6744 	/* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6745 	__le32 config_valid;
6746 } __packed;
6747 
6748 struct wmi_10_4_dbglog_cfg_cmd {
6749 	/* bitmask to hold mod id config*/
6750 	__le64 module_enable;
6751 
6752 	/* see ATH10K_DBGLOG_CFG_ */
6753 	__le32 config_enable;
6754 
6755 	/* mask of module id bits to be changed */
6756 	__le64 module_valid;
6757 
6758 	/* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6759 	__le32 config_valid;
6760 } __packed;
6761 
6762 enum wmi_roam_reason {
6763 	WMI_ROAM_REASON_BETTER_AP = 1,
6764 	WMI_ROAM_REASON_BEACON_MISS = 2,
6765 	WMI_ROAM_REASON_LOW_RSSI = 3,
6766 	WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
6767 	WMI_ROAM_REASON_HO_FAILED = 5,
6768 
6769 	/* keep last */
6770 	WMI_ROAM_REASON_MAX,
6771 };
6772 
6773 struct wmi_roam_ev {
6774 	__le32 vdev_id;
6775 	__le32 reason;
6776 } __packed;
6777 
6778 #define ATH10K_FRAGMT_THRESHOLD_MIN	540
6779 #define ATH10K_FRAGMT_THRESHOLD_MAX	2346
6780 
6781 #define WMI_MAX_EVENT 0x1000
6782 /* Maximum number of pending TXed WMI packets */
6783 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
6784 
6785 /* By default disable power save for IBSS */
6786 #define ATH10K_DEFAULT_ATIM 0
6787 
6788 #define WMI_MAX_MEM_REQS 16
6789 
6790 struct wmi_scan_ev_arg {
6791 	__le32 event_type; /* %WMI_SCAN_EVENT_ */
6792 	__le32 reason; /* %WMI_SCAN_REASON_ */
6793 	__le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
6794 	__le32 scan_req_id;
6795 	__le32 scan_id;
6796 	__le32 vdev_id;
6797 };
6798 
6799 struct mgmt_tx_compl_params {
6800 	u32 desc_id;
6801 	u32 status;
6802 	u32 ppdu_id;
6803 	int ack_rssi;
6804 };
6805 
6806 struct wmi_tlv_mgmt_tx_compl_ev_arg {
6807 	__le32 desc_id;
6808 	__le32 status;
6809 	__le32 pdev_id;
6810 	__le32 ppdu_id;
6811 	__le32 ack_rssi;
6812 };
6813 
6814 struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg {
6815 	__le32 num_reports;
6816 	const __le32 *desc_ids;
6817 	const __le32 *status;
6818 	const __le32 *ppdu_ids;
6819 	const __le32 *ack_rssi;
6820 };
6821 
6822 struct wmi_peer_delete_resp_ev_arg {
6823 	__le32 vdev_id;
6824 	struct wmi_mac_addr peer_addr;
6825 };
6826 
6827 #define WMI_MGMT_RX_NUM_RSSI 4
6828 struct wmi_mgmt_rx_ev_arg {
6829 	__le32 channel;
6830 	__le32 snr;
6831 	__le32 rate;
6832 	__le32 phy_mode;
6833 	__le32 buf_len;
6834 	__le32 status; /* %WMI_RX_STATUS_ */
6835 	struct wmi_mgmt_rx_ext_info ext_info;
6836 	__le32 rssi[WMI_MGMT_RX_NUM_RSSI];
6837 };
6838 
6839 struct wmi_ch_info_ev_arg {
6840 	__le32 err_code;
6841 	__le32 freq;
6842 	__le32 cmd_flags;
6843 	__le32 noise_floor;
6844 	__le32 rx_clear_count;
6845 	__le32 cycle_count;
6846 	__le32 chan_tx_pwr_range;
6847 	__le32 chan_tx_pwr_tp;
6848 	__le32 rx_frame_count;
6849 	__le32 my_bss_rx_cycle_count;
6850 	__le32 rx_11b_mode_data_duration;
6851 	__le32 tx_frame_cnt;
6852 	__le32 mac_clk_mhz;
6853 };
6854 
6855 /* From 10.4 firmware, not sure all have the same values. */
6856 enum wmi_vdev_start_status {
6857 	WMI_VDEV_START_OK = 0,
6858 	WMI_VDEV_START_CHAN_INVALID,
6859 };
6860 
6861 struct wmi_vdev_start_ev_arg {
6862 	__le32 vdev_id;
6863 	__le32 req_id;
6864 	__le32 resp_type; /* %WMI_VDEV_RESP_ */
6865 	__le32 status; /* See wmi_vdev_start_status enum above */
6866 };
6867 
6868 struct wmi_peer_kick_ev_arg {
6869 	const u8 *mac_addr;
6870 };
6871 
6872 struct wmi_swba_ev_arg {
6873 	__le32 vdev_map;
6874 	struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
6875 	const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
6876 };
6877 
6878 struct wmi_phyerr_ev_arg {
6879 	u32 tsf_timestamp;
6880 	u16 freq1;
6881 	u16 freq2;
6882 	u8 rssi_combined;
6883 	u8 chan_width_mhz;
6884 	u8 phy_err_code;
6885 	u16 nf_chains[4];
6886 	u32 buf_len;
6887 	const u8 *buf;
6888 	u8 hdr_len;
6889 };
6890 
6891 struct wmi_phyerr_hdr_arg {
6892 	u32 num_phyerrs;
6893 	u32 tsf_l32;
6894 	u32 tsf_u32;
6895 	u32 buf_len;
6896 	const void *phyerrs;
6897 };
6898 
6899 struct wmi_dfs_status_ev_arg {
6900 	u32 status;
6901 };
6902 
6903 struct wmi_svc_rdy_ev_arg {
6904 	__le32 min_tx_power;
6905 	__le32 max_tx_power;
6906 	__le32 ht_cap;
6907 	__le32 vht_cap;
6908 	__le32 vht_supp_mcs;
6909 	__le32 sw_ver0;
6910 	__le32 sw_ver1;
6911 	__le32 fw_build;
6912 	__le32 phy_capab;
6913 	__le32 num_rf_chains;
6914 	__le32 eeprom_rd;
6915 	__le32 num_mem_reqs;
6916 	__le32 low_2ghz_chan;
6917 	__le32 high_2ghz_chan;
6918 	__le32 low_5ghz_chan;
6919 	__le32 high_5ghz_chan;
6920 	__le32 sys_cap_info;
6921 	const __le32 *service_map;
6922 	size_t service_map_len;
6923 	const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
6924 };
6925 
6926 struct wmi_svc_avail_ev_arg {
6927 	bool service_map_ext_valid;
6928 	__le32 service_map_ext_len;
6929 	const __le32 *service_map_ext;
6930 };
6931 
6932 struct wmi_rdy_ev_arg {
6933 	__le32 sw_version;
6934 	__le32 abi_version;
6935 	__le32 status;
6936 	const u8 *mac_addr;
6937 };
6938 
6939 struct wmi_roam_ev_arg {
6940 	__le32 vdev_id;
6941 	__le32 reason;
6942 	__le32 rssi;
6943 };
6944 
6945 struct wmi_echo_ev_arg {
6946 	__le32 value;
6947 };
6948 
6949 struct wmi_pdev_temperature_event {
6950 	/* temperature value in Celsius degree */
6951 	__le32 temperature;
6952 } __packed;
6953 
6954 struct wmi_pdev_bss_chan_info_event {
6955 	__le32 freq;
6956 	__le32 noise_floor;
6957 	__le64 cycle_busy;
6958 	__le64 cycle_total;
6959 	__le64 cycle_tx;
6960 	__le64 cycle_rx;
6961 	__le64 cycle_rx_bss;
6962 	__le32 reserved;
6963 } __packed;
6964 
6965 /* WOW structures */
6966 enum wmi_wow_wakeup_event {
6967 	WOW_BMISS_EVENT = 0,
6968 	WOW_BETTER_AP_EVENT,
6969 	WOW_DEAUTH_RECVD_EVENT,
6970 	WOW_MAGIC_PKT_RECVD_EVENT,
6971 	WOW_GTK_ERR_EVENT,
6972 	WOW_FOURWAY_HSHAKE_EVENT,
6973 	WOW_EAPOL_RECVD_EVENT,
6974 	WOW_NLO_DETECTED_EVENT,
6975 	WOW_DISASSOC_RECVD_EVENT,
6976 	WOW_PATTERN_MATCH_EVENT,
6977 	WOW_CSA_IE_EVENT,
6978 	WOW_PROBE_REQ_WPS_IE_EVENT,
6979 	WOW_AUTH_REQ_EVENT,
6980 	WOW_ASSOC_REQ_EVENT,
6981 	WOW_HTT_EVENT,
6982 	WOW_RA_MATCH_EVENT,
6983 	WOW_HOST_AUTO_SHUTDOWN_EVENT,
6984 	WOW_IOAC_MAGIC_EVENT,
6985 	WOW_IOAC_SHORT_EVENT,
6986 	WOW_IOAC_EXTEND_EVENT,
6987 	WOW_IOAC_TIMER_EVENT,
6988 	WOW_DFS_PHYERR_RADAR_EVENT,
6989 	WOW_BEACON_EVENT,
6990 	WOW_CLIENT_KICKOUT_EVENT,
6991 	WOW_EVENT_MAX,
6992 };
6993 
6994 #define C2S(x) case x: return #x
6995 
wow_wakeup_event(enum wmi_wow_wakeup_event ev)6996 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
6997 {
6998 	switch (ev) {
6999 	C2S(WOW_BMISS_EVENT);
7000 	C2S(WOW_BETTER_AP_EVENT);
7001 	C2S(WOW_DEAUTH_RECVD_EVENT);
7002 	C2S(WOW_MAGIC_PKT_RECVD_EVENT);
7003 	C2S(WOW_GTK_ERR_EVENT);
7004 	C2S(WOW_FOURWAY_HSHAKE_EVENT);
7005 	C2S(WOW_EAPOL_RECVD_EVENT);
7006 	C2S(WOW_NLO_DETECTED_EVENT);
7007 	C2S(WOW_DISASSOC_RECVD_EVENT);
7008 	C2S(WOW_PATTERN_MATCH_EVENT);
7009 	C2S(WOW_CSA_IE_EVENT);
7010 	C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
7011 	C2S(WOW_AUTH_REQ_EVENT);
7012 	C2S(WOW_ASSOC_REQ_EVENT);
7013 	C2S(WOW_HTT_EVENT);
7014 	C2S(WOW_RA_MATCH_EVENT);
7015 	C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
7016 	C2S(WOW_IOAC_MAGIC_EVENT);
7017 	C2S(WOW_IOAC_SHORT_EVENT);
7018 	C2S(WOW_IOAC_EXTEND_EVENT);
7019 	C2S(WOW_IOAC_TIMER_EVENT);
7020 	C2S(WOW_DFS_PHYERR_RADAR_EVENT);
7021 	C2S(WOW_BEACON_EVENT);
7022 	C2S(WOW_CLIENT_KICKOUT_EVENT);
7023 	C2S(WOW_EVENT_MAX);
7024 	default:
7025 		return NULL;
7026 	}
7027 }
7028 
7029 enum wmi_wow_wake_reason {
7030 	WOW_REASON_UNSPECIFIED = -1,
7031 	WOW_REASON_NLOD = 0,
7032 	WOW_REASON_AP_ASSOC_LOST,
7033 	WOW_REASON_LOW_RSSI,
7034 	WOW_REASON_DEAUTH_RECVD,
7035 	WOW_REASON_DISASSOC_RECVD,
7036 	WOW_REASON_GTK_HS_ERR,
7037 	WOW_REASON_EAP_REQ,
7038 	WOW_REASON_FOURWAY_HS_RECV,
7039 	WOW_REASON_TIMER_INTR_RECV,
7040 	WOW_REASON_PATTERN_MATCH_FOUND,
7041 	WOW_REASON_RECV_MAGIC_PATTERN,
7042 	WOW_REASON_P2P_DISC,
7043 	WOW_REASON_WLAN_HB,
7044 	WOW_REASON_CSA_EVENT,
7045 	WOW_REASON_PROBE_REQ_WPS_IE_RECV,
7046 	WOW_REASON_AUTH_REQ_RECV,
7047 	WOW_REASON_ASSOC_REQ_RECV,
7048 	WOW_REASON_HTT_EVENT,
7049 	WOW_REASON_RA_MATCH,
7050 	WOW_REASON_HOST_AUTO_SHUTDOWN,
7051 	WOW_REASON_IOAC_MAGIC_EVENT,
7052 	WOW_REASON_IOAC_SHORT_EVENT,
7053 	WOW_REASON_IOAC_EXTEND_EVENT,
7054 	WOW_REASON_IOAC_TIMER_EVENT,
7055 	WOW_REASON_ROAM_HO,
7056 	WOW_REASON_DFS_PHYERR_RADADR_EVENT,
7057 	WOW_REASON_BEACON_RECV,
7058 	WOW_REASON_CLIENT_KICKOUT_EVENT,
7059 	WOW_REASON_DEBUG_TEST = 0xFF,
7060 };
7061 
wow_reason(enum wmi_wow_wake_reason reason)7062 static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
7063 {
7064 	switch (reason) {
7065 	C2S(WOW_REASON_UNSPECIFIED);
7066 	C2S(WOW_REASON_NLOD);
7067 	C2S(WOW_REASON_AP_ASSOC_LOST);
7068 	C2S(WOW_REASON_LOW_RSSI);
7069 	C2S(WOW_REASON_DEAUTH_RECVD);
7070 	C2S(WOW_REASON_DISASSOC_RECVD);
7071 	C2S(WOW_REASON_GTK_HS_ERR);
7072 	C2S(WOW_REASON_EAP_REQ);
7073 	C2S(WOW_REASON_FOURWAY_HS_RECV);
7074 	C2S(WOW_REASON_TIMER_INTR_RECV);
7075 	C2S(WOW_REASON_PATTERN_MATCH_FOUND);
7076 	C2S(WOW_REASON_RECV_MAGIC_PATTERN);
7077 	C2S(WOW_REASON_P2P_DISC);
7078 	C2S(WOW_REASON_WLAN_HB);
7079 	C2S(WOW_REASON_CSA_EVENT);
7080 	C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
7081 	C2S(WOW_REASON_AUTH_REQ_RECV);
7082 	C2S(WOW_REASON_ASSOC_REQ_RECV);
7083 	C2S(WOW_REASON_HTT_EVENT);
7084 	C2S(WOW_REASON_RA_MATCH);
7085 	C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
7086 	C2S(WOW_REASON_IOAC_MAGIC_EVENT);
7087 	C2S(WOW_REASON_IOAC_SHORT_EVENT);
7088 	C2S(WOW_REASON_IOAC_EXTEND_EVENT);
7089 	C2S(WOW_REASON_IOAC_TIMER_EVENT);
7090 	C2S(WOW_REASON_ROAM_HO);
7091 	C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
7092 	C2S(WOW_REASON_BEACON_RECV);
7093 	C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
7094 	C2S(WOW_REASON_DEBUG_TEST);
7095 	default:
7096 		return NULL;
7097 	}
7098 }
7099 
7100 #undef C2S
7101 
7102 struct wmi_wow_ev_arg {
7103 	u32 vdev_id;
7104 	u32 flag;
7105 	enum wmi_wow_wake_reason wake_reason;
7106 	u32 data_len;
7107 };
7108 
7109 #define WOW_MIN_PATTERN_SIZE	1
7110 #define WOW_MAX_PATTERN_SIZE	148
7111 #define WOW_MAX_PKT_OFFSET	128
7112 #define WOW_HDR_LEN	(sizeof(struct ieee80211_hdr_3addr) + \
7113 	sizeof(struct rfc1042_hdr))
7114 #define WOW_MAX_REDUCE	(WOW_HDR_LEN - sizeof(struct ethhdr) - \
7115 	offsetof(struct ieee80211_hdr_3addr, addr1))
7116 
7117 enum wmi_tdls_state {
7118 	WMI_TDLS_DISABLE,
7119 	WMI_TDLS_ENABLE_PASSIVE,
7120 	WMI_TDLS_ENABLE_ACTIVE,
7121 	WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
7122 };
7123 
7124 enum wmi_tdls_peer_state {
7125 	WMI_TDLS_PEER_STATE_PEERING,
7126 	WMI_TDLS_PEER_STATE_CONNECTED,
7127 	WMI_TDLS_PEER_STATE_TEARDOWN,
7128 };
7129 
7130 struct wmi_tdls_peer_update_cmd_arg {
7131 	u32 vdev_id;
7132 	enum wmi_tdls_peer_state peer_state;
7133 	u8 addr[ETH_ALEN];
7134 };
7135 
7136 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
7137 
7138 #define WMI_TDLS_PEER_SP_MASK	0x60
7139 #define WMI_TDLS_PEER_SP_LSB	5
7140 
7141 enum wmi_tdls_options {
7142 	WMI_TDLS_OFFCHAN_EN = BIT(0),
7143 	WMI_TDLS_BUFFER_STA_EN = BIT(1),
7144 	WMI_TDLS_SLEEP_STA_EN = BIT(2),
7145 };
7146 
7147 enum {
7148 	WMI_TDLS_PEER_QOS_AC_VO = BIT(0),
7149 	WMI_TDLS_PEER_QOS_AC_VI = BIT(1),
7150 	WMI_TDLS_PEER_QOS_AC_BK = BIT(2),
7151 	WMI_TDLS_PEER_QOS_AC_BE = BIT(3),
7152 };
7153 
7154 struct wmi_tdls_peer_capab_arg {
7155 	u8 peer_uapsd_queues;
7156 	u8 peer_max_sp;
7157 	u32 buff_sta_support;
7158 	u32 off_chan_support;
7159 	u32 peer_curr_operclass;
7160 	u32 self_curr_operclass;
7161 	u32 peer_chan_len;
7162 	u32 peer_operclass_len;
7163 	u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7164 	u32 is_peer_responder;
7165 	u32 pref_offchan_num;
7166 	u32 pref_offchan_bw;
7167 };
7168 
7169 struct wmi_10_4_tdls_set_state_cmd {
7170 	__le32 vdev_id;
7171 	__le32 state;
7172 	__le32 notification_interval_ms;
7173 	__le32 tx_discovery_threshold;
7174 	__le32 tx_teardown_threshold;
7175 	__le32 rssi_teardown_threshold;
7176 	__le32 rssi_delta;
7177 	__le32 tdls_options;
7178 	__le32 tdls_peer_traffic_ind_window;
7179 	__le32 tdls_peer_traffic_response_timeout_ms;
7180 	__le32 tdls_puapsd_mask;
7181 	__le32 tdls_puapsd_inactivity_time_ms;
7182 	__le32 tdls_puapsd_rx_frame_threshold;
7183 	__le32 teardown_notification_ms;
7184 	__le32 tdls_peer_kickout_threshold;
7185 } __packed;
7186 
7187 struct wmi_tdls_peer_capabilities {
7188 	__le32 peer_qos;
7189 	__le32 buff_sta_support;
7190 	__le32 off_chan_support;
7191 	__le32 peer_curr_operclass;
7192 	__le32 self_curr_operclass;
7193 	__le32 peer_chan_len;
7194 	__le32 peer_operclass_len;
7195 	u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7196 	__le32 is_peer_responder;
7197 	__le32 pref_offchan_num;
7198 	__le32 pref_offchan_bw;
7199 	struct wmi_channel peer_chan_list[1];
7200 } __packed;
7201 
7202 struct wmi_10_4_tdls_peer_update_cmd {
7203 	__le32 vdev_id;
7204 	struct wmi_mac_addr peer_macaddr;
7205 	__le32 peer_state;
7206 	__le32 reserved[4];
7207 	struct wmi_tdls_peer_capabilities peer_capab;
7208 } __packed;
7209 
7210 enum wmi_tdls_peer_reason {
7211 	WMI_TDLS_TEARDOWN_REASON_TX,
7212 	WMI_TDLS_TEARDOWN_REASON_RSSI,
7213 	WMI_TDLS_TEARDOWN_REASON_SCAN,
7214 	WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE,
7215 	WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT,
7216 	WMI_TDLS_TEARDOWN_REASON_BAD_PTR,
7217 	WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE,
7218 	WMI_TDLS_ENTER_BUF_STA,
7219 	WMI_TDLS_EXIT_BUF_STA,
7220 	WMI_TDLS_ENTER_BT_BUSY_MODE,
7221 	WMI_TDLS_EXIT_BT_BUSY_MODE,
7222 	WMI_TDLS_SCAN_STARTED_EVENT,
7223 	WMI_TDLS_SCAN_COMPLETED_EVENT,
7224 };
7225 
7226 enum wmi_tdls_peer_notification {
7227 	WMI_TDLS_SHOULD_DISCOVER,
7228 	WMI_TDLS_SHOULD_TEARDOWN,
7229 	WMI_TDLS_PEER_DISCONNECTED,
7230 	WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION,
7231 };
7232 
7233 struct wmi_tdls_peer_event {
7234 	struct wmi_mac_addr peer_macaddr;
7235 	/* see enum wmi_tdls_peer_notification*/
7236 	__le32 peer_status;
7237 	/* see enum wmi_tdls_peer_reason */
7238 	__le32 peer_reason;
7239 	__le32 vdev_id;
7240 } __packed;
7241 
7242 enum wmi_tid_aggr_control_conf {
7243 	WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
7244 	WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
7245 	WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
7246 };
7247 
7248 enum wmi_noack_tid_conf {
7249 	WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
7250 	WMI_PEER_TID_CONFIG_ACK,
7251 	WMI_PEER_TID_CONFIG_NOACK,
7252 };
7253 
7254 enum wmi_tid_rate_ctrl_conf {
7255 	WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
7256 	WMI_TID_CONFIG_RATE_CONTROL_AUTO,
7257 	WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
7258 	WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
7259 	WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,
7260 };
7261 
7262 enum wmi_tid_rtscts_control_conf {
7263 	WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,
7264 	WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,
7265 };
7266 
7267 enum wmi_ext_tid_config_map {
7268 	WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),
7269 };
7270 
7271 struct wmi_per_peer_per_tid_cfg_arg {
7272 	u32 vdev_id;
7273 	struct wmi_mac_addr peer_macaddr;
7274 	u32 tid;
7275 	enum wmi_noack_tid_conf ack_policy;
7276 	enum wmi_tid_aggr_control_conf aggr_control;
7277 	u8 rate_ctrl;
7278 	u32 retry_count;
7279 	u32 rcode_flags;
7280 	u32 ext_tid_cfg_bitmap;
7281 	u32 rtscts_ctrl;
7282 };
7283 
7284 struct wmi_peer_per_tid_cfg_cmd {
7285 	__le32 vdev_id;
7286 	struct wmi_mac_addr peer_macaddr;
7287 	__le32 tid;
7288 
7289 	/* see enum wmi_noack_tid_conf */
7290 	__le32 ack_policy;
7291 
7292 	/* see enum wmi_tid_aggr_control_conf */
7293 	__le32 aggr_control;
7294 
7295 	/* see enum wmi_tid_rate_ctrl_conf */
7296 	__le32 rate_control;
7297 	__le32 rcode_flags;
7298 	__le32 retry_count;
7299 
7300 	/* See enum wmi_ext_tid_config_map */
7301 	__le32 ext_tid_cfg_bitmap;
7302 
7303 	/* see enum wmi_tid_rtscts_control_conf */
7304 	__le32 rtscts_ctrl;
7305 } __packed;
7306 
7307 enum wmi_txbf_conf {
7308 	WMI_TXBF_CONF_UNSUPPORTED,
7309 	WMI_TXBF_CONF_BEFORE_ASSOC,
7310 	WMI_TXBF_CONF_AFTER_ASSOC,
7311 };
7312 
7313 #define	WMI_CCA_DETECT_LEVEL_AUTO	0
7314 #define	WMI_CCA_DETECT_MARGIN_AUTO	0
7315 
7316 struct wmi_pdev_set_adaptive_cca_params {
7317 	__le32 enable;
7318 	__le32 cca_detect_level;
7319 	__le32 cca_detect_margin;
7320 } __packed;
7321 
7322 #define WMI_PNO_MAX_SCHED_SCAN_PLANS      2
7323 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT   7200
7324 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100
7325 #define WMI_PNO_MAX_NETW_CHANNELS         26
7326 #define WMI_PNO_MAX_NETW_CHANNELS_EX      60
7327 #define WMI_PNO_MAX_SUPP_NETWORKS         WLAN_SCAN_PARAMS_MAX_SSID
7328 #define WMI_PNO_MAX_IE_LENGTH             WLAN_SCAN_PARAMS_MAX_IE_LEN
7329 
7330 /*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/
7331 #define WMI_PNO_MAX_PB_REQ_SIZE    450
7332 
7333 #define WMI_PNO_24G_DEFAULT_CH     1
7334 #define WMI_PNO_5G_DEFAULT_CH      36
7335 
7336 #define WMI_ACTIVE_MAX_CHANNEL_TIME 40
7337 #define WMI_PASSIVE_MAX_CHANNEL_TIME   110
7338 
7339 /* SSID broadcast type */
7340 enum wmi_SSID_bcast_type {
7341 	BCAST_UNKNOWN      = 0,
7342 	BCAST_NORMAL       = 1,
7343 	BCAST_HIDDEN       = 2,
7344 };
7345 
7346 struct wmi_network_type {
7347 	struct wmi_ssid ssid;
7348 	u32 authentication;
7349 	u32 encryption;
7350 	u32 bcast_nw_type;
7351 	u8 channel_count;
7352 	u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX];
7353 	s32 rssi_threshold;
7354 } __packed;
7355 
7356 struct wmi_pno_scan_req {
7357 	u8 enable;
7358 	u8 vdev_id;
7359 	u8 uc_networks_count;
7360 	struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS];
7361 	u32 fast_scan_period;
7362 	u32 slow_scan_period;
7363 	u8 fast_scan_max_cycles;
7364 
7365 	bool do_passive_scan;
7366 
7367 	u32 delay_start_time;
7368 	u32 active_min_time;
7369 	u32 active_max_time;
7370 	u32 passive_min_time;
7371 	u32 passive_max_time;
7372 
7373 	/* mac address randomization attributes */
7374 	u32 enable_pno_scan_randomization;
7375 	u8 mac_addr[ETH_ALEN];
7376 	u8 mac_addr_mask[ETH_ALEN];
7377 } __packed;
7378 
7379 enum wmi_host_platform_type {
7380 	WMI_HOST_PLATFORM_HIGH_PERF,
7381 	WMI_HOST_PLATFORM_LOW_PERF,
7382 };
7383 
7384 enum wmi_bss_survey_req_type {
7385 	WMI_BSS_SURVEY_REQ_TYPE_READ = 1,
7386 	WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
7387 };
7388 
7389 struct wmi_pdev_chan_info_req_cmd {
7390 	__le32 type;
7391 	__le32 reserved;
7392 } __packed;
7393 
7394 /* bb timing register configurations */
7395 struct wmi_bb_timing_cfg_arg {
7396 	/* Tx_end to pa off timing */
7397 	u32 bb_tx_timing;
7398 
7399 	/* Tx_end to external pa off timing */
7400 	u32 bb_xpa_timing;
7401 };
7402 
7403 struct wmi_pdev_bb_timing_cfg_cmd {
7404 	/* Tx_end to pa off timing */
7405 	__le32 bb_tx_timing;
7406 
7407 	/* Tx_end to external pa off timing */
7408 	__le32 bb_xpa_timing;
7409 } __packed;
7410 
7411 struct ath10k;
7412 struct ath10k_vif;
7413 struct ath10k_fw_stats_pdev;
7414 struct ath10k_fw_stats_peer;
7415 struct ath10k_fw_stats;
7416 
7417 int ath10k_wmi_attach(struct ath10k *ar);
7418 void ath10k_wmi_detach(struct ath10k *ar);
7419 void ath10k_wmi_free_host_mem(struct ath10k *ar);
7420 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
7421 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
7422 
7423 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
7424 int ath10k_wmi_connect(struct ath10k *ar);
7425 
7426 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
7427 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
7428 			       u32 cmd_id);
7429 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg);
7430 
7431 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
7432 				     struct ath10k_fw_stats_pdev *dst);
7433 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
7434 				   struct ath10k_fw_stats_pdev *dst);
7435 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
7436 				   struct ath10k_fw_stats_pdev *dst);
7437 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
7438 				      struct ath10k_fw_stats_pdev *dst);
7439 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
7440 				struct ath10k_fw_stats_peer *dst);
7441 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
7442 				    struct wmi_host_mem_chunks *chunks);
7443 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
7444 				      const struct wmi_start_scan_arg *arg);
7445 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
7446 			      const struct wmi_wmm_params_arg *arg);
7447 void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
7448 				const struct wmi_channel_arg *arg);
7449 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
7450 
7451 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
7452 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
7453 int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb);
7454 int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb);
7455 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
7456 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
7457 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
7458 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
7459 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
7460 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
7461 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
7462 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
7463 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
7464 void ath10k_wmi_event_dfs(struct ath10k *ar,
7465 			  struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
7466 void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
7467 				    struct wmi_phyerr_ev_arg *phyerr,
7468 				    u64 tsf);
7469 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
7470 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
7471 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
7472 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
7473 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
7474 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
7475 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
7476 					     struct sk_buff *skb);
7477 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
7478 					     struct sk_buff *skb);
7479 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
7480 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
7481 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
7482 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
7483 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
7484 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
7485 					 struct sk_buff *skb);
7486 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
7487 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
7488 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
7489 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
7490 						struct sk_buff *skb);
7491 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
7492 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
7493 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
7494 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
7495 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
7496 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb);
7497 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
7498 				 int left_len, struct wmi_phyerr_ev_arg *arg);
7499 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
7500 				      struct ath10k_fw_stats *fw_stats,
7501 				      char *buf);
7502 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
7503 				     struct ath10k_fw_stats *fw_stats,
7504 				     char *buf);
7505 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head);
7506 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
7507 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
7508 				      struct ath10k_fw_stats *fw_stats,
7509 				      char *buf);
7510 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
7511 				   enum wmi_vdev_subtype subtype);
7512 int ath10k_wmi_barrier(struct ath10k *ar);
7513 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table,
7514 					 u32 num_tx_chain);
7515 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb);
7516 
7517 #endif /* _WMI_H_ */
7518