1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef SCSI_TRANSPORT_SAS_H
3 #define SCSI_TRANSPORT_SAS_H
4
5 #include <linux/transport_class.h>
6 #include <linux/types.h>
7 #include <linux/mutex.h>
8 #include <scsi/sas.h>
9 #include <linux/bsg-lib.h>
10
11 struct scsi_transport_template;
12 struct sas_rphy;
13 struct request;
14
15 #if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS)
scsi_is_sas_rphy(const struct device * sdev)16 static inline int scsi_is_sas_rphy(const struct device *sdev)
17 {
18 return 0;
19 }
20 #else
21 extern int scsi_is_sas_rphy(const struct device *);
22 #endif
23
sas_protocol_ata(enum sas_protocol proto)24 static inline int sas_protocol_ata(enum sas_protocol proto)
25 {
26 return ((proto & SAS_PROTOCOL_SATA) ||
27 (proto & SAS_PROTOCOL_STP))? 1 : 0;
28 }
29
30 enum sas_linkrate {
31 /* These Values are defined in the SAS standard */
32 SAS_LINK_RATE_UNKNOWN = 0,
33 SAS_PHY_DISABLED = 1,
34 SAS_PHY_RESET_PROBLEM = 2,
35 SAS_SATA_SPINUP_HOLD = 3,
36 SAS_SATA_PORT_SELECTOR = 4,
37 SAS_PHY_RESET_IN_PROGRESS = 5,
38 SAS_LINK_RATE_1_5_GBPS = 8,
39 SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
40 SAS_LINK_RATE_3_0_GBPS = 9,
41 SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
42 SAS_LINK_RATE_6_0_GBPS = 10,
43 SAS_LINK_RATE_12_0_GBPS = 11,
44 SAS_LINK_RATE_22_5_GBPS = 12,
45 /* These are virtual to the transport class and may never
46 * be signalled normally since the standard defined field
47 * is only 4 bits */
48 SAS_LINK_RATE_FAILED = 0x10,
49 SAS_PHY_VIRTUAL = 0x11,
50 };
51
52 struct sas_identify {
53 enum sas_device_type device_type;
54 enum sas_protocol initiator_port_protocols;
55 enum sas_protocol target_port_protocols;
56 u64 sas_address;
57 u8 phy_identifier;
58 };
59
60 struct sas_phy {
61 struct device dev;
62 int number;
63 int enabled;
64
65 /* phy identification */
66 struct sas_identify identify;
67
68 /* phy attributes */
69 enum sas_linkrate negotiated_linkrate;
70 enum sas_linkrate minimum_linkrate_hw;
71 enum sas_linkrate minimum_linkrate;
72 enum sas_linkrate maximum_linkrate_hw;
73 enum sas_linkrate maximum_linkrate;
74
75 /* link error statistics */
76 u32 invalid_dword_count;
77 u32 running_disparity_error_count;
78 u32 loss_of_dword_sync_count;
79 u32 phy_reset_problem_count;
80
81 /* for the list of phys belonging to a port */
82 struct list_head port_siblings;
83
84 /* available to the lldd */
85 void *hostdata;
86 };
87
88 #define dev_to_phy(d) \
89 container_of((d), struct sas_phy, dev)
90 #define transport_class_to_phy(dev) \
91 dev_to_phy((dev)->parent)
92 #define phy_to_shost(phy) \
93 dev_to_shost((phy)->dev.parent)
94
95 struct request_queue;
96 struct sas_rphy {
97 struct device dev;
98 struct sas_identify identify;
99 struct list_head list;
100 struct request_queue *q;
101 u32 scsi_target_id;
102 };
103
104 #define dev_to_rphy(d) \
105 container_of((d), struct sas_rphy, dev)
106 #define transport_class_to_rphy(dev) \
107 dev_to_rphy((dev)->parent)
108 #define rphy_to_shost(rphy) \
109 dev_to_shost((rphy)->dev.parent)
110 #define target_to_rphy(targ) \
111 dev_to_rphy((targ)->dev.parent)
112
113 struct sas_end_device {
114 struct sas_rphy rphy;
115 /* flags */
116 unsigned ready_led_meaning:1;
117 unsigned tlr_supported:1;
118 unsigned tlr_enabled:1;
119 /* parameters */
120 u16 I_T_nexus_loss_timeout;
121 u16 initiator_response_timeout;
122 };
123 #define rphy_to_end_device(r) \
124 container_of((r), struct sas_end_device, rphy)
125
126 struct sas_expander_device {
127 int level;
128 int next_port_id;
129
130 #define SAS_EXPANDER_VENDOR_ID_LEN 8
131 char vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
132 #define SAS_EXPANDER_PRODUCT_ID_LEN 16
133 char product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
134 #define SAS_EXPANDER_PRODUCT_REV_LEN 4
135 char product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
136 #define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN 8
137 char component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
138 u16 component_id;
139 u8 component_revision_id;
140
141 struct sas_rphy rphy;
142
143 };
144 #define rphy_to_expander_device(r) \
145 container_of((r), struct sas_expander_device, rphy)
146
147 struct sas_port {
148 struct device dev;
149
150 int port_identifier;
151 int num_phys;
152 /* port flags */
153 unsigned int is_backlink:1;
154
155 /* the other end of the link */
156 struct sas_rphy *rphy;
157
158 struct mutex phy_list_mutex;
159 struct list_head phy_list;
160 struct list_head del_list; /* libsas only */
161 };
162
163 #define dev_to_sas_port(d) \
164 container_of((d), struct sas_port, dev)
165 #define transport_class_to_sas_port(dev) \
166 dev_to_sas_port((dev)->parent)
167
168 struct sas_phy_linkrates {
169 enum sas_linkrate maximum_linkrate;
170 enum sas_linkrate minimum_linkrate;
171 };
172
173 /* The functions by which the transport class and the driver communicate */
174 struct sas_function_template {
175 int (*get_linkerrors)(struct sas_phy *);
176 int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
177 int (*get_bay_identifier)(struct sas_rphy *);
178 int (*phy_reset)(struct sas_phy *, int);
179 int (*phy_enable)(struct sas_phy *, int);
180 int (*phy_setup)(struct sas_phy *);
181 void (*phy_release)(struct sas_phy *);
182 int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
183 void (*smp_handler)(struct bsg_job *, struct Scsi_Host *,
184 struct sas_rphy *);
185 };
186
187
188 void sas_remove_children(struct device *);
189 extern void sas_remove_host(struct Scsi_Host *);
190
191 extern struct sas_phy *sas_phy_alloc(struct device *, int);
192 extern void sas_phy_free(struct sas_phy *);
193 extern int sas_phy_add(struct sas_phy *);
194 extern void sas_phy_delete(struct sas_phy *);
195 extern int scsi_is_sas_phy(const struct device *);
196
197 u64 sas_get_address(struct scsi_device *);
198 unsigned int sas_tlr_supported(struct scsi_device *);
199 unsigned int sas_is_tlr_enabled(struct scsi_device *);
200 void sas_disable_tlr(struct scsi_device *);
201 void sas_enable_tlr(struct scsi_device *);
202
203 extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
204 extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
205 void sas_rphy_free(struct sas_rphy *);
206 extern int sas_rphy_add(struct sas_rphy *);
207 extern void sas_rphy_remove(struct sas_rphy *);
208 extern void sas_rphy_delete(struct sas_rphy *);
209 extern void sas_rphy_unlink(struct sas_rphy *);
210
211 struct sas_port *sas_port_alloc(struct device *, int);
212 struct sas_port *sas_port_alloc_num(struct device *);
213 int sas_port_add(struct sas_port *);
214 void sas_port_free(struct sas_port *);
215 void sas_port_delete(struct sas_port *);
216 void sas_port_add_phy(struct sas_port *, struct sas_phy *);
217 void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
218 void sas_port_mark_backlink(struct sas_port *);
219 int scsi_is_sas_port(const struct device *);
220 struct sas_phy *sas_port_get_phy(struct sas_port *port);
sas_port_put_phy(struct sas_phy * phy)221 static inline void sas_port_put_phy(struct sas_phy *phy)
222 {
223 if (phy)
224 put_device(&phy->dev);
225 }
226
227 extern struct scsi_transport_template *
228 sas_attach_transport(struct sas_function_template *);
229 extern void sas_release_transport(struct scsi_transport_template *);
230 int sas_read_port_mode_page(struct scsi_device *);
231
232 static inline int
scsi_is_sas_expander_device(struct device * dev)233 scsi_is_sas_expander_device(struct device *dev)
234 {
235 struct sas_rphy *rphy;
236 if (!scsi_is_sas_rphy(dev))
237 return 0;
238 rphy = dev_to_rphy(dev);
239 return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
240 rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
241 }
242
243 #define scsi_is_sas_phy_local(phy) scsi_is_host_device((phy)->dev.parent)
244
245 #endif /* SCSI_TRANSPORT_SAS_H */
246