1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
2 /* Copyright(c) 2007 - 2012 Realtek Corporation. */
3 
4 /*-----------------------------------------------------------------------------
5 
6 	For type defines and data structure defines
7 
8 ------------------------------------------------------------------------------*/
9 
10 #ifndef __DRV_TYPES_H__
11 #define __DRV_TYPES_H__
12 
13 #include "osdep_service.h"
14 #include "wlan_bssdef.h"
15 #include "rtw_ht.h"
16 #include "rtw_cmd.h"
17 #include "rtw_xmit.h"
18 #include "rtw_recv.h"
19 #include "hal_intf.h"
20 #include "hal_com.h"
21 #include "rtw_security.h"
22 #include "rtw_pwrctrl.h"
23 #include "rtw_io.h"
24 #include "rtw_eeprom.h"
25 #include "sta_info.h"
26 #include "rtw_mlme.h"
27 #include "rtw_rf.h"
28 #include "rtw_event.h"
29 #include "rtw_led.h"
30 #include "rtw_mlme_ext.h"
31 #include "rtw_p2p.h"
32 #include "rtw_ap.h"
33 #include "rtw_br_ext.h"
34 #include "rtl8188e_hal.h"
35 #include "rtw_fw.h"
36 
37 #define FW_RTL8188EU	"rtlwifi/rtl8188eufw.bin"
38 
39 struct registry_priv {
40 	u8	rfintfs;
41 	u8	lbkmode;
42 	u8	hci;
43 	struct ndis_802_11_ssid	ssid;
44 	u8	network_mode;	/* infra, ad-hoc, auto */
45 	u8	channel;/* ad-hoc support requirement */
46 	u8	wireless_mode;/* A, B, G, auto */
47 	u8	scan_mode;/* active, passive */
48 	u8	radio_enable;
49 	u8	preamble;/* long, short, auto */
50 	u8	vrtl_carrier_sense;/* Enable, Disable, Auto */
51 	u8	vcs_type;/* RTS/CTS, CTS-to-self */
52 	u16	rts_thresh;
53 	u16	frag_thresh;
54 	u8	adhoc_tx_pwr;
55 	u8	soft_ap;
56 	u8	power_mgnt;
57 	u8	ips_mode;
58 	u8	smart_ps;
59 	u8	long_retry_lmt;
60 	u8	short_retry_lmt;
61 	u16	busy_thresh;
62 	u8	ack_policy;
63 	u8	software_encrypt;
64 	u8	software_decrypt;
65 	u8	acm_method;
66 	  /* UAPSD */
67 	u8	wmm_enable;
68 	u8	uapsd_enable;
69 	u8	uapsd_max_sp;
70 	u8	uapsd_acbk_en;
71 	u8	uapsd_acbe_en;
72 	u8	uapsd_acvi_en;
73 	u8	uapsd_acvo_en;
74 
75 	u8	led_enable;
76 
77 	struct wlan_bssid_ex    dev_network;
78 
79 	u8	ht_enable;
80 	u8	cbw40_enable;
81 	u8	ampdu_enable;/* for tx */
82 	u8	rx_stbc;
83 	u8	ampdu_amsdu;/* A-MPDU Supports A-MSDU is permitted */
84 	u8	lowrate_two_xmit;
85 
86 	u8	low_power;
87 
88 	u8	wifi_spec;/*  !turbo_mode */
89 
90 	u8	channel_plan;
91 	bool	bAcceptAddbaReq;
92 
93 	u8	antdiv_cfg;
94 	u8	antdiv_type;
95 
96 	u8	usbss_enable;/* 0:disable,1:enable */
97 	u8	hwpdn_mode;/* 0:disable,1:enable,2:decide by EFUSE config */
98 	u8	hwpwrp_detect;/* 0:disable,1:enable */
99 
100 	u8	hw_wps_pbc;/* 0:disable,1:enable */
101 
102 	u8	max_roaming_times; /*  the max number driver will try */
103 
104 	u8	fw_iol; /* enable iol without other concern */
105 
106 	u8	enable80211d;
107 
108 	u8	ifname[16];
109 	u8	if2name[16];
110 
111 	u8	notch_filter;
112 };
113 
114 #define MAX_CONTINUAL_URB_ERR		4
115 
116 struct dvobj_priv {
117 	struct adapter *if1;
118 
119 	/* For 92D, DMDP have 2 interface. */
120 	u8	InterfaceNumber;
121 	u8	NumInterfaces;
122 
123 	/* In /Out Pipe information */
124 	int	RtInPipe;
125 	int	RtOutPipe[3];
126 	u8	Queue2Pipe[HW_QUEUE_ENTRY];/* for out pipe mapping */
127 
128 	struct rt_firmware firmware;
129 
130 /*-------- below is for USB INTERFACE --------*/
131 
132 	u8	RtNumOutPipes;
133 
134 	struct usb_interface *pusbintf;
135 	struct usb_device *pusbdev;
136 
137 	atomic_t continual_urb_error;
138 };
139 
dvobj_to_dev(struct dvobj_priv * dvobj)140 static inline struct device *dvobj_to_dev(struct dvobj_priv *dvobj)
141 {
142 	/* todo: get interface type from dvobj and the return
143 	 * the dev accordingly */
144 	return &dvobj->pusbintf->dev;
145 };
146 
147 struct adapter {
148 	int	pid[3];/* process id from UI, 0:wps, 1:hostapd, 2:dhcpcd */
149 
150 	struct dvobj_priv *dvobj;
151 	struct	mlme_priv mlmepriv;
152 	struct	mlme_ext_priv mlmeextpriv;
153 	struct	cmd_priv	cmdpriv;
154 	struct	evt_priv	evtpriv;
155 	struct	io_priv	iopriv;
156 	struct	xmit_priv	xmitpriv;
157 	struct	recv_priv	recvpriv;
158 	struct	sta_priv	stapriv;
159 	struct	security_priv	securitypriv;
160 	struct	registry_priv	registrypriv;
161 	struct	pwrctrl_priv	pwrctrlpriv;
162 	struct	eeprom_priv eeprompriv;
163 	struct	led_priv	ledpriv;
164 	struct wifidirect_info	wdinfo;
165 
166 	struct hal_data_8188e haldata;
167 
168 	s32	bDriverStopped;
169 	s32	bSurpriseRemoved;
170 	s32	bCardDisableWOHSM;
171 
172 	u8	hw_init_completed;
173 	s8	signal_strength;
174 
175 	void *cmdThread;
176 	void (*intf_start)(struct adapter *adapter);
177 	void (*intf_stop)(struct adapter *adapter);
178 	struct  net_device *pnetdev;
179 
180 	/*  used by rtw_rereg_nd_name related function */
181 	struct rereg_nd_name_data {
182 		struct  net_device *old_pnetdev;
183 		char old_ifname[IFNAMSIZ];
184 		u8 old_ips_mode;
185 		u8 old_bRegUseLed;
186 	} rereg_nd_name_priv;
187 
188 	int bup;
189 	struct net_device_stats stats;
190 	struct iw_statistics iwstats;
191 	struct proc_dir_entry *dir_dev;/*  for proc directory */
192 
193 	int net_closed;
194 	u8 bFWReady;
195 	u8 bReadPortCancel;
196 	u8 bWritePortCancel;
197 	u8 bRxRSSIDisplay;
198 	/* The driver will show up the desired channel number
199 	 * when this flag is 1. */
200 	u8 bNotifyChannelChange;
201 	/* The driver will show the current P2P status when the
202 	 * upper application reads it. */
203 	u8 bShowGetP2PState;
204 	struct adapter *pbuddy_adapter;
205 
206 	struct mutex *hw_init_mutex;
207 
208 	spinlock_t br_ext_lock;
209 	struct nat25_network_db_entry	*nethash[NAT25_HASH_SIZE];
210 	int				pppoe_connection_in_progress;
211 	unsigned char			pppoe_addr[ETH_ALEN];
212 	unsigned char			scdb_mac[ETH_ALEN];
213 	unsigned char			scdb_ip[4];
214 	struct nat25_network_db_entry	*scdb_entry;
215 	unsigned char			br_mac[ETH_ALEN];
216 	unsigned char			br_ip[4];
217 	struct br_ext_info		ethBrExtInfo;
218 };
219 
220 #define adapter_to_dvobj(adapter) (adapter->dvobj)
221 
222 void rtw_handle_dualmac(struct adapter *adapter, bool init);
223 
myid(struct eeprom_priv * peepriv)224 static inline u8 *myid(struct eeprom_priv *peepriv)
225 {
226 	return peepriv->mac_addr;
227 }
228 
229 #endif /* __DRV_TYPES_H__ */
230