1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * Copyright (c) 2015 MediaTek Inc.
4 * Author:
5 * Zhigang.Wei <zhigang.wei@mediatek.com>
6 * Chunfeng.Yun <chunfeng.yun@mediatek.com>
7 */
8
9 #ifndef _XHCI_MTK_H_
10 #define _XHCI_MTK_H_
11
12 #include <linux/clk.h>
13 #include <linux/hashtable.h>
14 #include <linux/regulator/consumer.h>
15
16 #include "xhci.h"
17
18 #define BULK_CLKS_NUM 5
19 #define BULK_VREGS_NUM 2
20
21 /* support at most 64 ep, use 32 size hash table */
22 #define SCH_EP_HASH_BITS 5
23
24 /**
25 * To simplify scheduler algorithm, set a upper limit for ESIT,
26 * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT,
27 * round down to the limit value, that means allocating more
28 * bandwidth to it.
29 */
30 #define XHCI_MTK_MAX_ESIT (1 << 6)
31 #define XHCI_MTK_BW_INDEX(x) ((x) & (XHCI_MTK_MAX_ESIT - 1))
32
33 /**
34 * @fs_bus_bw: array to keep track of bandwidth already used for FS
35 * @ep_list: Endpoints using this TT
36 */
37 struct mu3h_sch_tt {
38 u32 fs_bus_bw[XHCI_MTK_MAX_ESIT];
39 struct list_head ep_list;
40 };
41
42 /**
43 * struct mu3h_sch_bw_info: schedule information for bandwidth domain
44 *
45 * @bus_bw: array to keep track of bandwidth already used at each uframes
46 *
47 * treat a HS root port as a bandwidth domain, but treat a SS root port as
48 * two bandwidth domains, one for IN eps and another for OUT eps.
49 */
50 struct mu3h_sch_bw_info {
51 u32 bus_bw[XHCI_MTK_MAX_ESIT];
52 };
53
54 /**
55 * struct mu3h_sch_ep_info: schedule information for endpoint
56 *
57 * @esit: unit is 125us, equal to 2 << Interval field in ep-context
58 * @num_esit: number of @esit in a period
59 * @num_budget_microframes: number of continuous uframes
60 * (@repeat==1) scheduled within the interval
61 * @bw_cost_per_microframe: bandwidth cost per microframe
62 * @hentry: hash table entry
63 * @endpoint: linked into bandwidth domain which it belongs to
64 * @tt_endpoint: linked into mu3h_sch_tt's list which it belongs to
65 * @bw_info: bandwidth domain which this endpoint belongs
66 * @sch_tt: mu3h_sch_tt linked into
67 * @ep_type: endpoint type
68 * @maxpkt: max packet size of endpoint
69 * @ep: address of usb_host_endpoint struct
70 * @allocated: the bandwidth is aready allocated from bus_bw
71 * @offset: which uframe of the interval that transfer should be
72 * scheduled first time within the interval
73 * @repeat: the time gap between two uframes that transfers are
74 * scheduled within a interval. in the simple algorithm, only
75 * assign 0 or 1 to it; 0 means using only one uframe in a
76 * interval, and 1 means using @num_budget_microframes
77 * continuous uframes
78 * @pkts: number of packets to be transferred in the scheduled uframes
79 * @cs_count: number of CS that host will trigger
80 * @burst_mode: burst mode for scheduling. 0: normal burst mode,
81 * distribute the bMaxBurst+1 packets for a single burst
82 * according to @pkts and @repeat, repeate the burst multiple
83 * times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets
84 * according to @pkts and @repeat. normal mode is used by
85 * default
86 */
87 struct mu3h_sch_ep_info {
88 u32 esit;
89 u32 num_esit;
90 u32 num_budget_microframes;
91 u32 bw_cost_per_microframe;
92 struct list_head endpoint;
93 struct hlist_node hentry;
94 struct list_head tt_endpoint;
95 struct mu3h_sch_bw_info *bw_info;
96 struct mu3h_sch_tt *sch_tt;
97 u32 ep_type;
98 u32 maxpkt;
99 struct usb_host_endpoint *ep;
100 enum usb_device_speed speed;
101 bool allocated;
102 /*
103 * mtk xHCI scheduling information put into reserved DWs
104 * in ep context
105 */
106 u32 offset;
107 u32 repeat;
108 u32 pkts;
109 u32 cs_count;
110 u32 burst_mode;
111 };
112
113 #define MU3C_U3_PORT_MAX 4
114 #define MU3C_U2_PORT_MAX 5
115
116 /**
117 * struct mu3c_ippc_regs: MTK ssusb ip port control registers
118 * @ip_pw_ctr0~3: ip power and clock control registers
119 * @ip_pw_sts1~2: ip power and clock status registers
120 * @ip_xhci_cap: ip xHCI capability register
121 * @u3_ctrl_p[x]: ip usb3 port x control register, only low 4bytes are used
122 * @u2_ctrl_p[x]: ip usb2 port x control register, only low 4bytes are used
123 * @u2_phy_pll: usb2 phy pll control register
124 */
125 struct mu3c_ippc_regs {
126 __le32 ip_pw_ctr0;
127 __le32 ip_pw_ctr1;
128 __le32 ip_pw_ctr2;
129 __le32 ip_pw_ctr3;
130 __le32 ip_pw_sts1;
131 __le32 ip_pw_sts2;
132 __le32 reserved0[3];
133 __le32 ip_xhci_cap;
134 __le32 reserved1[2];
135 __le64 u3_ctrl_p[MU3C_U3_PORT_MAX];
136 __le64 u2_ctrl_p[MU3C_U2_PORT_MAX];
137 __le32 reserved2;
138 __le32 u2_phy_pll;
139 __le32 reserved3[33]; /* 0x80 ~ 0xff */
140 };
141
142 struct xhci_hcd_mtk {
143 struct device *dev;
144 struct usb_hcd *hcd;
145 struct mu3h_sch_bw_info *sch_array;
146 struct list_head bw_ep_chk_list;
147 DECLARE_HASHTABLE(sch_ep_hash, SCH_EP_HASH_BITS);
148 struct mu3c_ippc_regs __iomem *ippc_regs;
149 int num_u2_ports;
150 int num_u3_ports;
151 int u2p_dis_msk;
152 int u3p_dis_msk;
153 struct clk_bulk_data clks[BULK_CLKS_NUM];
154 struct regulator_bulk_data supplies[BULK_VREGS_NUM];
155 unsigned int has_ippc:1;
156 unsigned int lpm_support:1;
157 unsigned int u2_lpm_disable:1;
158 /* usb remote wakeup */
159 unsigned int uwk_en:1;
160 struct regmap *uwk;
161 u32 uwk_reg_base;
162 u32 uwk_vers;
163 };
164
hcd_to_mtk(struct usb_hcd * hcd)165 static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)
166 {
167 return dev_get_drvdata(hcd->self.controller);
168 }
169
170 int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk);
171 void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk);
172 int xhci_mtk_add_ep(struct usb_hcd *hcd, struct usb_device *udev,
173 struct usb_host_endpoint *ep);
174 int xhci_mtk_drop_ep(struct usb_hcd *hcd, struct usb_device *udev,
175 struct usb_host_endpoint *ep);
176 int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
177 void xhci_mtk_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
178
179 #endif /* _XHCI_MTK_H_ */
180