1 /*
2  * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
3  * flexcop.c - main module part
4  * Copyright (C) 2004-9 Patrick Boettcher <patrick.boettcher@desy.de>
5  * based on skystar2-driver Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
6  *
7  * Acknowledgements:
8  *   John Jurrius from BBTI, Inc. for extensive support
9  *                    with code examples and data books
10  *   Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting)
11  *
12  * Contributions to the skystar2-driver have been done by
13  *   Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes)
14  *   Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code)
15  *   Uwe Bugla, uwe.bugla at gmx.de (doing tests, restyling code, writing docu)
16  *   Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac
17  *               filtering)
18  *
19  * This program is free software; you can redistribute it and/or
20  * modify it under the terms of the GNU Lesser General Public License
21  * as published by the Free Software Foundation; either version 2.1
22  * of the License, or (at your option) any later version.
23  *
24  * This program is distributed in the hope that it will be useful,
25  * but WITHOUT ANY WARRANTY; without even the implied warranty of
26  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
27  * GNU General Public License for more details.
28  *
29  * You should have received a copy of the GNU Lesser General Public License
30  * along with this program; if not, write to the Free Software
31  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
32  */
33 
34 #include "flexcop.h"
35 
36 #define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip"
37 #define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de"
38 
39 #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
40 #define DEBSTATUS ""
41 #else
42 #define DEBSTATUS " (debugging is not enabled)"
43 #endif
44 
45 int b2c2_flexcop_debug;
46 module_param_named(debug, b2c2_flexcop_debug,  int, 0644);
47 MODULE_PARM_DESC(debug,
48 		"set debug level (1=info,2=tuner,4=i2c,8=ts,"
49 		"16=sram,32=reg (|-able))."
50 		DEBSTATUS);
51 #undef DEBSTATUS
52 
53 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
54 
55 /* global zero for ibi values */
56 flexcop_ibi_value ibi_zero;
57 
flexcop_dvb_start_feed(struct dvb_demux_feed * dvbdmxfeed)58 static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
59 {
60 	struct flexcop_device *fc = dvbdmxfeed->demux->priv;
61 	return flexcop_pid_feed_control(fc, dvbdmxfeed, 1);
62 }
63 
flexcop_dvb_stop_feed(struct dvb_demux_feed * dvbdmxfeed)64 static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
65 {
66 	struct flexcop_device *fc = dvbdmxfeed->demux->priv;
67 	return flexcop_pid_feed_control(fc, dvbdmxfeed, 0);
68 }
69 
flexcop_dvb_init(struct flexcop_device * fc)70 static int flexcop_dvb_init(struct flexcop_device *fc)
71 {
72 	int ret = dvb_register_adapter(&fc->dvb_adapter,
73 			"FlexCop Digital TV device", fc->owner,
74 			fc->dev, adapter_nr);
75 	if (ret < 0) {
76 		err("error registering DVB adapter");
77 		return ret;
78 	}
79 	fc->dvb_adapter.priv = fc;
80 
81 	fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING
82 			| DMX_MEMORY_BASED_FILTERING);
83 	fc->demux.priv = fc;
84 	fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED;
85 	fc->demux.start_feed = flexcop_dvb_start_feed;
86 	fc->demux.stop_feed = flexcop_dvb_stop_feed;
87 	fc->demux.write_to_decoder = NULL;
88 
89 	if ((ret = dvb_dmx_init(&fc->demux)) < 0) {
90 		err("dvb_dmx failed: error %d", ret);
91 		goto err_dmx;
92 	}
93 
94 	fc->hw_frontend.source = DMX_FRONTEND_0;
95 
96 	fc->dmxdev.filternum = fc->demux.feednum;
97 	fc->dmxdev.demux = &fc->demux.dmx;
98 	fc->dmxdev.capabilities = 0;
99 	if ((ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter)) < 0) {
100 		err("dvb_dmxdev_init failed: error %d", ret);
101 		goto err_dmx_dev;
102 	}
103 
104 	if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
105 		err("adding hw_frontend to dmx failed: error %d", ret);
106 		goto err_dmx_add_hw_frontend;
107 	}
108 
109 	fc->mem_frontend.source = DMX_MEMORY_FE;
110 	if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend)) < 0) {
111 		err("adding mem_frontend to dmx failed: error %d", ret);
112 		goto err_dmx_add_mem_frontend;
113 	}
114 
115 	if ((ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
116 		err("connect frontend failed: error %d", ret);
117 		goto err_connect_frontend;
118 	}
119 
120 	dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx);
121 
122 	fc->init_state |= FC_STATE_DVB_INIT;
123 	return 0;
124 
125 err_connect_frontend:
126 	fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->mem_frontend);
127 err_dmx_add_mem_frontend:
128 	fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->hw_frontend);
129 err_dmx_add_hw_frontend:
130 	dvb_dmxdev_release(&fc->dmxdev);
131 err_dmx_dev:
132 	dvb_dmx_release(&fc->demux);
133 err_dmx:
134 	dvb_unregister_adapter(&fc->dvb_adapter);
135 	return ret;
136 }
137 
flexcop_dvb_exit(struct flexcop_device * fc)138 static void flexcop_dvb_exit(struct flexcop_device *fc)
139 {
140 	if (fc->init_state & FC_STATE_DVB_INIT) {
141 		dvb_net_release(&fc->dvbnet);
142 
143 		fc->demux.dmx.close(&fc->demux.dmx);
144 		fc->demux.dmx.remove_frontend(&fc->demux.dmx,
145 			&fc->mem_frontend);
146 		fc->demux.dmx.remove_frontend(&fc->demux.dmx,
147 			&fc->hw_frontend);
148 		dvb_dmxdev_release(&fc->dmxdev);
149 		dvb_dmx_release(&fc->demux);
150 		dvb_unregister_adapter(&fc->dvb_adapter);
151 		deb_info("deinitialized dvb stuff\n");
152 	}
153 	fc->init_state &= ~FC_STATE_DVB_INIT;
154 }
155 
156 /* these methods are necessary to achieve the long-term-goal of hiding the
157  * struct flexcop_device from the bus-parts */
flexcop_pass_dmx_data(struct flexcop_device * fc,u8 * buf,u32 len)158 void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len)
159 {
160 	dvb_dmx_swfilter(&fc->demux, buf, len);
161 }
162 EXPORT_SYMBOL(flexcop_pass_dmx_data);
163 
flexcop_pass_dmx_packets(struct flexcop_device * fc,u8 * buf,u32 no)164 void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no)
165 {
166 	dvb_dmx_swfilter_packets(&fc->demux, buf, no);
167 }
168 EXPORT_SYMBOL(flexcop_pass_dmx_packets);
169 
flexcop_reset(struct flexcop_device * fc)170 static void flexcop_reset(struct flexcop_device *fc)
171 {
172 	flexcop_ibi_value v210, v204;
173 
174 	/* reset the flexcop itself */
175 	fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
176 
177 	v210.raw = 0;
178 	v210.sw_reset_210.reset_block_000 = 1;
179 	v210.sw_reset_210.reset_block_100 = 1;
180 	v210.sw_reset_210.reset_block_200 = 1;
181 	v210.sw_reset_210.reset_block_300 = 1;
182 	v210.sw_reset_210.reset_block_400 = 1;
183 	v210.sw_reset_210.reset_block_500 = 1;
184 	v210.sw_reset_210.reset_block_600 = 1;
185 	v210.sw_reset_210.reset_block_700 = 1;
186 	v210.sw_reset_210.Block_reset_enable = 0xb2;
187 	v210.sw_reset_210.Special_controls = 0xc259;
188 	fc->write_ibi_reg(fc,sw_reset_210,v210);
189 	msleep(1);
190 
191 	/* reset the periphical devices */
192 
193 	v204 = fc->read_ibi_reg(fc,misc_204);
194 	v204.misc_204.Per_reset_sig = 0;
195 	fc->write_ibi_reg(fc,misc_204,v204);
196 	msleep(1);
197 	v204.misc_204.Per_reset_sig = 1;
198 	fc->write_ibi_reg(fc,misc_204,v204);
199 }
200 
flexcop_reset_block_300(struct flexcop_device * fc)201 void flexcop_reset_block_300(struct flexcop_device *fc)
202 {
203 	flexcop_ibi_value v208_save = fc->read_ibi_reg(fc, ctrl_208),
204 			  v210 = fc->read_ibi_reg(fc, sw_reset_210);
205 
206 	deb_rdump("208: %08x, 210: %08x\n", v208_save.raw, v210.raw);
207 	fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
208 
209 	v210.sw_reset_210.reset_block_300 = 1;
210 	v210.sw_reset_210.Block_reset_enable = 0xb2;
211 
212 	fc->write_ibi_reg(fc,sw_reset_210,v210);
213 	fc->write_ibi_reg(fc,ctrl_208,v208_save);
214 }
215 
flexcop_device_kmalloc(size_t bus_specific_len)216 struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len)
217 {
218 	void *bus;
219 	struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device),
220 				GFP_KERNEL);
221 	if (!fc) {
222 		err("no memory");
223 		return NULL;
224 	}
225 
226 	bus = kzalloc(bus_specific_len, GFP_KERNEL);
227 	if (!bus) {
228 		err("no memory");
229 		kfree(fc);
230 		return NULL;
231 	}
232 
233 	fc->bus_specific = bus;
234 
235 	return fc;
236 }
237 EXPORT_SYMBOL(flexcop_device_kmalloc);
238 
flexcop_device_kfree(struct flexcop_device * fc)239 void flexcop_device_kfree(struct flexcop_device *fc)
240 {
241 	kfree(fc->bus_specific);
242 	kfree(fc);
243 }
244 EXPORT_SYMBOL(flexcop_device_kfree);
245 
flexcop_device_initialize(struct flexcop_device * fc)246 int flexcop_device_initialize(struct flexcop_device *fc)
247 {
248 	int ret;
249 	ibi_zero.raw = 0;
250 
251 	flexcop_reset(fc);
252 	flexcop_determine_revision(fc);
253 	flexcop_sram_init(fc);
254 	flexcop_hw_filter_init(fc);
255 	flexcop_smc_ctrl(fc, 0);
256 
257 	if ((ret = flexcop_dvb_init(fc)))
258 		goto error;
259 
260 	/* i2c has to be done before doing EEProm stuff -
261 	 * because the EEProm is accessed via i2c */
262 	ret = flexcop_i2c_init(fc);
263 	if (ret)
264 		goto error;
265 
266 	/* do the MAC address reading after initializing the dvb_adapter */
267 	if (fc->get_mac_addr(fc, 0) == 0) {
268 		u8 *b = fc->dvb_adapter.proposed_mac;
269 		info("MAC address = %pM", b);
270 		flexcop_set_mac_filter(fc,b);
271 		flexcop_mac_filter_ctrl(fc,1);
272 	} else
273 		warn("reading of MAC address failed.\n");
274 
275 	if ((ret = flexcop_frontend_init(fc)))
276 		goto error;
277 
278 	flexcop_device_name(fc,"initialization of","complete");
279 	return 0;
280 
281 error:
282 	flexcop_device_exit(fc);
283 	return ret;
284 }
285 EXPORT_SYMBOL(flexcop_device_initialize);
286 
flexcop_device_exit(struct flexcop_device * fc)287 void flexcop_device_exit(struct flexcop_device *fc)
288 {
289 	flexcop_frontend_exit(fc);
290 	flexcop_i2c_exit(fc);
291 	flexcop_dvb_exit(fc);
292 }
293 EXPORT_SYMBOL(flexcop_device_exit);
294 
flexcop_module_init(void)295 static int flexcop_module_init(void)
296 {
297 	info(DRIVER_NAME " loaded successfully");
298 	return 0;
299 }
300 
flexcop_module_cleanup(void)301 static void flexcop_module_cleanup(void)
302 {
303 	info(DRIVER_NAME " unloaded successfully");
304 }
305 
306 module_init(flexcop_module_init);
307 module_exit(flexcop_module_cleanup);
308 
309 MODULE_AUTHOR(DRIVER_AUTHOR);
310 MODULE_DESCRIPTION(DRIVER_NAME);
311 MODULE_LICENSE("GPL");
312