1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /* exynos_drm_fimd.c
3 *
4 * Copyright (C) 2011 Samsung Electronics Co.Ltd
5 * Authors:
6 * Joonyoung Shim <jy0922.shim@samsung.com>
7 * Inki Dae <inki.dae@samsung.com>
8 */
9
10 #include <linux/clk.h>
11 #include <linux/component.h>
12 #include <linux/kernel.h>
13 #include <linux/mfd/syscon.h>
14 #include <linux/of.h>
15 #include <linux/of_device.h>
16 #include <linux/platform_device.h>
17 #include <linux/pm_runtime.h>
18 #include <linux/regmap.h>
19
20 #include <video/of_display_timing.h>
21 #include <video/of_videomode.h>
22 #include <video/samsung_fimd.h>
23
24 #include <drm/drm_blend.h>
25 #include <drm/drm_fourcc.h>
26 #include <drm/drm_framebuffer.h>
27 #include <drm/drm_vblank.h>
28 #include <drm/exynos_drm.h>
29
30 #include "exynos_drm_crtc.h"
31 #include "exynos_drm_drv.h"
32 #include "exynos_drm_fb.h"
33 #include "exynos_drm_plane.h"
34
35 /*
36 * FIMD stands for Fully Interactive Mobile Display and
37 * as a display controller, it transfers contents drawn on memory
38 * to a LCD Panel through Display Interfaces such as RGB or
39 * CPU Interface.
40 */
41
42 #define MIN_FB_WIDTH_FOR_16WORD_BURST 128
43
44 /* position control register for hardware window 0, 2 ~ 4.*/
45 #define VIDOSD_A(win) (VIDOSD_BASE + 0x00 + (win) * 16)
46 #define VIDOSD_B(win) (VIDOSD_BASE + 0x04 + (win) * 16)
47 /*
48 * size control register for hardware windows 0 and alpha control register
49 * for hardware windows 1 ~ 4
50 */
51 #define VIDOSD_C(win) (VIDOSD_BASE + 0x08 + (win) * 16)
52 /* size control register for hardware windows 1 ~ 2. */
53 #define VIDOSD_D(win) (VIDOSD_BASE + 0x0C + (win) * 16)
54
55 #define VIDWnALPHA0(win) (VIDW_ALPHA + 0x00 + (win) * 8)
56 #define VIDWnALPHA1(win) (VIDW_ALPHA + 0x04 + (win) * 8)
57
58 #define VIDWx_BUF_START(win, buf) (VIDW_BUF_START(buf) + (win) * 8)
59 #define VIDWx_BUF_START_S(win, buf) (VIDW_BUF_START_S(buf) + (win) * 8)
60 #define VIDWx_BUF_END(win, buf) (VIDW_BUF_END(buf) + (win) * 8)
61 #define VIDWx_BUF_SIZE(win, buf) (VIDW_BUF_SIZE(buf) + (win) * 4)
62
63 /* color key control register for hardware window 1 ~ 4. */
64 #define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + ((x - 1) * 8))
65 /* color key value register for hardware window 1 ~ 4. */
66 #define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + ((x - 1) * 8))
67
68 /* I80 trigger control register */
69 #define TRIGCON 0x1A4
70 #define TRGMODE_ENABLE (1 << 0)
71 #define SWTRGCMD_ENABLE (1 << 1)
72 /* Exynos3250, 3472, 5260 5410, 5420 and 5422 only supported. */
73 #define HWTRGEN_ENABLE (1 << 3)
74 #define HWTRGMASK_ENABLE (1 << 4)
75 /* Exynos3250, 3472, 5260, 5420 and 5422 only supported. */
76 #define HWTRIGEN_PER_ENABLE (1 << 31)
77
78 /* display mode change control register except exynos4 */
79 #define VIDOUT_CON 0x000
80 #define VIDOUT_CON_F_I80_LDI0 (0x2 << 8)
81
82 /* I80 interface control for main LDI register */
83 #define I80IFCONFAx(x) (0x1B0 + (x) * 4)
84 #define I80IFCONFBx(x) (0x1B8 + (x) * 4)
85 #define LCD_CS_SETUP(x) ((x) << 16)
86 #define LCD_WR_SETUP(x) ((x) << 12)
87 #define LCD_WR_ACTIVE(x) ((x) << 8)
88 #define LCD_WR_HOLD(x) ((x) << 4)
89 #define I80IFEN_ENABLE (1 << 0)
90
91 /* FIMD has totally five hardware windows. */
92 #define WINDOWS_NR 5
93
94 /* HW trigger flag on i80 panel. */
95 #define I80_HW_TRG (1 << 1)
96
97 struct fimd_driver_data {
98 unsigned int timing_base;
99 unsigned int lcdblk_offset;
100 unsigned int lcdblk_vt_shift;
101 unsigned int lcdblk_bypass_shift;
102 unsigned int lcdblk_mic_bypass_shift;
103 unsigned int trg_type;
104
105 unsigned int has_shadowcon:1;
106 unsigned int has_clksel:1;
107 unsigned int has_limited_fmt:1;
108 unsigned int has_vidoutcon:1;
109 unsigned int has_vtsel:1;
110 unsigned int has_mic_bypass:1;
111 unsigned int has_dp_clk:1;
112 unsigned int has_hw_trigger:1;
113 unsigned int has_trigger_per_te:1;
114 unsigned int has_bgr_support:1;
115 };
116
117 static struct fimd_driver_data s3c64xx_fimd_driver_data = {
118 .timing_base = 0x0,
119 .has_clksel = 1,
120 .has_limited_fmt = 1,
121 };
122
123 static struct fimd_driver_data s5pv210_fimd_driver_data = {
124 .timing_base = 0x0,
125 .has_shadowcon = 1,
126 .has_clksel = 1,
127 };
128
129 static struct fimd_driver_data exynos3_fimd_driver_data = {
130 .timing_base = 0x20000,
131 .lcdblk_offset = 0x210,
132 .lcdblk_bypass_shift = 1,
133 .has_shadowcon = 1,
134 .has_vidoutcon = 1,
135 };
136
137 static struct fimd_driver_data exynos4_fimd_driver_data = {
138 .timing_base = 0x0,
139 .lcdblk_offset = 0x210,
140 .lcdblk_vt_shift = 10,
141 .lcdblk_bypass_shift = 1,
142 .has_shadowcon = 1,
143 .has_vtsel = 1,
144 .has_bgr_support = 1,
145 };
146
147 static struct fimd_driver_data exynos5_fimd_driver_data = {
148 .timing_base = 0x20000,
149 .lcdblk_offset = 0x214,
150 .lcdblk_vt_shift = 24,
151 .lcdblk_bypass_shift = 15,
152 .has_shadowcon = 1,
153 .has_vidoutcon = 1,
154 .has_vtsel = 1,
155 .has_dp_clk = 1,
156 .has_bgr_support = 1,
157 };
158
159 static struct fimd_driver_data exynos5420_fimd_driver_data = {
160 .timing_base = 0x20000,
161 .lcdblk_offset = 0x214,
162 .lcdblk_vt_shift = 24,
163 .lcdblk_bypass_shift = 15,
164 .lcdblk_mic_bypass_shift = 11,
165 .has_shadowcon = 1,
166 .has_vidoutcon = 1,
167 .has_vtsel = 1,
168 .has_mic_bypass = 1,
169 .has_dp_clk = 1,
170 .has_bgr_support = 1,
171 };
172
173 struct fimd_context {
174 struct device *dev;
175 struct drm_device *drm_dev;
176 void *dma_priv;
177 struct exynos_drm_crtc *crtc;
178 struct exynos_drm_plane planes[WINDOWS_NR];
179 struct exynos_drm_plane_config configs[WINDOWS_NR];
180 struct clk *bus_clk;
181 struct clk *lcd_clk;
182 void __iomem *regs;
183 struct regmap *sysreg;
184 unsigned long irq_flags;
185 u32 vidcon0;
186 u32 vidcon1;
187 u32 vidout_con;
188 u32 i80ifcon;
189 bool i80_if;
190 bool suspended;
191 wait_queue_head_t wait_vsync_queue;
192 atomic_t wait_vsync_event;
193 atomic_t win_updated;
194 atomic_t triggering;
195 u32 clkdiv;
196
197 const struct fimd_driver_data *driver_data;
198 struct drm_encoder *encoder;
199 struct exynos_drm_clk dp_clk;
200 };
201
202 static const struct of_device_id fimd_driver_dt_match[] = {
203 { .compatible = "samsung,s3c6400-fimd",
204 .data = &s3c64xx_fimd_driver_data },
205 { .compatible = "samsung,s5pv210-fimd",
206 .data = &s5pv210_fimd_driver_data },
207 { .compatible = "samsung,exynos3250-fimd",
208 .data = &exynos3_fimd_driver_data },
209 { .compatible = "samsung,exynos4210-fimd",
210 .data = &exynos4_fimd_driver_data },
211 { .compatible = "samsung,exynos5250-fimd",
212 .data = &exynos5_fimd_driver_data },
213 { .compatible = "samsung,exynos5420-fimd",
214 .data = &exynos5420_fimd_driver_data },
215 {},
216 };
217 MODULE_DEVICE_TABLE(of, fimd_driver_dt_match);
218
219 static const enum drm_plane_type fimd_win_types[WINDOWS_NR] = {
220 DRM_PLANE_TYPE_PRIMARY,
221 DRM_PLANE_TYPE_OVERLAY,
222 DRM_PLANE_TYPE_OVERLAY,
223 DRM_PLANE_TYPE_OVERLAY,
224 DRM_PLANE_TYPE_CURSOR,
225 };
226
227 static const uint32_t fimd_formats[] = {
228 DRM_FORMAT_C8,
229 DRM_FORMAT_XRGB1555,
230 DRM_FORMAT_RGB565,
231 DRM_FORMAT_XRGB8888,
232 DRM_FORMAT_ARGB8888,
233 };
234
235 static const uint32_t fimd_extended_formats[] = {
236 DRM_FORMAT_C8,
237 DRM_FORMAT_XRGB1555,
238 DRM_FORMAT_XBGR1555,
239 DRM_FORMAT_RGB565,
240 DRM_FORMAT_BGR565,
241 DRM_FORMAT_XRGB8888,
242 DRM_FORMAT_XBGR8888,
243 DRM_FORMAT_ARGB8888,
244 DRM_FORMAT_ABGR8888,
245 };
246
247 static const unsigned int capabilities[WINDOWS_NR] = {
248 0,
249 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
250 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
251 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
252 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
253 };
254
fimd_set_bits(struct fimd_context * ctx,u32 reg,u32 mask,u32 val)255 static inline void fimd_set_bits(struct fimd_context *ctx, u32 reg, u32 mask,
256 u32 val)
257 {
258 val = (val & mask) | (readl(ctx->regs + reg) & ~mask);
259 writel(val, ctx->regs + reg);
260 }
261
fimd_enable_vblank(struct exynos_drm_crtc * crtc)262 static int fimd_enable_vblank(struct exynos_drm_crtc *crtc)
263 {
264 struct fimd_context *ctx = crtc->ctx;
265 u32 val;
266
267 if (ctx->suspended)
268 return -EPERM;
269
270 if (!test_and_set_bit(0, &ctx->irq_flags)) {
271 val = readl(ctx->regs + VIDINTCON0);
272
273 val |= VIDINTCON0_INT_ENABLE;
274
275 if (ctx->i80_if) {
276 val |= VIDINTCON0_INT_I80IFDONE;
277 val |= VIDINTCON0_INT_SYSMAINCON;
278 val &= ~VIDINTCON0_INT_SYSSUBCON;
279 } else {
280 val |= VIDINTCON0_INT_FRAME;
281
282 val &= ~VIDINTCON0_FRAMESEL0_MASK;
283 val |= VIDINTCON0_FRAMESEL0_FRONTPORCH;
284 val &= ~VIDINTCON0_FRAMESEL1_MASK;
285 val |= VIDINTCON0_FRAMESEL1_NONE;
286 }
287
288 writel(val, ctx->regs + VIDINTCON0);
289 }
290
291 return 0;
292 }
293
fimd_disable_vblank(struct exynos_drm_crtc * crtc)294 static void fimd_disable_vblank(struct exynos_drm_crtc *crtc)
295 {
296 struct fimd_context *ctx = crtc->ctx;
297 u32 val;
298
299 if (ctx->suspended)
300 return;
301
302 if (test_and_clear_bit(0, &ctx->irq_flags)) {
303 val = readl(ctx->regs + VIDINTCON0);
304
305 val &= ~VIDINTCON0_INT_ENABLE;
306
307 if (ctx->i80_if) {
308 val &= ~VIDINTCON0_INT_I80IFDONE;
309 val &= ~VIDINTCON0_INT_SYSMAINCON;
310 val &= ~VIDINTCON0_INT_SYSSUBCON;
311 } else
312 val &= ~VIDINTCON0_INT_FRAME;
313
314 writel(val, ctx->regs + VIDINTCON0);
315 }
316 }
317
fimd_wait_for_vblank(struct exynos_drm_crtc * crtc)318 static void fimd_wait_for_vblank(struct exynos_drm_crtc *crtc)
319 {
320 struct fimd_context *ctx = crtc->ctx;
321
322 if (ctx->suspended)
323 return;
324
325 atomic_set(&ctx->wait_vsync_event, 1);
326
327 /*
328 * wait for FIMD to signal VSYNC interrupt or return after
329 * timeout which is set to 50ms (refresh rate of 20).
330 */
331 if (!wait_event_timeout(ctx->wait_vsync_queue,
332 !atomic_read(&ctx->wait_vsync_event),
333 HZ/20))
334 DRM_DEV_DEBUG_KMS(ctx->dev, "vblank wait timed out.\n");
335 }
336
fimd_enable_video_output(struct fimd_context * ctx,unsigned int win,bool enable)337 static void fimd_enable_video_output(struct fimd_context *ctx, unsigned int win,
338 bool enable)
339 {
340 u32 val = readl(ctx->regs + WINCON(win));
341
342 if (enable)
343 val |= WINCONx_ENWIN;
344 else
345 val &= ~WINCONx_ENWIN;
346
347 writel(val, ctx->regs + WINCON(win));
348 }
349
fimd_enable_shadow_channel_path(struct fimd_context * ctx,unsigned int win,bool enable)350 static void fimd_enable_shadow_channel_path(struct fimd_context *ctx,
351 unsigned int win,
352 bool enable)
353 {
354 u32 val = readl(ctx->regs + SHADOWCON);
355
356 if (enable)
357 val |= SHADOWCON_CHx_ENABLE(win);
358 else
359 val &= ~SHADOWCON_CHx_ENABLE(win);
360
361 writel(val, ctx->regs + SHADOWCON);
362 }
363
fimd_clear_channels(struct exynos_drm_crtc * crtc)364 static int fimd_clear_channels(struct exynos_drm_crtc *crtc)
365 {
366 struct fimd_context *ctx = crtc->ctx;
367 unsigned int win, ch_enabled = 0;
368 int ret;
369
370 /* Hardware is in unknown state, so ensure it gets enabled properly */
371 ret = pm_runtime_resume_and_get(ctx->dev);
372 if (ret < 0) {
373 dev_err(ctx->dev, "failed to enable FIMD device.\n");
374 return ret;
375 }
376
377 clk_prepare_enable(ctx->bus_clk);
378 clk_prepare_enable(ctx->lcd_clk);
379
380 /* Check if any channel is enabled. */
381 for (win = 0; win < WINDOWS_NR; win++) {
382 u32 val = readl(ctx->regs + WINCON(win));
383
384 if (val & WINCONx_ENWIN) {
385 fimd_enable_video_output(ctx, win, false);
386
387 if (ctx->driver_data->has_shadowcon)
388 fimd_enable_shadow_channel_path(ctx, win,
389 false);
390
391 ch_enabled = 1;
392 }
393 }
394
395 /* Wait for vsync, as disable channel takes effect at next vsync */
396 if (ch_enabled) {
397 ctx->suspended = false;
398
399 fimd_enable_vblank(ctx->crtc);
400 fimd_wait_for_vblank(ctx->crtc);
401 fimd_disable_vblank(ctx->crtc);
402
403 ctx->suspended = true;
404 }
405
406 clk_disable_unprepare(ctx->lcd_clk);
407 clk_disable_unprepare(ctx->bus_clk);
408
409 pm_runtime_put(ctx->dev);
410
411 return 0;
412 }
413
414
fimd_atomic_check(struct exynos_drm_crtc * crtc,struct drm_crtc_state * state)415 static int fimd_atomic_check(struct exynos_drm_crtc *crtc,
416 struct drm_crtc_state *state)
417 {
418 struct drm_display_mode *mode = &state->adjusted_mode;
419 struct fimd_context *ctx = crtc->ctx;
420 unsigned long ideal_clk, lcd_rate;
421 u32 clkdiv;
422
423 if (mode->clock == 0) {
424 DRM_DEV_ERROR(ctx->dev, "Mode has zero clock value.\n");
425 return -EINVAL;
426 }
427
428 ideal_clk = mode->clock * 1000;
429
430 if (ctx->i80_if) {
431 /*
432 * The frame done interrupt should be occurred prior to the
433 * next TE signal.
434 */
435 ideal_clk *= 2;
436 }
437
438 lcd_rate = clk_get_rate(ctx->lcd_clk);
439 if (2 * lcd_rate < ideal_clk) {
440 DRM_DEV_ERROR(ctx->dev,
441 "sclk_fimd clock too low(%lu) for requested pixel clock(%lu)\n",
442 lcd_rate, ideal_clk);
443 return -EINVAL;
444 }
445
446 /* Find the clock divider value that gets us closest to ideal_clk */
447 clkdiv = DIV_ROUND_CLOSEST(lcd_rate, ideal_clk);
448 if (clkdiv >= 0x200) {
449 DRM_DEV_ERROR(ctx->dev, "requested pixel clock(%lu) too low\n",
450 ideal_clk);
451 return -EINVAL;
452 }
453
454 ctx->clkdiv = (clkdiv < 0x100) ? clkdiv : 0xff;
455
456 return 0;
457 }
458
fimd_setup_trigger(struct fimd_context * ctx)459 static void fimd_setup_trigger(struct fimd_context *ctx)
460 {
461 void __iomem *timing_base = ctx->regs + ctx->driver_data->timing_base;
462 u32 trg_type = ctx->driver_data->trg_type;
463 u32 val = readl(timing_base + TRIGCON);
464
465 val &= ~(TRGMODE_ENABLE);
466
467 if (trg_type == I80_HW_TRG) {
468 if (ctx->driver_data->has_hw_trigger)
469 val |= HWTRGEN_ENABLE | HWTRGMASK_ENABLE;
470 if (ctx->driver_data->has_trigger_per_te)
471 val |= HWTRIGEN_PER_ENABLE;
472 } else {
473 val |= TRGMODE_ENABLE;
474 }
475
476 writel(val, timing_base + TRIGCON);
477 }
478
fimd_commit(struct exynos_drm_crtc * crtc)479 static void fimd_commit(struct exynos_drm_crtc *crtc)
480 {
481 struct fimd_context *ctx = crtc->ctx;
482 struct drm_display_mode *mode = &crtc->base.state->adjusted_mode;
483 const struct fimd_driver_data *driver_data = ctx->driver_data;
484 void *timing_base = ctx->regs + driver_data->timing_base;
485 u32 val;
486
487 if (ctx->suspended)
488 return;
489
490 /* nothing to do if we haven't set the mode yet */
491 if (mode->htotal == 0 || mode->vtotal == 0)
492 return;
493
494 if (ctx->i80_if) {
495 val = ctx->i80ifcon | I80IFEN_ENABLE;
496 writel(val, timing_base + I80IFCONFAx(0));
497
498 /* disable auto frame rate */
499 writel(0, timing_base + I80IFCONFBx(0));
500
501 /* set video type selection to I80 interface */
502 if (driver_data->has_vtsel && ctx->sysreg &&
503 regmap_update_bits(ctx->sysreg,
504 driver_data->lcdblk_offset,
505 0x3 << driver_data->lcdblk_vt_shift,
506 0x1 << driver_data->lcdblk_vt_shift)) {
507 DRM_DEV_ERROR(ctx->dev,
508 "Failed to update sysreg for I80 i/f.\n");
509 return;
510 }
511 } else {
512 int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd;
513 u32 vidcon1;
514
515 /* setup polarity values */
516 vidcon1 = ctx->vidcon1;
517 if (mode->flags & DRM_MODE_FLAG_NVSYNC)
518 vidcon1 |= VIDCON1_INV_VSYNC;
519 if (mode->flags & DRM_MODE_FLAG_NHSYNC)
520 vidcon1 |= VIDCON1_INV_HSYNC;
521 writel(vidcon1, ctx->regs + driver_data->timing_base + VIDCON1);
522
523 /* setup vertical timing values. */
524 vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
525 vbpd = mode->crtc_vtotal - mode->crtc_vsync_end;
526 vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay;
527
528 val = VIDTCON0_VBPD(vbpd - 1) |
529 VIDTCON0_VFPD(vfpd - 1) |
530 VIDTCON0_VSPW(vsync_len - 1);
531 writel(val, ctx->regs + driver_data->timing_base + VIDTCON0);
532
533 /* setup horizontal timing values. */
534 hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
535 hbpd = mode->crtc_htotal - mode->crtc_hsync_end;
536 hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay;
537
538 val = VIDTCON1_HBPD(hbpd - 1) |
539 VIDTCON1_HFPD(hfpd - 1) |
540 VIDTCON1_HSPW(hsync_len - 1);
541 writel(val, ctx->regs + driver_data->timing_base + VIDTCON1);
542 }
543
544 if (driver_data->has_vidoutcon)
545 writel(ctx->vidout_con, timing_base + VIDOUT_CON);
546
547 /* set bypass selection */
548 if (ctx->sysreg && regmap_update_bits(ctx->sysreg,
549 driver_data->lcdblk_offset,
550 0x1 << driver_data->lcdblk_bypass_shift,
551 0x1 << driver_data->lcdblk_bypass_shift)) {
552 DRM_DEV_ERROR(ctx->dev,
553 "Failed to update sysreg for bypass setting.\n");
554 return;
555 }
556
557 /* TODO: When MIC is enabled for display path, the lcdblk_mic_bypass
558 * bit should be cleared.
559 */
560 if (driver_data->has_mic_bypass && ctx->sysreg &&
561 regmap_update_bits(ctx->sysreg,
562 driver_data->lcdblk_offset,
563 0x1 << driver_data->lcdblk_mic_bypass_shift,
564 0x1 << driver_data->lcdblk_mic_bypass_shift)) {
565 DRM_DEV_ERROR(ctx->dev,
566 "Failed to update sysreg for bypass mic.\n");
567 return;
568 }
569
570 /* setup horizontal and vertical display size. */
571 val = VIDTCON2_LINEVAL(mode->vdisplay - 1) |
572 VIDTCON2_HOZVAL(mode->hdisplay - 1) |
573 VIDTCON2_LINEVAL_E(mode->vdisplay - 1) |
574 VIDTCON2_HOZVAL_E(mode->hdisplay - 1);
575 writel(val, ctx->regs + driver_data->timing_base + VIDTCON2);
576
577 fimd_setup_trigger(ctx);
578
579 /*
580 * fields of register with prefix '_F' would be updated
581 * at vsync(same as dma start)
582 */
583 val = ctx->vidcon0;
584 val |= VIDCON0_ENVID | VIDCON0_ENVID_F;
585
586 if (ctx->driver_data->has_clksel)
587 val |= VIDCON0_CLKSEL_LCD;
588
589 if (ctx->clkdiv > 1)
590 val |= VIDCON0_CLKVAL_F(ctx->clkdiv - 1) | VIDCON0_CLKDIR;
591
592 writel(val, ctx->regs + VIDCON0);
593 }
594
fimd_win_set_bldeq(struct fimd_context * ctx,unsigned int win,unsigned int alpha,unsigned int pixel_alpha)595 static void fimd_win_set_bldeq(struct fimd_context *ctx, unsigned int win,
596 unsigned int alpha, unsigned int pixel_alpha)
597 {
598 u32 mask = BLENDEQ_A_FUNC_F(0xf) | BLENDEQ_B_FUNC_F(0xf);
599 u32 val = 0;
600
601 switch (pixel_alpha) {
602 case DRM_MODE_BLEND_PIXEL_NONE:
603 case DRM_MODE_BLEND_COVERAGE:
604 val |= BLENDEQ_A_FUNC_F(BLENDEQ_ALPHA_A);
605 val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A);
606 break;
607 case DRM_MODE_BLEND_PREMULTI:
608 default:
609 if (alpha != DRM_BLEND_ALPHA_OPAQUE) {
610 val |= BLENDEQ_A_FUNC_F(BLENDEQ_ALPHA0);
611 val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A);
612 } else {
613 val |= BLENDEQ_A_FUNC_F(BLENDEQ_ONE);
614 val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A);
615 }
616 break;
617 }
618 fimd_set_bits(ctx, BLENDEQx(win), mask, val);
619 }
620
fimd_win_set_bldmod(struct fimd_context * ctx,unsigned int win,unsigned int alpha,unsigned int pixel_alpha)621 static void fimd_win_set_bldmod(struct fimd_context *ctx, unsigned int win,
622 unsigned int alpha, unsigned int pixel_alpha)
623 {
624 u32 win_alpha_l = (alpha >> 8) & 0xf;
625 u32 win_alpha_h = alpha >> 12;
626 u32 val = 0;
627
628 switch (pixel_alpha) {
629 case DRM_MODE_BLEND_PIXEL_NONE:
630 break;
631 case DRM_MODE_BLEND_COVERAGE:
632 case DRM_MODE_BLEND_PREMULTI:
633 default:
634 val |= WINCON1_ALPHA_SEL;
635 val |= WINCON1_BLD_PIX;
636 val |= WINCON1_ALPHA_MUL;
637 break;
638 }
639 fimd_set_bits(ctx, WINCON(win), WINCONx_BLEND_MODE_MASK, val);
640
641 /* OSD alpha */
642 val = VIDISD14C_ALPHA0_R(win_alpha_h) |
643 VIDISD14C_ALPHA0_G(win_alpha_h) |
644 VIDISD14C_ALPHA0_B(win_alpha_h) |
645 VIDISD14C_ALPHA1_R(0x0) |
646 VIDISD14C_ALPHA1_G(0x0) |
647 VIDISD14C_ALPHA1_B(0x0);
648 writel(val, ctx->regs + VIDOSD_C(win));
649
650 val = VIDW_ALPHA_R(win_alpha_l) | VIDW_ALPHA_G(win_alpha_l) |
651 VIDW_ALPHA_B(win_alpha_l);
652 writel(val, ctx->regs + VIDWnALPHA0(win));
653
654 val = VIDW_ALPHA_R(0x0) | VIDW_ALPHA_G(0x0) |
655 VIDW_ALPHA_B(0x0);
656 writel(val, ctx->regs + VIDWnALPHA1(win));
657
658 fimd_set_bits(ctx, BLENDCON, BLENDCON_NEW_MASK,
659 BLENDCON_NEW_8BIT_ALPHA_VALUE);
660 }
661
fimd_win_set_pixfmt(struct fimd_context * ctx,unsigned int win,struct drm_framebuffer * fb,int width)662 static void fimd_win_set_pixfmt(struct fimd_context *ctx, unsigned int win,
663 struct drm_framebuffer *fb, int width)
664 {
665 struct exynos_drm_plane plane = ctx->planes[win];
666 struct exynos_drm_plane_state *state =
667 to_exynos_plane_state(plane.base.state);
668 uint32_t pixel_format = fb->format->format;
669 unsigned int alpha = state->base.alpha;
670 u32 val = WINCONx_ENWIN;
671 unsigned int pixel_alpha;
672
673 if (fb->format->has_alpha)
674 pixel_alpha = state->base.pixel_blend_mode;
675 else
676 pixel_alpha = DRM_MODE_BLEND_PIXEL_NONE;
677
678 /*
679 * In case of s3c64xx, window 0 doesn't support alpha channel.
680 * So the request format is ARGB8888 then change it to XRGB8888.
681 */
682 if (ctx->driver_data->has_limited_fmt && !win) {
683 if (pixel_format == DRM_FORMAT_ARGB8888)
684 pixel_format = DRM_FORMAT_XRGB8888;
685 }
686
687 switch (pixel_format) {
688 case DRM_FORMAT_C8:
689 val |= WINCON0_BPPMODE_8BPP_PALETTE;
690 val |= WINCONx_BURSTLEN_8WORD;
691 val |= WINCONx_BYTSWP;
692 break;
693 case DRM_FORMAT_XRGB1555:
694 case DRM_FORMAT_XBGR1555:
695 val |= WINCON0_BPPMODE_16BPP_1555;
696 val |= WINCONx_HAWSWP;
697 val |= WINCONx_BURSTLEN_16WORD;
698 break;
699 case DRM_FORMAT_RGB565:
700 case DRM_FORMAT_BGR565:
701 val |= WINCON0_BPPMODE_16BPP_565;
702 val |= WINCONx_HAWSWP;
703 val |= WINCONx_BURSTLEN_16WORD;
704 break;
705 case DRM_FORMAT_XRGB8888:
706 case DRM_FORMAT_XBGR8888:
707 val |= WINCON0_BPPMODE_24BPP_888;
708 val |= WINCONx_WSWP;
709 val |= WINCONx_BURSTLEN_16WORD;
710 break;
711 case DRM_FORMAT_ARGB8888:
712 case DRM_FORMAT_ABGR8888:
713 default:
714 val |= WINCON1_BPPMODE_25BPP_A1888;
715 val |= WINCONx_WSWP;
716 val |= WINCONx_BURSTLEN_16WORD;
717 break;
718 }
719
720 switch (pixel_format) {
721 case DRM_FORMAT_XBGR1555:
722 case DRM_FORMAT_XBGR8888:
723 case DRM_FORMAT_ABGR8888:
724 case DRM_FORMAT_BGR565:
725 writel(WIN_RGB_ORDER_REVERSE, ctx->regs + WIN_RGB_ORDER(win));
726 break;
727 default:
728 writel(WIN_RGB_ORDER_FORWARD, ctx->regs + WIN_RGB_ORDER(win));
729 break;
730 }
731
732 /*
733 * Setting dma-burst to 16Word causes permanent tearing for very small
734 * buffers, e.g. cursor buffer. Burst Mode switching which based on
735 * plane size is not recommended as plane size varies alot towards the
736 * end of the screen and rapid movement causes unstable DMA, but it is
737 * still better to change dma-burst than displaying garbage.
738 */
739
740 if (width < MIN_FB_WIDTH_FOR_16WORD_BURST) {
741 val &= ~WINCONx_BURSTLEN_MASK;
742 val |= WINCONx_BURSTLEN_4WORD;
743 }
744 fimd_set_bits(ctx, WINCON(win), ~WINCONx_BLEND_MODE_MASK, val);
745
746 /* hardware window 0 doesn't support alpha channel. */
747 if (win != 0) {
748 fimd_win_set_bldmod(ctx, win, alpha, pixel_alpha);
749 fimd_win_set_bldeq(ctx, win, alpha, pixel_alpha);
750 }
751 }
752
fimd_win_set_colkey(struct fimd_context * ctx,unsigned int win)753 static void fimd_win_set_colkey(struct fimd_context *ctx, unsigned int win)
754 {
755 unsigned int keycon0 = 0, keycon1 = 0;
756
757 keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F |
758 WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
759
760 keycon1 = WxKEYCON1_COLVAL(0xffffffff);
761
762 writel(keycon0, ctx->regs + WKEYCON0_BASE(win));
763 writel(keycon1, ctx->regs + WKEYCON1_BASE(win));
764 }
765
766 /**
767 * fimd_shadow_protect_win() - disable updating values from shadow registers at vsync
768 *
769 * @ctx: local driver data
770 * @win: window to protect registers for
771 * @protect: 1 to protect (disable updates)
772 */
fimd_shadow_protect_win(struct fimd_context * ctx,unsigned int win,bool protect)773 static void fimd_shadow_protect_win(struct fimd_context *ctx,
774 unsigned int win, bool protect)
775 {
776 u32 reg, bits, val;
777
778 /*
779 * SHADOWCON/PRTCON register is used for enabling timing.
780 *
781 * for example, once only width value of a register is set,
782 * if the dma is started then fimd hardware could malfunction so
783 * with protect window setting, the register fields with prefix '_F'
784 * wouldn't be updated at vsync also but updated once unprotect window
785 * is set.
786 */
787
788 if (ctx->driver_data->has_shadowcon) {
789 reg = SHADOWCON;
790 bits = SHADOWCON_WINx_PROTECT(win);
791 } else {
792 reg = PRTCON;
793 bits = PRTCON_PROTECT;
794 }
795
796 val = readl(ctx->regs + reg);
797 if (protect)
798 val |= bits;
799 else
800 val &= ~bits;
801 writel(val, ctx->regs + reg);
802 }
803
fimd_atomic_begin(struct exynos_drm_crtc * crtc)804 static void fimd_atomic_begin(struct exynos_drm_crtc *crtc)
805 {
806 struct fimd_context *ctx = crtc->ctx;
807 int i;
808
809 if (ctx->suspended)
810 return;
811
812 for (i = 0; i < WINDOWS_NR; i++)
813 fimd_shadow_protect_win(ctx, i, true);
814 }
815
fimd_atomic_flush(struct exynos_drm_crtc * crtc)816 static void fimd_atomic_flush(struct exynos_drm_crtc *crtc)
817 {
818 struct fimd_context *ctx = crtc->ctx;
819 int i;
820
821 if (ctx->suspended)
822 return;
823
824 for (i = 0; i < WINDOWS_NR; i++)
825 fimd_shadow_protect_win(ctx, i, false);
826
827 exynos_crtc_handle_event(crtc);
828 }
829
fimd_update_plane(struct exynos_drm_crtc * crtc,struct exynos_drm_plane * plane)830 static void fimd_update_plane(struct exynos_drm_crtc *crtc,
831 struct exynos_drm_plane *plane)
832 {
833 struct exynos_drm_plane_state *state =
834 to_exynos_plane_state(plane->base.state);
835 struct fimd_context *ctx = crtc->ctx;
836 struct drm_framebuffer *fb = state->base.fb;
837 dma_addr_t dma_addr;
838 unsigned long val, size, offset;
839 unsigned int last_x, last_y, buf_offsize, line_size;
840 unsigned int win = plane->index;
841 unsigned int cpp = fb->format->cpp[0];
842 unsigned int pitch = fb->pitches[0];
843
844 if (ctx->suspended)
845 return;
846
847 offset = state->src.x * cpp;
848 offset += state->src.y * pitch;
849
850 /* buffer start address */
851 dma_addr = exynos_drm_fb_dma_addr(fb, 0) + offset;
852 val = (unsigned long)dma_addr;
853 writel(val, ctx->regs + VIDWx_BUF_START(win, 0));
854
855 /* buffer end address */
856 size = pitch * state->crtc.h;
857 val = (unsigned long)(dma_addr + size);
858 writel(val, ctx->regs + VIDWx_BUF_END(win, 0));
859
860 DRM_DEV_DEBUG_KMS(ctx->dev,
861 "start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n",
862 (unsigned long)dma_addr, val, size);
863 DRM_DEV_DEBUG_KMS(ctx->dev, "ovl_width = %d, ovl_height = %d\n",
864 state->crtc.w, state->crtc.h);
865
866 /* buffer size */
867 buf_offsize = pitch - (state->crtc.w * cpp);
868 line_size = state->crtc.w * cpp;
869 val = VIDW_BUF_SIZE_OFFSET(buf_offsize) |
870 VIDW_BUF_SIZE_PAGEWIDTH(line_size) |
871 VIDW_BUF_SIZE_OFFSET_E(buf_offsize) |
872 VIDW_BUF_SIZE_PAGEWIDTH_E(line_size);
873 writel(val, ctx->regs + VIDWx_BUF_SIZE(win, 0));
874
875 /* OSD position */
876 val = VIDOSDxA_TOPLEFT_X(state->crtc.x) |
877 VIDOSDxA_TOPLEFT_Y(state->crtc.y) |
878 VIDOSDxA_TOPLEFT_X_E(state->crtc.x) |
879 VIDOSDxA_TOPLEFT_Y_E(state->crtc.y);
880 writel(val, ctx->regs + VIDOSD_A(win));
881
882 last_x = state->crtc.x + state->crtc.w;
883 if (last_x)
884 last_x--;
885 last_y = state->crtc.y + state->crtc.h;
886 if (last_y)
887 last_y--;
888
889 val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y) |
890 VIDOSDxB_BOTRIGHT_X_E(last_x) | VIDOSDxB_BOTRIGHT_Y_E(last_y);
891
892 writel(val, ctx->regs + VIDOSD_B(win));
893
894 DRM_DEV_DEBUG_KMS(ctx->dev,
895 "osd pos: tx = %d, ty = %d, bx = %d, by = %d\n",
896 state->crtc.x, state->crtc.y, last_x, last_y);
897
898 /* OSD size */
899 if (win != 3 && win != 4) {
900 u32 offset = VIDOSD_D(win);
901 if (win == 0)
902 offset = VIDOSD_C(win);
903 val = state->crtc.w * state->crtc.h;
904 writel(val, ctx->regs + offset);
905
906 DRM_DEV_DEBUG_KMS(ctx->dev, "osd size = 0x%x\n",
907 (unsigned int)val);
908 }
909
910 fimd_win_set_pixfmt(ctx, win, fb, state->src.w);
911
912 /* hardware window 0 doesn't support color key. */
913 if (win != 0)
914 fimd_win_set_colkey(ctx, win);
915
916 fimd_enable_video_output(ctx, win, true);
917
918 if (ctx->driver_data->has_shadowcon)
919 fimd_enable_shadow_channel_path(ctx, win, true);
920
921 if (ctx->i80_if)
922 atomic_set(&ctx->win_updated, 1);
923 }
924
fimd_disable_plane(struct exynos_drm_crtc * crtc,struct exynos_drm_plane * plane)925 static void fimd_disable_plane(struct exynos_drm_crtc *crtc,
926 struct exynos_drm_plane *plane)
927 {
928 struct fimd_context *ctx = crtc->ctx;
929 unsigned int win = plane->index;
930
931 if (ctx->suspended)
932 return;
933
934 fimd_enable_video_output(ctx, win, false);
935
936 if (ctx->driver_data->has_shadowcon)
937 fimd_enable_shadow_channel_path(ctx, win, false);
938 }
939
fimd_atomic_enable(struct exynos_drm_crtc * crtc)940 static void fimd_atomic_enable(struct exynos_drm_crtc *crtc)
941 {
942 struct fimd_context *ctx = crtc->ctx;
943
944 if (!ctx->suspended)
945 return;
946
947 ctx->suspended = false;
948
949 if (pm_runtime_resume_and_get(ctx->dev) < 0) {
950 dev_warn(ctx->dev, "failed to enable FIMD device.\n");
951 return;
952 }
953
954 /* if vblank was enabled status, enable it again. */
955 if (test_and_clear_bit(0, &ctx->irq_flags))
956 fimd_enable_vblank(ctx->crtc);
957
958 fimd_commit(ctx->crtc);
959 }
960
fimd_atomic_disable(struct exynos_drm_crtc * crtc)961 static void fimd_atomic_disable(struct exynos_drm_crtc *crtc)
962 {
963 struct fimd_context *ctx = crtc->ctx;
964 int i;
965
966 if (ctx->suspended)
967 return;
968
969 /*
970 * We need to make sure that all windows are disabled before we
971 * suspend that connector. Otherwise we might try to scan from
972 * a destroyed buffer later.
973 */
974 for (i = 0; i < WINDOWS_NR; i++)
975 fimd_disable_plane(crtc, &ctx->planes[i]);
976
977 fimd_enable_vblank(crtc);
978 fimd_wait_for_vblank(crtc);
979 fimd_disable_vblank(crtc);
980
981 writel(0, ctx->regs + VIDCON0);
982
983 pm_runtime_put_sync(ctx->dev);
984 ctx->suspended = true;
985 }
986
fimd_trigger(struct device * dev)987 static void fimd_trigger(struct device *dev)
988 {
989 struct fimd_context *ctx = dev_get_drvdata(dev);
990 const struct fimd_driver_data *driver_data = ctx->driver_data;
991 void *timing_base = ctx->regs + driver_data->timing_base;
992 u32 reg;
993
994 /*
995 * Skips triggering if in triggering state, because multiple triggering
996 * requests can cause panel reset.
997 */
998 if (atomic_read(&ctx->triggering))
999 return;
1000
1001 /* Enters triggering mode */
1002 atomic_set(&ctx->triggering, 1);
1003
1004 reg = readl(timing_base + TRIGCON);
1005 reg |= (TRGMODE_ENABLE | SWTRGCMD_ENABLE);
1006 writel(reg, timing_base + TRIGCON);
1007
1008 /*
1009 * Exits triggering mode if vblank is not enabled yet, because when the
1010 * VIDINTCON0 register is not set, it can not exit from triggering mode.
1011 */
1012 if (!test_bit(0, &ctx->irq_flags))
1013 atomic_set(&ctx->triggering, 0);
1014 }
1015
fimd_te_handler(struct exynos_drm_crtc * crtc)1016 static void fimd_te_handler(struct exynos_drm_crtc *crtc)
1017 {
1018 struct fimd_context *ctx = crtc->ctx;
1019 u32 trg_type = ctx->driver_data->trg_type;
1020
1021 /* Checks the crtc is detached already from encoder */
1022 if (!ctx->drm_dev)
1023 return;
1024
1025 if (trg_type == I80_HW_TRG)
1026 goto out;
1027
1028 /*
1029 * If there is a page flip request, triggers and handles the page flip
1030 * event so that current fb can be updated into panel GRAM.
1031 */
1032 if (atomic_add_unless(&ctx->win_updated, -1, 0))
1033 fimd_trigger(ctx->dev);
1034
1035 out:
1036 /* Wakes up vsync event queue */
1037 if (atomic_read(&ctx->wait_vsync_event)) {
1038 atomic_set(&ctx->wait_vsync_event, 0);
1039 wake_up(&ctx->wait_vsync_queue);
1040 }
1041
1042 if (test_bit(0, &ctx->irq_flags))
1043 drm_crtc_handle_vblank(&ctx->crtc->base);
1044 }
1045
fimd_dp_clock_enable(struct exynos_drm_clk * clk,bool enable)1046 static void fimd_dp_clock_enable(struct exynos_drm_clk *clk, bool enable)
1047 {
1048 struct fimd_context *ctx = container_of(clk, struct fimd_context,
1049 dp_clk);
1050 u32 val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE;
1051 writel(val, ctx->regs + DP_MIE_CLKCON);
1052 }
1053
1054 static const struct exynos_drm_crtc_ops fimd_crtc_ops = {
1055 .atomic_enable = fimd_atomic_enable,
1056 .atomic_disable = fimd_atomic_disable,
1057 .enable_vblank = fimd_enable_vblank,
1058 .disable_vblank = fimd_disable_vblank,
1059 .atomic_begin = fimd_atomic_begin,
1060 .update_plane = fimd_update_plane,
1061 .disable_plane = fimd_disable_plane,
1062 .atomic_flush = fimd_atomic_flush,
1063 .atomic_check = fimd_atomic_check,
1064 .te_handler = fimd_te_handler,
1065 };
1066
fimd_irq_handler(int irq,void * dev_id)1067 static irqreturn_t fimd_irq_handler(int irq, void *dev_id)
1068 {
1069 struct fimd_context *ctx = (struct fimd_context *)dev_id;
1070 u32 val, clear_bit;
1071
1072 val = readl(ctx->regs + VIDINTCON1);
1073
1074 clear_bit = ctx->i80_if ? VIDINTCON1_INT_I80 : VIDINTCON1_INT_FRAME;
1075 if (val & clear_bit)
1076 writel(clear_bit, ctx->regs + VIDINTCON1);
1077
1078 /* check the crtc is detached already from encoder */
1079 if (!ctx->drm_dev)
1080 goto out;
1081
1082 if (!ctx->i80_if)
1083 drm_crtc_handle_vblank(&ctx->crtc->base);
1084
1085 if (ctx->i80_if) {
1086 /* Exits triggering mode */
1087 atomic_set(&ctx->triggering, 0);
1088 } else {
1089 /* set wait vsync event to zero and wake up queue. */
1090 if (atomic_read(&ctx->wait_vsync_event)) {
1091 atomic_set(&ctx->wait_vsync_event, 0);
1092 wake_up(&ctx->wait_vsync_queue);
1093 }
1094 }
1095
1096 out:
1097 return IRQ_HANDLED;
1098 }
1099
fimd_bind(struct device * dev,struct device * master,void * data)1100 static int fimd_bind(struct device *dev, struct device *master, void *data)
1101 {
1102 struct fimd_context *ctx = dev_get_drvdata(dev);
1103 struct drm_device *drm_dev = data;
1104 struct exynos_drm_plane *exynos_plane;
1105 unsigned int i;
1106 int ret;
1107
1108 ctx->drm_dev = drm_dev;
1109
1110 for (i = 0; i < WINDOWS_NR; i++) {
1111 if (ctx->driver_data->has_bgr_support) {
1112 ctx->configs[i].pixel_formats = fimd_extended_formats;
1113 ctx->configs[i].num_pixel_formats = ARRAY_SIZE(fimd_extended_formats);
1114 } else {
1115 ctx->configs[i].pixel_formats = fimd_formats;
1116 ctx->configs[i].num_pixel_formats = ARRAY_SIZE(fimd_formats);
1117 }
1118
1119 ctx->configs[i].zpos = i;
1120 ctx->configs[i].type = fimd_win_types[i];
1121 ctx->configs[i].capabilities = capabilities[i];
1122 ret = exynos_plane_init(drm_dev, &ctx->planes[i], i,
1123 &ctx->configs[i]);
1124 if (ret)
1125 return ret;
1126 }
1127
1128 exynos_plane = &ctx->planes[DEFAULT_WIN];
1129 ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base,
1130 EXYNOS_DISPLAY_TYPE_LCD, &fimd_crtc_ops, ctx);
1131 if (IS_ERR(ctx->crtc))
1132 return PTR_ERR(ctx->crtc);
1133
1134 if (ctx->driver_data->has_dp_clk) {
1135 ctx->dp_clk.enable = fimd_dp_clock_enable;
1136 ctx->crtc->pipe_clk = &ctx->dp_clk;
1137 }
1138
1139 if (ctx->encoder)
1140 exynos_dpi_bind(drm_dev, ctx->encoder);
1141
1142 if (is_drm_iommu_supported(drm_dev)) {
1143 int ret;
1144
1145 ret = fimd_clear_channels(ctx->crtc);
1146 if (ret < 0)
1147 return ret;
1148 }
1149
1150 return exynos_drm_register_dma(drm_dev, dev, &ctx->dma_priv);
1151 }
1152
fimd_unbind(struct device * dev,struct device * master,void * data)1153 static void fimd_unbind(struct device *dev, struct device *master,
1154 void *data)
1155 {
1156 struct fimd_context *ctx = dev_get_drvdata(dev);
1157
1158 fimd_atomic_disable(ctx->crtc);
1159
1160 exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev, &ctx->dma_priv);
1161
1162 if (ctx->encoder)
1163 exynos_dpi_remove(ctx->encoder);
1164 }
1165
1166 static const struct component_ops fimd_component_ops = {
1167 .bind = fimd_bind,
1168 .unbind = fimd_unbind,
1169 };
1170
fimd_probe(struct platform_device * pdev)1171 static int fimd_probe(struct platform_device *pdev)
1172 {
1173 struct device *dev = &pdev->dev;
1174 struct fimd_context *ctx;
1175 struct device_node *i80_if_timings;
1176 int ret;
1177
1178 if (!dev->of_node)
1179 return -ENODEV;
1180
1181 ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
1182 if (!ctx)
1183 return -ENOMEM;
1184
1185 ctx->dev = dev;
1186 ctx->suspended = true;
1187 ctx->driver_data = of_device_get_match_data(dev);
1188
1189 if (of_property_read_bool(dev->of_node, "samsung,invert-vden"))
1190 ctx->vidcon1 |= VIDCON1_INV_VDEN;
1191 if (of_property_read_bool(dev->of_node, "samsung,invert-vclk"))
1192 ctx->vidcon1 |= VIDCON1_INV_VCLK;
1193
1194 i80_if_timings = of_get_child_by_name(dev->of_node, "i80-if-timings");
1195 if (i80_if_timings) {
1196 u32 val;
1197
1198 ctx->i80_if = true;
1199
1200 if (ctx->driver_data->has_vidoutcon)
1201 ctx->vidout_con |= VIDOUT_CON_F_I80_LDI0;
1202 else
1203 ctx->vidcon0 |= VIDCON0_VIDOUT_I80_LDI0;
1204 /*
1205 * The user manual describes that this "DSI_EN" bit is required
1206 * to enable I80 24-bit data interface.
1207 */
1208 ctx->vidcon0 |= VIDCON0_DSI_EN;
1209
1210 if (of_property_read_u32(i80_if_timings, "cs-setup", &val))
1211 val = 0;
1212 ctx->i80ifcon = LCD_CS_SETUP(val);
1213 if (of_property_read_u32(i80_if_timings, "wr-setup", &val))
1214 val = 0;
1215 ctx->i80ifcon |= LCD_WR_SETUP(val);
1216 if (of_property_read_u32(i80_if_timings, "wr-active", &val))
1217 val = 1;
1218 ctx->i80ifcon |= LCD_WR_ACTIVE(val);
1219 if (of_property_read_u32(i80_if_timings, "wr-hold", &val))
1220 val = 0;
1221 ctx->i80ifcon |= LCD_WR_HOLD(val);
1222 }
1223 of_node_put(i80_if_timings);
1224
1225 ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node,
1226 "samsung,sysreg");
1227 if (IS_ERR(ctx->sysreg)) {
1228 dev_warn(dev, "failed to get system register.\n");
1229 ctx->sysreg = NULL;
1230 }
1231
1232 ctx->bus_clk = devm_clk_get(dev, "fimd");
1233 if (IS_ERR(ctx->bus_clk)) {
1234 dev_err(dev, "failed to get bus clock\n");
1235 return PTR_ERR(ctx->bus_clk);
1236 }
1237
1238 ctx->lcd_clk = devm_clk_get(dev, "sclk_fimd");
1239 if (IS_ERR(ctx->lcd_clk)) {
1240 dev_err(dev, "failed to get lcd clock\n");
1241 return PTR_ERR(ctx->lcd_clk);
1242 }
1243
1244 ctx->regs = devm_platform_ioremap_resource(pdev, 0);
1245 if (IS_ERR(ctx->regs))
1246 return PTR_ERR(ctx->regs);
1247
1248 ret = platform_get_irq_byname(pdev, ctx->i80_if ? "lcd_sys" : "vsync");
1249 if (ret < 0)
1250 return ret;
1251
1252 ret = devm_request_irq(dev, ret, fimd_irq_handler, 0, "drm_fimd", ctx);
1253 if (ret) {
1254 dev_err(dev, "irq request failed.\n");
1255 return ret;
1256 }
1257
1258 init_waitqueue_head(&ctx->wait_vsync_queue);
1259 atomic_set(&ctx->wait_vsync_event, 0);
1260
1261 platform_set_drvdata(pdev, ctx);
1262
1263 ctx->encoder = exynos_dpi_probe(dev);
1264 if (IS_ERR(ctx->encoder))
1265 return PTR_ERR(ctx->encoder);
1266
1267 pm_runtime_enable(dev);
1268
1269 ret = component_add(dev, &fimd_component_ops);
1270 if (ret)
1271 goto err_disable_pm_runtime;
1272
1273 return ret;
1274
1275 err_disable_pm_runtime:
1276 pm_runtime_disable(dev);
1277
1278 return ret;
1279 }
1280
fimd_remove(struct platform_device * pdev)1281 static int fimd_remove(struct platform_device *pdev)
1282 {
1283 pm_runtime_disable(&pdev->dev);
1284
1285 component_del(&pdev->dev, &fimd_component_ops);
1286
1287 return 0;
1288 }
1289
1290 #ifdef CONFIG_PM
exynos_fimd_suspend(struct device * dev)1291 static int exynos_fimd_suspend(struct device *dev)
1292 {
1293 struct fimd_context *ctx = dev_get_drvdata(dev);
1294
1295 clk_disable_unprepare(ctx->lcd_clk);
1296 clk_disable_unprepare(ctx->bus_clk);
1297
1298 return 0;
1299 }
1300
exynos_fimd_resume(struct device * dev)1301 static int exynos_fimd_resume(struct device *dev)
1302 {
1303 struct fimd_context *ctx = dev_get_drvdata(dev);
1304 int ret;
1305
1306 ret = clk_prepare_enable(ctx->bus_clk);
1307 if (ret < 0) {
1308 DRM_DEV_ERROR(dev,
1309 "Failed to prepare_enable the bus clk [%d]\n",
1310 ret);
1311 return ret;
1312 }
1313
1314 ret = clk_prepare_enable(ctx->lcd_clk);
1315 if (ret < 0) {
1316 DRM_DEV_ERROR(dev,
1317 "Failed to prepare_enable the lcd clk [%d]\n",
1318 ret);
1319 return ret;
1320 }
1321
1322 return 0;
1323 }
1324 #endif
1325
1326 static const struct dev_pm_ops exynos_fimd_pm_ops = {
1327 SET_RUNTIME_PM_OPS(exynos_fimd_suspend, exynos_fimd_resume, NULL)
1328 SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
1329 pm_runtime_force_resume)
1330 };
1331
1332 struct platform_driver fimd_driver = {
1333 .probe = fimd_probe,
1334 .remove = fimd_remove,
1335 .driver = {
1336 .name = "exynos4-fb",
1337 .owner = THIS_MODULE,
1338 .pm = &exynos_fimd_pm_ops,
1339 .of_match_table = fimd_driver_dt_match,
1340 },
1341 };
1342