1 /* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
2 /*
3 * core.h - DesignWare HS OTG Controller common declarations
4 *
5 * Copyright (C) 2004-2013 Synopsys, Inc.
6 */
7
8 #ifndef __DWC2_CORE_H__
9 #define __DWC2_CORE_H__
10
11 #include <linux/acpi.h>
12 #include <linux/phy/phy.h>
13 #include <linux/regulator/consumer.h>
14 #include <linux/usb/gadget.h>
15 #include <linux/usb/otg.h>
16 #include <linux/usb/phy.h>
17 #include "hw.h"
18
19 /*
20 * Suggested defines for tracers:
21 * - no_printk: Disable tracing
22 * - pr_info: Print this info to the console
23 * - trace_printk: Print this info to trace buffer (good for verbose logging)
24 */
25
26 #define DWC2_TRACE_SCHEDULER no_printk
27 #define DWC2_TRACE_SCHEDULER_VB no_printk
28
29 /* Detailed scheduler tracing, but won't overwhelm console */
30 #define dwc2_sch_dbg(hsotg, fmt, ...) \
31 DWC2_TRACE_SCHEDULER(pr_fmt("%s: SCH: " fmt), \
32 dev_name(hsotg->dev), ##__VA_ARGS__)
33
34 /* Verbose scheduler tracing */
35 #define dwc2_sch_vdbg(hsotg, fmt, ...) \
36 DWC2_TRACE_SCHEDULER_VB(pr_fmt("%s: SCH: " fmt), \
37 dev_name(hsotg->dev), ##__VA_ARGS__)
38
39 /* Maximum number of Endpoints/HostChannels */
40 #define MAX_EPS_CHANNELS 16
41
42 /* dwc2-hsotg declarations */
43 static const char * const dwc2_hsotg_supply_names[] = {
44 "vusb_d", /* digital USB supply, 1.2V */
45 "vusb_a", /* analog USB supply, 1.1V */
46 };
47
48 #define DWC2_NUM_SUPPLIES ARRAY_SIZE(dwc2_hsotg_supply_names)
49
50 /*
51 * EP0_MPS_LIMIT
52 *
53 * Unfortunately there seems to be a limit of the amount of data that can
54 * be transferred by IN transactions on EP0. This is either 127 bytes or 3
55 * packets (which practically means 1 packet and 63 bytes of data) when the
56 * MPS is set to 64.
57 *
58 * This means if we are wanting to move >127 bytes of data, we need to
59 * split the transactions up, but just doing one packet at a time does
60 * not work (this may be an implicit DATA0 PID on first packet of the
61 * transaction) and doing 2 packets is outside the controller's limits.
62 *
63 * If we try to lower the MPS size for EP0, then no transfers work properly
64 * for EP0, and the system will fail basic enumeration. As no cause for this
65 * has currently been found, we cannot support any large IN transfers for
66 * EP0.
67 */
68 #define EP0_MPS_LIMIT 64
69
70 struct dwc2_hsotg;
71 struct dwc2_hsotg_req;
72
73 /**
74 * struct dwc2_hsotg_ep - driver endpoint definition.
75 * @ep: The gadget layer representation of the endpoint.
76 * @name: The driver generated name for the endpoint.
77 * @queue: Queue of requests for this endpoint.
78 * @parent: Reference back to the parent device structure.
79 * @req: The current request that the endpoint is processing. This is
80 * used to indicate an request has been loaded onto the endpoint
81 * and has yet to be completed (maybe due to data move, or simply
82 * awaiting an ack from the core all the data has been completed).
83 * @debugfs: File entry for debugfs file for this endpoint.
84 * @dir_in: Set to true if this endpoint is of the IN direction, which
85 * means that it is sending data to the Host.
86 * @map_dir: Set to the value of dir_in when the DMA buffer is mapped.
87 * @index: The index for the endpoint registers.
88 * @mc: Multi Count - number of transactions per microframe
89 * @interval: Interval for periodic endpoints, in frames or microframes.
90 * @name: The name array passed to the USB core.
91 * @halted: Set if the endpoint has been halted.
92 * @periodic: Set if this is a periodic ep, such as Interrupt
93 * @isochronous: Set if this is a isochronous ep
94 * @send_zlp: Set if we need to send a zero-length packet.
95 * @wedged: Set if ep is wedged.
96 * @desc_list_dma: The DMA address of descriptor chain currently in use.
97 * @desc_list: Pointer to descriptor DMA chain head currently in use.
98 * @desc_count: Count of entries within the DMA descriptor chain of EP.
99 * @next_desc: index of next free descriptor in the ISOC chain under SW control.
100 * @compl_desc: index of next descriptor to be completed by xFerComplete
101 * @total_data: The total number of data bytes done.
102 * @fifo_size: The size of the FIFO (for periodic IN endpoints)
103 * @fifo_index: For Dedicated FIFO operation, only FIFO0 can be used for EP0.
104 * @fifo_load: The amount of data loaded into the FIFO (periodic IN)
105 * @last_load: The offset of data for the last start of request.
106 * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN
107 * @target_frame: Targeted frame num to setup next ISOC transfer
108 * @frame_overrun: Indicates SOF number overrun in DSTS
109 *
110 * This is the driver's state for each registered endpoint, allowing it
111 * to keep track of transactions that need doing. Each endpoint has a
112 * lock to protect the state, to try and avoid using an overall lock
113 * for the host controller as much as possible.
114 *
115 * For periodic IN endpoints, we have fifo_size and fifo_load to try
116 * and keep track of the amount of data in the periodic FIFO for each
117 * of these as we don't have a status register that tells us how much
118 * is in each of them. (note, this may actually be useless information
119 * as in shared-fifo mode periodic in acts like a single-frame packet
120 * buffer than a fifo)
121 */
122 struct dwc2_hsotg_ep {
123 struct usb_ep ep;
124 struct list_head queue;
125 struct dwc2_hsotg *parent;
126 struct dwc2_hsotg_req *req;
127 struct dentry *debugfs;
128
129 unsigned long total_data;
130 unsigned int size_loaded;
131 unsigned int last_load;
132 unsigned int fifo_load;
133 unsigned short fifo_size;
134 unsigned short fifo_index;
135
136 unsigned char dir_in;
137 unsigned char map_dir;
138 unsigned char index;
139 unsigned char mc;
140 u16 interval;
141
142 unsigned int halted:1;
143 unsigned int periodic:1;
144 unsigned int isochronous:1;
145 unsigned int send_zlp:1;
146 unsigned int wedged:1;
147 unsigned int target_frame;
148 #define TARGET_FRAME_INITIAL 0xFFFFFFFF
149 bool frame_overrun;
150
151 dma_addr_t desc_list_dma;
152 struct dwc2_dma_desc *desc_list;
153 u8 desc_count;
154
155 unsigned int next_desc;
156 unsigned int compl_desc;
157
158 char name[10];
159 };
160
161 /**
162 * struct dwc2_hsotg_req - data transfer request
163 * @req: The USB gadget request
164 * @queue: The list of requests for the endpoint this is queued for.
165 * @saved_req_buf: variable to save req.buf when bounce buffers are used.
166 */
167 struct dwc2_hsotg_req {
168 struct usb_request req;
169 struct list_head queue;
170 void *saved_req_buf;
171 };
172
173 #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
174 IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
175 #define call_gadget(_hs, _entry) \
176 do { \
177 if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \
178 (_hs)->driver && (_hs)->driver->_entry) { \
179 spin_unlock(&_hs->lock); \
180 (_hs)->driver->_entry(&(_hs)->gadget); \
181 spin_lock(&_hs->lock); \
182 } \
183 } while (0)
184 #else
185 #define call_gadget(_hs, _entry) do {} while (0)
186 #endif
187
188 struct dwc2_hsotg;
189 struct dwc2_host_chan;
190
191 /* Device States */
192 enum dwc2_lx_state {
193 DWC2_L0, /* On state */
194 DWC2_L1, /* LPM sleep state */
195 DWC2_L2, /* USB suspend state */
196 DWC2_L3, /* Off state */
197 };
198
199 /* Gadget ep0 states */
200 enum dwc2_ep0_state {
201 DWC2_EP0_SETUP,
202 DWC2_EP0_DATA_IN,
203 DWC2_EP0_DATA_OUT,
204 DWC2_EP0_STATUS_IN,
205 DWC2_EP0_STATUS_OUT,
206 };
207
208 /**
209 * struct dwc2_core_params - Parameters for configuring the core
210 *
211 * @otg_caps: Specifies the OTG capabilities. OTG caps from the platform parameters,
212 * used to setup the:
213 * - HNP and SRP capable
214 * - SRP Only capable
215 * - No HNP/SRP capable (always available)
216 * Defaults to best available option
217 * - OTG revision number the device is compliant with, in binary-coded
218 * decimal (i.e. 2.0 is 0200H). (see struct usb_otg_caps)
219 * @host_dma: Specifies whether to use slave or DMA mode for accessing
220 * the data FIFOs. The driver will automatically detect the
221 * value for this parameter if none is specified.
222 * 0 - Slave (always available)
223 * 1 - DMA (default, if available)
224 * @dma_desc_enable: When DMA mode is enabled, specifies whether to use
225 * address DMA mode or descriptor DMA mode for accessing
226 * the data FIFOs. The driver will automatically detect the
227 * value for this if none is specified.
228 * 0 - Address DMA
229 * 1 - Descriptor DMA (default, if available)
230 * @dma_desc_fs_enable: When DMA mode is enabled, specifies whether to use
231 * address DMA mode or descriptor DMA mode for accessing
232 * the data FIFOs in Full Speed mode only. The driver
233 * will automatically detect the value for this if none is
234 * specified.
235 * 0 - Address DMA
236 * 1 - Descriptor DMA in FS (default, if available)
237 * @speed: Specifies the maximum speed of operation in host and
238 * device mode. The actual speed depends on the speed of
239 * the attached device and the value of phy_type.
240 * 0 - High Speed
241 * (default when phy_type is UTMI+ or ULPI)
242 * 1 - Full Speed
243 * (default when phy_type is Full Speed)
244 * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters
245 * 1 - Allow dynamic FIFO sizing (default, if available)
246 * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs
247 * are enabled for non-periodic IN endpoints in device
248 * mode.
249 * @host_rx_fifo_size: Number of 4-byte words in the Rx FIFO in host mode when
250 * dynamic FIFO sizing is enabled
251 * 16 to 32768
252 * Actual maximum value is autodetected and also
253 * the default.
254 * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO
255 * in host mode when dynamic FIFO sizing is enabled
256 * 16 to 32768
257 * Actual maximum value is autodetected and also
258 * the default.
259 * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in
260 * host mode when dynamic FIFO sizing is enabled
261 * 16 to 32768
262 * Actual maximum value is autodetected and also
263 * the default.
264 * @max_transfer_size: The maximum transfer size supported, in bytes
265 * 2047 to 65,535
266 * Actual maximum value is autodetected and also
267 * the default.
268 * @max_packet_count: The maximum number of packets in a transfer
269 * 15 to 511
270 * Actual maximum value is autodetected and also
271 * the default.
272 * @host_channels: The number of host channel registers to use
273 * 1 to 16
274 * Actual maximum value is autodetected and also
275 * the default.
276 * @phy_type: Specifies the type of PHY interface to use. By default,
277 * the driver will automatically detect the phy_type.
278 * 0 - Full Speed Phy
279 * 1 - UTMI+ Phy
280 * 2 - ULPI Phy
281 * Defaults to best available option (2, 1, then 0)
282 * @phy_utmi_width: Specifies the UTMI+ Data Width (in bits). This parameter
283 * is applicable for a phy_type of UTMI+ or ULPI. (For a
284 * ULPI phy_type, this parameter indicates the data width
285 * between the MAC and the ULPI Wrapper.) Also, this
286 * parameter is applicable only if the OTG_HSPHY_WIDTH cC
287 * parameter was set to "8 and 16 bits", meaning that the
288 * core has been configured to work at either data path
289 * width.
290 * 8 or 16 (default 16 if available)
291 * @phy_ulpi_ddr: Specifies whether the ULPI operates at double or single
292 * data rate. This parameter is only applicable if phy_type
293 * is ULPI.
294 * 0 - single data rate ULPI interface with 8 bit wide
295 * data bus (default)
296 * 1 - double data rate ULPI interface with 4 bit wide
297 * data bus
298 * @phy_ulpi_ext_vbus: For a ULPI phy, specifies whether to use the internal or
299 * external supply to drive the VBus
300 * 0 - Internal supply (default)
301 * 1 - External supply
302 * @i2c_enable: Specifies whether to use the I2Cinterface for a full
303 * speed PHY. This parameter is only applicable if phy_type
304 * is FS.
305 * 0 - No (default)
306 * 1 - Yes
307 * @ipg_isoc_en: Indicates the IPG supports is enabled or disabled.
308 * 0 - Disable (default)
309 * 1 - Enable
310 * @acg_enable: For enabling Active Clock Gating in the controller
311 * 0 - No
312 * 1 - Yes
313 * @ulpi_fs_ls: Make ULPI phy operate in FS/LS mode only
314 * 0 - No (default)
315 * 1 - Yes
316 * @host_support_fs_ls_low_power: Specifies whether low power mode is supported
317 * when attached to a Full Speed or Low Speed device in
318 * host mode.
319 * 0 - Don't support low power mode (default)
320 * 1 - Support low power mode
321 * @host_ls_low_power_phy_clk: Specifies the PHY clock rate in low power mode
322 * when connected to a Low Speed device in host
323 * mode. This parameter is applicable only if
324 * host_support_fs_ls_low_power is enabled.
325 * 0 - 48 MHz
326 * (default when phy_type is UTMI+ or ULPI)
327 * 1 - 6 MHz
328 * (default when phy_type is Full Speed)
329 * @oc_disable: Flag to disable overcurrent condition.
330 * 0 - Allow overcurrent condition to get detected
331 * 1 - Disable overcurrent condtion to get detected
332 * @ts_dline: Enable Term Select Dline pulsing
333 * 0 - No (default)
334 * 1 - Yes
335 * @reload_ctl: Allow dynamic reloading of HFIR register during runtime
336 * 0 - No (default for core < 2.92a)
337 * 1 - Yes (default for core >= 2.92a)
338 * @ahbcfg: This field allows the default value of the GAHBCFG
339 * register to be overridden
340 * -1 - GAHBCFG value will be set to 0x06
341 * (INCR, default)
342 * all others - GAHBCFG value will be overridden with
343 * this value
344 * Not all bits can be controlled like this, the
345 * bits defined by GAHBCFG_CTRL_MASK are controlled
346 * by the driver and are ignored in this
347 * configuration value.
348 * @uframe_sched: True to enable the microframe scheduler
349 * @external_id_pin_ctl: Specifies whether ID pin is handled externally.
350 * Disable CONIDSTSCHNG controller interrupt in such
351 * case.
352 * 0 - No (default)
353 * 1 - Yes
354 * @power_down: Specifies whether the controller support power_down.
355 * If power_down is enabled, the controller will enter
356 * power_down in both peripheral and host mode when
357 * needed.
358 * 0 - No (default)
359 * 1 - Partial power down
360 * 2 - Hibernation
361 * @no_clock_gating: Specifies whether to avoid clock gating feature.
362 * 0 - No (use clock gating)
363 * 1 - Yes (avoid it)
364 * @lpm: Enable LPM support.
365 * 0 - No
366 * 1 - Yes
367 * @lpm_clock_gating: Enable core PHY clock gating.
368 * 0 - No
369 * 1 - Yes
370 * @besl: Enable LPM Errata support.
371 * 0 - No
372 * 1 - Yes
373 * @hird_threshold_en: HIRD or HIRD Threshold enable.
374 * 0 - No
375 * 1 - Yes
376 * @hird_threshold: Value of BESL or HIRD Threshold.
377 * @ref_clk_per: Indicates in terms of pico seconds the period
378 * of ref_clk.
379 * 62500 - 16MHz
380 * 58823 - 17MHz
381 * 52083 - 19.2MHz
382 * 50000 - 20MHz
383 * 41666 - 24MHz
384 * 33333 - 30MHz (default)
385 * 25000 - 40MHz
386 * @sof_cnt_wkup_alert: Indicates in term of number of SOF's after which
387 * the controller should generate an interrupt if the
388 * device had been in L1 state until that period.
389 * This is used by SW to initiate Remote WakeUp in the
390 * controller so as to sync to the uF number from the host.
391 * @activate_stm_fs_transceiver: Activate internal transceiver using GGPIO
392 * register.
393 * 0 - Deactivate the transceiver (default)
394 * 1 - Activate the transceiver
395 * @activate_stm_id_vb_detection: Activate external ID pin and Vbus level
396 * detection using GGPIO register.
397 * 0 - Deactivate the external level detection (default)
398 * 1 - Activate the external level detection
399 * @activate_ingenic_overcurrent_detection: Activate Ingenic overcurrent
400 * detection.
401 * 0 - Deactivate the overcurrent detection
402 * 1 - Activate the overcurrent detection (default)
403 * @g_dma: Enables gadget dma usage (default: autodetect).
404 * @g_dma_desc: Enables gadget descriptor DMA (default: autodetect).
405 * @g_rx_fifo_size: The periodic rx fifo size for the device, in
406 * DWORDS from 16-32768 (default: 2048 if
407 * possible, otherwise autodetect).
408 * @g_np_tx_fifo_size: The non-periodic tx fifo size for the device in
409 * DWORDS from 16-32768 (default: 1024 if
410 * possible, otherwise autodetect).
411 * @g_tx_fifo_size: An array of TX fifo sizes in dedicated fifo
412 * mode. Each value corresponds to one EP
413 * starting from EP1 (max 15 values). Sizes are
414 * in DWORDS with possible values from
415 * 16-32768 (default: 256, 256, 256, 256, 768,
416 * 768, 768, 768, 0, 0, 0, 0, 0, 0, 0).
417 * @change_speed_quirk: Change speed configuration to DWC2_SPEED_PARAM_FULL
418 * while full&low speed device connect. And change speed
419 * back to DWC2_SPEED_PARAM_HIGH while device is gone.
420 * 0 - No (default)
421 * 1 - Yes
422 * @service_interval: Enable service interval based scheduling.
423 * 0 - No
424 * 1 - Yes
425 *
426 * The following parameters may be specified when starting the module. These
427 * parameters define how the DWC_otg controller should be configured. A
428 * value of -1 (or any other out of range value) for any parameter means
429 * to read the value from hardware (if possible) or use the builtin
430 * default described above.
431 */
432 struct dwc2_core_params {
433 struct usb_otg_caps otg_caps;
434 u8 phy_type;
435 #define DWC2_PHY_TYPE_PARAM_FS 0
436 #define DWC2_PHY_TYPE_PARAM_UTMI 1
437 #define DWC2_PHY_TYPE_PARAM_ULPI 2
438
439 u8 speed;
440 #define DWC2_SPEED_PARAM_HIGH 0
441 #define DWC2_SPEED_PARAM_FULL 1
442 #define DWC2_SPEED_PARAM_LOW 2
443
444 u8 phy_utmi_width;
445 bool phy_ulpi_ddr;
446 bool phy_ulpi_ext_vbus;
447 bool enable_dynamic_fifo;
448 bool en_multiple_tx_fifo;
449 bool i2c_enable;
450 bool acg_enable;
451 bool ulpi_fs_ls;
452 bool ts_dline;
453 bool reload_ctl;
454 bool uframe_sched;
455 bool external_id_pin_ctl;
456
457 int power_down;
458 #define DWC2_POWER_DOWN_PARAM_NONE 0
459 #define DWC2_POWER_DOWN_PARAM_PARTIAL 1
460 #define DWC2_POWER_DOWN_PARAM_HIBERNATION 2
461 bool no_clock_gating;
462
463 bool lpm;
464 bool lpm_clock_gating;
465 bool besl;
466 bool hird_threshold_en;
467 bool service_interval;
468 u8 hird_threshold;
469 bool activate_stm_fs_transceiver;
470 bool activate_stm_id_vb_detection;
471 bool activate_ingenic_overcurrent_detection;
472 bool ipg_isoc_en;
473 u16 max_packet_count;
474 u32 max_transfer_size;
475 u32 ahbcfg;
476
477 /* GREFCLK parameters */
478 u32 ref_clk_per;
479 u16 sof_cnt_wkup_alert;
480
481 /* Host parameters */
482 bool host_dma;
483 bool dma_desc_enable;
484 bool dma_desc_fs_enable;
485 bool host_support_fs_ls_low_power;
486 bool host_ls_low_power_phy_clk;
487 bool oc_disable;
488
489 u8 host_channels;
490 u16 host_rx_fifo_size;
491 u16 host_nperio_tx_fifo_size;
492 u16 host_perio_tx_fifo_size;
493
494 /* Gadget parameters */
495 bool g_dma;
496 bool g_dma_desc;
497 u32 g_rx_fifo_size;
498 u32 g_np_tx_fifo_size;
499 u32 g_tx_fifo_size[MAX_EPS_CHANNELS];
500
501 bool change_speed_quirk;
502 };
503
504 /**
505 * struct dwc2_hw_params - Autodetected parameters.
506 *
507 * These parameters are the various parameters read from hardware
508 * registers during initialization. They typically contain the best
509 * supported or maximum value that can be configured in the
510 * corresponding dwc2_core_params value.
511 *
512 * The values that are not in dwc2_core_params are documented below.
513 *
514 * @op_mode: Mode of Operation
515 * 0 - HNP- and SRP-Capable OTG (Host & Device)
516 * 1 - SRP-Capable OTG (Host & Device)
517 * 2 - Non-HNP and Non-SRP Capable OTG (Host & Device)
518 * 3 - SRP-Capable Device
519 * 4 - Non-OTG Device
520 * 5 - SRP-Capable Host
521 * 6 - Non-OTG Host
522 * @arch: Architecture
523 * 0 - Slave only
524 * 1 - External DMA
525 * 2 - Internal DMA
526 * @ipg_isoc_en: This feature indicates that the controller supports
527 * the worst-case scenario of Rx followed by Rx
528 * Interpacket Gap (IPG) (32 bitTimes) as per the utmi
529 * specification for any token following ISOC OUT token.
530 * 0 - Don't support
531 * 1 - Support
532 * @power_optimized: Are power optimizations enabled?
533 * @num_dev_ep: Number of device endpoints available
534 * @num_dev_in_eps: Number of device IN endpoints available
535 * @num_dev_perio_in_ep: Number of device periodic IN endpoints
536 * available
537 * @dev_token_q_depth: Device Mode IN Token Sequence Learning Queue
538 * Depth
539 * 0 to 30
540 * @host_perio_tx_q_depth:
541 * Host Mode Periodic Request Queue Depth
542 * 2, 4 or 8
543 * @nperio_tx_q_depth:
544 * Non-Periodic Request Queue Depth
545 * 2, 4 or 8
546 * @hs_phy_type: High-speed PHY interface type
547 * 0 - High-speed interface not supported
548 * 1 - UTMI+
549 * 2 - ULPI
550 * 3 - UTMI+ and ULPI
551 * @fs_phy_type: Full-speed PHY interface type
552 * 0 - Full speed interface not supported
553 * 1 - Dedicated full speed interface
554 * 2 - FS pins shared with UTMI+ pins
555 * 3 - FS pins shared with ULPI pins
556 * @total_fifo_size: Total internal RAM for FIFOs (bytes)
557 * @hibernation: Is hibernation enabled?
558 * @utmi_phy_data_width: UTMI+ PHY data width
559 * 0 - 8 bits
560 * 1 - 16 bits
561 * 2 - 8 or 16 bits
562 * @snpsid: Value from SNPSID register
563 * @dev_ep_dirs: Direction of device endpoints (GHWCFG1)
564 * @g_tx_fifo_size: Power-on values of TxFIFO sizes
565 * @dma_desc_enable: When DMA mode is enabled, specifies whether to use
566 * address DMA mode or descriptor DMA mode for accessing
567 * the data FIFOs. The driver will automatically detect the
568 * value for this if none is specified.
569 * 0 - Address DMA
570 * 1 - Descriptor DMA (default, if available)
571 * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters
572 * 1 - Allow dynamic FIFO sizing (default, if available)
573 * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs
574 * are enabled for non-periodic IN endpoints in device
575 * mode.
576 * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO
577 * in host mode when dynamic FIFO sizing is enabled
578 * 16 to 32768
579 * Actual maximum value is autodetected and also
580 * the default.
581 * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in
582 * host mode when dynamic FIFO sizing is enabled
583 * 16 to 32768
584 * Actual maximum value is autodetected and also
585 * the default.
586 * @max_transfer_size: The maximum transfer size supported, in bytes
587 * 2047 to 65,535
588 * Actual maximum value is autodetected and also
589 * the default.
590 * @max_packet_count: The maximum number of packets in a transfer
591 * 15 to 511
592 * Actual maximum value is autodetected and also
593 * the default.
594 * @host_channels: The number of host channel registers to use
595 * 1 to 16
596 * Actual maximum value is autodetected and also
597 * the default.
598 * @dev_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO
599 * in device mode when dynamic FIFO sizing is enabled
600 * 16 to 32768
601 * Actual maximum value is autodetected and also
602 * the default.
603 * @i2c_enable: Specifies whether to use the I2Cinterface for a full
604 * speed PHY. This parameter is only applicable if phy_type
605 * is FS.
606 * 0 - No (default)
607 * 1 - Yes
608 * @acg_enable: For enabling Active Clock Gating in the controller
609 * 0 - Disable
610 * 1 - Enable
611 * @lpm_mode: For enabling Link Power Management in the controller
612 * 0 - Disable
613 * 1 - Enable
614 * @rx_fifo_size: Number of 4-byte words in the Rx FIFO when dynamic
615 * FIFO sizing is enabled 16 to 32768
616 * Actual maximum value is autodetected and also
617 * the default.
618 * @service_interval_mode: For enabling service interval based scheduling in the
619 * controller.
620 * 0 - Disable
621 * 1 - Enable
622 */
623 struct dwc2_hw_params {
624 unsigned op_mode:3;
625 unsigned arch:2;
626 unsigned dma_desc_enable:1;
627 unsigned enable_dynamic_fifo:1;
628 unsigned en_multiple_tx_fifo:1;
629 unsigned rx_fifo_size:16;
630 unsigned host_nperio_tx_fifo_size:16;
631 unsigned dev_nperio_tx_fifo_size:16;
632 unsigned host_perio_tx_fifo_size:16;
633 unsigned nperio_tx_q_depth:3;
634 unsigned host_perio_tx_q_depth:3;
635 unsigned dev_token_q_depth:5;
636 unsigned max_transfer_size:26;
637 unsigned max_packet_count:11;
638 unsigned host_channels:5;
639 unsigned hs_phy_type:2;
640 unsigned fs_phy_type:2;
641 unsigned i2c_enable:1;
642 unsigned acg_enable:1;
643 unsigned num_dev_ep:4;
644 unsigned num_dev_in_eps : 4;
645 unsigned num_dev_perio_in_ep:4;
646 unsigned total_fifo_size:16;
647 unsigned power_optimized:1;
648 unsigned hibernation:1;
649 unsigned utmi_phy_data_width:2;
650 unsigned lpm_mode:1;
651 unsigned ipg_isoc_en:1;
652 unsigned service_interval_mode:1;
653 u32 snpsid;
654 u32 dev_ep_dirs;
655 u32 g_tx_fifo_size[MAX_EPS_CHANNELS];
656 };
657
658 /* Size of control and EP0 buffers */
659 #define DWC2_CTRL_BUFF_SIZE 8
660
661 /**
662 * struct dwc2_gregs_backup - Holds global registers state before
663 * entering partial power down
664 * @gotgctl: Backup of GOTGCTL register
665 * @gintmsk: Backup of GINTMSK register
666 * @gahbcfg: Backup of GAHBCFG register
667 * @gusbcfg: Backup of GUSBCFG register
668 * @grxfsiz: Backup of GRXFSIZ register
669 * @gnptxfsiz: Backup of GNPTXFSIZ register
670 * @gi2cctl: Backup of GI2CCTL register
671 * @glpmcfg: Backup of GLPMCFG register
672 * @gdfifocfg: Backup of GDFIFOCFG register
673 * @pcgcctl: Backup of PCGCCTL register
674 * @pcgcctl1: Backup of PCGCCTL1 register
675 * @dtxfsiz: Backup of DTXFSIZ registers for each endpoint
676 * @gpwrdn: Backup of GPWRDN register
677 * @valid: True if registers values backuped.
678 */
679 struct dwc2_gregs_backup {
680 u32 gotgctl;
681 u32 gintmsk;
682 u32 gahbcfg;
683 u32 gusbcfg;
684 u32 grxfsiz;
685 u32 gnptxfsiz;
686 u32 gi2cctl;
687 u32 glpmcfg;
688 u32 pcgcctl;
689 u32 pcgcctl1;
690 u32 gdfifocfg;
691 u32 gpwrdn;
692 bool valid;
693 };
694
695 /**
696 * struct dwc2_dregs_backup - Holds device registers state before
697 * entering partial power down
698 * @dcfg: Backup of DCFG register
699 * @dctl: Backup of DCTL register
700 * @daintmsk: Backup of DAINTMSK register
701 * @diepmsk: Backup of DIEPMSK register
702 * @doepmsk: Backup of DOEPMSK register
703 * @diepctl: Backup of DIEPCTL register
704 * @dieptsiz: Backup of DIEPTSIZ register
705 * @diepdma: Backup of DIEPDMA register
706 * @doepctl: Backup of DOEPCTL register
707 * @doeptsiz: Backup of DOEPTSIZ register
708 * @doepdma: Backup of DOEPDMA register
709 * @dtxfsiz: Backup of DTXFSIZ registers for each endpoint
710 * @valid: True if registers values backuped.
711 */
712 struct dwc2_dregs_backup {
713 u32 dcfg;
714 u32 dctl;
715 u32 daintmsk;
716 u32 diepmsk;
717 u32 doepmsk;
718 u32 diepctl[MAX_EPS_CHANNELS];
719 u32 dieptsiz[MAX_EPS_CHANNELS];
720 u32 diepdma[MAX_EPS_CHANNELS];
721 u32 doepctl[MAX_EPS_CHANNELS];
722 u32 doeptsiz[MAX_EPS_CHANNELS];
723 u32 doepdma[MAX_EPS_CHANNELS];
724 u32 dtxfsiz[MAX_EPS_CHANNELS];
725 bool valid;
726 };
727
728 /**
729 * struct dwc2_hregs_backup - Holds host registers state before
730 * entering partial power down
731 * @hcfg: Backup of HCFG register
732 * @haintmsk: Backup of HAINTMSK register
733 * @hcintmsk: Backup of HCINTMSK register
734 * @hprt0: Backup of HPTR0 register
735 * @hfir: Backup of HFIR register
736 * @hptxfsiz: Backup of HPTXFSIZ register
737 * @valid: True if registers values backuped.
738 */
739 struct dwc2_hregs_backup {
740 u32 hcfg;
741 u32 haintmsk;
742 u32 hcintmsk[MAX_EPS_CHANNELS];
743 u32 hprt0;
744 u32 hfir;
745 u32 hptxfsiz;
746 bool valid;
747 };
748
749 /*
750 * Constants related to high speed periodic scheduling
751 *
752 * We have a periodic schedule that is DWC2_HS_SCHEDULE_UFRAMES long. From a
753 * reservation point of view it's assumed that the schedule goes right back to
754 * the beginning after the end of the schedule.
755 *
756 * What does that mean for scheduling things with a long interval? It means
757 * we'll reserve time for them in every possible microframe that they could
758 * ever be scheduled in. ...but we'll still only actually schedule them as
759 * often as they were requested.
760 *
761 * We keep our schedule in a "bitmap" structure. This simplifies having
762 * to keep track of and merge intervals: we just let the bitmap code do most
763 * of the heavy lifting. In a way scheduling is much like memory allocation.
764 *
765 * We schedule 100us per uframe or 80% of 125us (the maximum amount you're
766 * supposed to schedule for periodic transfers). That's according to spec.
767 *
768 * Note that though we only schedule 80% of each microframe, the bitmap that we
769 * keep the schedule in is tightly packed (AKA it doesn't have 100us worth of
770 * space for each uFrame).
771 *
772 * Requirements:
773 * - DWC2_HS_SCHEDULE_UFRAMES must even divide 0x4000 (HFNUM_MAX_FRNUM + 1)
774 * - DWC2_HS_SCHEDULE_UFRAMES must be 8 times DWC2_LS_SCHEDULE_FRAMES (probably
775 * could be any multiple of 8 times DWC2_LS_SCHEDULE_FRAMES, but there might
776 * be bugs). The 8 comes from the USB spec: number of microframes per frame.
777 */
778 #define DWC2_US_PER_UFRAME 125
779 #define DWC2_HS_PERIODIC_US_PER_UFRAME 100
780
781 #define DWC2_HS_SCHEDULE_UFRAMES 8
782 #define DWC2_HS_SCHEDULE_US (DWC2_HS_SCHEDULE_UFRAMES * \
783 DWC2_HS_PERIODIC_US_PER_UFRAME)
784
785 /*
786 * Constants related to low speed scheduling
787 *
788 * For high speed we schedule every 1us. For low speed that's a bit overkill,
789 * so we make up a unit called a "slice" that's worth 25us. There are 40
790 * slices in a full frame and we can schedule 36 of those (90%) for periodic
791 * transfers.
792 *
793 * Our low speed schedule can be as short as 1 frame or could be longer. When
794 * we only schedule 1 frame it means that we'll need to reserve a time every
795 * frame even for things that only transfer very rarely, so something that runs
796 * every 2048 frames will get time reserved in every frame. Our low speed
797 * schedule can be longer and we'll be able to handle more overlap, but that
798 * will come at increased memory cost and increased time to schedule.
799 *
800 * Note: one other advantage of a short low speed schedule is that if we mess
801 * up and miss scheduling we can jump in and use any of the slots that we
802 * happened to reserve.
803 *
804 * With 25 us per slice and 1 frame in the schedule, we only need 4 bytes for
805 * the schedule. There will be one schedule per TT.
806 *
807 * Requirements:
808 * - DWC2_US_PER_SLICE must evenly divide DWC2_LS_PERIODIC_US_PER_FRAME.
809 */
810 #define DWC2_US_PER_SLICE 25
811 #define DWC2_SLICES_PER_UFRAME (DWC2_US_PER_UFRAME / DWC2_US_PER_SLICE)
812
813 #define DWC2_ROUND_US_TO_SLICE(us) \
814 (DIV_ROUND_UP((us), DWC2_US_PER_SLICE) * \
815 DWC2_US_PER_SLICE)
816
817 #define DWC2_LS_PERIODIC_US_PER_FRAME \
818 900
819 #define DWC2_LS_PERIODIC_SLICES_PER_FRAME \
820 (DWC2_LS_PERIODIC_US_PER_FRAME / \
821 DWC2_US_PER_SLICE)
822
823 #define DWC2_LS_SCHEDULE_FRAMES 1
824 #define DWC2_LS_SCHEDULE_SLICES (DWC2_LS_SCHEDULE_FRAMES * \
825 DWC2_LS_PERIODIC_SLICES_PER_FRAME)
826
827 /**
828 * struct dwc2_hsotg - Holds the state of the driver, including the non-periodic
829 * and periodic schedules
830 *
831 * These are common for both host and peripheral modes:
832 *
833 * @dev: The struct device pointer
834 * @regs: Pointer to controller regs
835 * @hw_params: Parameters that were autodetected from the
836 * hardware registers
837 * @params: Parameters that define how the core should be configured
838 * @op_state: The operational State, during transitions (a_host=>
839 * a_peripheral and b_device=>b_host) this may not match
840 * the core, but allows the software to determine
841 * transitions
842 * @dr_mode: Requested mode of operation, one of following:
843 * - USB_DR_MODE_PERIPHERAL
844 * - USB_DR_MODE_HOST
845 * - USB_DR_MODE_OTG
846 * @role_sw: usb_role_switch handle
847 * @role_sw_default_mode: default operation mode of controller while usb role
848 * is USB_ROLE_NONE
849 * @hcd_enabled: Host mode sub-driver initialization indicator.
850 * @gadget_enabled: Peripheral mode sub-driver initialization indicator.
851 * @ll_hw_enabled: Status of low-level hardware resources.
852 * @hibernated: True if core is hibernated
853 * @in_ppd: True if core is partial power down mode.
854 * @bus_suspended: True if bus is suspended
855 * @reset_phy_on_wake: Quirk saying that we should assert PHY reset on a
856 * remote wakeup.
857 * @phy_off_for_suspend: Status of whether we turned the PHY off at suspend.
858 * @need_phy_for_wake: Quirk saying that we should keep the PHY on at
859 * suspend if we need USB to wake us up.
860 * @frame_number: Frame number read from the core. For both device
861 * and host modes. The value ranges are from 0
862 * to HFNUM_MAX_FRNUM.
863 * @phy: The otg phy transceiver structure for phy control.
864 * @uphy: The otg phy transceiver structure for old USB phy
865 * control.
866 * @plat: The platform specific configuration data. This can be
867 * removed once all SoCs support usb transceiver.
868 * @supplies: Definition of USB power supplies
869 * @vbus_supply: Regulator supplying vbus.
870 * @usb33d: Optional 3.3v regulator used on some stm32 devices to
871 * supply ID and VBUS detection hardware.
872 * @lock: Spinlock that protects all the driver data structures
873 * @priv: Stores a pointer to the struct usb_hcd
874 * @queuing_high_bandwidth: True if multiple packets of a high-bandwidth
875 * transfer are in process of being queued
876 * @srp_success: Stores status of SRP request in the case of a FS PHY
877 * with an I2C interface
878 * @wq_otg: Workqueue object used for handling of some interrupts
879 * @wf_otg: Work object for handling Connector ID Status Change
880 * interrupt
881 * @wkp_timer: Timer object for handling Wakeup Detected interrupt
882 * @lx_state: Lx state of connected device
883 * @gr_backup: Backup of global registers during suspend
884 * @dr_backup: Backup of device registers during suspend
885 * @hr_backup: Backup of host registers during suspend
886 * @needs_byte_swap: Specifies whether the opposite endianness.
887 *
888 * These are for host mode:
889 *
890 * @flags: Flags for handling root port state changes
891 * @flags.d32: Contain all root port flags
892 * @flags.b: Separate root port flags from each other
893 * @flags.b.port_connect_status_change: True if root port connect status
894 * changed
895 * @flags.b.port_connect_status: True if device connected to root port
896 * @flags.b.port_reset_change: True if root port reset status changed
897 * @flags.b.port_enable_change: True if root port enable status changed
898 * @flags.b.port_suspend_change: True if root port suspend status changed
899 * @flags.b.port_over_current_change: True if root port over current state
900 * changed.
901 * @flags.b.port_l1_change: True if root port l1 status changed
902 * @flags.b.reserved: Reserved bits of root port register
903 * @non_periodic_sched_inactive: Inactive QHs in the non-periodic schedule.
904 * Transfers associated with these QHs are not currently
905 * assigned to a host channel.
906 * @non_periodic_sched_active: Active QHs in the non-periodic schedule.
907 * Transfers associated with these QHs are currently
908 * assigned to a host channel.
909 * @non_periodic_qh_ptr: Pointer to next QH to process in the active
910 * non-periodic schedule
911 * @non_periodic_sched_waiting: Waiting QHs in the non-periodic schedule.
912 * Transfers associated with these QHs are not currently
913 * assigned to a host channel.
914 * @periodic_sched_inactive: Inactive QHs in the periodic schedule. This is a
915 * list of QHs for periodic transfers that are _not_
916 * scheduled for the next frame. Each QH in the list has an
917 * interval counter that determines when it needs to be
918 * scheduled for execution. This scheduling mechanism
919 * allows only a simple calculation for periodic bandwidth
920 * used (i.e. must assume that all periodic transfers may
921 * need to execute in the same frame). However, it greatly
922 * simplifies scheduling and should be sufficient for the
923 * vast majority of OTG hosts, which need to connect to a
924 * small number of peripherals at one time. Items move from
925 * this list to periodic_sched_ready when the QH interval
926 * counter is 0 at SOF.
927 * @periodic_sched_ready: List of periodic QHs that are ready for execution in
928 * the next frame, but have not yet been assigned to host
929 * channels. Items move from this list to
930 * periodic_sched_assigned as host channels become
931 * available during the current frame.
932 * @periodic_sched_assigned: List of periodic QHs to be executed in the next
933 * frame that are assigned to host channels. Items move
934 * from this list to periodic_sched_queued as the
935 * transactions for the QH are queued to the DWC_otg
936 * controller.
937 * @periodic_sched_queued: List of periodic QHs that have been queued for
938 * execution. Items move from this list to either
939 * periodic_sched_inactive or periodic_sched_ready when the
940 * channel associated with the transfer is released. If the
941 * interval for the QH is 1, the item moves to
942 * periodic_sched_ready because it must be rescheduled for
943 * the next frame. Otherwise, the item moves to
944 * periodic_sched_inactive.
945 * @split_order: List keeping track of channels doing splits, in order.
946 * @periodic_usecs: Total bandwidth claimed so far for periodic transfers.
947 * This value is in microseconds per (micro)frame. The
948 * assumption is that all periodic transfers may occur in
949 * the same (micro)frame.
950 * @hs_periodic_bitmap: Bitmap used by the microframe scheduler any time the
951 * host is in high speed mode; low speed schedules are
952 * stored elsewhere since we need one per TT.
953 * @periodic_qh_count: Count of periodic QHs, if using several eps. Used for
954 * SOF enable/disable.
955 * @free_hc_list: Free host channels in the controller. This is a list of
956 * struct dwc2_host_chan items.
957 * @periodic_channels: Number of host channels assigned to periodic transfers.
958 * Currently assuming that there is a dedicated host
959 * channel for each periodic transaction and at least one
960 * host channel is available for non-periodic transactions.
961 * @non_periodic_channels: Number of host channels assigned to non-periodic
962 * transfers
963 * @available_host_channels: Number of host channels available for the
964 * microframe scheduler to use
965 * @hc_ptr_array: Array of pointers to the host channel descriptors.
966 * Allows accessing a host channel descriptor given the
967 * host channel number. This is useful in interrupt
968 * handlers.
969 * @status_buf: Buffer used for data received during the status phase of
970 * a control transfer.
971 * @status_buf_dma: DMA address for status_buf
972 * @start_work: Delayed work for handling host A-cable connection
973 * @reset_work: Delayed work for handling a port reset
974 * @phy_reset_work: Work structure for doing a PHY reset
975 * @otg_port: OTG port number
976 * @frame_list: Frame list
977 * @frame_list_dma: Frame list DMA address
978 * @frame_list_sz: Frame list size
979 * @desc_gen_cache: Kmem cache for generic descriptors
980 * @desc_hsisoc_cache: Kmem cache for hs isochronous descriptors
981 * @unaligned_cache: Kmem cache for DMA mode to handle non-aligned buf
982 *
983 * These are for peripheral mode:
984 *
985 * @driver: USB gadget driver
986 * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
987 * @num_of_eps: Number of available EPs (excluding EP0)
988 * @debug_root: Root directrory for debugfs.
989 * @ep0_reply: Request used for ep0 reply.
990 * @ep0_buff: Buffer for EP0 reply data, if needed.
991 * @ctrl_buff: Buffer for EP0 control requests.
992 * @ctrl_req: Request for EP0 control packets.
993 * @ep0_state: EP0 control transfers state
994 * @delayed_status: true when gadget driver asks for delayed status
995 * @test_mode: USB test mode requested by the host
996 * @remote_wakeup_allowed: True if device is allowed to wake-up host by
997 * remote-wakeup signalling
998 * @setup_desc_dma: EP0 setup stage desc chain DMA address
999 * @setup_desc: EP0 setup stage desc chain pointer
1000 * @ctrl_in_desc_dma: EP0 IN data phase desc chain DMA address
1001 * @ctrl_in_desc: EP0 IN data phase desc chain pointer
1002 * @ctrl_out_desc_dma: EP0 OUT data phase desc chain DMA address
1003 * @ctrl_out_desc: EP0 OUT data phase desc chain pointer
1004 * @irq: Interrupt request line number
1005 * @clk: Pointer to otg clock
1006 * @reset: Pointer to dwc2 reset controller
1007 * @reset_ecc: Pointer to dwc2 optional reset controller in Stratix10.
1008 * @regset: A pointer to a struct debugfs_regset32, which contains
1009 * a pointer to an array of register definitions, the
1010 * array size and the base address where the register bank
1011 * is to be found.
1012 * @last_frame_num: Number of last frame. Range from 0 to 32768
1013 * @frame_num_array: Used only if CONFIG_USB_DWC2_TRACK_MISSED_SOFS is
1014 * defined, for missed SOFs tracking. Array holds that
1015 * frame numbers, which not equal to last_frame_num +1
1016 * @last_frame_num_array: Used only if CONFIG_USB_DWC2_TRACK_MISSED_SOFS is
1017 * defined, for missed SOFs tracking.
1018 * If current_frame_number != last_frame_num+1
1019 * then last_frame_num added to this array
1020 * @frame_num_idx: Actual size of frame_num_array and last_frame_num_array
1021 * @dumped_frame_num_array: 1 - if missed SOFs frame numbers dumbed
1022 * 0 - if missed SOFs frame numbers not dumbed
1023 * @fifo_mem: Total internal RAM for FIFOs (bytes)
1024 * @fifo_map: Each bit intend for concrete fifo. If that bit is set,
1025 * then that fifo is used
1026 * @gadget: Represents a usb gadget device
1027 * @connected: Used in slave mode. True if device connected with host
1028 * @eps_in: The IN endpoints being supplied to the gadget framework
1029 * @eps_out: The OUT endpoints being supplied to the gadget framework
1030 * @new_connection: Used in host mode. True if there are new connected
1031 * device
1032 * @enabled: Indicates the enabling state of controller
1033 *
1034 */
1035 struct dwc2_hsotg {
1036 struct device *dev;
1037 void __iomem *regs;
1038 /** Params detected from hardware */
1039 struct dwc2_hw_params hw_params;
1040 /** Params to actually use */
1041 struct dwc2_core_params params;
1042 enum usb_otg_state op_state;
1043 enum usb_dr_mode dr_mode;
1044 struct usb_role_switch *role_sw;
1045 enum usb_dr_mode role_sw_default_mode;
1046 unsigned int hcd_enabled:1;
1047 unsigned int gadget_enabled:1;
1048 unsigned int ll_hw_enabled:1;
1049 unsigned int hibernated:1;
1050 unsigned int in_ppd:1;
1051 bool bus_suspended;
1052 unsigned int reset_phy_on_wake:1;
1053 unsigned int need_phy_for_wake:1;
1054 unsigned int phy_off_for_suspend:1;
1055 u16 frame_number;
1056
1057 struct phy *phy;
1058 struct usb_phy *uphy;
1059 struct dwc2_hsotg_plat *plat;
1060 struct regulator_bulk_data supplies[DWC2_NUM_SUPPLIES];
1061 struct regulator *vbus_supply;
1062 struct regulator *usb33d;
1063
1064 spinlock_t lock;
1065 void *priv;
1066 int irq;
1067 struct clk *clk;
1068 struct reset_control *reset;
1069 struct reset_control *reset_ecc;
1070
1071 unsigned int queuing_high_bandwidth:1;
1072 unsigned int srp_success:1;
1073
1074 struct workqueue_struct *wq_otg;
1075 struct work_struct wf_otg;
1076 struct timer_list wkp_timer;
1077 enum dwc2_lx_state lx_state;
1078 struct dwc2_gregs_backup gr_backup;
1079 struct dwc2_dregs_backup dr_backup;
1080 struct dwc2_hregs_backup hr_backup;
1081
1082 struct dentry *debug_root;
1083 struct debugfs_regset32 *regset;
1084 bool needs_byte_swap;
1085
1086 /* DWC OTG HW Release versions */
1087 #define DWC2_CORE_REV_2_71a 0x4f54271a
1088 #define DWC2_CORE_REV_2_72a 0x4f54272a
1089 #define DWC2_CORE_REV_2_80a 0x4f54280a
1090 #define DWC2_CORE_REV_2_90a 0x4f54290a
1091 #define DWC2_CORE_REV_2_91a 0x4f54291a
1092 #define DWC2_CORE_REV_2_92a 0x4f54292a
1093 #define DWC2_CORE_REV_2_94a 0x4f54294a
1094 #define DWC2_CORE_REV_3_00a 0x4f54300a
1095 #define DWC2_CORE_REV_3_10a 0x4f54310a
1096 #define DWC2_CORE_REV_4_00a 0x4f54400a
1097 #define DWC2_CORE_REV_4_20a 0x4f54420a
1098 #define DWC2_FS_IOT_REV_1_00a 0x5531100a
1099 #define DWC2_HS_IOT_REV_1_00a 0x5532100a
1100 #define DWC2_CORE_REV_MASK 0x0000ffff
1101
1102 /* DWC OTG HW Core ID */
1103 #define DWC2_OTG_ID 0x4f540000
1104 #define DWC2_FS_IOT_ID 0x55310000
1105 #define DWC2_HS_IOT_ID 0x55320000
1106
1107 #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
1108 union dwc2_hcd_internal_flags {
1109 u32 d32;
1110 struct {
1111 unsigned port_connect_status_change:1;
1112 unsigned port_connect_status:1;
1113 unsigned port_reset_change:1;
1114 unsigned port_enable_change:1;
1115 unsigned port_suspend_change:1;
1116 unsigned port_over_current_change:1;
1117 unsigned port_l1_change:1;
1118 unsigned reserved:25;
1119 } b;
1120 } flags;
1121
1122 struct list_head non_periodic_sched_inactive;
1123 struct list_head non_periodic_sched_waiting;
1124 struct list_head non_periodic_sched_active;
1125 struct list_head *non_periodic_qh_ptr;
1126 struct list_head periodic_sched_inactive;
1127 struct list_head periodic_sched_ready;
1128 struct list_head periodic_sched_assigned;
1129 struct list_head periodic_sched_queued;
1130 struct list_head split_order;
1131 u16 periodic_usecs;
1132 DECLARE_BITMAP(hs_periodic_bitmap, DWC2_HS_SCHEDULE_US);
1133 u16 periodic_qh_count;
1134 bool new_connection;
1135
1136 u16 last_frame_num;
1137
1138 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
1139 #define FRAME_NUM_ARRAY_SIZE 1000
1140 u16 *frame_num_array;
1141 u16 *last_frame_num_array;
1142 int frame_num_idx;
1143 int dumped_frame_num_array;
1144 #endif
1145
1146 struct list_head free_hc_list;
1147 int periodic_channels;
1148 int non_periodic_channels;
1149 int available_host_channels;
1150 struct dwc2_host_chan *hc_ptr_array[MAX_EPS_CHANNELS];
1151 u8 *status_buf;
1152 dma_addr_t status_buf_dma;
1153 #define DWC2_HCD_STATUS_BUF_SIZE 64
1154
1155 struct delayed_work start_work;
1156 struct delayed_work reset_work;
1157 struct work_struct phy_reset_work;
1158 u8 otg_port;
1159 u32 *frame_list;
1160 dma_addr_t frame_list_dma;
1161 u32 frame_list_sz;
1162 struct kmem_cache *desc_gen_cache;
1163 struct kmem_cache *desc_hsisoc_cache;
1164 struct kmem_cache *unaligned_cache;
1165 #define DWC2_KMEM_UNALIGNED_BUF_SIZE 1024
1166
1167 #endif /* CONFIG_USB_DWC2_HOST || CONFIG_USB_DWC2_DUAL_ROLE */
1168
1169 #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
1170 IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
1171 /* Gadget structures */
1172 struct usb_gadget_driver *driver;
1173 int fifo_mem;
1174 unsigned int dedicated_fifos:1;
1175 unsigned char num_of_eps;
1176 u32 fifo_map;
1177
1178 struct usb_request *ep0_reply;
1179 struct usb_request *ctrl_req;
1180 void *ep0_buff;
1181 void *ctrl_buff;
1182 enum dwc2_ep0_state ep0_state;
1183 unsigned delayed_status : 1;
1184 u8 test_mode;
1185
1186 dma_addr_t setup_desc_dma[2];
1187 struct dwc2_dma_desc *setup_desc[2];
1188 dma_addr_t ctrl_in_desc_dma;
1189 struct dwc2_dma_desc *ctrl_in_desc;
1190 dma_addr_t ctrl_out_desc_dma;
1191 struct dwc2_dma_desc *ctrl_out_desc;
1192
1193 struct usb_gadget gadget;
1194 unsigned int enabled:1;
1195 unsigned int connected:1;
1196 unsigned int remote_wakeup_allowed:1;
1197 struct dwc2_hsotg_ep *eps_in[MAX_EPS_CHANNELS];
1198 struct dwc2_hsotg_ep *eps_out[MAX_EPS_CHANNELS];
1199 #endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
1200 };
1201
1202 /* Normal architectures just use readl/write */
dwc2_readl(struct dwc2_hsotg * hsotg,u32 offset)1203 static inline u32 dwc2_readl(struct dwc2_hsotg *hsotg, u32 offset)
1204 {
1205 u32 val;
1206
1207 val = readl(hsotg->regs + offset);
1208 if (hsotg->needs_byte_swap)
1209 return swab32(val);
1210 else
1211 return val;
1212 }
1213
dwc2_writel(struct dwc2_hsotg * hsotg,u32 value,u32 offset)1214 static inline void dwc2_writel(struct dwc2_hsotg *hsotg, u32 value, u32 offset)
1215 {
1216 if (hsotg->needs_byte_swap)
1217 writel(swab32(value), hsotg->regs + offset);
1218 else
1219 writel(value, hsotg->regs + offset);
1220
1221 #ifdef DWC2_LOG_WRITES
1222 pr_info("info:: wrote %08x to %p\n", value, hsotg->regs + offset);
1223 #endif
1224 }
1225
dwc2_readl_rep(struct dwc2_hsotg * hsotg,u32 offset,void * buffer,unsigned int count)1226 static inline void dwc2_readl_rep(struct dwc2_hsotg *hsotg, u32 offset,
1227 void *buffer, unsigned int count)
1228 {
1229 if (count) {
1230 u32 *buf = buffer;
1231
1232 do {
1233 u32 x = dwc2_readl(hsotg, offset);
1234 *buf++ = x;
1235 } while (--count);
1236 }
1237 }
1238
dwc2_writel_rep(struct dwc2_hsotg * hsotg,u32 offset,const void * buffer,unsigned int count)1239 static inline void dwc2_writel_rep(struct dwc2_hsotg *hsotg, u32 offset,
1240 const void *buffer, unsigned int count)
1241 {
1242 if (count) {
1243 const u32 *buf = buffer;
1244
1245 do {
1246 dwc2_writel(hsotg, *buf++, offset);
1247 } while (--count);
1248 }
1249 }
1250
1251 /* Reasons for halting a host channel */
1252 enum dwc2_halt_status {
1253 DWC2_HC_XFER_NO_HALT_STATUS,
1254 DWC2_HC_XFER_COMPLETE,
1255 DWC2_HC_XFER_URB_COMPLETE,
1256 DWC2_HC_XFER_ACK,
1257 DWC2_HC_XFER_NAK,
1258 DWC2_HC_XFER_NYET,
1259 DWC2_HC_XFER_STALL,
1260 DWC2_HC_XFER_XACT_ERR,
1261 DWC2_HC_XFER_FRAME_OVERRUN,
1262 DWC2_HC_XFER_BABBLE_ERR,
1263 DWC2_HC_XFER_DATA_TOGGLE_ERR,
1264 DWC2_HC_XFER_AHB_ERR,
1265 DWC2_HC_XFER_PERIODIC_INCOMPLETE,
1266 DWC2_HC_XFER_URB_DEQUEUE,
1267 };
1268
1269 /* Core version information */
dwc2_is_iot(struct dwc2_hsotg * hsotg)1270 static inline bool dwc2_is_iot(struct dwc2_hsotg *hsotg)
1271 {
1272 return (hsotg->hw_params.snpsid & 0xfff00000) == 0x55300000;
1273 }
1274
dwc2_is_fs_iot(struct dwc2_hsotg * hsotg)1275 static inline bool dwc2_is_fs_iot(struct dwc2_hsotg *hsotg)
1276 {
1277 return (hsotg->hw_params.snpsid & 0xffff0000) == 0x55310000;
1278 }
1279
dwc2_is_hs_iot(struct dwc2_hsotg * hsotg)1280 static inline bool dwc2_is_hs_iot(struct dwc2_hsotg *hsotg)
1281 {
1282 return (hsotg->hw_params.snpsid & 0xffff0000) == 0x55320000;
1283 }
1284
1285 /*
1286 * The following functions support initialization of the core driver component
1287 * and the DWC_otg controller
1288 */
1289 int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait);
1290 int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg);
1291 int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, int rem_wakeup,
1292 bool restore);
1293 int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host);
1294 int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
1295 int reset, int is_host);
1296 void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg);
1297 int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy);
1298
1299 void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host);
1300 void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg);
1301
1302 bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg);
1303
1304 int dwc2_check_core_version(struct dwc2_hsotg *hsotg);
1305
1306 /*
1307 * Common core Functions.
1308 * The following functions support managing the DWC_otg controller in either
1309 * device or host mode.
1310 */
1311 void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes);
1312 void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num);
1313 void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg);
1314
1315 void dwc2_enable_global_interrupts(struct dwc2_hsotg *hcd);
1316 void dwc2_disable_global_interrupts(struct dwc2_hsotg *hcd);
1317
1318 void dwc2_hib_restore_common(struct dwc2_hsotg *hsotg, int rem_wakeup,
1319 int is_host);
1320 int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg);
1321 int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg);
1322
1323 void dwc2_enable_acg(struct dwc2_hsotg *hsotg);
1324
1325 /* This function should be called on every hardware interrupt. */
1326 irqreturn_t dwc2_handle_common_intr(int irq, void *dev);
1327
1328 /* The device ID match table */
1329 extern const struct of_device_id dwc2_of_match_table[];
1330 extern const struct acpi_device_id dwc2_acpi_match[];
1331
1332 int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg);
1333 int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg);
1334
1335 /* Common polling functions */
1336 int dwc2_hsotg_wait_bit_set(struct dwc2_hsotg *hs_otg, u32 reg, u32 bit,
1337 u32 timeout);
1338 int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hs_otg, u32 reg, u32 bit,
1339 u32 timeout);
1340 /* Parameters */
1341 int dwc2_get_hwparams(struct dwc2_hsotg *hsotg);
1342 int dwc2_init_params(struct dwc2_hsotg *hsotg);
1343
1344 /*
1345 * The following functions check the controller's OTG operation mode
1346 * capability (GHWCFG2.OTG_MODE).
1347 *
1348 * These functions can be used before the internal hsotg->hw_params
1349 * are read in and cached so they always read directly from the
1350 * GHWCFG2 register.
1351 */
1352 unsigned int dwc2_op_mode(struct dwc2_hsotg *hsotg);
1353 bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg);
1354 bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg);
1355 bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg);
1356
1357 /*
1358 * Returns the mode of operation, host or device
1359 */
dwc2_is_host_mode(struct dwc2_hsotg * hsotg)1360 static inline int dwc2_is_host_mode(struct dwc2_hsotg *hsotg)
1361 {
1362 return (dwc2_readl(hsotg, GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
1363 }
1364
dwc2_is_device_mode(struct dwc2_hsotg * hsotg)1365 static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg)
1366 {
1367 return (dwc2_readl(hsotg, GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
1368 }
1369
1370 int dwc2_drd_init(struct dwc2_hsotg *hsotg);
1371 void dwc2_drd_suspend(struct dwc2_hsotg *hsotg);
1372 void dwc2_drd_resume(struct dwc2_hsotg *hsotg);
1373 void dwc2_drd_exit(struct dwc2_hsotg *hsotg);
1374
1375 /*
1376 * Dump core registers and SPRAM
1377 */
1378 void dwc2_dump_dev_registers(struct dwc2_hsotg *hsotg);
1379 void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg);
1380 void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg);
1381
1382 /* Gadget defines */
1383 #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
1384 IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
1385 int dwc2_hsotg_remove(struct dwc2_hsotg *hsotg);
1386 int dwc2_hsotg_suspend(struct dwc2_hsotg *dwc2);
1387 int dwc2_hsotg_resume(struct dwc2_hsotg *dwc2);
1388 int dwc2_gadget_init(struct dwc2_hsotg *hsotg);
1389 void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
1390 bool reset);
1391 void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg);
1392 void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg);
1393 void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2);
1394 int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode);
1395 #define dwc2_is_device_connected(hsotg) (hsotg->connected)
1396 #define dwc2_is_device_enabled(hsotg) (hsotg->enabled)
1397 int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg);
1398 int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg, int remote_wakeup);
1399 int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg);
1400 int dwc2_gadget_exit_hibernation(struct dwc2_hsotg *hsotg,
1401 int rem_wakeup, int reset);
1402 int dwc2_gadget_enter_partial_power_down(struct dwc2_hsotg *hsotg);
1403 int dwc2_gadget_exit_partial_power_down(struct dwc2_hsotg *hsotg,
1404 bool restore);
1405 void dwc2_gadget_enter_clock_gating(struct dwc2_hsotg *hsotg);
1406 void dwc2_gadget_exit_clock_gating(struct dwc2_hsotg *hsotg,
1407 int rem_wakeup);
1408 int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg);
1409 int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg);
1410 int dwc2_hsotg_tx_fifo_average_depth(struct dwc2_hsotg *hsotg);
1411 void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg);
1412 void dwc2_gadget_program_ref_clk(struct dwc2_hsotg *hsotg);
dwc2_clear_fifo_map(struct dwc2_hsotg * hsotg)1413 static inline void dwc2_clear_fifo_map(struct dwc2_hsotg *hsotg)
1414 { hsotg->fifo_map = 0; }
1415 #else
dwc2_hsotg_remove(struct dwc2_hsotg * dwc2)1416 static inline int dwc2_hsotg_remove(struct dwc2_hsotg *dwc2)
1417 { return 0; }
dwc2_hsotg_suspend(struct dwc2_hsotg * dwc2)1418 static inline int dwc2_hsotg_suspend(struct dwc2_hsotg *dwc2)
1419 { return 0; }
dwc2_hsotg_resume(struct dwc2_hsotg * dwc2)1420 static inline int dwc2_hsotg_resume(struct dwc2_hsotg *dwc2)
1421 { return 0; }
dwc2_gadget_init(struct dwc2_hsotg * hsotg)1422 static inline int dwc2_gadget_init(struct dwc2_hsotg *hsotg)
1423 { return 0; }
dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg * dwc2,bool reset)1424 static inline void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
1425 bool reset) {}
dwc2_hsotg_core_disconnect(struct dwc2_hsotg * hsotg)1426 static inline void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg) {}
dwc2_hsotg_core_connect(struct dwc2_hsotg * hsotg)1427 static inline void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg) {}
dwc2_hsotg_disconnect(struct dwc2_hsotg * dwc2)1428 static inline void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2) {}
dwc2_hsotg_set_test_mode(struct dwc2_hsotg * hsotg,int testmode)1429 static inline int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg,
1430 int testmode)
1431 { return 0; }
1432 #define dwc2_is_device_connected(hsotg) (0)
1433 #define dwc2_is_device_enabled(hsotg) (0)
dwc2_backup_device_registers(struct dwc2_hsotg * hsotg)1434 static inline int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg)
1435 { return 0; }
dwc2_restore_device_registers(struct dwc2_hsotg * hsotg,int remote_wakeup)1436 static inline int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg,
1437 int remote_wakeup)
1438 { return 0; }
dwc2_gadget_enter_hibernation(struct dwc2_hsotg * hsotg)1439 static inline int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg)
1440 { return 0; }
dwc2_gadget_exit_hibernation(struct dwc2_hsotg * hsotg,int rem_wakeup,int reset)1441 static inline int dwc2_gadget_exit_hibernation(struct dwc2_hsotg *hsotg,
1442 int rem_wakeup, int reset)
1443 { return 0; }
dwc2_gadget_enter_partial_power_down(struct dwc2_hsotg * hsotg)1444 static inline int dwc2_gadget_enter_partial_power_down(struct dwc2_hsotg *hsotg)
1445 { return 0; }
dwc2_gadget_exit_partial_power_down(struct dwc2_hsotg * hsotg,bool restore)1446 static inline int dwc2_gadget_exit_partial_power_down(struct dwc2_hsotg *hsotg,
1447 bool restore)
1448 { return 0; }
dwc2_gadget_enter_clock_gating(struct dwc2_hsotg * hsotg)1449 static inline void dwc2_gadget_enter_clock_gating(struct dwc2_hsotg *hsotg) {}
dwc2_gadget_exit_clock_gating(struct dwc2_hsotg * hsotg,int rem_wakeup)1450 static inline void dwc2_gadget_exit_clock_gating(struct dwc2_hsotg *hsotg,
1451 int rem_wakeup) {}
dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg * hsotg)1452 static inline int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg)
1453 { return 0; }
dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg * hsotg)1454 static inline int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg)
1455 { return 0; }
dwc2_hsotg_tx_fifo_average_depth(struct dwc2_hsotg * hsotg)1456 static inline int dwc2_hsotg_tx_fifo_average_depth(struct dwc2_hsotg *hsotg)
1457 { return 0; }
dwc2_gadget_init_lpm(struct dwc2_hsotg * hsotg)1458 static inline void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg) {}
dwc2_gadget_program_ref_clk(struct dwc2_hsotg * hsotg)1459 static inline void dwc2_gadget_program_ref_clk(struct dwc2_hsotg *hsotg) {}
dwc2_clear_fifo_map(struct dwc2_hsotg * hsotg)1460 static inline void dwc2_clear_fifo_map(struct dwc2_hsotg *hsotg) {}
1461 #endif
1462
1463 #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
1464 int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg);
1465 int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg, int us);
1466 void dwc2_hcd_connect(struct dwc2_hsotg *hsotg);
1467 void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force);
1468 void dwc2_hcd_start(struct dwc2_hsotg *hsotg);
1469 int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup);
1470 int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex);
1471 int dwc2_port_resume(struct dwc2_hsotg *hsotg);
1472 int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg);
1473 int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg);
1474 int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg);
1475 int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg,
1476 int rem_wakeup, int reset);
1477 int dwc2_host_enter_partial_power_down(struct dwc2_hsotg *hsotg);
1478 int dwc2_host_exit_partial_power_down(struct dwc2_hsotg *hsotg,
1479 int rem_wakeup, bool restore);
1480 void dwc2_host_enter_clock_gating(struct dwc2_hsotg *hsotg);
1481 void dwc2_host_exit_clock_gating(struct dwc2_hsotg *hsotg, int rem_wakeup);
1482 bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2);
dwc2_host_schedule_phy_reset(struct dwc2_hsotg * hsotg)1483 static inline void dwc2_host_schedule_phy_reset(struct dwc2_hsotg *hsotg)
1484 { schedule_work(&hsotg->phy_reset_work); }
1485 #else
dwc2_hcd_get_frame_number(struct dwc2_hsotg * hsotg)1486 static inline int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
1487 { return 0; }
dwc2_hcd_get_future_frame_number(struct dwc2_hsotg * hsotg,int us)1488 static inline int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg,
1489 int us)
1490 { return 0; }
dwc2_hcd_connect(struct dwc2_hsotg * hsotg)1491 static inline void dwc2_hcd_connect(struct dwc2_hsotg *hsotg) {}
dwc2_hcd_disconnect(struct dwc2_hsotg * hsotg,bool force)1492 static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force) {}
dwc2_hcd_start(struct dwc2_hsotg * hsotg)1493 static inline void dwc2_hcd_start(struct dwc2_hsotg *hsotg) {}
dwc2_hcd_remove(struct dwc2_hsotg * hsotg)1494 static inline void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) {}
dwc2_core_init(struct dwc2_hsotg * hsotg,bool initial_setup)1495 static inline int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)
1496 { return 0; }
dwc2_port_suspend(struct dwc2_hsotg * hsotg,u16 windex)1497 static inline int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
1498 { return 0; }
dwc2_port_resume(struct dwc2_hsotg * hsotg)1499 static inline int dwc2_port_resume(struct dwc2_hsotg *hsotg)
1500 { return 0; }
dwc2_hcd_init(struct dwc2_hsotg * hsotg)1501 static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
1502 { return 0; }
dwc2_backup_host_registers(struct dwc2_hsotg * hsotg)1503 static inline int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
1504 { return 0; }
dwc2_restore_host_registers(struct dwc2_hsotg * hsotg)1505 static inline int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg)
1506 { return 0; }
dwc2_host_enter_hibernation(struct dwc2_hsotg * hsotg)1507 static inline int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg)
1508 { return 0; }
dwc2_host_exit_hibernation(struct dwc2_hsotg * hsotg,int rem_wakeup,int reset)1509 static inline int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg,
1510 int rem_wakeup, int reset)
1511 { return 0; }
dwc2_host_enter_partial_power_down(struct dwc2_hsotg * hsotg)1512 static inline int dwc2_host_enter_partial_power_down(struct dwc2_hsotg *hsotg)
1513 { return 0; }
dwc2_host_exit_partial_power_down(struct dwc2_hsotg * hsotg,int rem_wakeup,bool restore)1514 static inline int dwc2_host_exit_partial_power_down(struct dwc2_hsotg *hsotg,
1515 int rem_wakeup, bool restore)
1516 { return 0; }
dwc2_host_enter_clock_gating(struct dwc2_hsotg * hsotg)1517 static inline void dwc2_host_enter_clock_gating(struct dwc2_hsotg *hsotg) {}
dwc2_host_exit_clock_gating(struct dwc2_hsotg * hsotg,int rem_wakeup)1518 static inline void dwc2_host_exit_clock_gating(struct dwc2_hsotg *hsotg,
1519 int rem_wakeup) {}
dwc2_host_can_poweroff_phy(struct dwc2_hsotg * dwc2)1520 static inline bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2)
1521 { return false; }
dwc2_host_schedule_phy_reset(struct dwc2_hsotg * hsotg)1522 static inline void dwc2_host_schedule_phy_reset(struct dwc2_hsotg *hsotg) {}
1523
1524 #endif
1525
1526 #endif /* __DWC2_CORE_H__ */
1527