1 /* 2 Madge Ambassador ATM Adapter driver. 3 Copyright (C) 1995-1999 Madge Networks Ltd. 4 5 This program is free software; you can redistribute it and/or modify 6 it under the terms of the GNU General Public License as published by 7 the Free Software Foundation; either version 2 of the License, or 8 (at your option) any later version. 9 10 This program is distributed in the hope that it will be useful, 11 but WITHOUT ANY WARRANTY; without even the implied warranty of 12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 GNU General Public License for more details. 14 15 You should have received a copy of the GNU General Public License 16 along with this program; if not, write to the Free Software 17 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 18 19 The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian 20 system and in the file COPYING in the Linux kernel source. 21 */ 22 23 #ifndef AMBASSADOR_H 24 #define AMBASSADOR_H 25 26 27 #ifdef CONFIG_ATM_AMBASSADOR_DEBUG 28 #define DEBUG_AMBASSADOR 29 #endif 30 31 #define DEV_LABEL "amb" 32 33 #ifndef PCI_VENDOR_ID_MADGE 34 #define PCI_VENDOR_ID_MADGE 0x10B6 35 #endif 36 #ifndef PCI_VENDOR_ID_MADGE_AMBASSADOR 37 #define PCI_DEVICE_ID_MADGE_AMBASSADOR 0x1001 38 #endif 39 #ifndef PCI_VENDOR_ID_MADGE_AMBASSADOR_BAD 40 #define PCI_DEVICE_ID_MADGE_AMBASSADOR_BAD 0x1002 41 #endif 42 43 // diagnostic output 44 45 #define PRINTK(severity,format,args...) \ 46 printk(severity DEV_LABEL ": " format "\n" , ## args) 47 48 #ifdef DEBUG_AMBASSADOR 49 50 #define DBG_ERR 0x0001 51 #define DBG_WARN 0x0002 52 #define DBG_INFO 0x0004 53 #define DBG_INIT 0x0008 54 #define DBG_LOAD 0x0010 55 #define DBG_VCC 0x0020 56 #define DBG_QOS 0x0040 57 #define DBG_CMD 0x0080 58 #define DBG_TX 0x0100 59 #define DBG_RX 0x0200 60 #define DBG_SKB 0x0400 61 #define DBG_POOL 0x0800 62 #define DBG_IRQ 0x1000 63 #define DBG_FLOW 0x2000 64 #define DBG_REGS 0x4000 65 #define DBG_DATA 0x8000 66 #define DBG_MASK 0xffff 67 68 /* the ## prevents the annoying double expansion of the macro arguments */ 69 /* KERN_INFO is used since KERN_DEBUG often does not make it to the console */ 70 #define PRINTDB(bits,format,args...) \ 71 ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 ) 72 #define PRINTDM(bits,format,args...) \ 73 ( (debug & (bits)) ? printk (format , ## args) : 1 ) 74 #define PRINTDE(bits,format,args...) \ 75 ( (debug & (bits)) ? printk (format "\n" , ## args) : 1 ) 76 #define PRINTD(bits,format,args...) \ 77 ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 ) 78 79 #else 80 81 #define PRINTD(bits,format,args...) 82 #define PRINTDB(bits,format,args...) 83 #define PRINTDM(bits,format,args...) 84 #define PRINTDE(bits,format,args...) 85 86 #endif 87 88 #define PRINTDD(bits,format,args...) 89 #define PRINTDDB(sec,fmt,args...) 90 #define PRINTDDM(sec,fmt,args...) 91 #define PRINTDDE(sec,fmt,args...) 92 93 // tunable values (?) 94 95 /* MUST be powers of two -- why ? */ 96 #define COM_Q_ENTRIES 8 97 #define TX_Q_ENTRIES 32 98 #define RX_Q_ENTRIES 64 99 100 // fixed values 101 102 // guessing 103 #define AMB_EXTENT 0x80 104 105 // Minimum allowed size for an Ambassador queue 106 #define MIN_QUEUE_SIZE 2 107 108 // Ambassador microcode allows 1 to 4 pools, we use 4 (simpler) 109 #define NUM_RX_POOLS 4 110 111 // minimum RX buffers required to cope with replenishing delay 112 #define MIN_RX_BUFFERS 1 113 114 // minimum PCI latency we will tolerate (32 IS TOO SMALL) 115 #define MIN_PCI_LATENCY 64 // 255 116 117 // VCs supported by card (VPI always 0) 118 #define NUM_VPI_BITS 0 119 #define NUM_VCI_BITS 10 120 #define NUM_VCS 1024 121 122 /* The status field bits defined so far. */ 123 #define RX_ERR 0x8000 // always present if there is an error (hmm) 124 #define CRC_ERR 0x4000 // AAL5 CRC error 125 #define LEN_ERR 0x2000 // overlength frame 126 #define ABORT_ERR 0x1000 // zero length field in received frame 127 #define UNUSED_ERR 0x0800 // buffer returned unused 128 129 // Adaptor commands 130 131 #define SRB_OPEN_VC 0 132 /* par_0: dwordswap(VC_number) */ 133 /* par_1: dwordswap(flags<<16) or wordswap(flags)*/ 134 /* flags: */ 135 136 /* LANE: 0x0004 */ 137 /* NOT_UBR: 0x0008 */ 138 /* ABR: 0x0010 */ 139 140 /* RxPool0: 0x0000 */ 141 /* RxPool1: 0x0020 */ 142 /* RxPool2: 0x0040 */ 143 /* RxPool3: 0x0060 */ 144 145 /* par_2: dwordswap(fp_rate<<16) or wordswap(fp_rate) */ 146 147 #define SRB_CLOSE_VC 1 148 /* par_0: dwordswap(VC_number) */ 149 150 #define SRB_GET_BIA 2 151 /* returns */ 152 /* par_0: dwordswap(half BIA) */ 153 /* par_1: dwordswap(half BIA) */ 154 155 #define SRB_GET_SUNI_STATS 3 156 /* par_0: dwordswap(physical_host_address) */ 157 158 #define SRB_SET_BITS_8 4 159 #define SRB_SET_BITS_16 5 160 #define SRB_SET_BITS_32 6 161 #define SRB_CLEAR_BITS_8 7 162 #define SRB_CLEAR_BITS_16 8 163 #define SRB_CLEAR_BITS_32 9 164 /* par_0: dwordswap(ATMizer address) */ 165 /* par_1: dwordswap(mask) */ 166 167 #define SRB_SET_8 10 168 #define SRB_SET_16 11 169 #define SRB_SET_32 12 170 /* par_0: dwordswap(ATMizer address) */ 171 /* par_1: dwordswap(data) */ 172 173 #define SRB_GET_32 13 174 /* par_0: dwordswap(ATMizer address) */ 175 /* returns */ 176 /* par_1: dwordswap(ATMizer data) */ 177 178 #define SRB_GET_VERSION 14 179 /* returns */ 180 /* par_0: dwordswap(Major Version) */ 181 /* par_1: dwordswap(Minor Version) */ 182 183 #define SRB_FLUSH_BUFFER_Q 15 184 /* Only flags to define which buffer pool; all others must be zero */ 185 /* par_0: dwordswap(flags<<16) or wordswap(flags)*/ 186 187 #define SRB_GET_DMA_SPEEDS 16 188 /* returns */ 189 /* par_0: dwordswap(Read speed (bytes/sec)) */ 190 /* par_1: dwordswap(Write speed (bytes/sec)) */ 191 192 #define SRB_MODIFY_VC_RATE 17 193 /* par_0: dwordswap(VC_number) */ 194 /* par_1: dwordswap(fp_rate<<16) or wordswap(fp_rate) */ 195 196 #define SRB_MODIFY_VC_FLAGS 18 197 /* par_0: dwordswap(VC_number) */ 198 /* par_1: dwordswap(flags<<16) or wordswap(flags)*/ 199 200 /* flags: */ 201 202 /* LANE: 0x0004 */ 203 /* NOT_UBR: 0x0008 */ 204 /* ABR: 0x0010 */ 205 206 /* RxPool0: 0x0000 */ 207 /* RxPool1: 0x0020 */ 208 /* RxPool2: 0x0040 */ 209 /* RxPool3: 0x0060 */ 210 211 #define SRB_RATE_SHIFT 16 212 #define SRB_POOL_SHIFT (SRB_FLAGS_SHIFT+5) 213 #define SRB_FLAGS_SHIFT 16 214 215 #define SRB_STOP_TASKING 19 216 #define SRB_START_TASKING 20 217 #define SRB_SHUT_DOWN 21 218 #define MAX_SRB 21 219 220 #define SRB_COMPLETE 0xffffffff 221 222 #define TX_FRAME 0x80000000 223 224 // number of types of SRB MUST be a power of two -- why? 225 #define NUM_OF_SRB 32 226 227 // number of bits of period info for rate 228 #define MAX_RATE_BITS 6 229 230 #define TX_UBR 0x0000 231 #define TX_UBR_CAPPED 0x0008 232 #define TX_ABR 0x0018 233 #define TX_FRAME_NOTCAP 0x0000 234 #define TX_FRAME_CAPPED 0x8000 235 236 #define FP_155_RATE 0x24b1 237 #define FP_25_RATE 0x1f9d 238 239 /* #define VERSION_NUMBER 0x01000000 // initial release */ 240 /* #define VERSION_NUMBER 0x01010000 // fixed startup probs PLX MB0 not cleared */ 241 /* #define VERSION_NUMBER 0x01020000 // changed SUNI reset timings; allowed r/w onchip */ 242 243 /* #define VERSION_NUMBER 0x01030000 // clear local doorbell int reg on reset */ 244 /* #define VERSION_NUMBER 0x01040000 // PLX bug work around version PLUS */ 245 /* remove race conditions on basic interface */ 246 /* indicate to the host that diagnostics */ 247 /* have finished; if failed, how and what */ 248 /* failed */ 249 /* fix host memory test to fix PLX bug */ 250 /* allow flash upgrade and BIA upgrade directly */ 251 /* */ 252 #define VERSION_NUMBER 0x01050025 /* Jason's first hacked version. */ 253 /* Change in download algorithm */ 254 255 #define DMA_VALID 0xb728e149 /* completely random */ 256 257 #define FLASH_BASE 0xa0c00000 258 #define FLASH_SIZE 0x00020000 /* 128K */ 259 #define BIA_BASE (FLASH_BASE+0x0001c000) /* Flash Sector 7 */ 260 #define BIA_ADDRESS ((void *)0xa0c1c000) 261 #define PLX_BASE 0xe0000000 262 263 typedef enum { 264 host_memory_test = 1, 265 read_adapter_memory, 266 write_adapter_memory, 267 adapter_start, 268 get_version_number, 269 interrupt_host, 270 flash_erase_sector, 271 adap_download_block = 0x20, 272 adap_erase_flash, 273 adap_run_in_iram, 274 adap_end_download 275 } loader_command; 276 277 #define BAD_COMMAND (-1) 278 #define COMMAND_IN_PROGRESS 1 279 #define COMMAND_PASSED_TEST 2 280 #define COMMAND_FAILED_TEST 3 281 #define COMMAND_READ_DATA_OK 4 282 #define COMMAND_READ_BAD_ADDRESS 5 283 #define COMMAND_WRITE_DATA_OK 6 284 #define COMMAND_WRITE_BAD_ADDRESS 7 285 #define COMMAND_WRITE_FLASH_FAILURE 8 286 #define COMMAND_COMPLETE 9 287 #define COMMAND_FLASH_ERASE_FAILURE 10 288 #define COMMAND_WRITE_BAD_DATA 11 289 290 /* bit fields for mailbox[0] return values */ 291 292 #define GPINT_TST_FAILURE 0x00000001 293 #define SUNI_DATA_PATTERN_FAILURE 0x00000002 294 #define SUNI_DATA_BITS_FAILURE 0x00000004 295 #define SUNI_UTOPIA_FAILURE 0x00000008 296 #define SUNI_FIFO_FAILURE 0x00000010 297 #define SRAM_FAILURE 0x00000020 298 #define SELF_TEST_FAILURE 0x0000003f 299 300 /* mailbox[1] = 0 in progress, -1 on completion */ 301 /* mailbox[2] = current test 00 00 test(8 bit) phase(8 bit) */ 302 /* mailbox[3] = last failure, 00 00 test(8 bit) phase(8 bit) */ 303 /* mailbox[4],mailbox[5],mailbox[6] random failure values */ 304 305 /* PLX/etc. memory map including command structure */ 306 307 /* These registers may also be memory mapped in PCI memory */ 308 309 #define UNUSED_LOADER_MAILBOXES 6 310 311 typedef struct { 312 u32 stuff[16]; 313 union { 314 struct { 315 u32 result; 316 u32 ready; 317 u32 stuff[UNUSED_LOADER_MAILBOXES]; 318 } loader; 319 struct { 320 u32 cmd_address; 321 u32 tx_address; 322 u32 rx_address[NUM_RX_POOLS]; 323 u32 gen_counter; 324 u32 spare; 325 } adapter; 326 } mb; 327 u32 doorbell; 328 u32 interrupt; 329 u32 interrupt_control; 330 u32 reset_control; 331 } amb_mem; 332 333 /* RESET bit, IRQ (card to host) and doorbell (host to card) enable bits */ 334 #define AMB_RESET_BITS 0x40000000 335 #define AMB_INTERRUPT_BITS 0x00000300 336 #define AMB_DOORBELL_BITS 0x00030000 337 338 /* loader commands */ 339 340 #define MAX_COMMAND_DATA 13 341 #define MAX_TRANSFER_DATA 11 342 343 typedef struct { 344 __be32 address; 345 __be32 count; 346 __be32 data[MAX_TRANSFER_DATA]; 347 } transfer_block; 348 349 typedef struct { 350 __be32 result; 351 __be32 command; 352 union { 353 transfer_block transfer; 354 __be32 version; 355 __be32 start; 356 __be32 data[MAX_COMMAND_DATA]; 357 } payload; 358 __be32 valid; 359 } loader_block; 360 361 /* command queue */ 362 363 /* Again all data are BIG ENDIAN */ 364 365 typedef struct { 366 union { 367 struct { 368 __be32 vc; 369 __be32 flags; 370 __be32 rate; 371 } open; 372 struct { 373 __be32 vc; 374 __be32 rate; 375 } modify_rate; 376 struct { 377 __be32 vc; 378 __be32 flags; 379 } modify_flags; 380 struct { 381 __be32 vc; 382 } close; 383 struct { 384 __be32 lower4; 385 __be32 upper2; 386 } bia; 387 struct { 388 __be32 address; 389 } suni; 390 struct { 391 __be32 major; 392 __be32 minor; 393 } version; 394 struct { 395 __be32 read; 396 __be32 write; 397 } speed; 398 struct { 399 __be32 flags; 400 } flush; 401 struct { 402 __be32 address; 403 __be32 data; 404 } memory; 405 __be32 par[3]; 406 } args; 407 __be32 request; 408 } command; 409 410 /* transmit queues and associated structures */ 411 412 /* The hosts transmit structure. All BIG ENDIAN; host address 413 restricted to first 1GByte, but address passed to the card must 414 have the top MS bit or'ed in. -- check this */ 415 416 /* TX is described by 1+ tx_frags followed by a tx_frag_end */ 417 418 typedef struct { 419 __be32 bytes; 420 __be32 address; 421 } tx_frag; 422 423 /* apart from handle the fields here are for the adapter to play with 424 and should be set to zero */ 425 426 typedef struct { 427 u32 handle; 428 u16 vc; 429 u16 next_descriptor_length; 430 u32 next_descriptor; 431 #ifdef AMB_NEW_MICROCODE 432 u8 cpcs_uu; 433 u8 cpi; 434 u16 pad; 435 #endif 436 } tx_frag_end; 437 438 typedef struct { 439 tx_frag tx_frag; 440 tx_frag_end tx_frag_end; 441 struct sk_buff * skb; 442 } tx_simple; 443 444 #if 0 445 typedef union { 446 tx_frag fragment; 447 tx_frag_end end_of_list; 448 } tx_descr; 449 #endif 450 451 /* this "points" to the sequence of fragments and trailer */ 452 453 typedef struct { 454 __be16 vc; 455 __be16 tx_descr_length; 456 __be32 tx_descr_addr; 457 } tx_in; 458 459 /* handle is the handle from tx_in */ 460 461 typedef struct { 462 u32 handle; 463 } tx_out; 464 465 /* receive frame structure */ 466 467 /* All BIG ENDIAN; handle is as passed from host; length is zero for 468 aborted frames, and frames with errors. Header is actually VC 469 number, lec-id is NOT yet supported. */ 470 471 typedef struct { 472 u32 handle; 473 __be16 vc; 474 __be16 lec_id; // unused 475 __be16 status; 476 __be16 length; 477 } rx_out; 478 479 /* buffer supply structure */ 480 481 typedef struct { 482 u32 handle; 483 __be32 host_address; 484 } rx_in; 485 486 /* This first structure is the area in host memory where the adapter 487 writes its pointer values. These pointer values are BIG ENDIAN and 488 reside in the same 4MB 'page' as this structure. The host gives the 489 adapter the address of this block by sending a doorbell interrupt 490 to the adapter after downloading the code and setting it going. The 491 addresses have the top 10 bits set to 1010000010b -- really? 492 493 The host must initialise these before handing the block to the 494 adapter. */ 495 496 typedef struct { 497 __be32 command_start; /* SRB commands completions */ 498 __be32 command_end; /* SRB commands completions */ 499 __be32 tx_start; 500 __be32 tx_end; 501 __be32 txcom_start; /* tx completions */ 502 __be32 txcom_end; /* tx completions */ 503 struct { 504 __be32 buffer_start; 505 __be32 buffer_end; 506 u32 buffer_q_get; 507 u32 buffer_q_end; 508 u32 buffer_aptr; 509 __be32 rx_start; /* rx completions */ 510 __be32 rx_end; 511 u32 rx_ptr; 512 __be32 buffer_size; /* size of host buffer */ 513 } rec_struct[NUM_RX_POOLS]; 514 #ifdef AMB_NEW_MICROCODE 515 u16 init_flags; 516 u16 talk_block_spare; 517 #endif 518 } adap_talk_block; 519 520 /* This structure must be kept in line with the vcr image in sarmain.h 521 522 This is the structure in the host filled in by the adapter by 523 GET_SUNI_STATS */ 524 525 typedef struct { 526 u8 racp_chcs; 527 u8 racp_uhcs; 528 u16 spare; 529 u32 racp_rcell; 530 u32 tacp_tcell; 531 u32 flags; 532 u32 dropped_cells; 533 u32 dropped_frames; 534 } suni_stats; 535 536 typedef enum { 537 dead 538 } amb_flags; 539 540 #define NEXTQ(current,start,limit) \ 541 ( (current)+1 < (limit) ? (current)+1 : (start) ) 542 543 typedef struct { 544 command * start; 545 command * in; 546 command * out; 547 command * limit; 548 } amb_cq_ptrs; 549 550 typedef struct { 551 spinlock_t lock; 552 unsigned int pending; 553 unsigned int high; 554 unsigned int filled; 555 unsigned int maximum; // size - 1 (q implementation) 556 amb_cq_ptrs ptrs; 557 } amb_cq; 558 559 typedef struct { 560 spinlock_t lock; 561 unsigned int pending; 562 unsigned int high; 563 unsigned int filled; 564 unsigned int maximum; // size - 1 (q implementation) 565 struct { 566 tx_in * start; 567 tx_in * ptr; 568 tx_in * limit; 569 } in; 570 struct { 571 tx_out * start; 572 tx_out * ptr; 573 tx_out * limit; 574 } out; 575 } amb_txq; 576 577 typedef struct { 578 spinlock_t lock; 579 unsigned int pending; 580 unsigned int low; 581 unsigned int emptied; 582 unsigned int maximum; // size - 1 (q implementation) 583 struct { 584 rx_in * start; 585 rx_in * ptr; 586 rx_in * limit; 587 } in; 588 struct { 589 rx_out * start; 590 rx_out * ptr; 591 rx_out * limit; 592 } out; 593 unsigned int buffers_wanted; 594 unsigned int buffer_size; 595 } amb_rxq; 596 597 typedef struct { 598 unsigned long tx_ok; 599 struct { 600 unsigned long ok; 601 unsigned long error; 602 unsigned long badcrc; 603 unsigned long toolong; 604 unsigned long aborted; 605 unsigned long unused; 606 } rx; 607 } amb_stats; 608 609 // a single struct pointed to by atm_vcc->dev_data 610 611 typedef struct { 612 u8 tx_vc_bits:7; 613 u8 tx_present:1; 614 } amb_tx_info; 615 616 typedef struct { 617 unsigned char pool; 618 } amb_rx_info; 619 620 typedef struct { 621 amb_rx_info rx_info; 622 u16 tx_frame_bits; 623 unsigned int tx_rate; 624 unsigned int rx_rate; 625 } amb_vcc; 626 627 struct amb_dev { 628 u8 irq; 629 unsigned long flags; 630 u32 iobase; 631 u32 * membase; 632 633 amb_cq cq; 634 amb_txq txq; 635 amb_rxq rxq[NUM_RX_POOLS]; 636 637 struct mutex vcc_sf; 638 amb_tx_info txer[NUM_VCS]; 639 struct atm_vcc * rxer[NUM_VCS]; 640 unsigned int tx_avail; 641 unsigned int rx_avail; 642 643 amb_stats stats; 644 645 struct atm_dev * atm_dev; 646 struct pci_dev * pci_dev; 647 struct timer_list housekeeping; 648 }; 649 650 typedef struct amb_dev amb_dev; 651 652 #define AMB_DEV(atm_dev) ((amb_dev *) (atm_dev)->dev_data) 653 #define AMB_VCC(atm_vcc) ((amb_vcc *) (atm_vcc)->dev_data) 654 655 /* rate rounding */ 656 657 typedef enum { 658 round_up, 659 round_down, 660 round_nearest 661 } rounding; 662 663 #endif 664