1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
4 // video capture devices
5 //
6 // Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
7 // Markus Rechberger <mrechberger@gmail.com>
8 // Mauro Carvalho Chehab <mchehab@kernel.org>
9 // Sascha Sommer <saschasommer@freenet.de>
10 // Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com>
11
12 #include "em28xx.h"
13
14 #include <linux/init.h>
15 #include <linux/module.h>
16 #include <linux/slab.h>
17 #include <linux/delay.h>
18 #include <linux/i2c.h>
19 #include <linux/usb.h>
20 #include <media/tuner.h>
21 #include <media/drv-intf/msp3400.h>
22 #include <media/i2c/saa7115.h>
23 #include <dt-bindings/media/tvp5150.h>
24 #include <media/i2c/tvaudio.h>
25 #include <media/tveeprom.h>
26 #include <media/v4l2-common.h>
27 #include <sound/ac97_codec.h>
28
29 #define DRIVER_NAME "em28xx"
30
31 static int tuner = -1;
32 module_param(tuner, int, 0444);
33 MODULE_PARM_DESC(tuner, "tuner type");
34
35 static unsigned int disable_ir;
36 module_param(disable_ir, int, 0444);
37 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
38
39 static unsigned int disable_usb_speed_check;
40 module_param(disable_usb_speed_check, int, 0444);
41 MODULE_PARM_DESC(disable_usb_speed_check,
42 "override min bandwidth requirement of 480M bps");
43
44 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
45 module_param_array(card, int, NULL, 0444);
46 MODULE_PARM_DESC(card, "card type");
47
48 static int usb_xfer_mode = -1;
49 module_param(usb_xfer_mode, int, 0444);
50 MODULE_PARM_DESC(usb_xfer_mode,
51 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)");
52
53 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
54 static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS);
55
56 struct em28xx_hash_table {
57 unsigned long hash;
58 unsigned int model;
59 unsigned int tuner;
60 };
61
62 static void em28xx_pre_card_setup(struct em28xx *dev);
63
64 /*
65 * Reset sequences for analog/digital modes
66 */
67
68 /* Reset for the most [analog] boards */
69 static const struct em28xx_reg_seq default_analog[] = {
70 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
71 { -1, -1, -1, -1},
72 };
73
74 /* Reset for the most [digital] boards */
75 static const struct em28xx_reg_seq default_digital[] = {
76 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
77 { -1, -1, -1, -1},
78 };
79
80 /* Board :Zolid Hybrid Tv Stick */
81 static struct em28xx_reg_seq zolid_tuner[] = {
82 {EM2820_R08_GPIO_CTRL, 0xfd, 0xff, 100},
83 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 100},
84 { -1, -1, -1, -1},
85 };
86
87 static struct em28xx_reg_seq zolid_digital[] = {
88 {EM2820_R08_GPIO_CTRL, 0x6a, 0xff, 100},
89 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 100},
90 {EM2880_R04_GPO, 0x04, 0xff, 100},
91 {EM2880_R04_GPO, 0x0c, 0xff, 100},
92 { -1, -1, -1, -1},
93 };
94
95 /* Board Hauppauge WinTV HVR 900 analog */
96 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
97 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10},
98 { 0x05, 0xff, 0x10, 10},
99 { -1, -1, -1, -1},
100 };
101
102 /* Board Hauppauge WinTV HVR 900 digital */
103 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
104 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
105 {EM2880_R04_GPO, 0x04, 0x0f, 10},
106 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
107 { -1, -1, -1, -1},
108 };
109
110 /* Board Hauppauge WinTV HVR 900 (R2) digital */
111 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
112 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
113 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
114 { -1, -1, -1, -1},
115 };
116
117 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
118 static const struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
119 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10},
120 { -1, -1, -1, -1},
121 };
122
123 /* Board - EM2882 Kworld 315U digital */
124 static const struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
125 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
126 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
127 {EM2880_R04_GPO, 0x04, 0xff, 10},
128 {EM2880_R04_GPO, 0x0c, 0xff, 10},
129 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10},
130 { -1, -1, -1, -1},
131 };
132
133 static const struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
134 {EM2880_R04_GPO, 0x08, 0xff, 10},
135 {EM2880_R04_GPO, 0x0c, 0xff, 10},
136 {EM2880_R04_GPO, 0x08, 0xff, 10},
137 {EM2880_R04_GPO, 0x0c, 0xff, 10},
138 { -1, -1, -1, -1},
139 };
140
141 static const struct em28xx_reg_seq kworld_330u_analog[] = {
142 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
143 {EM2880_R04_GPO, 0x00, 0xff, 10},
144 { -1, -1, -1, -1},
145 };
146
147 static const struct em28xx_reg_seq kworld_330u_digital[] = {
148 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
149 {EM2880_R04_GPO, 0x08, 0xff, 10},
150 { -1, -1, -1, -1},
151 };
152
153 /*
154 * Evga inDtube
155 * GPIO0 - Enable digital power (s5h1409) - low to enable
156 * GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
157 * GPIO4 - xc3028 reset
158 * GOP3 - s5h1409 reset
159 */
160 static const struct em28xx_reg_seq evga_indtube_analog[] = {
161 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60},
162 { -1, -1, -1, -1},
163 };
164
165 static const struct em28xx_reg_seq evga_indtube_digital[] = {
166 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1},
167 {EM2880_R04_GPO, 0x04, 0xff, 10},
168 {EM2880_R04_GPO, 0x0c, 0xff, 1},
169 { -1, -1, -1, -1},
170 };
171
172 /*
173 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map:
174 * EM_GPIO_0 - currently unknown
175 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
176 * EM_GPIO_2 - currently unknown
177 * EM_GPIO_3 - currently unknown
178 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
179 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
180 * EM_GPIO_6 - currently unknown
181 * EM_GPIO_7 - currently unknown
182 */
183 static const struct em28xx_reg_seq kworld_a340_digital[] = {
184 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
185 { -1, -1, -1, -1},
186 };
187
188 static const struct em28xx_reg_seq kworld_ub435q_v3_digital[] = {
189 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
190 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
191 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100},
192 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
193 { -1, -1, -1, -1},
194 };
195
196 /* Pinnacle Hybrid Pro eb1a:2881 */
197 static const struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
198 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10},
199 { -1, -1, -1, -1},
200 };
201
202 static const struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
203 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
204 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
205 {EM2880_R04_GPO, 0x0c, 0xff, 1},
206 { -1, -1, -1, -1},
207 };
208
209 static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
210 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
211 {EM2880_R04_GPO, 0x00, 0xff, 10},
212 { -1, -1, -1, -1},
213 };
214
215 static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
216 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
217 {EM2880_R04_GPO, 0x08, 0xff, 10},
218 { -1, -1, -1, -1},
219 };
220
221 /*
222 * PCTV HD Mini (80e) GPIOs
223 * 0-5: not used
224 * 6: demod reset, active low
225 * 7: LED on, active high
226 */
227 static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = {
228 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
229 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/
230 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10},
231 { -1, -1, -1, -1},
232 };
233
234 /*
235 * eb1a:2868 Reddo DVB-C USB TV Box
236 * GPIO4 - CU1216L NIM
237 * Other GPIOs seems to be don't care.
238 */
239 static const struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
240 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
241 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10},
242 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
243 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
244 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10},
245 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10},
246 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
247 { -1, -1, -1, -1},
248 };
249
250 /* Callback for the most boards */
251 static const struct em28xx_reg_seq default_tuner_gpio[] = {
252 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
253 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10},
254 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
255 { -1, -1, -1, -1},
256 };
257
258 /* Mute/unmute */
259 static const struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
260 {EM2820_R08_GPIO_CTRL, 5, 7, 10},
261 { -1, -1, -1, -1},
262 };
263
264 static const struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
265 {EM2820_R08_GPIO_CTRL, 4, 7, 10},
266 { -1, -1, -1, -1},
267 };
268
269 static const struct em28xx_reg_seq compro_mute_gpio[] = {
270 {EM2820_R08_GPIO_CTRL, 6, 7, 10},
271 { -1, -1, -1, -1},
272 };
273
274 /* Terratec AV350 */
275 static const struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
276 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10},
277 { -1, -1, -1, -1},
278 };
279
280 static const struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
281 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
282 { -1, -1, -1, -1},
283 };
284
285 static const struct em28xx_reg_seq silvercrest_reg_seq[] = {
286 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
287 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10},
288 { -1, -1, -1, -1},
289 };
290
291 static const struct em28xx_reg_seq vc211a_enable[] = {
292 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10},
293 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10},
294 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10},
295 { -1, -1, -1, -1},
296 };
297
298 static const struct em28xx_reg_seq dikom_dk300_digital[] = {
299 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
300 {EM2880_R04_GPO, 0x08, 0xff, 10},
301 { -1, -1, -1, -1},
302 };
303
304 /* Reset for the most [digital] boards */
305 static const struct em28xx_reg_seq leadership_digital[] = {
306 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10},
307 { -1, -1, -1, -1},
308 };
309
310 static const struct em28xx_reg_seq leadership_reset[] = {
311 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
312 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10},
313 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
314 { -1, -1, -1, -1},
315 };
316
317 /*
318 * 2013:024f PCTV nanoStick T2 290e
319 * GPIO_6 - demod reset
320 * GPIO_7 - LED
321 */
322 static const struct em28xx_reg_seq pctv_290e[] = {
323 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80},
324 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
325 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
326 { -1, -1, -1, -1},
327 };
328
329 #if 0
330 static const struct em28xx_reg_seq terratec_h5_gpio[] = {
331 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
332 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
333 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50},
334 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50},
335 { -1, -1, -1, -1},
336 };
337
338 static const struct em28xx_reg_seq terratec_h5_digital[] = {
339 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
340 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
341 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
342 { -1, -1, -1, -1},
343 };
344 #endif
345
346 /*
347 * 2013:024f PCTV DVB-S2 Stick 460e
348 * GPIO_0 - POWER_ON
349 * GPIO_1 - BOOST
350 * GPIO_2 - VUV_LNB (red LED)
351 * GPIO_3 - EXT_12V
352 * GPIO_4 - INT_DEM (DEMOD GPIO_0)
353 * GPIO_5 - INT_LNB
354 * GPIO_6 - RESET_DEM
355 * GPIO_7 - LED (green LED)
356 */
357 static const struct em28xx_reg_seq pctv_460e[] = {
358 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50},
359 { 0x0d, 0xff, 0xff, 50},
360 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */
361 { 0x0d, 0x42, 0xff, 50},
362 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */
363 { -1, -1, -1, -1},
364 };
365
366 static const struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
367 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
368 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */
369 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35},
370 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
371 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
372 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10},
373 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10},
374 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20},
375 { -1, -1, -1, -1},
376 };
377
378 /*
379 * 2013:0258 PCTV DVB-S2 Stick (461e)
380 * GPIO 0 = POWER_ON
381 * GPIO 1 = BOOST
382 * GPIO 2 = VUV_LNB (red LED)
383 * GPIO 3 = #EXT_12V
384 * GPIO 4 = INT_DEM
385 * GPIO 5 = INT_LNB
386 * GPIO 6 = #RESET_DEM
387 * GPIO 7 = P07_LED (green LED)
388 */
389 static const struct em28xx_reg_seq pctv_461e[] = {
390 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0},
391 {0x0d, 0xff, 0xff, 0},
392 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */
393 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */
394 {0x0d, 0x42, 0xff, 0},
395 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0},
396 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */
397 { -1, -1, -1, -1},
398 };
399
400 #if 0
401 static const struct em28xx_reg_seq hauppauge_930c_gpio[] = {
402 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
403 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */
404 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
405 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10},
406 { -1, -1, -1, -1},
407 };
408
409 static const struct em28xx_reg_seq hauppauge_930c_digital[] = {
410 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
411 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
412 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
413 { -1, -1, -1, -1},
414 };
415 #endif
416
417 /*
418 * 1b80:e425 MaxMedia UB425-TC
419 * 1b80:e1cc Delock 61959
420 * GPIO_6 - demod reset, 0=active
421 * GPIO_7 - LED, 0=active
422 */
423 static const struct em28xx_reg_seq maxmedia_ub425_tc[] = {
424 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100},
425 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
426 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
427 { -1, -1, -1, -1},
428 };
429
430 /*
431 * 2304:0242 PCTV QuatroStick (510e)
432 * GPIO_2: decoder reset, 0=active
433 * GPIO_4: decoder suspend, 0=active
434 * GPIO_6: demod reset, 0=active
435 * GPIO_7: LED, 1=active
436 */
437 static const struct em28xx_reg_seq pctv_510e[] = {
438 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
439 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
440 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
441 { -1, -1, -1, -1},
442 };
443
444 /*
445 * 2013:0251 PCTV QuatroStick nano (520e)
446 * GPIO_2: decoder reset, 0=active
447 * GPIO_4: decoder suspend, 0=active
448 * GPIO_6: demod reset, 0=active
449 * GPIO_7: LED, 1=active
450 */
451 static const struct em28xx_reg_seq pctv_520e[] = {
452 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
453 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
454 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
455 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
456 { -1, -1, -1, -1},
457 };
458
459 /*
460 * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
461 * reg 0x80/0x84:
462 * GPIO_0: capturing LED, 0=on, 1=off
463 * GPIO_2: AV mute button, 0=pressed, 1=unpressed
464 * GPIO 3: illumination button, 0=pressed, 1=unpressed
465 * GPIO_6: illumination/flash LED, 0=on, 1=off
466 * reg 0x81/0x85:
467 * GPIO_7: snapshot button, 0=pressed, 1=unpressed
468 */
469 static const struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = {
470 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10},
471 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10},
472 { -1, -1, -1, -1},
473 };
474
475 static const struct em28xx_reg_seq pctv_292e[] = {
476 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
477 {0x0d, 0xff, 0xff, 950},
478 {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100},
479 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410},
480 {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300},
481 {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60},
482 {0x0d, 0x42, 0xff, 50},
483 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
484 {-1, -1, -1, -1},
485 };
486
487 static const struct em28xx_reg_seq terratec_t2_stick_hd[] = {
488 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
489 {0x0d, 0xff, 0xff, 600},
490 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
491 {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100},
492 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100},
493 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300},
494 {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100},
495 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300},
496 {0x0d, 0x42, 0xff, 1000},
497 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
498 {-1, -1, -1, -1},
499 };
500
501 static const struct em28xx_reg_seq plex_px_bcud[] = {
502 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
503 {0x0d, 0xff, 0xff, 0},
504 {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0},
505 {EM28XX_R06_I2C_CLK, 0x40, 0xff, 0},
506 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100},
507 {EM28XX_R12_VINENABLE, 0x20, 0x20, 0},
508 {0x0d, 0x42, 0xff, 1000},
509 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
510 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
511 {0x73, 0xfd, 0xff, 100},
512 {-1, -1, -1, -1},
513 };
514
515 /*
516 * 2040:0265 Hauppauge WinTV-dualHD DVB Isoc
517 * 2040:8265 Hauppauge WinTV-dualHD DVB Bulk
518 * 2040:026d Hauppauge WinTV-dualHD ATSC/QAM Isoc
519 * 2040:826d Hauppauge WinTV-dualHD ATSC/QAM Bulk
520 * reg 0x80/0x84:
521 * GPIO_0: Yellow LED tuner 1, 0=on, 1=off
522 * GPIO_1: Green LED tuner 1, 0=on, 1=off
523 * GPIO_2: Yellow LED tuner 2, 0=on, 1=off
524 * GPIO_3: Green LED tuner 2, 0=on, 1=off
525 * GPIO_5: Reset #2, 0=active
526 * GPIO_6: Reset #1, 0=active
527 */
528 static const struct em28xx_reg_seq hauppauge_dualhd_dvb[] = {
529 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
530 {0x0d, 0xff, 0xff, 200},
531 {0x50, 0x04, 0xff, 300},
532 {EM2874_R80_GPIO_P0_CTRL, 0xbf, 0xff, 100}, /* demod 1 reset */
533 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
534 {EM2874_R80_GPIO_P0_CTRL, 0xdf, 0xff, 100}, /* demod 2 reset */
535 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
536 {EM2874_R5F_TS_ENABLE, 0x00, 0xff, 50}, /* disable TS filters */
537 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50},
538 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50},
539 {-1, -1, -1, -1},
540 };
541
542 /* Hauppauge USB QuadHD */
543 static struct em28xx_reg_seq hauppauge_usb_quadhd_atsc_reg_seq[] = {
544 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
545 {0x0d, 0xff, 0xff, 200},
546 {0x50, 0x04, 0xff, 300},
547 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xf0, 100}, /* demod 1 reset */
548 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xf0, 100},
549 {EM2874_R80_GPIO_P0_CTRL, 0xd0, 0xf0, 100}, /* demod 2 reset */
550 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xf0, 100},
551 {EM2874_R5F_TS_ENABLE, 0x44, 0xff, 50},
552 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50},
553 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50},
554 {-1, -1, -1, -1},
555 };
556
557 /*
558 * Button definitions
559 */
560 static const struct em28xx_button std_snapshot_button[] = {
561 {
562 .role = EM28XX_BUTTON_SNAPSHOT,
563 .reg_r = EM28XX_R0C_USBSUSP,
564 .reg_clearing = EM28XX_R0C_USBSUSP,
565 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT,
566 .inverted = 0,
567 },
568 {-1, 0, 0, 0, 0},
569 };
570
571 static const struct em28xx_button speedlink_vad_laplace_buttons[] = {
572 {
573 .role = EM28XX_BUTTON_SNAPSHOT,
574 .reg_r = EM2874_R85_GPIO_P1_STATE,
575 .mask = 0x80,
576 .inverted = 1,
577 },
578 {
579 .role = EM28XX_BUTTON_ILLUMINATION,
580 .reg_r = EM2874_R84_GPIO_P0_STATE,
581 .mask = 0x08,
582 .inverted = 1,
583 },
584 {-1, 0, 0, 0, 0},
585 };
586
587 /*
588 * LED definitions
589 */
590 static struct em28xx_led speedlink_vad_laplace_leds[] = {
591 {
592 .role = EM28XX_LED_ANALOG_CAPTURING,
593 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
594 .gpio_mask = 0x01,
595 .inverted = 1,
596 },
597 {
598 .role = EM28XX_LED_ILLUMINATION,
599 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
600 .gpio_mask = 0x40,
601 .inverted = 1,
602 },
603 {-1, 0, 0, 0},
604 };
605
606 static struct em28xx_led kworld_ub435q_v3_leds[] = {
607 {
608 .role = EM28XX_LED_DIGITAL_CAPTURING,
609 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
610 .gpio_mask = 0x80,
611 .inverted = 1,
612 },
613 {-1, 0, 0, 0},
614 };
615
616 static struct em28xx_led pctv_80e_leds[] = {
617 {
618 .role = EM28XX_LED_DIGITAL_CAPTURING,
619 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
620 .gpio_mask = 0x80,
621 .inverted = 0,
622 },
623 {-1, 0, 0, 0},
624 };
625
626 static struct em28xx_led terratec_grabby_leds[] = {
627 {
628 .role = EM28XX_LED_ANALOG_CAPTURING,
629 .gpio_reg = EM2820_R08_GPIO_CTRL,
630 .gpio_mask = EM_GPIO_3,
631 .inverted = 1,
632 },
633 {-1, 0, 0, 0},
634 };
635
636 static struct em28xx_led hauppauge_dualhd_leds[] = {
637 {
638 .role = EM28XX_LED_DIGITAL_CAPTURING,
639 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
640 .gpio_mask = EM_GPIO_1,
641 .inverted = 1,
642 },
643 {
644 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2,
645 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
646 .gpio_mask = EM_GPIO_3,
647 .inverted = 1,
648 },
649 {-1, 0, 0, 0},
650 };
651
652 static struct em28xx_led hauppauge_usb_quadhd_leds[] = {
653 {
654 .role = EM28XX_LED_DIGITAL_CAPTURING,
655 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
656 .gpio_mask = EM_GPIO_2,
657 .inverted = 1,
658 },
659 {
660 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2,
661 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
662 .gpio_mask = EM_GPIO_0,
663 .inverted = 1,
664 },
665 {-1, 0, 0, 0},
666 };
667
668 /*
669 * Board definitions
670 */
671 const struct em28xx_board em28xx_boards[] = {
672 [EM2750_BOARD_UNKNOWN] = {
673 .name = "EM2710/EM2750/EM2751 webcam grabber",
674 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
675 .tuner_type = TUNER_ABSENT,
676 .is_webcam = 1,
677 .input = { {
678 .type = EM28XX_VMUX_COMPOSITE,
679 .vmux = 0,
680 .amux = EM28XX_AMUX_VIDEO,
681 .gpio = silvercrest_reg_seq,
682 } },
683 },
684 [EM2800_BOARD_UNKNOWN] = {
685 .name = "Unknown EM2800 video grabber",
686 .is_em2800 = 1,
687 .tda9887_conf = TDA9887_PRESENT,
688 .decoder = EM28XX_SAA711X,
689 .tuner_type = TUNER_ABSENT,
690 .input = { {
691 .type = EM28XX_VMUX_COMPOSITE,
692 .vmux = SAA7115_COMPOSITE0,
693 .amux = EM28XX_AMUX_LINE_IN,
694 }, {
695 .type = EM28XX_VMUX_SVIDEO,
696 .vmux = SAA7115_SVIDEO3,
697 .amux = EM28XX_AMUX_LINE_IN,
698 } },
699 },
700 [EM2820_BOARD_UNKNOWN] = {
701 .name = "Unknown EM2750/28xx video grabber",
702 .tuner_type = TUNER_ABSENT,
703 .is_webcam = 1, /* To enable sensor probe */
704 },
705 [EM2882_BOARD_ZOLID_HYBRID_TV_STICK] = {
706 .name = ":ZOLID HYBRID TV STICK",
707 .tuner_type = TUNER_XC2028,
708 .tuner_gpio = zolid_tuner,
709 .decoder = EM28XX_TVP5150,
710 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
711 .mts_firmware = 1,
712 .has_dvb = 1,
713 .dvb_gpio = zolid_digital,
714 },
715 [EM2750_BOARD_DLCW_130] = {
716 /* Beijing Huaqi Information Digital Technology Co., Ltd */
717 .name = "Huaqi DLCW-130",
718 .valid = EM28XX_BOARD_NOT_VALIDATED,
719 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
720 .tuner_type = TUNER_ABSENT,
721 .is_webcam = 1,
722 .input = { {
723 .type = EM28XX_VMUX_COMPOSITE,
724 .vmux = 0,
725 .amux = EM28XX_AMUX_VIDEO,
726 } },
727 },
728 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
729 .name = "Kworld PVR TV 2800 RF",
730 .tuner_type = TUNER_TEMIC_PAL,
731 .tda9887_conf = TDA9887_PRESENT,
732 .decoder = EM28XX_SAA711X,
733 .input = { {
734 .type = EM28XX_VMUX_COMPOSITE,
735 .vmux = SAA7115_COMPOSITE0,
736 .amux = EM28XX_AMUX_LINE_IN,
737 }, {
738 .type = EM28XX_VMUX_SVIDEO,
739 .vmux = SAA7115_SVIDEO3,
740 .amux = EM28XX_AMUX_LINE_IN,
741 } },
742 },
743 [EM2820_BOARD_GADMEI_TVR200] = {
744 .name = "Gadmei TVR200",
745 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
746 .tda9887_conf = TDA9887_PRESENT,
747 .decoder = EM28XX_SAA711X,
748 .input = { {
749 .type = EM28XX_VMUX_TELEVISION,
750 .vmux = SAA7115_COMPOSITE2,
751 .amux = EM28XX_AMUX_LINE_IN,
752 }, {
753 .type = EM28XX_VMUX_COMPOSITE,
754 .vmux = SAA7115_COMPOSITE0,
755 .amux = EM28XX_AMUX_LINE_IN,
756 }, {
757 .type = EM28XX_VMUX_SVIDEO,
758 .vmux = SAA7115_SVIDEO3,
759 .amux = EM28XX_AMUX_LINE_IN,
760 } },
761 },
762 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
763 .name = "Terratec Cinergy 250 USB",
764 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
765 .has_ir_i2c = 1,
766 .tda9887_conf = TDA9887_PRESENT,
767 .decoder = EM28XX_SAA711X,
768 .input = { {
769 .type = EM28XX_VMUX_TELEVISION,
770 .vmux = SAA7115_COMPOSITE2,
771 .amux = EM28XX_AMUX_VIDEO,
772 }, {
773 .type = EM28XX_VMUX_COMPOSITE,
774 .vmux = SAA7115_COMPOSITE0,
775 .amux = EM28XX_AMUX_LINE_IN,
776 }, {
777 .type = EM28XX_VMUX_SVIDEO,
778 .vmux = SAA7115_SVIDEO3,
779 .amux = EM28XX_AMUX_LINE_IN,
780 } },
781 },
782 [EM2820_BOARD_PINNACLE_USB_2] = {
783 .name = "Pinnacle PCTV USB 2",
784 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
785 .has_ir_i2c = 1,
786 .tda9887_conf = TDA9887_PRESENT,
787 .decoder = EM28XX_SAA711X,
788 .input = { {
789 .type = EM28XX_VMUX_TELEVISION,
790 .vmux = SAA7115_COMPOSITE2,
791 .amux = EM28XX_AMUX_VIDEO,
792 }, {
793 .type = EM28XX_VMUX_COMPOSITE,
794 .vmux = SAA7115_COMPOSITE0,
795 .amux = EM28XX_AMUX_LINE_IN,
796 }, {
797 .type = EM28XX_VMUX_SVIDEO,
798 .vmux = SAA7115_SVIDEO3,
799 .amux = EM28XX_AMUX_LINE_IN,
800 } },
801 },
802 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
803 .name = "Hauppauge WinTV USB 2",
804 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
805 .tda9887_conf = TDA9887_PRESENT |
806 TDA9887_PORT1_ACTIVE |
807 TDA9887_PORT2_ACTIVE,
808 .decoder = EM28XX_TVP5150,
809 .has_msp34xx = 1,
810 .has_ir_i2c = 1,
811 .input = { {
812 .type = EM28XX_VMUX_TELEVISION,
813 .vmux = TVP5150_COMPOSITE0,
814 .amux = MSP_INPUT_DEFAULT,
815 }, {
816 .type = EM28XX_VMUX_SVIDEO,
817 .vmux = TVP5150_SVIDEO,
818 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
819 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
820 } },
821 },
822 [EM2820_BOARD_DLINK_USB_TV] = {
823 .name = "D-Link DUB-T210 TV Tuner",
824 .valid = EM28XX_BOARD_NOT_VALIDATED,
825 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
826 .tda9887_conf = TDA9887_PRESENT,
827 .decoder = EM28XX_SAA711X,
828 .input = { {
829 .type = EM28XX_VMUX_TELEVISION,
830 .vmux = SAA7115_COMPOSITE2,
831 .amux = EM28XX_AMUX_LINE_IN,
832 }, {
833 .type = EM28XX_VMUX_COMPOSITE,
834 .vmux = SAA7115_COMPOSITE0,
835 .amux = EM28XX_AMUX_LINE_IN,
836 }, {
837 .type = EM28XX_VMUX_SVIDEO,
838 .vmux = SAA7115_SVIDEO3,
839 .amux = EM28XX_AMUX_LINE_IN,
840 } },
841 },
842 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
843 .name = "Hercules Smart TV USB 2.0",
844 .valid = EM28XX_BOARD_NOT_VALIDATED,
845 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
846 .tda9887_conf = TDA9887_PRESENT,
847 .decoder = EM28XX_SAA711X,
848 .input = { {
849 .type = EM28XX_VMUX_TELEVISION,
850 .vmux = SAA7115_COMPOSITE2,
851 .amux = EM28XX_AMUX_LINE_IN,
852 }, {
853 .type = EM28XX_VMUX_COMPOSITE,
854 .vmux = SAA7115_COMPOSITE0,
855 .amux = EM28XX_AMUX_LINE_IN,
856 }, {
857 .type = EM28XX_VMUX_SVIDEO,
858 .vmux = SAA7115_SVIDEO3,
859 .amux = EM28XX_AMUX_LINE_IN,
860 } },
861 },
862 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
863 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
864 .valid = EM28XX_BOARD_NOT_VALIDATED,
865 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
866 .tda9887_conf = TDA9887_PRESENT,
867 .decoder = EM28XX_SAA711X,
868 .input = { {
869 .type = EM28XX_VMUX_TELEVISION,
870 .vmux = SAA7115_COMPOSITE2,
871 .amux = EM28XX_AMUX_VIDEO,
872 }, {
873 .type = EM28XX_VMUX_COMPOSITE,
874 .vmux = SAA7115_COMPOSITE0,
875 .amux = EM28XX_AMUX_LINE_IN,
876 }, {
877 .type = EM28XX_VMUX_SVIDEO,
878 .vmux = SAA7115_SVIDEO3,
879 .amux = EM28XX_AMUX_LINE_IN,
880 } },
881 },
882 [EM2820_BOARD_GADMEI_UTV310] = {
883 .name = "Gadmei UTV310",
884 .valid = EM28XX_BOARD_NOT_VALIDATED,
885 .tuner_type = TUNER_TNF_5335MF,
886 .tda9887_conf = TDA9887_PRESENT,
887 .decoder = EM28XX_SAA711X,
888 .input = { {
889 .type = EM28XX_VMUX_TELEVISION,
890 .vmux = SAA7115_COMPOSITE1,
891 .amux = EM28XX_AMUX_LINE_IN,
892 }, {
893 .type = EM28XX_VMUX_COMPOSITE,
894 .vmux = SAA7115_COMPOSITE0,
895 .amux = EM28XX_AMUX_LINE_IN,
896 }, {
897 .type = EM28XX_VMUX_SVIDEO,
898 .vmux = SAA7115_SVIDEO3,
899 .amux = EM28XX_AMUX_LINE_IN,
900 } },
901 },
902 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
903 .name = "Leadtek Winfast USB II Deluxe",
904 .valid = EM28XX_BOARD_NOT_VALIDATED,
905 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
906 .has_ir_i2c = 1,
907 .tvaudio_addr = 0x58,
908 .tda9887_conf = TDA9887_PRESENT |
909 TDA9887_PORT2_ACTIVE |
910 TDA9887_QSS,
911 .decoder = EM28XX_SAA711X,
912 .adecoder = EM28XX_TVAUDIO,
913 .input = { {
914 .type = EM28XX_VMUX_TELEVISION,
915 .vmux = SAA7115_COMPOSITE4,
916 .amux = EM28XX_AMUX_AUX,
917 }, {
918 .type = EM28XX_VMUX_COMPOSITE,
919 .vmux = SAA7115_COMPOSITE5,
920 .amux = EM28XX_AMUX_LINE_IN,
921 }, {
922 .type = EM28XX_VMUX_SVIDEO,
923 .vmux = SAA7115_SVIDEO3,
924 .amux = EM28XX_AMUX_LINE_IN,
925 } },
926 .radio = {
927 .type = EM28XX_RADIO,
928 .amux = EM28XX_AMUX_AUX,
929 }
930 },
931 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
932 .name = "Videology 20K14XUSB USB2.0",
933 .valid = EM28XX_BOARD_NOT_VALIDATED,
934 .tuner_type = TUNER_ABSENT,
935 .is_webcam = 1,
936 .input = { {
937 .type = EM28XX_VMUX_COMPOSITE,
938 .vmux = 0,
939 .amux = EM28XX_AMUX_VIDEO,
940 } },
941 },
942 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
943 .name = "Silvercrest Webcam 1.3mpix",
944 .tuner_type = TUNER_ABSENT,
945 .is_webcam = 1,
946 .input = { {
947 .type = EM28XX_VMUX_COMPOSITE,
948 .vmux = 0,
949 .amux = EM28XX_AMUX_VIDEO,
950 .gpio = silvercrest_reg_seq,
951 } },
952 },
953 [EM2821_BOARD_SUPERCOMP_USB_2] = {
954 .name = "Supercomp USB 2.0 TV",
955 .valid = EM28XX_BOARD_NOT_VALIDATED,
956 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
957 .tda9887_conf = TDA9887_PRESENT |
958 TDA9887_PORT1_ACTIVE |
959 TDA9887_PORT2_ACTIVE,
960 .decoder = EM28XX_SAA711X,
961 .input = { {
962 .type = EM28XX_VMUX_TELEVISION,
963 .vmux = SAA7115_COMPOSITE2,
964 .amux = EM28XX_AMUX_LINE_IN,
965 }, {
966 .type = EM28XX_VMUX_COMPOSITE,
967 .vmux = SAA7115_COMPOSITE0,
968 .amux = EM28XX_AMUX_VIDEO,
969 }, {
970 .type = EM28XX_VMUX_SVIDEO,
971 .vmux = SAA7115_SVIDEO3,
972 .amux = EM28XX_AMUX_LINE_IN,
973 } },
974 },
975 [EM2821_BOARD_USBGEAR_VD204] = {
976 .name = "Usbgear VD204v9",
977 .valid = EM28XX_BOARD_NOT_VALIDATED,
978 .tuner_type = TUNER_ABSENT, /* Capture only device */
979 .decoder = EM28XX_SAA711X,
980 .input = { {
981 .type = EM28XX_VMUX_COMPOSITE,
982 .vmux = SAA7115_COMPOSITE0,
983 .amux = EM28XX_AMUX_LINE_IN,
984 }, {
985 .type = EM28XX_VMUX_SVIDEO,
986 .vmux = SAA7115_SVIDEO3,
987 .amux = EM28XX_AMUX_LINE_IN,
988 } },
989 },
990 [EM2860_BOARD_NETGMBH_CAM] = {
991 /* Beijing Huaqi Information Digital Technology Co., Ltd */
992 .name = "NetGMBH Cam",
993 .valid = EM28XX_BOARD_NOT_VALIDATED,
994 .tuner_type = TUNER_ABSENT,
995 .is_webcam = 1,
996 .input = { {
997 .type = EM28XX_VMUX_COMPOSITE,
998 .vmux = 0,
999 .amux = EM28XX_AMUX_VIDEO,
1000 } },
1001 },
1002 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
1003 .name = "Typhoon DVD Maker",
1004 .decoder = EM28XX_SAA711X,
1005 .tuner_type = TUNER_ABSENT, /* Capture only device */
1006 .input = { {
1007 .type = EM28XX_VMUX_COMPOSITE,
1008 .vmux = SAA7115_COMPOSITE0,
1009 .amux = EM28XX_AMUX_LINE_IN,
1010 }, {
1011 .type = EM28XX_VMUX_SVIDEO,
1012 .vmux = SAA7115_SVIDEO3,
1013 .amux = EM28XX_AMUX_LINE_IN,
1014 } },
1015 },
1016 [EM2860_BOARD_GADMEI_UTV330] = {
1017 .name = "Gadmei UTV330",
1018 .valid = EM28XX_BOARD_NOT_VALIDATED,
1019 .tuner_type = TUNER_TNF_5335MF,
1020 .tda9887_conf = TDA9887_PRESENT,
1021 .decoder = EM28XX_SAA711X,
1022 .input = { {
1023 .type = EM28XX_VMUX_TELEVISION,
1024 .vmux = SAA7115_COMPOSITE2,
1025 .amux = EM28XX_AMUX_VIDEO,
1026 }, {
1027 .type = EM28XX_VMUX_COMPOSITE,
1028 .vmux = SAA7115_COMPOSITE0,
1029 .amux = EM28XX_AMUX_LINE_IN,
1030 }, {
1031 .type = EM28XX_VMUX_SVIDEO,
1032 .vmux = SAA7115_SVIDEO3,
1033 .amux = EM28XX_AMUX_LINE_IN,
1034 } },
1035 },
1036 [EM2861_BOARD_GADMEI_UTV330PLUS] = {
1037 .name = "Gadmei UTV330+",
1038 .tuner_type = TUNER_TNF_5335MF,
1039 .tda9887_conf = TDA9887_PRESENT,
1040 .ir_codes = RC_MAP_GADMEI_RM008Z,
1041 .decoder = EM28XX_SAA711X,
1042 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1043 .input = { {
1044 .type = EM28XX_VMUX_TELEVISION,
1045 .vmux = SAA7115_COMPOSITE2,
1046 .amux = EM28XX_AMUX_VIDEO,
1047 }, {
1048 .type = EM28XX_VMUX_COMPOSITE,
1049 .vmux = SAA7115_COMPOSITE0,
1050 .amux = EM28XX_AMUX_LINE_IN,
1051 }, {
1052 .type = EM28XX_VMUX_SVIDEO,
1053 .vmux = SAA7115_SVIDEO3,
1054 .amux = EM28XX_AMUX_LINE_IN,
1055 } },
1056 },
1057 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
1058 .name = "Terratec Cinergy A Hybrid XS",
1059 .valid = EM28XX_BOARD_NOT_VALIDATED,
1060 .tuner_type = TUNER_XC2028,
1061 .tuner_gpio = default_tuner_gpio,
1062 .decoder = EM28XX_TVP5150,
1063
1064 .input = { {
1065 .type = EM28XX_VMUX_TELEVISION,
1066 .vmux = TVP5150_COMPOSITE0,
1067 .amux = EM28XX_AMUX_VIDEO,
1068 .gpio = hauppauge_wintv_hvr_900_analog,
1069 }, {
1070 .type = EM28XX_VMUX_COMPOSITE,
1071 .vmux = TVP5150_COMPOSITE1,
1072 .amux = EM28XX_AMUX_LINE_IN,
1073 .gpio = hauppauge_wintv_hvr_900_analog,
1074 }, {
1075 .type = EM28XX_VMUX_SVIDEO,
1076 .vmux = TVP5150_SVIDEO,
1077 .amux = EM28XX_AMUX_LINE_IN,
1078 .gpio = hauppauge_wintv_hvr_900_analog,
1079 } },
1080 },
1081 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
1082 .name = "KWorld PVRTV 300U",
1083 .valid = EM28XX_BOARD_NOT_VALIDATED,
1084 .tuner_type = TUNER_XC2028,
1085 .tuner_gpio = default_tuner_gpio,
1086 .decoder = EM28XX_TVP5150,
1087 .input = { {
1088 .type = EM28XX_VMUX_TELEVISION,
1089 .vmux = TVP5150_COMPOSITE0,
1090 .amux = EM28XX_AMUX_VIDEO,
1091 }, {
1092 .type = EM28XX_VMUX_COMPOSITE,
1093 .vmux = TVP5150_COMPOSITE1,
1094 .amux = EM28XX_AMUX_LINE_IN,
1095 }, {
1096 .type = EM28XX_VMUX_SVIDEO,
1097 .vmux = TVP5150_SVIDEO,
1098 .amux = EM28XX_AMUX_LINE_IN,
1099 } },
1100 },
1101 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
1102 .name = "Yakumo MovieMixer",
1103 .tuner_type = TUNER_ABSENT, /* Capture only device */
1104 .decoder = EM28XX_TVP5150,
1105 .input = { {
1106 .type = EM28XX_VMUX_TELEVISION,
1107 .vmux = TVP5150_COMPOSITE0,
1108 .amux = EM28XX_AMUX_VIDEO,
1109 }, {
1110 .type = EM28XX_VMUX_COMPOSITE,
1111 .vmux = TVP5150_COMPOSITE1,
1112 .amux = EM28XX_AMUX_LINE_IN,
1113 }, {
1114 .type = EM28XX_VMUX_SVIDEO,
1115 .vmux = TVP5150_SVIDEO,
1116 .amux = EM28XX_AMUX_LINE_IN,
1117 } },
1118 },
1119 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
1120 .name = "EM2860/TVP5150 Reference Design",
1121 .tuner_type = TUNER_ABSENT, /* Capture only device */
1122 .decoder = EM28XX_TVP5150,
1123 .input = { {
1124 .type = EM28XX_VMUX_COMPOSITE,
1125 .vmux = TVP5150_COMPOSITE1,
1126 .amux = EM28XX_AMUX_LINE_IN,
1127 }, {
1128 .type = EM28XX_VMUX_SVIDEO,
1129 .vmux = TVP5150_SVIDEO,
1130 .amux = EM28XX_AMUX_LINE_IN,
1131 } },
1132 },
1133 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
1134 .name = "Plextor ConvertX PX-TV100U",
1135 .tuner_type = TUNER_TNF_5335MF,
1136 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
1137 EM28XX_XCLK_FREQUENCY_12MHZ,
1138 .tda9887_conf = TDA9887_PRESENT,
1139 .decoder = EM28XX_TVP5150,
1140 .has_msp34xx = 1,
1141 .input = { {
1142 .type = EM28XX_VMUX_TELEVISION,
1143 .vmux = TVP5150_COMPOSITE0,
1144 .amux = EM28XX_AMUX_LINE_IN,
1145 .gpio = pinnacle_hybrid_pro_analog,
1146 }, {
1147 .type = EM28XX_VMUX_COMPOSITE,
1148 .vmux = TVP5150_COMPOSITE1,
1149 .amux = EM28XX_AMUX_LINE_IN,
1150 .gpio = pinnacle_hybrid_pro_analog,
1151 }, {
1152 .type = EM28XX_VMUX_SVIDEO,
1153 .vmux = TVP5150_SVIDEO,
1154 .amux = EM28XX_AMUX_LINE_IN,
1155 .gpio = pinnacle_hybrid_pro_analog,
1156 } },
1157 },
1158
1159 /* Those boards with em2870 are DVB Only*/
1160
1161 [EM2870_BOARD_TERRATEC_XS] = {
1162 .name = "Terratec Cinergy T XS",
1163 .valid = EM28XX_BOARD_NOT_VALIDATED,
1164 .tuner_type = TUNER_XC2028,
1165 .tuner_gpio = default_tuner_gpio,
1166 },
1167 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
1168 .name = "Terratec Cinergy T XS (MT2060)",
1169 .xclk = EM28XX_XCLK_IR_RC5_MODE |
1170 EM28XX_XCLK_FREQUENCY_12MHZ,
1171 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1172 .tuner_type = TUNER_ABSENT, /* MT2060 */
1173 .has_dvb = 1,
1174 .tuner_gpio = default_tuner_gpio,
1175 },
1176 [EM2870_BOARD_KWORLD_350U] = {
1177 .name = "Kworld 350 U DVB-T",
1178 .valid = EM28XX_BOARD_NOT_VALIDATED,
1179 .tuner_type = TUNER_XC2028,
1180 .tuner_gpio = default_tuner_gpio,
1181 },
1182 [EM2870_BOARD_KWORLD_355U] = {
1183 .name = "Kworld 355 U DVB-T",
1184 .valid = EM28XX_BOARD_NOT_VALIDATED,
1185 .tuner_type = TUNER_ABSENT,
1186 .tuner_gpio = default_tuner_gpio,
1187 .has_dvb = 1,
1188 .dvb_gpio = default_digital,
1189 },
1190 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
1191 .name = "Pinnacle PCTV DVB-T",
1192 .valid = EM28XX_BOARD_NOT_VALIDATED,
1193 .tuner_type = TUNER_ABSENT, /* MT2060 */
1194 /* djh - I have serious doubts this is right... */
1195 .xclk = EM28XX_XCLK_IR_RC5_MODE |
1196 EM28XX_XCLK_FREQUENCY_10MHZ,
1197 },
1198 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
1199 .name = "Compro, VideoMate U3",
1200 .valid = EM28XX_BOARD_NOT_VALIDATED,
1201 .tuner_type = TUNER_ABSENT, /* MT2060 */
1202 },
1203
1204 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
1205 .name = "Terratec Hybrid XS Secam",
1206 .has_msp34xx = 1,
1207 .tuner_type = TUNER_XC2028,
1208 .tuner_gpio = default_tuner_gpio,
1209 .decoder = EM28XX_TVP5150,
1210 .has_dvb = 1,
1211 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
1212 .input = { {
1213 .type = EM28XX_VMUX_TELEVISION,
1214 .vmux = TVP5150_COMPOSITE0,
1215 .amux = EM28XX_AMUX_VIDEO,
1216 .gpio = terratec_cinergy_USB_XS_FR_analog,
1217 }, {
1218 .type = EM28XX_VMUX_COMPOSITE,
1219 .vmux = TVP5150_COMPOSITE1,
1220 .amux = EM28XX_AMUX_LINE_IN,
1221 .gpio = terratec_cinergy_USB_XS_FR_analog,
1222 }, {
1223 .type = EM28XX_VMUX_SVIDEO,
1224 .vmux = TVP5150_SVIDEO,
1225 .amux = EM28XX_AMUX_LINE_IN,
1226 .gpio = terratec_cinergy_USB_XS_FR_analog,
1227 } },
1228 },
1229 [EM2884_BOARD_TERRATEC_H5] = {
1230 .name = "Terratec Cinergy H5",
1231 .has_dvb = 1,
1232 #if 0
1233 .tuner_type = TUNER_PHILIPS_TDA8290,
1234 .tuner_addr = 0x41,
1235 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
1236 .tuner_gpio = terratec_h5_gpio,
1237 #else
1238 .tuner_type = TUNER_ABSENT,
1239 #endif
1240 .def_i2c_bus = 1,
1241 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1242 EM28XX_I2C_FREQ_400_KHZ,
1243 },
1244 [EM2884_BOARD_TERRATEC_H6] = {
1245 .name = "Terratec Cinergy H6 rev. 2",
1246 .has_dvb = 1,
1247 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
1248 #if 0
1249 .tuner_type = TUNER_PHILIPS_TDA8290,
1250 .tuner_addr = 0x41,
1251 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
1252 .tuner_gpio = terratec_h5_gpio,
1253 #else
1254 .tuner_type = TUNER_ABSENT,
1255 #endif
1256 .def_i2c_bus = 1,
1257 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1258 EM28XX_I2C_FREQ_400_KHZ,
1259 },
1260 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
1261 .name = "Hauppauge WinTV HVR 930C",
1262 .has_dvb = 1,
1263 #if 0 /* FIXME: Add analog support */
1264 .tuner_type = TUNER_XC5000,
1265 .tuner_addr = 0x41,
1266 .dvb_gpio = hauppauge_930c_digital,
1267 .tuner_gpio = hauppauge_930c_gpio,
1268 #else
1269 .tuner_type = TUNER_ABSENT,
1270 #endif
1271 .ir_codes = RC_MAP_HAUPPAUGE,
1272 .def_i2c_bus = 1,
1273 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1274 EM28XX_I2C_FREQ_400_KHZ,
1275 },
1276 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = {
1277 .name = "C3 Tech Digital Duo HDTV/SDTV USB",
1278 .has_dvb = 1,
1279 /* FIXME: Add analog support - need a saa7136 driver */
1280 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
1281 .ir_codes = RC_MAP_EMPTY,
1282 .def_i2c_bus = 1,
1283 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1284 .dvb_gpio = c3tech_digital_duo_digital,
1285 },
1286 [EM2884_BOARD_CINERGY_HTC_STICK] = {
1287 .name = "Terratec Cinergy HTC Stick",
1288 .has_dvb = 1,
1289 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
1290 .tuner_type = TUNER_ABSENT,
1291 .def_i2c_bus = 1,
1292 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1293 EM28XX_I2C_FREQ_400_KHZ,
1294 },
1295 [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = {
1296 .name = "Elgato EyeTV Hybrid 2008 INT",
1297 .has_dvb = 1,
1298 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
1299 .tuner_type = TUNER_ABSENT,
1300 .def_i2c_bus = 1,
1301 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1302 EM28XX_I2C_FREQ_400_KHZ,
1303 },
1304 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
1305 .name = "Hauppauge WinTV HVR 900",
1306 .tda9887_conf = TDA9887_PRESENT,
1307 .tuner_type = TUNER_XC2028,
1308 .tuner_gpio = default_tuner_gpio,
1309 .mts_firmware = 1,
1310 .has_dvb = 1,
1311 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1312 .ir_codes = RC_MAP_HAUPPAUGE,
1313 .decoder = EM28XX_TVP5150,
1314 .input = { {
1315 .type = EM28XX_VMUX_TELEVISION,
1316 .vmux = TVP5150_COMPOSITE0,
1317 .amux = EM28XX_AMUX_VIDEO,
1318 .gpio = hauppauge_wintv_hvr_900_analog,
1319 }, {
1320 .type = EM28XX_VMUX_COMPOSITE,
1321 .vmux = TVP5150_COMPOSITE1,
1322 .amux = EM28XX_AMUX_LINE_IN,
1323 .gpio = hauppauge_wintv_hvr_900_analog,
1324 }, {
1325 .type = EM28XX_VMUX_SVIDEO,
1326 .vmux = TVP5150_SVIDEO,
1327 .amux = EM28XX_AMUX_LINE_IN,
1328 .gpio = hauppauge_wintv_hvr_900_analog,
1329 } },
1330 },
1331 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
1332 .name = "Hauppauge WinTV HVR 900 (R2)",
1333 .tda9887_conf = TDA9887_PRESENT,
1334 .tuner_type = TUNER_XC2028,
1335 .tuner_gpio = default_tuner_gpio,
1336 .mts_firmware = 1,
1337 .has_dvb = 1,
1338 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1339 .ir_codes = RC_MAP_HAUPPAUGE,
1340 .decoder = EM28XX_TVP5150,
1341 .input = { {
1342 .type = EM28XX_VMUX_TELEVISION,
1343 .vmux = TVP5150_COMPOSITE0,
1344 .amux = EM28XX_AMUX_VIDEO,
1345 .gpio = hauppauge_wintv_hvr_900_analog,
1346 }, {
1347 .type = EM28XX_VMUX_COMPOSITE,
1348 .vmux = TVP5150_COMPOSITE1,
1349 .amux = EM28XX_AMUX_LINE_IN,
1350 .gpio = hauppauge_wintv_hvr_900_analog,
1351 }, {
1352 .type = EM28XX_VMUX_SVIDEO,
1353 .vmux = TVP5150_SVIDEO,
1354 .amux = EM28XX_AMUX_LINE_IN,
1355 .gpio = hauppauge_wintv_hvr_900_analog,
1356 } },
1357 },
1358 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
1359 .name = "Hauppauge WinTV HVR 850",
1360 .tuner_type = TUNER_XC2028,
1361 .tuner_gpio = default_tuner_gpio,
1362 .mts_firmware = 1,
1363 .has_dvb = 1,
1364 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1365 .ir_codes = RC_MAP_HAUPPAUGE,
1366 .decoder = EM28XX_TVP5150,
1367 .input = { {
1368 .type = EM28XX_VMUX_TELEVISION,
1369 .vmux = TVP5150_COMPOSITE0,
1370 .amux = EM28XX_AMUX_VIDEO,
1371 .gpio = hauppauge_wintv_hvr_900_analog,
1372 }, {
1373 .type = EM28XX_VMUX_COMPOSITE,
1374 .vmux = TVP5150_COMPOSITE1,
1375 .amux = EM28XX_AMUX_LINE_IN,
1376 .gpio = hauppauge_wintv_hvr_900_analog,
1377 }, {
1378 .type = EM28XX_VMUX_SVIDEO,
1379 .vmux = TVP5150_SVIDEO,
1380 .amux = EM28XX_AMUX_LINE_IN,
1381 .gpio = hauppauge_wintv_hvr_900_analog,
1382 } },
1383 },
1384 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
1385 .name = "Hauppauge WinTV HVR 950",
1386 .tuner_type = TUNER_XC2028,
1387 .tuner_gpio = default_tuner_gpio,
1388 .mts_firmware = 1,
1389 .has_dvb = 1,
1390 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1391 .ir_codes = RC_MAP_HAUPPAUGE,
1392 .decoder = EM28XX_TVP5150,
1393 .input = { {
1394 .type = EM28XX_VMUX_TELEVISION,
1395 .vmux = TVP5150_COMPOSITE0,
1396 .amux = EM28XX_AMUX_VIDEO,
1397 .gpio = hauppauge_wintv_hvr_900_analog,
1398 }, {
1399 .type = EM28XX_VMUX_COMPOSITE,
1400 .vmux = TVP5150_COMPOSITE1,
1401 .amux = EM28XX_AMUX_LINE_IN,
1402 .gpio = hauppauge_wintv_hvr_900_analog,
1403 }, {
1404 .type = EM28XX_VMUX_SVIDEO,
1405 .vmux = TVP5150_SVIDEO,
1406 .amux = EM28XX_AMUX_LINE_IN,
1407 .gpio = hauppauge_wintv_hvr_900_analog,
1408 } },
1409 },
1410 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
1411 .name = "Pinnacle PCTV HD Pro Stick",
1412 .tuner_type = TUNER_XC2028,
1413 .tuner_gpio = default_tuner_gpio,
1414 .mts_firmware = 1,
1415 .has_dvb = 1,
1416 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1417 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1418 .decoder = EM28XX_TVP5150,
1419 .input = { {
1420 .type = EM28XX_VMUX_TELEVISION,
1421 .vmux = TVP5150_COMPOSITE0,
1422 .amux = EM28XX_AMUX_VIDEO,
1423 .gpio = hauppauge_wintv_hvr_900_analog,
1424 }, {
1425 .type = EM28XX_VMUX_COMPOSITE,
1426 .vmux = TVP5150_COMPOSITE1,
1427 .amux = EM28XX_AMUX_LINE_IN,
1428 .gpio = hauppauge_wintv_hvr_900_analog,
1429 }, {
1430 .type = EM28XX_VMUX_SVIDEO,
1431 .vmux = TVP5150_SVIDEO,
1432 .amux = EM28XX_AMUX_LINE_IN,
1433 .gpio = hauppauge_wintv_hvr_900_analog,
1434 } },
1435 },
1436 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
1437 .name = "AMD ATI TV Wonder HD 600",
1438 .tuner_type = TUNER_XC2028,
1439 .tuner_gpio = default_tuner_gpio,
1440 .mts_firmware = 1,
1441 .has_dvb = 1,
1442 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1443 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
1444 .decoder = EM28XX_TVP5150,
1445 .input = { {
1446 .type = EM28XX_VMUX_TELEVISION,
1447 .vmux = TVP5150_COMPOSITE0,
1448 .amux = EM28XX_AMUX_VIDEO,
1449 .gpio = hauppauge_wintv_hvr_900_analog,
1450 }, {
1451 .type = EM28XX_VMUX_COMPOSITE,
1452 .vmux = TVP5150_COMPOSITE1,
1453 .amux = EM28XX_AMUX_LINE_IN,
1454 .gpio = hauppauge_wintv_hvr_900_analog,
1455 }, {
1456 .type = EM28XX_VMUX_SVIDEO,
1457 .vmux = TVP5150_SVIDEO,
1458 .amux = EM28XX_AMUX_LINE_IN,
1459 .gpio = hauppauge_wintv_hvr_900_analog,
1460 } },
1461 },
1462 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
1463 .name = "Terratec Hybrid XS",
1464 .tuner_type = TUNER_XC2028,
1465 .tuner_gpio = default_tuner_gpio,
1466 .decoder = EM28XX_TVP5150,
1467 .has_dvb = 1,
1468 .dvb_gpio = default_digital,
1469 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1470 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1471 .input = { {
1472 .type = EM28XX_VMUX_TELEVISION,
1473 .vmux = TVP5150_COMPOSITE0,
1474 .amux = EM28XX_AMUX_VIDEO,
1475 .gpio = default_analog,
1476 }, {
1477 .type = EM28XX_VMUX_COMPOSITE,
1478 .vmux = TVP5150_COMPOSITE1,
1479 .amux = EM28XX_AMUX_LINE_IN,
1480 .gpio = default_analog,
1481 }, {
1482 .type = EM28XX_VMUX_SVIDEO,
1483 .vmux = TVP5150_SVIDEO,
1484 .amux = EM28XX_AMUX_LINE_IN,
1485 .gpio = default_analog,
1486 } },
1487 },
1488 /*
1489 * maybe there's a reason behind it why Terratec sells the Hybrid XS
1490 * as Prodigy XS with a different PID, let's keep it separated for now
1491 * maybe we'll need it later on
1492 */
1493 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1494 .name = "Terratec Prodigy XS",
1495 .tuner_type = TUNER_XC2028,
1496 .tuner_gpio = default_tuner_gpio,
1497 .decoder = EM28XX_TVP5150,
1498 .input = { {
1499 .type = EM28XX_VMUX_TELEVISION,
1500 .vmux = TVP5150_COMPOSITE0,
1501 .amux = EM28XX_AMUX_VIDEO,
1502 .gpio = hauppauge_wintv_hvr_900_analog,
1503 }, {
1504 .type = EM28XX_VMUX_COMPOSITE,
1505 .vmux = TVP5150_COMPOSITE1,
1506 .amux = EM28XX_AMUX_LINE_IN,
1507 .gpio = hauppauge_wintv_hvr_900_analog,
1508 }, {
1509 .type = EM28XX_VMUX_SVIDEO,
1510 .vmux = TVP5150_SVIDEO,
1511 .amux = EM28XX_AMUX_LINE_IN,
1512 .gpio = hauppauge_wintv_hvr_900_analog,
1513 } },
1514 },
1515 [EM2820_BOARD_MSI_VOX_USB_2] = {
1516 .name = "MSI VOX USB 2.0",
1517 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1518 .tda9887_conf = TDA9887_PRESENT |
1519 TDA9887_PORT1_ACTIVE |
1520 TDA9887_PORT2_ACTIVE,
1521 .max_range_640_480 = 1,
1522 .decoder = EM28XX_SAA711X,
1523 .input = { {
1524 .type = EM28XX_VMUX_TELEVISION,
1525 .vmux = SAA7115_COMPOSITE4,
1526 .amux = EM28XX_AMUX_VIDEO,
1527 }, {
1528 .type = EM28XX_VMUX_COMPOSITE,
1529 .vmux = SAA7115_COMPOSITE0,
1530 .amux = EM28XX_AMUX_LINE_IN,
1531 }, {
1532 .type = EM28XX_VMUX_SVIDEO,
1533 .vmux = SAA7115_SVIDEO3,
1534 .amux = EM28XX_AMUX_LINE_IN,
1535 } },
1536 },
1537 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1538 .name = "Terratec Cinergy 200 USB",
1539 .is_em2800 = 1,
1540 .has_ir_i2c = 1,
1541 .tuner_type = TUNER_LG_TALN,
1542 .tda9887_conf = TDA9887_PRESENT,
1543 .decoder = EM28XX_SAA711X,
1544 .input = { {
1545 .type = EM28XX_VMUX_TELEVISION,
1546 .vmux = SAA7115_COMPOSITE2,
1547 .amux = EM28XX_AMUX_VIDEO,
1548 }, {
1549 .type = EM28XX_VMUX_COMPOSITE,
1550 .vmux = SAA7115_COMPOSITE0,
1551 .amux = EM28XX_AMUX_LINE_IN,
1552 }, {
1553 .type = EM28XX_VMUX_SVIDEO,
1554 .vmux = SAA7115_SVIDEO3,
1555 .amux = EM28XX_AMUX_LINE_IN,
1556 } },
1557 },
1558 [EM2800_BOARD_GRABBEEX_USB2800] = {
1559 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1560 .is_em2800 = 1,
1561 .decoder = EM28XX_SAA711X,
1562 .tuner_type = TUNER_ABSENT, /* capture only board */
1563 .input = { {
1564 .type = EM28XX_VMUX_COMPOSITE,
1565 .vmux = SAA7115_COMPOSITE0,
1566 .amux = EM28XX_AMUX_LINE_IN,
1567 }, {
1568 .type = EM28XX_VMUX_SVIDEO,
1569 .vmux = SAA7115_SVIDEO3,
1570 .amux = EM28XX_AMUX_LINE_IN,
1571 } },
1572 },
1573 [EM2800_BOARD_VC211A] = {
1574 .name = "Actionmaster/LinXcel/Digitus VC211A",
1575 .is_em2800 = 1,
1576 .tuner_type = TUNER_ABSENT, /* Capture-only board */
1577 .decoder = EM28XX_SAA711X,
1578 .input = { {
1579 .type = EM28XX_VMUX_COMPOSITE,
1580 .vmux = SAA7115_COMPOSITE0,
1581 .amux = EM28XX_AMUX_LINE_IN,
1582 .gpio = vc211a_enable,
1583 }, {
1584 .type = EM28XX_VMUX_SVIDEO,
1585 .vmux = SAA7115_SVIDEO3,
1586 .amux = EM28XX_AMUX_LINE_IN,
1587 .gpio = vc211a_enable,
1588 } },
1589 },
1590 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1591 .name = "Leadtek Winfast USB II",
1592 .is_em2800 = 1,
1593 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1594 .tda9887_conf = TDA9887_PRESENT,
1595 .decoder = EM28XX_SAA711X,
1596 .input = { {
1597 .type = EM28XX_VMUX_TELEVISION,
1598 .vmux = SAA7115_COMPOSITE2,
1599 .amux = EM28XX_AMUX_VIDEO,
1600 }, {
1601 .type = EM28XX_VMUX_COMPOSITE,
1602 .vmux = SAA7115_COMPOSITE0,
1603 .amux = EM28XX_AMUX_LINE_IN,
1604 }, {
1605 .type = EM28XX_VMUX_SVIDEO,
1606 .vmux = SAA7115_SVIDEO3,
1607 .amux = EM28XX_AMUX_LINE_IN,
1608 } },
1609 },
1610 [EM2800_BOARD_KWORLD_USB2800] = {
1611 .name = "Kworld USB2800",
1612 .is_em2800 = 1,
1613 .tuner_type = TUNER_PHILIPS_FCV1236D,
1614 .tda9887_conf = TDA9887_PRESENT,
1615 .decoder = EM28XX_SAA711X,
1616 .input = { {
1617 .type = EM28XX_VMUX_TELEVISION,
1618 .vmux = SAA7115_COMPOSITE2,
1619 .amux = EM28XX_AMUX_VIDEO,
1620 }, {
1621 .type = EM28XX_VMUX_COMPOSITE,
1622 .vmux = SAA7115_COMPOSITE0,
1623 .amux = EM28XX_AMUX_LINE_IN,
1624 }, {
1625 .type = EM28XX_VMUX_SVIDEO,
1626 .vmux = SAA7115_SVIDEO3,
1627 .amux = EM28XX_AMUX_LINE_IN,
1628 } },
1629 },
1630 [EM2820_BOARD_PINNACLE_DVC_90] = {
1631 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
1632 .tuner_type = TUNER_ABSENT, /* capture only board */
1633 .decoder = EM28XX_SAA711X,
1634 .input = { {
1635 .type = EM28XX_VMUX_COMPOSITE,
1636 .vmux = SAA7115_COMPOSITE0,
1637 .amux = EM28XX_AMUX_LINE_IN,
1638 }, {
1639 .type = EM28XX_VMUX_SVIDEO,
1640 .vmux = SAA7115_SVIDEO3,
1641 .amux = EM28XX_AMUX_LINE_IN,
1642 } },
1643 },
1644 [EM2800_BOARD_VGEAR_POCKETTV] = {
1645 .name = "V-Gear PocketTV",
1646 .is_em2800 = 1,
1647 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1648 .tda9887_conf = TDA9887_PRESENT,
1649 .decoder = EM28XX_SAA711X,
1650 .input = { {
1651 .type = EM28XX_VMUX_TELEVISION,
1652 .vmux = SAA7115_COMPOSITE2,
1653 .amux = EM28XX_AMUX_VIDEO,
1654 }, {
1655 .type = EM28XX_VMUX_COMPOSITE,
1656 .vmux = SAA7115_COMPOSITE0,
1657 .amux = EM28XX_AMUX_LINE_IN,
1658 }, {
1659 .type = EM28XX_VMUX_SVIDEO,
1660 .vmux = SAA7115_SVIDEO3,
1661 .amux = EM28XX_AMUX_LINE_IN,
1662 } },
1663 },
1664 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1665 .name = "Pixelview PlayTV Box 4 USB 2.0",
1666 .tda9887_conf = TDA9887_PRESENT,
1667 .tuner_type = TUNER_YMEC_TVF_5533MF,
1668 .decoder = EM28XX_SAA711X,
1669 .input = { {
1670 .type = EM28XX_VMUX_TELEVISION,
1671 .vmux = SAA7115_COMPOSITE2,
1672 .amux = EM28XX_AMUX_VIDEO,
1673 .aout = EM28XX_AOUT_MONO | /* I2S */
1674 EM28XX_AOUT_MASTER, /* Line out pin */
1675 }, {
1676 .type = EM28XX_VMUX_COMPOSITE,
1677 .vmux = SAA7115_COMPOSITE0,
1678 .amux = EM28XX_AMUX_LINE_IN,
1679 }, {
1680 .type = EM28XX_VMUX_SVIDEO,
1681 .vmux = SAA7115_SVIDEO3,
1682 .amux = EM28XX_AMUX_LINE_IN,
1683 } },
1684 },
1685 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1686 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1687 .buttons = std_snapshot_button,
1688 .tda9887_conf = TDA9887_PRESENT,
1689 .tuner_type = TUNER_YMEC_TVF_5533MF,
1690 .tuner_addr = 0x60,
1691 .decoder = EM28XX_SAA711X,
1692 .input = { {
1693 .type = EM28XX_VMUX_TELEVISION,
1694 .vmux = SAA7115_COMPOSITE2,
1695 .amux = EM28XX_AMUX_VIDEO,
1696 .aout = EM28XX_AOUT_MONO | /* I2S */
1697 EM28XX_AOUT_MASTER, /* Line out pin */
1698 }, {
1699 .type = EM28XX_VMUX_COMPOSITE,
1700 .vmux = SAA7115_COMPOSITE0,
1701 .amux = EM28XX_AMUX_LINE_IN,
1702 }, {
1703 .type = EM28XX_VMUX_SVIDEO,
1704 .vmux = SAA7115_SVIDEO3,
1705 .amux = EM28XX_AMUX_LINE_IN,
1706 } },
1707 },
1708 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1709 .name = "EM2860/SAA711X Reference Design",
1710 .buttons = std_snapshot_button,
1711 .tuner_type = TUNER_ABSENT,
1712 .decoder = EM28XX_SAA711X,
1713 .input = { {
1714 .type = EM28XX_VMUX_SVIDEO,
1715 .vmux = SAA7115_SVIDEO3,
1716 }, {
1717 .type = EM28XX_VMUX_COMPOSITE,
1718 .vmux = SAA7115_COMPOSITE0,
1719 } },
1720 },
1721
1722 [EM2874_BOARD_LEADERSHIP_ISDBT] = {
1723 .def_i2c_bus = 1,
1724 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1725 EM28XX_I2C_FREQ_100_KHZ,
1726 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
1727 .name = "EM2874 Leadership ISDBT",
1728 .tuner_type = TUNER_ABSENT,
1729 .tuner_gpio = leadership_reset,
1730 .dvb_gpio = leadership_digital,
1731 .has_dvb = 1,
1732 },
1733
1734 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1735 .name = "MSI DigiVox A/D",
1736 .valid = EM28XX_BOARD_NOT_VALIDATED,
1737 .tuner_type = TUNER_XC2028,
1738 .tuner_gpio = default_tuner_gpio,
1739 .decoder = EM28XX_TVP5150,
1740 .input = { {
1741 .type = EM28XX_VMUX_TELEVISION,
1742 .vmux = TVP5150_COMPOSITE0,
1743 .amux = EM28XX_AMUX_VIDEO,
1744 .gpio = em2880_msi_digivox_ad_analog,
1745 }, {
1746 .type = EM28XX_VMUX_COMPOSITE,
1747 .vmux = TVP5150_COMPOSITE1,
1748 .amux = EM28XX_AMUX_LINE_IN,
1749 .gpio = em2880_msi_digivox_ad_analog,
1750 }, {
1751 .type = EM28XX_VMUX_SVIDEO,
1752 .vmux = TVP5150_SVIDEO,
1753 .amux = EM28XX_AMUX_LINE_IN,
1754 .gpio = em2880_msi_digivox_ad_analog,
1755 } },
1756 },
1757 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1758 .name = "MSI DigiVox A/D II",
1759 .valid = EM28XX_BOARD_NOT_VALIDATED,
1760 .tuner_type = TUNER_XC2028,
1761 .tuner_gpio = default_tuner_gpio,
1762 .decoder = EM28XX_TVP5150,
1763 .input = { {
1764 .type = EM28XX_VMUX_TELEVISION,
1765 .vmux = TVP5150_COMPOSITE0,
1766 .amux = EM28XX_AMUX_VIDEO,
1767 .gpio = em2880_msi_digivox_ad_analog,
1768 }, {
1769 .type = EM28XX_VMUX_COMPOSITE,
1770 .vmux = TVP5150_COMPOSITE1,
1771 .amux = EM28XX_AMUX_LINE_IN,
1772 .gpio = em2880_msi_digivox_ad_analog,
1773 }, {
1774 .type = EM28XX_VMUX_SVIDEO,
1775 .vmux = TVP5150_SVIDEO,
1776 .amux = EM28XX_AMUX_LINE_IN,
1777 .gpio = em2880_msi_digivox_ad_analog,
1778 } },
1779 },
1780 [EM2880_BOARD_KWORLD_DVB_305U] = {
1781 .name = "KWorld DVB-T 305U",
1782 .tuner_type = TUNER_XC2028,
1783 .tuner_gpio = default_tuner_gpio,
1784 .decoder = EM28XX_TVP5150,
1785 .input = { {
1786 .type = EM28XX_VMUX_TELEVISION,
1787 .vmux = TVP5150_COMPOSITE0,
1788 .amux = EM28XX_AMUX_VIDEO,
1789 }, {
1790 .type = EM28XX_VMUX_COMPOSITE,
1791 .vmux = TVP5150_COMPOSITE1,
1792 .amux = EM28XX_AMUX_LINE_IN,
1793 }, {
1794 .type = EM28XX_VMUX_SVIDEO,
1795 .vmux = TVP5150_SVIDEO,
1796 .amux = EM28XX_AMUX_LINE_IN,
1797 } },
1798 },
1799 [EM2880_BOARD_KWORLD_DVB_310U] = {
1800 .name = "KWorld DVB-T 310U",
1801 .tuner_type = TUNER_XC2028,
1802 .tuner_gpio = default_tuner_gpio,
1803 .has_dvb = 1,
1804 .dvb_gpio = default_digital,
1805 .mts_firmware = 1,
1806 .decoder = EM28XX_TVP5150,
1807 .input = { {
1808 .type = EM28XX_VMUX_TELEVISION,
1809 .vmux = TVP5150_COMPOSITE0,
1810 .amux = EM28XX_AMUX_VIDEO,
1811 .gpio = default_analog,
1812 }, {
1813 .type = EM28XX_VMUX_COMPOSITE,
1814 .vmux = TVP5150_COMPOSITE1,
1815 .amux = EM28XX_AMUX_LINE_IN,
1816 .gpio = default_analog,
1817 }, { /* S-video has not been tested yet */
1818 .type = EM28XX_VMUX_SVIDEO,
1819 .vmux = TVP5150_SVIDEO,
1820 .amux = EM28XX_AMUX_LINE_IN,
1821 .gpio = default_analog,
1822 } },
1823 },
1824 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1825 .name = "KWorld ATSC 315U HDTV TV Box",
1826 .valid = EM28XX_BOARD_NOT_VALIDATED,
1827 .tuner_type = TUNER_THOMSON_DTT761X,
1828 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1829 .tda9887_conf = TDA9887_PRESENT,
1830 .decoder = EM28XX_SAA711X,
1831 .has_dvb = 1,
1832 .dvb_gpio = em2882_kworld_315u_digital,
1833 .ir_codes = RC_MAP_KWORLD_315U,
1834 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1835 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1836 #if 0
1837 /* FIXME: Analog mode - still not ready */
1838 .input = { {
1839 .type = EM28XX_VMUX_TELEVISION,
1840 .vmux = SAA7115_COMPOSITE2,
1841 .amux = EM28XX_AMUX_VIDEO,
1842 .gpio = em2882_kworld_315u_analog,
1843 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1844 }, {
1845 .type = EM28XX_VMUX_COMPOSITE,
1846 .vmux = SAA7115_COMPOSITE0,
1847 .amux = EM28XX_AMUX_LINE_IN,
1848 .gpio = em2882_kworld_315u_analog1,
1849 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1850 }, {
1851 .type = EM28XX_VMUX_SVIDEO,
1852 .vmux = SAA7115_SVIDEO3,
1853 .amux = EM28XX_AMUX_LINE_IN,
1854 .gpio = em2882_kworld_315u_analog1,
1855 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1856 } },
1857 #endif
1858 },
1859 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1860 .name = "Empire dual TV",
1861 .tuner_type = TUNER_XC2028,
1862 .tuner_gpio = default_tuner_gpio,
1863 .has_dvb = 1,
1864 .dvb_gpio = default_digital,
1865 .mts_firmware = 1,
1866 .decoder = EM28XX_TVP5150,
1867 .input = { {
1868 .type = EM28XX_VMUX_TELEVISION,
1869 .vmux = TVP5150_COMPOSITE0,
1870 .amux = EM28XX_AMUX_VIDEO,
1871 .gpio = default_analog,
1872 }, {
1873 .type = EM28XX_VMUX_COMPOSITE,
1874 .vmux = TVP5150_COMPOSITE1,
1875 .amux = EM28XX_AMUX_LINE_IN,
1876 .gpio = default_analog,
1877 }, {
1878 .type = EM28XX_VMUX_SVIDEO,
1879 .vmux = TVP5150_SVIDEO,
1880 .amux = EM28XX_AMUX_LINE_IN,
1881 .gpio = default_analog,
1882 } },
1883 },
1884 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1885 .name = "DNT DA2 Hybrid",
1886 .valid = EM28XX_BOARD_NOT_VALIDATED,
1887 .tuner_type = TUNER_XC2028,
1888 .tuner_gpio = default_tuner_gpio,
1889 .decoder = EM28XX_TVP5150,
1890 .input = { {
1891 .type = EM28XX_VMUX_TELEVISION,
1892 .vmux = TVP5150_COMPOSITE0,
1893 .amux = EM28XX_AMUX_VIDEO,
1894 .gpio = default_analog,
1895 }, {
1896 .type = EM28XX_VMUX_COMPOSITE,
1897 .vmux = TVP5150_COMPOSITE1,
1898 .amux = EM28XX_AMUX_LINE_IN,
1899 .gpio = default_analog,
1900 }, {
1901 .type = EM28XX_VMUX_SVIDEO,
1902 .vmux = TVP5150_SVIDEO,
1903 .amux = EM28XX_AMUX_LINE_IN,
1904 .gpio = default_analog,
1905 } },
1906 },
1907 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1908 .name = "Pinnacle Hybrid Pro",
1909 .tuner_type = TUNER_XC2028,
1910 .tuner_gpio = default_tuner_gpio,
1911 .decoder = EM28XX_TVP5150,
1912 .has_dvb = 1,
1913 .dvb_gpio = pinnacle_hybrid_pro_digital,
1914 .input = { {
1915 .type = EM28XX_VMUX_TELEVISION,
1916 .vmux = TVP5150_COMPOSITE0,
1917 .amux = EM28XX_AMUX_VIDEO,
1918 .gpio = pinnacle_hybrid_pro_analog,
1919 }, {
1920 .type = EM28XX_VMUX_COMPOSITE,
1921 .vmux = TVP5150_COMPOSITE1,
1922 .amux = EM28XX_AMUX_LINE_IN,
1923 .gpio = pinnacle_hybrid_pro_analog,
1924 }, {
1925 .type = EM28XX_VMUX_SVIDEO,
1926 .vmux = TVP5150_SVIDEO,
1927 .amux = EM28XX_AMUX_LINE_IN,
1928 .gpio = pinnacle_hybrid_pro_analog,
1929 } },
1930 },
1931 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
1932 .name = "Pinnacle Hybrid Pro (330e)",
1933 .tuner_type = TUNER_XC2028,
1934 .tuner_gpio = default_tuner_gpio,
1935 .mts_firmware = 1,
1936 .has_dvb = 1,
1937 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1938 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1939 .decoder = EM28XX_TVP5150,
1940 .input = { {
1941 .type = EM28XX_VMUX_TELEVISION,
1942 .vmux = TVP5150_COMPOSITE0,
1943 .amux = EM28XX_AMUX_VIDEO,
1944 .gpio = hauppauge_wintv_hvr_900_analog,
1945 }, {
1946 .type = EM28XX_VMUX_COMPOSITE,
1947 .vmux = TVP5150_COMPOSITE1,
1948 .amux = EM28XX_AMUX_LINE_IN,
1949 .gpio = hauppauge_wintv_hvr_900_analog,
1950 }, {
1951 .type = EM28XX_VMUX_SVIDEO,
1952 .vmux = TVP5150_SVIDEO,
1953 .amux = EM28XX_AMUX_LINE_IN,
1954 .gpio = hauppauge_wintv_hvr_900_analog,
1955 } },
1956 },
1957 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1958 .name = "Kworld VS-DVB-T 323UR",
1959 .tuner_type = TUNER_XC2028,
1960 .tuner_gpio = default_tuner_gpio,
1961 .decoder = EM28XX_TVP5150,
1962 .mts_firmware = 1,
1963 .has_dvb = 1,
1964 .dvb_gpio = kworld_330u_digital,
1965 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1966 .ir_codes = RC_MAP_KWORLD_315U,
1967 .input = { {
1968 .type = EM28XX_VMUX_TELEVISION,
1969 .vmux = TVP5150_COMPOSITE0,
1970 .amux = EM28XX_AMUX_VIDEO,
1971 }, {
1972 .type = EM28XX_VMUX_COMPOSITE,
1973 .vmux = TVP5150_COMPOSITE1,
1974 .amux = EM28XX_AMUX_LINE_IN,
1975 }, {
1976 .type = EM28XX_VMUX_SVIDEO,
1977 .vmux = TVP5150_SVIDEO,
1978 .amux = EM28XX_AMUX_LINE_IN,
1979 } },
1980 },
1981 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1982 .name = "Terratec Cinergy Hybrid T USB XS (em2882)",
1983 .tuner_type = TUNER_XC2028,
1984 .tuner_gpio = default_tuner_gpio,
1985 .mts_firmware = 1,
1986 .decoder = EM28XX_TVP5150,
1987 .has_dvb = 1,
1988 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1989 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1990 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1991 .input = { {
1992 .type = EM28XX_VMUX_TELEVISION,
1993 .vmux = TVP5150_COMPOSITE0,
1994 .amux = EM28XX_AMUX_VIDEO,
1995 .gpio = hauppauge_wintv_hvr_900_analog,
1996 }, {
1997 .type = EM28XX_VMUX_COMPOSITE,
1998 .vmux = TVP5150_COMPOSITE1,
1999 .amux = EM28XX_AMUX_LINE_IN,
2000 .gpio = hauppauge_wintv_hvr_900_analog,
2001 }, {
2002 .type = EM28XX_VMUX_SVIDEO,
2003 .vmux = TVP5150_SVIDEO,
2004 .amux = EM28XX_AMUX_LINE_IN,
2005 .gpio = hauppauge_wintv_hvr_900_analog,
2006 } },
2007 },
2008 [EM2882_BOARD_DIKOM_DK300] = {
2009 .name = "Dikom DK300",
2010 .tuner_type = TUNER_XC2028,
2011 .tuner_gpio = default_tuner_gpio,
2012 .decoder = EM28XX_TVP5150,
2013 .mts_firmware = 1,
2014 .has_dvb = 1,
2015 .dvb_gpio = dikom_dk300_digital,
2016 .input = { {
2017 .type = EM28XX_VMUX_TELEVISION,
2018 .vmux = TVP5150_COMPOSITE0,
2019 .amux = EM28XX_AMUX_VIDEO,
2020 .gpio = default_analog,
2021 } },
2022 },
2023 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
2024 .name = "Kworld PlusTV HD Hybrid 330",
2025 .tuner_type = TUNER_XC2028,
2026 .tuner_gpio = default_tuner_gpio,
2027 .decoder = EM28XX_TVP5150,
2028 .mts_firmware = 1,
2029 .has_dvb = 1,
2030 .dvb_gpio = kworld_330u_digital,
2031 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2032 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2033 EM28XX_I2C_EEPROM_ON_BOARD |
2034 EM28XX_I2C_EEPROM_KEY_VALID,
2035 .input = { {
2036 .type = EM28XX_VMUX_TELEVISION,
2037 .vmux = TVP5150_COMPOSITE0,
2038 .amux = EM28XX_AMUX_VIDEO,
2039 .gpio = kworld_330u_analog,
2040 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
2041 }, {
2042 .type = EM28XX_VMUX_COMPOSITE,
2043 .vmux = TVP5150_COMPOSITE1,
2044 .amux = EM28XX_AMUX_LINE_IN,
2045 .gpio = kworld_330u_analog,
2046 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
2047 }, {
2048 .type = EM28XX_VMUX_SVIDEO,
2049 .vmux = TVP5150_SVIDEO,
2050 .amux = EM28XX_AMUX_LINE_IN,
2051 .gpio = kworld_330u_analog,
2052 } },
2053 },
2054 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
2055 .name = "Compro VideoMate ForYou/Stereo",
2056 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
2057 .tvaudio_addr = 0xb0,
2058 .tda9887_conf = TDA9887_PRESENT,
2059 .decoder = EM28XX_TVP5150,
2060 .adecoder = EM28XX_TVAUDIO,
2061 .mute_gpio = compro_mute_gpio,
2062 .input = { {
2063 .type = EM28XX_VMUX_TELEVISION,
2064 .vmux = TVP5150_COMPOSITE0,
2065 .amux = EM28XX_AMUX_VIDEO,
2066 .gpio = compro_unmute_tv_gpio,
2067 }, {
2068 .type = EM28XX_VMUX_SVIDEO,
2069 .vmux = TVP5150_SVIDEO,
2070 .amux = EM28XX_AMUX_LINE_IN,
2071 .gpio = compro_unmute_svid_gpio,
2072 } },
2073 },
2074 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
2075 .name = "Kaiomy TVnPC U2",
2076 .vchannels = 3,
2077 .tuner_type = TUNER_XC2028,
2078 .tuner_addr = 0x61,
2079 .mts_firmware = 1,
2080 .decoder = EM28XX_TVP5150,
2081 .tuner_gpio = default_tuner_gpio,
2082 .ir_codes = RC_MAP_KAIOMY,
2083 .input = { {
2084 .type = EM28XX_VMUX_TELEVISION,
2085 .vmux = TVP5150_COMPOSITE0,
2086 .amux = EM28XX_AMUX_VIDEO,
2087
2088 }, {
2089 .type = EM28XX_VMUX_COMPOSITE,
2090 .vmux = TVP5150_COMPOSITE1,
2091 .amux = EM28XX_AMUX_LINE_IN,
2092 }, {
2093 .type = EM28XX_VMUX_SVIDEO,
2094 .vmux = TVP5150_SVIDEO,
2095 .amux = EM28XX_AMUX_LINE_IN,
2096 } },
2097 .radio = {
2098 .type = EM28XX_RADIO,
2099 .amux = EM28XX_AMUX_LINE_IN,
2100 }
2101 },
2102 [EM2860_BOARD_EASYCAP] = {
2103 .name = "Easy Cap Capture DC-60",
2104 .vchannels = 2,
2105 .tuner_type = TUNER_ABSENT,
2106 .decoder = EM28XX_SAA711X,
2107 .input = { {
2108 .type = EM28XX_VMUX_COMPOSITE,
2109 .vmux = SAA7115_COMPOSITE0,
2110 .amux = EM28XX_AMUX_LINE_IN,
2111 }, {
2112 .type = EM28XX_VMUX_SVIDEO,
2113 .vmux = SAA7115_SVIDEO3,
2114 .amux = EM28XX_AMUX_LINE_IN,
2115 } },
2116 },
2117 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
2118 .name = "IO-DATA GV-MVP/SZ",
2119 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
2120 .tuner_gpio = default_tuner_gpio,
2121 .tda9887_conf = TDA9887_PRESENT,
2122 .decoder = EM28XX_TVP5150,
2123 .input = { {
2124 .type = EM28XX_VMUX_TELEVISION,
2125 .vmux = TVP5150_COMPOSITE0,
2126 .amux = EM28XX_AMUX_VIDEO,
2127 }, { /* Composite has not been tested yet */
2128 .type = EM28XX_VMUX_COMPOSITE,
2129 .vmux = TVP5150_COMPOSITE1,
2130 .amux = EM28XX_AMUX_VIDEO,
2131 }, { /* S-video has not been tested yet */
2132 .type = EM28XX_VMUX_SVIDEO,
2133 .vmux = TVP5150_SVIDEO,
2134 .amux = EM28XX_AMUX_VIDEO,
2135 } },
2136 },
2137 [EM2860_BOARD_TERRATEC_GRABBY] = {
2138 .name = "Terratec Grabby",
2139 .vchannels = 2,
2140 .tuner_type = TUNER_ABSENT,
2141 .decoder = EM28XX_SAA711X,
2142 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2143 .input = { {
2144 .type = EM28XX_VMUX_COMPOSITE,
2145 .vmux = SAA7115_COMPOSITE0,
2146 .amux = EM28XX_AMUX_LINE_IN,
2147 }, {
2148 .type = EM28XX_VMUX_SVIDEO,
2149 .vmux = SAA7115_SVIDEO3,
2150 .amux = EM28XX_AMUX_LINE_IN,
2151 } },
2152 .buttons = std_snapshot_button,
2153 .leds = terratec_grabby_leds,
2154 },
2155 [EM2860_BOARD_TERRATEC_AV350] = {
2156 .name = "Terratec AV350",
2157 .vchannels = 2,
2158 .tuner_type = TUNER_ABSENT,
2159 .decoder = EM28XX_TVP5150,
2160 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2161 .mute_gpio = terratec_av350_mute_gpio,
2162 .input = { {
2163 .type = EM28XX_VMUX_COMPOSITE,
2164 .vmux = TVP5150_COMPOSITE1,
2165 .amux = EM28XX_AMUX_LINE_IN,
2166 .gpio = terratec_av350_unmute_gpio,
2167
2168 }, {
2169 .type = EM28XX_VMUX_SVIDEO,
2170 .vmux = TVP5150_SVIDEO,
2171 .amux = EM28XX_AMUX_LINE_IN,
2172 .gpio = terratec_av350_unmute_gpio,
2173 } },
2174 },
2175
2176 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
2177 .name = "Elgato Video Capture",
2178 .decoder = EM28XX_SAA711X,
2179 .tuner_type = TUNER_ABSENT, /* Capture only device */
2180 .input = { {
2181 .type = EM28XX_VMUX_COMPOSITE,
2182 .vmux = SAA7115_COMPOSITE0,
2183 .amux = EM28XX_AMUX_LINE_IN,
2184 }, {
2185 .type = EM28XX_VMUX_SVIDEO,
2186 .vmux = SAA7115_SVIDEO3,
2187 .amux = EM28XX_AMUX_LINE_IN,
2188 } },
2189 },
2190
2191 [EM2882_BOARD_EVGA_INDTUBE] = {
2192 .name = "Evga inDtube",
2193 .tuner_type = TUNER_XC2028,
2194 .tuner_gpio = default_tuner_gpio,
2195 .decoder = EM28XX_TVP5150,
2196 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
2197 .mts_firmware = 1,
2198 .has_dvb = 1,
2199 .dvb_gpio = evga_indtube_digital,
2200 .ir_codes = RC_MAP_EVGA_INDTUBE,
2201 .input = { {
2202 .type = EM28XX_VMUX_TELEVISION,
2203 .vmux = TVP5150_COMPOSITE0,
2204 .amux = EM28XX_AMUX_VIDEO,
2205 .gpio = evga_indtube_analog,
2206 }, {
2207 .type = EM28XX_VMUX_COMPOSITE,
2208 .vmux = TVP5150_COMPOSITE1,
2209 .amux = EM28XX_AMUX_LINE_IN,
2210 .gpio = evga_indtube_analog,
2211 }, {
2212 .type = EM28XX_VMUX_SVIDEO,
2213 .vmux = TVP5150_SVIDEO,
2214 .amux = EM28XX_AMUX_LINE_IN,
2215 .gpio = evga_indtube_analog,
2216 } },
2217 },
2218 /*
2219 * eb1a:2868 Empia EM2870 + Philips CU1216L NIM
2220 * (Philips TDA10023 + Infineon TUA6034)
2221 */
2222 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
2223 .name = "Reddo DVB-C USB TV Box",
2224 .tuner_type = TUNER_ABSENT,
2225 .tuner_gpio = reddo_dvb_c_usb_box,
2226 .has_dvb = 1,
2227 },
2228 /*
2229 * 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
2230 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
2231 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2
2232 */
2233 [EM2870_BOARD_KWORLD_A340] = {
2234 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
2235 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
2236 .has_dvb = 1,
2237 .dvb_gpio = kworld_a340_digital,
2238 .tuner_gpio = default_tuner_gpio,
2239 },
2240 /*
2241 * 2013:024f PCTV nanoStick T2 290e.
2242 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2
2243 */
2244 [EM28174_BOARD_PCTV_290E] = {
2245 .name = "PCTV nanoStick T2 290e",
2246 .def_i2c_bus = 1,
2247 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2248 EM28XX_I2C_FREQ_100_KHZ,
2249 .tuner_type = TUNER_ABSENT,
2250 .tuner_gpio = pctv_290e,
2251 .has_dvb = 1,
2252 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2253 },
2254 /*
2255 * 2013:024f PCTV DVB-S2 Stick 460e
2256 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293
2257 */
2258 [EM28174_BOARD_PCTV_460E] = {
2259 .def_i2c_bus = 1,
2260 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2261 EM28XX_I2C_FREQ_400_KHZ,
2262 .name = "PCTV DVB-S2 Stick (460e)",
2263 .tuner_type = TUNER_ABSENT,
2264 .tuner_gpio = pctv_460e,
2265 .has_dvb = 1,
2266 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2267 },
2268 /*
2269 * eb1a:5006 Honestech VIDBOX NW03
2270 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
2271 */
2272 [EM2860_BOARD_HT_VIDBOX_NW03] = {
2273 .name = "Honestech Vidbox NW03",
2274 .tuner_type = TUNER_ABSENT,
2275 .decoder = EM28XX_SAA711X,
2276 .input = { {
2277 .type = EM28XX_VMUX_COMPOSITE,
2278 .vmux = SAA7115_COMPOSITE0,
2279 .amux = EM28XX_AMUX_LINE_IN,
2280 }, {
2281 .type = EM28XX_VMUX_SVIDEO,
2282 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs check */
2283 .amux = EM28XX_AMUX_LINE_IN,
2284 } },
2285 },
2286 /*
2287 * 1b80:e425 MaxMedia UB425-TC
2288 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
2289 */
2290 [EM2874_BOARD_MAXMEDIA_UB425_TC] = {
2291 .name = "MaxMedia UB425-TC",
2292 .tuner_type = TUNER_ABSENT,
2293 .tuner_gpio = maxmedia_ub425_tc,
2294 .has_dvb = 1,
2295 .ir_codes = RC_MAP_REDDO,
2296 .def_i2c_bus = 1,
2297 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2298 EM28XX_I2C_FREQ_400_KHZ,
2299 },
2300 /*
2301 * 2304:0242 PCTV QuatroStick (510e)
2302 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2
2303 */
2304 [EM2884_BOARD_PCTV_510E] = {
2305 .name = "PCTV QuatroStick (510e)",
2306 .tuner_type = TUNER_ABSENT,
2307 .tuner_gpio = pctv_510e,
2308 .has_dvb = 1,
2309 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2310 .def_i2c_bus = 1,
2311 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2312 EM28XX_I2C_FREQ_400_KHZ,
2313 },
2314 /*
2315 * 2013:0251 PCTV QuatroStick nano (520e)
2316 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2
2317 */
2318 [EM2884_BOARD_PCTV_520E] = {
2319 .name = "PCTV QuatroStick nano (520e)",
2320 .tuner_type = TUNER_ABSENT,
2321 .tuner_gpio = pctv_520e,
2322 .has_dvb = 1,
2323 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2324 .def_i2c_bus = 1,
2325 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2326 EM28XX_I2C_FREQ_400_KHZ,
2327 },
2328 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = {
2329 .name = "Terratec Cinergy HTC USB XS",
2330 .has_dvb = 1,
2331 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
2332 .tuner_type = TUNER_ABSENT,
2333 .def_i2c_bus = 1,
2334 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2335 EM28XX_I2C_FREQ_400_KHZ,
2336 },
2337 /*
2338 * 1b80:e1cc Delock 61959
2339 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
2340 * mostly the same as MaxMedia UB-425-TC but different remote
2341 */
2342 [EM2874_BOARD_DELOCK_61959] = {
2343 .name = "Delock 61959",
2344 .tuner_type = TUNER_ABSENT,
2345 .tuner_gpio = maxmedia_ub425_tc,
2346 .has_dvb = 1,
2347 .ir_codes = RC_MAP_DELOCK_61959,
2348 .def_i2c_bus = 1,
2349 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2350 EM28XX_I2C_FREQ_400_KHZ,
2351 },
2352 /*
2353 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2
2354 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
2355 */
2356 [EM2874_BOARD_KWORLD_UB435Q_V2] = {
2357 .name = "KWorld USB ATSC TV Stick UB435-Q V2",
2358 .tuner_type = TUNER_ABSENT,
2359 .has_dvb = 1,
2360 .dvb_gpio = kworld_a340_digital,
2361 .tuner_gpio = default_tuner_gpio,
2362 .def_i2c_bus = 1,
2363 },
2364 /*
2365 * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3
2366 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
2367 */
2368 [EM2874_BOARD_KWORLD_UB435Q_V3] = {
2369 .name = "KWorld USB ATSC TV Stick UB435-Q V3",
2370 .tuner_type = TUNER_ABSENT,
2371 .has_dvb = 1,
2372 .tuner_gpio = kworld_ub435q_v3_digital,
2373 .def_i2c_bus = 1,
2374 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2375 EM28XX_I2C_FREQ_100_KHZ,
2376 .leds = kworld_ub435q_v3_leds,
2377 },
2378 [EM2874_BOARD_PCTV_HD_MINI_80E] = {
2379 .name = "Pinnacle PCTV HD Mini",
2380 .tuner_type = TUNER_ABSENT,
2381 .has_dvb = 1,
2382 .dvb_gpio = em2874_pctv_80e_digital,
2383 .decoder = EM28XX_NODECODER,
2384 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2385 .leds = pctv_80e_leds,
2386 },
2387 /*
2388 * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
2389 * Empia EM2765 + OmniVision OV2640
2390 */
2391 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = {
2392 .name = "SpeedLink Vicious And Devine Laplace webcam",
2393 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ,
2394 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2395 EM28XX_I2C_FREQ_100_KHZ,
2396 .def_i2c_bus = 1,
2397 .tuner_type = TUNER_ABSENT,
2398 .is_webcam = 1,
2399 .input = { {
2400 .type = EM28XX_VMUX_COMPOSITE,
2401 .amux = EM28XX_AMUX_VIDEO,
2402 .gpio = speedlink_vad_laplace_reg_seq,
2403 } },
2404 .buttons = speedlink_vad_laplace_buttons,
2405 .leds = speedlink_vad_laplace_leds,
2406 },
2407 /*
2408 * 2013:0258 PCTV DVB-S2 Stick (461e)
2409 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293
2410 */
2411 [EM28178_BOARD_PCTV_461E] = {
2412 .def_i2c_bus = 1,
2413 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2414 EM28XX_I2C_FREQ_400_KHZ,
2415 .name = "PCTV DVB-S2 Stick (461e)",
2416 .tuner_type = TUNER_ABSENT,
2417 .tuner_gpio = pctv_461e,
2418 .has_dvb = 1,
2419 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2420 },
2421 /*
2422 * 2013:0259 PCTV DVB-S2 Stick (461e_v2)
2423 * Empia EM28178, Montage M88DS3103b, Montage M88TS2022, Allegro A8293
2424 */
2425 [EM28178_BOARD_PCTV_461E_V2] = {
2426 .def_i2c_bus = 1,
2427 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2428 EM28XX_I2C_FREQ_400_KHZ,
2429 .name = "PCTV DVB-S2 Stick (461e v2)",
2430 .tuner_type = TUNER_ABSENT,
2431 .tuner_gpio = pctv_461e,
2432 .has_dvb = 1,
2433 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2434 },
2435 /*
2436 * 2013:025f PCTV tripleStick (292e).
2437 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157
2438 */
2439 [EM28178_BOARD_PCTV_292E] = {
2440 .name = "PCTV tripleStick (292e)",
2441 .def_i2c_bus = 1,
2442 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2443 EM28XX_I2C_FREQ_400_KHZ,
2444 .tuner_type = TUNER_ABSENT,
2445 .tuner_gpio = pctv_292e,
2446 .has_dvb = 1,
2447 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2448 },
2449 [EM2861_BOARD_LEADTEK_VC100] = {
2450 .name = "Leadtek VC100",
2451 .tuner_type = TUNER_ABSENT, /* Capture only device */
2452 .decoder = EM28XX_TVP5150,
2453 .input = { {
2454 .type = EM28XX_VMUX_COMPOSITE,
2455 .vmux = TVP5150_COMPOSITE1,
2456 .amux = EM28XX_AMUX_LINE_IN,
2457 }, {
2458 .type = EM28XX_VMUX_SVIDEO,
2459 .vmux = TVP5150_SVIDEO,
2460 .amux = EM28XX_AMUX_LINE_IN,
2461 } },
2462 },
2463 /*
2464 * eb1a:8179 Terratec Cinergy T2 Stick HD.
2465 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146
2466 */
2467 [EM28178_BOARD_TERRATEC_T2_STICK_HD] = {
2468 .name = "Terratec Cinergy T2 Stick HD",
2469 .def_i2c_bus = 1,
2470 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2471 EM28XX_I2C_FREQ_400_KHZ,
2472 .tuner_type = TUNER_ABSENT,
2473 .tuner_gpio = terratec_t2_stick_hd,
2474 .has_dvb = 1,
2475 .ir_codes = RC_MAP_TERRATEC_SLIM_2,
2476 },
2477
2478 /*
2479 * 3275:0085 PLEX PX-BCUD.
2480 * Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042
2481 */
2482 [EM28178_BOARD_PLEX_PX_BCUD] = {
2483 .name = "PLEX PX-BCUD",
2484 .xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ,
2485 .def_i2c_bus = 1,
2486 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
2487 .tuner_type = TUNER_ABSENT,
2488 .tuner_gpio = plex_px_bcud,
2489 .has_dvb = 1,
2490 },
2491 /*
2492 * 2040:0265 Hauppauge WinTV-dualHD (DVB version) Isoc.
2493 * 2040:8265 Hauppauge WinTV-dualHD (DVB version) Bulk.
2494 * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157
2495 */
2496 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = {
2497 .name = "Hauppauge WinTV-dualHD DVB",
2498 .def_i2c_bus = 1,
2499 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2500 EM28XX_I2C_FREQ_400_KHZ,
2501 .tuner_type = TUNER_SI2157,
2502 .tuner_gpio = hauppauge_dualhd_dvb,
2503 .has_dvb = 1,
2504 .has_dual_ts = 1,
2505 .ir_codes = RC_MAP_HAUPPAUGE,
2506 .leds = hauppauge_dualhd_leds,
2507 .input = { {
2508 .type = EM28XX_VMUX_COMPOSITE,
2509 .vmux = TVP5150_COMPOSITE1,
2510 .amux = EM28XX_AMUX_LINE_IN,
2511 } },
2512 },
2513 /*
2514 * 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Isoc.
2515 * 2040:826d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Bulk.
2516 * Empia EM28274, 2x LG LGDT3306A, 2x Silicon Labs Si2157
2517 */
2518 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595] = {
2519 .name = "Hauppauge WinTV-dualHD 01595 ATSC/QAM",
2520 .def_i2c_bus = 1,
2521 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2522 EM28XX_I2C_FREQ_400_KHZ,
2523 .tuner_type = TUNER_ABSENT,
2524 .tuner_gpio = hauppauge_dualhd_dvb,
2525 .has_dvb = 1,
2526 .has_dual_ts = 1,
2527 .ir_codes = RC_MAP_HAUPPAUGE,
2528 .leds = hauppauge_dualhd_leds,
2529 },
2530 /*
2531 * 1b80:e349 Magix USB Videowandler-2
2532 * (same chips as Honestech VIDBOX NW03)
2533 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
2534 */
2535 [EM2861_BOARD_MAGIX_VIDEOWANDLER2] = {
2536 .name = "Magix USB Videowandler-2",
2537 .tuner_type = TUNER_ABSENT,
2538 .decoder = EM28XX_SAA711X,
2539 .input = { {
2540 .type = EM28XX_VMUX_COMPOSITE,
2541 .vmux = SAA7115_COMPOSITE0,
2542 .amux = EM28XX_AMUX_LINE_IN,
2543 }, {
2544 .type = EM28XX_VMUX_SVIDEO,
2545 .amux = EM28XX_AMUX_LINE_IN,
2546 } },
2547 },
2548 /*
2549 * 1f4d:1abe MyGica iGrabber
2550 * (same as several other EM2860 devices)
2551 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
2552 */
2553 [EM2860_BOARD_MYGICA_IGRABBER] = {
2554 .name = "MyGica iGrabber",
2555 .vchannels = 2,
2556 .tuner_type = TUNER_ABSENT,
2557 .decoder = EM28XX_SAA711X,
2558 .input = { {
2559 .type = EM28XX_VMUX_COMPOSITE,
2560 .vmux = SAA7115_COMPOSITE0,
2561 .amux = EM28XX_AMUX_LINE_IN,
2562 }, {
2563 .type = EM28XX_VMUX_SVIDEO,
2564 .vmux = SAA7115_SVIDEO3,
2565 .amux = EM28XX_AMUX_LINE_IN,
2566 } },
2567 },
2568 /* 2040:826d Hauppauge USB QuadHD
2569 * Empia 28274, Max Linear 692 ATSC combo demod/tuner
2570 */
2571 [EM2874_BOARD_HAUPPAUGE_USB_QUADHD] = {
2572 .name = "Hauppauge USB QuadHD ATSC",
2573 .def_i2c_bus = 1,
2574 .has_dual_ts = 1,
2575 .has_dvb = 1,
2576 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
2577 .tuner_type = TUNER_ABSENT,
2578 .tuner_gpio = hauppauge_usb_quadhd_atsc_reg_seq,
2579 .leds = hauppauge_usb_quadhd_leds,
2580 },
2581 };
2582 EXPORT_SYMBOL_GPL(em28xx_boards);
2583
2584 static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
2585
2586 /* table of devices that work with this driver */
2587 struct usb_device_id em28xx_id_table[] = {
2588 { USB_DEVICE(0xeb1a, 0x2750),
2589 .driver_info = EM2750_BOARD_UNKNOWN },
2590 { USB_DEVICE(0xeb1a, 0x2751),
2591 .driver_info = EM2750_BOARD_UNKNOWN },
2592 { USB_DEVICE(0xeb1a, 0x2800),
2593 .driver_info = EM2800_BOARD_UNKNOWN },
2594 { USB_DEVICE(0xeb1a, 0x2710),
2595 .driver_info = EM2820_BOARD_UNKNOWN },
2596 { USB_DEVICE(0xeb1a, 0x2820),
2597 .driver_info = EM2820_BOARD_UNKNOWN },
2598 { USB_DEVICE(0xeb1a, 0x2821),
2599 .driver_info = EM2820_BOARD_UNKNOWN },
2600 { USB_DEVICE(0xeb1a, 0x2860),
2601 .driver_info = EM2820_BOARD_UNKNOWN },
2602 { USB_DEVICE(0xeb1a, 0x2861),
2603 .driver_info = EM2820_BOARD_UNKNOWN },
2604 { USB_DEVICE(0xeb1a, 0x2862),
2605 .driver_info = EM2820_BOARD_UNKNOWN },
2606 { USB_DEVICE(0xeb1a, 0x2863),
2607 .driver_info = EM2820_BOARD_UNKNOWN },
2608 { USB_DEVICE(0xeb1a, 0x2870),
2609 .driver_info = EM2820_BOARD_UNKNOWN },
2610 { USB_DEVICE(0xeb1a, 0x2881),
2611 .driver_info = EM2820_BOARD_UNKNOWN },
2612 { USB_DEVICE(0xeb1a, 0x2883), /* used by :Zolid Hybrid Tv Stick */
2613 .driver_info = EM2820_BOARD_UNKNOWN },
2614 { USB_DEVICE(0xeb1a, 0x2868),
2615 .driver_info = EM2820_BOARD_UNKNOWN },
2616 { USB_DEVICE(0xeb1a, 0x2875),
2617 .driver_info = EM2820_BOARD_UNKNOWN },
2618 { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */
2619 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2620 { USB_DEVICE(0xeb1a, 0xe300),
2621 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
2622 { USB_DEVICE(0xeb1a, 0xe303),
2623 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
2624 { USB_DEVICE(0xeb1a, 0xe305),
2625 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
2626 { USB_DEVICE(0xeb1a, 0xe310),
2627 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
2628 { USB_DEVICE(0xeb1a, 0xa313),
2629 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
2630 { USB_DEVICE(0xeb1a, 0xa316),
2631 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
2632 { USB_DEVICE(0xeb1a, 0xe320),
2633 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
2634 { USB_DEVICE(0xeb1a, 0xe323),
2635 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
2636 { USB_DEVICE(0xeb1a, 0xe350),
2637 .driver_info = EM2870_BOARD_KWORLD_350U },
2638 { USB_DEVICE(0xeb1a, 0xe355),
2639 .driver_info = EM2870_BOARD_KWORLD_355U },
2640 { USB_DEVICE(0xeb1a, 0x2801),
2641 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
2642 { USB_DEVICE(0xeb1a, 0xe357),
2643 .driver_info = EM2870_BOARD_KWORLD_355U },
2644 { USB_DEVICE(0xeb1a, 0xe359),
2645 .driver_info = EM2870_BOARD_KWORLD_355U },
2646 { USB_DEVICE(0x1b80, 0xe302), /* Kaiser Baas Video to DVD maker */
2647 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2648 { USB_DEVICE(0x1b80, 0xe304), /* Kworld DVD Maker 2 */
2649 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2650 { USB_DEVICE(0x0ccd, 0x0036),
2651 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
2652 { USB_DEVICE(0x0ccd, 0x004c),
2653 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
2654 { USB_DEVICE(0x0ccd, 0x004f),
2655 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
2656 { USB_DEVICE(0x0ccd, 0x005e),
2657 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2658 { USB_DEVICE(0x0ccd, 0x0042),
2659 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2660 { USB_DEVICE(0x0ccd, 0x0043),
2661 .driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 },
2662 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */
2663 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
2664 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */
2665 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
2666 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */
2667 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2668 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */
2669 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2670 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */
2671 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2672 { USB_DEVICE(0x0ccd, 0x10b2), /* H6 */
2673 .driver_info = EM2884_BOARD_TERRATEC_H6 },
2674 { USB_DEVICE(0x0ccd, 0x0084),
2675 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
2676 { USB_DEVICE(0x0ccd, 0x0096),
2677 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2678 { USB_DEVICE(0x0ccd, 0x10AF),
2679 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2680 { USB_DEVICE(0x0ccd, 0x00b2),
2681 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
2682 { USB_DEVICE(0x0fd9, 0x0018),
2683 .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 },
2684 { USB_DEVICE(0x0fd9, 0x0033),
2685 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE },
2686 { USB_DEVICE(0x185b, 0x2870),
2687 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
2688 { USB_DEVICE(0x185b, 0x2041),
2689 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
2690 { USB_DEVICE(0x2040, 0x4200),
2691 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2692 { USB_DEVICE(0x2040, 0x4201),
2693 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2694 { USB_DEVICE(0x2040, 0x6500),
2695 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
2696 { USB_DEVICE(0x2040, 0x6502),
2697 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
2698 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
2699 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2700 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
2701 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2702 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
2703 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2704 { USB_DEVICE(0x2040, 0x651f),
2705 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
2706 { USB_DEVICE(0x2040, 0x0265),
2707 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
2708 { USB_DEVICE(0x2040, 0x8265),
2709 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
2710 { USB_DEVICE(0x2040, 0x026d),
2711 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 },
2712 { USB_DEVICE(0x2040, 0x826d),
2713 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 },
2714 { USB_DEVICE(0x2040, 0x846d),
2715 .driver_info = EM2874_BOARD_HAUPPAUGE_USB_QUADHD },
2716 { USB_DEVICE(0x0438, 0xb002),
2717 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
2718 { USB_DEVICE(0x2001, 0xf112),
2719 .driver_info = EM2820_BOARD_DLINK_USB_TV },
2720 { USB_DEVICE(0x2304, 0x0207),
2721 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2722 { USB_DEVICE(0x2304, 0x0208),
2723 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
2724 { USB_DEVICE(0x2304, 0x021a),
2725 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2726 { USB_DEVICE(0x2304, 0x0226),
2727 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
2728 { USB_DEVICE(0x2304, 0x0227),
2729 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
2730 { USB_DEVICE(0x2304, 0x023f),
2731 .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E },
2732 { USB_DEVICE(0x0413, 0x6023),
2733 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
2734 { USB_DEVICE(0x093b, 0xa003),
2735 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2736 { USB_DEVICE(0x093b, 0xa005),
2737 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
2738 { USB_DEVICE(0x04bb, 0x0515),
2739 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
2740 { USB_DEVICE(0xeb1a, 0x50a6),
2741 .driver_info = EM2860_BOARD_GADMEI_UTV330 },
2742 { USB_DEVICE(0x1b80, 0xa340),
2743 .driver_info = EM2870_BOARD_KWORLD_A340 },
2744 { USB_DEVICE(0x1b80, 0xe346),
2745 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 },
2746 { USB_DEVICE(0x1b80, 0xe34c),
2747 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 },
2748 { USB_DEVICE(0x2013, 0x024f),
2749 .driver_info = EM28174_BOARD_PCTV_290E },
2750 { USB_DEVICE(0x2013, 0x024c),
2751 .driver_info = EM28174_BOARD_PCTV_460E },
2752 { USB_DEVICE(0x2040, 0x1605),
2753 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
2754 { USB_DEVICE(0x1b80, 0xe755),
2755 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO },
2756 { USB_DEVICE(0xeb1a, 0x5006),
2757 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
2758 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
2759 .driver_info = EM2860_BOARD_EASYCAP },
2760 { USB_DEVICE(0x1b80, 0xe425),
2761 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
2762 { USB_DEVICE(0x1f4d, 0x1abe),
2763 .driver_info = EM2860_BOARD_MYGICA_IGRABBER },
2764 { USB_DEVICE(0x2304, 0x0242),
2765 .driver_info = EM2884_BOARD_PCTV_510E },
2766 { USB_DEVICE(0x2013, 0x0251),
2767 .driver_info = EM2884_BOARD_PCTV_520E },
2768 { USB_DEVICE(0x1b80, 0xe1cc),
2769 .driver_info = EM2874_BOARD_DELOCK_61959 },
2770 { USB_DEVICE(0x1ae7, 0x9003),
2771 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
2772 { USB_DEVICE(0x1ae7, 0x9004),
2773 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
2774 { USB_DEVICE(0x2013, 0x0258),
2775 .driver_info = EM28178_BOARD_PCTV_461E },
2776 { USB_DEVICE(0x2013, 0x8258), /* Bulk transport 461e */
2777 .driver_info = EM28178_BOARD_PCTV_461E },
2778 { USB_DEVICE(0x2013, 0x0461),
2779 .driver_info = EM28178_BOARD_PCTV_461E_V2 },
2780 { USB_DEVICE(0x2013, 0x8461), /* Bulk transport 461e v2 */
2781 .driver_info = EM28178_BOARD_PCTV_461E_V2 },
2782 { USB_DEVICE(0x2013, 0x0259),
2783 .driver_info = EM28178_BOARD_PCTV_461E_V2 },
2784 { USB_DEVICE(0x2013, 0x025f),
2785 .driver_info = EM28178_BOARD_PCTV_292E },
2786 { USB_DEVICE(0x2013, 0x0264), /* Hauppauge WinTV-soloHD 292e SE */
2787 .driver_info = EM28178_BOARD_PCTV_292E },
2788 { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD Isoc */
2789 .driver_info = EM28178_BOARD_PCTV_292E },
2790 { USB_DEVICE(0x2040, 0x8264), /* Hauppauge OEM Generic WinTV-soloHD Bulk */
2791 .driver_info = EM28178_BOARD_PCTV_292E },
2792 { USB_DEVICE(0x2040, 0x8268), /* Hauppauge Retail WinTV-soloHD Bulk */
2793 .driver_info = EM28178_BOARD_PCTV_292E },
2794 { USB_DEVICE(0x0413, 0x6f07),
2795 .driver_info = EM2861_BOARD_LEADTEK_VC100 },
2796 { USB_DEVICE(0xeb1a, 0x8179),
2797 .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD },
2798 { USB_DEVICE(0x3275, 0x0085),
2799 .driver_info = EM28178_BOARD_PLEX_PX_BCUD },
2800 { USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech svid2usb23 / Raygo R12-41373 */
2801 .driver_info = EM2860_BOARD_TVP5150_REFERENCE_DESIGN },
2802 { USB_DEVICE(0x1b80, 0xe349), /* Magix USB Videowandler-2 */
2803 .driver_info = EM2861_BOARD_MAGIX_VIDEOWANDLER2 },
2804 { },
2805 };
2806 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
2807
2808 /*
2809 * EEPROM hash table for devices with generic USB IDs
2810 */
2811 static const struct em28xx_hash_table em28xx_eeprom_hash[] = {
2812 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
2813 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
2814 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
2815 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
2816 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
2817 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
2818 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
2819 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
2820 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
2821 {0x85dd871e, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028},
2822 };
2823
2824 /* I2C devicelist hash table for devices with generic USB IDs */
2825 static const struct em28xx_hash_table em28xx_i2c_hash[] = {
2826 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
2827 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
2828 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
2829 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
2830 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
2831 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
2832 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
2833 {0x27e10080, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028},
2834 };
2835
2836 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */
2837
em28xx_tuner_callback(void * ptr,int component,int command,int arg)2838 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
2839 {
2840 struct em28xx_i2c_bus *i2c_bus = ptr;
2841 struct em28xx *dev = i2c_bus->dev;
2842 int rc = 0;
2843
2844 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
2845 return 0;
2846
2847 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
2848 return 0;
2849
2850 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
2851
2852 return rc;
2853 }
2854 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
2855
em28xx_set_xclk_i2c_speed(struct em28xx * dev)2856 static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev)
2857 {
2858 const struct em28xx_board *board = &em28xx_boards[dev->model];
2859 u8 xclk = board->xclk, i2c_speed = board->i2c_speed;
2860
2861 /*
2862 * Those are the default values for the majority of boards
2863 * Use those values if not specified otherwise at boards entry
2864 */
2865 if (!xclk)
2866 xclk = EM28XX_XCLK_IR_RC5_MODE |
2867 EM28XX_XCLK_FREQUENCY_12MHZ;
2868
2869 em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk);
2870
2871 if (!i2c_speed)
2872 i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2873 EM28XX_I2C_FREQ_100_KHZ;
2874
2875 dev->i2c_speed = i2c_speed & 0x03;
2876
2877 if (!dev->board.is_em2800)
2878 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, i2c_speed);
2879 msleep(50);
2880 }
2881
em28xx_set_model(struct em28xx * dev)2882 static inline void em28xx_set_model(struct em28xx *dev)
2883 {
2884 dev->board = em28xx_boards[dev->model];
2885 dev->has_msp34xx = dev->board.has_msp34xx;
2886 dev->is_webcam = dev->board.is_webcam;
2887
2888 em28xx_set_xclk_i2c_speed(dev);
2889
2890 /* Should be initialized early, for I2C to work */
2891 dev->def_i2c_bus = dev->board.def_i2c_bus;
2892 }
2893
2894 /*
2895 * Wait until AC97_RESET reports the expected value reliably before proceeding.
2896 * We also check that two unrelated registers accesses don't return the same
2897 * value to avoid premature return.
2898 * This procedure helps ensuring AC97 register accesses are reliable.
2899 */
em28xx_wait_until_ac97_features_equals(struct em28xx * dev,int expected_feat)2900 static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev,
2901 int expected_feat)
2902 {
2903 unsigned long timeout = jiffies + msecs_to_jiffies(2000);
2904 int feat, powerdown;
2905
2906 while (time_is_after_jiffies(timeout)) {
2907 feat = em28xx_read_ac97(dev, AC97_RESET);
2908 if (feat < 0)
2909 return feat;
2910
2911 powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN);
2912 if (powerdown < 0)
2913 return powerdown;
2914
2915 if (feat == expected_feat && feat != powerdown)
2916 return 0;
2917
2918 msleep(50);
2919 }
2920
2921 dev_warn(&dev->intf->dev, "AC97 registers access is not reliable !\n");
2922 return -ETIMEDOUT;
2923 }
2924
2925 /*
2926 * Since em28xx_pre_card_setup() requires a proper dev->model,
2927 * this won't work for boards with generic PCI IDs
2928 */
em28xx_pre_card_setup(struct em28xx * dev)2929 static void em28xx_pre_card_setup(struct em28xx *dev)
2930 {
2931 /*
2932 * Set the initial XCLK and I2C clock values based on the board
2933 * definition
2934 */
2935 em28xx_set_xclk_i2c_speed(dev);
2936
2937 /* request some modules */
2938 switch (dev->model) {
2939 case EM2861_BOARD_PLEXTOR_PX_TV100U:
2940 /* Sets the msp34xx I2S speed */
2941 dev->i2s_speed = 2048000;
2942 break;
2943 case EM2861_BOARD_KWORLD_PVRTV_300U:
2944 case EM2880_BOARD_KWORLD_DVB_305U:
2945 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d);
2946 usleep_range(10000, 11000);
2947 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d);
2948 usleep_range(10000, 11000);
2949 break;
2950 case EM2870_BOARD_COMPRO_VIDEOMATE:
2951 /*
2952 * TODO: someone can do some cleanup here...
2953 * not everything's needed
2954 */
2955 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2956 usleep_range(10000, 11000);
2957 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2958 usleep_range(10000, 11000);
2959 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2960 msleep(70);
2961 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
2962 msleep(70);
2963 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc);
2964 msleep(70);
2965 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
2966 msleep(70);
2967 break;
2968 case EM2870_BOARD_TERRATEC_XS_MT2060:
2969 /*
2970 * this device needs some gpio writes to get the DVB-T
2971 * demod work
2972 */
2973 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2974 msleep(70);
2975 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
2976 msleep(70);
2977 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2978 msleep(70);
2979 break;
2980 case EM2870_BOARD_PINNACLE_PCTV_DVB:
2981 /*
2982 * this device needs some gpio writes to get the
2983 * DVB-T demod work
2984 */
2985 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2986 msleep(70);
2987 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
2988 msleep(70);
2989 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2990 msleep(70);
2991 break;
2992 case EM2820_BOARD_GADMEI_UTV310:
2993 case EM2820_BOARD_MSI_VOX_USB_2:
2994 /* enables audio for that devices */
2995 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2996 break;
2997
2998 case EM2882_BOARD_KWORLD_ATSC_315U:
2999 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
3000 usleep_range(10000, 11000);
3001 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
3002 usleep_range(10000, 11000);
3003 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
3004 usleep_range(10000, 11000);
3005 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
3006 usleep_range(10000, 11000);
3007 break;
3008
3009 case EM2860_BOARD_KAIOMY_TVNPC_U2:
3010 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
3011 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
3012 em28xx_write_regs(dev, 0x0d, "\x42", 1);
3013 em28xx_write_regs(dev, 0x08, "\xfd", 1);
3014 usleep_range(10000, 11000);
3015 em28xx_write_regs(dev, 0x08, "\xff", 1);
3016 usleep_range(10000, 11000);
3017 em28xx_write_regs(dev, 0x08, "\x7f", 1);
3018 usleep_range(10000, 11000);
3019 em28xx_write_regs(dev, 0x08, "\x6b", 1);
3020
3021 break;
3022 case EM2860_BOARD_EASYCAP:
3023 em28xx_write_regs(dev, 0x08, "\xf8", 1);
3024 break;
3025
3026 case EM2820_BOARD_IODATA_GVMVP_SZ:
3027 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
3028 msleep(70);
3029 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
3030 usleep_range(10000, 11000);
3031 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
3032 msleep(70);
3033 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
3034 msleep(70);
3035 break;
3036
3037 case EM2860_BOARD_TERRATEC_GRABBY:
3038 /*
3039 * HACK?: Ensure AC97 register reading is reliable before
3040 * proceeding. In practice, this will wait about 1.6 seconds.
3041 */
3042 em28xx_wait_until_ac97_features_equals(dev, 0x6a90);
3043 break;
3044 }
3045
3046 em28xx_gpio_set(dev, dev->board.tuner_gpio);
3047 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
3048
3049 /* Unlock device */
3050 em28xx_set_mode(dev, EM28XX_SUSPEND);
3051 }
3052
em28xx_hint_board(struct em28xx * dev)3053 static int em28xx_hint_board(struct em28xx *dev)
3054 {
3055 int i;
3056
3057 if (dev->is_webcam) {
3058 if (dev->em28xx_sensor == EM28XX_MT9V011) {
3059 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
3060 } else if (dev->em28xx_sensor == EM28XX_MT9M001 ||
3061 dev->em28xx_sensor == EM28XX_MT9M111) {
3062 dev->model = EM2750_BOARD_UNKNOWN;
3063 }
3064 /* FIXME: IMPROVE ! */
3065
3066 return 0;
3067 }
3068
3069 /*
3070 * HINT method: EEPROM
3071 *
3072 * This method works only for boards with eeprom.
3073 * Uses a hash of all eeprom bytes. The hash should be
3074 * unique for a vendor/tuner pair.
3075 * There are a high chance that tuners for different
3076 * video standards produce different hashes.
3077 */
3078 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
3079 if (dev->hash == em28xx_eeprom_hash[i].hash) {
3080 dev->model = em28xx_eeprom_hash[i].model;
3081 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
3082
3083 dev_err(&dev->intf->dev,
3084 "Your board has no unique USB ID.\n"
3085 "A hint were successfully done, based on eeprom hash.\n"
3086 "This method is not 100%% failproof.\n"
3087 "If the board were misdetected, please email this log to:\n"
3088 "\tV4L Mailing List <linux-media@vger.kernel.org>\n"
3089 "Board detected as %s\n",
3090 em28xx_boards[dev->model].name);
3091
3092 return 0;
3093 }
3094 }
3095
3096 /*
3097 * HINT method: I2C attached devices
3098 *
3099 * This method works for all boards.
3100 * Uses a hash of i2c scanned devices.
3101 * Devices with the same i2c attached chips will
3102 * be considered equal.
3103 * This method is less precise than the eeprom one.
3104 */
3105
3106 /* user did not request i2c scanning => do it now */
3107 if (!dev->i2c_hash)
3108 em28xx_do_i2c_scan(dev, dev->def_i2c_bus);
3109
3110 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
3111 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
3112 dev->model = em28xx_i2c_hash[i].model;
3113 dev->tuner_type = em28xx_i2c_hash[i].tuner;
3114 dev_err(&dev->intf->dev,
3115 "Your board has no unique USB ID.\n"
3116 "A hint were successfully done, based on i2c devicelist hash.\n"
3117 "This method is not 100%% failproof.\n"
3118 "If the board were misdetected, please email this log to:\n"
3119 "\tV4L Mailing List <linux-media@vger.kernel.org>\n"
3120 "Board detected as %s\n",
3121 em28xx_boards[dev->model].name);
3122
3123 return 0;
3124 }
3125 }
3126
3127 dev_err(&dev->intf->dev,
3128 "Your board has no unique USB ID and thus need a hint to be detected.\n"
3129 "You may try to use card=<n> insmod option to workaround that.\n"
3130 "Please send an email with this log to:\n"
3131 "\tV4L Mailing List <linux-media@vger.kernel.org>\n"
3132 "Board eeprom hash is 0x%08lx\n"
3133 "Board i2c devicelist hash is 0x%08lx\n",
3134 dev->hash, dev->i2c_hash);
3135
3136 dev_err(&dev->intf->dev,
3137 "Here is a list of valid choices for the card=<n> insmod option:\n");
3138 for (i = 0; i < em28xx_bcount; i++) {
3139 dev_err(&dev->intf->dev,
3140 " card=%d -> %s\n", i, em28xx_boards[i].name);
3141 }
3142 return -1;
3143 }
3144
em28xx_card_setup(struct em28xx * dev)3145 static void em28xx_card_setup(struct em28xx *dev)
3146 {
3147 int i, j, idx;
3148 bool duplicate_entry;
3149
3150 /*
3151 * If the device can be a webcam, seek for a sensor.
3152 * If sensor is not found, then it isn't a webcam.
3153 */
3154 if (dev->is_webcam) {
3155 em28xx_detect_sensor(dev);
3156 if (dev->em28xx_sensor == EM28XX_NOSENSOR)
3157 /* NOTE: error/unknown sensor/no sensor */
3158 dev->is_webcam = 0;
3159 }
3160
3161 switch (dev->model) {
3162 case EM2750_BOARD_UNKNOWN:
3163 case EM2820_BOARD_UNKNOWN:
3164 case EM2800_BOARD_UNKNOWN:
3165 /*
3166 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
3167 *
3168 * This occurs because they share identical USB vendor and
3169 * product IDs.
3170 *
3171 * What we do here is look up the EEPROM hash of the K-WORLD
3172 * and if it is found then we decide that we do not have
3173 * a DIGIVOX and reset the device to the K-WORLD instead.
3174 *
3175 * This solution is only valid if they do not share eeprom
3176 * hash identities which has not been determined as yet.
3177 */
3178 if (em28xx_hint_board(dev) < 0) {
3179 dev_err(&dev->intf->dev, "Board not discovered\n");
3180 } else {
3181 em28xx_set_model(dev);
3182 em28xx_pre_card_setup(dev);
3183 }
3184 break;
3185 default:
3186 em28xx_set_model(dev);
3187 }
3188
3189 dev_info(&dev->intf->dev, "Identified as %s (card=%d)\n",
3190 dev->board.name, dev->model);
3191
3192 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
3193
3194 /* request some modules */
3195 switch (dev->model) {
3196 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
3197 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
3198 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
3199 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
3200 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
3201 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
3202 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB:
3203 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595:
3204 {
3205 struct tveeprom tv;
3206
3207 if (!dev->eedata)
3208 break;
3209 #if defined(CONFIG_MODULES) && defined(MODULE)
3210 request_module("tveeprom");
3211 #endif
3212 /* Call first TVeeprom */
3213
3214 tveeprom_hauppauge_analog(&tv, dev->eedata);
3215
3216 dev->tuner_type = tv.tuner_type;
3217
3218 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) {
3219 dev->i2s_speed = 2048000;
3220 dev->has_msp34xx = 1;
3221 }
3222 break;
3223 }
3224 case EM2882_BOARD_KWORLD_ATSC_315U:
3225 em28xx_write_reg(dev, 0x0d, 0x42);
3226 usleep_range(10000, 11000);
3227 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
3228 usleep_range(10000, 11000);
3229 break;
3230 case EM2820_BOARD_KWORLD_PVRTV2800RF:
3231 /* GPIO enables sound on KWORLD PVR TV 2800RF */
3232 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9);
3233 break;
3234 case EM2820_BOARD_UNKNOWN:
3235 case EM2800_BOARD_UNKNOWN:
3236 /*
3237 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
3238 *
3239 * This occurs because they share identical USB vendor and
3240 * product IDs.
3241 *
3242 * What we do here is look up the EEPROM hash of the K-WORLD
3243 * and if it is found then we decide that we do not have
3244 * a DIGIVOX and reset the device to the K-WORLD instead.
3245 *
3246 * This solution is only valid if they do not share eeprom
3247 * hash identities which has not been determined as yet.
3248 */
3249 case EM2880_BOARD_MSI_DIGIVOX_AD:
3250 if (!em28xx_hint_board(dev))
3251 em28xx_set_model(dev);
3252
3253 /*
3254 * In cases where we had to use a board hint, the call to
3255 * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
3256 * so make the call now so the analog GPIOs are set properly
3257 * before probing the i2c bus.
3258 */
3259 em28xx_gpio_set(dev, dev->board.tuner_gpio);
3260 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
3261 break;
3262
3263 /*
3264 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
3265 *
3266 * This occurs because they share identical USB vendor and
3267 * product IDs.
3268 *
3269 * What we do here is look up the EEPROM hash of the Dikom
3270 * and if it is found then we decide that we do not have
3271 * a Kworld and reset the device to the Dikom instead.
3272 *
3273 * This solution is only valid if they do not share eeprom
3274 * hash identities which has not been determined as yet.
3275 */
3276 case EM2882_BOARD_KWORLD_VS_DVBT:
3277 if (!em28xx_hint_board(dev))
3278 em28xx_set_model(dev);
3279
3280 /*
3281 * In cases where we had to use a board hint, the call to
3282 * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
3283 * so make the call now so the analog GPIOs are set properly
3284 * before probing the i2c bus.
3285 */
3286 em28xx_gpio_set(dev, dev->board.tuner_gpio);
3287 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
3288 break;
3289 }
3290
3291 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
3292 dev_err(&dev->intf->dev,
3293 "\n\n"
3294 "The support for this board weren't valid yet.\n"
3295 "Please send a report of having this working\n"
3296 "not to V4L mailing list (and/or to other addresses)\n\n");
3297 }
3298
3299 /* Free eeprom data memory */
3300 kfree(dev->eedata);
3301 dev->eedata = NULL;
3302
3303 /* Allow override tuner type by a module parameter */
3304 if (tuner >= 0)
3305 dev->tuner_type = tuner;
3306
3307 /*
3308 * Dynamically generate a list of valid audio inputs for this
3309 * specific board, mapping them via enum em28xx_amux.
3310 */
3311
3312 idx = 0;
3313 for (i = 0; i < MAX_EM28XX_INPUT; i++) {
3314 if (!INPUT(i)->type)
3315 continue;
3316
3317 /* Skip already mapped audio inputs */
3318 duplicate_entry = false;
3319 for (j = 0; j < idx; j++) {
3320 if (INPUT(i)->amux == dev->amux_map[j]) {
3321 duplicate_entry = true;
3322 break;
3323 }
3324 }
3325 if (duplicate_entry)
3326 continue;
3327
3328 dev->amux_map[idx++] = INPUT(i)->amux;
3329 }
3330 for (; idx < MAX_EM28XX_INPUT; idx++)
3331 dev->amux_map[idx] = EM28XX_AMUX_UNUSED;
3332 }
3333
em28xx_setup_xc3028(struct em28xx * dev,struct xc2028_ctrl * ctl)3334 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
3335 {
3336 memset(ctl, 0, sizeof(*ctl));
3337
3338 ctl->fname = XC2028_DEFAULT_FIRMWARE;
3339 ctl->max_len = 64;
3340 ctl->mts = em28xx_boards[dev->model].mts_firmware;
3341
3342 switch (dev->model) {
3343 case EM2880_BOARD_EMPIRE_DUAL_TV:
3344 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
3345 case EM2882_BOARD_TERRATEC_HYBRID_XS:
3346 case EM2880_BOARD_TERRATEC_HYBRID_XS:
3347 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
3348 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
3349 case EM2882_BOARD_ZOLID_HYBRID_TV_STICK:
3350 ctl->demod = XC3028_FE_ZARLINK456;
3351 break;
3352 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
3353 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
3354 ctl->demod = XC3028_FE_DEFAULT;
3355 break;
3356 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
3357 ctl->demod = XC3028_FE_DEFAULT;
3358 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
3359 break;
3360 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
3361 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
3362 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
3363 /* FIXME: Better to specify the needed IF */
3364 ctl->demod = XC3028_FE_DEFAULT;
3365 break;
3366 case EM2883_BOARD_KWORLD_HYBRID_330U:
3367 case EM2882_BOARD_DIKOM_DK300:
3368 case EM2882_BOARD_KWORLD_VS_DVBT:
3369 ctl->demod = XC3028_FE_CHINA;
3370 ctl->fname = XC2028_DEFAULT_FIRMWARE;
3371 break;
3372 case EM2882_BOARD_EVGA_INDTUBE:
3373 ctl->demod = XC3028_FE_CHINA;
3374 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
3375 break;
3376 default:
3377 ctl->demod = XC3028_FE_OREN538;
3378 }
3379 }
3380 EXPORT_SYMBOL_GPL(em28xx_setup_xc3028);
3381
request_module_async(struct work_struct * work)3382 static void request_module_async(struct work_struct *work)
3383 {
3384 struct em28xx *dev = container_of(work,
3385 struct em28xx, request_module_wk);
3386
3387 /*
3388 * The em28xx extensions can be modules or builtin. If the
3389 * modules are already loaded or are built in, those extensions
3390 * can be initialised right now. Otherwise, the module init
3391 * code will do it.
3392 */
3393
3394 /*
3395 * Devices with an audio-only intf also have a V4L/DVB/RC
3396 * intf. Don't register extensions twice on those devices.
3397 */
3398 if (dev->is_audio_only) {
3399 #if defined(CONFIG_MODULES) && defined(MODULE)
3400 request_module("em28xx-alsa");
3401 #endif
3402 return;
3403 }
3404
3405 em28xx_init_extension(dev);
3406
3407 #if defined(CONFIG_MODULES) && defined(MODULE)
3408 if (dev->has_video)
3409 request_module("em28xx-v4l");
3410 if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS)
3411 request_module("snd-usb-audio");
3412 else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR)
3413 request_module("em28xx-alsa");
3414 if (dev->board.has_dvb)
3415 request_module("em28xx-dvb");
3416 if (dev->board.buttons ||
3417 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir))
3418 request_module("em28xx-rc");
3419 #endif /* CONFIG_MODULES */
3420 }
3421
request_modules(struct em28xx * dev)3422 static void request_modules(struct em28xx *dev)
3423 {
3424 INIT_WORK(&dev->request_module_wk, request_module_async);
3425 schedule_work(&dev->request_module_wk);
3426 }
3427
flush_request_modules(struct em28xx * dev)3428 static void flush_request_modules(struct em28xx *dev)
3429 {
3430 flush_work(&dev->request_module_wk);
3431 }
3432
em28xx_media_device_init(struct em28xx * dev,struct usb_device * udev)3433 static int em28xx_media_device_init(struct em28xx *dev,
3434 struct usb_device *udev)
3435 {
3436 #ifdef CONFIG_MEDIA_CONTROLLER
3437 struct media_device *mdev;
3438
3439 mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
3440 if (!mdev)
3441 return -ENOMEM;
3442
3443 if (udev->product)
3444 media_device_usb_init(mdev, udev, udev->product);
3445 else if (udev->manufacturer)
3446 media_device_usb_init(mdev, udev, udev->manufacturer);
3447 else
3448 media_device_usb_init(mdev, udev, dev_name(&dev->intf->dev));
3449
3450 dev->media_dev = mdev;
3451 #endif
3452 return 0;
3453 }
3454
em28xx_unregister_media_device(struct em28xx * dev)3455 static void em28xx_unregister_media_device(struct em28xx *dev)
3456 {
3457 #ifdef CONFIG_MEDIA_CONTROLLER
3458 if (dev->media_dev) {
3459 media_device_unregister(dev->media_dev);
3460 media_device_cleanup(dev->media_dev);
3461 kfree(dev->media_dev);
3462 dev->media_dev = NULL;
3463 }
3464 #endif
3465 }
3466
3467 /*
3468 * em28xx_release_resources()
3469 * unregisters the v4l2,i2c and usb devices
3470 * called when the device gets disconnected or at module unload
3471 */
em28xx_release_resources(struct em28xx * dev)3472 static void em28xx_release_resources(struct em28xx *dev)
3473 {
3474 struct usb_device *udev = interface_to_usbdev(dev->intf);
3475
3476 /*FIXME: I2C IR should be disconnected */
3477
3478 mutex_lock(&dev->lock);
3479
3480 em28xx_unregister_media_device(dev);
3481
3482 if (dev->def_i2c_bus)
3483 em28xx_i2c_unregister(dev, 1);
3484 em28xx_i2c_unregister(dev, 0);
3485
3486 if (dev->ts == PRIMARY_TS)
3487 usb_put_dev(udev);
3488
3489 /* Mark device as unused */
3490 clear_bit(dev->devno, em28xx_devused);
3491
3492 mutex_unlock(&dev->lock);
3493 };
3494
3495 /**
3496 * em28xx_free_device() - Free em28xx device
3497 *
3498 * @ref: struct kref for em28xx device
3499 *
3500 * This is called when all extensions and em28xx core unregisters a device
3501 */
em28xx_free_device(struct kref * ref)3502 void em28xx_free_device(struct kref *ref)
3503 {
3504 struct em28xx *dev = kref_to_dev(ref);
3505
3506 dev_info(&dev->intf->dev, "Freeing device\n");
3507
3508 if (!dev->disconnected)
3509 em28xx_release_resources(dev);
3510
3511 if (dev->ts == PRIMARY_TS)
3512 kfree(dev->alt_max_pkt_size_isoc);
3513
3514 kfree(dev);
3515 }
3516 EXPORT_SYMBOL_GPL(em28xx_free_device);
3517
3518 /*
3519 * em28xx_init_dev()
3520 * allocates and inits the device structs, registers i2c bus and v4l device
3521 */
em28xx_init_dev(struct em28xx * dev,struct usb_device * udev,struct usb_interface * intf,int minor)3522 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
3523 struct usb_interface *intf,
3524 int minor)
3525 {
3526 int retval;
3527 const char *chip_name = NULL;
3528
3529 dev->intf = intf;
3530 mutex_init(&dev->ctrl_urb_lock);
3531 spin_lock_init(&dev->slock);
3532
3533 dev->em28xx_write_regs = em28xx_write_regs;
3534 dev->em28xx_read_reg = em28xx_read_reg;
3535 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
3536 dev->em28xx_write_regs_req = em28xx_write_regs_req;
3537 dev->em28xx_read_reg_req = em28xx_read_reg_req;
3538 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
3539
3540 em28xx_set_model(dev);
3541
3542 dev->wait_after_write = 5;
3543
3544 /* Based on the Chip ID, set the device configuration */
3545 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
3546 if (retval > 0) {
3547 dev->chip_id = retval;
3548
3549 switch (dev->chip_id) {
3550 case CHIP_ID_EM2800:
3551 chip_name = "em2800";
3552 break;
3553 case CHIP_ID_EM2710:
3554 chip_name = "em2710";
3555 break;
3556 case CHIP_ID_EM2750:
3557 chip_name = "em2750";
3558 break;
3559 case CHIP_ID_EM2765:
3560 chip_name = "em2765";
3561 dev->wait_after_write = 0;
3562 dev->is_em25xx = 1;
3563 dev->eeprom_addrwidth_16bit = 1;
3564 break;
3565 case CHIP_ID_EM2820:
3566 chip_name = "em2710/2820";
3567 if (le16_to_cpu(udev->descriptor.idVendor) == 0xeb1a) {
3568 __le16 idProd = udev->descriptor.idProduct;
3569
3570 if (le16_to_cpu(idProd) == 0x2710)
3571 chip_name = "em2710";
3572 else if (le16_to_cpu(idProd) == 0x2820)
3573 chip_name = "em2820";
3574 }
3575 /* NOTE: the em2820 is used in webcams, too ! */
3576 break;
3577 case CHIP_ID_EM2840:
3578 chip_name = "em2840";
3579 break;
3580 case CHIP_ID_EM2860:
3581 chip_name = "em2860";
3582 break;
3583 case CHIP_ID_EM2870:
3584 chip_name = "em2870";
3585 dev->wait_after_write = 0;
3586 break;
3587 case CHIP_ID_EM2874:
3588 chip_name = "em2874";
3589 dev->wait_after_write = 0;
3590 dev->eeprom_addrwidth_16bit = 1;
3591 break;
3592 case CHIP_ID_EM28174:
3593 chip_name = "em28174";
3594 dev->wait_after_write = 0;
3595 dev->eeprom_addrwidth_16bit = 1;
3596 break;
3597 case CHIP_ID_EM28178:
3598 chip_name = "em28178";
3599 dev->wait_after_write = 0;
3600 dev->eeprom_addrwidth_16bit = 1;
3601 break;
3602 case CHIP_ID_EM2883:
3603 chip_name = "em2882/3";
3604 dev->wait_after_write = 0;
3605 break;
3606 case CHIP_ID_EM2884:
3607 chip_name = "em2884";
3608 dev->wait_after_write = 0;
3609 dev->eeprom_addrwidth_16bit = 1;
3610 break;
3611 }
3612 }
3613 if (!chip_name)
3614 dev_info(&dev->intf->dev,
3615 "unknown em28xx chip ID (%d)\n", dev->chip_id);
3616 else
3617 dev_info(&dev->intf->dev, "chip ID is %s\n", chip_name);
3618
3619 em28xx_media_device_init(dev, udev);
3620
3621 if (dev->is_audio_only) {
3622 retval = em28xx_audio_setup(dev);
3623 if (retval) {
3624 retval = -ENODEV;
3625 goto err_deinit_media;
3626 }
3627 em28xx_init_extension(dev);
3628
3629 return 0;
3630 }
3631
3632 em28xx_pre_card_setup(dev);
3633
3634 rt_mutex_init(&dev->i2c_bus_lock);
3635
3636 /* register i2c bus 0 */
3637 if (dev->board.is_em2800)
3638 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800);
3639 else
3640 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX);
3641 if (retval < 0) {
3642 dev_err(&dev->intf->dev,
3643 "%s: em28xx_i2c_register bus 0 - error [%d]!\n",
3644 __func__, retval);
3645 goto err_deinit_media;
3646 }
3647
3648 /* register i2c bus 1 */
3649 if (dev->def_i2c_bus) {
3650 if (dev->is_em25xx)
3651 retval = em28xx_i2c_register(dev, 1,
3652 EM28XX_I2C_ALGO_EM25XX_BUS_B);
3653 else
3654 retval = em28xx_i2c_register(dev, 1,
3655 EM28XX_I2C_ALGO_EM28XX);
3656 if (retval < 0) {
3657 dev_err(&dev->intf->dev,
3658 "%s: em28xx_i2c_register bus 1 - error [%d]!\n",
3659 __func__, retval);
3660
3661 goto err_unreg_i2c;
3662 }
3663 }
3664
3665 /* Do board specific init and eeprom reading */
3666 em28xx_card_setup(dev);
3667
3668 return 0;
3669
3670 err_unreg_i2c:
3671 em28xx_i2c_unregister(dev, 0);
3672 err_deinit_media:
3673 em28xx_unregister_media_device(dev);
3674 return retval;
3675 }
3676
em28xx_duplicate_dev(struct em28xx * dev)3677 static int em28xx_duplicate_dev(struct em28xx *dev)
3678 {
3679 int nr;
3680 struct em28xx *sec_dev = kmemdup(dev, sizeof(*sec_dev), GFP_KERNEL);
3681
3682 if (!sec_dev) {
3683 dev->dev_next = NULL;
3684 return -ENOMEM;
3685 }
3686 /* Check to see next free device and mark as used */
3687 do {
3688 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS);
3689 if (nr >= EM28XX_MAXBOARDS) {
3690 /* No free device slots */
3691 dev_warn(&dev->intf->dev, ": Supports only %i em28xx boards.\n",
3692 EM28XX_MAXBOARDS);
3693 kfree(sec_dev);
3694 dev->dev_next = NULL;
3695 return -ENOMEM;
3696 }
3697 } while (test_and_set_bit(nr, em28xx_devused));
3698 sec_dev->devno = nr;
3699 snprintf(sec_dev->name, 28, "em28xx #%d", nr);
3700 sec_dev->dev_next = NULL;
3701 dev->dev_next = sec_dev;
3702 return 0;
3703 }
3704
3705 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
3706 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
3707
em28xx_check_usb_descriptor(struct em28xx * dev,struct usb_device * udev,struct usb_interface * intf,int alt,int ep,bool * has_vendor_audio,bool * has_video,bool * has_dvb)3708 static void em28xx_check_usb_descriptor(struct em28xx *dev,
3709 struct usb_device *udev,
3710 struct usb_interface *intf,
3711 int alt, int ep,
3712 bool *has_vendor_audio,
3713 bool *has_video,
3714 bool *has_dvb)
3715 {
3716 const struct usb_endpoint_descriptor *e;
3717 int sizedescr, size;
3718
3719 /*
3720 * NOTE:
3721 *
3722 * Old logic with support for isoc transfers only was:
3723 * 0x82 isoc => analog
3724 * 0x83 isoc => audio
3725 * 0x84 isoc => digital
3726 *
3727 * New logic with support for bulk transfers
3728 * 0x82 isoc => analog
3729 * 0x82 bulk => analog
3730 * 0x83 isoc* => audio
3731 * 0x84 isoc => digital
3732 * 0x84 bulk => analog or digital**
3733 * 0x85 isoc => digital TS2
3734 * 0x85 bulk => digital TS2
3735 * (*: audio should always be isoc)
3736 * (**: analog, if ep 0x82 is isoc, otherwise digital)
3737 *
3738 * The new logic preserves backwards compatibility and
3739 * reflects the endpoint configurations we have seen
3740 * so far. But there might be devices for which this
3741 * logic is not sufficient...
3742 */
3743
3744 e = &intf->altsetting[alt].endpoint[ep].desc;
3745
3746 if (!usb_endpoint_dir_in(e))
3747 return;
3748
3749 sizedescr = le16_to_cpu(e->wMaxPacketSize);
3750 size = sizedescr & 0x7ff;
3751
3752 if (udev->speed == USB_SPEED_HIGH)
3753 size = size * hb_mult(sizedescr);
3754
3755 /* Only inspect input endpoints */
3756
3757 switch (e->bEndpointAddress) {
3758 case 0x82:
3759 *has_video = true;
3760 if (usb_endpoint_xfer_isoc(e)) {
3761 dev->analog_ep_isoc = e->bEndpointAddress;
3762 dev->alt_max_pkt_size_isoc[alt] = size;
3763 } else if (usb_endpoint_xfer_bulk(e)) {
3764 dev->analog_ep_bulk = e->bEndpointAddress;
3765 }
3766 return;
3767 case 0x83:
3768 if (usb_endpoint_xfer_isoc(e))
3769 *has_vendor_audio = true;
3770 else
3771 dev_err(&intf->dev,
3772 "error: skipping audio endpoint 0x83, because it uses bulk transfers !\n");
3773 return;
3774 case 0x84:
3775 if (*has_video && (usb_endpoint_xfer_bulk(e))) {
3776 dev->analog_ep_bulk = e->bEndpointAddress;
3777 } else {
3778 if (usb_endpoint_xfer_isoc(e)) {
3779 if (size > dev->dvb_max_pkt_size_isoc) {
3780 /*
3781 * 2) some manufacturers (e.g. Terratec)
3782 * disable endpoints by setting
3783 * wMaxPacketSize to 0 bytes for all
3784 * alt settings. So far, we've seen
3785 * this for DVB isoc endpoints only.
3786 */
3787 *has_dvb = true;
3788 dev->dvb_ep_isoc = e->bEndpointAddress;
3789 dev->dvb_max_pkt_size_isoc = size;
3790 dev->dvb_alt_isoc = alt;
3791 }
3792 } else {
3793 *has_dvb = true;
3794 dev->dvb_ep_bulk = e->bEndpointAddress;
3795 }
3796 }
3797 return;
3798 case 0x85:
3799 if (usb_endpoint_xfer_isoc(e)) {
3800 if (size > dev->dvb_max_pkt_size_isoc_ts2) {
3801 dev->dvb_ep_isoc_ts2 = e->bEndpointAddress;
3802 dev->dvb_max_pkt_size_isoc_ts2 = size;
3803 dev->dvb_alt_isoc = alt;
3804 }
3805 } else {
3806 dev->dvb_ep_bulk_ts2 = e->bEndpointAddress;
3807 }
3808 return;
3809 }
3810 }
3811
3812 /*
3813 * em28xx_usb_probe()
3814 * checks for supported devices
3815 */
em28xx_usb_probe(struct usb_interface * intf,const struct usb_device_id * id)3816 static int em28xx_usb_probe(struct usb_interface *intf,
3817 const struct usb_device_id *id)
3818 {
3819 struct usb_device *udev;
3820 struct em28xx *dev = NULL;
3821 int retval;
3822 bool has_vendor_audio = false, has_video = false, has_dvb = false;
3823 int i, nr, try_bulk;
3824 const int ifnum = intf->altsetting[0].desc.bInterfaceNumber;
3825 char *speed;
3826
3827 udev = usb_get_dev(interface_to_usbdev(intf));
3828
3829 /* Check to see next free device and mark as used */
3830 do {
3831 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS);
3832 if (nr >= EM28XX_MAXBOARDS) {
3833 /* No free device slots */
3834 dev_err(&intf->dev,
3835 "Driver supports up to %i em28xx boards.\n",
3836 EM28XX_MAXBOARDS);
3837 retval = -ENOMEM;
3838 goto err_no_slot;
3839 }
3840 } while (test_and_set_bit(nr, em28xx_devused));
3841
3842 /* Don't register audio interfaces */
3843 if (intf->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3844 dev_info(&intf->dev,
3845 "audio device (%04x:%04x): interface %i, class %i\n",
3846 le16_to_cpu(udev->descriptor.idVendor),
3847 le16_to_cpu(udev->descriptor.idProduct),
3848 ifnum,
3849 intf->altsetting[0].desc.bInterfaceClass);
3850
3851 retval = -ENODEV;
3852 goto err;
3853 }
3854
3855 /* allocate memory for our device state and initialize it */
3856 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3857 if (!dev) {
3858 retval = -ENOMEM;
3859 goto err;
3860 }
3861
3862 /* compute alternate max packet sizes */
3863 dev->alt_max_pkt_size_isoc = kcalloc(intf->num_altsetting,
3864 sizeof(dev->alt_max_pkt_size_isoc[0]),
3865 GFP_KERNEL);
3866 if (!dev->alt_max_pkt_size_isoc) {
3867 kfree(dev);
3868 retval = -ENOMEM;
3869 goto err;
3870 }
3871
3872 /* Get endpoints */
3873 for (i = 0; i < intf->num_altsetting; i++) {
3874 int ep;
3875
3876 for (ep = 0;
3877 ep < intf->altsetting[i].desc.bNumEndpoints;
3878 ep++)
3879 em28xx_check_usb_descriptor(dev, udev, intf,
3880 i, ep,
3881 &has_vendor_audio,
3882 &has_video,
3883 &has_dvb);
3884 }
3885
3886 if (!(has_vendor_audio || has_video || has_dvb)) {
3887 retval = -ENODEV;
3888 goto err_free;
3889 }
3890
3891 switch (udev->speed) {
3892 case USB_SPEED_LOW:
3893 speed = "1.5";
3894 break;
3895 case USB_SPEED_UNKNOWN:
3896 case USB_SPEED_FULL:
3897 speed = "12";
3898 break;
3899 case USB_SPEED_HIGH:
3900 speed = "480";
3901 break;
3902 default:
3903 speed = "unknown";
3904 }
3905
3906 dev_info(&intf->dev,
3907 "New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n",
3908 udev->manufacturer ? udev->manufacturer : "",
3909 udev->product ? udev->product : "",
3910 speed,
3911 le16_to_cpu(udev->descriptor.idVendor),
3912 le16_to_cpu(udev->descriptor.idProduct),
3913 ifnum,
3914 intf->altsetting->desc.bInterfaceNumber);
3915
3916 /*
3917 * Make sure we have 480 Mbps of bandwidth, otherwise things like
3918 * video stream wouldn't likely work, since 12 Mbps is generally
3919 * not enough even for most Digital TV streams.
3920 */
3921 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3922 dev_err(&intf->dev, "Device initialization failed.\n");
3923 dev_err(&intf->dev,
3924 "Device must be connected to a high-speed USB 2.0 port.\n");
3925 retval = -ENODEV;
3926 goto err_free;
3927 }
3928
3929 kref_init(&dev->ref);
3930
3931 dev->devno = nr;
3932 dev->model = id->driver_info;
3933 dev->alt = -1;
3934 dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb);
3935 dev->has_video = has_video;
3936 dev->ifnum = ifnum;
3937
3938 dev->ts = PRIMARY_TS;
3939 snprintf(dev->name, 28, "em28xx");
3940 dev->dev_next = NULL;
3941
3942 if (has_vendor_audio) {
3943 dev_info(&intf->dev,
3944 "Audio interface %i found (Vendor Class)\n", ifnum);
3945 dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR;
3946 }
3947 /* Checks if audio is provided by a USB Audio Class intf */
3948 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3949 struct usb_interface *uif = udev->config->interface[i];
3950
3951 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3952 if (has_vendor_audio)
3953 dev_err(&intf->dev,
3954 "em28xx: device seems to have vendor AND usb audio class interfaces !\n"
3955 "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n");
3956 dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS;
3957 break;
3958 }
3959 }
3960
3961 if (has_video)
3962 dev_info(&intf->dev, "Video interface %i found:%s%s\n",
3963 ifnum,
3964 dev->analog_ep_bulk ? " bulk" : "",
3965 dev->analog_ep_isoc ? " isoc" : "");
3966 if (has_dvb)
3967 dev_info(&intf->dev, "DVB interface %i found:%s%s\n",
3968 ifnum,
3969 dev->dvb_ep_bulk ? " bulk" : "",
3970 dev->dvb_ep_isoc ? " isoc" : "");
3971
3972 dev->num_alt = intf->num_altsetting;
3973
3974 if ((unsigned int)card[nr] < em28xx_bcount)
3975 dev->model = card[nr];
3976
3977 /* save our data pointer in this intf device */
3978 usb_set_intfdata(intf, dev);
3979
3980 /* allocate device struct and check if the device is a webcam */
3981 mutex_init(&dev->lock);
3982 retval = em28xx_init_dev(dev, udev, intf, nr);
3983 if (retval)
3984 goto err_free;
3985
3986 if (usb_xfer_mode < 0) {
3987 if (dev->is_webcam)
3988 try_bulk = 1;
3989 else
3990 try_bulk = 0;
3991 } else {
3992 try_bulk = usb_xfer_mode > 0;
3993 }
3994
3995 /* Disable V4L2 if the device doesn't have a decoder or image sensor */
3996 if (has_video &&
3997 dev->board.decoder == EM28XX_NODECODER &&
3998 dev->em28xx_sensor == EM28XX_NOSENSOR) {
3999 dev_err(&intf->dev,
4000 "Currently, V4L2 is not supported on this model\n");
4001 has_video = false;
4002 dev->has_video = false;
4003 }
4004
4005 if (dev->board.has_dual_ts &&
4006 (dev->tuner_type != TUNER_ABSENT || INPUT(0)->type)) {
4007 /*
4008 * The logic with sets alternate is not ready for dual-tuners
4009 * which analog modes.
4010 */
4011 dev_err(&intf->dev,
4012 "We currently don't support analog TV or stream capture on dual tuners.\n");
4013 has_video = false;
4014 }
4015
4016 /* Select USB transfer types to use */
4017 if (has_video) {
4018 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk))
4019 dev->analog_xfer_bulk = 1;
4020 dev_info(&intf->dev, "analog set to %s mode.\n",
4021 dev->analog_xfer_bulk ? "bulk" : "isoc");
4022 }
4023 if (has_dvb) {
4024 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk))
4025 dev->dvb_xfer_bulk = 1;
4026 dev_info(&intf->dev, "dvb set to %s mode.\n",
4027 dev->dvb_xfer_bulk ? "bulk" : "isoc");
4028 }
4029
4030 if (dev->board.has_dual_ts && em28xx_duplicate_dev(dev) == 0) {
4031 kref_init(&dev->dev_next->ref);
4032
4033 dev->dev_next->ts = SECONDARY_TS;
4034 dev->dev_next->alt = -1;
4035 dev->dev_next->is_audio_only = has_vendor_audio &&
4036 !(has_video || has_dvb);
4037 dev->dev_next->has_video = false;
4038 dev->dev_next->ifnum = ifnum;
4039 dev->dev_next->model = id->driver_info;
4040
4041 mutex_init(&dev->dev_next->lock);
4042 retval = em28xx_init_dev(dev->dev_next, udev, intf,
4043 dev->dev_next->devno);
4044 if (retval)
4045 goto err_free;
4046
4047 dev->dev_next->board.ir_codes = NULL; /* No IR for 2nd tuner */
4048 dev->dev_next->board.has_ir_i2c = 0; /* No IR for 2nd tuner */
4049
4050 if (usb_xfer_mode < 0) {
4051 if (dev->dev_next->is_webcam)
4052 try_bulk = 1;
4053 else
4054 try_bulk = 0;
4055 } else {
4056 try_bulk = usb_xfer_mode > 0;
4057 }
4058
4059 /* Select USB transfer types to use */
4060 if (has_dvb) {
4061 if (!dev->dvb_ep_isoc_ts2 ||
4062 (try_bulk && dev->dvb_ep_bulk_ts2))
4063 dev->dev_next->dvb_xfer_bulk = 1;
4064 dev_info(&dev->intf->dev, "dvb ts2 set to %s mode.\n",
4065 dev->dev_next->dvb_xfer_bulk ? "bulk" : "isoc");
4066 }
4067
4068 dev->dev_next->dvb_ep_isoc = dev->dvb_ep_isoc_ts2;
4069 dev->dev_next->dvb_ep_bulk = dev->dvb_ep_bulk_ts2;
4070 dev->dev_next->dvb_max_pkt_size_isoc = dev->dvb_max_pkt_size_isoc_ts2;
4071 dev->dev_next->dvb_alt_isoc = dev->dvb_alt_isoc;
4072
4073 /* Configure hardware to support TS2*/
4074 if (dev->dvb_xfer_bulk) {
4075 /* The ep4 and ep5 are configured for BULK */
4076 em28xx_write_reg(dev, 0x0b, 0x96);
4077 mdelay(100);
4078 em28xx_write_reg(dev, 0x0b, 0x80);
4079 mdelay(100);
4080 } else {
4081 /* The ep4 and ep5 are configured for ISO */
4082 em28xx_write_reg(dev, 0x0b, 0x96);
4083 mdelay(100);
4084 em28xx_write_reg(dev, 0x0b, 0x82);
4085 mdelay(100);
4086 }
4087 }
4088
4089 request_modules(dev);
4090
4091 /*
4092 * Do it at the end, to reduce dynamic configuration changes during
4093 * the device init. Yet, as request_modules() can be async, the
4094 * topology will likely change after the load of the em28xx subdrivers.
4095 */
4096 #ifdef CONFIG_MEDIA_CONTROLLER
4097 retval = media_device_register(dev->media_dev);
4098 #endif
4099
4100 return 0;
4101
4102 err_free:
4103 kfree(dev->alt_max_pkt_size_isoc);
4104 kfree(dev);
4105
4106 err:
4107 clear_bit(nr, em28xx_devused);
4108
4109 err_no_slot:
4110 usb_put_dev(udev);
4111 return retval;
4112 }
4113
4114 /*
4115 * em28xx_usb_disconnect()
4116 * called when the device gets disconnected
4117 * video device will be unregistered on v4l2_close in case it is still open
4118 */
em28xx_usb_disconnect(struct usb_interface * intf)4119 static void em28xx_usb_disconnect(struct usb_interface *intf)
4120 {
4121 struct em28xx *dev;
4122
4123 dev = usb_get_intfdata(intf);
4124 usb_set_intfdata(intf, NULL);
4125
4126 if (!dev)
4127 return;
4128
4129 if (dev->dev_next) {
4130 dev->dev_next->disconnected = 1;
4131 dev_info(&dev->intf->dev, "Disconnecting %s\n",
4132 dev->dev_next->name);
4133 }
4134
4135 dev->disconnected = 1;
4136
4137 dev_info(&dev->intf->dev, "Disconnecting %s\n", dev->name);
4138
4139 flush_request_modules(dev);
4140
4141 em28xx_close_extension(dev);
4142
4143 if (dev->dev_next)
4144 em28xx_release_resources(dev->dev_next);
4145 em28xx_release_resources(dev);
4146
4147 if (dev->dev_next) {
4148 kref_put(&dev->dev_next->ref, em28xx_free_device);
4149 dev->dev_next = NULL;
4150 }
4151 kref_put(&dev->ref, em28xx_free_device);
4152 }
4153
em28xx_usb_suspend(struct usb_interface * intf,pm_message_t message)4154 static int em28xx_usb_suspend(struct usb_interface *intf,
4155 pm_message_t message)
4156 {
4157 struct em28xx *dev;
4158
4159 dev = usb_get_intfdata(intf);
4160 if (!dev)
4161 return 0;
4162 em28xx_suspend_extension(dev);
4163 return 0;
4164 }
4165
em28xx_usb_resume(struct usb_interface * intf)4166 static int em28xx_usb_resume(struct usb_interface *intf)
4167 {
4168 struct em28xx *dev;
4169
4170 dev = usb_get_intfdata(intf);
4171 if (!dev)
4172 return 0;
4173 em28xx_resume_extension(dev);
4174 return 0;
4175 }
4176
4177 static struct usb_driver em28xx_usb_driver = {
4178 .name = "em28xx",
4179 .probe = em28xx_usb_probe,
4180 .disconnect = em28xx_usb_disconnect,
4181 .suspend = em28xx_usb_suspend,
4182 .resume = em28xx_usb_resume,
4183 .reset_resume = em28xx_usb_resume,
4184 .id_table = em28xx_id_table,
4185 };
4186
4187 module_usb_driver(em28xx_usb_driver);
4188