1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
4 // video capture devices
5 //
6 // Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
7 // Markus Rechberger <mrechberger@gmail.com>
8 // Mauro Carvalho Chehab <mchehab@kernel.org>
9 // Sascha Sommer <saschasommer@freenet.de>
10 // Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com>
11 //
12 // This program is free software; you can redistribute it and/or modify
13 // it under the terms of the GNU General Public License as published by
14 // the Free Software Foundation; either version 2 of the License, or
15 // (at your option) any later version.
16 //
17 // This program is distributed in the hope that it will be useful,
18 // but WITHOUT ANY WARRANTY; without even the implied warranty of
19 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 // GNU General Public License for more details.
21
22 #include "em28xx.h"
23
24 #include <linux/init.h>
25 #include <linux/module.h>
26 #include <linux/slab.h>
27 #include <linux/delay.h>
28 #include <linux/i2c.h>
29 #include <linux/usb.h>
30 #include <media/tuner.h>
31 #include <media/drv-intf/msp3400.h>
32 #include <media/i2c/saa7115.h>
33 #include <dt-bindings/media/tvp5150.h>
34 #include <media/i2c/tvaudio.h>
35 #include <media/tveeprom.h>
36 #include <media/v4l2-common.h>
37 #include <sound/ac97_codec.h>
38
39 #define DRIVER_NAME "em28xx"
40
41 static int tuner = -1;
42 module_param(tuner, int, 0444);
43 MODULE_PARM_DESC(tuner, "tuner type");
44
45 static unsigned int disable_ir;
46 module_param(disable_ir, int, 0444);
47 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
48
49 static unsigned int disable_usb_speed_check;
50 module_param(disable_usb_speed_check, int, 0444);
51 MODULE_PARM_DESC(disable_usb_speed_check,
52 "override min bandwidth requirement of 480M bps");
53
54 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
55 module_param_array(card, int, NULL, 0444);
56 MODULE_PARM_DESC(card, "card type");
57
58 static int usb_xfer_mode = -1;
59 module_param(usb_xfer_mode, int, 0444);
60 MODULE_PARM_DESC(usb_xfer_mode,
61 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)");
62
63 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
64 static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS);
65
66 struct em28xx_hash_table {
67 unsigned long hash;
68 unsigned int model;
69 unsigned int tuner;
70 };
71
72 static void em28xx_pre_card_setup(struct em28xx *dev);
73
74 /*
75 * Reset sequences for analog/digital modes
76 */
77
78 /* Reset for the most [analog] boards */
79 static const struct em28xx_reg_seq default_analog[] = {
80 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
81 { -1, -1, -1, -1},
82 };
83
84 /* Reset for the most [digital] boards */
85 static const struct em28xx_reg_seq default_digital[] = {
86 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
87 { -1, -1, -1, -1},
88 };
89
90 /* Board :Zolid Hybrid Tv Stick */
91 static struct em28xx_reg_seq zolid_tuner[] = {
92 {EM2820_R08_GPIO_CTRL, 0xfd, 0xff, 100},
93 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 100},
94 { -1, -1, -1, -1},
95 };
96
97 static struct em28xx_reg_seq zolid_digital[] = {
98 {EM2820_R08_GPIO_CTRL, 0x6a, 0xff, 100},
99 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 100},
100 {EM2880_R04_GPO, 0x04, 0xff, 100},
101 {EM2880_R04_GPO, 0x0c, 0xff, 100},
102 { -1, -1, -1, -1},
103 };
104
105 /* Board Hauppauge WinTV HVR 900 analog */
106 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
107 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10},
108 { 0x05, 0xff, 0x10, 10},
109 { -1, -1, -1, -1},
110 };
111
112 /* Board Hauppauge WinTV HVR 900 digital */
113 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
114 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
115 {EM2880_R04_GPO, 0x04, 0x0f, 10},
116 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
117 { -1, -1, -1, -1},
118 };
119
120 /* Board Hauppauge WinTV HVR 900 (R2) digital */
121 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
122 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
123 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
124 { -1, -1, -1, -1},
125 };
126
127 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
128 static const struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
129 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10},
130 { -1, -1, -1, -1},
131 };
132
133 /* Board - EM2882 Kworld 315U digital */
134 static const struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
135 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
136 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
137 {EM2880_R04_GPO, 0x04, 0xff, 10},
138 {EM2880_R04_GPO, 0x0c, 0xff, 10},
139 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10},
140 { -1, -1, -1, -1},
141 };
142
143 static const struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
144 {EM2880_R04_GPO, 0x08, 0xff, 10},
145 {EM2880_R04_GPO, 0x0c, 0xff, 10},
146 {EM2880_R04_GPO, 0x08, 0xff, 10},
147 {EM2880_R04_GPO, 0x0c, 0xff, 10},
148 { -1, -1, -1, -1},
149 };
150
151 static const struct em28xx_reg_seq kworld_330u_analog[] = {
152 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
153 {EM2880_R04_GPO, 0x00, 0xff, 10},
154 { -1, -1, -1, -1},
155 };
156
157 static const struct em28xx_reg_seq kworld_330u_digital[] = {
158 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
159 {EM2880_R04_GPO, 0x08, 0xff, 10},
160 { -1, -1, -1, -1},
161 };
162
163 /*
164 * Evga inDtube
165 * GPIO0 - Enable digital power (s5h1409) - low to enable
166 * GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
167 * GPIO4 - xc3028 reset
168 * GOP3 - s5h1409 reset
169 */
170 static const struct em28xx_reg_seq evga_indtube_analog[] = {
171 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60},
172 { -1, -1, -1, -1},
173 };
174
175 static const struct em28xx_reg_seq evga_indtube_digital[] = {
176 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1},
177 {EM2880_R04_GPO, 0x04, 0xff, 10},
178 {EM2880_R04_GPO, 0x0c, 0xff, 1},
179 { -1, -1, -1, -1},
180 };
181
182 /*
183 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map:
184 * EM_GPIO_0 - currently unknown
185 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
186 * EM_GPIO_2 - currently unknown
187 * EM_GPIO_3 - currently unknown
188 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
189 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
190 * EM_GPIO_6 - currently unknown
191 * EM_GPIO_7 - currently unknown
192 */
193 static const struct em28xx_reg_seq kworld_a340_digital[] = {
194 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
195 { -1, -1, -1, -1},
196 };
197
198 static const struct em28xx_reg_seq kworld_ub435q_v3_digital[] = {
199 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
200 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
201 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100},
202 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
203 { -1, -1, -1, -1},
204 };
205
206 /* Pinnacle Hybrid Pro eb1a:2881 */
207 static const struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
208 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10},
209 { -1, -1, -1, -1},
210 };
211
212 static const struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
213 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
214 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
215 {EM2880_R04_GPO, 0x0c, 0xff, 1},
216 { -1, -1, -1, -1},
217 };
218
219 static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
220 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
221 {EM2880_R04_GPO, 0x00, 0xff, 10},
222 { -1, -1, -1, -1},
223 };
224
225 static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
226 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
227 {EM2880_R04_GPO, 0x08, 0xff, 10},
228 { -1, -1, -1, -1},
229 };
230
231 /*
232 * PCTV HD Mini (80e) GPIOs
233 * 0-5: not used
234 * 6: demod reset, active low
235 * 7: LED on, active high
236 */
237 static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = {
238 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
239 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/
240 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10},
241 { -1, -1, -1, -1},
242 };
243
244 /*
245 * eb1a:2868 Reddo DVB-C USB TV Box
246 * GPIO4 - CU1216L NIM
247 * Other GPIOs seems to be don't care.
248 */
249 static const struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
250 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
251 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10},
252 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
253 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
254 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10},
255 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10},
256 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
257 { -1, -1, -1, -1},
258 };
259
260 /* Callback for the most boards */
261 static const struct em28xx_reg_seq default_tuner_gpio[] = {
262 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
263 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10},
264 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
265 { -1, -1, -1, -1},
266 };
267
268 /* Mute/unmute */
269 static const struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
270 {EM2820_R08_GPIO_CTRL, 5, 7, 10},
271 { -1, -1, -1, -1},
272 };
273
274 static const struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
275 {EM2820_R08_GPIO_CTRL, 4, 7, 10},
276 { -1, -1, -1, -1},
277 };
278
279 static const struct em28xx_reg_seq compro_mute_gpio[] = {
280 {EM2820_R08_GPIO_CTRL, 6, 7, 10},
281 { -1, -1, -1, -1},
282 };
283
284 /* Terratec AV350 */
285 static const struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
286 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10},
287 { -1, -1, -1, -1},
288 };
289
290 static const struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
291 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
292 { -1, -1, -1, -1},
293 };
294
295 static const struct em28xx_reg_seq silvercrest_reg_seq[] = {
296 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
297 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10},
298 { -1, -1, -1, -1},
299 };
300
301 static const struct em28xx_reg_seq vc211a_enable[] = {
302 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10},
303 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10},
304 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10},
305 { -1, -1, -1, -1},
306 };
307
308 static const struct em28xx_reg_seq dikom_dk300_digital[] = {
309 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
310 {EM2880_R04_GPO, 0x08, 0xff, 10},
311 { -1, -1, -1, -1},
312 };
313
314 /* Reset for the most [digital] boards */
315 static const struct em28xx_reg_seq leadership_digital[] = {
316 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10},
317 { -1, -1, -1, -1},
318 };
319
320 static const struct em28xx_reg_seq leadership_reset[] = {
321 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
322 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10},
323 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
324 { -1, -1, -1, -1},
325 };
326
327 /*
328 * 2013:024f PCTV nanoStick T2 290e
329 * GPIO_6 - demod reset
330 * GPIO_7 - LED
331 */
332 static const struct em28xx_reg_seq pctv_290e[] = {
333 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80},
334 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
335 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
336 { -1, -1, -1, -1},
337 };
338
339 #if 0
340 static const struct em28xx_reg_seq terratec_h5_gpio[] = {
341 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
342 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
343 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50},
344 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50},
345 { -1, -1, -1, -1},
346 };
347
348 static const struct em28xx_reg_seq terratec_h5_digital[] = {
349 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
350 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
351 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
352 { -1, -1, -1, -1},
353 };
354 #endif
355
356 /*
357 * 2013:024f PCTV DVB-S2 Stick 460e
358 * GPIO_0 - POWER_ON
359 * GPIO_1 - BOOST
360 * GPIO_2 - VUV_LNB (red LED)
361 * GPIO_3 - EXT_12V
362 * GPIO_4 - INT_DEM (DEMOD GPIO_0)
363 * GPIO_5 - INT_LNB
364 * GPIO_6 - RESET_DEM
365 * GPIO_7 - LED (green LED)
366 */
367 static const struct em28xx_reg_seq pctv_460e[] = {
368 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50},
369 { 0x0d, 0xff, 0xff, 50},
370 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */
371 { 0x0d, 0x42, 0xff, 50},
372 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */
373 { -1, -1, -1, -1},
374 };
375
376 static const struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
377 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
378 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */
379 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35},
380 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
381 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
382 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10},
383 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10},
384 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20},
385 { -1, -1, -1, -1},
386 };
387
388 /*
389 * 2013:0258 PCTV DVB-S2 Stick (461e)
390 * GPIO 0 = POWER_ON
391 * GPIO 1 = BOOST
392 * GPIO 2 = VUV_LNB (red LED)
393 * GPIO 3 = #EXT_12V
394 * GPIO 4 = INT_DEM
395 * GPIO 5 = INT_LNB
396 * GPIO 6 = #RESET_DEM
397 * GPIO 7 = P07_LED (green LED)
398 */
399 static const struct em28xx_reg_seq pctv_461e[] = {
400 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0},
401 {0x0d, 0xff, 0xff, 0},
402 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */
403 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */
404 {0x0d, 0x42, 0xff, 0},
405 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0},
406 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */
407 { -1, -1, -1, -1},
408 };
409
410 #if 0
411 static const struct em28xx_reg_seq hauppauge_930c_gpio[] = {
412 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
413 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */
414 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
415 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10},
416 { -1, -1, -1, -1},
417 };
418
419 static const struct em28xx_reg_seq hauppauge_930c_digital[] = {
420 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
421 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
422 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
423 { -1, -1, -1, -1},
424 };
425 #endif
426
427 /*
428 * 1b80:e425 MaxMedia UB425-TC
429 * 1b80:e1cc Delock 61959
430 * GPIO_6 - demod reset, 0=active
431 * GPIO_7 - LED, 0=active
432 */
433 static const struct em28xx_reg_seq maxmedia_ub425_tc[] = {
434 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100},
435 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
436 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
437 { -1, -1, -1, -1},
438 };
439
440 /*
441 * 2304:0242 PCTV QuatroStick (510e)
442 * GPIO_2: decoder reset, 0=active
443 * GPIO_4: decoder suspend, 0=active
444 * GPIO_6: demod reset, 0=active
445 * GPIO_7: LED, 1=active
446 */
447 static const struct em28xx_reg_seq pctv_510e[] = {
448 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
449 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
450 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
451 { -1, -1, -1, -1},
452 };
453
454 /*
455 * 2013:0251 PCTV QuatroStick nano (520e)
456 * GPIO_2: decoder reset, 0=active
457 * GPIO_4: decoder suspend, 0=active
458 * GPIO_6: demod reset, 0=active
459 * GPIO_7: LED, 1=active
460 */
461 static const struct em28xx_reg_seq pctv_520e[] = {
462 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
463 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
464 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
465 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
466 { -1, -1, -1, -1},
467 };
468
469 /*
470 * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
471 * reg 0x80/0x84:
472 * GPIO_0: capturing LED, 0=on, 1=off
473 * GPIO_2: AV mute button, 0=pressed, 1=unpressed
474 * GPIO 3: illumination button, 0=pressed, 1=unpressed
475 * GPIO_6: illumination/flash LED, 0=on, 1=off
476 * reg 0x81/0x85:
477 * GPIO_7: snapshot button, 0=pressed, 1=unpressed
478 */
479 static const struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = {
480 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10},
481 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10},
482 { -1, -1, -1, -1},
483 };
484
485 static const struct em28xx_reg_seq pctv_292e[] = {
486 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
487 {0x0d, 0xff, 0xff, 950},
488 {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100},
489 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410},
490 {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300},
491 {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60},
492 {0x0d, 0x42, 0xff, 50},
493 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
494 {-1, -1, -1, -1},
495 };
496
497 static const struct em28xx_reg_seq terratec_t2_stick_hd[] = {
498 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
499 {0x0d, 0xff, 0xff, 600},
500 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
501 {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100},
502 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100},
503 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300},
504 {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100},
505 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300},
506 {0x0d, 0x42, 0xff, 1000},
507 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
508 {-1, -1, -1, -1},
509 };
510
511 static const struct em28xx_reg_seq plex_px_bcud[] = {
512 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
513 {0x0d, 0xff, 0xff, 0},
514 {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0},
515 {EM28XX_R06_I2C_CLK, 0x40, 0xff, 0},
516 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100},
517 {EM28XX_R12_VINENABLE, 0x20, 0x20, 0},
518 {0x0d, 0x42, 0xff, 1000},
519 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
520 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
521 {0x73, 0xfd, 0xff, 100},
522 {-1, -1, -1, -1},
523 };
524
525 /*
526 * 2040:0265 Hauppauge WinTV-dualHD DVB Isoc
527 * 2040:8265 Hauppauge WinTV-dualHD DVB Bulk
528 * 2040:026d Hauppauge WinTV-dualHD ATSC/QAM Isoc
529 * 2040:826d Hauppauge WinTV-dualHD ATSC/QAM Bulk
530 * reg 0x80/0x84:
531 * GPIO_0: Yellow LED tuner 1, 0=on, 1=off
532 * GPIO_1: Green LED tuner 1, 0=on, 1=off
533 * GPIO_2: Yellow LED tuner 2, 0=on, 1=off
534 * GPIO_3: Green LED tuner 2, 0=on, 1=off
535 * GPIO_5: Reset #2, 0=active
536 * GPIO_6: Reset #1, 0=active
537 */
538 static const struct em28xx_reg_seq hauppauge_dualhd_dvb[] = {
539 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
540 {0x0d, 0xff, 0xff, 200},
541 {0x50, 0x04, 0xff, 300},
542 {EM2874_R80_GPIO_P0_CTRL, 0xbf, 0xff, 100}, /* demod 1 reset */
543 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
544 {EM2874_R80_GPIO_P0_CTRL, 0xdf, 0xff, 100}, /* demod 2 reset */
545 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
546 {EM2874_R5F_TS_ENABLE, 0x00, 0xff, 50}, /* disable TS filters */
547 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50},
548 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50},
549 {-1, -1, -1, -1},
550 };
551
552 /* Hauppauge USB QuadHD */
553 static struct em28xx_reg_seq hauppauge_usb_quadhd_atsc_reg_seq[] = {
554 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
555 {0x0d, 0xff, 0xff, 200},
556 {0x50, 0x04, 0xff, 300},
557 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xf0, 100}, /* demod 1 reset */
558 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xf0, 100},
559 {EM2874_R80_GPIO_P0_CTRL, 0xd0, 0xf0, 100}, /* demod 2 reset */
560 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xf0, 100},
561 {EM2874_R5F_TS_ENABLE, 0x44, 0xff, 50},
562 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50},
563 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50},
564 {-1, -1, -1, -1},
565 };
566
567 /*
568 * Button definitions
569 */
570 static const struct em28xx_button std_snapshot_button[] = {
571 {
572 .role = EM28XX_BUTTON_SNAPSHOT,
573 .reg_r = EM28XX_R0C_USBSUSP,
574 .reg_clearing = EM28XX_R0C_USBSUSP,
575 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT,
576 .inverted = 0,
577 },
578 {-1, 0, 0, 0, 0},
579 };
580
581 static const struct em28xx_button speedlink_vad_laplace_buttons[] = {
582 {
583 .role = EM28XX_BUTTON_SNAPSHOT,
584 .reg_r = EM2874_R85_GPIO_P1_STATE,
585 .mask = 0x80,
586 .inverted = 1,
587 },
588 {
589 .role = EM28XX_BUTTON_ILLUMINATION,
590 .reg_r = EM2874_R84_GPIO_P0_STATE,
591 .mask = 0x08,
592 .inverted = 1,
593 },
594 {-1, 0, 0, 0, 0},
595 };
596
597 /*
598 * LED definitions
599 */
600 static struct em28xx_led speedlink_vad_laplace_leds[] = {
601 {
602 .role = EM28XX_LED_ANALOG_CAPTURING,
603 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
604 .gpio_mask = 0x01,
605 .inverted = 1,
606 },
607 {
608 .role = EM28XX_LED_ILLUMINATION,
609 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
610 .gpio_mask = 0x40,
611 .inverted = 1,
612 },
613 {-1, 0, 0, 0},
614 };
615
616 static struct em28xx_led kworld_ub435q_v3_leds[] = {
617 {
618 .role = EM28XX_LED_DIGITAL_CAPTURING,
619 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
620 .gpio_mask = 0x80,
621 .inverted = 1,
622 },
623 {-1, 0, 0, 0},
624 };
625
626 static struct em28xx_led pctv_80e_leds[] = {
627 {
628 .role = EM28XX_LED_DIGITAL_CAPTURING,
629 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
630 .gpio_mask = 0x80,
631 .inverted = 0,
632 },
633 {-1, 0, 0, 0},
634 };
635
636 static struct em28xx_led terratec_grabby_leds[] = {
637 {
638 .role = EM28XX_LED_ANALOG_CAPTURING,
639 .gpio_reg = EM2820_R08_GPIO_CTRL,
640 .gpio_mask = EM_GPIO_3,
641 .inverted = 1,
642 },
643 {-1, 0, 0, 0},
644 };
645
646 static struct em28xx_led hauppauge_dualhd_leds[] = {
647 {
648 .role = EM28XX_LED_DIGITAL_CAPTURING,
649 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
650 .gpio_mask = EM_GPIO_1,
651 .inverted = 1,
652 },
653 {
654 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2,
655 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
656 .gpio_mask = EM_GPIO_3,
657 .inverted = 1,
658 },
659 {-1, 0, 0, 0},
660 };
661
662 static struct em28xx_led hauppauge_usb_quadhd_leds[] = {
663 {
664 .role = EM28XX_LED_DIGITAL_CAPTURING,
665 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
666 .gpio_mask = EM_GPIO_2,
667 .inverted = 1,
668 },
669 {
670 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2,
671 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
672 .gpio_mask = EM_GPIO_0,
673 .inverted = 1,
674 },
675 {-1, 0, 0, 0},
676 };
677
678 /*
679 * Board definitions
680 */
681 const struct em28xx_board em28xx_boards[] = {
682 [EM2750_BOARD_UNKNOWN] = {
683 .name = "EM2710/EM2750/EM2751 webcam grabber",
684 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
685 .tuner_type = TUNER_ABSENT,
686 .is_webcam = 1,
687 .input = { {
688 .type = EM28XX_VMUX_COMPOSITE,
689 .vmux = 0,
690 .amux = EM28XX_AMUX_VIDEO,
691 .gpio = silvercrest_reg_seq,
692 } },
693 },
694 [EM2800_BOARD_UNKNOWN] = {
695 .name = "Unknown EM2800 video grabber",
696 .is_em2800 = 1,
697 .tda9887_conf = TDA9887_PRESENT,
698 .decoder = EM28XX_SAA711X,
699 .tuner_type = TUNER_ABSENT,
700 .input = { {
701 .type = EM28XX_VMUX_COMPOSITE,
702 .vmux = SAA7115_COMPOSITE0,
703 .amux = EM28XX_AMUX_LINE_IN,
704 }, {
705 .type = EM28XX_VMUX_SVIDEO,
706 .vmux = SAA7115_SVIDEO3,
707 .amux = EM28XX_AMUX_LINE_IN,
708 } },
709 },
710 [EM2820_BOARD_UNKNOWN] = {
711 .name = "Unknown EM2750/28xx video grabber",
712 .tuner_type = TUNER_ABSENT,
713 .is_webcam = 1, /* To enable sensor probe */
714 },
715 [EM2882_BOARD_ZOLID_HYBRID_TV_STICK] = {
716 .name = ":ZOLID HYBRID TV STICK",
717 .tuner_type = TUNER_XC2028,
718 .tuner_gpio = zolid_tuner,
719 .decoder = EM28XX_TVP5150,
720 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
721 .mts_firmware = 1,
722 .has_dvb = 1,
723 .dvb_gpio = zolid_digital,
724 },
725 [EM2750_BOARD_DLCW_130] = {
726 /* Beijing Huaqi Information Digital Technology Co., Ltd */
727 .name = "Huaqi DLCW-130",
728 .valid = EM28XX_BOARD_NOT_VALIDATED,
729 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
730 .tuner_type = TUNER_ABSENT,
731 .is_webcam = 1,
732 .input = { {
733 .type = EM28XX_VMUX_COMPOSITE,
734 .vmux = 0,
735 .amux = EM28XX_AMUX_VIDEO,
736 } },
737 },
738 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
739 .name = "Kworld PVR TV 2800 RF",
740 .tuner_type = TUNER_TEMIC_PAL,
741 .tda9887_conf = TDA9887_PRESENT,
742 .decoder = EM28XX_SAA711X,
743 .input = { {
744 .type = EM28XX_VMUX_COMPOSITE,
745 .vmux = SAA7115_COMPOSITE0,
746 .amux = EM28XX_AMUX_LINE_IN,
747 }, {
748 .type = EM28XX_VMUX_SVIDEO,
749 .vmux = SAA7115_SVIDEO3,
750 .amux = EM28XX_AMUX_LINE_IN,
751 } },
752 },
753 [EM2820_BOARD_GADMEI_TVR200] = {
754 .name = "Gadmei TVR200",
755 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
756 .tda9887_conf = TDA9887_PRESENT,
757 .decoder = EM28XX_SAA711X,
758 .input = { {
759 .type = EM28XX_VMUX_TELEVISION,
760 .vmux = SAA7115_COMPOSITE2,
761 .amux = EM28XX_AMUX_LINE_IN,
762 }, {
763 .type = EM28XX_VMUX_COMPOSITE,
764 .vmux = SAA7115_COMPOSITE0,
765 .amux = EM28XX_AMUX_LINE_IN,
766 }, {
767 .type = EM28XX_VMUX_SVIDEO,
768 .vmux = SAA7115_SVIDEO3,
769 .amux = EM28XX_AMUX_LINE_IN,
770 } },
771 },
772 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
773 .name = "Terratec Cinergy 250 USB",
774 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
775 .has_ir_i2c = 1,
776 .tda9887_conf = TDA9887_PRESENT,
777 .decoder = EM28XX_SAA711X,
778 .input = { {
779 .type = EM28XX_VMUX_TELEVISION,
780 .vmux = SAA7115_COMPOSITE2,
781 .amux = EM28XX_AMUX_VIDEO,
782 }, {
783 .type = EM28XX_VMUX_COMPOSITE,
784 .vmux = SAA7115_COMPOSITE0,
785 .amux = EM28XX_AMUX_LINE_IN,
786 }, {
787 .type = EM28XX_VMUX_SVIDEO,
788 .vmux = SAA7115_SVIDEO3,
789 .amux = EM28XX_AMUX_LINE_IN,
790 } },
791 },
792 [EM2820_BOARD_PINNACLE_USB_2] = {
793 .name = "Pinnacle PCTV USB 2",
794 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
795 .has_ir_i2c = 1,
796 .tda9887_conf = TDA9887_PRESENT,
797 .decoder = EM28XX_SAA711X,
798 .input = { {
799 .type = EM28XX_VMUX_TELEVISION,
800 .vmux = SAA7115_COMPOSITE2,
801 .amux = EM28XX_AMUX_VIDEO,
802 }, {
803 .type = EM28XX_VMUX_COMPOSITE,
804 .vmux = SAA7115_COMPOSITE0,
805 .amux = EM28XX_AMUX_LINE_IN,
806 }, {
807 .type = EM28XX_VMUX_SVIDEO,
808 .vmux = SAA7115_SVIDEO3,
809 .amux = EM28XX_AMUX_LINE_IN,
810 } },
811 },
812 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
813 .name = "Hauppauge WinTV USB 2",
814 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
815 .tda9887_conf = TDA9887_PRESENT |
816 TDA9887_PORT1_ACTIVE |
817 TDA9887_PORT2_ACTIVE,
818 .decoder = EM28XX_TVP5150,
819 .has_msp34xx = 1,
820 .has_ir_i2c = 1,
821 .input = { {
822 .type = EM28XX_VMUX_TELEVISION,
823 .vmux = TVP5150_COMPOSITE0,
824 .amux = MSP_INPUT_DEFAULT,
825 }, {
826 .type = EM28XX_VMUX_SVIDEO,
827 .vmux = TVP5150_SVIDEO,
828 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
829 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
830 } },
831 },
832 [EM2820_BOARD_DLINK_USB_TV] = {
833 .name = "D-Link DUB-T210 TV Tuner",
834 .valid = EM28XX_BOARD_NOT_VALIDATED,
835 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
836 .tda9887_conf = TDA9887_PRESENT,
837 .decoder = EM28XX_SAA711X,
838 .input = { {
839 .type = EM28XX_VMUX_TELEVISION,
840 .vmux = SAA7115_COMPOSITE2,
841 .amux = EM28XX_AMUX_LINE_IN,
842 }, {
843 .type = EM28XX_VMUX_COMPOSITE,
844 .vmux = SAA7115_COMPOSITE0,
845 .amux = EM28XX_AMUX_LINE_IN,
846 }, {
847 .type = EM28XX_VMUX_SVIDEO,
848 .vmux = SAA7115_SVIDEO3,
849 .amux = EM28XX_AMUX_LINE_IN,
850 } },
851 },
852 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
853 .name = "Hercules Smart TV USB 2.0",
854 .valid = EM28XX_BOARD_NOT_VALIDATED,
855 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
856 .tda9887_conf = TDA9887_PRESENT,
857 .decoder = EM28XX_SAA711X,
858 .input = { {
859 .type = EM28XX_VMUX_TELEVISION,
860 .vmux = SAA7115_COMPOSITE2,
861 .amux = EM28XX_AMUX_LINE_IN,
862 }, {
863 .type = EM28XX_VMUX_COMPOSITE,
864 .vmux = SAA7115_COMPOSITE0,
865 .amux = EM28XX_AMUX_LINE_IN,
866 }, {
867 .type = EM28XX_VMUX_SVIDEO,
868 .vmux = SAA7115_SVIDEO3,
869 .amux = EM28XX_AMUX_LINE_IN,
870 } },
871 },
872 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
873 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
874 .valid = EM28XX_BOARD_NOT_VALIDATED,
875 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
876 .tda9887_conf = TDA9887_PRESENT,
877 .decoder = EM28XX_SAA711X,
878 .input = { {
879 .type = EM28XX_VMUX_TELEVISION,
880 .vmux = SAA7115_COMPOSITE2,
881 .amux = EM28XX_AMUX_VIDEO,
882 }, {
883 .type = EM28XX_VMUX_COMPOSITE,
884 .vmux = SAA7115_COMPOSITE0,
885 .amux = EM28XX_AMUX_LINE_IN,
886 }, {
887 .type = EM28XX_VMUX_SVIDEO,
888 .vmux = SAA7115_SVIDEO3,
889 .amux = EM28XX_AMUX_LINE_IN,
890 } },
891 },
892 [EM2820_BOARD_GADMEI_UTV310] = {
893 .name = "Gadmei UTV310",
894 .valid = EM28XX_BOARD_NOT_VALIDATED,
895 .tuner_type = TUNER_TNF_5335MF,
896 .tda9887_conf = TDA9887_PRESENT,
897 .decoder = EM28XX_SAA711X,
898 .input = { {
899 .type = EM28XX_VMUX_TELEVISION,
900 .vmux = SAA7115_COMPOSITE1,
901 .amux = EM28XX_AMUX_LINE_IN,
902 }, {
903 .type = EM28XX_VMUX_COMPOSITE,
904 .vmux = SAA7115_COMPOSITE0,
905 .amux = EM28XX_AMUX_LINE_IN,
906 }, {
907 .type = EM28XX_VMUX_SVIDEO,
908 .vmux = SAA7115_SVIDEO3,
909 .amux = EM28XX_AMUX_LINE_IN,
910 } },
911 },
912 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
913 .name = "Leadtek Winfast USB II Deluxe",
914 .valid = EM28XX_BOARD_NOT_VALIDATED,
915 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
916 .has_ir_i2c = 1,
917 .tvaudio_addr = 0x58,
918 .tda9887_conf = TDA9887_PRESENT |
919 TDA9887_PORT2_ACTIVE |
920 TDA9887_QSS,
921 .decoder = EM28XX_SAA711X,
922 .adecoder = EM28XX_TVAUDIO,
923 .input = { {
924 .type = EM28XX_VMUX_TELEVISION,
925 .vmux = SAA7115_COMPOSITE4,
926 .amux = EM28XX_AMUX_AUX,
927 }, {
928 .type = EM28XX_VMUX_COMPOSITE,
929 .vmux = SAA7115_COMPOSITE5,
930 .amux = EM28XX_AMUX_LINE_IN,
931 }, {
932 .type = EM28XX_VMUX_SVIDEO,
933 .vmux = SAA7115_SVIDEO3,
934 .amux = EM28XX_AMUX_LINE_IN,
935 } },
936 .radio = {
937 .type = EM28XX_RADIO,
938 .amux = EM28XX_AMUX_AUX,
939 }
940 },
941 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
942 .name = "Videology 20K14XUSB USB2.0",
943 .valid = EM28XX_BOARD_NOT_VALIDATED,
944 .tuner_type = TUNER_ABSENT,
945 .is_webcam = 1,
946 .input = { {
947 .type = EM28XX_VMUX_COMPOSITE,
948 .vmux = 0,
949 .amux = EM28XX_AMUX_VIDEO,
950 } },
951 },
952 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
953 .name = "Silvercrest Webcam 1.3mpix",
954 .tuner_type = TUNER_ABSENT,
955 .is_webcam = 1,
956 .input = { {
957 .type = EM28XX_VMUX_COMPOSITE,
958 .vmux = 0,
959 .amux = EM28XX_AMUX_VIDEO,
960 .gpio = silvercrest_reg_seq,
961 } },
962 },
963 [EM2821_BOARD_SUPERCOMP_USB_2] = {
964 .name = "Supercomp USB 2.0 TV",
965 .valid = EM28XX_BOARD_NOT_VALIDATED,
966 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
967 .tda9887_conf = TDA9887_PRESENT |
968 TDA9887_PORT1_ACTIVE |
969 TDA9887_PORT2_ACTIVE,
970 .decoder = EM28XX_SAA711X,
971 .input = { {
972 .type = EM28XX_VMUX_TELEVISION,
973 .vmux = SAA7115_COMPOSITE2,
974 .amux = EM28XX_AMUX_LINE_IN,
975 }, {
976 .type = EM28XX_VMUX_COMPOSITE,
977 .vmux = SAA7115_COMPOSITE0,
978 .amux = EM28XX_AMUX_VIDEO,
979 }, {
980 .type = EM28XX_VMUX_SVIDEO,
981 .vmux = SAA7115_SVIDEO3,
982 .amux = EM28XX_AMUX_LINE_IN,
983 } },
984 },
985 [EM2821_BOARD_USBGEAR_VD204] = {
986 .name = "Usbgear VD204v9",
987 .valid = EM28XX_BOARD_NOT_VALIDATED,
988 .tuner_type = TUNER_ABSENT, /* Capture only device */
989 .decoder = EM28XX_SAA711X,
990 .input = { {
991 .type = EM28XX_VMUX_COMPOSITE,
992 .vmux = SAA7115_COMPOSITE0,
993 .amux = EM28XX_AMUX_LINE_IN,
994 }, {
995 .type = EM28XX_VMUX_SVIDEO,
996 .vmux = SAA7115_SVIDEO3,
997 .amux = EM28XX_AMUX_LINE_IN,
998 } },
999 },
1000 [EM2860_BOARD_NETGMBH_CAM] = {
1001 /* Beijing Huaqi Information Digital Technology Co., Ltd */
1002 .name = "NetGMBH Cam",
1003 .valid = EM28XX_BOARD_NOT_VALIDATED,
1004 .tuner_type = TUNER_ABSENT,
1005 .is_webcam = 1,
1006 .input = { {
1007 .type = EM28XX_VMUX_COMPOSITE,
1008 .vmux = 0,
1009 .amux = EM28XX_AMUX_VIDEO,
1010 } },
1011 },
1012 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
1013 .name = "Typhoon DVD Maker",
1014 .decoder = EM28XX_SAA711X,
1015 .tuner_type = TUNER_ABSENT, /* Capture only device */
1016 .input = { {
1017 .type = EM28XX_VMUX_COMPOSITE,
1018 .vmux = SAA7115_COMPOSITE0,
1019 .amux = EM28XX_AMUX_LINE_IN,
1020 }, {
1021 .type = EM28XX_VMUX_SVIDEO,
1022 .vmux = SAA7115_SVIDEO3,
1023 .amux = EM28XX_AMUX_LINE_IN,
1024 } },
1025 },
1026 [EM2860_BOARD_GADMEI_UTV330] = {
1027 .name = "Gadmei UTV330",
1028 .valid = EM28XX_BOARD_NOT_VALIDATED,
1029 .tuner_type = TUNER_TNF_5335MF,
1030 .tda9887_conf = TDA9887_PRESENT,
1031 .decoder = EM28XX_SAA711X,
1032 .input = { {
1033 .type = EM28XX_VMUX_TELEVISION,
1034 .vmux = SAA7115_COMPOSITE2,
1035 .amux = EM28XX_AMUX_VIDEO,
1036 }, {
1037 .type = EM28XX_VMUX_COMPOSITE,
1038 .vmux = SAA7115_COMPOSITE0,
1039 .amux = EM28XX_AMUX_LINE_IN,
1040 }, {
1041 .type = EM28XX_VMUX_SVIDEO,
1042 .vmux = SAA7115_SVIDEO3,
1043 .amux = EM28XX_AMUX_LINE_IN,
1044 } },
1045 },
1046 [EM2861_BOARD_GADMEI_UTV330PLUS] = {
1047 .name = "Gadmei UTV330+",
1048 .tuner_type = TUNER_TNF_5335MF,
1049 .tda9887_conf = TDA9887_PRESENT,
1050 .ir_codes = RC_MAP_GADMEI_RM008Z,
1051 .decoder = EM28XX_SAA711X,
1052 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1053 .input = { {
1054 .type = EM28XX_VMUX_TELEVISION,
1055 .vmux = SAA7115_COMPOSITE2,
1056 .amux = EM28XX_AMUX_VIDEO,
1057 }, {
1058 .type = EM28XX_VMUX_COMPOSITE,
1059 .vmux = SAA7115_COMPOSITE0,
1060 .amux = EM28XX_AMUX_LINE_IN,
1061 }, {
1062 .type = EM28XX_VMUX_SVIDEO,
1063 .vmux = SAA7115_SVIDEO3,
1064 .amux = EM28XX_AMUX_LINE_IN,
1065 } },
1066 },
1067 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
1068 .name = "Terratec Cinergy A Hybrid XS",
1069 .valid = EM28XX_BOARD_NOT_VALIDATED,
1070 .tuner_type = TUNER_XC2028,
1071 .tuner_gpio = default_tuner_gpio,
1072 .decoder = EM28XX_TVP5150,
1073
1074 .input = { {
1075 .type = EM28XX_VMUX_TELEVISION,
1076 .vmux = TVP5150_COMPOSITE0,
1077 .amux = EM28XX_AMUX_VIDEO,
1078 .gpio = hauppauge_wintv_hvr_900_analog,
1079 }, {
1080 .type = EM28XX_VMUX_COMPOSITE,
1081 .vmux = TVP5150_COMPOSITE1,
1082 .amux = EM28XX_AMUX_LINE_IN,
1083 .gpio = hauppauge_wintv_hvr_900_analog,
1084 }, {
1085 .type = EM28XX_VMUX_SVIDEO,
1086 .vmux = TVP5150_SVIDEO,
1087 .amux = EM28XX_AMUX_LINE_IN,
1088 .gpio = hauppauge_wintv_hvr_900_analog,
1089 } },
1090 },
1091 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
1092 .name = "KWorld PVRTV 300U",
1093 .valid = EM28XX_BOARD_NOT_VALIDATED,
1094 .tuner_type = TUNER_XC2028,
1095 .tuner_gpio = default_tuner_gpio,
1096 .decoder = EM28XX_TVP5150,
1097 .input = { {
1098 .type = EM28XX_VMUX_TELEVISION,
1099 .vmux = TVP5150_COMPOSITE0,
1100 .amux = EM28XX_AMUX_VIDEO,
1101 }, {
1102 .type = EM28XX_VMUX_COMPOSITE,
1103 .vmux = TVP5150_COMPOSITE1,
1104 .amux = EM28XX_AMUX_LINE_IN,
1105 }, {
1106 .type = EM28XX_VMUX_SVIDEO,
1107 .vmux = TVP5150_SVIDEO,
1108 .amux = EM28XX_AMUX_LINE_IN,
1109 } },
1110 },
1111 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
1112 .name = "Yakumo MovieMixer",
1113 .tuner_type = TUNER_ABSENT, /* Capture only device */
1114 .decoder = EM28XX_TVP5150,
1115 .input = { {
1116 .type = EM28XX_VMUX_TELEVISION,
1117 .vmux = TVP5150_COMPOSITE0,
1118 .amux = EM28XX_AMUX_VIDEO,
1119 }, {
1120 .type = EM28XX_VMUX_COMPOSITE,
1121 .vmux = TVP5150_COMPOSITE1,
1122 .amux = EM28XX_AMUX_LINE_IN,
1123 }, {
1124 .type = EM28XX_VMUX_SVIDEO,
1125 .vmux = TVP5150_SVIDEO,
1126 .amux = EM28XX_AMUX_LINE_IN,
1127 } },
1128 },
1129 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
1130 .name = "EM2860/TVP5150 Reference Design",
1131 .tuner_type = TUNER_ABSENT, /* Capture only device */
1132 .decoder = EM28XX_TVP5150,
1133 .input = { {
1134 .type = EM28XX_VMUX_COMPOSITE,
1135 .vmux = TVP5150_COMPOSITE1,
1136 .amux = EM28XX_AMUX_LINE_IN,
1137 }, {
1138 .type = EM28XX_VMUX_SVIDEO,
1139 .vmux = TVP5150_SVIDEO,
1140 .amux = EM28XX_AMUX_LINE_IN,
1141 } },
1142 },
1143 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
1144 .name = "Plextor ConvertX PX-TV100U",
1145 .tuner_type = TUNER_TNF_5335MF,
1146 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
1147 EM28XX_XCLK_FREQUENCY_12MHZ,
1148 .tda9887_conf = TDA9887_PRESENT,
1149 .decoder = EM28XX_TVP5150,
1150 .has_msp34xx = 1,
1151 .input = { {
1152 .type = EM28XX_VMUX_TELEVISION,
1153 .vmux = TVP5150_COMPOSITE0,
1154 .amux = EM28XX_AMUX_LINE_IN,
1155 .gpio = pinnacle_hybrid_pro_analog,
1156 }, {
1157 .type = EM28XX_VMUX_COMPOSITE,
1158 .vmux = TVP5150_COMPOSITE1,
1159 .amux = EM28XX_AMUX_LINE_IN,
1160 .gpio = pinnacle_hybrid_pro_analog,
1161 }, {
1162 .type = EM28XX_VMUX_SVIDEO,
1163 .vmux = TVP5150_SVIDEO,
1164 .amux = EM28XX_AMUX_LINE_IN,
1165 .gpio = pinnacle_hybrid_pro_analog,
1166 } },
1167 },
1168
1169 /* Those boards with em2870 are DVB Only*/
1170
1171 [EM2870_BOARD_TERRATEC_XS] = {
1172 .name = "Terratec Cinergy T XS",
1173 .valid = EM28XX_BOARD_NOT_VALIDATED,
1174 .tuner_type = TUNER_XC2028,
1175 .tuner_gpio = default_tuner_gpio,
1176 },
1177 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
1178 .name = "Terratec Cinergy T XS (MT2060)",
1179 .xclk = EM28XX_XCLK_IR_RC5_MODE |
1180 EM28XX_XCLK_FREQUENCY_12MHZ,
1181 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1182 .tuner_type = TUNER_ABSENT, /* MT2060 */
1183 .has_dvb = 1,
1184 .tuner_gpio = default_tuner_gpio,
1185 },
1186 [EM2870_BOARD_KWORLD_350U] = {
1187 .name = "Kworld 350 U DVB-T",
1188 .valid = EM28XX_BOARD_NOT_VALIDATED,
1189 .tuner_type = TUNER_XC2028,
1190 .tuner_gpio = default_tuner_gpio,
1191 },
1192 [EM2870_BOARD_KWORLD_355U] = {
1193 .name = "Kworld 355 U DVB-T",
1194 .valid = EM28XX_BOARD_NOT_VALIDATED,
1195 .tuner_type = TUNER_ABSENT,
1196 .tuner_gpio = default_tuner_gpio,
1197 .has_dvb = 1,
1198 .dvb_gpio = default_digital,
1199 },
1200 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
1201 .name = "Pinnacle PCTV DVB-T",
1202 .valid = EM28XX_BOARD_NOT_VALIDATED,
1203 .tuner_type = TUNER_ABSENT, /* MT2060 */
1204 /* djh - I have serious doubts this is right... */
1205 .xclk = EM28XX_XCLK_IR_RC5_MODE |
1206 EM28XX_XCLK_FREQUENCY_10MHZ,
1207 },
1208 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
1209 .name = "Compro, VideoMate U3",
1210 .valid = EM28XX_BOARD_NOT_VALIDATED,
1211 .tuner_type = TUNER_ABSENT, /* MT2060 */
1212 },
1213
1214 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
1215 .name = "Terratec Hybrid XS Secam",
1216 .has_msp34xx = 1,
1217 .tuner_type = TUNER_XC2028,
1218 .tuner_gpio = default_tuner_gpio,
1219 .decoder = EM28XX_TVP5150,
1220 .has_dvb = 1,
1221 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
1222 .input = { {
1223 .type = EM28XX_VMUX_TELEVISION,
1224 .vmux = TVP5150_COMPOSITE0,
1225 .amux = EM28XX_AMUX_VIDEO,
1226 .gpio = terratec_cinergy_USB_XS_FR_analog,
1227 }, {
1228 .type = EM28XX_VMUX_COMPOSITE,
1229 .vmux = TVP5150_COMPOSITE1,
1230 .amux = EM28XX_AMUX_LINE_IN,
1231 .gpio = terratec_cinergy_USB_XS_FR_analog,
1232 }, {
1233 .type = EM28XX_VMUX_SVIDEO,
1234 .vmux = TVP5150_SVIDEO,
1235 .amux = EM28XX_AMUX_LINE_IN,
1236 .gpio = terratec_cinergy_USB_XS_FR_analog,
1237 } },
1238 },
1239 [EM2884_BOARD_TERRATEC_H5] = {
1240 .name = "Terratec Cinergy H5",
1241 .has_dvb = 1,
1242 #if 0
1243 .tuner_type = TUNER_PHILIPS_TDA8290,
1244 .tuner_addr = 0x41,
1245 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
1246 .tuner_gpio = terratec_h5_gpio,
1247 #else
1248 .tuner_type = TUNER_ABSENT,
1249 #endif
1250 .def_i2c_bus = 1,
1251 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1252 EM28XX_I2C_FREQ_400_KHZ,
1253 },
1254 [EM2884_BOARD_TERRATEC_H6] = {
1255 .name = "Terratec Cinergy H6 rev. 2",
1256 .has_dvb = 1,
1257 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
1258 #if 0
1259 .tuner_type = TUNER_PHILIPS_TDA8290,
1260 .tuner_addr = 0x41,
1261 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
1262 .tuner_gpio = terratec_h5_gpio,
1263 #else
1264 .tuner_type = TUNER_ABSENT,
1265 #endif
1266 .def_i2c_bus = 1,
1267 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1268 EM28XX_I2C_FREQ_400_KHZ,
1269 },
1270 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
1271 .name = "Hauppauge WinTV HVR 930C",
1272 .has_dvb = 1,
1273 #if 0 /* FIXME: Add analog support */
1274 .tuner_type = TUNER_XC5000,
1275 .tuner_addr = 0x41,
1276 .dvb_gpio = hauppauge_930c_digital,
1277 .tuner_gpio = hauppauge_930c_gpio,
1278 #else
1279 .tuner_type = TUNER_ABSENT,
1280 #endif
1281 .ir_codes = RC_MAP_HAUPPAUGE,
1282 .def_i2c_bus = 1,
1283 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1284 EM28XX_I2C_FREQ_400_KHZ,
1285 },
1286 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = {
1287 .name = "C3 Tech Digital Duo HDTV/SDTV USB",
1288 .has_dvb = 1,
1289 /* FIXME: Add analog support - need a saa7136 driver */
1290 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
1291 .ir_codes = RC_MAP_EMPTY,
1292 .def_i2c_bus = 1,
1293 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1294 .dvb_gpio = c3tech_digital_duo_digital,
1295 },
1296 [EM2884_BOARD_CINERGY_HTC_STICK] = {
1297 .name = "Terratec Cinergy HTC Stick",
1298 .has_dvb = 1,
1299 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
1300 .tuner_type = TUNER_ABSENT,
1301 .def_i2c_bus = 1,
1302 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1303 EM28XX_I2C_FREQ_400_KHZ,
1304 },
1305 [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = {
1306 .name = "Elgato EyeTV Hybrid 2008 INT",
1307 .has_dvb = 1,
1308 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
1309 .tuner_type = TUNER_ABSENT,
1310 .def_i2c_bus = 1,
1311 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1312 EM28XX_I2C_FREQ_400_KHZ,
1313 },
1314 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
1315 .name = "Hauppauge WinTV HVR 900",
1316 .tda9887_conf = TDA9887_PRESENT,
1317 .tuner_type = TUNER_XC2028,
1318 .tuner_gpio = default_tuner_gpio,
1319 .mts_firmware = 1,
1320 .has_dvb = 1,
1321 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1322 .ir_codes = RC_MAP_HAUPPAUGE,
1323 .decoder = EM28XX_TVP5150,
1324 .input = { {
1325 .type = EM28XX_VMUX_TELEVISION,
1326 .vmux = TVP5150_COMPOSITE0,
1327 .amux = EM28XX_AMUX_VIDEO,
1328 .gpio = hauppauge_wintv_hvr_900_analog,
1329 }, {
1330 .type = EM28XX_VMUX_COMPOSITE,
1331 .vmux = TVP5150_COMPOSITE1,
1332 .amux = EM28XX_AMUX_LINE_IN,
1333 .gpio = hauppauge_wintv_hvr_900_analog,
1334 }, {
1335 .type = EM28XX_VMUX_SVIDEO,
1336 .vmux = TVP5150_SVIDEO,
1337 .amux = EM28XX_AMUX_LINE_IN,
1338 .gpio = hauppauge_wintv_hvr_900_analog,
1339 } },
1340 },
1341 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
1342 .name = "Hauppauge WinTV HVR 900 (R2)",
1343 .tda9887_conf = TDA9887_PRESENT,
1344 .tuner_type = TUNER_XC2028,
1345 .tuner_gpio = default_tuner_gpio,
1346 .mts_firmware = 1,
1347 .has_dvb = 1,
1348 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1349 .ir_codes = RC_MAP_HAUPPAUGE,
1350 .decoder = EM28XX_TVP5150,
1351 .input = { {
1352 .type = EM28XX_VMUX_TELEVISION,
1353 .vmux = TVP5150_COMPOSITE0,
1354 .amux = EM28XX_AMUX_VIDEO,
1355 .gpio = hauppauge_wintv_hvr_900_analog,
1356 }, {
1357 .type = EM28XX_VMUX_COMPOSITE,
1358 .vmux = TVP5150_COMPOSITE1,
1359 .amux = EM28XX_AMUX_LINE_IN,
1360 .gpio = hauppauge_wintv_hvr_900_analog,
1361 }, {
1362 .type = EM28XX_VMUX_SVIDEO,
1363 .vmux = TVP5150_SVIDEO,
1364 .amux = EM28XX_AMUX_LINE_IN,
1365 .gpio = hauppauge_wintv_hvr_900_analog,
1366 } },
1367 },
1368 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
1369 .name = "Hauppauge WinTV HVR 850",
1370 .tuner_type = TUNER_XC2028,
1371 .tuner_gpio = default_tuner_gpio,
1372 .mts_firmware = 1,
1373 .has_dvb = 1,
1374 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1375 .ir_codes = RC_MAP_HAUPPAUGE,
1376 .decoder = EM28XX_TVP5150,
1377 .input = { {
1378 .type = EM28XX_VMUX_TELEVISION,
1379 .vmux = TVP5150_COMPOSITE0,
1380 .amux = EM28XX_AMUX_VIDEO,
1381 .gpio = hauppauge_wintv_hvr_900_analog,
1382 }, {
1383 .type = EM28XX_VMUX_COMPOSITE,
1384 .vmux = TVP5150_COMPOSITE1,
1385 .amux = EM28XX_AMUX_LINE_IN,
1386 .gpio = hauppauge_wintv_hvr_900_analog,
1387 }, {
1388 .type = EM28XX_VMUX_SVIDEO,
1389 .vmux = TVP5150_SVIDEO,
1390 .amux = EM28XX_AMUX_LINE_IN,
1391 .gpio = hauppauge_wintv_hvr_900_analog,
1392 } },
1393 },
1394 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
1395 .name = "Hauppauge WinTV HVR 950",
1396 .tuner_type = TUNER_XC2028,
1397 .tuner_gpio = default_tuner_gpio,
1398 .mts_firmware = 1,
1399 .has_dvb = 1,
1400 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1401 .ir_codes = RC_MAP_HAUPPAUGE,
1402 .decoder = EM28XX_TVP5150,
1403 .input = { {
1404 .type = EM28XX_VMUX_TELEVISION,
1405 .vmux = TVP5150_COMPOSITE0,
1406 .amux = EM28XX_AMUX_VIDEO,
1407 .gpio = hauppauge_wintv_hvr_900_analog,
1408 }, {
1409 .type = EM28XX_VMUX_COMPOSITE,
1410 .vmux = TVP5150_COMPOSITE1,
1411 .amux = EM28XX_AMUX_LINE_IN,
1412 .gpio = hauppauge_wintv_hvr_900_analog,
1413 }, {
1414 .type = EM28XX_VMUX_SVIDEO,
1415 .vmux = TVP5150_SVIDEO,
1416 .amux = EM28XX_AMUX_LINE_IN,
1417 .gpio = hauppauge_wintv_hvr_900_analog,
1418 } },
1419 },
1420 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
1421 .name = "Pinnacle PCTV HD Pro Stick",
1422 .tuner_type = TUNER_XC2028,
1423 .tuner_gpio = default_tuner_gpio,
1424 .mts_firmware = 1,
1425 .has_dvb = 1,
1426 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1427 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1428 .decoder = EM28XX_TVP5150,
1429 .input = { {
1430 .type = EM28XX_VMUX_TELEVISION,
1431 .vmux = TVP5150_COMPOSITE0,
1432 .amux = EM28XX_AMUX_VIDEO,
1433 .gpio = hauppauge_wintv_hvr_900_analog,
1434 }, {
1435 .type = EM28XX_VMUX_COMPOSITE,
1436 .vmux = TVP5150_COMPOSITE1,
1437 .amux = EM28XX_AMUX_LINE_IN,
1438 .gpio = hauppauge_wintv_hvr_900_analog,
1439 }, {
1440 .type = EM28XX_VMUX_SVIDEO,
1441 .vmux = TVP5150_SVIDEO,
1442 .amux = EM28XX_AMUX_LINE_IN,
1443 .gpio = hauppauge_wintv_hvr_900_analog,
1444 } },
1445 },
1446 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
1447 .name = "AMD ATI TV Wonder HD 600",
1448 .tuner_type = TUNER_XC2028,
1449 .tuner_gpio = default_tuner_gpio,
1450 .mts_firmware = 1,
1451 .has_dvb = 1,
1452 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1453 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
1454 .decoder = EM28XX_TVP5150,
1455 .input = { {
1456 .type = EM28XX_VMUX_TELEVISION,
1457 .vmux = TVP5150_COMPOSITE0,
1458 .amux = EM28XX_AMUX_VIDEO,
1459 .gpio = hauppauge_wintv_hvr_900_analog,
1460 }, {
1461 .type = EM28XX_VMUX_COMPOSITE,
1462 .vmux = TVP5150_COMPOSITE1,
1463 .amux = EM28XX_AMUX_LINE_IN,
1464 .gpio = hauppauge_wintv_hvr_900_analog,
1465 }, {
1466 .type = EM28XX_VMUX_SVIDEO,
1467 .vmux = TVP5150_SVIDEO,
1468 .amux = EM28XX_AMUX_LINE_IN,
1469 .gpio = hauppauge_wintv_hvr_900_analog,
1470 } },
1471 },
1472 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
1473 .name = "Terratec Hybrid XS",
1474 .tuner_type = TUNER_XC2028,
1475 .tuner_gpio = default_tuner_gpio,
1476 .decoder = EM28XX_TVP5150,
1477 .has_dvb = 1,
1478 .dvb_gpio = default_digital,
1479 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1480 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1481 .input = { {
1482 .type = EM28XX_VMUX_TELEVISION,
1483 .vmux = TVP5150_COMPOSITE0,
1484 .amux = EM28XX_AMUX_VIDEO,
1485 .gpio = default_analog,
1486 }, {
1487 .type = EM28XX_VMUX_COMPOSITE,
1488 .vmux = TVP5150_COMPOSITE1,
1489 .amux = EM28XX_AMUX_LINE_IN,
1490 .gpio = default_analog,
1491 }, {
1492 .type = EM28XX_VMUX_SVIDEO,
1493 .vmux = TVP5150_SVIDEO,
1494 .amux = EM28XX_AMUX_LINE_IN,
1495 .gpio = default_analog,
1496 } },
1497 },
1498 /*
1499 * maybe there's a reason behind it why Terratec sells the Hybrid XS
1500 * as Prodigy XS with a different PID, let's keep it separated for now
1501 * maybe we'll need it later on
1502 */
1503 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1504 .name = "Terratec Prodigy XS",
1505 .tuner_type = TUNER_XC2028,
1506 .tuner_gpio = default_tuner_gpio,
1507 .decoder = EM28XX_TVP5150,
1508 .input = { {
1509 .type = EM28XX_VMUX_TELEVISION,
1510 .vmux = TVP5150_COMPOSITE0,
1511 .amux = EM28XX_AMUX_VIDEO,
1512 .gpio = hauppauge_wintv_hvr_900_analog,
1513 }, {
1514 .type = EM28XX_VMUX_COMPOSITE,
1515 .vmux = TVP5150_COMPOSITE1,
1516 .amux = EM28XX_AMUX_LINE_IN,
1517 .gpio = hauppauge_wintv_hvr_900_analog,
1518 }, {
1519 .type = EM28XX_VMUX_SVIDEO,
1520 .vmux = TVP5150_SVIDEO,
1521 .amux = EM28XX_AMUX_LINE_IN,
1522 .gpio = hauppauge_wintv_hvr_900_analog,
1523 } },
1524 },
1525 [EM2820_BOARD_MSI_VOX_USB_2] = {
1526 .name = "MSI VOX USB 2.0",
1527 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1528 .tda9887_conf = TDA9887_PRESENT |
1529 TDA9887_PORT1_ACTIVE |
1530 TDA9887_PORT2_ACTIVE,
1531 .max_range_640_480 = 1,
1532 .decoder = EM28XX_SAA711X,
1533 .input = { {
1534 .type = EM28XX_VMUX_TELEVISION,
1535 .vmux = SAA7115_COMPOSITE4,
1536 .amux = EM28XX_AMUX_VIDEO,
1537 }, {
1538 .type = EM28XX_VMUX_COMPOSITE,
1539 .vmux = SAA7115_COMPOSITE0,
1540 .amux = EM28XX_AMUX_LINE_IN,
1541 }, {
1542 .type = EM28XX_VMUX_SVIDEO,
1543 .vmux = SAA7115_SVIDEO3,
1544 .amux = EM28XX_AMUX_LINE_IN,
1545 } },
1546 },
1547 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1548 .name = "Terratec Cinergy 200 USB",
1549 .is_em2800 = 1,
1550 .has_ir_i2c = 1,
1551 .tuner_type = TUNER_LG_TALN,
1552 .tda9887_conf = TDA9887_PRESENT,
1553 .decoder = EM28XX_SAA711X,
1554 .input = { {
1555 .type = EM28XX_VMUX_TELEVISION,
1556 .vmux = SAA7115_COMPOSITE2,
1557 .amux = EM28XX_AMUX_VIDEO,
1558 }, {
1559 .type = EM28XX_VMUX_COMPOSITE,
1560 .vmux = SAA7115_COMPOSITE0,
1561 .amux = EM28XX_AMUX_LINE_IN,
1562 }, {
1563 .type = EM28XX_VMUX_SVIDEO,
1564 .vmux = SAA7115_SVIDEO3,
1565 .amux = EM28XX_AMUX_LINE_IN,
1566 } },
1567 },
1568 [EM2800_BOARD_GRABBEEX_USB2800] = {
1569 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1570 .is_em2800 = 1,
1571 .decoder = EM28XX_SAA711X,
1572 .tuner_type = TUNER_ABSENT, /* capture only board */
1573 .input = { {
1574 .type = EM28XX_VMUX_COMPOSITE,
1575 .vmux = SAA7115_COMPOSITE0,
1576 .amux = EM28XX_AMUX_LINE_IN,
1577 }, {
1578 .type = EM28XX_VMUX_SVIDEO,
1579 .vmux = SAA7115_SVIDEO3,
1580 .amux = EM28XX_AMUX_LINE_IN,
1581 } },
1582 },
1583 [EM2800_BOARD_VC211A] = {
1584 .name = "Actionmaster/LinXcel/Digitus VC211A",
1585 .is_em2800 = 1,
1586 .tuner_type = TUNER_ABSENT, /* Capture-only board */
1587 .decoder = EM28XX_SAA711X,
1588 .input = { {
1589 .type = EM28XX_VMUX_COMPOSITE,
1590 .vmux = SAA7115_COMPOSITE0,
1591 .amux = EM28XX_AMUX_LINE_IN,
1592 .gpio = vc211a_enable,
1593 }, {
1594 .type = EM28XX_VMUX_SVIDEO,
1595 .vmux = SAA7115_SVIDEO3,
1596 .amux = EM28XX_AMUX_LINE_IN,
1597 .gpio = vc211a_enable,
1598 } },
1599 },
1600 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1601 .name = "Leadtek Winfast USB II",
1602 .is_em2800 = 1,
1603 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1604 .tda9887_conf = TDA9887_PRESENT,
1605 .decoder = EM28XX_SAA711X,
1606 .input = { {
1607 .type = EM28XX_VMUX_TELEVISION,
1608 .vmux = SAA7115_COMPOSITE2,
1609 .amux = EM28XX_AMUX_VIDEO,
1610 }, {
1611 .type = EM28XX_VMUX_COMPOSITE,
1612 .vmux = SAA7115_COMPOSITE0,
1613 .amux = EM28XX_AMUX_LINE_IN,
1614 }, {
1615 .type = EM28XX_VMUX_SVIDEO,
1616 .vmux = SAA7115_SVIDEO3,
1617 .amux = EM28XX_AMUX_LINE_IN,
1618 } },
1619 },
1620 [EM2800_BOARD_KWORLD_USB2800] = {
1621 .name = "Kworld USB2800",
1622 .is_em2800 = 1,
1623 .tuner_type = TUNER_PHILIPS_FCV1236D,
1624 .tda9887_conf = TDA9887_PRESENT,
1625 .decoder = EM28XX_SAA711X,
1626 .input = { {
1627 .type = EM28XX_VMUX_TELEVISION,
1628 .vmux = SAA7115_COMPOSITE2,
1629 .amux = EM28XX_AMUX_VIDEO,
1630 }, {
1631 .type = EM28XX_VMUX_COMPOSITE,
1632 .vmux = SAA7115_COMPOSITE0,
1633 .amux = EM28XX_AMUX_LINE_IN,
1634 }, {
1635 .type = EM28XX_VMUX_SVIDEO,
1636 .vmux = SAA7115_SVIDEO3,
1637 .amux = EM28XX_AMUX_LINE_IN,
1638 } },
1639 },
1640 [EM2820_BOARD_PINNACLE_DVC_90] = {
1641 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
1642 .tuner_type = TUNER_ABSENT, /* capture only board */
1643 .decoder = EM28XX_SAA711X,
1644 .input = { {
1645 .type = EM28XX_VMUX_COMPOSITE,
1646 .vmux = SAA7115_COMPOSITE0,
1647 .amux = EM28XX_AMUX_LINE_IN,
1648 }, {
1649 .type = EM28XX_VMUX_SVIDEO,
1650 .vmux = SAA7115_SVIDEO3,
1651 .amux = EM28XX_AMUX_LINE_IN,
1652 } },
1653 },
1654 [EM2800_BOARD_VGEAR_POCKETTV] = {
1655 .name = "V-Gear PocketTV",
1656 .is_em2800 = 1,
1657 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1658 .tda9887_conf = TDA9887_PRESENT,
1659 .decoder = EM28XX_SAA711X,
1660 .input = { {
1661 .type = EM28XX_VMUX_TELEVISION,
1662 .vmux = SAA7115_COMPOSITE2,
1663 .amux = EM28XX_AMUX_VIDEO,
1664 }, {
1665 .type = EM28XX_VMUX_COMPOSITE,
1666 .vmux = SAA7115_COMPOSITE0,
1667 .amux = EM28XX_AMUX_LINE_IN,
1668 }, {
1669 .type = EM28XX_VMUX_SVIDEO,
1670 .vmux = SAA7115_SVIDEO3,
1671 .amux = EM28XX_AMUX_LINE_IN,
1672 } },
1673 },
1674 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1675 .name = "Pixelview PlayTV Box 4 USB 2.0",
1676 .tda9887_conf = TDA9887_PRESENT,
1677 .tuner_type = TUNER_YMEC_TVF_5533MF,
1678 .decoder = EM28XX_SAA711X,
1679 .input = { {
1680 .type = EM28XX_VMUX_TELEVISION,
1681 .vmux = SAA7115_COMPOSITE2,
1682 .amux = EM28XX_AMUX_VIDEO,
1683 .aout = EM28XX_AOUT_MONO | /* I2S */
1684 EM28XX_AOUT_MASTER, /* Line out pin */
1685 }, {
1686 .type = EM28XX_VMUX_COMPOSITE,
1687 .vmux = SAA7115_COMPOSITE0,
1688 .amux = EM28XX_AMUX_LINE_IN,
1689 }, {
1690 .type = EM28XX_VMUX_SVIDEO,
1691 .vmux = SAA7115_SVIDEO3,
1692 .amux = EM28XX_AMUX_LINE_IN,
1693 } },
1694 },
1695 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1696 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1697 .buttons = std_snapshot_button,
1698 .tda9887_conf = TDA9887_PRESENT,
1699 .tuner_type = TUNER_YMEC_TVF_5533MF,
1700 .tuner_addr = 0x60,
1701 .decoder = EM28XX_SAA711X,
1702 .input = { {
1703 .type = EM28XX_VMUX_TELEVISION,
1704 .vmux = SAA7115_COMPOSITE2,
1705 .amux = EM28XX_AMUX_VIDEO,
1706 .aout = EM28XX_AOUT_MONO | /* I2S */
1707 EM28XX_AOUT_MASTER, /* Line out pin */
1708 }, {
1709 .type = EM28XX_VMUX_COMPOSITE,
1710 .vmux = SAA7115_COMPOSITE0,
1711 .amux = EM28XX_AMUX_LINE_IN,
1712 }, {
1713 .type = EM28XX_VMUX_SVIDEO,
1714 .vmux = SAA7115_SVIDEO3,
1715 .amux = EM28XX_AMUX_LINE_IN,
1716 } },
1717 },
1718 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1719 .name = "EM2860/SAA711X Reference Design",
1720 .buttons = std_snapshot_button,
1721 .tuner_type = TUNER_ABSENT,
1722 .decoder = EM28XX_SAA711X,
1723 .input = { {
1724 .type = EM28XX_VMUX_SVIDEO,
1725 .vmux = SAA7115_SVIDEO3,
1726 }, {
1727 .type = EM28XX_VMUX_COMPOSITE,
1728 .vmux = SAA7115_COMPOSITE0,
1729 } },
1730 },
1731
1732 [EM2874_BOARD_LEADERSHIP_ISDBT] = {
1733 .def_i2c_bus = 1,
1734 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1735 EM28XX_I2C_FREQ_100_KHZ,
1736 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
1737 .name = "EM2874 Leadership ISDBT",
1738 .tuner_type = TUNER_ABSENT,
1739 .tuner_gpio = leadership_reset,
1740 .dvb_gpio = leadership_digital,
1741 .has_dvb = 1,
1742 },
1743
1744 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1745 .name = "MSI DigiVox A/D",
1746 .valid = EM28XX_BOARD_NOT_VALIDATED,
1747 .tuner_type = TUNER_XC2028,
1748 .tuner_gpio = default_tuner_gpio,
1749 .decoder = EM28XX_TVP5150,
1750 .input = { {
1751 .type = EM28XX_VMUX_TELEVISION,
1752 .vmux = TVP5150_COMPOSITE0,
1753 .amux = EM28XX_AMUX_VIDEO,
1754 .gpio = em2880_msi_digivox_ad_analog,
1755 }, {
1756 .type = EM28XX_VMUX_COMPOSITE,
1757 .vmux = TVP5150_COMPOSITE1,
1758 .amux = EM28XX_AMUX_LINE_IN,
1759 .gpio = em2880_msi_digivox_ad_analog,
1760 }, {
1761 .type = EM28XX_VMUX_SVIDEO,
1762 .vmux = TVP5150_SVIDEO,
1763 .amux = EM28XX_AMUX_LINE_IN,
1764 .gpio = em2880_msi_digivox_ad_analog,
1765 } },
1766 },
1767 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1768 .name = "MSI DigiVox A/D II",
1769 .valid = EM28XX_BOARD_NOT_VALIDATED,
1770 .tuner_type = TUNER_XC2028,
1771 .tuner_gpio = default_tuner_gpio,
1772 .decoder = EM28XX_TVP5150,
1773 .input = { {
1774 .type = EM28XX_VMUX_TELEVISION,
1775 .vmux = TVP5150_COMPOSITE0,
1776 .amux = EM28XX_AMUX_VIDEO,
1777 .gpio = em2880_msi_digivox_ad_analog,
1778 }, {
1779 .type = EM28XX_VMUX_COMPOSITE,
1780 .vmux = TVP5150_COMPOSITE1,
1781 .amux = EM28XX_AMUX_LINE_IN,
1782 .gpio = em2880_msi_digivox_ad_analog,
1783 }, {
1784 .type = EM28XX_VMUX_SVIDEO,
1785 .vmux = TVP5150_SVIDEO,
1786 .amux = EM28XX_AMUX_LINE_IN,
1787 .gpio = em2880_msi_digivox_ad_analog,
1788 } },
1789 },
1790 [EM2880_BOARD_KWORLD_DVB_305U] = {
1791 .name = "KWorld DVB-T 305U",
1792 .tuner_type = TUNER_XC2028,
1793 .tuner_gpio = default_tuner_gpio,
1794 .decoder = EM28XX_TVP5150,
1795 .input = { {
1796 .type = EM28XX_VMUX_TELEVISION,
1797 .vmux = TVP5150_COMPOSITE0,
1798 .amux = EM28XX_AMUX_VIDEO,
1799 }, {
1800 .type = EM28XX_VMUX_COMPOSITE,
1801 .vmux = TVP5150_COMPOSITE1,
1802 .amux = EM28XX_AMUX_LINE_IN,
1803 }, {
1804 .type = EM28XX_VMUX_SVIDEO,
1805 .vmux = TVP5150_SVIDEO,
1806 .amux = EM28XX_AMUX_LINE_IN,
1807 } },
1808 },
1809 [EM2880_BOARD_KWORLD_DVB_310U] = {
1810 .name = "KWorld DVB-T 310U",
1811 .tuner_type = TUNER_XC2028,
1812 .tuner_gpio = default_tuner_gpio,
1813 .has_dvb = 1,
1814 .dvb_gpio = default_digital,
1815 .mts_firmware = 1,
1816 .decoder = EM28XX_TVP5150,
1817 .input = { {
1818 .type = EM28XX_VMUX_TELEVISION,
1819 .vmux = TVP5150_COMPOSITE0,
1820 .amux = EM28XX_AMUX_VIDEO,
1821 .gpio = default_analog,
1822 }, {
1823 .type = EM28XX_VMUX_COMPOSITE,
1824 .vmux = TVP5150_COMPOSITE1,
1825 .amux = EM28XX_AMUX_LINE_IN,
1826 .gpio = default_analog,
1827 }, { /* S-video has not been tested yet */
1828 .type = EM28XX_VMUX_SVIDEO,
1829 .vmux = TVP5150_SVIDEO,
1830 .amux = EM28XX_AMUX_LINE_IN,
1831 .gpio = default_analog,
1832 } },
1833 },
1834 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1835 .name = "KWorld ATSC 315U HDTV TV Box",
1836 .valid = EM28XX_BOARD_NOT_VALIDATED,
1837 .tuner_type = TUNER_THOMSON_DTT761X,
1838 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1839 .tda9887_conf = TDA9887_PRESENT,
1840 .decoder = EM28XX_SAA711X,
1841 .has_dvb = 1,
1842 .dvb_gpio = em2882_kworld_315u_digital,
1843 .ir_codes = RC_MAP_KWORLD_315U,
1844 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1845 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1846 #if 0
1847 /* FIXME: Analog mode - still not ready */
1848 .input = { {
1849 .type = EM28XX_VMUX_TELEVISION,
1850 .vmux = SAA7115_COMPOSITE2,
1851 .amux = EM28XX_AMUX_VIDEO,
1852 .gpio = em2882_kworld_315u_analog,
1853 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1854 }, {
1855 .type = EM28XX_VMUX_COMPOSITE,
1856 .vmux = SAA7115_COMPOSITE0,
1857 .amux = EM28XX_AMUX_LINE_IN,
1858 .gpio = em2882_kworld_315u_analog1,
1859 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1860 }, {
1861 .type = EM28XX_VMUX_SVIDEO,
1862 .vmux = SAA7115_SVIDEO3,
1863 .amux = EM28XX_AMUX_LINE_IN,
1864 .gpio = em2882_kworld_315u_analog1,
1865 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1866 } },
1867 #endif
1868 },
1869 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1870 .name = "Empire dual TV",
1871 .tuner_type = TUNER_XC2028,
1872 .tuner_gpio = default_tuner_gpio,
1873 .has_dvb = 1,
1874 .dvb_gpio = default_digital,
1875 .mts_firmware = 1,
1876 .decoder = EM28XX_TVP5150,
1877 .input = { {
1878 .type = EM28XX_VMUX_TELEVISION,
1879 .vmux = TVP5150_COMPOSITE0,
1880 .amux = EM28XX_AMUX_VIDEO,
1881 .gpio = default_analog,
1882 }, {
1883 .type = EM28XX_VMUX_COMPOSITE,
1884 .vmux = TVP5150_COMPOSITE1,
1885 .amux = EM28XX_AMUX_LINE_IN,
1886 .gpio = default_analog,
1887 }, {
1888 .type = EM28XX_VMUX_SVIDEO,
1889 .vmux = TVP5150_SVIDEO,
1890 .amux = EM28XX_AMUX_LINE_IN,
1891 .gpio = default_analog,
1892 } },
1893 },
1894 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1895 .name = "DNT DA2 Hybrid",
1896 .valid = EM28XX_BOARD_NOT_VALIDATED,
1897 .tuner_type = TUNER_XC2028,
1898 .tuner_gpio = default_tuner_gpio,
1899 .decoder = EM28XX_TVP5150,
1900 .input = { {
1901 .type = EM28XX_VMUX_TELEVISION,
1902 .vmux = TVP5150_COMPOSITE0,
1903 .amux = EM28XX_AMUX_VIDEO,
1904 .gpio = default_analog,
1905 }, {
1906 .type = EM28XX_VMUX_COMPOSITE,
1907 .vmux = TVP5150_COMPOSITE1,
1908 .amux = EM28XX_AMUX_LINE_IN,
1909 .gpio = default_analog,
1910 }, {
1911 .type = EM28XX_VMUX_SVIDEO,
1912 .vmux = TVP5150_SVIDEO,
1913 .amux = EM28XX_AMUX_LINE_IN,
1914 .gpio = default_analog,
1915 } },
1916 },
1917 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1918 .name = "Pinnacle Hybrid Pro",
1919 .tuner_type = TUNER_XC2028,
1920 .tuner_gpio = default_tuner_gpio,
1921 .decoder = EM28XX_TVP5150,
1922 .has_dvb = 1,
1923 .dvb_gpio = pinnacle_hybrid_pro_digital,
1924 .input = { {
1925 .type = EM28XX_VMUX_TELEVISION,
1926 .vmux = TVP5150_COMPOSITE0,
1927 .amux = EM28XX_AMUX_VIDEO,
1928 .gpio = pinnacle_hybrid_pro_analog,
1929 }, {
1930 .type = EM28XX_VMUX_COMPOSITE,
1931 .vmux = TVP5150_COMPOSITE1,
1932 .amux = EM28XX_AMUX_LINE_IN,
1933 .gpio = pinnacle_hybrid_pro_analog,
1934 }, {
1935 .type = EM28XX_VMUX_SVIDEO,
1936 .vmux = TVP5150_SVIDEO,
1937 .amux = EM28XX_AMUX_LINE_IN,
1938 .gpio = pinnacle_hybrid_pro_analog,
1939 } },
1940 },
1941 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
1942 .name = "Pinnacle Hybrid Pro (330e)",
1943 .tuner_type = TUNER_XC2028,
1944 .tuner_gpio = default_tuner_gpio,
1945 .mts_firmware = 1,
1946 .has_dvb = 1,
1947 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1948 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1949 .decoder = EM28XX_TVP5150,
1950 .input = { {
1951 .type = EM28XX_VMUX_TELEVISION,
1952 .vmux = TVP5150_COMPOSITE0,
1953 .amux = EM28XX_AMUX_VIDEO,
1954 .gpio = hauppauge_wintv_hvr_900_analog,
1955 }, {
1956 .type = EM28XX_VMUX_COMPOSITE,
1957 .vmux = TVP5150_COMPOSITE1,
1958 .amux = EM28XX_AMUX_LINE_IN,
1959 .gpio = hauppauge_wintv_hvr_900_analog,
1960 }, {
1961 .type = EM28XX_VMUX_SVIDEO,
1962 .vmux = TVP5150_SVIDEO,
1963 .amux = EM28XX_AMUX_LINE_IN,
1964 .gpio = hauppauge_wintv_hvr_900_analog,
1965 } },
1966 },
1967 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1968 .name = "Kworld VS-DVB-T 323UR",
1969 .tuner_type = TUNER_XC2028,
1970 .tuner_gpio = default_tuner_gpio,
1971 .decoder = EM28XX_TVP5150,
1972 .mts_firmware = 1,
1973 .has_dvb = 1,
1974 .dvb_gpio = kworld_330u_digital,
1975 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1976 .ir_codes = RC_MAP_KWORLD_315U,
1977 .input = { {
1978 .type = EM28XX_VMUX_TELEVISION,
1979 .vmux = TVP5150_COMPOSITE0,
1980 .amux = EM28XX_AMUX_VIDEO,
1981 }, {
1982 .type = EM28XX_VMUX_COMPOSITE,
1983 .vmux = TVP5150_COMPOSITE1,
1984 .amux = EM28XX_AMUX_LINE_IN,
1985 }, {
1986 .type = EM28XX_VMUX_SVIDEO,
1987 .vmux = TVP5150_SVIDEO,
1988 .amux = EM28XX_AMUX_LINE_IN,
1989 } },
1990 },
1991 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1992 .name = "Terratec Cinergy Hybrid T USB XS (em2882)",
1993 .tuner_type = TUNER_XC2028,
1994 .tuner_gpio = default_tuner_gpio,
1995 .mts_firmware = 1,
1996 .decoder = EM28XX_TVP5150,
1997 .has_dvb = 1,
1998 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1999 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
2000 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2001 .input = { {
2002 .type = EM28XX_VMUX_TELEVISION,
2003 .vmux = TVP5150_COMPOSITE0,
2004 .amux = EM28XX_AMUX_VIDEO,
2005 .gpio = hauppauge_wintv_hvr_900_analog,
2006 }, {
2007 .type = EM28XX_VMUX_COMPOSITE,
2008 .vmux = TVP5150_COMPOSITE1,
2009 .amux = EM28XX_AMUX_LINE_IN,
2010 .gpio = hauppauge_wintv_hvr_900_analog,
2011 }, {
2012 .type = EM28XX_VMUX_SVIDEO,
2013 .vmux = TVP5150_SVIDEO,
2014 .amux = EM28XX_AMUX_LINE_IN,
2015 .gpio = hauppauge_wintv_hvr_900_analog,
2016 } },
2017 },
2018 [EM2882_BOARD_DIKOM_DK300] = {
2019 .name = "Dikom DK300",
2020 .tuner_type = TUNER_XC2028,
2021 .tuner_gpio = default_tuner_gpio,
2022 .decoder = EM28XX_TVP5150,
2023 .mts_firmware = 1,
2024 .has_dvb = 1,
2025 .dvb_gpio = dikom_dk300_digital,
2026 .input = { {
2027 .type = EM28XX_VMUX_TELEVISION,
2028 .vmux = TVP5150_COMPOSITE0,
2029 .amux = EM28XX_AMUX_VIDEO,
2030 .gpio = default_analog,
2031 } },
2032 },
2033 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
2034 .name = "Kworld PlusTV HD Hybrid 330",
2035 .tuner_type = TUNER_XC2028,
2036 .tuner_gpio = default_tuner_gpio,
2037 .decoder = EM28XX_TVP5150,
2038 .mts_firmware = 1,
2039 .has_dvb = 1,
2040 .dvb_gpio = kworld_330u_digital,
2041 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2042 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2043 EM28XX_I2C_EEPROM_ON_BOARD |
2044 EM28XX_I2C_EEPROM_KEY_VALID,
2045 .input = { {
2046 .type = EM28XX_VMUX_TELEVISION,
2047 .vmux = TVP5150_COMPOSITE0,
2048 .amux = EM28XX_AMUX_VIDEO,
2049 .gpio = kworld_330u_analog,
2050 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
2051 }, {
2052 .type = EM28XX_VMUX_COMPOSITE,
2053 .vmux = TVP5150_COMPOSITE1,
2054 .amux = EM28XX_AMUX_LINE_IN,
2055 .gpio = kworld_330u_analog,
2056 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
2057 }, {
2058 .type = EM28XX_VMUX_SVIDEO,
2059 .vmux = TVP5150_SVIDEO,
2060 .amux = EM28XX_AMUX_LINE_IN,
2061 .gpio = kworld_330u_analog,
2062 } },
2063 },
2064 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
2065 .name = "Compro VideoMate ForYou/Stereo",
2066 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
2067 .tvaudio_addr = 0xb0,
2068 .tda9887_conf = TDA9887_PRESENT,
2069 .decoder = EM28XX_TVP5150,
2070 .adecoder = EM28XX_TVAUDIO,
2071 .mute_gpio = compro_mute_gpio,
2072 .input = { {
2073 .type = EM28XX_VMUX_TELEVISION,
2074 .vmux = TVP5150_COMPOSITE0,
2075 .amux = EM28XX_AMUX_VIDEO,
2076 .gpio = compro_unmute_tv_gpio,
2077 }, {
2078 .type = EM28XX_VMUX_SVIDEO,
2079 .vmux = TVP5150_SVIDEO,
2080 .amux = EM28XX_AMUX_LINE_IN,
2081 .gpio = compro_unmute_svid_gpio,
2082 } },
2083 },
2084 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
2085 .name = "Kaiomy TVnPC U2",
2086 .vchannels = 3,
2087 .tuner_type = TUNER_XC2028,
2088 .tuner_addr = 0x61,
2089 .mts_firmware = 1,
2090 .decoder = EM28XX_TVP5150,
2091 .tuner_gpio = default_tuner_gpio,
2092 .ir_codes = RC_MAP_KAIOMY,
2093 .input = { {
2094 .type = EM28XX_VMUX_TELEVISION,
2095 .vmux = TVP5150_COMPOSITE0,
2096 .amux = EM28XX_AMUX_VIDEO,
2097
2098 }, {
2099 .type = EM28XX_VMUX_COMPOSITE,
2100 .vmux = TVP5150_COMPOSITE1,
2101 .amux = EM28XX_AMUX_LINE_IN,
2102 }, {
2103 .type = EM28XX_VMUX_SVIDEO,
2104 .vmux = TVP5150_SVIDEO,
2105 .amux = EM28XX_AMUX_LINE_IN,
2106 } },
2107 .radio = {
2108 .type = EM28XX_RADIO,
2109 .amux = EM28XX_AMUX_LINE_IN,
2110 }
2111 },
2112 [EM2860_BOARD_EASYCAP] = {
2113 .name = "Easy Cap Capture DC-60",
2114 .vchannels = 2,
2115 .tuner_type = TUNER_ABSENT,
2116 .decoder = EM28XX_SAA711X,
2117 .input = { {
2118 .type = EM28XX_VMUX_COMPOSITE,
2119 .vmux = SAA7115_COMPOSITE0,
2120 .amux = EM28XX_AMUX_LINE_IN,
2121 }, {
2122 .type = EM28XX_VMUX_SVIDEO,
2123 .vmux = SAA7115_SVIDEO3,
2124 .amux = EM28XX_AMUX_LINE_IN,
2125 } },
2126 },
2127 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
2128 .name = "IO-DATA GV-MVP/SZ",
2129 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
2130 .tuner_gpio = default_tuner_gpio,
2131 .tda9887_conf = TDA9887_PRESENT,
2132 .decoder = EM28XX_TVP5150,
2133 .input = { {
2134 .type = EM28XX_VMUX_TELEVISION,
2135 .vmux = TVP5150_COMPOSITE0,
2136 .amux = EM28XX_AMUX_VIDEO,
2137 }, { /* Composite has not been tested yet */
2138 .type = EM28XX_VMUX_COMPOSITE,
2139 .vmux = TVP5150_COMPOSITE1,
2140 .amux = EM28XX_AMUX_VIDEO,
2141 }, { /* S-video has not been tested yet */
2142 .type = EM28XX_VMUX_SVIDEO,
2143 .vmux = TVP5150_SVIDEO,
2144 .amux = EM28XX_AMUX_VIDEO,
2145 } },
2146 },
2147 [EM2860_BOARD_TERRATEC_GRABBY] = {
2148 .name = "Terratec Grabby",
2149 .vchannels = 2,
2150 .tuner_type = TUNER_ABSENT,
2151 .decoder = EM28XX_SAA711X,
2152 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2153 .input = { {
2154 .type = EM28XX_VMUX_COMPOSITE,
2155 .vmux = SAA7115_COMPOSITE0,
2156 .amux = EM28XX_AMUX_LINE_IN,
2157 }, {
2158 .type = EM28XX_VMUX_SVIDEO,
2159 .vmux = SAA7115_SVIDEO3,
2160 .amux = EM28XX_AMUX_LINE_IN,
2161 } },
2162 .buttons = std_snapshot_button,
2163 .leds = terratec_grabby_leds,
2164 },
2165 [EM2860_BOARD_TERRATEC_AV350] = {
2166 .name = "Terratec AV350",
2167 .vchannels = 2,
2168 .tuner_type = TUNER_ABSENT,
2169 .decoder = EM28XX_TVP5150,
2170 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2171 .mute_gpio = terratec_av350_mute_gpio,
2172 .input = { {
2173 .type = EM28XX_VMUX_COMPOSITE,
2174 .vmux = TVP5150_COMPOSITE1,
2175 .amux = EM28XX_AMUX_LINE_IN,
2176 .gpio = terratec_av350_unmute_gpio,
2177
2178 }, {
2179 .type = EM28XX_VMUX_SVIDEO,
2180 .vmux = TVP5150_SVIDEO,
2181 .amux = EM28XX_AMUX_LINE_IN,
2182 .gpio = terratec_av350_unmute_gpio,
2183 } },
2184 },
2185
2186 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
2187 .name = "Elgato Video Capture",
2188 .decoder = EM28XX_SAA711X,
2189 .tuner_type = TUNER_ABSENT, /* Capture only device */
2190 .input = { {
2191 .type = EM28XX_VMUX_COMPOSITE,
2192 .vmux = SAA7115_COMPOSITE0,
2193 .amux = EM28XX_AMUX_LINE_IN,
2194 }, {
2195 .type = EM28XX_VMUX_SVIDEO,
2196 .vmux = SAA7115_SVIDEO3,
2197 .amux = EM28XX_AMUX_LINE_IN,
2198 } },
2199 },
2200
2201 [EM2882_BOARD_EVGA_INDTUBE] = {
2202 .name = "Evga inDtube",
2203 .tuner_type = TUNER_XC2028,
2204 .tuner_gpio = default_tuner_gpio,
2205 .decoder = EM28XX_TVP5150,
2206 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
2207 .mts_firmware = 1,
2208 .has_dvb = 1,
2209 .dvb_gpio = evga_indtube_digital,
2210 .ir_codes = RC_MAP_EVGA_INDTUBE,
2211 .input = { {
2212 .type = EM28XX_VMUX_TELEVISION,
2213 .vmux = TVP5150_COMPOSITE0,
2214 .amux = EM28XX_AMUX_VIDEO,
2215 .gpio = evga_indtube_analog,
2216 }, {
2217 .type = EM28XX_VMUX_COMPOSITE,
2218 .vmux = TVP5150_COMPOSITE1,
2219 .amux = EM28XX_AMUX_LINE_IN,
2220 .gpio = evga_indtube_analog,
2221 }, {
2222 .type = EM28XX_VMUX_SVIDEO,
2223 .vmux = TVP5150_SVIDEO,
2224 .amux = EM28XX_AMUX_LINE_IN,
2225 .gpio = evga_indtube_analog,
2226 } },
2227 },
2228 /*
2229 * eb1a:2868 Empia EM2870 + Philips CU1216L NIM
2230 * (Philips TDA10023 + Infineon TUA6034)
2231 */
2232 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
2233 .name = "Reddo DVB-C USB TV Box",
2234 .tuner_type = TUNER_ABSENT,
2235 .tuner_gpio = reddo_dvb_c_usb_box,
2236 .has_dvb = 1,
2237 },
2238 /*
2239 * 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
2240 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
2241 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2
2242 */
2243 [EM2870_BOARD_KWORLD_A340] = {
2244 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
2245 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
2246 .has_dvb = 1,
2247 .dvb_gpio = kworld_a340_digital,
2248 .tuner_gpio = default_tuner_gpio,
2249 },
2250 /*
2251 * 2013:024f PCTV nanoStick T2 290e.
2252 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2
2253 */
2254 [EM28174_BOARD_PCTV_290E] = {
2255 .name = "PCTV nanoStick T2 290e",
2256 .def_i2c_bus = 1,
2257 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2258 EM28XX_I2C_FREQ_100_KHZ,
2259 .tuner_type = TUNER_ABSENT,
2260 .tuner_gpio = pctv_290e,
2261 .has_dvb = 1,
2262 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2263 },
2264 /*
2265 * 2013:024f PCTV DVB-S2 Stick 460e
2266 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293
2267 */
2268 [EM28174_BOARD_PCTV_460E] = {
2269 .def_i2c_bus = 1,
2270 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2271 EM28XX_I2C_FREQ_400_KHZ,
2272 .name = "PCTV DVB-S2 Stick (460e)",
2273 .tuner_type = TUNER_ABSENT,
2274 .tuner_gpio = pctv_460e,
2275 .has_dvb = 1,
2276 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2277 },
2278 /*
2279 * eb1a:5006 Honestech VIDBOX NW03
2280 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
2281 */
2282 [EM2860_BOARD_HT_VIDBOX_NW03] = {
2283 .name = "Honestech Vidbox NW03",
2284 .tuner_type = TUNER_ABSENT,
2285 .decoder = EM28XX_SAA711X,
2286 .input = { {
2287 .type = EM28XX_VMUX_COMPOSITE,
2288 .vmux = SAA7115_COMPOSITE0,
2289 .amux = EM28XX_AMUX_LINE_IN,
2290 }, {
2291 .type = EM28XX_VMUX_SVIDEO,
2292 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs check */
2293 .amux = EM28XX_AMUX_LINE_IN,
2294 } },
2295 },
2296 /*
2297 * 1b80:e425 MaxMedia UB425-TC
2298 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
2299 */
2300 [EM2874_BOARD_MAXMEDIA_UB425_TC] = {
2301 .name = "MaxMedia UB425-TC",
2302 .tuner_type = TUNER_ABSENT,
2303 .tuner_gpio = maxmedia_ub425_tc,
2304 .has_dvb = 1,
2305 .ir_codes = RC_MAP_REDDO,
2306 .def_i2c_bus = 1,
2307 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2308 EM28XX_I2C_FREQ_400_KHZ,
2309 },
2310 /*
2311 * 2304:0242 PCTV QuatroStick (510e)
2312 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2
2313 */
2314 [EM2884_BOARD_PCTV_510E] = {
2315 .name = "PCTV QuatroStick (510e)",
2316 .tuner_type = TUNER_ABSENT,
2317 .tuner_gpio = pctv_510e,
2318 .has_dvb = 1,
2319 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2320 .def_i2c_bus = 1,
2321 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2322 EM28XX_I2C_FREQ_400_KHZ,
2323 },
2324 /*
2325 * 2013:0251 PCTV QuatroStick nano (520e)
2326 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2
2327 */
2328 [EM2884_BOARD_PCTV_520E] = {
2329 .name = "PCTV QuatroStick nano (520e)",
2330 .tuner_type = TUNER_ABSENT,
2331 .tuner_gpio = pctv_520e,
2332 .has_dvb = 1,
2333 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2334 .def_i2c_bus = 1,
2335 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2336 EM28XX_I2C_FREQ_400_KHZ,
2337 },
2338 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = {
2339 .name = "Terratec Cinergy HTC USB XS",
2340 .has_dvb = 1,
2341 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
2342 .tuner_type = TUNER_ABSENT,
2343 .def_i2c_bus = 1,
2344 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2345 EM28XX_I2C_FREQ_400_KHZ,
2346 },
2347 /*
2348 * 1b80:e1cc Delock 61959
2349 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
2350 * mostly the same as MaxMedia UB-425-TC but different remote
2351 */
2352 [EM2874_BOARD_DELOCK_61959] = {
2353 .name = "Delock 61959",
2354 .tuner_type = TUNER_ABSENT,
2355 .tuner_gpio = maxmedia_ub425_tc,
2356 .has_dvb = 1,
2357 .ir_codes = RC_MAP_DELOCK_61959,
2358 .def_i2c_bus = 1,
2359 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2360 EM28XX_I2C_FREQ_400_KHZ,
2361 },
2362 /*
2363 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2
2364 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
2365 */
2366 [EM2874_BOARD_KWORLD_UB435Q_V2] = {
2367 .name = "KWorld USB ATSC TV Stick UB435-Q V2",
2368 .tuner_type = TUNER_ABSENT,
2369 .has_dvb = 1,
2370 .dvb_gpio = kworld_a340_digital,
2371 .tuner_gpio = default_tuner_gpio,
2372 .def_i2c_bus = 1,
2373 },
2374 /*
2375 * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3
2376 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
2377 */
2378 [EM2874_BOARD_KWORLD_UB435Q_V3] = {
2379 .name = "KWorld USB ATSC TV Stick UB435-Q V3",
2380 .tuner_type = TUNER_ABSENT,
2381 .has_dvb = 1,
2382 .tuner_gpio = kworld_ub435q_v3_digital,
2383 .def_i2c_bus = 1,
2384 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2385 EM28XX_I2C_FREQ_100_KHZ,
2386 .leds = kworld_ub435q_v3_leds,
2387 },
2388 [EM2874_BOARD_PCTV_HD_MINI_80E] = {
2389 .name = "Pinnacle PCTV HD Mini",
2390 .tuner_type = TUNER_ABSENT,
2391 .has_dvb = 1,
2392 .dvb_gpio = em2874_pctv_80e_digital,
2393 .decoder = EM28XX_NODECODER,
2394 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2395 .leds = pctv_80e_leds,
2396 },
2397 /*
2398 * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
2399 * Empia EM2765 + OmniVision OV2640
2400 */
2401 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = {
2402 .name = "SpeedLink Vicious And Devine Laplace webcam",
2403 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ,
2404 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2405 EM28XX_I2C_FREQ_100_KHZ,
2406 .def_i2c_bus = 1,
2407 .tuner_type = TUNER_ABSENT,
2408 .is_webcam = 1,
2409 .input = { {
2410 .type = EM28XX_VMUX_COMPOSITE,
2411 .amux = EM28XX_AMUX_VIDEO,
2412 .gpio = speedlink_vad_laplace_reg_seq,
2413 } },
2414 .buttons = speedlink_vad_laplace_buttons,
2415 .leds = speedlink_vad_laplace_leds,
2416 },
2417 /*
2418 * 2013:0258 PCTV DVB-S2 Stick (461e)
2419 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293
2420 */
2421 [EM28178_BOARD_PCTV_461E] = {
2422 .def_i2c_bus = 1,
2423 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2424 EM28XX_I2C_FREQ_400_KHZ,
2425 .name = "PCTV DVB-S2 Stick (461e)",
2426 .tuner_type = TUNER_ABSENT,
2427 .tuner_gpio = pctv_461e,
2428 .has_dvb = 1,
2429 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2430 },
2431 /*
2432 * 2013:0259 PCTV DVB-S2 Stick (461e_v2)
2433 * Empia EM28178, Montage M88DS3103b, Montage M88TS2022, Allegro A8293
2434 */
2435 [EM28178_BOARD_PCTV_461E_V2] = {
2436 .def_i2c_bus = 1,
2437 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2438 EM28XX_I2C_FREQ_400_KHZ,
2439 .name = "PCTV DVB-S2 Stick (461e v2)",
2440 .tuner_type = TUNER_ABSENT,
2441 .tuner_gpio = pctv_461e,
2442 .has_dvb = 1,
2443 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2444 },
2445 /*
2446 * 2013:025f PCTV tripleStick (292e).
2447 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157
2448 */
2449 [EM28178_BOARD_PCTV_292E] = {
2450 .name = "PCTV tripleStick (292e)",
2451 .def_i2c_bus = 1,
2452 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2453 EM28XX_I2C_FREQ_400_KHZ,
2454 .tuner_type = TUNER_ABSENT,
2455 .tuner_gpio = pctv_292e,
2456 .has_dvb = 1,
2457 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2458 },
2459 [EM2861_BOARD_LEADTEK_VC100] = {
2460 .name = "Leadtek VC100",
2461 .tuner_type = TUNER_ABSENT, /* Capture only device */
2462 .decoder = EM28XX_TVP5150,
2463 .input = { {
2464 .type = EM28XX_VMUX_COMPOSITE,
2465 .vmux = TVP5150_COMPOSITE1,
2466 .amux = EM28XX_AMUX_LINE_IN,
2467 }, {
2468 .type = EM28XX_VMUX_SVIDEO,
2469 .vmux = TVP5150_SVIDEO,
2470 .amux = EM28XX_AMUX_LINE_IN,
2471 } },
2472 },
2473 /*
2474 * eb1a:8179 Terratec Cinergy T2 Stick HD.
2475 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146
2476 */
2477 [EM28178_BOARD_TERRATEC_T2_STICK_HD] = {
2478 .name = "Terratec Cinergy T2 Stick HD",
2479 .def_i2c_bus = 1,
2480 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2481 EM28XX_I2C_FREQ_400_KHZ,
2482 .tuner_type = TUNER_ABSENT,
2483 .tuner_gpio = terratec_t2_stick_hd,
2484 .has_dvb = 1,
2485 .ir_codes = RC_MAP_TERRATEC_SLIM_2,
2486 },
2487
2488 /*
2489 * 3275:0085 PLEX PX-BCUD.
2490 * Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042
2491 */
2492 [EM28178_BOARD_PLEX_PX_BCUD] = {
2493 .name = "PLEX PX-BCUD",
2494 .xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ,
2495 .def_i2c_bus = 1,
2496 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
2497 .tuner_type = TUNER_ABSENT,
2498 .tuner_gpio = plex_px_bcud,
2499 .has_dvb = 1,
2500 },
2501 /*
2502 * 2040:0265 Hauppauge WinTV-dualHD (DVB version) Isoc.
2503 * 2040:8265 Hauppauge WinTV-dualHD (DVB version) Bulk.
2504 * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157
2505 */
2506 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = {
2507 .name = "Hauppauge WinTV-dualHD DVB",
2508 .def_i2c_bus = 1,
2509 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2510 EM28XX_I2C_FREQ_400_KHZ,
2511 .tuner_type = TUNER_SI2157,
2512 .tuner_gpio = hauppauge_dualhd_dvb,
2513 .has_dvb = 1,
2514 .has_dual_ts = 1,
2515 .ir_codes = RC_MAP_HAUPPAUGE,
2516 .leds = hauppauge_dualhd_leds,
2517 .input = { {
2518 .type = EM28XX_VMUX_COMPOSITE,
2519 .vmux = TVP5150_COMPOSITE1,
2520 .amux = EM28XX_AMUX_LINE_IN,
2521 } },
2522 },
2523 /*
2524 * 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Isoc.
2525 * 2040:826d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Bulk.
2526 * Empia EM28274, 2x LG LGDT3306A, 2x Silicon Labs Si2157
2527 */
2528 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595] = {
2529 .name = "Hauppauge WinTV-dualHD 01595 ATSC/QAM",
2530 .def_i2c_bus = 1,
2531 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2532 EM28XX_I2C_FREQ_400_KHZ,
2533 .tuner_type = TUNER_ABSENT,
2534 .tuner_gpio = hauppauge_dualhd_dvb,
2535 .has_dvb = 1,
2536 .has_dual_ts = 1,
2537 .ir_codes = RC_MAP_HAUPPAUGE,
2538 .leds = hauppauge_dualhd_leds,
2539 },
2540 /*
2541 * 1b80:e349 Magix USB Videowandler-2
2542 * (same chips as Honestech VIDBOX NW03)
2543 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
2544 */
2545 [EM2861_BOARD_MAGIX_VIDEOWANDLER2] = {
2546 .name = "Magix USB Videowandler-2",
2547 .tuner_type = TUNER_ABSENT,
2548 .decoder = EM28XX_SAA711X,
2549 .input = { {
2550 .type = EM28XX_VMUX_COMPOSITE,
2551 .vmux = SAA7115_COMPOSITE0,
2552 .amux = EM28XX_AMUX_LINE_IN,
2553 }, {
2554 .type = EM28XX_VMUX_SVIDEO,
2555 .amux = EM28XX_AMUX_LINE_IN,
2556 } },
2557 },
2558 /*
2559 * 1f4d:1abe MyGica iGrabber
2560 * (same as several other EM2860 devices)
2561 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
2562 */
2563 [EM2860_BOARD_MYGICA_IGRABBER] = {
2564 .name = "MyGica iGrabber",
2565 .vchannels = 2,
2566 .tuner_type = TUNER_ABSENT,
2567 .decoder = EM28XX_SAA711X,
2568 .input = { {
2569 .type = EM28XX_VMUX_COMPOSITE,
2570 .vmux = SAA7115_COMPOSITE0,
2571 .amux = EM28XX_AMUX_LINE_IN,
2572 }, {
2573 .type = EM28XX_VMUX_SVIDEO,
2574 .vmux = SAA7115_SVIDEO3,
2575 .amux = EM28XX_AMUX_LINE_IN,
2576 } },
2577 },
2578 /* 2040:826d Hauppauge USB QuadHD
2579 * Empia 28274, Max Linear 692 ATSC combo demod/tuner
2580 */
2581 [EM2874_BOARD_HAUPPAUGE_USB_QUADHD] = {
2582 .name = "Hauppauge USB QuadHD ATSC",
2583 .def_i2c_bus = 1,
2584 .has_dual_ts = 1,
2585 .has_dvb = 1,
2586 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
2587 .tuner_type = TUNER_ABSENT,
2588 .tuner_gpio = hauppauge_usb_quadhd_atsc_reg_seq,
2589 .leds = hauppauge_usb_quadhd_leds,
2590 },
2591 };
2592 EXPORT_SYMBOL_GPL(em28xx_boards);
2593
2594 static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
2595
2596 /* table of devices that work with this driver */
2597 struct usb_device_id em28xx_id_table[] = {
2598 { USB_DEVICE(0xeb1a, 0x2750),
2599 .driver_info = EM2750_BOARD_UNKNOWN },
2600 { USB_DEVICE(0xeb1a, 0x2751),
2601 .driver_info = EM2750_BOARD_UNKNOWN },
2602 { USB_DEVICE(0xeb1a, 0x2800),
2603 .driver_info = EM2800_BOARD_UNKNOWN },
2604 { USB_DEVICE(0xeb1a, 0x2710),
2605 .driver_info = EM2820_BOARD_UNKNOWN },
2606 { USB_DEVICE(0xeb1a, 0x2820),
2607 .driver_info = EM2820_BOARD_UNKNOWN },
2608 { USB_DEVICE(0xeb1a, 0x2821),
2609 .driver_info = EM2820_BOARD_UNKNOWN },
2610 { USB_DEVICE(0xeb1a, 0x2860),
2611 .driver_info = EM2820_BOARD_UNKNOWN },
2612 { USB_DEVICE(0xeb1a, 0x2861),
2613 .driver_info = EM2820_BOARD_UNKNOWN },
2614 { USB_DEVICE(0xeb1a, 0x2862),
2615 .driver_info = EM2820_BOARD_UNKNOWN },
2616 { USB_DEVICE(0xeb1a, 0x2863),
2617 .driver_info = EM2820_BOARD_UNKNOWN },
2618 { USB_DEVICE(0xeb1a, 0x2870),
2619 .driver_info = EM2820_BOARD_UNKNOWN },
2620 { USB_DEVICE(0xeb1a, 0x2881),
2621 .driver_info = EM2820_BOARD_UNKNOWN },
2622 { USB_DEVICE(0xeb1a, 0x2883), /* used by :Zolid Hybrid Tv Stick */
2623 .driver_info = EM2820_BOARD_UNKNOWN },
2624 { USB_DEVICE(0xeb1a, 0x2868),
2625 .driver_info = EM2820_BOARD_UNKNOWN },
2626 { USB_DEVICE(0xeb1a, 0x2875),
2627 .driver_info = EM2820_BOARD_UNKNOWN },
2628 { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */
2629 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2630 { USB_DEVICE(0xeb1a, 0xe300),
2631 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
2632 { USB_DEVICE(0xeb1a, 0xe303),
2633 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
2634 { USB_DEVICE(0xeb1a, 0xe305),
2635 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
2636 { USB_DEVICE(0xeb1a, 0xe310),
2637 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
2638 { USB_DEVICE(0xeb1a, 0xa313),
2639 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
2640 { USB_DEVICE(0xeb1a, 0xa316),
2641 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
2642 { USB_DEVICE(0xeb1a, 0xe320),
2643 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
2644 { USB_DEVICE(0xeb1a, 0xe323),
2645 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
2646 { USB_DEVICE(0xeb1a, 0xe350),
2647 .driver_info = EM2870_BOARD_KWORLD_350U },
2648 { USB_DEVICE(0xeb1a, 0xe355),
2649 .driver_info = EM2870_BOARD_KWORLD_355U },
2650 { USB_DEVICE(0xeb1a, 0x2801),
2651 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
2652 { USB_DEVICE(0xeb1a, 0xe357),
2653 .driver_info = EM2870_BOARD_KWORLD_355U },
2654 { USB_DEVICE(0xeb1a, 0xe359),
2655 .driver_info = EM2870_BOARD_KWORLD_355U },
2656 { USB_DEVICE(0x1b80, 0xe302), /* Kaiser Baas Video to DVD maker */
2657 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2658 { USB_DEVICE(0x1b80, 0xe304), /* Kworld DVD Maker 2 */
2659 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2660 { USB_DEVICE(0x0ccd, 0x0036),
2661 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
2662 { USB_DEVICE(0x0ccd, 0x004c),
2663 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
2664 { USB_DEVICE(0x0ccd, 0x004f),
2665 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
2666 { USB_DEVICE(0x0ccd, 0x005e),
2667 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2668 { USB_DEVICE(0x0ccd, 0x0042),
2669 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2670 { USB_DEVICE(0x0ccd, 0x0043),
2671 .driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 },
2672 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */
2673 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
2674 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */
2675 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
2676 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */
2677 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2678 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */
2679 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2680 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */
2681 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2682 { USB_DEVICE(0x0ccd, 0x10b2), /* H6 */
2683 .driver_info = EM2884_BOARD_TERRATEC_H6 },
2684 { USB_DEVICE(0x0ccd, 0x0084),
2685 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
2686 { USB_DEVICE(0x0ccd, 0x0096),
2687 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2688 { USB_DEVICE(0x0ccd, 0x10AF),
2689 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2690 { USB_DEVICE(0x0ccd, 0x00b2),
2691 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
2692 { USB_DEVICE(0x0fd9, 0x0018),
2693 .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 },
2694 { USB_DEVICE(0x0fd9, 0x0033),
2695 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE },
2696 { USB_DEVICE(0x185b, 0x2870),
2697 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
2698 { USB_DEVICE(0x185b, 0x2041),
2699 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
2700 { USB_DEVICE(0x2040, 0x4200),
2701 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2702 { USB_DEVICE(0x2040, 0x4201),
2703 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2704 { USB_DEVICE(0x2040, 0x6500),
2705 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
2706 { USB_DEVICE(0x2040, 0x6502),
2707 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
2708 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
2709 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2710 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
2711 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2712 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
2713 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2714 { USB_DEVICE(0x2040, 0x651f),
2715 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
2716 { USB_DEVICE(0x2040, 0x0265),
2717 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
2718 { USB_DEVICE(0x2040, 0x8265),
2719 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
2720 { USB_DEVICE(0x2040, 0x026d),
2721 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 },
2722 { USB_DEVICE(0x2040, 0x826d),
2723 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 },
2724 { USB_DEVICE(0x2040, 0x846d),
2725 .driver_info = EM2874_BOARD_HAUPPAUGE_USB_QUADHD },
2726 { USB_DEVICE(0x0438, 0xb002),
2727 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
2728 { USB_DEVICE(0x2001, 0xf112),
2729 .driver_info = EM2820_BOARD_DLINK_USB_TV },
2730 { USB_DEVICE(0x2304, 0x0207),
2731 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2732 { USB_DEVICE(0x2304, 0x0208),
2733 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
2734 { USB_DEVICE(0x2304, 0x021a),
2735 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2736 { USB_DEVICE(0x2304, 0x0226),
2737 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
2738 { USB_DEVICE(0x2304, 0x0227),
2739 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
2740 { USB_DEVICE(0x2304, 0x023f),
2741 .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E },
2742 { USB_DEVICE(0x0413, 0x6023),
2743 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
2744 { USB_DEVICE(0x093b, 0xa003),
2745 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2746 { USB_DEVICE(0x093b, 0xa005),
2747 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
2748 { USB_DEVICE(0x04bb, 0x0515),
2749 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
2750 { USB_DEVICE(0xeb1a, 0x50a6),
2751 .driver_info = EM2860_BOARD_GADMEI_UTV330 },
2752 { USB_DEVICE(0x1b80, 0xa340),
2753 .driver_info = EM2870_BOARD_KWORLD_A340 },
2754 { USB_DEVICE(0x1b80, 0xe346),
2755 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 },
2756 { USB_DEVICE(0x1b80, 0xe34c),
2757 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 },
2758 { USB_DEVICE(0x2013, 0x024f),
2759 .driver_info = EM28174_BOARD_PCTV_290E },
2760 { USB_DEVICE(0x2013, 0x024c),
2761 .driver_info = EM28174_BOARD_PCTV_460E },
2762 { USB_DEVICE(0x2040, 0x1605),
2763 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
2764 { USB_DEVICE(0x1b80, 0xe755),
2765 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO },
2766 { USB_DEVICE(0xeb1a, 0x5006),
2767 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
2768 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
2769 .driver_info = EM2860_BOARD_EASYCAP },
2770 { USB_DEVICE(0x1b80, 0xe425),
2771 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
2772 { USB_DEVICE(0x1f4d, 0x1abe),
2773 .driver_info = EM2860_BOARD_MYGICA_IGRABBER },
2774 { USB_DEVICE(0x2304, 0x0242),
2775 .driver_info = EM2884_BOARD_PCTV_510E },
2776 { USB_DEVICE(0x2013, 0x0251),
2777 .driver_info = EM2884_BOARD_PCTV_520E },
2778 { USB_DEVICE(0x1b80, 0xe1cc),
2779 .driver_info = EM2874_BOARD_DELOCK_61959 },
2780 { USB_DEVICE(0x1ae7, 0x9003),
2781 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
2782 { USB_DEVICE(0x1ae7, 0x9004),
2783 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
2784 { USB_DEVICE(0x2013, 0x0258),
2785 .driver_info = EM28178_BOARD_PCTV_461E },
2786 { USB_DEVICE(0x2013, 0x8258), /* Bulk transport 461e */
2787 .driver_info = EM28178_BOARD_PCTV_461E },
2788 { USB_DEVICE(0x2013, 0x0461),
2789 .driver_info = EM28178_BOARD_PCTV_461E_V2 },
2790 { USB_DEVICE(0x2013, 0x8461), /* Bulk transport 461e v2 */
2791 .driver_info = EM28178_BOARD_PCTV_461E_V2 },
2792 { USB_DEVICE(0x2013, 0x0259),
2793 .driver_info = EM28178_BOARD_PCTV_461E_V2 },
2794 { USB_DEVICE(0x2013, 0x025f),
2795 .driver_info = EM28178_BOARD_PCTV_292E },
2796 { USB_DEVICE(0x2013, 0x0264), /* Hauppauge WinTV-soloHD 292e SE */
2797 .driver_info = EM28178_BOARD_PCTV_292E },
2798 { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD Isoc */
2799 .driver_info = EM28178_BOARD_PCTV_292E },
2800 { USB_DEVICE(0x2040, 0x8264), /* Hauppauge OEM Generic WinTV-soloHD Bulk */
2801 .driver_info = EM28178_BOARD_PCTV_292E },
2802 { USB_DEVICE(0x2040, 0x8268), /* Hauppauge Retail WinTV-soloHD Bulk */
2803 .driver_info = EM28178_BOARD_PCTV_292E },
2804 { USB_DEVICE(0x0413, 0x6f07),
2805 .driver_info = EM2861_BOARD_LEADTEK_VC100 },
2806 { USB_DEVICE(0xeb1a, 0x8179),
2807 .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD },
2808 { USB_DEVICE(0x3275, 0x0085),
2809 .driver_info = EM28178_BOARD_PLEX_PX_BCUD },
2810 { USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech svid2usb23 / Raygo R12-41373 */
2811 .driver_info = EM2860_BOARD_TVP5150_REFERENCE_DESIGN },
2812 { USB_DEVICE(0x1b80, 0xe349), /* Magix USB Videowandler-2 */
2813 .driver_info = EM2861_BOARD_MAGIX_VIDEOWANDLER2 },
2814 { },
2815 };
2816 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
2817
2818 /*
2819 * EEPROM hash table for devices with generic USB IDs
2820 */
2821 static const struct em28xx_hash_table em28xx_eeprom_hash[] = {
2822 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
2823 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
2824 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
2825 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
2826 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
2827 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
2828 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
2829 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
2830 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
2831 {0x85dd871e, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028},
2832 };
2833
2834 /* I2C devicelist hash table for devices with generic USB IDs */
2835 static const struct em28xx_hash_table em28xx_i2c_hash[] = {
2836 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
2837 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
2838 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
2839 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
2840 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
2841 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
2842 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
2843 {0x27e10080, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028},
2844 };
2845
2846 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */
2847
em28xx_tuner_callback(void * ptr,int component,int command,int arg)2848 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
2849 {
2850 struct em28xx_i2c_bus *i2c_bus = ptr;
2851 struct em28xx *dev = i2c_bus->dev;
2852 int rc = 0;
2853
2854 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
2855 return 0;
2856
2857 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
2858 return 0;
2859
2860 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
2861
2862 return rc;
2863 }
2864 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
2865
em28xx_set_xclk_i2c_speed(struct em28xx * dev)2866 static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev)
2867 {
2868 const struct em28xx_board *board = &em28xx_boards[dev->model];
2869 u8 xclk = board->xclk, i2c_speed = board->i2c_speed;
2870
2871 /*
2872 * Those are the default values for the majority of boards
2873 * Use those values if not specified otherwise at boards entry
2874 */
2875 if (!xclk)
2876 xclk = EM28XX_XCLK_IR_RC5_MODE |
2877 EM28XX_XCLK_FREQUENCY_12MHZ;
2878
2879 em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk);
2880
2881 if (!i2c_speed)
2882 i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2883 EM28XX_I2C_FREQ_100_KHZ;
2884
2885 dev->i2c_speed = i2c_speed & 0x03;
2886
2887 if (!dev->board.is_em2800)
2888 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, i2c_speed);
2889 msleep(50);
2890 }
2891
em28xx_set_model(struct em28xx * dev)2892 static inline void em28xx_set_model(struct em28xx *dev)
2893 {
2894 dev->board = em28xx_boards[dev->model];
2895 dev->has_msp34xx = dev->board.has_msp34xx;
2896 dev->is_webcam = dev->board.is_webcam;
2897
2898 em28xx_set_xclk_i2c_speed(dev);
2899
2900 /* Should be initialized early, for I2C to work */
2901 dev->def_i2c_bus = dev->board.def_i2c_bus;
2902 }
2903
2904 /*
2905 * Wait until AC97_RESET reports the expected value reliably before proceeding.
2906 * We also check that two unrelated registers accesses don't return the same
2907 * value to avoid premature return.
2908 * This procedure helps ensuring AC97 register accesses are reliable.
2909 */
em28xx_wait_until_ac97_features_equals(struct em28xx * dev,int expected_feat)2910 static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev,
2911 int expected_feat)
2912 {
2913 unsigned long timeout = jiffies + msecs_to_jiffies(2000);
2914 int feat, powerdown;
2915
2916 while (time_is_after_jiffies(timeout)) {
2917 feat = em28xx_read_ac97(dev, AC97_RESET);
2918 if (feat < 0)
2919 return feat;
2920
2921 powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN);
2922 if (powerdown < 0)
2923 return powerdown;
2924
2925 if (feat == expected_feat && feat != powerdown)
2926 return 0;
2927
2928 msleep(50);
2929 }
2930
2931 dev_warn(&dev->intf->dev, "AC97 registers access is not reliable !\n");
2932 return -ETIMEDOUT;
2933 }
2934
2935 /*
2936 * Since em28xx_pre_card_setup() requires a proper dev->model,
2937 * this won't work for boards with generic PCI IDs
2938 */
em28xx_pre_card_setup(struct em28xx * dev)2939 static void em28xx_pre_card_setup(struct em28xx *dev)
2940 {
2941 /*
2942 * Set the initial XCLK and I2C clock values based on the board
2943 * definition
2944 */
2945 em28xx_set_xclk_i2c_speed(dev);
2946
2947 /* request some modules */
2948 switch (dev->model) {
2949 case EM2861_BOARD_PLEXTOR_PX_TV100U:
2950 /* Sets the msp34xx I2S speed */
2951 dev->i2s_speed = 2048000;
2952 break;
2953 case EM2861_BOARD_KWORLD_PVRTV_300U:
2954 case EM2880_BOARD_KWORLD_DVB_305U:
2955 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d);
2956 usleep_range(10000, 11000);
2957 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d);
2958 usleep_range(10000, 11000);
2959 break;
2960 case EM2870_BOARD_COMPRO_VIDEOMATE:
2961 /*
2962 * TODO: someone can do some cleanup here...
2963 * not everything's needed
2964 */
2965 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2966 usleep_range(10000, 11000);
2967 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2968 usleep_range(10000, 11000);
2969 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
2970 msleep(70);
2971 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
2972 msleep(70);
2973 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc);
2974 msleep(70);
2975 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
2976 msleep(70);
2977 break;
2978 case EM2870_BOARD_TERRATEC_XS_MT2060:
2979 /*
2980 * this device needs some gpio writes to get the DVB-T
2981 * demod work
2982 */
2983 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2984 msleep(70);
2985 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
2986 msleep(70);
2987 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2988 msleep(70);
2989 break;
2990 case EM2870_BOARD_PINNACLE_PCTV_DVB:
2991 /*
2992 * this device needs some gpio writes to get the
2993 * DVB-T demod work
2994 */
2995 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
2996 msleep(70);
2997 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
2998 msleep(70);
2999 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
3000 msleep(70);
3001 break;
3002 case EM2820_BOARD_GADMEI_UTV310:
3003 case EM2820_BOARD_MSI_VOX_USB_2:
3004 /* enables audio for that devices */
3005 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
3006 break;
3007
3008 case EM2882_BOARD_KWORLD_ATSC_315U:
3009 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
3010 usleep_range(10000, 11000);
3011 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
3012 usleep_range(10000, 11000);
3013 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
3014 usleep_range(10000, 11000);
3015 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
3016 usleep_range(10000, 11000);
3017 break;
3018
3019 case EM2860_BOARD_KAIOMY_TVNPC_U2:
3020 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
3021 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
3022 em28xx_write_regs(dev, 0x0d, "\x42", 1);
3023 em28xx_write_regs(dev, 0x08, "\xfd", 1);
3024 usleep_range(10000, 11000);
3025 em28xx_write_regs(dev, 0x08, "\xff", 1);
3026 usleep_range(10000, 11000);
3027 em28xx_write_regs(dev, 0x08, "\x7f", 1);
3028 usleep_range(10000, 11000);
3029 em28xx_write_regs(dev, 0x08, "\x6b", 1);
3030
3031 break;
3032 case EM2860_BOARD_EASYCAP:
3033 em28xx_write_regs(dev, 0x08, "\xf8", 1);
3034 break;
3035
3036 case EM2820_BOARD_IODATA_GVMVP_SZ:
3037 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
3038 msleep(70);
3039 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
3040 usleep_range(10000, 11000);
3041 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
3042 msleep(70);
3043 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
3044 msleep(70);
3045 break;
3046
3047 case EM2860_BOARD_TERRATEC_GRABBY:
3048 /*
3049 * HACK?: Ensure AC97 register reading is reliable before
3050 * proceeding. In practice, this will wait about 1.6 seconds.
3051 */
3052 em28xx_wait_until_ac97_features_equals(dev, 0x6a90);
3053 break;
3054 }
3055
3056 em28xx_gpio_set(dev, dev->board.tuner_gpio);
3057 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
3058
3059 /* Unlock device */
3060 em28xx_set_mode(dev, EM28XX_SUSPEND);
3061 }
3062
em28xx_hint_board(struct em28xx * dev)3063 static int em28xx_hint_board(struct em28xx *dev)
3064 {
3065 int i;
3066
3067 if (dev->is_webcam) {
3068 if (dev->em28xx_sensor == EM28XX_MT9V011) {
3069 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
3070 } else if (dev->em28xx_sensor == EM28XX_MT9M001 ||
3071 dev->em28xx_sensor == EM28XX_MT9M111) {
3072 dev->model = EM2750_BOARD_UNKNOWN;
3073 }
3074 /* FIXME: IMPROVE ! */
3075
3076 return 0;
3077 }
3078
3079 /*
3080 * HINT method: EEPROM
3081 *
3082 * This method works only for boards with eeprom.
3083 * Uses a hash of all eeprom bytes. The hash should be
3084 * unique for a vendor/tuner pair.
3085 * There are a high chance that tuners for different
3086 * video standards produce different hashes.
3087 */
3088 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
3089 if (dev->hash == em28xx_eeprom_hash[i].hash) {
3090 dev->model = em28xx_eeprom_hash[i].model;
3091 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
3092
3093 dev_err(&dev->intf->dev,
3094 "Your board has no unique USB ID.\n"
3095 "A hint were successfully done, based on eeprom hash.\n"
3096 "This method is not 100%% failproof.\n"
3097 "If the board were misdetected, please email this log to:\n"
3098 "\tV4L Mailing List <linux-media@vger.kernel.org>\n"
3099 "Board detected as %s\n",
3100 em28xx_boards[dev->model].name);
3101
3102 return 0;
3103 }
3104 }
3105
3106 /*
3107 * HINT method: I2C attached devices
3108 *
3109 * This method works for all boards.
3110 * Uses a hash of i2c scanned devices.
3111 * Devices with the same i2c attached chips will
3112 * be considered equal.
3113 * This method is less precise than the eeprom one.
3114 */
3115
3116 /* user did not request i2c scanning => do it now */
3117 if (!dev->i2c_hash)
3118 em28xx_do_i2c_scan(dev, dev->def_i2c_bus);
3119
3120 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
3121 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
3122 dev->model = em28xx_i2c_hash[i].model;
3123 dev->tuner_type = em28xx_i2c_hash[i].tuner;
3124 dev_err(&dev->intf->dev,
3125 "Your board has no unique USB ID.\n"
3126 "A hint were successfully done, based on i2c devicelist hash.\n"
3127 "This method is not 100%% failproof.\n"
3128 "If the board were misdetected, please email this log to:\n"
3129 "\tV4L Mailing List <linux-media@vger.kernel.org>\n"
3130 "Board detected as %s\n",
3131 em28xx_boards[dev->model].name);
3132
3133 return 0;
3134 }
3135 }
3136
3137 dev_err(&dev->intf->dev,
3138 "Your board has no unique USB ID and thus need a hint to be detected.\n"
3139 "You may try to use card=<n> insmod option to workaround that.\n"
3140 "Please send an email with this log to:\n"
3141 "\tV4L Mailing List <linux-media@vger.kernel.org>\n"
3142 "Board eeprom hash is 0x%08lx\n"
3143 "Board i2c devicelist hash is 0x%08lx\n",
3144 dev->hash, dev->i2c_hash);
3145
3146 dev_err(&dev->intf->dev,
3147 "Here is a list of valid choices for the card=<n> insmod option:\n");
3148 for (i = 0; i < em28xx_bcount; i++) {
3149 dev_err(&dev->intf->dev,
3150 " card=%d -> %s\n", i, em28xx_boards[i].name);
3151 }
3152 return -1;
3153 }
3154
em28xx_card_setup(struct em28xx * dev)3155 static void em28xx_card_setup(struct em28xx *dev)
3156 {
3157 int i, j, idx;
3158 bool duplicate_entry;
3159
3160 /*
3161 * If the device can be a webcam, seek for a sensor.
3162 * If sensor is not found, then it isn't a webcam.
3163 */
3164 if (dev->is_webcam) {
3165 em28xx_detect_sensor(dev);
3166 if (dev->em28xx_sensor == EM28XX_NOSENSOR)
3167 /* NOTE: error/unknown sensor/no sensor */
3168 dev->is_webcam = 0;
3169 }
3170
3171 switch (dev->model) {
3172 case EM2750_BOARD_UNKNOWN:
3173 case EM2820_BOARD_UNKNOWN:
3174 case EM2800_BOARD_UNKNOWN:
3175 /*
3176 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
3177 *
3178 * This occurs because they share identical USB vendor and
3179 * product IDs.
3180 *
3181 * What we do here is look up the EEPROM hash of the K-WORLD
3182 * and if it is found then we decide that we do not have
3183 * a DIGIVOX and reset the device to the K-WORLD instead.
3184 *
3185 * This solution is only valid if they do not share eeprom
3186 * hash identities which has not been determined as yet.
3187 */
3188 if (em28xx_hint_board(dev) < 0) {
3189 dev_err(&dev->intf->dev, "Board not discovered\n");
3190 } else {
3191 em28xx_set_model(dev);
3192 em28xx_pre_card_setup(dev);
3193 }
3194 break;
3195 default:
3196 em28xx_set_model(dev);
3197 }
3198
3199 dev_info(&dev->intf->dev, "Identified as %s (card=%d)\n",
3200 dev->board.name, dev->model);
3201
3202 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
3203
3204 /* request some modules */
3205 switch (dev->model) {
3206 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
3207 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
3208 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
3209 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
3210 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
3211 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
3212 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB:
3213 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595:
3214 {
3215 struct tveeprom tv;
3216
3217 if (!dev->eedata)
3218 break;
3219 #if defined(CONFIG_MODULES) && defined(MODULE)
3220 request_module("tveeprom");
3221 #endif
3222 /* Call first TVeeprom */
3223
3224 tveeprom_hauppauge_analog(&tv, dev->eedata);
3225
3226 dev->tuner_type = tv.tuner_type;
3227
3228 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) {
3229 dev->i2s_speed = 2048000;
3230 dev->has_msp34xx = 1;
3231 }
3232 break;
3233 }
3234 case EM2882_BOARD_KWORLD_ATSC_315U:
3235 em28xx_write_reg(dev, 0x0d, 0x42);
3236 usleep_range(10000, 11000);
3237 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
3238 usleep_range(10000, 11000);
3239 break;
3240 case EM2820_BOARD_KWORLD_PVRTV2800RF:
3241 /* GPIO enables sound on KWORLD PVR TV 2800RF */
3242 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9);
3243 break;
3244 case EM2820_BOARD_UNKNOWN:
3245 case EM2800_BOARD_UNKNOWN:
3246 /*
3247 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
3248 *
3249 * This occurs because they share identical USB vendor and
3250 * product IDs.
3251 *
3252 * What we do here is look up the EEPROM hash of the K-WORLD
3253 * and if it is found then we decide that we do not have
3254 * a DIGIVOX and reset the device to the K-WORLD instead.
3255 *
3256 * This solution is only valid if they do not share eeprom
3257 * hash identities which has not been determined as yet.
3258 */
3259 case EM2880_BOARD_MSI_DIGIVOX_AD:
3260 if (!em28xx_hint_board(dev))
3261 em28xx_set_model(dev);
3262
3263 /*
3264 * In cases where we had to use a board hint, the call to
3265 * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
3266 * so make the call now so the analog GPIOs are set properly
3267 * before probing the i2c bus.
3268 */
3269 em28xx_gpio_set(dev, dev->board.tuner_gpio);
3270 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
3271 break;
3272
3273 /*
3274 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
3275 *
3276 * This occurs because they share identical USB vendor and
3277 * product IDs.
3278 *
3279 * What we do here is look up the EEPROM hash of the Dikom
3280 * and if it is found then we decide that we do not have
3281 * a Kworld and reset the device to the Dikom instead.
3282 *
3283 * This solution is only valid if they do not share eeprom
3284 * hash identities which has not been determined as yet.
3285 */
3286 case EM2882_BOARD_KWORLD_VS_DVBT:
3287 if (!em28xx_hint_board(dev))
3288 em28xx_set_model(dev);
3289
3290 /*
3291 * In cases where we had to use a board hint, the call to
3292 * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
3293 * so make the call now so the analog GPIOs are set properly
3294 * before probing the i2c bus.
3295 */
3296 em28xx_gpio_set(dev, dev->board.tuner_gpio);
3297 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
3298 break;
3299 }
3300
3301 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
3302 dev_err(&dev->intf->dev,
3303 "\n\n"
3304 "The support for this board weren't valid yet.\n"
3305 "Please send a report of having this working\n"
3306 "not to V4L mailing list (and/or to other addresses)\n\n");
3307 }
3308
3309 /* Free eeprom data memory */
3310 kfree(dev->eedata);
3311 dev->eedata = NULL;
3312
3313 /* Allow override tuner type by a module parameter */
3314 if (tuner >= 0)
3315 dev->tuner_type = tuner;
3316
3317 /*
3318 * Dynamically generate a list of valid audio inputs for this
3319 * specific board, mapping them via enum em28xx_amux.
3320 */
3321
3322 idx = 0;
3323 for (i = 0; i < MAX_EM28XX_INPUT; i++) {
3324 if (!INPUT(i)->type)
3325 continue;
3326
3327 /* Skip already mapped audio inputs */
3328 duplicate_entry = false;
3329 for (j = 0; j < idx; j++) {
3330 if (INPUT(i)->amux == dev->amux_map[j]) {
3331 duplicate_entry = true;
3332 break;
3333 }
3334 }
3335 if (duplicate_entry)
3336 continue;
3337
3338 dev->amux_map[idx++] = INPUT(i)->amux;
3339 }
3340 for (; idx < MAX_EM28XX_INPUT; idx++)
3341 dev->amux_map[idx] = EM28XX_AMUX_UNUSED;
3342 }
3343
em28xx_setup_xc3028(struct em28xx * dev,struct xc2028_ctrl * ctl)3344 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
3345 {
3346 memset(ctl, 0, sizeof(*ctl));
3347
3348 ctl->fname = XC2028_DEFAULT_FIRMWARE;
3349 ctl->max_len = 64;
3350 ctl->mts = em28xx_boards[dev->model].mts_firmware;
3351
3352 switch (dev->model) {
3353 case EM2880_BOARD_EMPIRE_DUAL_TV:
3354 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
3355 case EM2882_BOARD_TERRATEC_HYBRID_XS:
3356 case EM2880_BOARD_TERRATEC_HYBRID_XS:
3357 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
3358 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
3359 case EM2882_BOARD_ZOLID_HYBRID_TV_STICK:
3360 ctl->demod = XC3028_FE_ZARLINK456;
3361 break;
3362 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
3363 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
3364 ctl->demod = XC3028_FE_DEFAULT;
3365 break;
3366 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
3367 ctl->demod = XC3028_FE_DEFAULT;
3368 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
3369 break;
3370 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
3371 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
3372 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
3373 /* FIXME: Better to specify the needed IF */
3374 ctl->demod = XC3028_FE_DEFAULT;
3375 break;
3376 case EM2883_BOARD_KWORLD_HYBRID_330U:
3377 case EM2882_BOARD_DIKOM_DK300:
3378 case EM2882_BOARD_KWORLD_VS_DVBT:
3379 ctl->demod = XC3028_FE_CHINA;
3380 ctl->fname = XC2028_DEFAULT_FIRMWARE;
3381 break;
3382 case EM2882_BOARD_EVGA_INDTUBE:
3383 ctl->demod = XC3028_FE_CHINA;
3384 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
3385 break;
3386 default:
3387 ctl->demod = XC3028_FE_OREN538;
3388 }
3389 }
3390 EXPORT_SYMBOL_GPL(em28xx_setup_xc3028);
3391
request_module_async(struct work_struct * work)3392 static void request_module_async(struct work_struct *work)
3393 {
3394 struct em28xx *dev = container_of(work,
3395 struct em28xx, request_module_wk);
3396
3397 /*
3398 * The em28xx extensions can be modules or builtin. If the
3399 * modules are already loaded or are built in, those extensions
3400 * can be initialised right now. Otherwise, the module init
3401 * code will do it.
3402 */
3403
3404 /*
3405 * Devices with an audio-only intf also have a V4L/DVB/RC
3406 * intf. Don't register extensions twice on those devices.
3407 */
3408 if (dev->is_audio_only) {
3409 #if defined(CONFIG_MODULES) && defined(MODULE)
3410 request_module("em28xx-alsa");
3411 #endif
3412 return;
3413 }
3414
3415 em28xx_init_extension(dev);
3416
3417 #if defined(CONFIG_MODULES) && defined(MODULE)
3418 if (dev->has_video)
3419 request_module("em28xx-v4l");
3420 if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS)
3421 request_module("snd-usb-audio");
3422 else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR)
3423 request_module("em28xx-alsa");
3424 if (dev->board.has_dvb)
3425 request_module("em28xx-dvb");
3426 if (dev->board.buttons ||
3427 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir))
3428 request_module("em28xx-rc");
3429 #endif /* CONFIG_MODULES */
3430 }
3431
request_modules(struct em28xx * dev)3432 static void request_modules(struct em28xx *dev)
3433 {
3434 INIT_WORK(&dev->request_module_wk, request_module_async);
3435 schedule_work(&dev->request_module_wk);
3436 }
3437
flush_request_modules(struct em28xx * dev)3438 static void flush_request_modules(struct em28xx *dev)
3439 {
3440 flush_work(&dev->request_module_wk);
3441 }
3442
em28xx_media_device_init(struct em28xx * dev,struct usb_device * udev)3443 static int em28xx_media_device_init(struct em28xx *dev,
3444 struct usb_device *udev)
3445 {
3446 #ifdef CONFIG_MEDIA_CONTROLLER
3447 struct media_device *mdev;
3448
3449 mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
3450 if (!mdev)
3451 return -ENOMEM;
3452
3453 if (udev->product)
3454 media_device_usb_init(mdev, udev, udev->product);
3455 else if (udev->manufacturer)
3456 media_device_usb_init(mdev, udev, udev->manufacturer);
3457 else
3458 media_device_usb_init(mdev, udev, dev_name(&dev->intf->dev));
3459
3460 dev->media_dev = mdev;
3461 #endif
3462 return 0;
3463 }
3464
em28xx_unregister_media_device(struct em28xx * dev)3465 static void em28xx_unregister_media_device(struct em28xx *dev)
3466 {
3467 #ifdef CONFIG_MEDIA_CONTROLLER
3468 if (dev->media_dev) {
3469 media_device_unregister(dev->media_dev);
3470 media_device_cleanup(dev->media_dev);
3471 kfree(dev->media_dev);
3472 dev->media_dev = NULL;
3473 }
3474 #endif
3475 }
3476
3477 /*
3478 * em28xx_release_resources()
3479 * unregisters the v4l2,i2c and usb devices
3480 * called when the device gets disconnected or at module unload
3481 */
em28xx_release_resources(struct em28xx * dev)3482 static void em28xx_release_resources(struct em28xx *dev)
3483 {
3484 struct usb_device *udev = interface_to_usbdev(dev->intf);
3485
3486 /*FIXME: I2C IR should be disconnected */
3487
3488 mutex_lock(&dev->lock);
3489
3490 em28xx_unregister_media_device(dev);
3491
3492 if (dev->def_i2c_bus)
3493 em28xx_i2c_unregister(dev, 1);
3494 em28xx_i2c_unregister(dev, 0);
3495
3496 if (dev->ts == PRIMARY_TS)
3497 usb_put_dev(udev);
3498
3499 /* Mark device as unused */
3500 clear_bit(dev->devno, em28xx_devused);
3501
3502 mutex_unlock(&dev->lock);
3503 };
3504
3505 /**
3506 * em28xx_free_device() - Free em28xx device
3507 *
3508 * @ref: struct kref for em28xx device
3509 *
3510 * This is called when all extensions and em28xx core unregisters a device
3511 */
em28xx_free_device(struct kref * ref)3512 void em28xx_free_device(struct kref *ref)
3513 {
3514 struct em28xx *dev = kref_to_dev(ref);
3515
3516 dev_info(&dev->intf->dev, "Freeing device\n");
3517
3518 if (!dev->disconnected)
3519 em28xx_release_resources(dev);
3520
3521 if (dev->ts == PRIMARY_TS)
3522 kfree(dev->alt_max_pkt_size_isoc);
3523
3524 kfree(dev);
3525 }
3526 EXPORT_SYMBOL_GPL(em28xx_free_device);
3527
3528 /*
3529 * em28xx_init_dev()
3530 * allocates and inits the device structs, registers i2c bus and v4l device
3531 */
em28xx_init_dev(struct em28xx * dev,struct usb_device * udev,struct usb_interface * intf,int minor)3532 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
3533 struct usb_interface *intf,
3534 int minor)
3535 {
3536 int retval;
3537 const char *chip_name = NULL;
3538
3539 dev->intf = intf;
3540 mutex_init(&dev->ctrl_urb_lock);
3541 spin_lock_init(&dev->slock);
3542
3543 dev->em28xx_write_regs = em28xx_write_regs;
3544 dev->em28xx_read_reg = em28xx_read_reg;
3545 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
3546 dev->em28xx_write_regs_req = em28xx_write_regs_req;
3547 dev->em28xx_read_reg_req = em28xx_read_reg_req;
3548 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
3549
3550 em28xx_set_model(dev);
3551
3552 dev->wait_after_write = 5;
3553
3554 /* Based on the Chip ID, set the device configuration */
3555 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
3556 if (retval > 0) {
3557 dev->chip_id = retval;
3558
3559 switch (dev->chip_id) {
3560 case CHIP_ID_EM2800:
3561 chip_name = "em2800";
3562 break;
3563 case CHIP_ID_EM2710:
3564 chip_name = "em2710";
3565 break;
3566 case CHIP_ID_EM2750:
3567 chip_name = "em2750";
3568 break;
3569 case CHIP_ID_EM2765:
3570 chip_name = "em2765";
3571 dev->wait_after_write = 0;
3572 dev->is_em25xx = 1;
3573 dev->eeprom_addrwidth_16bit = 1;
3574 break;
3575 case CHIP_ID_EM2820:
3576 chip_name = "em2710/2820";
3577 if (le16_to_cpu(udev->descriptor.idVendor) == 0xeb1a) {
3578 __le16 idProd = udev->descriptor.idProduct;
3579
3580 if (le16_to_cpu(idProd) == 0x2710)
3581 chip_name = "em2710";
3582 else if (le16_to_cpu(idProd) == 0x2820)
3583 chip_name = "em2820";
3584 }
3585 /* NOTE: the em2820 is used in webcams, too ! */
3586 break;
3587 case CHIP_ID_EM2840:
3588 chip_name = "em2840";
3589 break;
3590 case CHIP_ID_EM2860:
3591 chip_name = "em2860";
3592 break;
3593 case CHIP_ID_EM2870:
3594 chip_name = "em2870";
3595 dev->wait_after_write = 0;
3596 break;
3597 case CHIP_ID_EM2874:
3598 chip_name = "em2874";
3599 dev->wait_after_write = 0;
3600 dev->eeprom_addrwidth_16bit = 1;
3601 break;
3602 case CHIP_ID_EM28174:
3603 chip_name = "em28174";
3604 dev->wait_after_write = 0;
3605 dev->eeprom_addrwidth_16bit = 1;
3606 break;
3607 case CHIP_ID_EM28178:
3608 chip_name = "em28178";
3609 dev->wait_after_write = 0;
3610 dev->eeprom_addrwidth_16bit = 1;
3611 break;
3612 case CHIP_ID_EM2883:
3613 chip_name = "em2882/3";
3614 dev->wait_after_write = 0;
3615 break;
3616 case CHIP_ID_EM2884:
3617 chip_name = "em2884";
3618 dev->wait_after_write = 0;
3619 dev->eeprom_addrwidth_16bit = 1;
3620 break;
3621 }
3622 }
3623 if (!chip_name)
3624 dev_info(&dev->intf->dev,
3625 "unknown em28xx chip ID (%d)\n", dev->chip_id);
3626 else
3627 dev_info(&dev->intf->dev, "chip ID is %s\n", chip_name);
3628
3629 em28xx_media_device_init(dev, udev);
3630
3631 if (dev->is_audio_only) {
3632 retval = em28xx_audio_setup(dev);
3633 if (retval) {
3634 retval = -ENODEV;
3635 goto err_deinit_media;
3636 }
3637 em28xx_init_extension(dev);
3638
3639 return 0;
3640 }
3641
3642 em28xx_pre_card_setup(dev);
3643
3644 rt_mutex_init(&dev->i2c_bus_lock);
3645
3646 /* register i2c bus 0 */
3647 if (dev->board.is_em2800)
3648 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800);
3649 else
3650 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX);
3651 if (retval < 0) {
3652 dev_err(&dev->intf->dev,
3653 "%s: em28xx_i2c_register bus 0 - error [%d]!\n",
3654 __func__, retval);
3655 goto err_deinit_media;
3656 }
3657
3658 /* register i2c bus 1 */
3659 if (dev->def_i2c_bus) {
3660 if (dev->is_em25xx)
3661 retval = em28xx_i2c_register(dev, 1,
3662 EM28XX_I2C_ALGO_EM25XX_BUS_B);
3663 else
3664 retval = em28xx_i2c_register(dev, 1,
3665 EM28XX_I2C_ALGO_EM28XX);
3666 if (retval < 0) {
3667 dev_err(&dev->intf->dev,
3668 "%s: em28xx_i2c_register bus 1 - error [%d]!\n",
3669 __func__, retval);
3670
3671 goto err_unreg_i2c;
3672 }
3673 }
3674
3675 /* Do board specific init and eeprom reading */
3676 em28xx_card_setup(dev);
3677
3678 return 0;
3679
3680 err_unreg_i2c:
3681 em28xx_i2c_unregister(dev, 0);
3682 err_deinit_media:
3683 em28xx_unregister_media_device(dev);
3684 return retval;
3685 }
3686
em28xx_duplicate_dev(struct em28xx * dev)3687 static int em28xx_duplicate_dev(struct em28xx *dev)
3688 {
3689 int nr;
3690 struct em28xx *sec_dev = kmemdup(dev, sizeof(*sec_dev), GFP_KERNEL);
3691
3692 if (!sec_dev) {
3693 dev->dev_next = NULL;
3694 return -ENOMEM;
3695 }
3696 /* Check to see next free device and mark as used */
3697 do {
3698 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS);
3699 if (nr >= EM28XX_MAXBOARDS) {
3700 /* No free device slots */
3701 dev_warn(&dev->intf->dev, ": Supports only %i em28xx boards.\n",
3702 EM28XX_MAXBOARDS);
3703 kfree(sec_dev);
3704 dev->dev_next = NULL;
3705 return -ENOMEM;
3706 }
3707 } while (test_and_set_bit(nr, em28xx_devused));
3708 sec_dev->devno = nr;
3709 snprintf(sec_dev->name, 28, "em28xx #%d", nr);
3710 sec_dev->dev_next = NULL;
3711 dev->dev_next = sec_dev;
3712 return 0;
3713 }
3714
3715 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
3716 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
3717
em28xx_check_usb_descriptor(struct em28xx * dev,struct usb_device * udev,struct usb_interface * intf,int alt,int ep,bool * has_vendor_audio,bool * has_video,bool * has_dvb)3718 static void em28xx_check_usb_descriptor(struct em28xx *dev,
3719 struct usb_device *udev,
3720 struct usb_interface *intf,
3721 int alt, int ep,
3722 bool *has_vendor_audio,
3723 bool *has_video,
3724 bool *has_dvb)
3725 {
3726 const struct usb_endpoint_descriptor *e;
3727 int sizedescr, size;
3728
3729 /*
3730 * NOTE:
3731 *
3732 * Old logic with support for isoc transfers only was:
3733 * 0x82 isoc => analog
3734 * 0x83 isoc => audio
3735 * 0x84 isoc => digital
3736 *
3737 * New logic with support for bulk transfers
3738 * 0x82 isoc => analog
3739 * 0x82 bulk => analog
3740 * 0x83 isoc* => audio
3741 * 0x84 isoc => digital
3742 * 0x84 bulk => analog or digital**
3743 * 0x85 isoc => digital TS2
3744 * 0x85 bulk => digital TS2
3745 * (*: audio should always be isoc)
3746 * (**: analog, if ep 0x82 is isoc, otherwise digital)
3747 *
3748 * The new logic preserves backwards compatibility and
3749 * reflects the endpoint configurations we have seen
3750 * so far. But there might be devices for which this
3751 * logic is not sufficient...
3752 */
3753
3754 e = &intf->altsetting[alt].endpoint[ep].desc;
3755
3756 if (!usb_endpoint_dir_in(e))
3757 return;
3758
3759 sizedescr = le16_to_cpu(e->wMaxPacketSize);
3760 size = sizedescr & 0x7ff;
3761
3762 if (udev->speed == USB_SPEED_HIGH)
3763 size = size * hb_mult(sizedescr);
3764
3765 /* Only inspect input endpoints */
3766
3767 switch (e->bEndpointAddress) {
3768 case 0x82:
3769 *has_video = true;
3770 if (usb_endpoint_xfer_isoc(e)) {
3771 dev->analog_ep_isoc = e->bEndpointAddress;
3772 dev->alt_max_pkt_size_isoc[alt] = size;
3773 } else if (usb_endpoint_xfer_bulk(e)) {
3774 dev->analog_ep_bulk = e->bEndpointAddress;
3775 }
3776 return;
3777 case 0x83:
3778 if (usb_endpoint_xfer_isoc(e))
3779 *has_vendor_audio = true;
3780 else
3781 dev_err(&intf->dev,
3782 "error: skipping audio endpoint 0x83, because it uses bulk transfers !\n");
3783 return;
3784 case 0x84:
3785 if (*has_video && (usb_endpoint_xfer_bulk(e))) {
3786 dev->analog_ep_bulk = e->bEndpointAddress;
3787 } else {
3788 if (usb_endpoint_xfer_isoc(e)) {
3789 if (size > dev->dvb_max_pkt_size_isoc) {
3790 /*
3791 * 2) some manufacturers (e.g. Terratec)
3792 * disable endpoints by setting
3793 * wMaxPacketSize to 0 bytes for all
3794 * alt settings. So far, we've seen
3795 * this for DVB isoc endpoints only.
3796 */
3797 *has_dvb = true;
3798 dev->dvb_ep_isoc = e->bEndpointAddress;
3799 dev->dvb_max_pkt_size_isoc = size;
3800 dev->dvb_alt_isoc = alt;
3801 }
3802 } else {
3803 *has_dvb = true;
3804 dev->dvb_ep_bulk = e->bEndpointAddress;
3805 }
3806 }
3807 return;
3808 case 0x85:
3809 if (usb_endpoint_xfer_isoc(e)) {
3810 if (size > dev->dvb_max_pkt_size_isoc_ts2) {
3811 dev->dvb_ep_isoc_ts2 = e->bEndpointAddress;
3812 dev->dvb_max_pkt_size_isoc_ts2 = size;
3813 dev->dvb_alt_isoc = alt;
3814 }
3815 } else {
3816 dev->dvb_ep_bulk_ts2 = e->bEndpointAddress;
3817 }
3818 return;
3819 }
3820 }
3821
3822 /*
3823 * em28xx_usb_probe()
3824 * checks for supported devices
3825 */
em28xx_usb_probe(struct usb_interface * intf,const struct usb_device_id * id)3826 static int em28xx_usb_probe(struct usb_interface *intf,
3827 const struct usb_device_id *id)
3828 {
3829 struct usb_device *udev;
3830 struct em28xx *dev = NULL;
3831 int retval;
3832 bool has_vendor_audio = false, has_video = false, has_dvb = false;
3833 int i, nr, try_bulk;
3834 const int ifnum = intf->altsetting[0].desc.bInterfaceNumber;
3835 char *speed;
3836
3837 udev = usb_get_dev(interface_to_usbdev(intf));
3838
3839 /* Check to see next free device and mark as used */
3840 do {
3841 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS);
3842 if (nr >= EM28XX_MAXBOARDS) {
3843 /* No free device slots */
3844 dev_err(&intf->dev,
3845 "Driver supports up to %i em28xx boards.\n",
3846 EM28XX_MAXBOARDS);
3847 retval = -ENOMEM;
3848 goto err_no_slot;
3849 }
3850 } while (test_and_set_bit(nr, em28xx_devused));
3851
3852 /* Don't register audio interfaces */
3853 if (intf->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3854 dev_info(&intf->dev,
3855 "audio device (%04x:%04x): interface %i, class %i\n",
3856 le16_to_cpu(udev->descriptor.idVendor),
3857 le16_to_cpu(udev->descriptor.idProduct),
3858 ifnum,
3859 intf->altsetting[0].desc.bInterfaceClass);
3860
3861 retval = -ENODEV;
3862 goto err;
3863 }
3864
3865 /* allocate memory for our device state and initialize it */
3866 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3867 if (!dev) {
3868 retval = -ENOMEM;
3869 goto err;
3870 }
3871
3872 /* compute alternate max packet sizes */
3873 dev->alt_max_pkt_size_isoc = kcalloc(intf->num_altsetting,
3874 sizeof(dev->alt_max_pkt_size_isoc[0]),
3875 GFP_KERNEL);
3876 if (!dev->alt_max_pkt_size_isoc) {
3877 kfree(dev);
3878 retval = -ENOMEM;
3879 goto err;
3880 }
3881
3882 /* Get endpoints */
3883 for (i = 0; i < intf->num_altsetting; i++) {
3884 int ep;
3885
3886 for (ep = 0;
3887 ep < intf->altsetting[i].desc.bNumEndpoints;
3888 ep++)
3889 em28xx_check_usb_descriptor(dev, udev, intf,
3890 i, ep,
3891 &has_vendor_audio,
3892 &has_video,
3893 &has_dvb);
3894 }
3895
3896 if (!(has_vendor_audio || has_video || has_dvb)) {
3897 retval = -ENODEV;
3898 goto err_free;
3899 }
3900
3901 switch (udev->speed) {
3902 case USB_SPEED_LOW:
3903 speed = "1.5";
3904 break;
3905 case USB_SPEED_UNKNOWN:
3906 case USB_SPEED_FULL:
3907 speed = "12";
3908 break;
3909 case USB_SPEED_HIGH:
3910 speed = "480";
3911 break;
3912 default:
3913 speed = "unknown";
3914 }
3915
3916 dev_info(&intf->dev,
3917 "New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n",
3918 udev->manufacturer ? udev->manufacturer : "",
3919 udev->product ? udev->product : "",
3920 speed,
3921 le16_to_cpu(udev->descriptor.idVendor),
3922 le16_to_cpu(udev->descriptor.idProduct),
3923 ifnum,
3924 intf->altsetting->desc.bInterfaceNumber);
3925
3926 /*
3927 * Make sure we have 480 Mbps of bandwidth, otherwise things like
3928 * video stream wouldn't likely work, since 12 Mbps is generally
3929 * not enough even for most Digital TV streams.
3930 */
3931 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3932 dev_err(&intf->dev, "Device initialization failed.\n");
3933 dev_err(&intf->dev,
3934 "Device must be connected to a high-speed USB 2.0 port.\n");
3935 retval = -ENODEV;
3936 goto err_free;
3937 }
3938
3939 kref_init(&dev->ref);
3940
3941 dev->devno = nr;
3942 dev->model = id->driver_info;
3943 dev->alt = -1;
3944 dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb);
3945 dev->has_video = has_video;
3946 dev->ifnum = ifnum;
3947
3948 dev->ts = PRIMARY_TS;
3949 snprintf(dev->name, 28, "em28xx");
3950 dev->dev_next = NULL;
3951
3952 if (has_vendor_audio) {
3953 dev_info(&intf->dev,
3954 "Audio interface %i found (Vendor Class)\n", ifnum);
3955 dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR;
3956 }
3957 /* Checks if audio is provided by a USB Audio Class intf */
3958 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3959 struct usb_interface *uif = udev->config->interface[i];
3960
3961 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3962 if (has_vendor_audio)
3963 dev_err(&intf->dev,
3964 "em28xx: device seems to have vendor AND usb audio class interfaces !\n"
3965 "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n");
3966 dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS;
3967 break;
3968 }
3969 }
3970
3971 if (has_video)
3972 dev_info(&intf->dev, "Video interface %i found:%s%s\n",
3973 ifnum,
3974 dev->analog_ep_bulk ? " bulk" : "",
3975 dev->analog_ep_isoc ? " isoc" : "");
3976 if (has_dvb)
3977 dev_info(&intf->dev, "DVB interface %i found:%s%s\n",
3978 ifnum,
3979 dev->dvb_ep_bulk ? " bulk" : "",
3980 dev->dvb_ep_isoc ? " isoc" : "");
3981
3982 dev->num_alt = intf->num_altsetting;
3983
3984 if ((unsigned int)card[nr] < em28xx_bcount)
3985 dev->model = card[nr];
3986
3987 /* save our data pointer in this intf device */
3988 usb_set_intfdata(intf, dev);
3989
3990 /* allocate device struct and check if the device is a webcam */
3991 mutex_init(&dev->lock);
3992 retval = em28xx_init_dev(dev, udev, intf, nr);
3993 if (retval)
3994 goto err_free;
3995
3996 if (usb_xfer_mode < 0) {
3997 if (dev->is_webcam)
3998 try_bulk = 1;
3999 else
4000 try_bulk = 0;
4001 } else {
4002 try_bulk = usb_xfer_mode > 0;
4003 }
4004
4005 /* Disable V4L2 if the device doesn't have a decoder or image sensor */
4006 if (has_video &&
4007 dev->board.decoder == EM28XX_NODECODER &&
4008 dev->em28xx_sensor == EM28XX_NOSENSOR) {
4009 dev_err(&intf->dev,
4010 "Currently, V4L2 is not supported on this model\n");
4011 has_video = false;
4012 dev->has_video = false;
4013 }
4014
4015 if (dev->board.has_dual_ts &&
4016 (dev->tuner_type != TUNER_ABSENT || INPUT(0)->type)) {
4017 /*
4018 * The logic with sets alternate is not ready for dual-tuners
4019 * which analog modes.
4020 */
4021 dev_err(&intf->dev,
4022 "We currently don't support analog TV or stream capture on dual tuners.\n");
4023 has_video = false;
4024 }
4025
4026 /* Select USB transfer types to use */
4027 if (has_video) {
4028 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk))
4029 dev->analog_xfer_bulk = 1;
4030 dev_info(&intf->dev, "analog set to %s mode.\n",
4031 dev->analog_xfer_bulk ? "bulk" : "isoc");
4032 }
4033 if (has_dvb) {
4034 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk))
4035 dev->dvb_xfer_bulk = 1;
4036 dev_info(&intf->dev, "dvb set to %s mode.\n",
4037 dev->dvb_xfer_bulk ? "bulk" : "isoc");
4038 }
4039
4040 if (dev->board.has_dual_ts && em28xx_duplicate_dev(dev) == 0) {
4041 kref_init(&dev->dev_next->ref);
4042
4043 dev->dev_next->ts = SECONDARY_TS;
4044 dev->dev_next->alt = -1;
4045 dev->dev_next->is_audio_only = has_vendor_audio &&
4046 !(has_video || has_dvb);
4047 dev->dev_next->has_video = false;
4048 dev->dev_next->ifnum = ifnum;
4049 dev->dev_next->model = id->driver_info;
4050
4051 mutex_init(&dev->dev_next->lock);
4052 retval = em28xx_init_dev(dev->dev_next, udev, intf,
4053 dev->dev_next->devno);
4054 if (retval)
4055 goto err_free;
4056
4057 dev->dev_next->board.ir_codes = NULL; /* No IR for 2nd tuner */
4058 dev->dev_next->board.has_ir_i2c = 0; /* No IR for 2nd tuner */
4059
4060 if (usb_xfer_mode < 0) {
4061 if (dev->dev_next->is_webcam)
4062 try_bulk = 1;
4063 else
4064 try_bulk = 0;
4065 } else {
4066 try_bulk = usb_xfer_mode > 0;
4067 }
4068
4069 /* Select USB transfer types to use */
4070 if (has_dvb) {
4071 if (!dev->dvb_ep_isoc_ts2 ||
4072 (try_bulk && dev->dvb_ep_bulk_ts2))
4073 dev->dev_next->dvb_xfer_bulk = 1;
4074 dev_info(&dev->intf->dev, "dvb ts2 set to %s mode.\n",
4075 dev->dev_next->dvb_xfer_bulk ? "bulk" : "isoc");
4076 }
4077
4078 dev->dev_next->dvb_ep_isoc = dev->dvb_ep_isoc_ts2;
4079 dev->dev_next->dvb_ep_bulk = dev->dvb_ep_bulk_ts2;
4080 dev->dev_next->dvb_max_pkt_size_isoc = dev->dvb_max_pkt_size_isoc_ts2;
4081 dev->dev_next->dvb_alt_isoc = dev->dvb_alt_isoc;
4082
4083 /* Configure hardware to support TS2*/
4084 if (dev->dvb_xfer_bulk) {
4085 /* The ep4 and ep5 are configured for BULK */
4086 em28xx_write_reg(dev, 0x0b, 0x96);
4087 mdelay(100);
4088 em28xx_write_reg(dev, 0x0b, 0x80);
4089 mdelay(100);
4090 } else {
4091 /* The ep4 and ep5 are configured for ISO */
4092 em28xx_write_reg(dev, 0x0b, 0x96);
4093 mdelay(100);
4094 em28xx_write_reg(dev, 0x0b, 0x82);
4095 mdelay(100);
4096 }
4097 }
4098
4099 request_modules(dev);
4100
4101 /*
4102 * Do it at the end, to reduce dynamic configuration changes during
4103 * the device init. Yet, as request_modules() can be async, the
4104 * topology will likely change after the load of the em28xx subdrivers.
4105 */
4106 #ifdef CONFIG_MEDIA_CONTROLLER
4107 retval = media_device_register(dev->media_dev);
4108 #endif
4109
4110 return 0;
4111
4112 err_free:
4113 kfree(dev->alt_max_pkt_size_isoc);
4114 kfree(dev);
4115
4116 err:
4117 clear_bit(nr, em28xx_devused);
4118
4119 err_no_slot:
4120 usb_put_dev(udev);
4121 return retval;
4122 }
4123
4124 /*
4125 * em28xx_usb_disconnect()
4126 * called when the device gets disconnected
4127 * video device will be unregistered on v4l2_close in case it is still open
4128 */
em28xx_usb_disconnect(struct usb_interface * intf)4129 static void em28xx_usb_disconnect(struct usb_interface *intf)
4130 {
4131 struct em28xx *dev;
4132
4133 dev = usb_get_intfdata(intf);
4134 usb_set_intfdata(intf, NULL);
4135
4136 if (!dev)
4137 return;
4138
4139 if (dev->dev_next) {
4140 dev->dev_next->disconnected = 1;
4141 dev_info(&dev->intf->dev, "Disconnecting %s\n",
4142 dev->dev_next->name);
4143 }
4144
4145 dev->disconnected = 1;
4146
4147 dev_info(&dev->intf->dev, "Disconnecting %s\n", dev->name);
4148
4149 flush_request_modules(dev);
4150
4151 em28xx_close_extension(dev);
4152
4153 if (dev->dev_next)
4154 em28xx_release_resources(dev->dev_next);
4155 em28xx_release_resources(dev);
4156
4157 if (dev->dev_next) {
4158 kref_put(&dev->dev_next->ref, em28xx_free_device);
4159 dev->dev_next = NULL;
4160 }
4161 kref_put(&dev->ref, em28xx_free_device);
4162 }
4163
em28xx_usb_suspend(struct usb_interface * intf,pm_message_t message)4164 static int em28xx_usb_suspend(struct usb_interface *intf,
4165 pm_message_t message)
4166 {
4167 struct em28xx *dev;
4168
4169 dev = usb_get_intfdata(intf);
4170 if (!dev)
4171 return 0;
4172 em28xx_suspend_extension(dev);
4173 return 0;
4174 }
4175
em28xx_usb_resume(struct usb_interface * intf)4176 static int em28xx_usb_resume(struct usb_interface *intf)
4177 {
4178 struct em28xx *dev;
4179
4180 dev = usb_get_intfdata(intf);
4181 if (!dev)
4182 return 0;
4183 em28xx_resume_extension(dev);
4184 return 0;
4185 }
4186
4187 static struct usb_driver em28xx_usb_driver = {
4188 .name = "em28xx",
4189 .probe = em28xx_usb_probe,
4190 .disconnect = em28xx_usb_disconnect,
4191 .suspend = em28xx_usb_suspend,
4192 .resume = em28xx_usb_resume,
4193 .reset_resume = em28xx_usb_resume,
4194 .id_table = em28xx_id_table,
4195 };
4196
4197 module_usb_driver(em28xx_usb_driver);
4198