1 /*
2 * Copyright (C) 2001-2004 by David Brownell
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18
19 /* this file is part of ehci-hcd.c */
20
21 /*-------------------------------------------------------------------------*/
22
23 /*
24 * EHCI Root Hub ... the nonsharable stuff
25 *
26 * Registers don't need cpu_to_le32, that happens transparently
27 */
28
29 /*-------------------------------------------------------------------------*/
30
31 #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
32
33 #ifdef CONFIG_PM
34
35 static int ehci_hub_control(
36 struct usb_hcd *hcd,
37 u16 typeReq,
38 u16 wValue,
39 u16 wIndex,
40 char *buf,
41 u16 wLength
42 );
43
44 /* After a power loss, ports that were owned by the companion must be
45 * reset so that the companion can still own them.
46 */
ehci_handover_companion_ports(struct ehci_hcd * ehci)47 static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
48 {
49 u32 __iomem *reg;
50 u32 status;
51 int port;
52 __le32 buf;
53 struct usb_hcd *hcd = ehci_to_hcd(ehci);
54
55 if (!ehci->owned_ports)
56 return;
57
58 /* Give the connections some time to appear */
59 msleep(20);
60
61 port = HCS_N_PORTS(ehci->hcs_params);
62 while (port--) {
63 if (test_bit(port, &ehci->owned_ports)) {
64 reg = &ehci->regs->port_status[port];
65 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
66
67 /* Port already owned by companion? */
68 if (status & PORT_OWNER)
69 clear_bit(port, &ehci->owned_ports);
70 else if (test_bit(port, &ehci->companion_ports))
71 ehci_writel(ehci, status & ~PORT_PE, reg);
72 else
73 ehci_hub_control(hcd, SetPortFeature,
74 USB_PORT_FEAT_RESET, port + 1,
75 NULL, 0);
76 }
77 }
78
79 if (!ehci->owned_ports)
80 return;
81 msleep(90); /* Wait for resets to complete */
82
83 port = HCS_N_PORTS(ehci->hcs_params);
84 while (port--) {
85 if (test_bit(port, &ehci->owned_ports)) {
86 ehci_hub_control(hcd, GetPortStatus,
87 0, port + 1,
88 (char *) &buf, sizeof(buf));
89
90 /* The companion should now own the port,
91 * but if something went wrong the port must not
92 * remain enabled.
93 */
94 reg = &ehci->regs->port_status[port];
95 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
96 if (status & PORT_OWNER)
97 ehci_writel(ehci, status | PORT_CSC, reg);
98 else {
99 ehci_dbg(ehci, "failed handover port %d: %x\n",
100 port + 1, status);
101 ehci_writel(ehci, status & ~PORT_PE, reg);
102 }
103 }
104 }
105
106 ehci->owned_ports = 0;
107 }
108
ehci_port_change(struct ehci_hcd * ehci)109 static int ehci_port_change(struct ehci_hcd *ehci)
110 {
111 int i = HCS_N_PORTS(ehci->hcs_params);
112
113 /* First check if the controller indicates a change event */
114
115 if (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)
116 return 1;
117
118 /*
119 * Not all controllers appear to update this while going from D3 to D0,
120 * so check the individual port status registers as well
121 */
122
123 while (i--)
124 if (ehci_readl(ehci, &ehci->regs->port_status[i]) & PORT_CSC)
125 return 1;
126
127 return 0;
128 }
129
ehci_adjust_port_wakeup_flags(struct ehci_hcd * ehci,bool suspending,bool do_wakeup)130 static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
131 bool suspending, bool do_wakeup)
132 {
133 int port;
134 u32 temp;
135 unsigned long flags;
136
137 /* If remote wakeup is enabled for the root hub but disabled
138 * for the controller, we must adjust all the port wakeup flags
139 * when the controller is suspended or resumed. In all other
140 * cases they don't need to be changed.
141 */
142 if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
143 return;
144
145 spin_lock_irqsave(&ehci->lock, flags);
146
147 /* clear phy low-power mode before changing wakeup flags */
148 if (ehci->has_hostpc) {
149 port = HCS_N_PORTS(ehci->hcs_params);
150 while (port--) {
151 u32 __iomem *hostpc_reg;
152
153 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
154 + HOSTPC0 + 4 * port);
155 temp = ehci_readl(ehci, hostpc_reg);
156 ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
157 }
158 spin_unlock_irqrestore(&ehci->lock, flags);
159 msleep(5);
160 spin_lock_irqsave(&ehci->lock, flags);
161 }
162
163 port = HCS_N_PORTS(ehci->hcs_params);
164 while (port--) {
165 u32 __iomem *reg = &ehci->regs->port_status[port];
166 u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
167 u32 t2 = t1 & ~PORT_WAKE_BITS;
168
169 /* If we are suspending the controller, clear the flags.
170 * If we are resuming the controller, set the wakeup flags.
171 */
172 if (!suspending) {
173 if (t1 & PORT_CONNECT)
174 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
175 else
176 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
177 }
178 ehci_vdbg(ehci, "port %d, %08x -> %08x\n",
179 port + 1, t1, t2);
180 ehci_writel(ehci, t2, reg);
181 }
182
183 /* enter phy low-power mode again */
184 if (ehci->has_hostpc) {
185 port = HCS_N_PORTS(ehci->hcs_params);
186 while (port--) {
187 u32 __iomem *hostpc_reg;
188
189 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
190 + HOSTPC0 + 4 * port);
191 temp = ehci_readl(ehci, hostpc_reg);
192 ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
193 }
194 }
195
196 /* Does the root hub have a port wakeup pending? */
197 if (!suspending && ehci_port_change(ehci))
198 usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
199
200 spin_unlock_irqrestore(&ehci->lock, flags);
201 }
202
ehci_bus_suspend(struct usb_hcd * hcd)203 static int ehci_bus_suspend (struct usb_hcd *hcd)
204 {
205 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
206 int port;
207 int mask;
208 int changed;
209
210 ehci_dbg(ehci, "suspend root hub\n");
211
212 if (time_before (jiffies, ehci->next_statechange))
213 msleep(5);
214 del_timer_sync(&ehci->watchdog);
215 del_timer_sync(&ehci->iaa_watchdog);
216
217 spin_lock_irq (&ehci->lock);
218
219 /* Once the controller is stopped, port resumes that are already
220 * in progress won't complete. Hence if remote wakeup is enabled
221 * for the root hub and any ports are in the middle of a resume or
222 * remote wakeup, we must fail the suspend.
223 */
224 if (hcd->self.root_hub->do_remote_wakeup) {
225 port = HCS_N_PORTS(ehci->hcs_params);
226 while (port--) {
227 if (ehci->reset_done[port] != 0) {
228 spin_unlock_irq(&ehci->lock);
229 ehci_dbg(ehci, "suspend failed because "
230 "port %d is resuming\n",
231 port + 1);
232 return -EBUSY;
233 }
234 }
235 }
236
237 /* stop schedules, clean any completed work */
238 if (HC_IS_RUNNING(hcd->state)) {
239 ehci_quiesce (ehci);
240 hcd->state = HC_STATE_QUIESCING;
241 }
242 ehci->command = ehci_readl(ehci, &ehci->regs->command);
243 ehci_work(ehci);
244
245 /* Unlike other USB host controller types, EHCI doesn't have
246 * any notion of "global" or bus-wide suspend. The driver has
247 * to manually suspend all the active unsuspended ports, and
248 * then manually resume them in the bus_resume() routine.
249 */
250 ehci->bus_suspended = 0;
251 ehci->owned_ports = 0;
252 changed = 0;
253 port = HCS_N_PORTS(ehci->hcs_params);
254 while (port--) {
255 u32 __iomem *reg = &ehci->regs->port_status [port];
256 u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
257 u32 t2 = t1 & ~PORT_WAKE_BITS;
258
259 /* keep track of which ports we suspend */
260 if (t1 & PORT_OWNER)
261 set_bit(port, &ehci->owned_ports);
262 else if ((t1 & PORT_PE) && !(t1 & PORT_SUSPEND)) {
263 t2 |= PORT_SUSPEND;
264 set_bit(port, &ehci->bus_suspended);
265 }
266
267 /* enable remote wakeup on all ports, if told to do so */
268 if (hcd->self.root_hub->do_remote_wakeup) {
269 /* only enable appropriate wake bits, otherwise the
270 * hardware can not go phy low power mode. If a race
271 * condition happens here(connection change during bits
272 * set), the port change detection will finally fix it.
273 */
274 if (t1 & PORT_CONNECT)
275 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
276 else
277 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
278 }
279
280 if (t1 != t2) {
281 ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
282 port + 1, t1, t2);
283 ehci_writel(ehci, t2, reg);
284 changed = 1;
285 }
286 }
287
288 if (changed && ehci->has_hostpc) {
289 spin_unlock_irq(&ehci->lock);
290 msleep(5); /* 5 ms for HCD to enter low-power mode */
291 spin_lock_irq(&ehci->lock);
292
293 port = HCS_N_PORTS(ehci->hcs_params);
294 while (port--) {
295 u32 __iomem *hostpc_reg;
296 u32 t3;
297
298 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
299 + HOSTPC0 + 4 * port);
300 t3 = ehci_readl(ehci, hostpc_reg);
301 ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
302 t3 = ehci_readl(ehci, hostpc_reg);
303 ehci_dbg(ehci, "Port %d phy low-power mode %s\n",
304 port, (t3 & HOSTPC_PHCD) ?
305 "succeeded" : "failed");
306 }
307 }
308
309 /* Apparently some devices need a >= 1-uframe delay here */
310 if (ehci->bus_suspended)
311 udelay(150);
312
313 /* turn off now-idle HC */
314 ehci_halt (ehci);
315 hcd->state = HC_STATE_SUSPENDED;
316
317 if (ehci->reclaim)
318 end_unlink_async(ehci);
319
320 /* allow remote wakeup */
321 mask = INTR_MASK;
322 if (!hcd->self.root_hub->do_remote_wakeup)
323 mask &= ~STS_PCD;
324 ehci_writel(ehci, mask, &ehci->regs->intr_enable);
325 ehci_readl(ehci, &ehci->regs->intr_enable);
326
327 ehci->next_statechange = jiffies + msecs_to_jiffies(10);
328 spin_unlock_irq (&ehci->lock);
329
330 /* ehci_work() may have re-enabled the watchdog timer, which we do not
331 * want, and so we must delete any pending watchdog timer events.
332 */
333 del_timer_sync(&ehci->watchdog);
334 return 0;
335 }
336
337
338 /* caller has locked the root hub, and should reset/reinit on error */
ehci_bus_resume(struct usb_hcd * hcd)339 static int ehci_bus_resume (struct usb_hcd *hcd)
340 {
341 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
342 u32 temp;
343 u32 power_okay;
344 int i;
345 u8 resume_needed = 0;
346
347 if (time_before (jiffies, ehci->next_statechange))
348 msleep(5);
349 spin_lock_irq (&ehci->lock);
350 if (!HCD_HW_ACCESSIBLE(hcd)) {
351 spin_unlock_irq(&ehci->lock);
352 return -ESHUTDOWN;
353 }
354
355 if (unlikely(ehci->debug)) {
356 if (!dbgp_reset_prep())
357 ehci->debug = NULL;
358 else
359 dbgp_external_startup();
360 }
361
362 /* Ideally and we've got a real resume here, and no port's power
363 * was lost. (For PCI, that means Vaux was maintained.) But we
364 * could instead be restoring a swsusp snapshot -- so that BIOS was
365 * the last user of the controller, not reset/pm hardware keeping
366 * state we gave to it.
367 */
368 power_okay = ehci_readl(ehci, &ehci->regs->intr_enable);
369 ehci_dbg(ehci, "resume root hub%s\n",
370 power_okay ? "" : " after power loss");
371
372 /* at least some APM implementations will try to deliver
373 * IRQs right away, so delay them until we're ready.
374 */
375 ehci_writel(ehci, 0, &ehci->regs->intr_enable);
376
377 /* re-init operational registers */
378 ehci_writel(ehci, 0, &ehci->regs->segment);
379 ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
380 ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
381
382 /* restore CMD_RUN, framelist size, and irq threshold */
383 ehci_writel(ehci, ehci->command, &ehci->regs->command);
384
385 /* Some controller/firmware combinations need a delay during which
386 * they set up the port statuses. See Bugzilla #8190. */
387 spin_unlock_irq(&ehci->lock);
388 msleep(8);
389 spin_lock_irq(&ehci->lock);
390
391 /* clear phy low-power mode before resume */
392 if (ehci->bus_suspended && ehci->has_hostpc) {
393 i = HCS_N_PORTS(ehci->hcs_params);
394 while (i--) {
395 if (test_bit(i, &ehci->bus_suspended)) {
396 u32 __iomem *hostpc_reg;
397
398 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
399 + HOSTPC0 + 4 * i);
400 temp = ehci_readl(ehci, hostpc_reg);
401 ehci_writel(ehci, temp & ~HOSTPC_PHCD,
402 hostpc_reg);
403 }
404 }
405 spin_unlock_irq(&ehci->lock);
406 msleep(5);
407 spin_lock_irq(&ehci->lock);
408 }
409
410 /* manually resume the ports we suspended during bus_suspend() */
411 i = HCS_N_PORTS (ehci->hcs_params);
412 while (i--) {
413 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
414 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
415 if (test_bit(i, &ehci->bus_suspended) &&
416 (temp & PORT_SUSPEND)) {
417 temp |= PORT_RESUME;
418 resume_needed = 1;
419 }
420 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
421 }
422
423 /* msleep for 20ms only if code is trying to resume port */
424 if (resume_needed) {
425 spin_unlock_irq(&ehci->lock);
426 msleep(20);
427 spin_lock_irq(&ehci->lock);
428 }
429
430 i = HCS_N_PORTS (ehci->hcs_params);
431 while (i--) {
432 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
433 if (test_bit(i, &ehci->bus_suspended) &&
434 (temp & PORT_SUSPEND)) {
435 temp &= ~(PORT_RWC_BITS | PORT_RESUME);
436 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
437 ehci_vdbg (ehci, "resumed port %d\n", i + 1);
438 }
439 }
440 (void) ehci_readl(ehci, &ehci->regs->command);
441
442 /* maybe re-activate the schedule(s) */
443 temp = 0;
444 if (ehci->async->qh_next.qh)
445 temp |= CMD_ASE;
446 if (ehci->periodic_sched)
447 temp |= CMD_PSE;
448 if (temp) {
449 ehci->command |= temp;
450 ehci_writel(ehci, ehci->command, &ehci->regs->command);
451 }
452
453 ehci->next_statechange = jiffies + msecs_to_jiffies(5);
454 hcd->state = HC_STATE_RUNNING;
455
456 /* Now we can safely re-enable irqs */
457 ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
458
459 spin_unlock_irq (&ehci->lock);
460 ehci_handover_companion_ports(ehci);
461 return 0;
462 }
463
464 #else
465
466 #define ehci_bus_suspend NULL
467 #define ehci_bus_resume NULL
468
469 #endif /* CONFIG_PM */
470
471 /*-------------------------------------------------------------------------*/
472
473 /* Display the ports dedicated to the companion controller */
show_companion(struct device * dev,struct device_attribute * attr,char * buf)474 static ssize_t show_companion(struct device *dev,
475 struct device_attribute *attr,
476 char *buf)
477 {
478 struct ehci_hcd *ehci;
479 int nports, index, n;
480 int count = PAGE_SIZE;
481 char *ptr = buf;
482
483 ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
484 nports = HCS_N_PORTS(ehci->hcs_params);
485
486 for (index = 0; index < nports; ++index) {
487 if (test_bit(index, &ehci->companion_ports)) {
488 n = scnprintf(ptr, count, "%d\n", index + 1);
489 ptr += n;
490 count -= n;
491 }
492 }
493 return ptr - buf;
494 }
495
496 /*
497 * Sets the owner of a port
498 */
set_owner(struct ehci_hcd * ehci,int portnum,int new_owner)499 static void set_owner(struct ehci_hcd *ehci, int portnum, int new_owner)
500 {
501 u32 __iomem *status_reg;
502 u32 port_status;
503 int try;
504
505 status_reg = &ehci->regs->port_status[portnum];
506
507 /*
508 * The controller won't set the OWNER bit if the port is
509 * enabled, so this loop will sometimes require at least two
510 * iterations: one to disable the port and one to set OWNER.
511 */
512 for (try = 4; try > 0; --try) {
513 spin_lock_irq(&ehci->lock);
514 port_status = ehci_readl(ehci, status_reg);
515 if ((port_status & PORT_OWNER) == new_owner
516 || (port_status & (PORT_OWNER | PORT_CONNECT))
517 == 0)
518 try = 0;
519 else {
520 port_status ^= PORT_OWNER;
521 port_status &= ~(PORT_PE | PORT_RWC_BITS);
522 ehci_writel(ehci, port_status, status_reg);
523 }
524 spin_unlock_irq(&ehci->lock);
525 if (try > 1)
526 msleep(5);
527 }
528 }
529
530 /*
531 * Dedicate or undedicate a port to the companion controller.
532 * Syntax is "[-]portnum", where a leading '-' sign means
533 * return control of the port to the EHCI controller.
534 */
store_companion(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)535 static ssize_t store_companion(struct device *dev,
536 struct device_attribute *attr,
537 const char *buf, size_t count)
538 {
539 struct ehci_hcd *ehci;
540 int portnum, new_owner;
541
542 ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
543 new_owner = PORT_OWNER; /* Owned by companion */
544 if (sscanf(buf, "%d", &portnum) != 1)
545 return -EINVAL;
546 if (portnum < 0) {
547 portnum = - portnum;
548 new_owner = 0; /* Owned by EHCI */
549 }
550 if (portnum <= 0 || portnum > HCS_N_PORTS(ehci->hcs_params))
551 return -ENOENT;
552 portnum--;
553 if (new_owner)
554 set_bit(portnum, &ehci->companion_ports);
555 else
556 clear_bit(portnum, &ehci->companion_ports);
557 set_owner(ehci, portnum, new_owner);
558 return count;
559 }
560 static DEVICE_ATTR(companion, 0644, show_companion, store_companion);
561
create_companion_file(struct ehci_hcd * ehci)562 static inline int create_companion_file(struct ehci_hcd *ehci)
563 {
564 int i = 0;
565
566 /* with integrated TT there is no companion! */
567 if (!ehci_is_TDI(ehci))
568 i = device_create_file(ehci_to_hcd(ehci)->self.controller,
569 &dev_attr_companion);
570 return i;
571 }
572
remove_companion_file(struct ehci_hcd * ehci)573 static inline void remove_companion_file(struct ehci_hcd *ehci)
574 {
575 /* with integrated TT there is no companion! */
576 if (!ehci_is_TDI(ehci))
577 device_remove_file(ehci_to_hcd(ehci)->self.controller,
578 &dev_attr_companion);
579 }
580
581
582 /*-------------------------------------------------------------------------*/
583
check_reset_complete(struct ehci_hcd * ehci,int index,u32 __iomem * status_reg,int port_status)584 static int check_reset_complete (
585 struct ehci_hcd *ehci,
586 int index,
587 u32 __iomem *status_reg,
588 int port_status
589 ) {
590 if (!(port_status & PORT_CONNECT))
591 return port_status;
592
593 /* if reset finished and it's still not enabled -- handoff */
594 if (!(port_status & PORT_PE)) {
595
596 /* with integrated TT, there's nobody to hand it to! */
597 if (ehci_is_TDI(ehci)) {
598 ehci_dbg (ehci,
599 "Failed to enable port %d on root hub TT\n",
600 index+1);
601 return port_status;
602 }
603
604 ehci_dbg (ehci, "port %d full speed --> companion\n",
605 index + 1);
606
607 // what happens if HCS_N_CC(params) == 0 ?
608 port_status |= PORT_OWNER;
609 port_status &= ~PORT_RWC_BITS;
610 ehci_writel(ehci, port_status, status_reg);
611
612 /* ensure 440EPX ohci controller state is operational */
613 if (ehci->has_amcc_usb23)
614 set_ohci_hcfs(ehci, 1);
615 } else {
616 ehci_dbg (ehci, "port %d high speed\n", index + 1);
617 /* ensure 440EPx ohci controller state is suspended */
618 if (ehci->has_amcc_usb23)
619 set_ohci_hcfs(ehci, 0);
620 }
621
622 return port_status;
623 }
624
625 /*-------------------------------------------------------------------------*/
626
627
628 /* build "status change" packet (one or two bytes) from HC registers */
629
630 static int
ehci_hub_status_data(struct usb_hcd * hcd,char * buf)631 ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
632 {
633 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
634 u32 temp, status = 0;
635 u32 mask;
636 int ports, i, retval = 1;
637 unsigned long flags;
638 u32 ppcd = 0;
639
640 /* if !USB_SUSPEND, root hub timers won't get shut down ... */
641 if (!HC_IS_RUNNING(hcd->state))
642 return 0;
643
644 /* init status to no-changes */
645 buf [0] = 0;
646 ports = HCS_N_PORTS (ehci->hcs_params);
647 if (ports > 7) {
648 buf [1] = 0;
649 retval++;
650 }
651
652 /* Some boards (mostly VIA?) report bogus overcurrent indications,
653 * causing massive log spam unless we completely ignore them. It
654 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
655 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
656 * PORT_POWER; that's surprising, but maybe within-spec.
657 */
658 if (!ignore_oc)
659 mask = PORT_CSC | PORT_PEC | PORT_OCC;
660 else
661 mask = PORT_CSC | PORT_PEC;
662 // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
663
664 /* no hub change reports (bit 0) for now (power, ...) */
665
666 /* port N changes (bit N)? */
667 spin_lock_irqsave (&ehci->lock, flags);
668
669 /* get per-port change detect bits */
670 if (ehci->has_ppcd)
671 ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16;
672
673 for (i = 0; i < ports; i++) {
674 /* leverage per-port change bits feature */
675 if (ehci->has_ppcd && !(ppcd & (1 << i)))
676 continue;
677 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
678
679 /*
680 * Return status information even for ports with OWNER set.
681 * Otherwise khubd wouldn't see the disconnect event when a
682 * high-speed device is switched over to the companion
683 * controller by the user.
684 */
685
686 if ((temp & mask) != 0 || test_bit(i, &ehci->port_c_suspend)
687 || (ehci->reset_done[i] && time_after_eq(
688 jiffies, ehci->reset_done[i]))) {
689 if (i < 7)
690 buf [0] |= 1 << (i + 1);
691 else
692 buf [1] |= 1 << (i - 7);
693 status = STS_PCD;
694 }
695 }
696 /* FIXME autosuspend idle root hubs */
697 spin_unlock_irqrestore (&ehci->lock, flags);
698 return status ? retval : 0;
699 }
700
701 /*-------------------------------------------------------------------------*/
702
703 static void
ehci_hub_descriptor(struct ehci_hcd * ehci,struct usb_hub_descriptor * desc)704 ehci_hub_descriptor (
705 struct ehci_hcd *ehci,
706 struct usb_hub_descriptor *desc
707 ) {
708 int ports = HCS_N_PORTS (ehci->hcs_params);
709 u16 temp;
710
711 desc->bDescriptorType = 0x29;
712 desc->bPwrOn2PwrGood = 10; /* ehci 1.0, 2.3.9 says 20ms max */
713 desc->bHubContrCurrent = 0;
714
715 desc->bNbrPorts = ports;
716 temp = 1 + (ports / 8);
717 desc->bDescLength = 7 + 2 * temp;
718
719 /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
720 memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
721 memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
722
723 temp = 0x0008; /* per-port overcurrent reporting */
724 if (HCS_PPC (ehci->hcs_params))
725 temp |= 0x0001; /* per-port power control */
726 else
727 temp |= 0x0002; /* no power switching */
728 #if 0
729 // re-enable when we support USB_PORT_FEAT_INDICATOR below.
730 if (HCS_INDICATOR (ehci->hcs_params))
731 temp |= 0x0080; /* per-port indicators (LEDs) */
732 #endif
733 desc->wHubCharacteristics = cpu_to_le16(temp);
734 }
735
736 /*-------------------------------------------------------------------------*/
737
ehci_hub_control(struct usb_hcd * hcd,u16 typeReq,u16 wValue,u16 wIndex,char * buf,u16 wLength)738 static int ehci_hub_control (
739 struct usb_hcd *hcd,
740 u16 typeReq,
741 u16 wValue,
742 u16 wIndex,
743 char *buf,
744 u16 wLength
745 ) {
746 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
747 int ports = HCS_N_PORTS (ehci->hcs_params);
748 u32 __iomem *status_reg = &ehci->regs->port_status[
749 (wIndex & 0xff) - 1];
750 u32 __iomem *hostpc_reg = NULL;
751 u32 temp, temp1, status;
752 unsigned long flags;
753 int retval = 0;
754 unsigned selector;
755
756 /*
757 * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
758 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
759 * (track current state ourselves) ... blink for diagnostics,
760 * power, "this is the one", etc. EHCI spec supports this.
761 */
762
763 if (ehci->has_hostpc)
764 hostpc_reg = (u32 __iomem *)((u8 *)ehci->regs
765 + HOSTPC0 + 4 * ((wIndex & 0xff) - 1));
766 spin_lock_irqsave (&ehci->lock, flags);
767 switch (typeReq) {
768 case ClearHubFeature:
769 switch (wValue) {
770 case C_HUB_LOCAL_POWER:
771 case C_HUB_OVER_CURRENT:
772 /* no hub-wide feature/status flags */
773 break;
774 default:
775 goto error;
776 }
777 break;
778 case ClearPortFeature:
779 if (!wIndex || wIndex > ports)
780 goto error;
781 wIndex--;
782 temp = ehci_readl(ehci, status_reg);
783
784 /*
785 * Even if OWNER is set, so the port is owned by the
786 * companion controller, khubd needs to be able to clear
787 * the port-change status bits (especially
788 * USB_PORT_STAT_C_CONNECTION).
789 */
790
791 switch (wValue) {
792 case USB_PORT_FEAT_ENABLE:
793 ehci_writel(ehci, temp & ~PORT_PE, status_reg);
794 break;
795 case USB_PORT_FEAT_C_ENABLE:
796 ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC,
797 status_reg);
798 break;
799 case USB_PORT_FEAT_SUSPEND:
800 if (temp & PORT_RESET)
801 goto error;
802 if (ehci->no_selective_suspend)
803 break;
804 if (!(temp & PORT_SUSPEND))
805 break;
806 if ((temp & PORT_PE) == 0)
807 goto error;
808
809 /* clear phy low-power mode before resume */
810 if (hostpc_reg) {
811 temp1 = ehci_readl(ehci, hostpc_reg);
812 ehci_writel(ehci, temp1 & ~HOSTPC_PHCD,
813 hostpc_reg);
814 spin_unlock_irqrestore(&ehci->lock, flags);
815 msleep(5);/* wait to leave low-power mode */
816 spin_lock_irqsave(&ehci->lock, flags);
817 }
818 /* resume signaling for 20 msec */
819 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
820 ehci_writel(ehci, temp | PORT_RESUME, status_reg);
821 ehci->reset_done[wIndex] = jiffies
822 + msecs_to_jiffies(20);
823 break;
824 case USB_PORT_FEAT_C_SUSPEND:
825 clear_bit(wIndex, &ehci->port_c_suspend);
826 break;
827 case USB_PORT_FEAT_POWER:
828 if (HCS_PPC (ehci->hcs_params))
829 ehci_writel(ehci,
830 temp & ~(PORT_RWC_BITS | PORT_POWER),
831 status_reg);
832 break;
833 case USB_PORT_FEAT_C_CONNECTION:
834 if (ehci->has_lpm) {
835 /* clear PORTSC bits on disconnect */
836 temp &= ~PORT_LPM;
837 temp &= ~PORT_DEV_ADDR;
838 }
839 ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
840 status_reg);
841 break;
842 case USB_PORT_FEAT_C_OVER_CURRENT:
843 ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC,
844 status_reg);
845 break;
846 case USB_PORT_FEAT_C_RESET:
847 /* GetPortStatus clears reset */
848 break;
849 default:
850 goto error;
851 }
852 ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
853 break;
854 case GetHubDescriptor:
855 ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
856 buf);
857 break;
858 case GetHubStatus:
859 /* no hub-wide feature/status flags */
860 memset (buf, 0, 4);
861 //cpu_to_le32s ((u32 *) buf);
862 break;
863 case GetPortStatus:
864 if (!wIndex || wIndex > ports)
865 goto error;
866 wIndex--;
867 status = 0;
868 temp = ehci_readl(ehci, status_reg);
869
870 // wPortChange bits
871 if (temp & PORT_CSC)
872 status |= USB_PORT_STAT_C_CONNECTION << 16;
873 if (temp & PORT_PEC)
874 status |= USB_PORT_STAT_C_ENABLE << 16;
875
876 if ((temp & PORT_OCC) && !ignore_oc){
877 status |= USB_PORT_STAT_C_OVERCURRENT << 16;
878
879 /*
880 * Hubs should disable port power on over-current.
881 * However, not all EHCI implementations do this
882 * automatically, even if they _do_ support per-port
883 * power switching; they're allowed to just limit the
884 * current. khubd will turn the power back on.
885 */
886 if (HCS_PPC (ehci->hcs_params)){
887 ehci_writel(ehci,
888 temp & ~(PORT_RWC_BITS | PORT_POWER),
889 status_reg);
890 }
891 }
892
893 /* whoever resumes must GetPortStatus to complete it!! */
894 if (temp & PORT_RESUME) {
895
896 /* Remote Wakeup received? */
897 if (!ehci->reset_done[wIndex]) {
898 /* resume signaling for 20 msec */
899 ehci->reset_done[wIndex] = jiffies
900 + msecs_to_jiffies(20);
901 /* check the port again */
902 mod_timer(&ehci_to_hcd(ehci)->rh_timer,
903 ehci->reset_done[wIndex]);
904 }
905
906 /* resume completed? */
907 else if (time_after_eq(jiffies,
908 ehci->reset_done[wIndex])) {
909 clear_bit(wIndex, &ehci->suspended_ports);
910 set_bit(wIndex, &ehci->port_c_suspend);
911 ehci->reset_done[wIndex] = 0;
912
913 /* stop resume signaling */
914 temp = ehci_readl(ehci, status_reg);
915 ehci_writel(ehci,
916 temp & ~(PORT_RWC_BITS | PORT_RESUME),
917 status_reg);
918 retval = handshake(ehci, status_reg,
919 PORT_RESUME, 0, 2000 /* 2msec */);
920 if (retval != 0) {
921 ehci_err(ehci,
922 "port %d resume error %d\n",
923 wIndex + 1, retval);
924 goto error;
925 }
926 temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
927 }
928 }
929
930 /* whoever resets must GetPortStatus to complete it!! */
931 if ((temp & PORT_RESET)
932 && time_after_eq(jiffies,
933 ehci->reset_done[wIndex])) {
934 status |= USB_PORT_STAT_C_RESET << 16;
935 ehci->reset_done [wIndex] = 0;
936
937 /* force reset to complete */
938 ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
939 status_reg);
940 /* REVISIT: some hardware needs 550+ usec to clear
941 * this bit; seems too long to spin routinely...
942 */
943 retval = handshake(ehci, status_reg,
944 PORT_RESET, 0, 1000);
945 if (retval != 0) {
946 ehci_err (ehci, "port %d reset error %d\n",
947 wIndex + 1, retval);
948 goto error;
949 }
950
951 /* see what we found out */
952 temp = check_reset_complete (ehci, wIndex, status_reg,
953 ehci_readl(ehci, status_reg));
954 }
955
956 if (!(temp & (PORT_RESUME|PORT_RESET)))
957 ehci->reset_done[wIndex] = 0;
958
959 /* transfer dedicated ports to the companion hc */
960 if ((temp & PORT_CONNECT) &&
961 test_bit(wIndex, &ehci->companion_ports)) {
962 temp &= ~PORT_RWC_BITS;
963 temp |= PORT_OWNER;
964 ehci_writel(ehci, temp, status_reg);
965 ehci_dbg(ehci, "port %d --> companion\n", wIndex + 1);
966 temp = ehci_readl(ehci, status_reg);
967 }
968
969 /*
970 * Even if OWNER is set, there's no harm letting khubd
971 * see the wPortStatus values (they should all be 0 except
972 * for PORT_POWER anyway).
973 */
974
975 if (temp & PORT_CONNECT) {
976 status |= USB_PORT_STAT_CONNECTION;
977 // status may be from integrated TT
978 if (ehci->has_hostpc) {
979 temp1 = ehci_readl(ehci, hostpc_reg);
980 status |= ehci_port_speed(ehci, temp1);
981 } else
982 status |= ehci_port_speed(ehci, temp);
983 }
984 if (temp & PORT_PE)
985 status |= USB_PORT_STAT_ENABLE;
986
987 /* maybe the port was unsuspended without our knowledge */
988 if (temp & (PORT_SUSPEND|PORT_RESUME)) {
989 status |= USB_PORT_STAT_SUSPEND;
990 } else if (test_bit(wIndex, &ehci->suspended_ports)) {
991 clear_bit(wIndex, &ehci->suspended_ports);
992 ehci->reset_done[wIndex] = 0;
993 if (temp & PORT_PE)
994 set_bit(wIndex, &ehci->port_c_suspend);
995 }
996
997 if (temp & PORT_OC)
998 status |= USB_PORT_STAT_OVERCURRENT;
999 if (temp & PORT_RESET)
1000 status |= USB_PORT_STAT_RESET;
1001 if (temp & PORT_POWER)
1002 status |= USB_PORT_STAT_POWER;
1003 if (test_bit(wIndex, &ehci->port_c_suspend))
1004 status |= USB_PORT_STAT_C_SUSPEND << 16;
1005
1006 #ifndef VERBOSE_DEBUG
1007 if (status & ~0xffff) /* only if wPortChange is interesting */
1008 #endif
1009 dbg_port (ehci, "GetStatus", wIndex + 1, temp);
1010 put_unaligned_le32(status, buf);
1011 break;
1012 case SetHubFeature:
1013 switch (wValue) {
1014 case C_HUB_LOCAL_POWER:
1015 case C_HUB_OVER_CURRENT:
1016 /* no hub-wide feature/status flags */
1017 break;
1018 default:
1019 goto error;
1020 }
1021 break;
1022 case SetPortFeature:
1023 selector = wIndex >> 8;
1024 wIndex &= 0xff;
1025 if (unlikely(ehci->debug)) {
1026 /* If the debug port is active any port
1027 * feature requests should get denied */
1028 if (wIndex == HCS_DEBUG_PORT(ehci->hcs_params) &&
1029 (readl(&ehci->debug->control) & DBGP_ENABLED)) {
1030 retval = -ENODEV;
1031 goto error_exit;
1032 }
1033 }
1034 if (!wIndex || wIndex > ports)
1035 goto error;
1036 wIndex--;
1037 temp = ehci_readl(ehci, status_reg);
1038 if (temp & PORT_OWNER)
1039 break;
1040
1041 temp &= ~PORT_RWC_BITS;
1042 switch (wValue) {
1043 case USB_PORT_FEAT_SUSPEND:
1044 if (ehci->no_selective_suspend)
1045 break;
1046 if ((temp & PORT_PE) == 0
1047 || (temp & PORT_RESET) != 0)
1048 goto error;
1049
1050 /* After above check the port must be connected.
1051 * Set appropriate bit thus could put phy into low power
1052 * mode if we have hostpc feature
1053 */
1054 temp &= ~PORT_WKCONN_E;
1055 temp |= PORT_WKDISC_E | PORT_WKOC_E;
1056 ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
1057 if (hostpc_reg) {
1058 spin_unlock_irqrestore(&ehci->lock, flags);
1059 msleep(5);/* 5ms for HCD enter low pwr mode */
1060 spin_lock_irqsave(&ehci->lock, flags);
1061 temp1 = ehci_readl(ehci, hostpc_reg);
1062 ehci_writel(ehci, temp1 | HOSTPC_PHCD,
1063 hostpc_reg);
1064 temp1 = ehci_readl(ehci, hostpc_reg);
1065 ehci_dbg(ehci, "Port%d phy low pwr mode %s\n",
1066 wIndex, (temp1 & HOSTPC_PHCD) ?
1067 "succeeded" : "failed");
1068 }
1069 set_bit(wIndex, &ehci->suspended_ports);
1070 break;
1071 case USB_PORT_FEAT_POWER:
1072 if (HCS_PPC (ehci->hcs_params))
1073 ehci_writel(ehci, temp | PORT_POWER,
1074 status_reg);
1075 break;
1076 case USB_PORT_FEAT_RESET:
1077 if (temp & PORT_RESUME)
1078 goto error;
1079 /* line status bits may report this as low speed,
1080 * which can be fine if this root hub has a
1081 * transaction translator built in.
1082 */
1083 if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
1084 && !ehci_is_TDI(ehci)
1085 && PORT_USB11 (temp)) {
1086 ehci_dbg (ehci,
1087 "port %d low speed --> companion\n",
1088 wIndex + 1);
1089 temp |= PORT_OWNER;
1090 } else {
1091 ehci_vdbg (ehci, "port %d reset\n", wIndex + 1);
1092 temp |= PORT_RESET;
1093 temp &= ~PORT_PE;
1094
1095 /*
1096 * caller must wait, then call GetPortStatus
1097 * usb 2.0 spec says 50 ms resets on root
1098 */
1099 ehci->reset_done [wIndex] = jiffies
1100 + msecs_to_jiffies (50);
1101 }
1102 ehci_writel(ehci, temp, status_reg);
1103 break;
1104
1105 /* For downstream facing ports (these): one hub port is put
1106 * into test mode according to USB2 11.24.2.13, then the hub
1107 * must be reset (which for root hub now means rmmod+modprobe,
1108 * or else system reboot). See EHCI 2.3.9 and 4.14 for info
1109 * about the EHCI-specific stuff.
1110 */
1111 case USB_PORT_FEAT_TEST:
1112 if (!selector || selector > 5)
1113 goto error;
1114 ehci_quiesce(ehci);
1115 ehci_halt(ehci);
1116 temp |= selector << 16;
1117 ehci_writel(ehci, temp, status_reg);
1118 break;
1119
1120 default:
1121 goto error;
1122 }
1123 ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
1124 break;
1125
1126 default:
1127 error:
1128 /* "stall" on error */
1129 retval = -EPIPE;
1130 }
1131 error_exit:
1132 spin_unlock_irqrestore (&ehci->lock, flags);
1133 return retval;
1134 }
1135
ehci_relinquish_port(struct usb_hcd * hcd,int portnum)1136 static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
1137 {
1138 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
1139
1140 if (ehci_is_TDI(ehci))
1141 return;
1142 set_owner(ehci, --portnum, PORT_OWNER);
1143 }
1144
ehci_port_handed_over(struct usb_hcd * hcd,int portnum)1145 static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
1146 {
1147 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
1148 u32 __iomem *reg;
1149
1150 if (ehci_is_TDI(ehci))
1151 return 0;
1152 reg = &ehci->regs->port_status[portnum - 1];
1153 return ehci_readl(ehci, reg) & PORT_OWNER;
1154 }
1155