1 /*
2 * Copyright © 2006 Keith Packard
3 * Copyright © 2007-2008 Dave Airlie
4 * Copyright © 2007-2008 Intel Corporation
5 * Jesse Barnes <jesse.barnes@intel.com>
6 * Copyright © 2014 Intel Corporation
7 * Daniel Vetter <daniel.vetter@ffwll.ch>
8 *
9 * Permission is hereby granted, free of charge, to any person obtaining a
10 * copy of this software and associated documentation files (the "Software"),
11 * to deal in the Software without restriction, including without limitation
12 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
13 * and/or sell copies of the Software, and to permit persons to whom the
14 * Software is furnished to do so, subject to the following conditions:
15 *
16 * The above copyright notice and this permission notice shall be included in
17 * all copies or substantial portions of the Software.
18 *
19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
20 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
21 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
22 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
23 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
24 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
25 * OTHER DEALINGS IN THE SOFTWARE.
26 */
27 #ifndef __DRM_MODES_H__
28 #define __DRM_MODES_H__
29
30 #include <linux/hdmi.h>
31
32 #include <drm/drm_mode_object.h>
33 #include <drm/drm_connector.h>
34
35 struct videomode;
36
37 /*
38 * Note on terminology: here, for brevity and convenience, we refer to connector
39 * control chips as 'CRTCs'. They can control any type of connector, VGA, LVDS,
40 * DVI, etc. And 'screen' refers to the whole of the visible display, which
41 * may span multiple monitors (and therefore multiple CRTC and connector
42 * structures).
43 */
44
45 /**
46 * enum drm_mode_status - hardware support status of a mode
47 * @MODE_OK: Mode OK
48 * @MODE_HSYNC: hsync out of range
49 * @MODE_VSYNC: vsync out of range
50 * @MODE_H_ILLEGAL: mode has illegal horizontal timings
51 * @MODE_V_ILLEGAL: mode has illegal vertical timings
52 * @MODE_BAD_WIDTH: requires an unsupported linepitch
53 * @MODE_NOMODE: no mode with a matching name
54 * @MODE_NO_INTERLACE: interlaced mode not supported
55 * @MODE_NO_DBLESCAN: doublescan mode not supported
56 * @MODE_NO_VSCAN: multiscan mode not supported
57 * @MODE_MEM: insufficient video memory
58 * @MODE_VIRTUAL_X: mode width too large for specified virtual size
59 * @MODE_VIRTUAL_Y: mode height too large for specified virtual size
60 * @MODE_MEM_VIRT: insufficient video memory given virtual size
61 * @MODE_NOCLOCK: no fixed clock available
62 * @MODE_CLOCK_HIGH: clock required is too high
63 * @MODE_CLOCK_LOW: clock required is too low
64 * @MODE_CLOCK_RANGE: clock/mode isn't in a ClockRange
65 * @MODE_BAD_HVALUE: horizontal timing was out of range
66 * @MODE_BAD_VVALUE: vertical timing was out of range
67 * @MODE_BAD_VSCAN: VScan value out of range
68 * @MODE_HSYNC_NARROW: horizontal sync too narrow
69 * @MODE_HSYNC_WIDE: horizontal sync too wide
70 * @MODE_HBLANK_NARROW: horizontal blanking too narrow
71 * @MODE_HBLANK_WIDE: horizontal blanking too wide
72 * @MODE_VSYNC_NARROW: vertical sync too narrow
73 * @MODE_VSYNC_WIDE: vertical sync too wide
74 * @MODE_VBLANK_NARROW: vertical blanking too narrow
75 * @MODE_VBLANK_WIDE: vertical blanking too wide
76 * @MODE_PANEL: exceeds panel dimensions
77 * @MODE_INTERLACE_WIDTH: width too large for interlaced mode
78 * @MODE_ONE_WIDTH: only one width is supported
79 * @MODE_ONE_HEIGHT: only one height is supported
80 * @MODE_ONE_SIZE: only one resolution is supported
81 * @MODE_NO_REDUCED: monitor doesn't accept reduced blanking
82 * @MODE_NO_STEREO: stereo modes not supported
83 * @MODE_NO_420: ycbcr 420 modes not supported
84 * @MODE_STALE: mode has become stale
85 * @MODE_BAD: unspecified reason
86 * @MODE_ERROR: error condition
87 *
88 * This enum is used to filter out modes not supported by the driver/hardware
89 * combination.
90 */
91 enum drm_mode_status {
92 MODE_OK = 0,
93 MODE_HSYNC,
94 MODE_VSYNC,
95 MODE_H_ILLEGAL,
96 MODE_V_ILLEGAL,
97 MODE_BAD_WIDTH,
98 MODE_NOMODE,
99 MODE_NO_INTERLACE,
100 MODE_NO_DBLESCAN,
101 MODE_NO_VSCAN,
102 MODE_MEM,
103 MODE_VIRTUAL_X,
104 MODE_VIRTUAL_Y,
105 MODE_MEM_VIRT,
106 MODE_NOCLOCK,
107 MODE_CLOCK_HIGH,
108 MODE_CLOCK_LOW,
109 MODE_CLOCK_RANGE,
110 MODE_BAD_HVALUE,
111 MODE_BAD_VVALUE,
112 MODE_BAD_VSCAN,
113 MODE_HSYNC_NARROW,
114 MODE_HSYNC_WIDE,
115 MODE_HBLANK_NARROW,
116 MODE_HBLANK_WIDE,
117 MODE_VSYNC_NARROW,
118 MODE_VSYNC_WIDE,
119 MODE_VBLANK_NARROW,
120 MODE_VBLANK_WIDE,
121 MODE_PANEL,
122 MODE_INTERLACE_WIDTH,
123 MODE_ONE_WIDTH,
124 MODE_ONE_HEIGHT,
125 MODE_ONE_SIZE,
126 MODE_NO_REDUCED,
127 MODE_NO_STEREO,
128 MODE_NO_420,
129 MODE_STALE = -3,
130 MODE_BAD = -2,
131 MODE_ERROR = -1
132 };
133
134 #define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \
135 .name = nm, .status = 0, .type = (t), .clock = (c), \
136 .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \
137 .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \
138 .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
139 .vscan = (vs), .flags = (f)
140
141 /**
142 * DRM_MODE_RES_MM - Calculates the display size from resolution and DPI
143 * @res: The resolution in pixel
144 * @dpi: The number of dots per inch
145 */
146 #define DRM_MODE_RES_MM(res, dpi) \
147 (((res) * 254ul) / ((dpi) * 10ul))
148
149 #define __DRM_MODE_INIT(pix, hd, vd, hd_mm, vd_mm) \
150 .type = DRM_MODE_TYPE_DRIVER, .clock = (pix), \
151 .hdisplay = (hd), .hsync_start = (hd), .hsync_end = (hd), \
152 .htotal = (hd), .vdisplay = (vd), .vsync_start = (vd), \
153 .vsync_end = (vd), .vtotal = (vd), .width_mm = (hd_mm), \
154 .height_mm = (vd_mm)
155
156 /**
157 * DRM_MODE_INIT - Initialize display mode
158 * @hz: Vertical refresh rate in Hertz
159 * @hd: Horizontal resolution, width
160 * @vd: Vertical resolution, height
161 * @hd_mm: Display width in millimeters
162 * @vd_mm: Display height in millimeters
163 *
164 * This macro initializes a &drm_display_mode that contains information about
165 * refresh rate, resolution and physical size.
166 */
167 #define DRM_MODE_INIT(hz, hd, vd, hd_mm, vd_mm) \
168 __DRM_MODE_INIT((hd) * (vd) * (hz) / 1000 /* kHz */, hd, vd, hd_mm, vd_mm)
169
170 /**
171 * DRM_SIMPLE_MODE - Simple display mode
172 * @hd: Horizontal resolution, width
173 * @vd: Vertical resolution, height
174 * @hd_mm: Display width in millimeters
175 * @vd_mm: Display height in millimeters
176 *
177 * This macro initializes a &drm_display_mode that only contains info about
178 * resolution and physical size.
179 */
180 #define DRM_SIMPLE_MODE(hd, vd, hd_mm, vd_mm) \
181 __DRM_MODE_INIT(1 /* pass validation */, hd, vd, hd_mm, vd_mm)
182
183 #define CRTC_INTERLACE_HALVE_V (1 << 0) /* halve V values for interlacing */
184 #define CRTC_STEREO_DOUBLE (1 << 1) /* adjust timings for stereo modes */
185 #define CRTC_NO_DBLSCAN (1 << 2) /* don't adjust doublescan */
186 #define CRTC_NO_VSCAN (1 << 3) /* don't adjust doublescan */
187 #define CRTC_STEREO_DOUBLE_ONLY (CRTC_STEREO_DOUBLE | CRTC_NO_DBLSCAN | CRTC_NO_VSCAN)
188
189 #define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF
190
191 #define DRM_MODE_MATCH_TIMINGS (1 << 0)
192 #define DRM_MODE_MATCH_CLOCK (1 << 1)
193 #define DRM_MODE_MATCH_FLAGS (1 << 2)
194 #define DRM_MODE_MATCH_3D_FLAGS (1 << 3)
195 #define DRM_MODE_MATCH_ASPECT_RATIO (1 << 4)
196
197 /**
198 * struct drm_display_mode - DRM kernel-internal display mode structure
199 * @hdisplay: horizontal display size
200 * @hsync_start: horizontal sync start
201 * @hsync_end: horizontal sync end
202 * @htotal: horizontal total size
203 * @hskew: horizontal skew?!
204 * @vdisplay: vertical display size
205 * @vsync_start: vertical sync start
206 * @vsync_end: vertical sync end
207 * @vtotal: vertical total size
208 * @vscan: vertical scan?!
209 * @crtc_hdisplay: hardware mode horizontal display size
210 * @crtc_hblank_start: hardware mode horizontal blank start
211 * @crtc_hblank_end: hardware mode horizontal blank end
212 * @crtc_hsync_start: hardware mode horizontal sync start
213 * @crtc_hsync_end: hardware mode horizontal sync end
214 * @crtc_htotal: hardware mode horizontal total size
215 * @crtc_hskew: hardware mode horizontal skew?!
216 * @crtc_vdisplay: hardware mode vertical display size
217 * @crtc_vblank_start: hardware mode vertical blank start
218 * @crtc_vblank_end: hardware mode vertical blank end
219 * @crtc_vsync_start: hardware mode vertical sync start
220 * @crtc_vsync_end: hardware mode vertical sync end
221 * @crtc_vtotal: hardware mode vertical total size
222 *
223 * This is the kernel API display mode information structure. For the
224 * user-space version see struct drm_mode_modeinfo.
225 *
226 * The horizontal and vertical timings are defined per the following diagram.
227 *
228 * ::
229 *
230 *
231 * Active Front Sync Back
232 * Region Porch Porch
233 * <-----------------------><----------------><-------------><-------------->
234 * //////////////////////|
235 * ////////////////////// |
236 * ////////////////////// |.................. ................
237 * _______________
238 * <----- [hv]display ----->
239 * <------------- [hv]sync_start ------------>
240 * <--------------------- [hv]sync_end --------------------->
241 * <-------------------------------- [hv]total ----------------------------->*
242 *
243 * This structure contains two copies of timings. First are the plain timings,
244 * which specify the logical mode, as it would be for a progressive 1:1 scanout
245 * at the refresh rate userspace can observe through vblank timestamps. Then
246 * there's the hardware timings, which are corrected for interlacing,
247 * double-clocking and similar things. They are provided as a convenience, and
248 * can be appropriately computed using drm_mode_set_crtcinfo().
249 *
250 * For printing you can use %DRM_MODE_FMT and DRM_MODE_ARG().
251 */
252 struct drm_display_mode {
253 /**
254 * @clock:
255 *
256 * Pixel clock in kHz.
257 */
258 int clock; /* in kHz */
259 u16 hdisplay;
260 u16 hsync_start;
261 u16 hsync_end;
262 u16 htotal;
263 u16 hskew;
264 u16 vdisplay;
265 u16 vsync_start;
266 u16 vsync_end;
267 u16 vtotal;
268 u16 vscan;
269 /**
270 * @flags:
271 *
272 * Sync and timing flags:
273 *
274 * - DRM_MODE_FLAG_PHSYNC: horizontal sync is active high.
275 * - DRM_MODE_FLAG_NHSYNC: horizontal sync is active low.
276 * - DRM_MODE_FLAG_PVSYNC: vertical sync is active high.
277 * - DRM_MODE_FLAG_NVSYNC: vertical sync is active low.
278 * - DRM_MODE_FLAG_INTERLACE: mode is interlaced.
279 * - DRM_MODE_FLAG_DBLSCAN: mode uses doublescan.
280 * - DRM_MODE_FLAG_CSYNC: mode uses composite sync.
281 * - DRM_MODE_FLAG_PCSYNC: composite sync is active high.
282 * - DRM_MODE_FLAG_NCSYNC: composite sync is active low.
283 * - DRM_MODE_FLAG_HSKEW: hskew provided (not used?).
284 * - DRM_MODE_FLAG_BCAST: <deprecated>
285 * - DRM_MODE_FLAG_PIXMUX: <deprecated>
286 * - DRM_MODE_FLAG_DBLCLK: double-clocked mode.
287 * - DRM_MODE_FLAG_CLKDIV2: half-clocked mode.
288 *
289 * Additionally there's flags to specify how 3D modes are packed:
290 *
291 * - DRM_MODE_FLAG_3D_NONE: normal, non-3D mode.
292 * - DRM_MODE_FLAG_3D_FRAME_PACKING: 2 full frames for left and right.
293 * - DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: interleaved like fields.
294 * - DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: interleaved lines.
295 * - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: side-by-side full frames.
296 * - DRM_MODE_FLAG_3D_L_DEPTH: ?
297 * - DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: ?
298 * - DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: frame split into top and bottom
299 * parts.
300 * - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: frame split into left and
301 * right parts.
302 */
303 u32 flags;
304
305 /**
306 * @crtc_clock:
307 *
308 * Actual pixel or dot clock in the hardware. This differs from the
309 * logical @clock when e.g. using interlacing, double-clocking, stereo
310 * modes or other fancy stuff that changes the timings and signals
311 * actually sent over the wire.
312 *
313 * This is again in kHz.
314 *
315 * Note that with digital outputs like HDMI or DP there's usually a
316 * massive confusion between the dot clock and the signal clock at the
317 * bit encoding level. Especially when a 8b/10b encoding is used and the
318 * difference is exactly a factor of 10.
319 */
320 int crtc_clock;
321 u16 crtc_hdisplay;
322 u16 crtc_hblank_start;
323 u16 crtc_hblank_end;
324 u16 crtc_hsync_start;
325 u16 crtc_hsync_end;
326 u16 crtc_htotal;
327 u16 crtc_hskew;
328 u16 crtc_vdisplay;
329 u16 crtc_vblank_start;
330 u16 crtc_vblank_end;
331 u16 crtc_vsync_start;
332 u16 crtc_vsync_end;
333 u16 crtc_vtotal;
334
335 /**
336 * @width_mm:
337 *
338 * Addressable size of the output in mm, projectors should set this to
339 * 0.
340 */
341 u16 width_mm;
342
343 /**
344 * @height_mm:
345 *
346 * Addressable size of the output in mm, projectors should set this to
347 * 0.
348 */
349 u16 height_mm;
350
351 /**
352 * @type:
353 *
354 * A bitmask of flags, mostly about the source of a mode. Possible flags
355 * are:
356 *
357 * - DRM_MODE_TYPE_PREFERRED: Preferred mode, usually the native
358 * resolution of an LCD panel. There should only be one preferred
359 * mode per connector at any given time.
360 * - DRM_MODE_TYPE_DRIVER: Mode created by the driver, which is all of
361 * them really. Drivers must set this bit for all modes they create
362 * and expose to userspace.
363 * - DRM_MODE_TYPE_USERDEF: Mode defined or selected via the kernel
364 * command line.
365 *
366 * Plus a big list of flags which shouldn't be used at all, but are
367 * still around since these flags are also used in the userspace ABI.
368 * We no longer accept modes with these types though:
369 *
370 * - DRM_MODE_TYPE_BUILTIN: Meant for hard-coded modes, unused.
371 * Use DRM_MODE_TYPE_DRIVER instead.
372 * - DRM_MODE_TYPE_DEFAULT: Again a leftover, use
373 * DRM_MODE_TYPE_PREFERRED instead.
374 * - DRM_MODE_TYPE_CLOCK_C and DRM_MODE_TYPE_CRTC_C: Define leftovers
375 * which are stuck around for hysterical raisins only. No one has an
376 * idea what they were meant for. Don't use.
377 */
378 u8 type;
379
380 /**
381 * @expose_to_userspace:
382 *
383 * Indicates whether the mode is to be exposed to the userspace.
384 * This is to maintain a set of exposed modes while preparing
385 * user-mode's list in drm_mode_getconnector ioctl. The purpose of
386 * this only lies in the ioctl function, and is not to be used
387 * outside the function.
388 */
389 bool expose_to_userspace;
390
391 /**
392 * @head:
393 *
394 * struct list_head for mode lists.
395 */
396 struct list_head head;
397
398 /**
399 * @name:
400 *
401 * Human-readable name of the mode, filled out with drm_mode_set_name().
402 */
403 char name[DRM_DISPLAY_MODE_LEN];
404
405 /**
406 * @status:
407 *
408 * Status of the mode, used to filter out modes not supported by the
409 * hardware. See enum &drm_mode_status.
410 */
411 enum drm_mode_status status;
412
413 /**
414 * @picture_aspect_ratio:
415 *
416 * Field for setting the HDMI picture aspect ratio of a mode.
417 */
418 enum hdmi_picture_aspect picture_aspect_ratio;
419
420 };
421
422 /**
423 * DRM_MODE_FMT - printf string for &struct drm_display_mode
424 */
425 #define DRM_MODE_FMT "\"%s\": %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x"
426
427 /**
428 * DRM_MODE_ARG - printf arguments for &struct drm_display_mode
429 * @m: display mode
430 */
431 #define DRM_MODE_ARG(m) \
432 (m)->name, drm_mode_vrefresh(m), (m)->clock, \
433 (m)->hdisplay, (m)->hsync_start, (m)->hsync_end, (m)->htotal, \
434 (m)->vdisplay, (m)->vsync_start, (m)->vsync_end, (m)->vtotal, \
435 (m)->type, (m)->flags
436
437 #define obj_to_mode(x) container_of(x, struct drm_display_mode, base)
438
439 /**
440 * drm_mode_is_stereo - check for stereo mode flags
441 * @mode: drm_display_mode to check
442 *
443 * Returns:
444 * True if the mode is one of the stereo modes (like side-by-side), false if
445 * not.
446 */
drm_mode_is_stereo(const struct drm_display_mode * mode)447 static inline bool drm_mode_is_stereo(const struct drm_display_mode *mode)
448 {
449 return mode->flags & DRM_MODE_FLAG_3D_MASK;
450 }
451
452 struct drm_connector;
453 struct drm_cmdline_mode;
454
455 struct drm_display_mode *drm_mode_create(struct drm_device *dev);
456 void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode);
457 void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out,
458 const struct drm_display_mode *in);
459 int drm_mode_convert_umode(struct drm_device *dev,
460 struct drm_display_mode *out,
461 const struct drm_mode_modeinfo *in);
462 void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode);
463 void drm_mode_debug_printmodeline(const struct drm_display_mode *mode);
464 bool drm_mode_is_420_only(const struct drm_display_info *display,
465 const struct drm_display_mode *mode);
466 bool drm_mode_is_420_also(const struct drm_display_info *display,
467 const struct drm_display_mode *mode);
468 bool drm_mode_is_420(const struct drm_display_info *display,
469 const struct drm_display_mode *mode);
470
471 struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
472 enum drm_connector_tv_mode mode,
473 unsigned long pixel_clock_hz,
474 unsigned int hdisplay,
475 unsigned int vdisplay,
476 bool interlace);
477
drm_mode_analog_ntsc_480i(struct drm_device * dev)478 static inline struct drm_display_mode *drm_mode_analog_ntsc_480i(struct drm_device *dev)
479 {
480 return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_NTSC, 13500000, 720, 480, true);
481 }
482
drm_mode_analog_pal_576i(struct drm_device * dev)483 static inline struct drm_display_mode *drm_mode_analog_pal_576i(struct drm_device *dev)
484 {
485 return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_PAL, 13500000, 720, 576, true);
486 }
487
488 struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
489 int hdisplay, int vdisplay, int vrefresh,
490 bool reduced, bool interlaced,
491 bool margins);
492 struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
493 int hdisplay, int vdisplay, int vrefresh,
494 bool interlaced, int margins);
495 struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev,
496 int hdisplay, int vdisplay,
497 int vrefresh, bool interlaced,
498 int margins,
499 int GTF_M, int GTF_2C,
500 int GTF_K, int GTF_2J);
501 void drm_display_mode_from_videomode(const struct videomode *vm,
502 struct drm_display_mode *dmode);
503 void drm_display_mode_to_videomode(const struct drm_display_mode *dmode,
504 struct videomode *vm);
505 void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags);
506
507 #if defined(CONFIG_OF)
508 int of_get_drm_display_mode(struct device_node *np,
509 struct drm_display_mode *dmode, u32 *bus_flags,
510 int index);
511 int of_get_drm_panel_display_mode(struct device_node *np,
512 struct drm_display_mode *dmode, u32 *bus_flags);
513 #else
of_get_drm_display_mode(struct device_node * np,struct drm_display_mode * dmode,u32 * bus_flags,int index)514 static inline int of_get_drm_display_mode(struct device_node *np,
515 struct drm_display_mode *dmode,
516 u32 *bus_flags, int index)
517 {
518 return -EINVAL;
519 }
520
of_get_drm_panel_display_mode(struct device_node * np,struct drm_display_mode * dmode,u32 * bus_flags)521 static inline int of_get_drm_panel_display_mode(struct device_node *np,
522 struct drm_display_mode *dmode, u32 *bus_flags)
523 {
524 return -EINVAL;
525 }
526 #endif
527
528 void drm_mode_set_name(struct drm_display_mode *mode);
529 int drm_mode_vrefresh(const struct drm_display_mode *mode);
530 void drm_mode_get_hv_timing(const struct drm_display_mode *mode,
531 int *hdisplay, int *vdisplay);
532
533 void drm_mode_set_crtcinfo(struct drm_display_mode *p,
534 int adjust_flags);
535 void drm_mode_copy(struct drm_display_mode *dst,
536 const struct drm_display_mode *src);
537 void drm_mode_init(struct drm_display_mode *dst,
538 const struct drm_display_mode *src);
539 struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
540 const struct drm_display_mode *mode);
541 bool drm_mode_match(const struct drm_display_mode *mode1,
542 const struct drm_display_mode *mode2,
543 unsigned int match_flags);
544 bool drm_mode_equal(const struct drm_display_mode *mode1,
545 const struct drm_display_mode *mode2);
546 bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1,
547 const struct drm_display_mode *mode2);
548 bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1,
549 const struct drm_display_mode *mode2);
550
551 /* for use by the crtc helper probe functions */
552 enum drm_mode_status drm_mode_validate_driver(struct drm_device *dev,
553 const struct drm_display_mode *mode);
554 enum drm_mode_status drm_mode_validate_size(const struct drm_display_mode *mode,
555 int maxX, int maxY);
556 enum drm_mode_status
557 drm_mode_validate_ycbcr420(const struct drm_display_mode *mode,
558 struct drm_connector *connector);
559 void drm_mode_prune_invalid(struct drm_device *dev,
560 struct list_head *mode_list, bool verbose);
561 void drm_mode_sort(struct list_head *mode_list);
562 void drm_connector_list_update(struct drm_connector *connector);
563
564 /* parsing cmdline modes */
565 bool
566 drm_mode_parse_command_line_for_connector(const char *mode_option,
567 const struct drm_connector *connector,
568 struct drm_cmdline_mode *mode);
569 struct drm_display_mode *
570 drm_mode_create_from_cmdline_mode(struct drm_device *dev,
571 struct drm_cmdline_mode *cmd);
572
573 #endif /* __DRM_MODES_H__ */
574