1 /* Definitions for DigiBoard ditty(1) command. */ 2 3 #if !defined(TIOCMODG) 4 #define TIOCMODG (('d'<<8) | 250) /* get modem ctrl state */ 5 #define TIOCMODS (('d'<<8) | 251) /* set modem ctrl state */ 6 #endif 7 8 #if !defined(TIOCMSET) 9 #define TIOCMSET (('d'<<8) | 252) /* set modem ctrl state */ 10 #define TIOCMGET (('d'<<8) | 253) /* set modem ctrl state */ 11 #endif 12 13 #if !defined(TIOCMBIC) 14 #define TIOCMBIC (('d'<<8) | 254) /* set modem ctrl state */ 15 #define TIOCMBIS (('d'<<8) | 255) /* set modem ctrl state */ 16 #endif 17 18 #if !defined(TIOCSDTR) 19 #define TIOCSDTR (('e'<<8) | 0) /* set DTR */ 20 #define TIOCCDTR (('e'<<8) | 1) /* clear DTR */ 21 #endif 22 23 /************************************************************************ 24 * Ioctl command arguments for DIGI parameters. 25 ************************************************************************/ 26 #define DIGI_GETA (('e'<<8) | 94) /* Read params */ 27 28 #define DIGI_SETA (('e'<<8) | 95) /* Set params */ 29 #define DIGI_SETAW (('e'<<8) | 96) /* Drain & set params */ 30 #define DIGI_SETAF (('e'<<8) | 97) /* Drain, flush & set params */ 31 32 #define DIGI_GETFLOW (('e'<<8) | 99) /* Get startc/stopc flow */ 33 /* control characters */ 34 #define DIGI_SETFLOW (('e'<<8) | 100) /* Set startc/stopc flow */ 35 /* control characters */ 36 #define DIGI_GETAFLOW (('e'<<8) | 101) /* Get Aux. startc/stopc */ 37 /* flow control chars */ 38 #define DIGI_SETAFLOW (('e'<<8) | 102) /* Set Aux. startc/stopc */ 39 /* flow control chars */ 40 41 #define DIGI_GETINFO (('e'<<8) | 103) /* Fill in digi_info */ 42 #define DIGI_POLLER (('e'<<8) | 104) /* Turn on/off poller */ 43 #define DIGI_INIT (('e'<<8) | 105) /* Allow things to run. */ 44 45 struct digiflow_struct 46 { 47 unsigned char startc; /* flow cntl start char */ 48 unsigned char stopc; /* flow cntl stop char */ 49 }; 50 51 typedef struct digiflow_struct digiflow_t; 52 53 54 /************************************************************************ 55 * Values for digi_flags 56 ************************************************************************/ 57 #define DIGI_IXON 0x0001 /* Handle IXON in the FEP */ 58 #define DIGI_FAST 0x0002 /* Fast baud rates */ 59 #define RTSPACE 0x0004 /* RTS input flow control */ 60 #define CTSPACE 0x0008 /* CTS output flow control */ 61 #define DSRPACE 0x0010 /* DSR output flow control */ 62 #define DCDPACE 0x0020 /* DCD output flow control */ 63 #define DTRPACE 0x0040 /* DTR input flow control */ 64 #define DIGI_FORCEDCD 0x0100 /* Force carrier */ 65 #define DIGI_ALTPIN 0x0200 /* Alternate RJ-45 pin config */ 66 #define DIGI_AIXON 0x0400 /* Aux flow control in fep */ 67 68 69 /************************************************************************ 70 * Values for digiDload 71 ************************************************************************/ 72 #define NORMAL 0 73 #define PCI_CTL 1 74 75 #define SIZE8 0 76 #define SIZE16 1 77 #define SIZE32 2 78 79 /************************************************************************ 80 * Structure used with ioctl commands for DIGI parameters. 81 ************************************************************************/ 82 struct digi_struct 83 { 84 unsigned short digi_flags; /* Flags (see above) */ 85 }; 86 87 typedef struct digi_struct digi_t; 88 89 struct digi_info 90 { 91 unsigned long board; /* Which board is this ? */ 92 unsigned char status; /* Alive or dead */ 93 unsigned char type; /* see epca.h */ 94 unsigned char subtype; /* For future XEM, XR, etc ... */ 95 unsigned short numports; /* Number of ports configured */ 96 unsigned char *port; /* I/O Address */ 97 unsigned char *membase; /* DPR Address */ 98 unsigned char *version; /* For future ... */ 99 unsigned short windowData; /* For future ... */ 100 } ; 101