1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2013-2014 Freescale Semiconductor, Inc. 4 */ 5 6#include <dt-bindings/interrupt-controller/arm-gic.h> 7#include <dt-bindings/thermal/thermal.h> 8 9/ { 10 #address-cells = <2>; 11 #size-cells = <2>; 12 interrupt-parent = <&gic>; 13 14 aliases { 15 crypto = &crypto; 16 ethernet0 = &enet0; 17 ethernet1 = &enet1; 18 ethernet2 = &enet2; 19 rtc1 = &ftm_alarm0; 20 serial0 = &lpuart0; 21 serial1 = &lpuart1; 22 serial2 = &lpuart2; 23 serial3 = &lpuart3; 24 serial4 = &lpuart4; 25 serial5 = &lpuart5; 26 sysclk = &sysclk; 27 }; 28 29 cpus { 30 #address-cells = <1>; 31 #size-cells = <0>; 32 33 cpu0: cpu@f00 { 34 compatible = "arm,cortex-a7"; 35 device_type = "cpu"; 36 reg = <0xf00>; 37 clocks = <&clockgen 1 0>; 38 #cooling-cells = <2>; 39 }; 40 41 cpu1: cpu@f01 { 42 compatible = "arm,cortex-a7"; 43 device_type = "cpu"; 44 reg = <0xf01>; 45 clocks = <&clockgen 1 0>; 46 #cooling-cells = <2>; 47 }; 48 }; 49 50 memory@0 { 51 device_type = "memory"; 52 reg = <0x0 0x0 0x0 0x0>; 53 }; 54 55 sysclk: sysclk { 56 compatible = "fixed-clock"; 57 #clock-cells = <0>; 58 clock-frequency = <100000000>; 59 clock-output-names = "sysclk"; 60 }; 61 62 timer { 63 compatible = "arm,armv7-timer"; 64 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, 65 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, 66 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, 67 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; 68 }; 69 70 pmu { 71 compatible = "arm,cortex-a7-pmu"; 72 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, 73 <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; 74 interrupt-affinity = <&cpu0>, <&cpu1>; 75 }; 76 77 reboot { 78 compatible = "syscon-reboot"; 79 regmap = <&dcfg>; 80 offset = <0xb0>; 81 mask = <0x02>; 82 }; 83 84 soc { 85 compatible = "simple-bus"; 86 #address-cells = <2>; 87 #size-cells = <2>; 88 device_type = "soc"; 89 interrupt-parent = <&gic>; 90 ranges; 91 92 ddr: memory-controller@1080000 { 93 compatible = "fsl,qoriq-memory-controller"; 94 reg = <0x0 0x1080000 0x0 0x1000>; 95 interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; 96 big-endian; 97 }; 98 99 gic: interrupt-controller@1400000 { 100 compatible = "arm,gic-400", "arm,cortex-a7-gic"; 101 #interrupt-cells = <3>; 102 interrupt-controller; 103 reg = <0x0 0x1401000 0x0 0x1000>, 104 <0x0 0x1402000 0x0 0x2000>, 105 <0x0 0x1404000 0x0 0x2000>, 106 <0x0 0x1406000 0x0 0x2000>; 107 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; 108 109 }; 110 111 msi1: msi-controller@1570e00 { 112 compatible = "fsl,ls1021a-msi"; 113 reg = <0x0 0x1570e00 0x0 0x8>; 114 msi-controller; 115 interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; 116 }; 117 118 msi2: msi-controller@1570e08 { 119 compatible = "fsl,ls1021a-msi"; 120 reg = <0x0 0x1570e08 0x0 0x8>; 121 msi-controller; 122 interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; 123 }; 124 125 ifc: memory-controller@1530000 { 126 compatible = "fsl,ifc"; 127 reg = <0x0 0x1530000 0x0 0x10000>; 128 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; 129 status = "disabled"; 130 }; 131 132 sfp: efuse@1e80000 { 133 compatible = "fsl,ls1021a-sfp"; 134 reg = <0x0 0x1e80000 0x0 0x10000>; 135 clocks = <&clockgen 4 3>; 136 clock-names = "sfp"; 137 }; 138 139 dcfg: dcfg@1ee0000 { 140 compatible = "fsl,ls1021a-dcfg", "syscon"; 141 reg = <0x0 0x1ee0000 0x0 0x1000>; 142 big-endian; 143 }; 144 145 qspi: spi@1550000 { 146 compatible = "fsl,ls1021a-qspi"; 147 #address-cells = <1>; 148 #size-cells = <0>; 149 reg = <0x0 0x1550000 0x0 0x10000>, 150 <0x0 0x40000000 0x0 0x20000000>; 151 reg-names = "QuadSPI", "QuadSPI-memory"; 152 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; 153 clock-names = "qspi_en", "qspi"; 154 clocks = <&clockgen 4 1>, <&clockgen 4 1>; 155 status = "disabled"; 156 }; 157 158 esdhc: esdhc@1560000 { 159 compatible = "fsl,ls1021a-esdhc", "fsl,esdhc"; 160 reg = <0x0 0x1560000 0x0 0x10000>; 161 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; 162 clock-frequency = <0>; 163 voltage-ranges = <1800 1800 3300 3300>; 164 sdhci,auto-cmd12; 165 big-endian; 166 bus-width = <4>; 167 status = "disabled"; 168 }; 169 170 sata: sata@3200000 { 171 compatible = "fsl,ls1021a-ahci"; 172 reg = <0x0 0x3200000 0x0 0x10000>, 173 <0x0 0x20220520 0x0 0x4>; 174 reg-names = "ahci", "sata-ecc"; 175 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; 176 clocks = <&clockgen 4 1>; 177 dma-coherent; 178 status = "disabled"; 179 }; 180 181 scfg: scfg@1570000 { 182 compatible = "fsl,ls1021a-scfg", "syscon"; 183 reg = <0x0 0x1570000 0x0 0x10000>; 184 big-endian; 185 #address-cells = <1>; 186 #size-cells = <1>; 187 ranges = <0x0 0x0 0x1570000 0x10000>; 188 189 extirq: interrupt-controller@1ac { 190 compatible = "fsl,ls1021a-extirq"; 191 #interrupt-cells = <2>; 192 #address-cells = <0>; 193 interrupt-controller; 194 reg = <0x1ac 4>; 195 interrupt-map = 196 <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, 197 <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, 198 <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, 199 <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, 200 <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, 201 <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; 202 interrupt-map-mask = <0x7 0x0>; 203 }; 204 }; 205 206 crypto: crypto@1700000 { 207 compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; 208 fsl,sec-era = <7>; 209 #address-cells = <1>; 210 #size-cells = <1>; 211 reg = <0x0 0x1700000 0x0 0x100000>; 212 ranges = <0x0 0x0 0x1700000 0x100000>; 213 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 214 dma-coherent; 215 216 sec_jr0: jr@10000 { 217 compatible = "fsl,sec-v5.0-job-ring", 218 "fsl,sec-v4.0-job-ring"; 219 reg = <0x10000 0x10000>; 220 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; 221 }; 222 223 sec_jr1: jr@20000 { 224 compatible = "fsl,sec-v5.0-job-ring", 225 "fsl,sec-v4.0-job-ring"; 226 reg = <0x20000 0x10000>; 227 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; 228 }; 229 230 sec_jr2: jr@30000 { 231 compatible = "fsl,sec-v5.0-job-ring", 232 "fsl,sec-v4.0-job-ring"; 233 reg = <0x30000 0x10000>; 234 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; 235 }; 236 237 sec_jr3: jr@40000 { 238 compatible = "fsl,sec-v5.0-job-ring", 239 "fsl,sec-v4.0-job-ring"; 240 reg = <0x40000 0x10000>; 241 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; 242 }; 243 244 }; 245 246 clockgen: clocking@1ee1000 { 247 compatible = "fsl,ls1021a-clockgen"; 248 reg = <0x0 0x1ee1000 0x0 0x1000>; 249 #clock-cells = <2>; 250 clocks = <&sysclk>; 251 }; 252 253 tmu: tmu@1f00000 { 254 compatible = "fsl,qoriq-tmu"; 255 reg = <0x0 0x1f00000 0x0 0x10000>; 256 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; 257 fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>; 258 fsl,tmu-calibration = <0x00000000 0x00000020>, 259 <0x00000001 0x00000024>, 260 <0x00000002 0x0000002a>, 261 <0x00000003 0x00000032>, 262 <0x00000004 0x00000038>, 263 <0x00000005 0x0000003e>, 264 <0x00000006 0x00000043>, 265 <0x00000007 0x0000004a>, 266 <0x00000008 0x00000050>, 267 <0x00000009 0x00000059>, 268 <0x0000000a 0x0000005f>, 269 <0x0000000b 0x00000066>, 270 271 <0x00010000 0x00000023>, 272 <0x00010001 0x0000002b>, 273 <0x00010002 0x00000033>, 274 <0x00010003 0x0000003a>, 275 <0x00010004 0x00000042>, 276 <0x00010005 0x0000004a>, 277 <0x00010006 0x00000054>, 278 <0x00010007 0x0000005c>, 279 <0x00010008 0x00000065>, 280 <0x00010009 0x0000006f>, 281 282 <0x00020000 0x00000029>, 283 <0x00020001 0x00000033>, 284 <0x00020002 0x0000003d>, 285 <0x00020003 0x00000048>, 286 <0x00020004 0x00000054>, 287 <0x00020005 0x00000060>, 288 <0x00020006 0x0000006c>, 289 290 <0x00030000 0x00000025>, 291 <0x00030001 0x00000033>, 292 <0x00030002 0x00000043>, 293 <0x00030003 0x00000055>; 294 #thermal-sensor-cells = <1>; 295 }; 296 297 dspi0: spi@2100000 { 298 compatible = "fsl,ls1021a-v1.0-dspi"; 299 #address-cells = <1>; 300 #size-cells = <0>; 301 reg = <0x0 0x2100000 0x0 0x10000>; 302 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 303 clock-names = "dspi"; 304 clocks = <&clockgen 4 1>; 305 spi-num-chipselects = <6>; 306 big-endian; 307 status = "disabled"; 308 }; 309 310 dspi1: spi@2110000 { 311 compatible = "fsl,ls1021a-v1.0-dspi"; 312 #address-cells = <1>; 313 #size-cells = <0>; 314 reg = <0x0 0x2110000 0x0 0x10000>; 315 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 316 clock-names = "dspi"; 317 clocks = <&clockgen 4 1>; 318 spi-num-chipselects = <6>; 319 big-endian; 320 status = "disabled"; 321 }; 322 323 i2c0: i2c@2180000 { 324 compatible = "fsl,vf610-i2c"; 325 #address-cells = <1>; 326 #size-cells = <0>; 327 reg = <0x0 0x2180000 0x0 0x10000>; 328 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; 329 clocks = <&clockgen 4 1>; 330 dma-names = "rx", "tx"; 331 dmas = <&edma0 1 38>, <&edma0 1 39>; 332 status = "disabled"; 333 }; 334 335 i2c1: i2c@2190000 { 336 compatible = "fsl,vf610-i2c"; 337 #address-cells = <1>; 338 #size-cells = <0>; 339 reg = <0x0 0x2190000 0x0 0x10000>; 340 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; 341 clocks = <&clockgen 4 1>; 342 dma-names = "rx", "tx"; 343 dmas = <&edma0 1 36>, <&edma0 1 37>; 344 status = "disabled"; 345 }; 346 347 i2c2: i2c@21a0000 { 348 compatible = "fsl,vf610-i2c"; 349 #address-cells = <1>; 350 #size-cells = <0>; 351 reg = <0x0 0x21a0000 0x0 0x10000>; 352 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 353 clocks = <&clockgen 4 1>; 354 dma-names = "rx", "tx"; 355 dmas = <&edma0 1 34>, <&edma0 1 35>; 356 status = "disabled"; 357 }; 358 359 uart0: serial@21c0500 { 360 compatible = "fsl,16550-FIFO64", "ns16550a"; 361 reg = <0x0 0x21c0500 0x0 0x100>; 362 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 363 clock-frequency = <0>; 364 fifo-size = <15>; 365 status = "disabled"; 366 }; 367 368 uart1: serial@21c0600 { 369 compatible = "fsl,16550-FIFO64", "ns16550a"; 370 reg = <0x0 0x21c0600 0x0 0x100>; 371 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 372 clock-frequency = <0>; 373 fifo-size = <15>; 374 status = "disabled"; 375 }; 376 377 uart2: serial@21d0500 { 378 compatible = "fsl,16550-FIFO64", "ns16550a"; 379 reg = <0x0 0x21d0500 0x0 0x100>; 380 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; 381 clock-frequency = <0>; 382 fifo-size = <15>; 383 status = "disabled"; 384 }; 385 386 uart3: serial@21d0600 { 387 compatible = "fsl,16550-FIFO64", "ns16550a"; 388 reg = <0x0 0x21d0600 0x0 0x100>; 389 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; 390 clock-frequency = <0>; 391 fifo-size = <15>; 392 status = "disabled"; 393 }; 394 395 counter0: counter@29d0000 { 396 compatible = "fsl,ftm-quaddec"; 397 reg = <0x0 0x29d0000 0x0 0x10000>; 398 big-endian; 399 status = "disabled"; 400 }; 401 402 counter1: counter@29e0000 { 403 compatible = "fsl,ftm-quaddec"; 404 reg = <0x0 0x29e0000 0x0 0x10000>; 405 big-endian; 406 status = "disabled"; 407 }; 408 409 counter2: counter@29f0000 { 410 compatible = "fsl,ftm-quaddec"; 411 reg = <0x0 0x29f0000 0x0 0x10000>; 412 big-endian; 413 status = "disabled"; 414 }; 415 416 counter3: counter@2a00000 { 417 compatible = "fsl,ftm-quaddec"; 418 reg = <0x0 0x2a00000 0x0 0x10000>; 419 big-endian; 420 status = "disabled"; 421 }; 422 423 gpio0: gpio@2300000 { 424 compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; 425 reg = <0x0 0x2300000 0x0 0x10000>; 426 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 427 gpio-controller; 428 #gpio-cells = <2>; 429 interrupt-controller; 430 #interrupt-cells = <2>; 431 }; 432 433 gpio1: gpio@2310000 { 434 compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; 435 reg = <0x0 0x2310000 0x0 0x10000>; 436 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; 437 gpio-controller; 438 #gpio-cells = <2>; 439 interrupt-controller; 440 #interrupt-cells = <2>; 441 }; 442 443 gpio2: gpio@2320000 { 444 compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; 445 reg = <0x0 0x2320000 0x0 0x10000>; 446 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; 447 gpio-controller; 448 #gpio-cells = <2>; 449 interrupt-controller; 450 #interrupt-cells = <2>; 451 }; 452 453 gpio3: gpio@2330000 { 454 compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; 455 reg = <0x0 0x2330000 0x0 0x10000>; 456 interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; 457 gpio-controller; 458 #gpio-cells = <2>; 459 interrupt-controller; 460 #interrupt-cells = <2>; 461 }; 462 463 lpuart0: serial@2950000 { 464 compatible = "fsl,ls1021a-lpuart"; 465 reg = <0x0 0x2950000 0x0 0x1000>; 466 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; 467 clocks = <&sysclk>; 468 clock-names = "ipg"; 469 status = "disabled"; 470 }; 471 472 lpuart1: serial@2960000 { 473 compatible = "fsl,ls1021a-lpuart"; 474 reg = <0x0 0x2960000 0x0 0x1000>; 475 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 476 clocks = <&clockgen 4 1>; 477 clock-names = "ipg"; 478 status = "disabled"; 479 }; 480 481 lpuart2: serial@2970000 { 482 compatible = "fsl,ls1021a-lpuart"; 483 reg = <0x0 0x2970000 0x0 0x1000>; 484 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 485 clocks = <&clockgen 4 1>; 486 clock-names = "ipg"; 487 status = "disabled"; 488 }; 489 490 lpuart3: serial@2980000 { 491 compatible = "fsl,ls1021a-lpuart"; 492 reg = <0x0 0x2980000 0x0 0x1000>; 493 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 494 clocks = <&clockgen 4 1>; 495 clock-names = "ipg"; 496 status = "disabled"; 497 }; 498 499 lpuart4: serial@2990000 { 500 compatible = "fsl,ls1021a-lpuart"; 501 reg = <0x0 0x2990000 0x0 0x1000>; 502 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 503 clocks = <&clockgen 4 1>; 504 clock-names = "ipg"; 505 status = "disabled"; 506 }; 507 508 lpuart5: serial@29a0000 { 509 compatible = "fsl,ls1021a-lpuart"; 510 reg = <0x0 0x29a0000 0x0 0x1000>; 511 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; 512 clocks = <&clockgen 4 1>; 513 clock-names = "ipg"; 514 status = "disabled"; 515 }; 516 517 pwm0: pwm@29d0000 { 518 compatible = "fsl,vf610-ftm-pwm"; 519 #pwm-cells = <3>; 520 reg = <0x0 0x29d0000 0x0 0x10000>; 521 clock-names = "ftm_sys", "ftm_ext", 522 "ftm_fix", "ftm_cnt_clk_en"; 523 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 524 <&clockgen 4 1>, <&clockgen 4 1>; 525 big-endian; 526 status = "disabled"; 527 }; 528 529 pwm1: pwm@29e0000 { 530 compatible = "fsl,vf610-ftm-pwm"; 531 #pwm-cells = <3>; 532 reg = <0x0 0x29e0000 0x0 0x10000>; 533 clock-names = "ftm_sys", "ftm_ext", 534 "ftm_fix", "ftm_cnt_clk_en"; 535 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 536 <&clockgen 4 1>, <&clockgen 4 1>; 537 big-endian; 538 status = "disabled"; 539 }; 540 541 pwm2: pwm@29f0000 { 542 compatible = "fsl,vf610-ftm-pwm"; 543 #pwm-cells = <3>; 544 reg = <0x0 0x29f0000 0x0 0x10000>; 545 clock-names = "ftm_sys", "ftm_ext", 546 "ftm_fix", "ftm_cnt_clk_en"; 547 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 548 <&clockgen 4 1>, <&clockgen 4 1>; 549 big-endian; 550 status = "disabled"; 551 }; 552 553 pwm3: pwm@2a00000 { 554 compatible = "fsl,vf610-ftm-pwm"; 555 #pwm-cells = <3>; 556 reg = <0x0 0x2a00000 0x0 0x10000>; 557 clock-names = "ftm_sys", "ftm_ext", 558 "ftm_fix", "ftm_cnt_clk_en"; 559 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 560 <&clockgen 4 1>, <&clockgen 4 1>; 561 big-endian; 562 status = "disabled"; 563 }; 564 565 pwm4: pwm@2a10000 { 566 compatible = "fsl,vf610-ftm-pwm"; 567 #pwm-cells = <3>; 568 reg = <0x0 0x2a10000 0x0 0x10000>; 569 clock-names = "ftm_sys", "ftm_ext", 570 "ftm_fix", "ftm_cnt_clk_en"; 571 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 572 <&clockgen 4 1>, <&clockgen 4 1>; 573 big-endian; 574 status = "disabled"; 575 }; 576 577 pwm5: pwm@2a20000 { 578 compatible = "fsl,vf610-ftm-pwm"; 579 #pwm-cells = <3>; 580 reg = <0x0 0x2a20000 0x0 0x10000>; 581 clock-names = "ftm_sys", "ftm_ext", 582 "ftm_fix", "ftm_cnt_clk_en"; 583 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 584 <&clockgen 4 1>, <&clockgen 4 1>; 585 big-endian; 586 status = "disabled"; 587 }; 588 589 pwm6: pwm@2a30000 { 590 compatible = "fsl,vf610-ftm-pwm"; 591 #pwm-cells = <3>; 592 reg = <0x0 0x2a30000 0x0 0x10000>; 593 clock-names = "ftm_sys", "ftm_ext", 594 "ftm_fix", "ftm_cnt_clk_en"; 595 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 596 <&clockgen 4 1>, <&clockgen 4 1>; 597 big-endian; 598 status = "disabled"; 599 }; 600 601 pwm7: pwm@2a40000 { 602 compatible = "fsl,vf610-ftm-pwm"; 603 #pwm-cells = <3>; 604 reg = <0x0 0x2a40000 0x0 0x10000>; 605 clock-names = "ftm_sys", "ftm_ext", 606 "ftm_fix", "ftm_cnt_clk_en"; 607 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 608 <&clockgen 4 1>, <&clockgen 4 1>; 609 big-endian; 610 status = "disabled"; 611 }; 612 613 wdog0: watchdog@2ad0000 { 614 compatible = "fsl,imx21-wdt"; 615 reg = <0x0 0x2ad0000 0x0 0x10000>; 616 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; 617 clocks = <&clockgen 4 1>; 618 clock-names = "wdog-en"; 619 big-endian; 620 }; 621 622 sai1: sai@2b50000 { 623 #sound-dai-cells = <0>; 624 compatible = "fsl,vf610-sai"; 625 reg = <0x0 0x2b50000 0x0 0x10000>; 626 interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; 627 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 628 <&clockgen 4 1>, <&clockgen 4 1>; 629 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 630 dma-names = "tx", "rx"; 631 dmas = <&edma0 1 47>, 632 <&edma0 1 46>; 633 status = "disabled"; 634 }; 635 636 sai2: sai@2b60000 { 637 #sound-dai-cells = <0>; 638 compatible = "fsl,vf610-sai"; 639 reg = <0x0 0x2b60000 0x0 0x10000>; 640 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; 641 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 642 <&clockgen 4 1>, <&clockgen 4 1>; 643 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 644 dma-names = "tx", "rx"; 645 dmas = <&edma0 1 45>, 646 <&edma0 1 44>; 647 status = "disabled"; 648 }; 649 650 edma0: dma-controller@2c00000 { 651 #dma-cells = <2>; 652 compatible = "fsl,vf610-edma"; 653 reg = <0x0 0x2c00000 0x0 0x10000>, 654 <0x0 0x2c10000 0x0 0x10000>, 655 <0x0 0x2c20000 0x0 0x10000>; 656 interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, 657 <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; 658 interrupt-names = "edma-tx", "edma-err"; 659 dma-channels = <32>; 660 big-endian; 661 clock-names = "dmamux0", "dmamux1"; 662 clocks = <&clockgen 4 1>, 663 <&clockgen 4 1>; 664 }; 665 666 dcu: dcu@2ce0000 { 667 compatible = "fsl,ls1021a-dcu"; 668 reg = <0x0 0x2ce0000 0x0 0x10000>; 669 interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; 670 clocks = <&clockgen 4 0>, 671 <&clockgen 4 0>; 672 clock-names = "dcu", "pix"; 673 big-endian; 674 status = "disabled"; 675 }; 676 677 mdio0: mdio@2d24000 { 678 compatible = "gianfar"; 679 device_type = "mdio"; 680 #address-cells = <1>; 681 #size-cells = <0>; 682 reg = <0x0 0x2d24000 0x0 0x4000>, 683 <0x0 0x2d10030 0x0 0x4>; 684 }; 685 686 mdio1: mdio@2d64000 { 687 compatible = "gianfar"; 688 device_type = "mdio"; 689 #address-cells = <1>; 690 #size-cells = <0>; 691 reg = <0x0 0x2d64000 0x0 0x4000>, 692 <0x0 0x2d50030 0x0 0x4>; 693 }; 694 695 ptp_clock@2d10e00 { 696 compatible = "fsl,etsec-ptp"; 697 reg = <0x0 0x2d10e00 0x0 0xb0>; 698 interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; 699 fsl,tclk-period = <5>; 700 fsl,tmr-prsc = <2>; 701 fsl,tmr-add = <0xaaaaaaab>; 702 fsl,tmr-fiper1 = <999999995>; 703 fsl,tmr-fiper2 = <999999995>; 704 fsl,max-adj = <499999999>; 705 fsl,extts-fifo; 706 }; 707 708 enet0: ethernet@2d10000 { 709 compatible = "fsl,etsec2"; 710 device_type = "network"; 711 #address-cells = <2>; 712 #size-cells = <2>; 713 interrupt-parent = <&gic>; 714 model = "eTSEC"; 715 fsl,magic-packet; 716 ranges; 717 dma-coherent; 718 719 queue-group@2d10000 { 720 #address-cells = <2>; 721 #size-cells = <2>; 722 reg = <0x0 0x2d10000 0x0 0x1000>; 723 interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, 724 <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, 725 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; 726 }; 727 728 queue-group@2d14000 { 729 #address-cells = <2>; 730 #size-cells = <2>; 731 reg = <0x0 0x2d14000 0x0 0x1000>; 732 interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, 733 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, 734 <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; 735 }; 736 }; 737 738 enet1: ethernet@2d50000 { 739 compatible = "fsl,etsec2"; 740 device_type = "network"; 741 #address-cells = <2>; 742 #size-cells = <2>; 743 interrupt-parent = <&gic>; 744 model = "eTSEC"; 745 ranges; 746 dma-coherent; 747 748 queue-group@2d50000 { 749 #address-cells = <2>; 750 #size-cells = <2>; 751 reg = <0x0 0x2d50000 0x0 0x1000>; 752 interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, 753 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, 754 <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; 755 }; 756 757 queue-group@2d54000 { 758 #address-cells = <2>; 759 #size-cells = <2>; 760 reg = <0x0 0x2d54000 0x0 0x1000>; 761 interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, 762 <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, 763 <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; 764 }; 765 }; 766 767 enet2: ethernet@2d90000 { 768 compatible = "fsl,etsec2"; 769 device_type = "network"; 770 #address-cells = <2>; 771 #size-cells = <2>; 772 interrupt-parent = <&gic>; 773 model = "eTSEC"; 774 ranges; 775 dma-coherent; 776 777 queue-group@2d90000 { 778 #address-cells = <2>; 779 #size-cells = <2>; 780 reg = <0x0 0x2d90000 0x0 0x1000>; 781 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, 782 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, 783 <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; 784 }; 785 786 queue-group@2d94000 { 787 #address-cells = <2>; 788 #size-cells = <2>; 789 reg = <0x0 0x2d94000 0x0 0x1000>; 790 interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, 791 <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, 792 <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; 793 }; 794 }; 795 796 usb2: usb@8600000 { 797 compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; 798 reg = <0x0 0x8600000 0x0 0x1000>; 799 interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; 800 dr_mode = "host"; 801 phy_type = "ulpi"; 802 }; 803 804 usb3: usb@3100000 { 805 compatible = "snps,dwc3"; 806 reg = <0x0 0x3100000 0x0 0x10000>; 807 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; 808 dr_mode = "host"; 809 snps,quirk-frame-length-adjustment = <0x20>; 810 snps,dis_rxdet_inp3_quirk; 811 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; 812 }; 813 814 pcie@3400000 { 815 compatible = "fsl,ls1021a-pcie"; 816 reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */ 817 <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ 818 reg-names = "regs", "config"; 819 interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ 820 fsl,pcie-scfg = <&scfg 0>; 821 #address-cells = <3>; 822 #size-cells = <2>; 823 device_type = "pci"; 824 num-viewport = <6>; 825 bus-range = <0x0 0xff>; 826 ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */ 827 <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ 828 msi-parent = <&msi1>, <&msi2>; 829 #interrupt-cells = <1>; 830 interrupt-map-mask = <0 0 0 7>; 831 interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, 832 <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, 833 <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, 834 <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; 835 status = "disabled"; 836 }; 837 838 pcie@3500000 { 839 compatible = "fsl,ls1021a-pcie"; 840 reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */ 841 <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ 842 reg-names = "regs", "config"; 843 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; 844 fsl,pcie-scfg = <&scfg 1>; 845 #address-cells = <3>; 846 #size-cells = <2>; 847 device_type = "pci"; 848 num-viewport = <6>; 849 bus-range = <0x0 0xff>; 850 ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */ 851 <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ 852 msi-parent = <&msi1>, <&msi2>; 853 #interrupt-cells = <1>; 854 interrupt-map-mask = <0 0 0 7>; 855 interrupt-map = <0000 0 0 1 &gic GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, 856 <0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, 857 <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, 858 <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; 859 status = "disabled"; 860 }; 861 862 can0: can@2a70000 { 863 compatible = "fsl,ls1021ar2-flexcan"; 864 reg = <0x0 0x2a70000 0x0 0x1000>; 865 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; 866 clocks = <&clockgen 4 1>, <&clockgen 4 1>; 867 clock-names = "ipg", "per"; 868 big-endian; 869 }; 870 871 can1: can@2a80000 { 872 compatible = "fsl,ls1021ar2-flexcan"; 873 reg = <0x0 0x2a80000 0x0 0x1000>; 874 interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; 875 clocks = <&clockgen 4 1>, <&clockgen 4 1>; 876 clock-names = "ipg", "per"; 877 big-endian; 878 }; 879 880 can2: can@2a90000 { 881 compatible = "fsl,ls1021ar2-flexcan"; 882 reg = <0x0 0x2a90000 0x0 0x1000>; 883 interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; 884 clocks = <&clockgen 4 1>, <&clockgen 4 1>; 885 clock-names = "ipg", "per"; 886 big-endian; 887 }; 888 889 can3: can@2aa0000 { 890 compatible = "fsl,ls1021ar2-flexcan"; 891 reg = <0x0 0x2aa0000 0x0 0x1000>; 892 interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; 893 clocks = <&clockgen 4 1>, <&clockgen 4 1>; 894 clock-names = "ipg", "per"; 895 big-endian; 896 }; 897 898 ocram1: sram@10000000 { 899 compatible = "mmio-sram"; 900 reg = <0x0 0x10000000 0x0 0x10000>; 901 #address-cells = <1>; 902 #size-cells = <1>; 903 ranges = <0x0 0x0 0x10000000 0x10000>; 904 }; 905 906 ocram2: sram@10010000 { 907 compatible = "mmio-sram"; 908 reg = <0x0 0x10010000 0x0 0x10000>; 909 #address-cells = <1>; 910 #size-cells = <1>; 911 ranges = <0x0 0x0 0x10010000 0x10000>; 912 }; 913 914 qdma: dma-controller@8390000 { 915 compatible = "fsl,ls1021a-qdma"; 916 reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ 917 <0x0 0x8389000 0x0 0x1000>, /* Status regs */ 918 <0x0 0x838a000 0x0 0x2000>; /* Block regs */ 919 interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, 920 <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, 921 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; 922 interrupt-names = "qdma-error", 923 "qdma-queue0", "qdma-queue1"; 924 #dma-cells = <2>; 925 dma-channels = <8>; 926 block-number = <1>; 927 block-offset = <0x1000>; 928 fsl,dma-queues = <2>; 929 status-sizes = <64>; 930 queue-sizes = <64 64>; 931 big-endian; 932 }; 933 934 rcpm: power-controller@1ee2140 { 935 compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+"; 936 reg = <0x0 0x1ee2140 0x0 0x8>; 937 #fsl,rcpm-wakeup-cells = <2>; 938 #power-domain-cells = <0>; 939 }; 940 941 ftm_alarm0: timer0@29d0000 { 942 compatible = "fsl,ls1021a-ftm-alarm"; 943 reg = <0x0 0x29d0000 0x0 0x10000>; 944 reg-names = "ftm"; 945 fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>; 946 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; 947 big-endian; 948 }; 949 }; 950 951 thermal-zones { 952 cpu_thermal: cpu-thermal { 953 polling-delay-passive = <1000>; 954 polling-delay = <5000>; 955 956 thermal-sensors = <&tmu 0>; 957 958 trips { 959 cpu_alert: cpu-alert { 960 temperature = <85000>; 961 hysteresis = <2000>; 962 type = "passive"; 963 }; 964 cpu_crit: cpu-crit { 965 temperature = <95000>; 966 hysteresis = <2000>; 967 type = "critical"; 968 }; 969 }; 970 971 cooling-maps { 972 map0 { 973 trip = <&cpu_alert>; 974 cooling-device = 975 <&cpu0 THERMAL_NO_LIMIT 976 THERMAL_NO_LIMIT>, 977 <&cpu1 THERMAL_NO_LIMIT 978 THERMAL_NO_LIMIT>; 979 }; 980 }; 981 }; 982 }; 983}; 984