1 /*
2 * Copyright 2012-15 Advanced Micro Devices, Inc.
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice shall be included in
12 * all copies or substantial portions of the Software.
13 *
14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20 * OTHER DEALINGS IN THE SOFTWARE.
21 *
22 * Authors: AMD
23 *
24 */
25
26 #include "reg_helper.h"
27
28 #include "core_types.h"
29 #include "link_encoder.h"
30 #include "dce_link_encoder.h"
31 #include "stream_encoder.h"
32 #include "dc_bios_types.h"
33
34 #include "gpio_service_interface.h"
35
36 #include "dce/dce_11_0_d.h"
37 #include "dce/dce_11_0_sh_mask.h"
38 #include "dce/dce_11_0_enum.h"
39
40 #ifndef DMU_MEM_PWR_CNTL__DMCU_IRAM_MEM_PWR_STATE__SHIFT
41 #define DMU_MEM_PWR_CNTL__DMCU_IRAM_MEM_PWR_STATE__SHIFT 0xa
42 #endif
43
44 #ifndef DMU_MEM_PWR_CNTL__DMCU_IRAM_MEM_PWR_STATE_MASK
45 #define DMU_MEM_PWR_CNTL__DMCU_IRAM_MEM_PWR_STATE_MASK 0x00000400L
46 #endif
47
48 #ifndef HPD0_DC_HPD_CONTROL__DC_HPD_EN_MASK
49 #define HPD0_DC_HPD_CONTROL__DC_HPD_EN_MASK 0x10000000L
50 #endif
51
52 #ifndef HPD0_DC_HPD_CONTROL__DC_HPD_EN__SHIFT
53 #define HPD0_DC_HPD_CONTROL__DC_HPD_EN__SHIFT 0x1c
54 #endif
55
56 #define CTX \
57 enc110->base.ctx
58 #define DC_LOGGER \
59 enc110->base.ctx->logger
60
61 #define REG(reg)\
62 (enc110->link_regs->reg)
63
64 #define AUX_REG(reg)\
65 (enc110->aux_regs->reg)
66
67 #define HPD_REG(reg)\
68 (enc110->hpd_regs->reg)
69
70 #define DEFAULT_AUX_MAX_DATA_SIZE 16
71 #define AUX_MAX_DEFER_WRITE_RETRY 20
72 /*
73 * @brief
74 * Trigger Source Select
75 * ASIC-dependent, actual values for register programming
76 */
77 #define DCE110_DIG_FE_SOURCE_SELECT_INVALID 0x0
78 #define DCE110_DIG_FE_SOURCE_SELECT_DIGA 0x1
79 #define DCE110_DIG_FE_SOURCE_SELECT_DIGB 0x2
80 #define DCE110_DIG_FE_SOURCE_SELECT_DIGC 0x4
81 #define DCE110_DIG_FE_SOURCE_SELECT_DIGD 0x08
82 #define DCE110_DIG_FE_SOURCE_SELECT_DIGE 0x10
83 #define DCE110_DIG_FE_SOURCE_SELECT_DIGF 0x20
84 #define DCE110_DIG_FE_SOURCE_SELECT_DIGG 0x40
85
86 enum {
87 DP_MST_UPDATE_MAX_RETRY = 50
88 };
89
90 #define DIG_REG(reg)\
91 (reg + enc110->offsets.dig)
92
93 #define DP_REG(reg)\
94 (reg + enc110->offsets.dp)
95
96 static const struct link_encoder_funcs dce110_lnk_enc_funcs = {
97 .validate_output_with_stream =
98 dce110_link_encoder_validate_output_with_stream,
99 .hw_init = dce110_link_encoder_hw_init,
100 .setup = dce110_link_encoder_setup,
101 .enable_tmds_output = dce110_link_encoder_enable_tmds_output,
102 .enable_dp_output = dce110_link_encoder_enable_dp_output,
103 .enable_dp_mst_output = dce110_link_encoder_enable_dp_mst_output,
104 .enable_lvds_output = dce110_link_encoder_enable_lvds_output,
105 .disable_output = dce110_link_encoder_disable_output,
106 .dp_set_lane_settings = dce110_link_encoder_dp_set_lane_settings,
107 .dp_set_phy_pattern = dce110_link_encoder_dp_set_phy_pattern,
108 .update_mst_stream_allocation_table =
109 dce110_link_encoder_update_mst_stream_allocation_table,
110 .psr_program_dp_dphy_fast_training =
111 dce110_psr_program_dp_dphy_fast_training,
112 .psr_program_secondary_packet = dce110_psr_program_secondary_packet,
113 .connect_dig_be_to_fe = dce110_link_encoder_connect_dig_be_to_fe,
114 .enable_hpd = dce110_link_encoder_enable_hpd,
115 .disable_hpd = dce110_link_encoder_disable_hpd,
116 .is_dig_enabled = dce110_is_dig_enabled,
117 .destroy = dce110_link_encoder_destroy,
118 .get_max_link_cap = dce110_link_encoder_get_max_link_cap,
119 .get_dig_frontend = dce110_get_dig_frontend,
120 };
121
link_transmitter_control(struct dce110_link_encoder * enc110,struct bp_transmitter_control * cntl)122 static enum bp_result link_transmitter_control(
123 struct dce110_link_encoder *enc110,
124 struct bp_transmitter_control *cntl)
125 {
126 enum bp_result result;
127 struct dc_bios *bp = enc110->base.ctx->dc_bios;
128
129 result = bp->funcs->transmitter_control(bp, cntl);
130
131 return result;
132 }
133
enable_phy_bypass_mode(struct dce110_link_encoder * enc110,bool enable)134 static void enable_phy_bypass_mode(
135 struct dce110_link_encoder *enc110,
136 bool enable)
137 {
138 /* This register resides in DP back end block;
139 * transmitter is used for the offset */
140
141 REG_UPDATE(DP_DPHY_CNTL, DPHY_BYPASS, enable);
142
143 }
144
disable_prbs_symbols(struct dce110_link_encoder * enc110,bool disable)145 static void disable_prbs_symbols(
146 struct dce110_link_encoder *enc110,
147 bool disable)
148 {
149 /* This register resides in DP back end block;
150 * transmitter is used for the offset */
151
152 REG_UPDATE_4(DP_DPHY_CNTL,
153 DPHY_ATEST_SEL_LANE0, disable,
154 DPHY_ATEST_SEL_LANE1, disable,
155 DPHY_ATEST_SEL_LANE2, disable,
156 DPHY_ATEST_SEL_LANE3, disable);
157 }
158
disable_prbs_mode(struct dce110_link_encoder * enc110)159 static void disable_prbs_mode(
160 struct dce110_link_encoder *enc110)
161 {
162 REG_UPDATE(DP_DPHY_PRBS_CNTL, DPHY_PRBS_EN, 0);
163 }
164
program_pattern_symbols(struct dce110_link_encoder * enc110,uint16_t pattern_symbols[8])165 static void program_pattern_symbols(
166 struct dce110_link_encoder *enc110,
167 uint16_t pattern_symbols[8])
168 {
169 /* This register resides in DP back end block;
170 * transmitter is used for the offset */
171
172 REG_SET_3(DP_DPHY_SYM0, 0,
173 DPHY_SYM1, pattern_symbols[0],
174 DPHY_SYM2, pattern_symbols[1],
175 DPHY_SYM3, pattern_symbols[2]);
176
177 /* This register resides in DP back end block;
178 * transmitter is used for the offset */
179
180 REG_SET_3(DP_DPHY_SYM1, 0,
181 DPHY_SYM4, pattern_symbols[3],
182 DPHY_SYM5, pattern_symbols[4],
183 DPHY_SYM6, pattern_symbols[5]);
184
185 /* This register resides in DP back end block;
186 * transmitter is used for the offset */
187
188 REG_SET_2(DP_DPHY_SYM2, 0,
189 DPHY_SYM7, pattern_symbols[6],
190 DPHY_SYM8, pattern_symbols[7]);
191 }
192
set_dp_phy_pattern_d102(struct dce110_link_encoder * enc110)193 static void set_dp_phy_pattern_d102(
194 struct dce110_link_encoder *enc110)
195 {
196 /* Disable PHY Bypass mode to setup the test pattern */
197 enable_phy_bypass_mode(enc110, false);
198
199 /* For 10-bit PRBS or debug symbols
200 * please use the following sequence: */
201
202 /* Enable debug symbols on the lanes */
203
204 disable_prbs_symbols(enc110, true);
205
206 /* Disable PRBS mode */
207 disable_prbs_mode(enc110);
208
209 /* Program debug symbols to be output */
210 {
211 uint16_t pattern_symbols[8] = {
212 0x2AA, 0x2AA, 0x2AA, 0x2AA,
213 0x2AA, 0x2AA, 0x2AA, 0x2AA
214 };
215
216 program_pattern_symbols(enc110, pattern_symbols);
217 }
218
219 /* Enable phy bypass mode to enable the test pattern */
220
221 enable_phy_bypass_mode(enc110, true);
222 }
223
set_link_training_complete(struct dce110_link_encoder * enc110,bool complete)224 static void set_link_training_complete(
225 struct dce110_link_encoder *enc110,
226 bool complete)
227 {
228 /* This register resides in DP back end block;
229 * transmitter is used for the offset */
230
231 REG_UPDATE(DP_LINK_CNTL, DP_LINK_TRAINING_COMPLETE, complete);
232
233 }
234
dce110_get_dig_frontend(struct link_encoder * enc)235 unsigned int dce110_get_dig_frontend(struct link_encoder *enc)
236 {
237 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
238 u32 value;
239 enum engine_id result;
240
241 REG_GET(DIG_BE_CNTL, DIG_FE_SOURCE_SELECT, &value);
242
243 switch (value) {
244 case DCE110_DIG_FE_SOURCE_SELECT_DIGA:
245 result = ENGINE_ID_DIGA;
246 break;
247 case DCE110_DIG_FE_SOURCE_SELECT_DIGB:
248 result = ENGINE_ID_DIGB;
249 break;
250 case DCE110_DIG_FE_SOURCE_SELECT_DIGC:
251 result = ENGINE_ID_DIGC;
252 break;
253 case DCE110_DIG_FE_SOURCE_SELECT_DIGD:
254 result = ENGINE_ID_DIGD;
255 break;
256 case DCE110_DIG_FE_SOURCE_SELECT_DIGE:
257 result = ENGINE_ID_DIGE;
258 break;
259 case DCE110_DIG_FE_SOURCE_SELECT_DIGF:
260 result = ENGINE_ID_DIGF;
261 break;
262 case DCE110_DIG_FE_SOURCE_SELECT_DIGG:
263 result = ENGINE_ID_DIGG;
264 break;
265 default:
266 // invalid source select DIG
267 result = ENGINE_ID_UNKNOWN;
268 }
269
270 return result;
271 }
272
dce110_link_encoder_set_dp_phy_pattern_training_pattern(struct link_encoder * enc,uint32_t index)273 void dce110_link_encoder_set_dp_phy_pattern_training_pattern(
274 struct link_encoder *enc,
275 uint32_t index)
276 {
277 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
278 /* Write Training Pattern */
279
280 REG_WRITE(DP_DPHY_TRAINING_PATTERN_SEL, index);
281
282 /* Set HW Register Training Complete to false */
283
284 set_link_training_complete(enc110, false);
285
286 /* Disable PHY Bypass mode to output Training Pattern */
287
288 enable_phy_bypass_mode(enc110, false);
289
290 /* Disable PRBS mode */
291 disable_prbs_mode(enc110);
292 }
293
setup_panel_mode(struct dce110_link_encoder * enc110,enum dp_panel_mode panel_mode)294 static void setup_panel_mode(
295 struct dce110_link_encoder *enc110,
296 enum dp_panel_mode panel_mode)
297 {
298 uint32_t value;
299 struct dc_context *ctx = enc110->base.ctx;
300
301 /* if psp set panel mode, dal should be program it */
302 if (ctx->dc->caps.psp_setup_panel_mode)
303 return;
304
305 ASSERT(REG(DP_DPHY_INTERNAL_CTRL));
306 value = REG_READ(DP_DPHY_INTERNAL_CTRL);
307
308 switch (panel_mode) {
309 case DP_PANEL_MODE_EDP:
310 value = 0x1;
311 break;
312 case DP_PANEL_MODE_SPECIAL:
313 value = 0x11;
314 break;
315 default:
316 value = 0x0;
317 break;
318 }
319
320 REG_WRITE(DP_DPHY_INTERNAL_CTRL, value);
321 }
322
set_dp_phy_pattern_symbol_error(struct dce110_link_encoder * enc110)323 static void set_dp_phy_pattern_symbol_error(
324 struct dce110_link_encoder *enc110)
325 {
326 /* Disable PHY Bypass mode to setup the test pattern */
327 enable_phy_bypass_mode(enc110, false);
328
329 /* program correct panel mode*/
330 setup_panel_mode(enc110, DP_PANEL_MODE_DEFAULT);
331
332 /* A PRBS23 pattern is used for most DP electrical measurements. */
333
334 /* Enable PRBS symbols on the lanes */
335 disable_prbs_symbols(enc110, false);
336
337 /* For PRBS23 Set bit DPHY_PRBS_SEL=1 and Set bit DPHY_PRBS_EN=1 */
338 REG_UPDATE_2(DP_DPHY_PRBS_CNTL,
339 DPHY_PRBS_SEL, 1,
340 DPHY_PRBS_EN, 1);
341
342 /* Enable phy bypass mode to enable the test pattern */
343 enable_phy_bypass_mode(enc110, true);
344 }
345
set_dp_phy_pattern_prbs7(struct dce110_link_encoder * enc110)346 static void set_dp_phy_pattern_prbs7(
347 struct dce110_link_encoder *enc110)
348 {
349 /* Disable PHY Bypass mode to setup the test pattern */
350 enable_phy_bypass_mode(enc110, false);
351
352 /* A PRBS7 pattern is used for most DP electrical measurements. */
353
354 /* Enable PRBS symbols on the lanes */
355 disable_prbs_symbols(enc110, false);
356
357 /* For PRBS7 Set bit DPHY_PRBS_SEL=0 and Set bit DPHY_PRBS_EN=1 */
358 REG_UPDATE_2(DP_DPHY_PRBS_CNTL,
359 DPHY_PRBS_SEL, 0,
360 DPHY_PRBS_EN, 1);
361
362 /* Enable phy bypass mode to enable the test pattern */
363 enable_phy_bypass_mode(enc110, true);
364 }
365
set_dp_phy_pattern_80bit_custom(struct dce110_link_encoder * enc110,const uint8_t * pattern)366 static void set_dp_phy_pattern_80bit_custom(
367 struct dce110_link_encoder *enc110,
368 const uint8_t *pattern)
369 {
370 /* Disable PHY Bypass mode to setup the test pattern */
371 enable_phy_bypass_mode(enc110, false);
372
373 /* Enable debug symbols on the lanes */
374
375 disable_prbs_symbols(enc110, true);
376
377 /* Enable PHY bypass mode to enable the test pattern */
378 /* TODO is it really needed ? */
379
380 enable_phy_bypass_mode(enc110, true);
381
382 /* Program 80 bit custom pattern */
383 {
384 uint16_t pattern_symbols[8];
385
386 pattern_symbols[0] =
387 ((pattern[1] & 0x03) << 8) | pattern[0];
388 pattern_symbols[1] =
389 ((pattern[2] & 0x0f) << 6) | ((pattern[1] >> 2) & 0x3f);
390 pattern_symbols[2] =
391 ((pattern[3] & 0x3f) << 4) | ((pattern[2] >> 4) & 0x0f);
392 pattern_symbols[3] =
393 (pattern[4] << 2) | ((pattern[3] >> 6) & 0x03);
394 pattern_symbols[4] =
395 ((pattern[6] & 0x03) << 8) | pattern[5];
396 pattern_symbols[5] =
397 ((pattern[7] & 0x0f) << 6) | ((pattern[6] >> 2) & 0x3f);
398 pattern_symbols[6] =
399 ((pattern[8] & 0x3f) << 4) | ((pattern[7] >> 4) & 0x0f);
400 pattern_symbols[7] =
401 (pattern[9] << 2) | ((pattern[8] >> 6) & 0x03);
402
403 program_pattern_symbols(enc110, pattern_symbols);
404 }
405
406 /* Enable phy bypass mode to enable the test pattern */
407
408 enable_phy_bypass_mode(enc110, true);
409 }
410
set_dp_phy_pattern_hbr2_compliance_cp2520_2(struct dce110_link_encoder * enc110,unsigned int cp2520_pattern)411 static void set_dp_phy_pattern_hbr2_compliance_cp2520_2(
412 struct dce110_link_encoder *enc110,
413 unsigned int cp2520_pattern)
414 {
415
416 /* previously there is a register DP_HBR2_EYE_PATTERN
417 * that is enabled to get the pattern.
418 * But it does not work with the latest spec change,
419 * so we are programming the following registers manually.
420 *
421 * The following settings have been confirmed
422 * by Nick Chorney and Sandra Liu */
423
424 /* Disable PHY Bypass mode to setup the test pattern */
425
426 enable_phy_bypass_mode(enc110, false);
427
428 /* Setup DIG encoder in DP SST mode */
429 enc110->base.funcs->setup(&enc110->base, SIGNAL_TYPE_DISPLAY_PORT);
430
431 /* ensure normal panel mode. */
432 setup_panel_mode(enc110, DP_PANEL_MODE_DEFAULT);
433
434 /* no vbid after BS (SR)
435 * DP_LINK_FRAMING_CNTL changed history Sandra Liu
436 * 11000260 / 11000104 / 110000FC */
437 REG_UPDATE_3(DP_LINK_FRAMING_CNTL,
438 DP_IDLE_BS_INTERVAL, 0xFC,
439 DP_VBID_DISABLE, 1,
440 DP_VID_ENHANCED_FRAME_MODE, 1);
441
442 /* swap every BS with SR */
443 REG_UPDATE(DP_DPHY_SCRAM_CNTL, DPHY_SCRAMBLER_BS_COUNT, 0);
444
445 /* select cp2520 patterns */
446 if (REG(DP_DPHY_HBR2_PATTERN_CONTROL))
447 REG_UPDATE(DP_DPHY_HBR2_PATTERN_CONTROL,
448 DP_DPHY_HBR2_PATTERN_CONTROL, cp2520_pattern);
449 else
450 /* pre-DCE11 can only generate CP2520 pattern 2 */
451 ASSERT(cp2520_pattern == 2);
452
453 /* set link training complete */
454 set_link_training_complete(enc110, true);
455
456 /* disable video stream */
457 REG_UPDATE(DP_VID_STREAM_CNTL, DP_VID_STREAM_ENABLE, 0);
458
459 /* Disable PHY Bypass mode to setup the test pattern */
460 enable_phy_bypass_mode(enc110, false);
461 }
462
463 #if defined(CONFIG_DRM_AMD_DC_SI)
dce60_set_dp_phy_pattern_hbr2_compliance_cp2520_2(struct dce110_link_encoder * enc110,unsigned int cp2520_pattern)464 static void dce60_set_dp_phy_pattern_hbr2_compliance_cp2520_2(
465 struct dce110_link_encoder *enc110,
466 unsigned int cp2520_pattern)
467 {
468
469 /* previously there is a register DP_HBR2_EYE_PATTERN
470 * that is enabled to get the pattern.
471 * But it does not work with the latest spec change,
472 * so we are programming the following registers manually.
473 *
474 * The following settings have been confirmed
475 * by Nick Chorney and Sandra Liu */
476
477 /* Disable PHY Bypass mode to setup the test pattern */
478
479 enable_phy_bypass_mode(enc110, false);
480
481 /* Setup DIG encoder in DP SST mode */
482 enc110->base.funcs->setup(&enc110->base, SIGNAL_TYPE_DISPLAY_PORT);
483
484 /* ensure normal panel mode. */
485 setup_panel_mode(enc110, DP_PANEL_MODE_DEFAULT);
486
487 /* no vbid after BS (SR)
488 * DP_LINK_FRAMING_CNTL changed history Sandra Liu
489 * 11000260 / 11000104 / 110000FC */
490 REG_UPDATE_3(DP_LINK_FRAMING_CNTL,
491 DP_IDLE_BS_INTERVAL, 0xFC,
492 DP_VBID_DISABLE, 1,
493 DP_VID_ENHANCED_FRAME_MODE, 1);
494
495 /* DCE6 has no DP_DPHY_SCRAM_CNTL register, skip swap BS with SR */
496
497 /* select cp2520 patterns */
498 if (REG(DP_DPHY_HBR2_PATTERN_CONTROL))
499 REG_UPDATE(DP_DPHY_HBR2_PATTERN_CONTROL,
500 DP_DPHY_HBR2_PATTERN_CONTROL, cp2520_pattern);
501 else
502 /* pre-DCE11 can only generate CP2520 pattern 2 */
503 ASSERT(cp2520_pattern == 2);
504
505 /* set link training complete */
506 set_link_training_complete(enc110, true);
507
508 /* disable video stream */
509 REG_UPDATE(DP_VID_STREAM_CNTL, DP_VID_STREAM_ENABLE, 0);
510
511 /* Disable PHY Bypass mode to setup the test pattern */
512 enable_phy_bypass_mode(enc110, false);
513 }
514 #endif
515
set_dp_phy_pattern_passthrough_mode(struct dce110_link_encoder * enc110,enum dp_panel_mode panel_mode)516 static void set_dp_phy_pattern_passthrough_mode(
517 struct dce110_link_encoder *enc110,
518 enum dp_panel_mode panel_mode)
519 {
520 /* program correct panel mode */
521 setup_panel_mode(enc110, panel_mode);
522
523 /* restore LINK_FRAMING_CNTL and DPHY_SCRAMBLER_BS_COUNT
524 * in case we were doing HBR2 compliance pattern before
525 */
526 REG_UPDATE_3(DP_LINK_FRAMING_CNTL,
527 DP_IDLE_BS_INTERVAL, 0x2000,
528 DP_VBID_DISABLE, 0,
529 DP_VID_ENHANCED_FRAME_MODE, 1);
530
531 REG_UPDATE(DP_DPHY_SCRAM_CNTL, DPHY_SCRAMBLER_BS_COUNT, 0x1FF);
532
533 /* set link training complete */
534 set_link_training_complete(enc110, true);
535
536 /* Disable PHY Bypass mode to setup the test pattern */
537 enable_phy_bypass_mode(enc110, false);
538
539 /* Disable PRBS mode */
540 disable_prbs_mode(enc110);
541 }
542
543 #if defined(CONFIG_DRM_AMD_DC_SI)
dce60_set_dp_phy_pattern_passthrough_mode(struct dce110_link_encoder * enc110,enum dp_panel_mode panel_mode)544 static void dce60_set_dp_phy_pattern_passthrough_mode(
545 struct dce110_link_encoder *enc110,
546 enum dp_panel_mode panel_mode)
547 {
548 /* program correct panel mode */
549 setup_panel_mode(enc110, panel_mode);
550
551 /* restore LINK_FRAMING_CNTL
552 * in case we were doing HBR2 compliance pattern before
553 */
554 REG_UPDATE_3(DP_LINK_FRAMING_CNTL,
555 DP_IDLE_BS_INTERVAL, 0x2000,
556 DP_VBID_DISABLE, 0,
557 DP_VID_ENHANCED_FRAME_MODE, 1);
558
559 /* DCE6 has no DP_DPHY_SCRAM_CNTL register, skip DPHY_SCRAMBLER_BS_COUNT restore */
560
561 /* set link training complete */
562 set_link_training_complete(enc110, true);
563
564 /* Disable PHY Bypass mode to setup the test pattern */
565 enable_phy_bypass_mode(enc110, false);
566
567 /* Disable PRBS mode */
568 disable_prbs_mode(enc110);
569 }
570 #endif
571
572 /* return value is bit-vector */
get_frontend_source(enum engine_id engine)573 static uint8_t get_frontend_source(
574 enum engine_id engine)
575 {
576 switch (engine) {
577 case ENGINE_ID_DIGA:
578 return DCE110_DIG_FE_SOURCE_SELECT_DIGA;
579 case ENGINE_ID_DIGB:
580 return DCE110_DIG_FE_SOURCE_SELECT_DIGB;
581 case ENGINE_ID_DIGC:
582 return DCE110_DIG_FE_SOURCE_SELECT_DIGC;
583 case ENGINE_ID_DIGD:
584 return DCE110_DIG_FE_SOURCE_SELECT_DIGD;
585 case ENGINE_ID_DIGE:
586 return DCE110_DIG_FE_SOURCE_SELECT_DIGE;
587 case ENGINE_ID_DIGF:
588 return DCE110_DIG_FE_SOURCE_SELECT_DIGF;
589 case ENGINE_ID_DIGG:
590 return DCE110_DIG_FE_SOURCE_SELECT_DIGG;
591 default:
592 ASSERT_CRITICAL(false);
593 return DCE110_DIG_FE_SOURCE_SELECT_INVALID;
594 }
595 }
596
configure_encoder(struct dce110_link_encoder * enc110,const struct dc_link_settings * link_settings)597 static void configure_encoder(
598 struct dce110_link_encoder *enc110,
599 const struct dc_link_settings *link_settings)
600 {
601 /* set number of lanes */
602
603 REG_SET(DP_CONFIG, 0,
604 DP_UDI_LANES, link_settings->lane_count - LANE_COUNT_ONE);
605
606 /* setup scrambler */
607 REG_UPDATE(DP_DPHY_SCRAM_CNTL, DPHY_SCRAMBLER_ADVANCE, 1);
608 }
609
610 #if defined(CONFIG_DRM_AMD_DC_SI)
dce60_configure_encoder(struct dce110_link_encoder * enc110,const struct dc_link_settings * link_settings)611 static void dce60_configure_encoder(
612 struct dce110_link_encoder *enc110,
613 const struct dc_link_settings *link_settings)
614 {
615 /* set number of lanes */
616
617 REG_SET(DP_CONFIG, 0,
618 DP_UDI_LANES, link_settings->lane_count - LANE_COUNT_ONE);
619
620 /* DCE6 has no DP_DPHY_SCRAM_CNTL register, skip setup scrambler */
621 }
622 #endif
623
aux_initialize(struct dce110_link_encoder * enc110)624 static void aux_initialize(
625 struct dce110_link_encoder *enc110)
626 {
627 struct dc_context *ctx = enc110->base.ctx;
628 enum hpd_source_id hpd_source = enc110->base.hpd_source;
629 uint32_t addr = AUX_REG(AUX_CONTROL);
630 uint32_t value = dm_read_reg(ctx, addr);
631
632 set_reg_field_value(value, hpd_source, AUX_CONTROL, AUX_HPD_SEL);
633 set_reg_field_value(value, 0, AUX_CONTROL, AUX_LS_READ_EN);
634 dm_write_reg(ctx, addr, value);
635
636 addr = AUX_REG(AUX_DPHY_RX_CONTROL0);
637 value = dm_read_reg(ctx, addr);
638
639 /* 1/4 window (the maximum allowed) */
640 set_reg_field_value(value, 1,
641 AUX_DPHY_RX_CONTROL0, AUX_RX_RECEIVE_WINDOW);
642 dm_write_reg(ctx, addr, value);
643
644 }
645
dce110_psr_program_dp_dphy_fast_training(struct link_encoder * enc,bool exit_link_training_required)646 void dce110_psr_program_dp_dphy_fast_training(struct link_encoder *enc,
647 bool exit_link_training_required)
648 {
649 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
650
651 if (exit_link_training_required)
652 REG_UPDATE(DP_DPHY_FAST_TRAINING,
653 DPHY_RX_FAST_TRAINING_CAPABLE, 1);
654 else {
655 REG_UPDATE(DP_DPHY_FAST_TRAINING,
656 DPHY_RX_FAST_TRAINING_CAPABLE, 0);
657 /*In DCE 11, we are able to pre-program a Force SR register
658 * to be able to trigger SR symbol after 5 idle patterns
659 * transmitted. Upon PSR Exit, DMCU can trigger
660 * DPHY_LOAD_BS_COUNT_START = 1. Upon writing 1 to
661 * DPHY_LOAD_BS_COUNT_START and the internal counter
662 * reaches DPHY_LOAD_BS_COUNT, the next BS symbol will be
663 * replaced by SR symbol once.
664 */
665
666 REG_UPDATE(DP_DPHY_BS_SR_SWAP_CNTL, DPHY_LOAD_BS_COUNT, 0x5);
667 }
668 }
669
dce110_psr_program_secondary_packet(struct link_encoder * enc,unsigned int sdp_transmit_line_num_deadline)670 void dce110_psr_program_secondary_packet(struct link_encoder *enc,
671 unsigned int sdp_transmit_line_num_deadline)
672 {
673 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
674
675 REG_UPDATE_2(DP_SEC_CNTL1,
676 DP_SEC_GSP0_LINE_NUM, sdp_transmit_line_num_deadline,
677 DP_SEC_GSP0_PRIORITY, 1);
678 }
679
dce110_is_dig_enabled(struct link_encoder * enc)680 bool dce110_is_dig_enabled(struct link_encoder *enc)
681 {
682 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
683 uint32_t value;
684
685 REG_GET(DIG_BE_EN_CNTL, DIG_ENABLE, &value);
686 return value;
687 }
688
link_encoder_disable(struct dce110_link_encoder * enc110)689 static void link_encoder_disable(struct dce110_link_encoder *enc110)
690 {
691 /* reset training pattern */
692 REG_SET(DP_DPHY_TRAINING_PATTERN_SEL, 0,
693 DPHY_TRAINING_PATTERN_SEL, 0);
694
695 /* reset training complete */
696 REG_UPDATE(DP_LINK_CNTL, DP_LINK_TRAINING_COMPLETE, 0);
697
698 /* reset panel mode */
699 setup_panel_mode(enc110, DP_PANEL_MODE_DEFAULT);
700 }
701
hpd_initialize(struct dce110_link_encoder * enc110)702 static void hpd_initialize(
703 struct dce110_link_encoder *enc110)
704 {
705 /* Associate HPD with DIG_BE */
706 enum hpd_source_id hpd_source = enc110->base.hpd_source;
707
708 REG_UPDATE(DIG_BE_CNTL, DIG_HPD_SELECT, hpd_source);
709 }
710
dce110_link_encoder_validate_dvi_output(const struct dce110_link_encoder * enc110,enum signal_type connector_signal,enum signal_type signal,const struct dc_crtc_timing * crtc_timing)711 bool dce110_link_encoder_validate_dvi_output(
712 const struct dce110_link_encoder *enc110,
713 enum signal_type connector_signal,
714 enum signal_type signal,
715 const struct dc_crtc_timing *crtc_timing)
716 {
717 uint32_t max_pixel_clock = TMDS_MAX_PIXEL_CLOCK;
718
719 if (signal == SIGNAL_TYPE_DVI_DUAL_LINK)
720 max_pixel_clock *= 2;
721
722 /* This handles the case of HDMI downgrade to DVI we don't want to
723 * we don't want to cap the pixel clock if the DDI is not DVI.
724 */
725 if (connector_signal != SIGNAL_TYPE_DVI_DUAL_LINK &&
726 connector_signal != SIGNAL_TYPE_DVI_SINGLE_LINK)
727 max_pixel_clock = enc110->base.features.max_hdmi_pixel_clock;
728
729 /* DVI only support RGB pixel encoding */
730 if (crtc_timing->pixel_encoding != PIXEL_ENCODING_RGB)
731 return false;
732
733 /*connect DVI via adpater's HDMI connector*/
734 if ((connector_signal == SIGNAL_TYPE_DVI_SINGLE_LINK ||
735 connector_signal == SIGNAL_TYPE_HDMI_TYPE_A) &&
736 signal != SIGNAL_TYPE_HDMI_TYPE_A &&
737 crtc_timing->pix_clk_100hz > (TMDS_MAX_PIXEL_CLOCK * 10))
738 return false;
739 if (crtc_timing->pix_clk_100hz < (TMDS_MIN_PIXEL_CLOCK * 10))
740 return false;
741
742 if (crtc_timing->pix_clk_100hz > (max_pixel_clock * 10))
743 return false;
744
745 /* DVI supports 6/8bpp single-link and 10/16bpp dual-link */
746 switch (crtc_timing->display_color_depth) {
747 case COLOR_DEPTH_666:
748 case COLOR_DEPTH_888:
749 break;
750 case COLOR_DEPTH_101010:
751 case COLOR_DEPTH_161616:
752 if (signal != SIGNAL_TYPE_DVI_DUAL_LINK)
753 return false;
754 break;
755 default:
756 return false;
757 }
758
759 return true;
760 }
761
dce110_link_encoder_validate_hdmi_output(const struct dce110_link_encoder * enc110,const struct dc_crtc_timing * crtc_timing,int adjusted_pix_clk_khz)762 static bool dce110_link_encoder_validate_hdmi_output(
763 const struct dce110_link_encoder *enc110,
764 const struct dc_crtc_timing *crtc_timing,
765 int adjusted_pix_clk_khz)
766 {
767 enum dc_color_depth max_deep_color =
768 enc110->base.features.max_hdmi_deep_color;
769
770 if (max_deep_color < crtc_timing->display_color_depth)
771 return false;
772
773 if (crtc_timing->display_color_depth < COLOR_DEPTH_888)
774 return false;
775 if (adjusted_pix_clk_khz < TMDS_MIN_PIXEL_CLOCK)
776 return false;
777
778 if ((adjusted_pix_clk_khz == 0) ||
779 (adjusted_pix_clk_khz > enc110->base.features.max_hdmi_pixel_clock))
780 return false;
781
782 /* DCE11 HW does not support 420 */
783 if (!enc110->base.features.hdmi_ycbcr420_supported &&
784 crtc_timing->pixel_encoding == PIXEL_ENCODING_YCBCR420)
785 return false;
786
787 if ((!enc110->base.features.flags.bits.HDMI_6GB_EN ||
788 enc110->base.ctx->dc->debug.hdmi20_disable) &&
789 adjusted_pix_clk_khz >= 300000)
790 return false;
791 if (enc110->base.ctx->dc->debug.hdmi20_disable &&
792 crtc_timing->pixel_encoding == PIXEL_ENCODING_YCBCR420)
793 return false;
794 return true;
795 }
796
dce110_link_encoder_validate_dp_output(const struct dce110_link_encoder * enc110,const struct dc_crtc_timing * crtc_timing)797 bool dce110_link_encoder_validate_dp_output(
798 const struct dce110_link_encoder *enc110,
799 const struct dc_crtc_timing *crtc_timing)
800 {
801 if (crtc_timing->pixel_encoding == PIXEL_ENCODING_YCBCR420)
802 return false;
803
804 return true;
805 }
806
dce110_link_encoder_construct(struct dce110_link_encoder * enc110,const struct encoder_init_data * init_data,const struct encoder_feature_support * enc_features,const struct dce110_link_enc_registers * link_regs,const struct dce110_link_enc_aux_registers * aux_regs,const struct dce110_link_enc_hpd_registers * hpd_regs)807 void dce110_link_encoder_construct(
808 struct dce110_link_encoder *enc110,
809 const struct encoder_init_data *init_data,
810 const struct encoder_feature_support *enc_features,
811 const struct dce110_link_enc_registers *link_regs,
812 const struct dce110_link_enc_aux_registers *aux_regs,
813 const struct dce110_link_enc_hpd_registers *hpd_regs)
814 {
815 struct bp_encoder_cap_info bp_cap_info = {0};
816 const struct dc_vbios_funcs *bp_funcs = init_data->ctx->dc_bios->funcs;
817 enum bp_result result = BP_RESULT_OK;
818
819 enc110->base.funcs = &dce110_lnk_enc_funcs;
820 enc110->base.ctx = init_data->ctx;
821 enc110->base.id = init_data->encoder;
822
823 enc110->base.hpd_source = init_data->hpd_source;
824 enc110->base.connector = init_data->connector;
825
826 enc110->base.preferred_engine = ENGINE_ID_UNKNOWN;
827
828 enc110->base.features = *enc_features;
829
830 enc110->base.transmitter = init_data->transmitter;
831
832 /* set the flag to indicate whether driver poll the I2C data pin
833 * while doing the DP sink detect
834 */
835
836 /* if (dal_adapter_service_is_feature_supported(as,
837 FEATURE_DP_SINK_DETECT_POLL_DATA_PIN))
838 enc110->base.features.flags.bits.
839 DP_SINK_DETECT_POLL_DATA_PIN = true;*/
840
841 enc110->base.output_signals =
842 SIGNAL_TYPE_DVI_SINGLE_LINK |
843 SIGNAL_TYPE_DVI_DUAL_LINK |
844 SIGNAL_TYPE_LVDS |
845 SIGNAL_TYPE_DISPLAY_PORT |
846 SIGNAL_TYPE_DISPLAY_PORT_MST |
847 SIGNAL_TYPE_EDP |
848 SIGNAL_TYPE_HDMI_TYPE_A;
849
850 /* For DCE 8.0 and 8.1, by design, UNIPHY is hardwired to DIG_BE.
851 * SW always assign DIG_FE 1:1 mapped to DIG_FE for non-MST UNIPHY.
852 * SW assign DIG_FE to non-MST UNIPHY first and MST last. So prefer
853 * DIG is per UNIPHY and used by SST DP, eDP, HDMI, DVI and LVDS.
854 * Prefer DIG assignment is decided by board design.
855 * For DCE 8.0, there are only max 6 UNIPHYs, we assume board design
856 * and VBIOS will filter out 7 UNIPHY for DCE 8.0.
857 * By this, adding DIGG should not hurt DCE 8.0.
858 * This will let DCE 8.1 share DCE 8.0 as much as possible
859 */
860
861 enc110->link_regs = link_regs;
862 enc110->aux_regs = aux_regs;
863 enc110->hpd_regs = hpd_regs;
864
865 switch (enc110->base.transmitter) {
866 case TRANSMITTER_UNIPHY_A:
867 enc110->base.preferred_engine = ENGINE_ID_DIGA;
868 break;
869 case TRANSMITTER_UNIPHY_B:
870 enc110->base.preferred_engine = ENGINE_ID_DIGB;
871 break;
872 case TRANSMITTER_UNIPHY_C:
873 enc110->base.preferred_engine = ENGINE_ID_DIGC;
874 break;
875 case TRANSMITTER_UNIPHY_D:
876 enc110->base.preferred_engine = ENGINE_ID_DIGD;
877 break;
878 case TRANSMITTER_UNIPHY_E:
879 enc110->base.preferred_engine = ENGINE_ID_DIGE;
880 break;
881 case TRANSMITTER_UNIPHY_F:
882 enc110->base.preferred_engine = ENGINE_ID_DIGF;
883 break;
884 case TRANSMITTER_UNIPHY_G:
885 enc110->base.preferred_engine = ENGINE_ID_DIGG;
886 break;
887 default:
888 ASSERT_CRITICAL(false);
889 enc110->base.preferred_engine = ENGINE_ID_UNKNOWN;
890 }
891
892 /* default to one to mirror Windows behavior */
893 enc110->base.features.flags.bits.HDMI_6GB_EN = 1;
894
895 result = bp_funcs->get_encoder_cap_info(enc110->base.ctx->dc_bios,
896 enc110->base.id, &bp_cap_info);
897
898 /* Override features with DCE-specific values */
899 if (BP_RESULT_OK == result) {
900 enc110->base.features.flags.bits.IS_HBR2_CAPABLE =
901 bp_cap_info.DP_HBR2_EN;
902 enc110->base.features.flags.bits.IS_HBR3_CAPABLE =
903 bp_cap_info.DP_HBR3_EN;
904 enc110->base.features.flags.bits.HDMI_6GB_EN = bp_cap_info.HDMI_6GB_EN;
905 } else {
906 DC_LOG_WARNING("%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n",
907 __func__,
908 result);
909 }
910 if (enc110->base.ctx->dc->debug.hdmi20_disable) {
911 enc110->base.features.flags.bits.HDMI_6GB_EN = 0;
912 }
913 }
914
dce110_link_encoder_validate_output_with_stream(struct link_encoder * enc,const struct dc_stream_state * stream)915 bool dce110_link_encoder_validate_output_with_stream(
916 struct link_encoder *enc,
917 const struct dc_stream_state *stream)
918 {
919 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
920 bool is_valid;
921
922 switch (stream->signal) {
923 case SIGNAL_TYPE_DVI_SINGLE_LINK:
924 case SIGNAL_TYPE_DVI_DUAL_LINK:
925 is_valid = dce110_link_encoder_validate_dvi_output(
926 enc110,
927 stream->link->connector_signal,
928 stream->signal,
929 &stream->timing);
930 break;
931 case SIGNAL_TYPE_HDMI_TYPE_A:
932 is_valid = dce110_link_encoder_validate_hdmi_output(
933 enc110,
934 &stream->timing,
935 stream->phy_pix_clk);
936 break;
937 case SIGNAL_TYPE_DISPLAY_PORT:
938 case SIGNAL_TYPE_DISPLAY_PORT_MST:
939 is_valid = dce110_link_encoder_validate_dp_output(
940 enc110, &stream->timing);
941 break;
942 case SIGNAL_TYPE_EDP:
943 case SIGNAL_TYPE_LVDS:
944 is_valid = stream->timing.pixel_encoding == PIXEL_ENCODING_RGB;
945 break;
946 case SIGNAL_TYPE_VIRTUAL:
947 is_valid = true;
948 break;
949 default:
950 is_valid = false;
951 break;
952 }
953
954 return is_valid;
955 }
956
dce110_link_encoder_hw_init(struct link_encoder * enc)957 void dce110_link_encoder_hw_init(
958 struct link_encoder *enc)
959 {
960 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
961 struct bp_transmitter_control cntl = { 0 };
962 enum bp_result result;
963
964 cntl.action = TRANSMITTER_CONTROL_INIT;
965 cntl.engine_id = ENGINE_ID_UNKNOWN;
966 cntl.transmitter = enc110->base.transmitter;
967 cntl.connector_obj_id = enc110->base.connector;
968 cntl.lanes_number = LANE_COUNT_FOUR;
969 cntl.coherent = false;
970 cntl.hpd_sel = enc110->base.hpd_source;
971
972 if (enc110->base.connector.id == CONNECTOR_ID_EDP)
973 cntl.signal = SIGNAL_TYPE_EDP;
974
975 result = link_transmitter_control(enc110, &cntl);
976
977 if (result != BP_RESULT_OK) {
978 DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
979 __func__);
980 BREAK_TO_DEBUGGER();
981 return;
982 }
983
984 if (enc110->base.connector.id == CONNECTOR_ID_LVDS) {
985 cntl.action = TRANSMITTER_CONTROL_BACKLIGHT_BRIGHTNESS;
986
987 result = link_transmitter_control(enc110, &cntl);
988
989 ASSERT(result == BP_RESULT_OK);
990
991 }
992 aux_initialize(enc110);
993
994 /* reinitialize HPD.
995 * hpd_initialize() will pass DIG_FE id to HW context.
996 * All other routine within HW context will use fe_engine_offset
997 * as DIG_FE id even caller pass DIG_FE id.
998 * So this routine must be called first. */
999 hpd_initialize(enc110);
1000 }
1001
dce110_link_encoder_destroy(struct link_encoder ** enc)1002 void dce110_link_encoder_destroy(struct link_encoder **enc)
1003 {
1004 kfree(TO_DCE110_LINK_ENC(*enc));
1005 *enc = NULL;
1006 }
1007
dce110_link_encoder_setup(struct link_encoder * enc,enum signal_type signal)1008 void dce110_link_encoder_setup(
1009 struct link_encoder *enc,
1010 enum signal_type signal)
1011 {
1012 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1013
1014 switch (signal) {
1015 case SIGNAL_TYPE_EDP:
1016 case SIGNAL_TYPE_DISPLAY_PORT:
1017 /* DP SST */
1018 REG_UPDATE(DIG_BE_CNTL, DIG_MODE, 0);
1019 break;
1020 case SIGNAL_TYPE_LVDS:
1021 /* LVDS */
1022 REG_UPDATE(DIG_BE_CNTL, DIG_MODE, 1);
1023 break;
1024 case SIGNAL_TYPE_DVI_SINGLE_LINK:
1025 case SIGNAL_TYPE_DVI_DUAL_LINK:
1026 /* TMDS-DVI */
1027 REG_UPDATE(DIG_BE_CNTL, DIG_MODE, 2);
1028 break;
1029 case SIGNAL_TYPE_HDMI_TYPE_A:
1030 /* TMDS-HDMI */
1031 REG_UPDATE(DIG_BE_CNTL, DIG_MODE, 3);
1032 break;
1033 case SIGNAL_TYPE_DISPLAY_PORT_MST:
1034 /* DP MST */
1035 REG_UPDATE(DIG_BE_CNTL, DIG_MODE, 5);
1036 break;
1037 default:
1038 ASSERT_CRITICAL(false);
1039 /* invalid mode ! */
1040 break;
1041 }
1042
1043 }
1044
1045 /* TODO: still need depth or just pass in adjusted pixel clock? */
dce110_link_encoder_enable_tmds_output(struct link_encoder * enc,enum clock_source_id clock_source,enum dc_color_depth color_depth,enum signal_type signal,uint32_t pixel_clock)1046 void dce110_link_encoder_enable_tmds_output(
1047 struct link_encoder *enc,
1048 enum clock_source_id clock_source,
1049 enum dc_color_depth color_depth,
1050 enum signal_type signal,
1051 uint32_t pixel_clock)
1052 {
1053 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1054 struct bp_transmitter_control cntl = { 0 };
1055 enum bp_result result;
1056
1057 /* Enable the PHY */
1058 cntl.connector_obj_id = enc110->base.connector;
1059 cntl.action = TRANSMITTER_CONTROL_ENABLE;
1060 cntl.engine_id = enc->preferred_engine;
1061 cntl.transmitter = enc110->base.transmitter;
1062 cntl.pll_id = clock_source;
1063 cntl.signal = signal;
1064 if (cntl.signal == SIGNAL_TYPE_DVI_DUAL_LINK)
1065 cntl.lanes_number = 8;
1066 else
1067 cntl.lanes_number = 4;
1068
1069 cntl.hpd_sel = enc110->base.hpd_source;
1070
1071 cntl.pixel_clock = pixel_clock;
1072 cntl.color_depth = color_depth;
1073
1074 result = link_transmitter_control(enc110, &cntl);
1075
1076 if (result != BP_RESULT_OK) {
1077 DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
1078 __func__);
1079 BREAK_TO_DEBUGGER();
1080 }
1081 }
1082
1083 /* TODO: still need depth or just pass in adjusted pixel clock? */
dce110_link_encoder_enable_lvds_output(struct link_encoder * enc,enum clock_source_id clock_source,uint32_t pixel_clock)1084 void dce110_link_encoder_enable_lvds_output(
1085 struct link_encoder *enc,
1086 enum clock_source_id clock_source,
1087 uint32_t pixel_clock)
1088 {
1089 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1090 struct bp_transmitter_control cntl = { 0 };
1091 enum bp_result result;
1092
1093 /* Enable the PHY */
1094 cntl.connector_obj_id = enc110->base.connector;
1095 cntl.action = TRANSMITTER_CONTROL_ENABLE;
1096 cntl.engine_id = enc->preferred_engine;
1097 cntl.transmitter = enc110->base.transmitter;
1098 cntl.pll_id = clock_source;
1099 cntl.signal = SIGNAL_TYPE_LVDS;
1100 cntl.lanes_number = 4;
1101
1102 cntl.hpd_sel = enc110->base.hpd_source;
1103
1104 cntl.pixel_clock = pixel_clock;
1105
1106 result = link_transmitter_control(enc110, &cntl);
1107
1108 if (result != BP_RESULT_OK) {
1109 DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
1110 __func__);
1111 BREAK_TO_DEBUGGER();
1112 }
1113 }
1114
1115 /* enables DP PHY output */
dce110_link_encoder_enable_dp_output(struct link_encoder * enc,const struct dc_link_settings * link_settings,enum clock_source_id clock_source)1116 void dce110_link_encoder_enable_dp_output(
1117 struct link_encoder *enc,
1118 const struct dc_link_settings *link_settings,
1119 enum clock_source_id clock_source)
1120 {
1121 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1122 struct bp_transmitter_control cntl = { 0 };
1123 enum bp_result result;
1124
1125 /* Enable the PHY */
1126
1127 /* number_of_lanes is used for pixel clock adjust,
1128 * but it's not passed to asic_control.
1129 * We need to set number of lanes manually.
1130 */
1131 configure_encoder(enc110, link_settings);
1132 cntl.connector_obj_id = enc110->base.connector;
1133 cntl.action = TRANSMITTER_CONTROL_ENABLE;
1134 cntl.engine_id = enc->preferred_engine;
1135 cntl.transmitter = enc110->base.transmitter;
1136 cntl.pll_id = clock_source;
1137 cntl.signal = SIGNAL_TYPE_DISPLAY_PORT;
1138 cntl.lanes_number = link_settings->lane_count;
1139 cntl.hpd_sel = enc110->base.hpd_source;
1140 cntl.pixel_clock = link_settings->link_rate
1141 * LINK_RATE_REF_FREQ_IN_KHZ;
1142 /* TODO: check if undefined works */
1143 cntl.color_depth = COLOR_DEPTH_UNDEFINED;
1144
1145 result = link_transmitter_control(enc110, &cntl);
1146
1147 if (result != BP_RESULT_OK) {
1148 DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
1149 __func__);
1150 BREAK_TO_DEBUGGER();
1151 }
1152 }
1153
1154 /* enables DP PHY output in MST mode */
dce110_link_encoder_enable_dp_mst_output(struct link_encoder * enc,const struct dc_link_settings * link_settings,enum clock_source_id clock_source)1155 void dce110_link_encoder_enable_dp_mst_output(
1156 struct link_encoder *enc,
1157 const struct dc_link_settings *link_settings,
1158 enum clock_source_id clock_source)
1159 {
1160 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1161 struct bp_transmitter_control cntl = { 0 };
1162 enum bp_result result;
1163
1164 /* Enable the PHY */
1165
1166 /* number_of_lanes is used for pixel clock adjust,
1167 * but it's not passed to asic_control.
1168 * We need to set number of lanes manually.
1169 */
1170 configure_encoder(enc110, link_settings);
1171
1172 cntl.action = TRANSMITTER_CONTROL_ENABLE;
1173 cntl.engine_id = ENGINE_ID_UNKNOWN;
1174 cntl.transmitter = enc110->base.transmitter;
1175 cntl.pll_id = clock_source;
1176 cntl.signal = SIGNAL_TYPE_DISPLAY_PORT_MST;
1177 cntl.lanes_number = link_settings->lane_count;
1178 cntl.hpd_sel = enc110->base.hpd_source;
1179 cntl.pixel_clock = link_settings->link_rate
1180 * LINK_RATE_REF_FREQ_IN_KHZ;
1181 /* TODO: check if undefined works */
1182 cntl.color_depth = COLOR_DEPTH_UNDEFINED;
1183
1184 result = link_transmitter_control(enc110, &cntl);
1185
1186 if (result != BP_RESULT_OK) {
1187 DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
1188 __func__);
1189 BREAK_TO_DEBUGGER();
1190 }
1191 }
1192
1193 #if defined(CONFIG_DRM_AMD_DC_SI)
1194 /* enables DP PHY output */
dce60_link_encoder_enable_dp_output(struct link_encoder * enc,const struct dc_link_settings * link_settings,enum clock_source_id clock_source)1195 static void dce60_link_encoder_enable_dp_output(
1196 struct link_encoder *enc,
1197 const struct dc_link_settings *link_settings,
1198 enum clock_source_id clock_source)
1199 {
1200 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1201 struct bp_transmitter_control cntl = { 0 };
1202 enum bp_result result;
1203
1204 /* Enable the PHY */
1205
1206 /* number_of_lanes is used for pixel clock adjust,
1207 * but it's not passed to asic_control.
1208 * We need to set number of lanes manually.
1209 */
1210 dce60_configure_encoder(enc110, link_settings);
1211 cntl.connector_obj_id = enc110->base.connector;
1212 cntl.action = TRANSMITTER_CONTROL_ENABLE;
1213 cntl.engine_id = enc->preferred_engine;
1214 cntl.transmitter = enc110->base.transmitter;
1215 cntl.pll_id = clock_source;
1216 cntl.signal = SIGNAL_TYPE_DISPLAY_PORT;
1217 cntl.lanes_number = link_settings->lane_count;
1218 cntl.hpd_sel = enc110->base.hpd_source;
1219 cntl.pixel_clock = link_settings->link_rate
1220 * LINK_RATE_REF_FREQ_IN_KHZ;
1221 /* TODO: check if undefined works */
1222 cntl.color_depth = COLOR_DEPTH_UNDEFINED;
1223
1224 result = link_transmitter_control(enc110, &cntl);
1225
1226 if (result != BP_RESULT_OK) {
1227 DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
1228 __func__);
1229 BREAK_TO_DEBUGGER();
1230 }
1231 }
1232
1233 /* enables DP PHY output in MST mode */
dce60_link_encoder_enable_dp_mst_output(struct link_encoder * enc,const struct dc_link_settings * link_settings,enum clock_source_id clock_source)1234 static void dce60_link_encoder_enable_dp_mst_output(
1235 struct link_encoder *enc,
1236 const struct dc_link_settings *link_settings,
1237 enum clock_source_id clock_source)
1238 {
1239 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1240 struct bp_transmitter_control cntl = { 0 };
1241 enum bp_result result;
1242
1243 /* Enable the PHY */
1244
1245 /* number_of_lanes is used for pixel clock adjust,
1246 * but it's not passed to asic_control.
1247 * We need to set number of lanes manually.
1248 */
1249 dce60_configure_encoder(enc110, link_settings);
1250
1251 cntl.action = TRANSMITTER_CONTROL_ENABLE;
1252 cntl.engine_id = ENGINE_ID_UNKNOWN;
1253 cntl.transmitter = enc110->base.transmitter;
1254 cntl.pll_id = clock_source;
1255 cntl.signal = SIGNAL_TYPE_DISPLAY_PORT_MST;
1256 cntl.lanes_number = link_settings->lane_count;
1257 cntl.hpd_sel = enc110->base.hpd_source;
1258 cntl.pixel_clock = link_settings->link_rate
1259 * LINK_RATE_REF_FREQ_IN_KHZ;
1260 /* TODO: check if undefined works */
1261 cntl.color_depth = COLOR_DEPTH_UNDEFINED;
1262
1263 result = link_transmitter_control(enc110, &cntl);
1264
1265 if (result != BP_RESULT_OK) {
1266 DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
1267 __func__);
1268 BREAK_TO_DEBUGGER();
1269 }
1270 }
1271 #endif
1272
1273 /*
1274 * @brief
1275 * Disable transmitter and its encoder
1276 */
dce110_link_encoder_disable_output(struct link_encoder * enc,enum signal_type signal)1277 void dce110_link_encoder_disable_output(
1278 struct link_encoder *enc,
1279 enum signal_type signal)
1280 {
1281 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1282 struct bp_transmitter_control cntl = { 0 };
1283 enum bp_result result;
1284
1285 if (!dce110_is_dig_enabled(enc)) {
1286 /* OF_SKIP_POWER_DOWN_INACTIVE_ENCODER */
1287 return;
1288 }
1289 /* Power-down RX and disable GPU PHY should be paired.
1290 * Disabling PHY without powering down RX may cause
1291 * symbol lock loss, on which we will get DP Sink interrupt. */
1292
1293 /* There is a case for the DP active dongles
1294 * where we want to disable the PHY but keep RX powered,
1295 * for those we need to ignore DP Sink interrupt
1296 * by checking lane count that has been set
1297 * on the last do_enable_output(). */
1298
1299 /* disable transmitter */
1300 cntl.action = TRANSMITTER_CONTROL_DISABLE;
1301 cntl.transmitter = enc110->base.transmitter;
1302 cntl.hpd_sel = enc110->base.hpd_source;
1303 cntl.signal = signal;
1304 cntl.connector_obj_id = enc110->base.connector;
1305
1306 result = link_transmitter_control(enc110, &cntl);
1307
1308 if (result != BP_RESULT_OK) {
1309 DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
1310 __func__);
1311 BREAK_TO_DEBUGGER();
1312 return;
1313 }
1314
1315 /* disable encoder */
1316 if (dc_is_dp_signal(signal))
1317 link_encoder_disable(enc110);
1318 }
1319
dce110_link_encoder_dp_set_lane_settings(struct link_encoder * enc,const struct dc_link_settings * link_settings,const struct dc_lane_settings lane_settings[LANE_COUNT_DP_MAX])1320 void dce110_link_encoder_dp_set_lane_settings(
1321 struct link_encoder *enc,
1322 const struct dc_link_settings *link_settings,
1323 const struct dc_lane_settings lane_settings[LANE_COUNT_DP_MAX])
1324 {
1325 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1326 union dpcd_training_lane_set training_lane_set = { { 0 } };
1327 int32_t lane = 0;
1328 struct bp_transmitter_control cntl = { 0 };
1329
1330 if (!link_settings) {
1331 BREAK_TO_DEBUGGER();
1332 return;
1333 }
1334
1335 cntl.action = TRANSMITTER_CONTROL_SET_VOLTAGE_AND_PREEMPASIS;
1336 cntl.transmitter = enc110->base.transmitter;
1337 cntl.connector_obj_id = enc110->base.connector;
1338 cntl.lanes_number = link_settings->lane_count;
1339 cntl.hpd_sel = enc110->base.hpd_source;
1340 cntl.pixel_clock = link_settings->link_rate *
1341 LINK_RATE_REF_FREQ_IN_KHZ;
1342
1343 for (lane = 0; lane < link_settings->lane_count; lane++) {
1344 /* translate lane settings */
1345
1346 training_lane_set.bits.VOLTAGE_SWING_SET =
1347 lane_settings[lane].VOLTAGE_SWING;
1348 training_lane_set.bits.PRE_EMPHASIS_SET =
1349 lane_settings[lane].PRE_EMPHASIS;
1350
1351 /* post cursor 2 setting only applies to HBR2 link rate */
1352 if (link_settings->link_rate == LINK_RATE_HIGH2) {
1353 /* this is passed to VBIOS
1354 * to program post cursor 2 level */
1355
1356 training_lane_set.bits.POST_CURSOR2_SET =
1357 lane_settings[lane].POST_CURSOR2;
1358 }
1359
1360 cntl.lane_select = lane;
1361 cntl.lane_settings = training_lane_set.raw;
1362
1363 /* call VBIOS table to set voltage swing and pre-emphasis */
1364 link_transmitter_control(enc110, &cntl);
1365 }
1366 }
1367
1368 /* set DP PHY test and training patterns */
dce110_link_encoder_dp_set_phy_pattern(struct link_encoder * enc,const struct encoder_set_dp_phy_pattern_param * param)1369 void dce110_link_encoder_dp_set_phy_pattern(
1370 struct link_encoder *enc,
1371 const struct encoder_set_dp_phy_pattern_param *param)
1372 {
1373 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1374
1375 switch (param->dp_phy_pattern) {
1376 case DP_TEST_PATTERN_TRAINING_PATTERN1:
1377 dce110_link_encoder_set_dp_phy_pattern_training_pattern(enc, 0);
1378 break;
1379 case DP_TEST_PATTERN_TRAINING_PATTERN2:
1380 dce110_link_encoder_set_dp_phy_pattern_training_pattern(enc, 1);
1381 break;
1382 case DP_TEST_PATTERN_TRAINING_PATTERN3:
1383 dce110_link_encoder_set_dp_phy_pattern_training_pattern(enc, 2);
1384 break;
1385 case DP_TEST_PATTERN_TRAINING_PATTERN4:
1386 dce110_link_encoder_set_dp_phy_pattern_training_pattern(enc, 3);
1387 break;
1388 case DP_TEST_PATTERN_D102:
1389 set_dp_phy_pattern_d102(enc110);
1390 break;
1391 case DP_TEST_PATTERN_SYMBOL_ERROR:
1392 set_dp_phy_pattern_symbol_error(enc110);
1393 break;
1394 case DP_TEST_PATTERN_PRBS7:
1395 set_dp_phy_pattern_prbs7(enc110);
1396 break;
1397 case DP_TEST_PATTERN_80BIT_CUSTOM:
1398 set_dp_phy_pattern_80bit_custom(
1399 enc110, param->custom_pattern);
1400 break;
1401 case DP_TEST_PATTERN_CP2520_1:
1402 set_dp_phy_pattern_hbr2_compliance_cp2520_2(enc110, 1);
1403 break;
1404 case DP_TEST_PATTERN_CP2520_2:
1405 set_dp_phy_pattern_hbr2_compliance_cp2520_2(enc110, 2);
1406 break;
1407 case DP_TEST_PATTERN_CP2520_3:
1408 set_dp_phy_pattern_hbr2_compliance_cp2520_2(enc110, 3);
1409 break;
1410 case DP_TEST_PATTERN_VIDEO_MODE: {
1411 set_dp_phy_pattern_passthrough_mode(
1412 enc110, param->dp_panel_mode);
1413 break;
1414 }
1415
1416 default:
1417 /* invalid phy pattern */
1418 ASSERT_CRITICAL(false);
1419 break;
1420 }
1421 }
1422
1423 #if defined(CONFIG_DRM_AMD_DC_SI)
1424 /* set DP PHY test and training patterns */
dce60_link_encoder_dp_set_phy_pattern(struct link_encoder * enc,const struct encoder_set_dp_phy_pattern_param * param)1425 static void dce60_link_encoder_dp_set_phy_pattern(
1426 struct link_encoder *enc,
1427 const struct encoder_set_dp_phy_pattern_param *param)
1428 {
1429 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1430
1431 switch (param->dp_phy_pattern) {
1432 case DP_TEST_PATTERN_TRAINING_PATTERN1:
1433 dce110_link_encoder_set_dp_phy_pattern_training_pattern(enc, 0);
1434 break;
1435 case DP_TEST_PATTERN_TRAINING_PATTERN2:
1436 dce110_link_encoder_set_dp_phy_pattern_training_pattern(enc, 1);
1437 break;
1438 case DP_TEST_PATTERN_TRAINING_PATTERN3:
1439 dce110_link_encoder_set_dp_phy_pattern_training_pattern(enc, 2);
1440 break;
1441 case DP_TEST_PATTERN_TRAINING_PATTERN4:
1442 dce110_link_encoder_set_dp_phy_pattern_training_pattern(enc, 3);
1443 break;
1444 case DP_TEST_PATTERN_D102:
1445 set_dp_phy_pattern_d102(enc110);
1446 break;
1447 case DP_TEST_PATTERN_SYMBOL_ERROR:
1448 set_dp_phy_pattern_symbol_error(enc110);
1449 break;
1450 case DP_TEST_PATTERN_PRBS7:
1451 set_dp_phy_pattern_prbs7(enc110);
1452 break;
1453 case DP_TEST_PATTERN_80BIT_CUSTOM:
1454 set_dp_phy_pattern_80bit_custom(
1455 enc110, param->custom_pattern);
1456 break;
1457 case DP_TEST_PATTERN_CP2520_1:
1458 dce60_set_dp_phy_pattern_hbr2_compliance_cp2520_2(enc110, 1);
1459 break;
1460 case DP_TEST_PATTERN_CP2520_2:
1461 dce60_set_dp_phy_pattern_hbr2_compliance_cp2520_2(enc110, 2);
1462 break;
1463 case DP_TEST_PATTERN_CP2520_3:
1464 dce60_set_dp_phy_pattern_hbr2_compliance_cp2520_2(enc110, 3);
1465 break;
1466 case DP_TEST_PATTERN_VIDEO_MODE: {
1467 dce60_set_dp_phy_pattern_passthrough_mode(
1468 enc110, param->dp_panel_mode);
1469 break;
1470 }
1471
1472 default:
1473 /* invalid phy pattern */
1474 ASSERT_CRITICAL(false);
1475 break;
1476 }
1477 }
1478 #endif
1479
fill_stream_allocation_row_info(const struct link_mst_stream_allocation * stream_allocation,uint32_t * src,uint32_t * slots)1480 static void fill_stream_allocation_row_info(
1481 const struct link_mst_stream_allocation *stream_allocation,
1482 uint32_t *src,
1483 uint32_t *slots)
1484 {
1485 const struct stream_encoder *stream_enc = stream_allocation->stream_enc;
1486
1487 if (stream_enc) {
1488 *src = stream_enc->id;
1489 *slots = stream_allocation->slot_count;
1490 } else {
1491 *src = 0;
1492 *slots = 0;
1493 }
1494 }
1495
1496 /* programs DP MST VC payload allocation */
dce110_link_encoder_update_mst_stream_allocation_table(struct link_encoder * enc,const struct link_mst_stream_allocation_table * table)1497 void dce110_link_encoder_update_mst_stream_allocation_table(
1498 struct link_encoder *enc,
1499 const struct link_mst_stream_allocation_table *table)
1500 {
1501 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1502 uint32_t value1 = 0;
1503 uint32_t value2 = 0;
1504 uint32_t slots = 0;
1505 uint32_t src = 0;
1506 uint32_t retries = 0;
1507
1508 /* For CZ, there are only 3 pipes. So Virtual channel is up 3.*/
1509
1510 /* --- Set MSE Stream Attribute -
1511 * Setup VC Payload Table on Tx Side,
1512 * Issue allocation change trigger
1513 * to commit payload on both tx and rx side */
1514
1515 /* we should clean-up table each time */
1516
1517 if (table->stream_count >= 1) {
1518 fill_stream_allocation_row_info(
1519 &table->stream_allocations[0],
1520 &src,
1521 &slots);
1522 } else {
1523 src = 0;
1524 slots = 0;
1525 }
1526
1527 REG_UPDATE_2(DP_MSE_SAT0,
1528 DP_MSE_SAT_SRC0, src,
1529 DP_MSE_SAT_SLOT_COUNT0, slots);
1530
1531 if (table->stream_count >= 2) {
1532 fill_stream_allocation_row_info(
1533 &table->stream_allocations[1],
1534 &src,
1535 &slots);
1536 } else {
1537 src = 0;
1538 slots = 0;
1539 }
1540
1541 REG_UPDATE_2(DP_MSE_SAT0,
1542 DP_MSE_SAT_SRC1, src,
1543 DP_MSE_SAT_SLOT_COUNT1, slots);
1544
1545 if (table->stream_count >= 3) {
1546 fill_stream_allocation_row_info(
1547 &table->stream_allocations[2],
1548 &src,
1549 &slots);
1550 } else {
1551 src = 0;
1552 slots = 0;
1553 }
1554
1555 REG_UPDATE_2(DP_MSE_SAT1,
1556 DP_MSE_SAT_SRC2, src,
1557 DP_MSE_SAT_SLOT_COUNT2, slots);
1558
1559 if (table->stream_count >= 4) {
1560 fill_stream_allocation_row_info(
1561 &table->stream_allocations[3],
1562 &src,
1563 &slots);
1564 } else {
1565 src = 0;
1566 slots = 0;
1567 }
1568
1569 REG_UPDATE_2(DP_MSE_SAT1,
1570 DP_MSE_SAT_SRC3, src,
1571 DP_MSE_SAT_SLOT_COUNT3, slots);
1572
1573 /* --- wait for transaction finish */
1574
1575 /* send allocation change trigger (ACT) ?
1576 * this step first sends the ACT,
1577 * then double buffers the SAT into the hardware
1578 * making the new allocation active on the DP MST mode link */
1579
1580
1581 /* DP_MSE_SAT_UPDATE:
1582 * 0 - No Action
1583 * 1 - Update SAT with trigger
1584 * 2 - Update SAT without trigger */
1585
1586 REG_UPDATE(DP_MSE_SAT_UPDATE,
1587 DP_MSE_SAT_UPDATE, 1);
1588
1589 /* wait for update to complete
1590 * (i.e. DP_MSE_SAT_UPDATE field is reset to 0)
1591 * then wait for the transmission
1592 * of at least 16 MTP headers on immediate local link.
1593 * i.e. DP_MSE_16_MTP_KEEPOUT field (read only) is reset to 0
1594 * a value of 1 indicates that DP MST mode
1595 * is in the 16 MTP keepout region after a VC has been added.
1596 * MST stream bandwidth (VC rate) can be configured
1597 * after this bit is cleared */
1598
1599 do {
1600 udelay(10);
1601
1602 REG_READ(DP_MSE_SAT_UPDATE);
1603
1604 REG_GET(DP_MSE_SAT_UPDATE,
1605 DP_MSE_SAT_UPDATE, &value1);
1606
1607 REG_GET(DP_MSE_SAT_UPDATE,
1608 DP_MSE_16_MTP_KEEPOUT, &value2);
1609
1610 /* bit field DP_MSE_SAT_UPDATE is set to 1 already */
1611 if (!value1 && !value2)
1612 break;
1613 ++retries;
1614 } while (retries < DP_MST_UPDATE_MAX_RETRY);
1615 }
1616
dce110_link_encoder_connect_dig_be_to_fe(struct link_encoder * enc,enum engine_id engine,bool connect)1617 void dce110_link_encoder_connect_dig_be_to_fe(
1618 struct link_encoder *enc,
1619 enum engine_id engine,
1620 bool connect)
1621 {
1622 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1623 uint32_t field;
1624
1625 if (engine != ENGINE_ID_UNKNOWN) {
1626
1627 REG_GET(DIG_BE_CNTL, DIG_FE_SOURCE_SELECT, &field);
1628
1629 if (connect)
1630 field |= get_frontend_source(engine);
1631 else
1632 field &= ~get_frontend_source(engine);
1633
1634 REG_UPDATE(DIG_BE_CNTL, DIG_FE_SOURCE_SELECT, field);
1635 }
1636 }
1637
dce110_link_encoder_enable_hpd(struct link_encoder * enc)1638 void dce110_link_encoder_enable_hpd(struct link_encoder *enc)
1639 {
1640 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1641 struct dc_context *ctx = enc110->base.ctx;
1642 uint32_t addr = HPD_REG(DC_HPD_CONTROL);
1643 uint32_t hpd_enable = 0;
1644 uint32_t value = dm_read_reg(ctx, addr);
1645
1646 hpd_enable = get_reg_field_value(hpd_enable, DC_HPD_CONTROL, DC_HPD_EN);
1647
1648 if (hpd_enable == 0)
1649 set_reg_field_value(value, 1, DC_HPD_CONTROL, DC_HPD_EN);
1650 }
1651
dce110_link_encoder_disable_hpd(struct link_encoder * enc)1652 void dce110_link_encoder_disable_hpd(struct link_encoder *enc)
1653 {
1654 struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc);
1655 struct dc_context *ctx = enc110->base.ctx;
1656 uint32_t addr = HPD_REG(DC_HPD_CONTROL);
1657 uint32_t value = dm_read_reg(ctx, addr);
1658
1659 set_reg_field_value(value, 0, DC_HPD_CONTROL, DC_HPD_EN);
1660 }
1661
dce110_link_encoder_get_max_link_cap(struct link_encoder * enc,struct dc_link_settings * link_settings)1662 void dce110_link_encoder_get_max_link_cap(struct link_encoder *enc,
1663 struct dc_link_settings *link_settings)
1664 {
1665 /* Set Default link settings */
1666 struct dc_link_settings max_link_cap = {LANE_COUNT_FOUR, LINK_RATE_HIGH,
1667 LINK_SPREAD_05_DOWNSPREAD_30KHZ, false, 0};
1668
1669 /* Higher link settings based on feature supported */
1670 if (enc->features.flags.bits.IS_HBR2_CAPABLE)
1671 max_link_cap.link_rate = LINK_RATE_HIGH2;
1672
1673 if (enc->features.flags.bits.IS_HBR3_CAPABLE)
1674 max_link_cap.link_rate = LINK_RATE_HIGH3;
1675
1676 *link_settings = max_link_cap;
1677 }
1678
1679 #if defined(CONFIG_DRM_AMD_DC_SI)
1680 static const struct link_encoder_funcs dce60_lnk_enc_funcs = {
1681 .validate_output_with_stream =
1682 dce110_link_encoder_validate_output_with_stream,
1683 .hw_init = dce110_link_encoder_hw_init,
1684 .setup = dce110_link_encoder_setup,
1685 .enable_tmds_output = dce110_link_encoder_enable_tmds_output,
1686 .enable_dp_output = dce60_link_encoder_enable_dp_output,
1687 .enable_dp_mst_output = dce60_link_encoder_enable_dp_mst_output,
1688 .enable_lvds_output = dce110_link_encoder_enable_lvds_output,
1689 .disable_output = dce110_link_encoder_disable_output,
1690 .dp_set_lane_settings = dce110_link_encoder_dp_set_lane_settings,
1691 .dp_set_phy_pattern = dce60_link_encoder_dp_set_phy_pattern,
1692 .update_mst_stream_allocation_table =
1693 dce110_link_encoder_update_mst_stream_allocation_table,
1694 .psr_program_dp_dphy_fast_training =
1695 dce110_psr_program_dp_dphy_fast_training,
1696 .psr_program_secondary_packet = dce110_psr_program_secondary_packet,
1697 .connect_dig_be_to_fe = dce110_link_encoder_connect_dig_be_to_fe,
1698 .enable_hpd = dce110_link_encoder_enable_hpd,
1699 .disable_hpd = dce110_link_encoder_disable_hpd,
1700 .is_dig_enabled = dce110_is_dig_enabled,
1701 .destroy = dce110_link_encoder_destroy,
1702 .get_max_link_cap = dce110_link_encoder_get_max_link_cap,
1703 .get_dig_frontend = dce110_get_dig_frontend
1704 };
1705
dce60_link_encoder_construct(struct dce110_link_encoder * enc110,const struct encoder_init_data * init_data,const struct encoder_feature_support * enc_features,const struct dce110_link_enc_registers * link_regs,const struct dce110_link_enc_aux_registers * aux_regs,const struct dce110_link_enc_hpd_registers * hpd_regs)1706 void dce60_link_encoder_construct(
1707 struct dce110_link_encoder *enc110,
1708 const struct encoder_init_data *init_data,
1709 const struct encoder_feature_support *enc_features,
1710 const struct dce110_link_enc_registers *link_regs,
1711 const struct dce110_link_enc_aux_registers *aux_regs,
1712 const struct dce110_link_enc_hpd_registers *hpd_regs)
1713 {
1714 struct bp_encoder_cap_info bp_cap_info = {0};
1715 const struct dc_vbios_funcs *bp_funcs = init_data->ctx->dc_bios->funcs;
1716 enum bp_result result = BP_RESULT_OK;
1717
1718 enc110->base.funcs = &dce60_lnk_enc_funcs;
1719 enc110->base.ctx = init_data->ctx;
1720 enc110->base.id = init_data->encoder;
1721
1722 enc110->base.hpd_source = init_data->hpd_source;
1723 enc110->base.connector = init_data->connector;
1724
1725 enc110->base.preferred_engine = ENGINE_ID_UNKNOWN;
1726
1727 enc110->base.features = *enc_features;
1728
1729 enc110->base.transmitter = init_data->transmitter;
1730
1731 /* set the flag to indicate whether driver poll the I2C data pin
1732 * while doing the DP sink detect
1733 */
1734
1735 /* if (dal_adapter_service_is_feature_supported(as,
1736 FEATURE_DP_SINK_DETECT_POLL_DATA_PIN))
1737 enc110->base.features.flags.bits.
1738 DP_SINK_DETECT_POLL_DATA_PIN = true;*/
1739
1740 enc110->base.output_signals =
1741 SIGNAL_TYPE_DVI_SINGLE_LINK |
1742 SIGNAL_TYPE_DVI_DUAL_LINK |
1743 SIGNAL_TYPE_LVDS |
1744 SIGNAL_TYPE_DISPLAY_PORT |
1745 SIGNAL_TYPE_DISPLAY_PORT_MST |
1746 SIGNAL_TYPE_EDP |
1747 SIGNAL_TYPE_HDMI_TYPE_A;
1748
1749 /* For DCE 8.0 and 8.1, by design, UNIPHY is hardwired to DIG_BE.
1750 * SW always assign DIG_FE 1:1 mapped to DIG_FE for non-MST UNIPHY.
1751 * SW assign DIG_FE to non-MST UNIPHY first and MST last. So prefer
1752 * DIG is per UNIPHY and used by SST DP, eDP, HDMI, DVI and LVDS.
1753 * Prefer DIG assignment is decided by board design.
1754 * For DCE 8.0, there are only max 6 UNIPHYs, we assume board design
1755 * and VBIOS will filter out 7 UNIPHY for DCE 8.0.
1756 * By this, adding DIGG should not hurt DCE 8.0.
1757 * This will let DCE 8.1 share DCE 8.0 as much as possible
1758 */
1759
1760 enc110->link_regs = link_regs;
1761 enc110->aux_regs = aux_regs;
1762 enc110->hpd_regs = hpd_regs;
1763
1764 switch (enc110->base.transmitter) {
1765 case TRANSMITTER_UNIPHY_A:
1766 enc110->base.preferred_engine = ENGINE_ID_DIGA;
1767 break;
1768 case TRANSMITTER_UNIPHY_B:
1769 enc110->base.preferred_engine = ENGINE_ID_DIGB;
1770 break;
1771 case TRANSMITTER_UNIPHY_C:
1772 enc110->base.preferred_engine = ENGINE_ID_DIGC;
1773 break;
1774 case TRANSMITTER_UNIPHY_D:
1775 enc110->base.preferred_engine = ENGINE_ID_DIGD;
1776 break;
1777 case TRANSMITTER_UNIPHY_E:
1778 enc110->base.preferred_engine = ENGINE_ID_DIGE;
1779 break;
1780 case TRANSMITTER_UNIPHY_F:
1781 enc110->base.preferred_engine = ENGINE_ID_DIGF;
1782 break;
1783 case TRANSMITTER_UNIPHY_G:
1784 enc110->base.preferred_engine = ENGINE_ID_DIGG;
1785 break;
1786 default:
1787 ASSERT_CRITICAL(false);
1788 enc110->base.preferred_engine = ENGINE_ID_UNKNOWN;
1789 }
1790
1791 /* default to one to mirror Windows behavior */
1792 enc110->base.features.flags.bits.HDMI_6GB_EN = 1;
1793
1794 result = bp_funcs->get_encoder_cap_info(enc110->base.ctx->dc_bios,
1795 enc110->base.id, &bp_cap_info);
1796
1797 /* Override features with DCE-specific values */
1798 if (BP_RESULT_OK == result) {
1799 enc110->base.features.flags.bits.IS_HBR2_CAPABLE =
1800 bp_cap_info.DP_HBR2_EN;
1801 enc110->base.features.flags.bits.IS_HBR3_CAPABLE =
1802 bp_cap_info.DP_HBR3_EN;
1803 enc110->base.features.flags.bits.HDMI_6GB_EN = bp_cap_info.HDMI_6GB_EN;
1804 } else {
1805 DC_LOG_WARNING("%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n",
1806 __func__,
1807 result);
1808 }
1809 if (enc110->base.ctx->dc->debug.hdmi20_disable) {
1810 enc110->base.features.flags.bits.HDMI_6GB_EN = 0;
1811 }
1812 }
1813 #endif
1814