1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * include/linux/mfd/wm8994/pdata.h -- Platform data for WM8994
4  *
5  * Copyright 2009 Wolfson Microelectronics PLC.
6  *
7  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
8  */
9 
10 #ifndef __MFD_WM8994_PDATA_H__
11 #define __MFD_WM8994_PDATA_H__
12 
13 #define WM8994_NUM_LDO   2
14 #define WM8994_NUM_GPIO 11
15 #define WM8994_NUM_AIF   3
16 
17 struct wm8994_ldo_pdata {
18 	const struct regulator_init_data *init_data;
19 };
20 
21 #define WM8994_CONFIGURE_GPIO 0x10000
22 
23 #define WM8994_DRC_REGS 5
24 #define WM8994_EQ_REGS  20
25 #define WM8958_MBC_CUTOFF_REGS 20
26 #define WM8958_MBC_COEFF_REGS  48
27 #define WM8958_MBC_COMBINED_REGS 56
28 #define WM8958_VSS_HPF_REGS 2
29 #define WM8958_VSS_REGS 148
30 #define WM8958_ENH_EQ_REGS 32
31 
32 /**
33  * DRC configurations are specified with a label and a set of register
34  * values to write (the enable bits will be ignored).  At runtime an
35  * enumerated control will be presented for each DRC block allowing
36  * the user to choose the configuration to use.
37  *
38  * Configurations may be generated by hand or by using the DRC control
39  * panel provided by the WISCE - see  http://www.wolfsonmicro.com/wisce/
40  * for details.
41  */
42 struct wm8994_drc_cfg {
43         const char *name;
44         u16 regs[WM8994_DRC_REGS];
45 };
46 
47 /**
48  * ReTune Mobile configurations are specified with a label, sample
49  * rate and set of values to write (the enable bits will be ignored).
50  *
51  * Configurations are expected to be generated using the ReTune Mobile
52  * control panel in WISCE - see http://www.wolfsonmicro.com/wisce/
53  */
54 struct wm8994_retune_mobile_cfg {
55         const char *name;
56         unsigned int rate;
57         u16 regs[WM8994_EQ_REGS];
58 };
59 
60 /**
61  * Multiband compressor configurations are specified with a label and
62  * two sets of values to write.  Configurations are expected to be
63  * generated using the multiband compressor configuration panel in
64  * WISCE - see http://www.wolfsonmicro.com/wisce/
65  */
66 struct wm8958_mbc_cfg {
67 	const char *name;
68 	u16 cutoff_regs[WM8958_MBC_CUTOFF_REGS];
69 	u16 coeff_regs[WM8958_MBC_COEFF_REGS];
70 
71 	/* Coefficient layout when using MBC+VSS firmware */
72 	u16 combined_regs[WM8958_MBC_COMBINED_REGS];
73 };
74 
75 /**
76  * VSS HPF configurations are specified with a label and two values to
77  * write.  Configurations are expected to be generated using the
78  * multiband compressor configuration panel in WISCE - see
79  * http://www.wolfsonmicro.com/wisce/
80  */
81 struct wm8958_vss_hpf_cfg {
82 	const char *name;
83 	u16 regs[WM8958_VSS_HPF_REGS];
84 };
85 
86 /**
87  * VSS configurations are specified with a label and array of values
88  * to write.  Configurations are expected to be generated using the
89  * multiband compressor configuration panel in WISCE - see
90  * http://www.wolfsonmicro.com/wisce/
91  */
92 struct wm8958_vss_cfg {
93 	const char *name;
94 	u16 regs[WM8958_VSS_REGS];
95 };
96 
97 /**
98  * Enhanced EQ configurations are specified with a label and array of
99  * values to write.  Configurations are expected to be generated using
100  * the multiband compressor configuration panel in WISCE - see
101  * http://www.wolfsonmicro.com/wisce/
102  */
103 struct wm8958_enh_eq_cfg {
104 	const char *name;
105 	u16 regs[WM8958_ENH_EQ_REGS];
106 };
107 
108 /**
109  * Microphone detection rates, used to tune response rates and power
110  * consumption for WM8958/WM1811 microphone detection.
111  *
112  * @sysclk: System clock rate to use this configuration for.
113  * @idle: True if this configuration should use when no accessory is detected,
114  *        false otherwise.
115  * @start: Value for MICD_BIAS_START_TIME register field (not shifted).
116  * @rate: Value for MICD_RATE register field (not shifted).
117  */
118 struct wm8958_micd_rate {
119 	int sysclk;
120 	bool idle;
121 	int start;
122 	int rate;
123 };
124 
125 struct wm8994_pdata {
126 	int gpio_base;
127 
128 	/**
129 	 * Default values for GPIOs if non-zero, WM8994_CONFIGURE_GPIO
130 	 * can be used for all zero values.
131 	 */
132 	int gpio_defaults[WM8994_NUM_GPIO];
133 
134 	struct wm8994_ldo_pdata ldo[WM8994_NUM_LDO];
135 
136 	int irq_base;  /** Base IRQ number for WM8994, required for IRQs */
137 	unsigned long irq_flags; /** user irq flags */
138 
139         int num_drc_cfgs;
140         struct wm8994_drc_cfg *drc_cfgs;
141 
142         int num_retune_mobile_cfgs;
143         struct wm8994_retune_mobile_cfg *retune_mobile_cfgs;
144 
145 	int num_mbc_cfgs;
146 	struct wm8958_mbc_cfg *mbc_cfgs;
147 
148 	int num_vss_cfgs;
149 	struct wm8958_vss_cfg *vss_cfgs;
150 
151 	int num_vss_hpf_cfgs;
152 	struct wm8958_vss_hpf_cfg *vss_hpf_cfgs;
153 
154 	int num_enh_eq_cfgs;
155 	struct wm8958_enh_eq_cfg *enh_eq_cfgs;
156 
157 	int num_micd_rates;
158 	struct wm8958_micd_rate *micd_rates;
159 
160 	/* Power up delays to add after microphone bias power up (ms) */
161 	int micb1_delay;
162 	int micb2_delay;
163 
164         /* LINEOUT can be differential or single ended */
165         unsigned int lineout1_diff:1;
166         unsigned int lineout2_diff:1;
167 
168         /* Common mode feedback */
169         unsigned int lineout1fb:1;
170         unsigned int lineout2fb:1;
171 
172 	/* Delay between detecting a jack and starting microphone
173 	 * detect (specified in ms)
174 	 */
175 	int micdet_delay;
176 
177 	/* Delay between microphone detect completing and reporting on
178 	 * insert (specified in ms)
179 	 */
180 	int mic_id_delay;
181 
182 	/* IRQ for microphone detection if brought out directly as a
183 	 * signal.
184 	 */
185 	int micdet_irq;
186 
187         /* WM8994 microphone biases: 0=0.9*AVDD1 1=0.65*AVVD1 */
188         unsigned int micbias1_lvl:1;
189         unsigned int micbias2_lvl:1;
190 
191         /* WM8994 jack detect threashold levels, see datasheet for values */
192         unsigned int jd_scthr:2;
193         unsigned int jd_thr:2;
194 
195 	/* Configure WM1811 jack detection for use with external capacitor */
196 	unsigned int jd_ext_cap:1;
197 
198 	/* WM8958 microphone bias configuration */
199 	int micbias[2];
200 
201 	/* WM8958 microphone detection ranges */
202 	u16 micd_lvl_sel;
203 
204 	/* Disable the internal pull downs on the LDOs if they are
205 	 * always driven (eg, connected to an always on supply or
206 	 * GPIO that always drives an output.  If they float power
207 	 * consumption will rise.
208 	 */
209 	bool ldo_ena_always_driven;
210 
211 	/*
212 	 * SPKMODE must be pulled internally by the device on this
213 	 * system.
214 	 */
215 	bool spkmode_pu;
216 
217 	/*
218 	 * CS/ADDR must be pulled internally by the device on this
219 	 * system.
220 	 */
221 	bool csnaddr_pd;
222 
223 	/**
224 	 * Maximum number of channels clocks will be generated for,
225 	 * useful for systems where and I2S bus with multiple data
226 	 * lines is mastered.
227 	 */
228 	int max_channels_clocked[WM8994_NUM_AIF];
229 
230 	/**
231 	 * GPIO for the IRQ pin if host only supports edge triggering
232 	 */
233 	int irq_gpio;
234 };
235 
236 #endif
237