1 /*
2  * Remote Processor Framework
3  *
4  * Copyright(c) 2011 Texas Instruments, Inc.
5  * Copyright(c) 2011 Google, Inc.
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  *
12  * * Redistributions of source code must retain the above copyright
13  *   notice, this list of conditions and the following disclaimer.
14  * * Redistributions in binary form must reproduce the above copyright
15  *   notice, this list of conditions and the following disclaimer in
16  *   the documentation and/or other materials provided with the
17  *   distribution.
18  * * Neither the name Texas Instruments nor the names of its
19  *   contributors may be used to endorse or promote products derived
20  *   from this software without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
25  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
26  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
27  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
28  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
29  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
30  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
32  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33  */
34 
35 #ifndef REMOTEPROC_H
36 #define REMOTEPROC_H
37 
38 #include <linux/types.h>
39 #include <linux/mutex.h>
40 #include <linux/virtio.h>
41 #include <linux/cdev.h>
42 #include <linux/completion.h>
43 #include <linux/idr.h>
44 #include <linux/of.h>
45 
46 /**
47  * struct resource_table - firmware resource table header
48  * @ver: version number
49  * @num: number of resource entries
50  * @reserved: reserved (must be zero)
51  * @offset: array of offsets pointing at the various resource entries
52  *
53  * A resource table is essentially a list of system resources required
54  * by the remote processor. It may also include configuration entries.
55  * If needed, the remote processor firmware should contain this table
56  * as a dedicated ".resource_table" ELF section.
57  *
58  * Some resources entries are mere announcements, where the host is informed
59  * of specific remoteproc configuration. Other entries require the host to
60  * do something (e.g. allocate a system resource). Sometimes a negotiation
61  * is expected, where the firmware requests a resource, and once allocated,
62  * the host should provide back its details (e.g. address of an allocated
63  * memory region).
64  *
65  * The header of the resource table, as expressed by this structure,
66  * contains a version number (should we need to change this format in the
67  * future), the number of available resource entries, and their offsets
68  * in the table.
69  *
70  * Immediately following this header are the resource entries themselves,
71  * each of which begins with a resource entry header (as described below).
72  */
73 struct resource_table {
74 	u32 ver;
75 	u32 num;
76 	u32 reserved[2];
77 	u32 offset[];
78 } __packed;
79 
80 /**
81  * struct fw_rsc_hdr - firmware resource entry header
82  * @type: resource type
83  * @data: resource data
84  *
85  * Every resource entry begins with a 'struct fw_rsc_hdr' header providing
86  * its @type. The content of the entry itself will immediately follow
87  * this header, and it should be parsed according to the resource type.
88  */
89 struct fw_rsc_hdr {
90 	u32 type;
91 	u8 data[];
92 } __packed;
93 
94 /**
95  * enum fw_resource_type - types of resource entries
96  *
97  * @RSC_CARVEOUT:   request for allocation of a physically contiguous
98  *		    memory region.
99  * @RSC_DEVMEM:     request to iommu_map a memory-based peripheral.
100  * @RSC_TRACE:	    announces the availability of a trace buffer into which
101  *		    the remote processor will be writing logs.
102  * @RSC_VDEV:       declare support for a virtio device, and serve as its
103  *		    virtio header.
104  * @RSC_LAST:       just keep this one at the end of standard resources
105  * @RSC_VENDOR_START:	start of the vendor specific resource types range
106  * @RSC_VENDOR_END:	end of the vendor specific resource types range
107  *
108  * For more details regarding a specific resource type, please see its
109  * dedicated structure below.
110  *
111  * Please note that these values are used as indices to the rproc_handle_rsc
112  * lookup table, so please keep them sane. Moreover, @RSC_LAST is used to
113  * check the validity of an index before the lookup table is accessed, so
114  * please update it as needed.
115  */
116 enum fw_resource_type {
117 	RSC_CARVEOUT		= 0,
118 	RSC_DEVMEM		= 1,
119 	RSC_TRACE		= 2,
120 	RSC_VDEV		= 3,
121 	RSC_LAST		= 4,
122 	RSC_VENDOR_START	= 128,
123 	RSC_VENDOR_END		= 512,
124 };
125 
126 #define FW_RSC_ADDR_ANY (-1)
127 
128 /**
129  * struct fw_rsc_carveout - physically contiguous memory request
130  * @da: device address
131  * @pa: physical address
132  * @len: length (in bytes)
133  * @flags: iommu protection flags
134  * @reserved: reserved (must be zero)
135  * @name: human-readable name of the requested memory region
136  *
137  * This resource entry requests the host to allocate a physically contiguous
138  * memory region.
139  *
140  * These request entries should precede other firmware resource entries,
141  * as other entries might request placing other data objects inside
142  * these memory regions (e.g. data/code segments, trace resource entries, ...).
143  *
144  * Allocating memory this way helps utilizing the reserved physical memory
145  * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries
146  * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB
147  * pressure is important; it may have a substantial impact on performance.
148  *
149  * If the firmware is compiled with static addresses, then @da should specify
150  * the expected device address of this memory region. If @da is set to
151  * FW_RSC_ADDR_ANY, then the host will dynamically allocate it, and then
152  * overwrite @da with the dynamically allocated address.
153  *
154  * We will always use @da to negotiate the device addresses, even if it
155  * isn't using an iommu. In that case, though, it will obviously contain
156  * physical addresses.
157  *
158  * Some remote processors needs to know the allocated physical address
159  * even if they do use an iommu. This is needed, e.g., if they control
160  * hardware accelerators which access the physical memory directly (this
161  * is the case with OMAP4 for instance). In that case, the host will
162  * overwrite @pa with the dynamically allocated physical address.
163  * Generally we don't want to expose physical addresses if we don't have to
164  * (remote processors are generally _not_ trusted), so we might want to
165  * change this to happen _only_ when explicitly required by the hardware.
166  *
167  * @flags is used to provide IOMMU protection flags, and @name should
168  * (optionally) contain a human readable name of this carveout region
169  * (mainly for debugging purposes).
170  */
171 struct fw_rsc_carveout {
172 	u32 da;
173 	u32 pa;
174 	u32 len;
175 	u32 flags;
176 	u32 reserved;
177 	u8 name[32];
178 } __packed;
179 
180 /**
181  * struct fw_rsc_devmem - iommu mapping request
182  * @da: device address
183  * @pa: physical address
184  * @len: length (in bytes)
185  * @flags: iommu protection flags
186  * @reserved: reserved (must be zero)
187  * @name: human-readable name of the requested region to be mapped
188  *
189  * This resource entry requests the host to iommu map a physically contiguous
190  * memory region. This is needed in case the remote processor requires
191  * access to certain memory-based peripherals; _never_ use it to access
192  * regular memory.
193  *
194  * This is obviously only needed if the remote processor is accessing memory
195  * via an iommu.
196  *
197  * @da should specify the required device address, @pa should specify
198  * the physical address we want to map, @len should specify the size of
199  * the mapping and @flags is the IOMMU protection flags. As always, @name may
200  * (optionally) contain a human readable name of this mapping (mainly for
201  * debugging purposes).
202  *
203  * Note: at this point we just "trust" those devmem entries to contain valid
204  * physical addresses, but this isn't safe and will be changed: eventually we
205  * want remoteproc implementations to provide us ranges of physical addresses
206  * the firmware is allowed to request, and not allow firmwares to request
207  * access to physical addresses that are outside those ranges.
208  */
209 struct fw_rsc_devmem {
210 	u32 da;
211 	u32 pa;
212 	u32 len;
213 	u32 flags;
214 	u32 reserved;
215 	u8 name[32];
216 } __packed;
217 
218 /**
219  * struct fw_rsc_trace - trace buffer declaration
220  * @da: device address
221  * @len: length (in bytes)
222  * @reserved: reserved (must be zero)
223  * @name: human-readable name of the trace buffer
224  *
225  * This resource entry provides the host information about a trace buffer
226  * into which the remote processor will write log messages.
227  *
228  * @da specifies the device address of the buffer, @len specifies
229  * its size, and @name may contain a human readable name of the trace buffer.
230  *
231  * After booting the remote processor, the trace buffers are exposed to the
232  * user via debugfs entries (called trace0, trace1, etc..).
233  */
234 struct fw_rsc_trace {
235 	u32 da;
236 	u32 len;
237 	u32 reserved;
238 	u8 name[32];
239 } __packed;
240 
241 /**
242  * struct fw_rsc_vdev_vring - vring descriptor entry
243  * @da: device address
244  * @align: the alignment between the consumer and producer parts of the vring
245  * @num: num of buffers supported by this vring (must be power of two)
246  * @notifyid: a unique rproc-wide notify index for this vring. This notify
247  * index is used when kicking a remote processor, to let it know that this
248  * vring is triggered.
249  * @pa: physical address
250  *
251  * This descriptor is not a resource entry by itself; it is part of the
252  * vdev resource type (see below).
253  *
254  * Note that @da should either contain the device address where
255  * the remote processor is expecting the vring, or indicate that
256  * dynamically allocation of the vring's device address is supported.
257  */
258 struct fw_rsc_vdev_vring {
259 	u32 da;
260 	u32 align;
261 	u32 num;
262 	u32 notifyid;
263 	u32 pa;
264 } __packed;
265 
266 /**
267  * struct fw_rsc_vdev - virtio device header
268  * @id: virtio device id (as in virtio_ids.h)
269  * @notifyid: a unique rproc-wide notify index for this vdev. This notify
270  * index is used when kicking a remote processor, to let it know that the
271  * status/features of this vdev have changes.
272  * @dfeatures: specifies the virtio device features supported by the firmware
273  * @gfeatures: a place holder used by the host to write back the
274  * negotiated features that are supported by both sides.
275  * @config_len: the size of the virtio config space of this vdev. The config
276  * space lies in the resource table immediate after this vdev header.
277  * @status: a place holder where the host will indicate its virtio progress.
278  * @num_of_vrings: indicates how many vrings are described in this vdev header
279  * @reserved: reserved (must be zero)
280  * @vring: an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'.
281  *
282  * This resource is a virtio device header: it provides information about
283  * the vdev, and is then used by the host and its peer remote processors
284  * to negotiate and share certain virtio properties.
285  *
286  * By providing this resource entry, the firmware essentially asks remoteproc
287  * to statically allocate a vdev upon registration of the rproc (dynamic vdev
288  * allocation is not yet supported).
289  *
290  * Note:
291  * 1. unlike virtualization systems, the term 'host' here means
292  *    the Linux side which is running remoteproc to control the remote
293  *    processors. We use the name 'gfeatures' to comply with virtio's terms,
294  *    though there isn't really any virtualized guest OS here: it's the host
295  *    which is responsible for negotiating the final features.
296  *    Yeah, it's a bit confusing.
297  *
298  * 2. immediately following this structure is the virtio config space for
299  *    this vdev (which is specific to the vdev; for more info, read the virtio
300  *    spec). The size of the config space is specified by @config_len.
301  */
302 struct fw_rsc_vdev {
303 	u32 id;
304 	u32 notifyid;
305 	u32 dfeatures;
306 	u32 gfeatures;
307 	u32 config_len;
308 	u8 status;
309 	u8 num_of_vrings;
310 	u8 reserved[2];
311 	struct fw_rsc_vdev_vring vring[];
312 } __packed;
313 
314 struct rproc;
315 
316 /**
317  * struct rproc_mem_entry - memory entry descriptor
318  * @va:	virtual address
319  * @is_iomem: io memory
320  * @dma: dma address
321  * @len: length, in bytes
322  * @da: device address
323  * @release: release associated memory
324  * @priv: associated data
325  * @name: associated memory region name (optional)
326  * @node: list node
327  * @rsc_offset: offset in resource table
328  * @flags: iommu protection flags
329  * @of_resm_idx: reserved memory phandle index
330  * @alloc: specific memory allocator function
331  */
332 struct rproc_mem_entry {
333 	void *va;
334 	bool is_iomem;
335 	dma_addr_t dma;
336 	size_t len;
337 	u32 da;
338 	void *priv;
339 	char name[32];
340 	struct list_head node;
341 	u32 rsc_offset;
342 	u32 flags;
343 	u32 of_resm_idx;
344 	int (*alloc)(struct rproc *rproc, struct rproc_mem_entry *mem);
345 	int (*release)(struct rproc *rproc, struct rproc_mem_entry *mem);
346 };
347 
348 struct firmware;
349 
350 /**
351  * enum rsc_handling_status - return status of rproc_ops handle_rsc hook
352  * @RSC_HANDLED:	resource was handled
353  * @RSC_IGNORED:	resource was ignored
354  */
355 enum rsc_handling_status {
356 	RSC_HANDLED	= 0,
357 	RSC_IGNORED	= 1,
358 };
359 
360 /**
361  * struct rproc_ops - platform-specific device handlers
362  * @prepare:	prepare device for code loading
363  * @unprepare:	unprepare device after stop
364  * @start:	power on the device and boot it
365  * @stop:	power off the device
366  * @attach:	attach to a device that his already powered up
367  * @detach:	detach from a device, leaving it powered up
368  * @kick:	kick a virtqueue (virtqueue id given as a parameter)
369  * @da_to_va:	optional platform hook to perform address translations
370  * @parse_fw:	parse firmware to extract information (e.g. resource table)
371  * @handle_rsc:	optional platform hook to handle vendor resources. Should return
372  *		RSC_HANDLED if resource was handled, RSC_IGNORED if not handled
373  *		and a negative value on error
374  * @find_loaded_rsc_table: find the loaded resource table from firmware image
375  * @get_loaded_rsc_table: get resource table installed in memory
376  *			  by external entity
377  * @load:		load firmware to memory, where the remote processor
378  *			expects to find it
379  * @sanity_check:	sanity check the fw image
380  * @get_boot_addr:	get boot address to entry point specified in firmware
381  * @panic:	optional callback to react to system panic, core will delay
382  *		panic at least the returned number of milliseconds
383  * @coredump:	  collect firmware dump after the subsystem is shutdown
384  */
385 struct rproc_ops {
386 	int (*prepare)(struct rproc *rproc);
387 	int (*unprepare)(struct rproc *rproc);
388 	int (*start)(struct rproc *rproc);
389 	int (*stop)(struct rproc *rproc);
390 	int (*attach)(struct rproc *rproc);
391 	int (*detach)(struct rproc *rproc);
392 	void (*kick)(struct rproc *rproc, int vqid);
393 	void * (*da_to_va)(struct rproc *rproc, u64 da, size_t len, bool *is_iomem);
394 	int (*parse_fw)(struct rproc *rproc, const struct firmware *fw);
395 	int (*handle_rsc)(struct rproc *rproc, u32 rsc_type, void *rsc,
396 			  int offset, int avail);
397 	struct resource_table *(*find_loaded_rsc_table)(
398 				struct rproc *rproc, const struct firmware *fw);
399 	struct resource_table *(*get_loaded_rsc_table)(
400 				struct rproc *rproc, size_t *size);
401 	int (*load)(struct rproc *rproc, const struct firmware *fw);
402 	int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
403 	u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
404 	unsigned long (*panic)(struct rproc *rproc);
405 	void (*coredump)(struct rproc *rproc);
406 };
407 
408 /**
409  * enum rproc_state - remote processor states
410  * @RPROC_OFFLINE:	device is powered off
411  * @RPROC_SUSPENDED:	device is suspended; needs to be woken up to receive
412  *			a message.
413  * @RPROC_RUNNING:	device is up and running
414  * @RPROC_CRASHED:	device has crashed; need to start recovery
415  * @RPROC_DELETED:	device is deleted
416  * @RPROC_ATTACHED:	device has been booted by another entity and the core
417  *			has attached to it
418  * @RPROC_DETACHED:	device has been booted by another entity and waiting
419  *			for the core to attach to it
420  * @RPROC_LAST:		just keep this one at the end
421  *
422  * Please note that the values of these states are used as indices
423  * to rproc_state_string, a state-to-name lookup table,
424  * so please keep the two synchronized. @RPROC_LAST is used to check
425  * the validity of an index before the lookup table is accessed, so
426  * please update it as needed too.
427  */
428 enum rproc_state {
429 	RPROC_OFFLINE	= 0,
430 	RPROC_SUSPENDED	= 1,
431 	RPROC_RUNNING	= 2,
432 	RPROC_CRASHED	= 3,
433 	RPROC_DELETED	= 4,
434 	RPROC_ATTACHED	= 5,
435 	RPROC_DETACHED	= 6,
436 	RPROC_LAST	= 7,
437 };
438 
439 /**
440  * enum rproc_crash_type - remote processor crash types
441  * @RPROC_MMUFAULT:	iommu fault
442  * @RPROC_WATCHDOG:	watchdog bite
443  * @RPROC_FATAL_ERROR:	fatal error
444  *
445  * Each element of the enum is used as an array index. So that, the value of
446  * the elements should be always something sane.
447  *
448  * Feel free to add more types when needed.
449  */
450 enum rproc_crash_type {
451 	RPROC_MMUFAULT,
452 	RPROC_WATCHDOG,
453 	RPROC_FATAL_ERROR,
454 };
455 
456 /**
457  * enum rproc_dump_mechanism - Coredump options for core
458  * @RPROC_COREDUMP_DISABLED:	Don't perform any dump
459  * @RPROC_COREDUMP_ENABLED:	Copy dump to separate buffer and carry on with
460  *				recovery
461  * @RPROC_COREDUMP_INLINE:	Read segments directly from device memory. Stall
462  *				recovery until all segments are read
463  */
464 enum rproc_dump_mechanism {
465 	RPROC_COREDUMP_DISABLED,
466 	RPROC_COREDUMP_ENABLED,
467 	RPROC_COREDUMP_INLINE,
468 };
469 
470 /**
471  * struct rproc_dump_segment - segment info from ELF header
472  * @node:	list node related to the rproc segment list
473  * @da:		device address of the segment
474  * @size:	size of the segment
475  * @priv:	private data associated with the dump_segment
476  * @dump:	custom dump function to fill device memory segment associated
477  *		with coredump
478  * @offset:	offset of the segment
479  */
480 struct rproc_dump_segment {
481 	struct list_head node;
482 
483 	dma_addr_t da;
484 	size_t size;
485 
486 	void *priv;
487 	void (*dump)(struct rproc *rproc, struct rproc_dump_segment *segment,
488 		     void *dest, size_t offset, size_t size);
489 	loff_t offset;
490 };
491 
492 /**
493  * enum rproc_features - features supported
494  *
495  * @RPROC_FEAT_ATTACH_ON_RECOVERY: The remote processor does not need help
496  *				   from Linux to recover, such as firmware
497  *				   loading. Linux just needs to attach after
498  *				   recovery.
499  */
500 
501 enum rproc_features {
502 	RPROC_FEAT_ATTACH_ON_RECOVERY,
503 	RPROC_MAX_FEATURES,
504 };
505 
506 /**
507  * struct rproc - represents a physical remote processor device
508  * @node: list node of this rproc object
509  * @domain: iommu domain
510  * @name: human readable name of the rproc
511  * @firmware: name of firmware file to be loaded
512  * @priv: private data which belongs to the platform-specific rproc module
513  * @ops: platform-specific start/stop rproc handlers
514  * @dev: virtual device for refcounting and common remoteproc behavior
515  * @power: refcount of users who need this rproc powered up
516  * @state: state of the device
517  * @dump_conf: Currently selected coredump configuration
518  * @lock: lock which protects concurrent manipulations of the rproc
519  * @dbg_dir: debugfs directory of this rproc device
520  * @traces: list of trace buffers
521  * @num_traces: number of trace buffers
522  * @carveouts: list of physically contiguous memory allocations
523  * @mappings: list of iommu mappings we initiated, needed on shutdown
524  * @bootaddr: address of first instruction to boot rproc with (optional)
525  * @rvdevs: list of remote virtio devices
526  * @subdevs: list of subdevices, to following the running state
527  * @notifyids: idr for dynamically assigning rproc-wide unique notify ids
528  * @index: index of this rproc device
529  * @crash_handler: workqueue for handling a crash
530  * @crash_cnt: crash counter
531  * @recovery_disabled: flag that state if recovery was disabled
532  * @max_notifyid: largest allocated notify id.
533  * @table_ptr: pointer to the resource table in effect
534  * @clean_table: copy of the resource table without modifications.  Used
535  *		 when a remote processor is attached or detached from the core
536  * @cached_table: copy of the resource table
537  * @table_sz: size of @cached_table
538  * @has_iommu: flag to indicate if remote processor is behind an MMU
539  * @auto_boot: flag to indicate if remote processor should be auto-started
540  * @sysfs_read_only: flag to make remoteproc sysfs files read only
541  * @dump_segments: list of segments in the firmware
542  * @nb_vdev: number of vdev currently handled by rproc
543  * @elf_class: firmware ELF class
544  * @elf_machine: firmware ELF machine
545  * @cdev: character device of the rproc
546  * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release
547  * @features: indicate remoteproc features
548  */
549 struct rproc {
550 	struct list_head node;
551 	struct iommu_domain *domain;
552 	const char *name;
553 	const char *firmware;
554 	void *priv;
555 	struct rproc_ops *ops;
556 	struct device dev;
557 	atomic_t power;
558 	unsigned int state;
559 	enum rproc_dump_mechanism dump_conf;
560 	struct mutex lock;
561 	struct dentry *dbg_dir;
562 	struct list_head traces;
563 	int num_traces;
564 	struct list_head carveouts;
565 	struct list_head mappings;
566 	u64 bootaddr;
567 	struct list_head rvdevs;
568 	struct list_head subdevs;
569 	struct idr notifyids;
570 	int index;
571 	struct work_struct crash_handler;
572 	unsigned int crash_cnt;
573 	bool recovery_disabled;
574 	int max_notifyid;
575 	struct resource_table *table_ptr;
576 	struct resource_table *clean_table;
577 	struct resource_table *cached_table;
578 	size_t table_sz;
579 	bool has_iommu;
580 	bool auto_boot;
581 	bool sysfs_read_only;
582 	struct list_head dump_segments;
583 	int nb_vdev;
584 	u8 elf_class;
585 	u16 elf_machine;
586 	struct cdev cdev;
587 	bool cdev_put_on_release;
588 	DECLARE_BITMAP(features, RPROC_MAX_FEATURES);
589 };
590 
591 /**
592  * struct rproc_subdev - subdevice tied to a remoteproc
593  * @node: list node related to the rproc subdevs list
594  * @prepare: prepare function, called before the rproc is started
595  * @start: start function, called after the rproc has been started
596  * @stop: stop function, called before the rproc is stopped; the @crashed
597  *	    parameter indicates if this originates from a recovery
598  * @unprepare: unprepare function, called after the rproc has been stopped
599  */
600 struct rproc_subdev {
601 	struct list_head node;
602 
603 	int (*prepare)(struct rproc_subdev *subdev);
604 	int (*start)(struct rproc_subdev *subdev);
605 	void (*stop)(struct rproc_subdev *subdev, bool crashed);
606 	void (*unprepare)(struct rproc_subdev *subdev);
607 };
608 
609 /* we currently support only two vrings per rvdev */
610 
611 #define RVDEV_NUM_VRINGS 2
612 
613 /**
614  * struct rproc_vring - remoteproc vring state
615  * @va:	virtual address
616  * @num: vring size
617  * @da: device address
618  * @align: vring alignment
619  * @notifyid: rproc-specific unique vring index
620  * @rvdev: remote vdev
621  * @vq: the virtqueue of this vring
622  */
623 struct rproc_vring {
624 	void *va;
625 	int num;
626 	u32 da;
627 	u32 align;
628 	int notifyid;
629 	struct rproc_vdev *rvdev;
630 	struct virtqueue *vq;
631 };
632 
633 /**
634  * struct rproc_vdev - remoteproc state for a supported virtio device
635  * @subdev: handle for registering the vdev as a rproc subdevice
636  * @pdev: remoteproc virtio platform device
637  * @id: virtio device id (as in virtio_ids.h)
638  * @node: list node
639  * @rproc: the rproc handle
640  * @vring: the vrings for this vdev
641  * @rsc_offset: offset of the vdev's resource entry
642  * @index: vdev position versus other vdev declared in resource table
643  */
644 struct rproc_vdev {
645 
646 	struct rproc_subdev subdev;
647 	struct platform_device *pdev;
648 
649 	unsigned int id;
650 	struct list_head node;
651 	struct rproc *rproc;
652 	struct rproc_vring vring[RVDEV_NUM_VRINGS];
653 	u32 rsc_offset;
654 	u32 index;
655 };
656 
657 struct rproc *rproc_get_by_phandle(phandle phandle);
658 struct rproc *rproc_get_by_child(struct device *dev);
659 
660 struct rproc *rproc_alloc(struct device *dev, const char *name,
661 			  const struct rproc_ops *ops,
662 			  const char *firmware, int len);
663 void rproc_put(struct rproc *rproc);
664 int rproc_add(struct rproc *rproc);
665 int rproc_del(struct rproc *rproc);
666 void rproc_free(struct rproc *rproc);
667 void rproc_resource_cleanup(struct rproc *rproc);
668 
669 struct rproc *devm_rproc_alloc(struct device *dev, const char *name,
670 			       const struct rproc_ops *ops,
671 			       const char *firmware, int len);
672 int devm_rproc_add(struct device *dev, struct rproc *rproc);
673 
674 void rproc_add_carveout(struct rproc *rproc, struct rproc_mem_entry *mem);
675 
676 struct rproc_mem_entry *
677 rproc_mem_entry_init(struct device *dev,
678 		     void *va, dma_addr_t dma, size_t len, u32 da,
679 		     int (*alloc)(struct rproc *, struct rproc_mem_entry *),
680 		     int (*release)(struct rproc *, struct rproc_mem_entry *),
681 		     const char *name, ...);
682 
683 struct rproc_mem_entry *
684 rproc_of_resm_mem_entry_init(struct device *dev, u32 of_resm_idx, size_t len,
685 			     u32 da, const char *name, ...);
686 
687 int rproc_boot(struct rproc *rproc);
688 int rproc_shutdown(struct rproc *rproc);
689 int rproc_detach(struct rproc *rproc);
690 int rproc_set_firmware(struct rproc *rproc, const char *fw_name);
691 void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type);
692 void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem);
693 void rproc_coredump_using_sections(struct rproc *rproc);
694 int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size);
695 int rproc_coredump_add_custom_segment(struct rproc *rproc,
696 				      dma_addr_t da, size_t size,
697 				      void (*dumpfn)(struct rproc *rproc,
698 						     struct rproc_dump_segment *segment,
699 						     void *dest, size_t offset,
700 						     size_t size),
701 				      void *priv);
702 int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine);
703 
704 void rproc_add_subdev(struct rproc *rproc, struct rproc_subdev *subdev);
705 
706 void rproc_remove_subdev(struct rproc *rproc, struct rproc_subdev *subdev);
707 
708 #endif /* REMOTEPROC_H */
709