1 #ifndef __LINUX_UHCI_H
2 #define __LINUX_UHCI_H
3 
4 /*
5    $Id: usb-uhci.h,v 1.58 2001/08/28 16:45:00 acher Exp $
6  */
7 #define MODNAME "usb-uhci"
8 #define UHCI_LATENCY_TIMER 0
9 
uhci_wait_ms(unsigned int ms)10 static __inline__ void uhci_wait_ms(unsigned int ms)
11 {
12 	if(!in_interrupt())
13 	{
14 		set_current_state(TASK_UNINTERRUPTIBLE);
15 		schedule_timeout(1 + ms * HZ / 1000);
16 	}
17 	else
18 		mdelay(ms);
19 }
20 
21 /* Command register */
22 #define USBCMD		0
23 #define   USBCMD_RS		0x0001	/* Run/Stop */
24 #define   USBCMD_HCRESET	0x0002	/* Host reset */
25 #define   USBCMD_GRESET		0x0004	/* Global reset */
26 #define   USBCMD_EGSM		0x0008	/* Global Suspend Mode */
27 #define   USBCMD_FGR		0x0010	/* Force Global Resume */
28 #define   USBCMD_SWDBG		0x0020	/* SW Debug mode */
29 #define   USBCMD_CF		0x0040	/* Config Flag (sw only) */
30 #define   USBCMD_MAXP		0x0080	/* Max Packet (0 = 32, 1 = 64) */
31 
32 /* Status register */
33 #define USBSTS		2
34 #define   USBSTS_USBINT		0x0001	/* Interrupt due to IOC */
35 #define   USBSTS_ERROR		0x0002	/* Interrupt due to error */
36 #define   USBSTS_RD		0x0004	/* Resume Detect */
37 #define   USBSTS_HSE		0x0008	/* Host System Error - basically PCI problems */
38 #define   USBSTS_HCPE		0x0010	/* Host Controller Process Error - the scripts were buggy */
39 #define   USBSTS_HCH		0x0020	/* HC Halted */
40 
41 /* Interrupt enable register */
42 #define USBINTR		4
43 #define   USBINTR_TIMEOUT	0x0001	/* Timeout/CRC error enable */
44 #define   USBINTR_RESUME	0x0002	/* Resume interrupt enable */
45 #define   USBINTR_IOC		0x0004	/* Interrupt On Complete enable */
46 #define   USBINTR_SP		0x0008	/* Short packet interrupt enable */
47 
48 #define USBFRNUM	6
49 #define USBFLBASEADD	8
50 #define USBSOF		12
51 
52 /* USB port status and control registers */
53 #define USBPORTSC1	16
54 #define USBPORTSC2	18
55 #define   USBPORTSC_CCS		0x0001	/* Current Connect Status ("device present") */
56 #define   USBPORTSC_CSC		0x0002	/* Connect Status Change */
57 #define   USBPORTSC_PE		0x0004	/* Port Enable */
58 #define   USBPORTSC_PEC		0x0008	/* Port Enable Change */
59 #define   USBPORTSC_LS		0x0030	/* Line Status */
60 #define   USBPORTSC_RD		0x0040	/* Resume Detect */
61 #define   USBPORTSC_LSDA	0x0100	/* Low Speed Device Attached */
62 #define   USBPORTSC_PR		0x0200	/* Port Reset */
63 #define   USBPORTSC_SUSP	0x1000	/* Suspend */
64 
65 /* Legacy support register */
66 #define USBLEGSUP 0xc0
67 #define USBLEGSUP_DEFAULT 0x2000	/* only PIRQ enable set */
68 
69 #define UHCI_NULL_DATA_SIZE	0x7ff	/* for UHCI controller TD */
70 #define UHCI_PID 		0xff	/* PID MASK */
71 
72 #define UHCI_PTR_BITS		0x000F
73 #define UHCI_PTR_TERM		0x0001
74 #define UHCI_PTR_QH		0x0002
75 #define UHCI_PTR_DEPTH		0x0004
76 
77 #define UHCI_NUMFRAMES		1024	/* in the frame list [array] */
78 #define UHCI_MAX_SOF_NUMBER	2047	/* in an SOF packet */
79 #define CAN_SCHEDULE_FRAMES	1000	/* how far future frames can be scheduled */
80 
81 /*
82  * for TD <status>:
83  */
84 #define TD_CTRL_SPD		(1 << 29)	/* Short Packet Detect */
85 #define TD_CTRL_C_ERR_MASK	(3 << 27)	/* Error Counter bits */
86 #define TD_CTRL_LS		(1 << 26)	/* Low Speed Device */
87 #define TD_CTRL_IOS		(1 << 25)	/* Isochronous Select */
88 #define TD_CTRL_IOC		(1 << 24)	/* Interrupt on Complete */
89 #define TD_CTRL_ACTIVE		(1 << 23)	/* TD Active */
90 #define TD_CTRL_STALLED		(1 << 22)	/* TD Stalled */
91 #define TD_CTRL_DBUFERR		(1 << 21)	/* Data Buffer Error */
92 #define TD_CTRL_BABBLE		(1 << 20)	/* Babble Detected */
93 #define TD_CTRL_NAK		(1 << 19)	/* NAK Received */
94 #define TD_CTRL_CRCTIMEO	(1 << 18)	/* CRC/Time Out Error */
95 #define TD_CTRL_BITSTUFF	(1 << 17)	/* Bit Stuff Error */
96 #define TD_CTRL_ACTLEN_MASK	0x7ff	/* actual length, encoded as n - 1 */
97 
98 #define TD_CTRL_ANY_ERROR	(TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
99 				 TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF)
100 
101 #define uhci_status_bits(ctrl_sts)	(ctrl_sts & 0xFE0000)
102 #define uhci_actual_length(ctrl_sts)	((ctrl_sts + 1) & TD_CTRL_ACTLEN_MASK)	/* 1-based */
103 #define uhci_ptr_to_virt(x)	bus_to_virt(x & ~UHCI_PTR_BITS)
104 
105 /*
106  * for TD <flags>:
107  */
108 #define UHCI_TD_REMOVE		0x0001	/* Remove when done */
109 
110 /*
111  * for TD <info>: (a.k.a. Token)
112  */
113 #define TD_TOKEN_TOGGLE		19
114 
115 #define uhci_maxlen(token)	((token) >> 21)
116 #define uhci_toggle(token)	(((token) >> TD_TOKEN_TOGGLE) & 1)
117 #define uhci_endpoint(token)	(((token) >> 15) & 0xf)
118 #define uhci_devaddr(token)	(((token) >> 8) & 0x7f)
119 #define uhci_devep(token)	(((token) >> 8) & 0x7ff)
120 #define uhci_packetid(token)	((token) & 0xff)
121 #define uhci_packetout(token)	(uhci_packetid(token) != USB_PID_IN)
122 #define uhci_packetin(token)	(uhci_packetid(token) == USB_PID_IN)
123 
124 /* ------------------------------------------------------------------------------------
125    New TD/QH-structures
126    ------------------------------------------------------------------------------------ */
127 typedef enum {
128 	TD_TYPE, QH_TYPE
129 } uhci_desc_type_t;
130 
131 typedef struct {
132 	__u32 link;
133 	__u32 status;
134 	__u32 info;
135 	__u32 buffer;
136 } uhci_td_t, *puhci_td_t;
137 
138 typedef struct {
139 	__u32 head;
140 	__u32 element;		/* Queue element pointer */
141 } uhci_qh_t, *puhci_qh_t;
142 
143 typedef struct {
144 	union {
145 		uhci_td_t td;
146 		uhci_qh_t qh;
147 	} hw;
148 	uhci_desc_type_t type;
149 	dma_addr_t dma_addr;
150 	struct list_head horizontal;
151 	struct list_head vertical;
152 	struct list_head desc_list;
153 	int last_used;
154 } uhci_desc_t, *puhci_desc_t;
155 
156 typedef struct {
157 	struct list_head desc_list;	// list pointer to all corresponding TDs/QHs associated with this request
158 	dma_addr_t setup_packet_dma;
159 	dma_addr_t transfer_buffer_dma;
160 	unsigned long started;
161 	struct urb *next_queued_urb;	// next queued urb for this EP
162 	struct urb *prev_queued_urb;
163 	uhci_desc_t *bottom_qh;
164 	uhci_desc_t *next_qh;       	// next helper QH
165 	char use_loop;
166 	char flags;
167 } urb_priv_t, *purb_priv_t;
168 
169 struct virt_root_hub {
170 	int devnum;		/* Address of Root Hub endpoint */
171 	void *urb;
172 	void *int_addr;
173 	int send;
174 	int interval;
175 	int numports;
176 	int c_p_r[8];
177 	struct timer_list rh_int_timer;
178 };
179 
180 typedef struct uhci {
181 	int irq;
182 	unsigned int io_addr;
183 	unsigned int io_size;
184 	unsigned int maxports;
185 	int running;
186 
187 	int apm_state;
188 
189 	struct uhci *next;	// chain of uhci device contexts
190 
191 	struct list_head urb_list;	// list of all pending urbs
192 
193 	spinlock_t urb_list_lock;	// lock to keep consistency
194 
195 	int unlink_urb_done;
196 	atomic_t avoid_bulk;
197 
198 	struct usb_bus *bus;	// our bus
199 
200 	__u32 *framelist;
201 	dma_addr_t framelist_dma;
202 	uhci_desc_t **iso_td;
203 	uhci_desc_t *int_chain[8];
204 	uhci_desc_t *ls_control_chain;
205 	uhci_desc_t *control_chain;
206 	uhci_desc_t *bulk_chain;
207 	uhci_desc_t *chain_end;
208 	uhci_desc_t *td1ms;
209 	uhci_desc_t *td32ms;
210 	struct list_head free_desc;
211 	spinlock_t qh_lock;
212 	spinlock_t td_lock;
213 	struct virt_root_hub rh;	//private data of the virtual root hub
214 	int loop_usage;            // URBs using bandwidth reclamation
215 
216 	struct list_head urb_unlinked;	// list of all unlinked  urbs
217 	long timeout_check;
218 	int timeout_urbs;
219 	struct pci_dev *uhci_pci;
220 	struct pci_pool *desc_pool;
221 } uhci_t, *puhci_t;
222 
223 
224 #define MAKE_TD_ADDR(a) ((a)->dma_addr&~UHCI_PTR_QH)
225 #define MAKE_QH_ADDR(a) ((a)->dma_addr|UHCI_PTR_QH)
226 #define UHCI_GET_CURRENT_FRAME(uhci) (inw ((uhci)->io_addr + USBFRNUM))
227 
228 #define CLEAN_TRANSFER_NO_DELETION 0
229 #define CLEAN_TRANSFER_REGULAR 1
230 #define CLEAN_TRANSFER_DELETION_MARK 2
231 
232 #define CLEAN_NOT_FORCED 0
233 #define CLEAN_FORCED 1
234 
235 #define PROCESS_ISO_REGULAR 0
236 #define PROCESS_ISO_FORCE 1
237 
238 #define UNLINK_ASYNC_STORE_URB 0
239 #define UNLINK_ASYNC_DONT_STORE 1
240 
241 #define is_td_active(desc) (desc->hw.td.status & cpu_to_le32(TD_CTRL_ACTIVE))
242 
243 #define set_qh_head(desc,val) (desc)->hw.qh.head=cpu_to_le32(val)
244 #define set_qh_element(desc,val) (desc)->hw.qh.element=cpu_to_le32(val)
245 #define set_td_link(desc,val) (desc)->hw.td.link=cpu_to_le32(val)
246 #define set_td_ioc(desc) (desc)->hw.td.status |= cpu_to_le32(TD_CTRL_IOC)
247 #define clr_td_ioc(desc) (desc)->hw.td.status &= cpu_to_le32(~TD_CTRL_IOC)
248 
249 
250 /* ------------------------------------------------------------------------------------
251    Virtual Root HUB
252    ------------------------------------------------------------------------------------ */
253 /* destination of request */
254 #define RH_INTERFACE               0x01
255 #define RH_ENDPOINT                0x02
256 #define RH_OTHER                   0x03
257 
258 #define RH_CLASS                   0x20
259 #define RH_VENDOR                  0x40
260 
261 /* Requests: bRequest << 8 | bmRequestType */
262 #define RH_GET_STATUS           0x0080
263 #define RH_CLEAR_FEATURE        0x0100
264 #define RH_SET_FEATURE          0x0300
265 #define RH_SET_ADDRESS			0x0500
266 #define RH_GET_DESCRIPTOR		0x0680
267 #define RH_SET_DESCRIPTOR       0x0700
268 #define RH_GET_CONFIGURATION	0x0880
269 #define RH_SET_CONFIGURATION	0x0900
270 #define RH_GET_STATE            0x0280
271 #define RH_GET_INTERFACE        0x0A80
272 #define RH_SET_INTERFACE        0x0B00
273 #define RH_SYNC_FRAME           0x0C80
274 /* Our Vendor Specific Request */
275 #define RH_SET_EP               0x2000
276 
277 
278 /* Hub port features */
279 #define RH_PORT_CONNECTION         0x00
280 #define RH_PORT_ENABLE             0x01
281 #define RH_PORT_SUSPEND            0x02
282 #define RH_PORT_OVER_CURRENT       0x03
283 #define RH_PORT_RESET              0x04
284 #define RH_PORT_POWER              0x08
285 #define RH_PORT_LOW_SPEED          0x09
286 #define RH_C_PORT_CONNECTION       0x10
287 #define RH_C_PORT_ENABLE           0x11
288 #define RH_C_PORT_SUSPEND          0x12
289 #define RH_C_PORT_OVER_CURRENT     0x13
290 #define RH_C_PORT_RESET            0x14
291 
292 /* Hub features */
293 #define RH_C_HUB_LOCAL_POWER       0x00
294 #define RH_C_HUB_OVER_CURRENT      0x01
295 
296 #define RH_DEVICE_REMOTE_WAKEUP    0x00
297 #define RH_ENDPOINT_STALL          0x01
298 
299 /* Our Vendor Specific feature */
300 #define RH_REMOVE_EP               0x00
301 
302 
303 #define RH_ACK                     0x01
304 #define RH_REQ_ERR                 -1
305 #define RH_NACK                    0x00
306 
307 #endif
308