1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Enable PCIe link L0s/L1 state and Clock Power Management
4 *
5 * Copyright (C) 2007 Intel
6 * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)
7 * Copyright (C) Shaohua Li (shaohua.li@intel.com)
8 */
9
10 #include <linux/kernel.h>
11 #include <linux/math.h>
12 #include <linux/module.h>
13 #include <linux/moduleparam.h>
14 #include <linux/pci.h>
15 #include <linux/pci_regs.h>
16 #include <linux/errno.h>
17 #include <linux/pm.h>
18 #include <linux/init.h>
19 #include <linux/slab.h>
20 #include <linux/jiffies.h>
21 #include <linux/delay.h>
22 #include "../pci.h"
23
24 #ifdef MODULE_PARAM_PREFIX
25 #undef MODULE_PARAM_PREFIX
26 #endif
27 #define MODULE_PARAM_PREFIX "pcie_aspm."
28
29 /* Note: those are not register definitions */
30 #define ASPM_STATE_L0S_UP (1) /* Upstream direction L0s state */
31 #define ASPM_STATE_L0S_DW (2) /* Downstream direction L0s state */
32 #define ASPM_STATE_L1 (4) /* L1 state */
33 #define ASPM_STATE_L1_1 (8) /* ASPM L1.1 state */
34 #define ASPM_STATE_L1_2 (0x10) /* ASPM L1.2 state */
35 #define ASPM_STATE_L1_1_PCIPM (0x20) /* PCI PM L1.1 state */
36 #define ASPM_STATE_L1_2_PCIPM (0x40) /* PCI PM L1.2 state */
37 #define ASPM_STATE_L1_SS_PCIPM (ASPM_STATE_L1_1_PCIPM | ASPM_STATE_L1_2_PCIPM)
38 #define ASPM_STATE_L1_2_MASK (ASPM_STATE_L1_2 | ASPM_STATE_L1_2_PCIPM)
39 #define ASPM_STATE_L1SS (ASPM_STATE_L1_1 | ASPM_STATE_L1_1_PCIPM |\
40 ASPM_STATE_L1_2_MASK)
41 #define ASPM_STATE_L0S (ASPM_STATE_L0S_UP | ASPM_STATE_L0S_DW)
42 #define ASPM_STATE_ALL (ASPM_STATE_L0S | ASPM_STATE_L1 | \
43 ASPM_STATE_L1SS)
44
45 struct pcie_link_state {
46 struct pci_dev *pdev; /* Upstream component of the Link */
47 struct pci_dev *downstream; /* Downstream component, function 0 */
48 struct pcie_link_state *root; /* pointer to the root port link */
49 struct pcie_link_state *parent; /* pointer to the parent Link state */
50 struct list_head sibling; /* node in link_list */
51
52 /* ASPM state */
53 u32 aspm_support:7; /* Supported ASPM state */
54 u32 aspm_enabled:7; /* Enabled ASPM state */
55 u32 aspm_capable:7; /* Capable ASPM state with latency */
56 u32 aspm_default:7; /* Default ASPM state by BIOS */
57 u32 aspm_disable:7; /* Disabled ASPM state */
58
59 /* Clock PM state */
60 u32 clkpm_capable:1; /* Clock PM capable? */
61 u32 clkpm_enabled:1; /* Current Clock PM state */
62 u32 clkpm_default:1; /* Default Clock PM state by BIOS */
63 u32 clkpm_disable:1; /* Clock PM disabled */
64 };
65
66 static int aspm_disabled, aspm_force;
67 static bool aspm_support_enabled = true;
68 static DEFINE_MUTEX(aspm_lock);
69 static LIST_HEAD(link_list);
70
71 #define POLICY_DEFAULT 0 /* BIOS default setting */
72 #define POLICY_PERFORMANCE 1 /* high performance */
73 #define POLICY_POWERSAVE 2 /* high power saving */
74 #define POLICY_POWER_SUPERSAVE 3 /* possibly even more power saving */
75
76 #ifdef CONFIG_PCIEASPM_PERFORMANCE
77 static int aspm_policy = POLICY_PERFORMANCE;
78 #elif defined CONFIG_PCIEASPM_POWERSAVE
79 static int aspm_policy = POLICY_POWERSAVE;
80 #elif defined CONFIG_PCIEASPM_POWER_SUPERSAVE
81 static int aspm_policy = POLICY_POWER_SUPERSAVE;
82 #else
83 static int aspm_policy;
84 #endif
85
86 static const char *policy_str[] = {
87 [POLICY_DEFAULT] = "default",
88 [POLICY_PERFORMANCE] = "performance",
89 [POLICY_POWERSAVE] = "powersave",
90 [POLICY_POWER_SUPERSAVE] = "powersupersave"
91 };
92
93 /*
94 * The L1 PM substate capability is only implemented in function 0 in a
95 * multi function device.
96 */
pci_function_0(struct pci_bus * linkbus)97 static struct pci_dev *pci_function_0(struct pci_bus *linkbus)
98 {
99 struct pci_dev *child;
100
101 list_for_each_entry(child, &linkbus->devices, bus_list)
102 if (PCI_FUNC(child->devfn) == 0)
103 return child;
104 return NULL;
105 }
106
policy_to_aspm_state(struct pcie_link_state * link)107 static int policy_to_aspm_state(struct pcie_link_state *link)
108 {
109 switch (aspm_policy) {
110 case POLICY_PERFORMANCE:
111 /* Disable ASPM and Clock PM */
112 return 0;
113 case POLICY_POWERSAVE:
114 /* Enable ASPM L0s/L1 */
115 return (ASPM_STATE_L0S | ASPM_STATE_L1);
116 case POLICY_POWER_SUPERSAVE:
117 /* Enable Everything */
118 return ASPM_STATE_ALL;
119 case POLICY_DEFAULT:
120 return link->aspm_default;
121 }
122 return 0;
123 }
124
policy_to_clkpm_state(struct pcie_link_state * link)125 static int policy_to_clkpm_state(struct pcie_link_state *link)
126 {
127 switch (aspm_policy) {
128 case POLICY_PERFORMANCE:
129 /* Disable ASPM and Clock PM */
130 return 0;
131 case POLICY_POWERSAVE:
132 case POLICY_POWER_SUPERSAVE:
133 /* Enable Clock PM */
134 return 1;
135 case POLICY_DEFAULT:
136 return link->clkpm_default;
137 }
138 return 0;
139 }
140
pcie_set_clkpm_nocheck(struct pcie_link_state * link,int enable)141 static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
142 {
143 struct pci_dev *child;
144 struct pci_bus *linkbus = link->pdev->subordinate;
145 u32 val = enable ? PCI_EXP_LNKCTL_CLKREQ_EN : 0;
146
147 list_for_each_entry(child, &linkbus->devices, bus_list)
148 pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
149 PCI_EXP_LNKCTL_CLKREQ_EN,
150 val);
151 link->clkpm_enabled = !!enable;
152 }
153
pcie_set_clkpm(struct pcie_link_state * link,int enable)154 static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
155 {
156 /*
157 * Don't enable Clock PM if the link is not Clock PM capable
158 * or Clock PM is disabled
159 */
160 if (!link->clkpm_capable || link->clkpm_disable)
161 enable = 0;
162 /* Need nothing if the specified equals to current state */
163 if (link->clkpm_enabled == enable)
164 return;
165 pcie_set_clkpm_nocheck(link, enable);
166 }
167
pcie_clkpm_cap_init(struct pcie_link_state * link,int blacklist)168 static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
169 {
170 int capable = 1, enabled = 1;
171 u32 reg32;
172 u16 reg16;
173 struct pci_dev *child;
174 struct pci_bus *linkbus = link->pdev->subordinate;
175
176 /* All functions should have the same cap and state, take the worst */
177 list_for_each_entry(child, &linkbus->devices, bus_list) {
178 pcie_capability_read_dword(child, PCI_EXP_LNKCAP, ®32);
179 if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) {
180 capable = 0;
181 enabled = 0;
182 break;
183 }
184 pcie_capability_read_word(child, PCI_EXP_LNKCTL, ®16);
185 if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN))
186 enabled = 0;
187 }
188 link->clkpm_enabled = enabled;
189 link->clkpm_default = enabled;
190 link->clkpm_capable = capable;
191 link->clkpm_disable = blacklist ? 1 : 0;
192 }
193
194 /*
195 * pcie_aspm_configure_common_clock: check if the 2 ends of a link
196 * could use common clock. If they are, configure them to use the
197 * common clock. That will reduce the ASPM state exit latency.
198 */
pcie_aspm_configure_common_clock(struct pcie_link_state * link)199 static void pcie_aspm_configure_common_clock(struct pcie_link_state *link)
200 {
201 int same_clock = 1;
202 u16 reg16, ccc, parent_old_ccc, child_old_ccc[8];
203 struct pci_dev *child, *parent = link->pdev;
204 struct pci_bus *linkbus = parent->subordinate;
205 /*
206 * All functions of a slot should have the same Slot Clock
207 * Configuration, so just check one function
208 */
209 child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
210 BUG_ON(!pci_is_pcie(child));
211
212 /* Check downstream component if bit Slot Clock Configuration is 1 */
213 pcie_capability_read_word(child, PCI_EXP_LNKSTA, ®16);
214 if (!(reg16 & PCI_EXP_LNKSTA_SLC))
215 same_clock = 0;
216
217 /* Check upstream component if bit Slot Clock Configuration is 1 */
218 pcie_capability_read_word(parent, PCI_EXP_LNKSTA, ®16);
219 if (!(reg16 & PCI_EXP_LNKSTA_SLC))
220 same_clock = 0;
221
222 /* Port might be already in common clock mode */
223 pcie_capability_read_word(parent, PCI_EXP_LNKCTL, ®16);
224 parent_old_ccc = reg16 & PCI_EXP_LNKCTL_CCC;
225 if (same_clock && (reg16 & PCI_EXP_LNKCTL_CCC)) {
226 bool consistent = true;
227
228 list_for_each_entry(child, &linkbus->devices, bus_list) {
229 pcie_capability_read_word(child, PCI_EXP_LNKCTL,
230 ®16);
231 if (!(reg16 & PCI_EXP_LNKCTL_CCC)) {
232 consistent = false;
233 break;
234 }
235 }
236 if (consistent)
237 return;
238 pci_info(parent, "ASPM: current common clock configuration is inconsistent, reconfiguring\n");
239 }
240
241 ccc = same_clock ? PCI_EXP_LNKCTL_CCC : 0;
242 /* Configure downstream component, all functions */
243 list_for_each_entry(child, &linkbus->devices, bus_list) {
244 pcie_capability_read_word(child, PCI_EXP_LNKCTL, ®16);
245 child_old_ccc[PCI_FUNC(child->devfn)] = reg16 & PCI_EXP_LNKCTL_CCC;
246 pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
247 PCI_EXP_LNKCTL_CCC, ccc);
248 }
249
250 /* Configure upstream component */
251 pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL,
252 PCI_EXP_LNKCTL_CCC, ccc);
253
254 if (pcie_retrain_link(link->pdev, true)) {
255
256 /* Training failed. Restore common clock configurations */
257 pci_err(parent, "ASPM: Could not configure common clock\n");
258 list_for_each_entry(child, &linkbus->devices, bus_list)
259 pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
260 PCI_EXP_LNKCTL_CCC,
261 child_old_ccc[PCI_FUNC(child->devfn)]);
262 pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL,
263 PCI_EXP_LNKCTL_CCC, parent_old_ccc);
264 }
265 }
266
267 /* Convert L0s latency encoding to ns */
calc_l0s_latency(u32 lnkcap)268 static u32 calc_l0s_latency(u32 lnkcap)
269 {
270 u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L0SEL) >> 12;
271
272 if (encoding == 0x7)
273 return (5 * 1000); /* > 4us */
274 return (64 << encoding);
275 }
276
277 /* Convert L0s acceptable latency encoding to ns */
calc_l0s_acceptable(u32 encoding)278 static u32 calc_l0s_acceptable(u32 encoding)
279 {
280 if (encoding == 0x7)
281 return -1U;
282 return (64 << encoding);
283 }
284
285 /* Convert L1 latency encoding to ns */
calc_l1_latency(u32 lnkcap)286 static u32 calc_l1_latency(u32 lnkcap)
287 {
288 u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L1EL) >> 15;
289
290 if (encoding == 0x7)
291 return (65 * 1000); /* > 64us */
292 return (1000 << encoding);
293 }
294
295 /* Convert L1 acceptable latency encoding to ns */
calc_l1_acceptable(u32 encoding)296 static u32 calc_l1_acceptable(u32 encoding)
297 {
298 if (encoding == 0x7)
299 return -1U;
300 return (1000 << encoding);
301 }
302
303 /* Convert L1SS T_pwr encoding to usec */
calc_l12_pwron(struct pci_dev * pdev,u32 scale,u32 val)304 static u32 calc_l12_pwron(struct pci_dev *pdev, u32 scale, u32 val)
305 {
306 switch (scale) {
307 case 0:
308 return val * 2;
309 case 1:
310 return val * 10;
311 case 2:
312 return val * 100;
313 }
314 pci_err(pdev, "%s: Invalid T_PwrOn scale: %u\n", __func__, scale);
315 return 0;
316 }
317
318 /*
319 * Encode an LTR_L1.2_THRESHOLD value for the L1 PM Substates Control 1
320 * register. Ports enter L1.2 when the most recent LTR value is greater
321 * than or equal to LTR_L1.2_THRESHOLD, so we round up to make sure we
322 * don't enter L1.2 too aggressively.
323 *
324 * See PCIe r6.0, sec 5.5.1, 6.18, 7.8.3.3.
325 */
encode_l12_threshold(u32 threshold_us,u32 * scale,u32 * value)326 static void encode_l12_threshold(u32 threshold_us, u32 *scale, u32 *value)
327 {
328 u64 threshold_ns = (u64) threshold_us * 1000;
329
330 /*
331 * LTR_L1.2_THRESHOLD_Value ("value") is a 10-bit field with max
332 * value of 0x3ff.
333 */
334 if (threshold_ns <= 0x3ff * 1) {
335 *scale = 0; /* Value times 1ns */
336 *value = threshold_ns;
337 } else if (threshold_ns <= 0x3ff * 32) {
338 *scale = 1; /* Value times 32ns */
339 *value = roundup(threshold_ns, 32) / 32;
340 } else if (threshold_ns <= 0x3ff * 1024) {
341 *scale = 2; /* Value times 1024ns */
342 *value = roundup(threshold_ns, 1024) / 1024;
343 } else if (threshold_ns <= 0x3ff * 32768) {
344 *scale = 3; /* Value times 32768ns */
345 *value = roundup(threshold_ns, 32768) / 32768;
346 } else if (threshold_ns <= 0x3ff * 1048576) {
347 *scale = 4; /* Value times 1048576ns */
348 *value = roundup(threshold_ns, 1048576) / 1048576;
349 } else if (threshold_ns <= 0x3ff * (u64) 33554432) {
350 *scale = 5; /* Value times 33554432ns */
351 *value = roundup(threshold_ns, 33554432) / 33554432;
352 } else {
353 *scale = 5;
354 *value = 0x3ff; /* Max representable value */
355 }
356 }
357
pcie_aspm_check_latency(struct pci_dev * endpoint)358 static void pcie_aspm_check_latency(struct pci_dev *endpoint)
359 {
360 u32 latency, encoding, lnkcap_up, lnkcap_dw;
361 u32 l1_switch_latency = 0, latency_up_l0s;
362 u32 latency_up_l1, latency_dw_l0s, latency_dw_l1;
363 u32 acceptable_l0s, acceptable_l1;
364 struct pcie_link_state *link;
365
366 /* Device not in D0 doesn't need latency check */
367 if ((endpoint->current_state != PCI_D0) &&
368 (endpoint->current_state != PCI_UNKNOWN))
369 return;
370
371 link = endpoint->bus->self->link_state;
372
373 /* Calculate endpoint L0s acceptable latency */
374 encoding = (endpoint->devcap & PCI_EXP_DEVCAP_L0S) >> 6;
375 acceptable_l0s = calc_l0s_acceptable(encoding);
376
377 /* Calculate endpoint L1 acceptable latency */
378 encoding = (endpoint->devcap & PCI_EXP_DEVCAP_L1) >> 9;
379 acceptable_l1 = calc_l1_acceptable(encoding);
380
381 while (link) {
382 struct pci_dev *dev = pci_function_0(link->pdev->subordinate);
383
384 /* Read direction exit latencies */
385 pcie_capability_read_dword(link->pdev, PCI_EXP_LNKCAP,
386 &lnkcap_up);
387 pcie_capability_read_dword(dev, PCI_EXP_LNKCAP,
388 &lnkcap_dw);
389 latency_up_l0s = calc_l0s_latency(lnkcap_up);
390 latency_up_l1 = calc_l1_latency(lnkcap_up);
391 latency_dw_l0s = calc_l0s_latency(lnkcap_dw);
392 latency_dw_l1 = calc_l1_latency(lnkcap_dw);
393
394 /* Check upstream direction L0s latency */
395 if ((link->aspm_capable & ASPM_STATE_L0S_UP) &&
396 (latency_up_l0s > acceptable_l0s))
397 link->aspm_capable &= ~ASPM_STATE_L0S_UP;
398
399 /* Check downstream direction L0s latency */
400 if ((link->aspm_capable & ASPM_STATE_L0S_DW) &&
401 (latency_dw_l0s > acceptable_l0s))
402 link->aspm_capable &= ~ASPM_STATE_L0S_DW;
403 /*
404 * Check L1 latency.
405 * Every switch on the path to root complex need 1
406 * more microsecond for L1. Spec doesn't mention L0s.
407 *
408 * The exit latencies for L1 substates are not advertised
409 * by a device. Since the spec also doesn't mention a way
410 * to determine max latencies introduced by enabling L1
411 * substates on the components, it is not clear how to do
412 * a L1 substate exit latency check. We assume that the
413 * L1 exit latencies advertised by a device include L1
414 * substate latencies (and hence do not do any check).
415 */
416 latency = max_t(u32, latency_up_l1, latency_dw_l1);
417 if ((link->aspm_capable & ASPM_STATE_L1) &&
418 (latency + l1_switch_latency > acceptable_l1))
419 link->aspm_capable &= ~ASPM_STATE_L1;
420 l1_switch_latency += 1000;
421
422 link = link->parent;
423 }
424 }
425
pci_clear_and_set_dword(struct pci_dev * pdev,int pos,u32 clear,u32 set)426 static void pci_clear_and_set_dword(struct pci_dev *pdev, int pos,
427 u32 clear, u32 set)
428 {
429 u32 val;
430
431 pci_read_config_dword(pdev, pos, &val);
432 val &= ~clear;
433 val |= set;
434 pci_write_config_dword(pdev, pos, val);
435 }
436
437 /* Calculate L1.2 PM substate timing parameters */
aspm_calc_l12_info(struct pcie_link_state * link,u32 parent_l1ss_cap,u32 child_l1ss_cap)438 static void aspm_calc_l12_info(struct pcie_link_state *link,
439 u32 parent_l1ss_cap, u32 child_l1ss_cap)
440 {
441 struct pci_dev *child = link->downstream, *parent = link->pdev;
442 u32 val1, val2, scale1, scale2;
443 u32 t_common_mode, t_power_on, l1_2_threshold, scale, value;
444 u32 ctl1 = 0, ctl2 = 0;
445 u32 pctl1, pctl2, cctl1, cctl2;
446 u32 pl1_2_enables, cl1_2_enables;
447
448 /* Choose the greater of the two Port Common_Mode_Restore_Times */
449 val1 = (parent_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
450 val2 = (child_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
451 t_common_mode = max(val1, val2);
452
453 /* Choose the greater of the two Port T_POWER_ON times */
454 val1 = (parent_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19;
455 scale1 = (parent_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16;
456 val2 = (child_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19;
457 scale2 = (child_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16;
458
459 if (calc_l12_pwron(parent, scale1, val1) >
460 calc_l12_pwron(child, scale2, val2)) {
461 ctl2 |= scale1 | (val1 << 3);
462 t_power_on = calc_l12_pwron(parent, scale1, val1);
463 } else {
464 ctl2 |= scale2 | (val2 << 3);
465 t_power_on = calc_l12_pwron(child, scale2, val2);
466 }
467
468 /*
469 * Set LTR_L1.2_THRESHOLD to the time required to transition the
470 * Link from L0 to L1.2 and back to L0 so we enter L1.2 only if
471 * downstream devices report (via LTR) that they can tolerate at
472 * least that much latency.
473 *
474 * Based on PCIe r3.1, sec 5.5.3.3.1, Figures 5-16 and 5-17, and
475 * Table 5-11. T(POWER_OFF) is at most 2us and T(L1.2) is at
476 * least 4us.
477 */
478 l1_2_threshold = 2 + 4 + t_common_mode + t_power_on;
479 encode_l12_threshold(l1_2_threshold, &scale, &value);
480 ctl1 |= t_common_mode << 8 | scale << 29 | value << 16;
481
482 /* Some broken devices only support dword access to L1 SS */
483 pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, &pctl1);
484 pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, &pctl2);
485 pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL1, &cctl1);
486 pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL2, &cctl2);
487
488 if (ctl1 == pctl1 && ctl1 == cctl1 &&
489 ctl2 == pctl2 && ctl2 == cctl2)
490 return;
491
492 /* Disable L1.2 while updating. See PCIe r5.0, sec 5.5.4, 7.8.3.3 */
493 pl1_2_enables = pctl1 & PCI_L1SS_CTL1_L1_2_MASK;
494 cl1_2_enables = cctl1 & PCI_L1SS_CTL1_L1_2_MASK;
495
496 if (pl1_2_enables || cl1_2_enables) {
497 pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
498 PCI_L1SS_CTL1_L1_2_MASK, 0);
499 pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
500 PCI_L1SS_CTL1_L1_2_MASK, 0);
501 }
502
503 /* Program T_POWER_ON times in both ports */
504 pci_write_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, ctl2);
505 pci_write_config_dword(child, child->l1ss + PCI_L1SS_CTL2, ctl2);
506
507 /* Program Common_Mode_Restore_Time in upstream device */
508 pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
509 PCI_L1SS_CTL1_CM_RESTORE_TIME, ctl1);
510
511 /* Program LTR_L1.2_THRESHOLD time in both ports */
512 pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
513 PCI_L1SS_CTL1_LTR_L12_TH_VALUE |
514 PCI_L1SS_CTL1_LTR_L12_TH_SCALE, ctl1);
515 pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
516 PCI_L1SS_CTL1_LTR_L12_TH_VALUE |
517 PCI_L1SS_CTL1_LTR_L12_TH_SCALE, ctl1);
518
519 if (pl1_2_enables || cl1_2_enables) {
520 pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, 0,
521 pl1_2_enables);
522 pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1, 0,
523 cl1_2_enables);
524 }
525 }
526
aspm_l1ss_init(struct pcie_link_state * link)527 static void aspm_l1ss_init(struct pcie_link_state *link)
528 {
529 struct pci_dev *child = link->downstream, *parent = link->pdev;
530 u32 parent_l1ss_cap, child_l1ss_cap;
531 u32 parent_l1ss_ctl1 = 0, child_l1ss_ctl1 = 0;
532
533 if (!parent->l1ss || !child->l1ss)
534 return;
535
536 /* Setup L1 substate */
537 pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CAP,
538 &parent_l1ss_cap);
539 pci_read_config_dword(child, child->l1ss + PCI_L1SS_CAP,
540 &child_l1ss_cap);
541
542 if (!(parent_l1ss_cap & PCI_L1SS_CAP_L1_PM_SS))
543 parent_l1ss_cap = 0;
544 if (!(child_l1ss_cap & PCI_L1SS_CAP_L1_PM_SS))
545 child_l1ss_cap = 0;
546
547 /*
548 * If we don't have LTR for the entire path from the Root Complex
549 * to this device, we can't use ASPM L1.2 because it relies on the
550 * LTR_L1.2_THRESHOLD. See PCIe r4.0, secs 5.5.4, 6.18.
551 */
552 if (!child->ltr_path)
553 child_l1ss_cap &= ~PCI_L1SS_CAP_ASPM_L1_2;
554
555 if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_ASPM_L1_1)
556 link->aspm_support |= ASPM_STATE_L1_1;
557 if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_ASPM_L1_2)
558 link->aspm_support |= ASPM_STATE_L1_2;
559 if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_1)
560 link->aspm_support |= ASPM_STATE_L1_1_PCIPM;
561 if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_2)
562 link->aspm_support |= ASPM_STATE_L1_2_PCIPM;
563
564 if (parent_l1ss_cap)
565 pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
566 &parent_l1ss_ctl1);
567 if (child_l1ss_cap)
568 pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL1,
569 &child_l1ss_ctl1);
570
571 if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_1)
572 link->aspm_enabled |= ASPM_STATE_L1_1;
573 if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_2)
574 link->aspm_enabled |= ASPM_STATE_L1_2;
575 if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_1)
576 link->aspm_enabled |= ASPM_STATE_L1_1_PCIPM;
577 if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_2)
578 link->aspm_enabled |= ASPM_STATE_L1_2_PCIPM;
579
580 if (link->aspm_support & ASPM_STATE_L1_2_MASK)
581 aspm_calc_l12_info(link, parent_l1ss_cap, child_l1ss_cap);
582 }
583
pcie_aspm_cap_init(struct pcie_link_state * link,int blacklist)584 static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
585 {
586 struct pci_dev *child = link->downstream, *parent = link->pdev;
587 u32 parent_lnkcap, child_lnkcap;
588 u16 parent_lnkctl, child_lnkctl;
589 struct pci_bus *linkbus = parent->subordinate;
590
591 if (blacklist) {
592 /* Set enabled/disable so that we will disable ASPM later */
593 link->aspm_enabled = ASPM_STATE_ALL;
594 link->aspm_disable = ASPM_STATE_ALL;
595 return;
596 }
597
598 /*
599 * If ASPM not supported, don't mess with the clocks and link,
600 * bail out now.
601 */
602 pcie_capability_read_dword(parent, PCI_EXP_LNKCAP, &parent_lnkcap);
603 pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &child_lnkcap);
604 if (!(parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPMS))
605 return;
606
607 /* Configure common clock before checking latencies */
608 pcie_aspm_configure_common_clock(link);
609
610 /*
611 * Re-read upstream/downstream components' register state after
612 * clock configuration. L0s & L1 exit latencies in the otherwise
613 * read-only Link Capabilities may change depending on common clock
614 * configuration (PCIe r5.0, sec 7.5.3.6).
615 */
616 pcie_capability_read_dword(parent, PCI_EXP_LNKCAP, &parent_lnkcap);
617 pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &child_lnkcap);
618 pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &parent_lnkctl);
619 pcie_capability_read_word(child, PCI_EXP_LNKCTL, &child_lnkctl);
620
621 /*
622 * Setup L0s state
623 *
624 * Note that we must not enable L0s in either direction on a
625 * given link unless components on both sides of the link each
626 * support L0s.
627 */
628 if (parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPM_L0S)
629 link->aspm_support |= ASPM_STATE_L0S;
630
631 if (child_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S)
632 link->aspm_enabled |= ASPM_STATE_L0S_UP;
633 if (parent_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S)
634 link->aspm_enabled |= ASPM_STATE_L0S_DW;
635
636 /* Setup L1 state */
637 if (parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPM_L1)
638 link->aspm_support |= ASPM_STATE_L1;
639
640 if (parent_lnkctl & child_lnkctl & PCI_EXP_LNKCTL_ASPM_L1)
641 link->aspm_enabled |= ASPM_STATE_L1;
642
643 aspm_l1ss_init(link);
644
645 /* Save default state */
646 link->aspm_default = link->aspm_enabled;
647
648 /* Setup initial capable state. Will be updated later */
649 link->aspm_capable = link->aspm_support;
650
651 /* Get and check endpoint acceptable latencies */
652 list_for_each_entry(child, &linkbus->devices, bus_list) {
653 if (pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT &&
654 pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END)
655 continue;
656
657 pcie_aspm_check_latency(child);
658 }
659 }
660
661 /* Configure the ASPM L1 substates */
pcie_config_aspm_l1ss(struct pcie_link_state * link,u32 state)662 static void pcie_config_aspm_l1ss(struct pcie_link_state *link, u32 state)
663 {
664 u32 val, enable_req;
665 struct pci_dev *child = link->downstream, *parent = link->pdev;
666
667 enable_req = (link->aspm_enabled ^ state) & state;
668
669 /*
670 * Here are the rules specified in the PCIe spec for enabling L1SS:
671 * - When enabling L1.x, enable bit at parent first, then at child
672 * - When disabling L1.x, disable bit at child first, then at parent
673 * - When enabling ASPM L1.x, need to disable L1
674 * (at child followed by parent).
675 * - The ASPM/PCIPM L1.2 must be disabled while programming timing
676 * parameters
677 *
678 * To keep it simple, disable all L1SS bits first, and later enable
679 * what is needed.
680 */
681
682 /* Disable all L1 substates */
683 pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
684 PCI_L1SS_CTL1_L1SS_MASK, 0);
685 pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
686 PCI_L1SS_CTL1_L1SS_MASK, 0);
687 /*
688 * If needed, disable L1, and it gets enabled later
689 * in pcie_config_aspm_link().
690 */
691 if (enable_req & (ASPM_STATE_L1_1 | ASPM_STATE_L1_2)) {
692 pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
693 PCI_EXP_LNKCTL_ASPM_L1, 0);
694 pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL,
695 PCI_EXP_LNKCTL_ASPM_L1, 0);
696 }
697
698 val = 0;
699 if (state & ASPM_STATE_L1_1)
700 val |= PCI_L1SS_CTL1_ASPM_L1_1;
701 if (state & ASPM_STATE_L1_2)
702 val |= PCI_L1SS_CTL1_ASPM_L1_2;
703 if (state & ASPM_STATE_L1_1_PCIPM)
704 val |= PCI_L1SS_CTL1_PCIPM_L1_1;
705 if (state & ASPM_STATE_L1_2_PCIPM)
706 val |= PCI_L1SS_CTL1_PCIPM_L1_2;
707
708 /* Enable what we need to enable */
709 pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
710 PCI_L1SS_CTL1_L1SS_MASK, val);
711 pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
712 PCI_L1SS_CTL1_L1SS_MASK, val);
713 }
714
pcie_config_aspm_dev(struct pci_dev * pdev,u32 val)715 static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)
716 {
717 pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL,
718 PCI_EXP_LNKCTL_ASPMC, val);
719 }
720
pcie_config_aspm_link(struct pcie_link_state * link,u32 state)721 static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state)
722 {
723 u32 upstream = 0, dwstream = 0;
724 struct pci_dev *child = link->downstream, *parent = link->pdev;
725 struct pci_bus *linkbus = parent->subordinate;
726
727 /* Enable only the states that were not explicitly disabled */
728 state &= (link->aspm_capable & ~link->aspm_disable);
729
730 /* Can't enable any substates if L1 is not enabled */
731 if (!(state & ASPM_STATE_L1))
732 state &= ~ASPM_STATE_L1SS;
733
734 /* Spec says both ports must be in D0 before enabling PCI PM substates*/
735 if (parent->current_state != PCI_D0 || child->current_state != PCI_D0) {
736 state &= ~ASPM_STATE_L1_SS_PCIPM;
737 state |= (link->aspm_enabled & ASPM_STATE_L1_SS_PCIPM);
738 }
739
740 /* Nothing to do if the link is already in the requested state */
741 if (link->aspm_enabled == state)
742 return;
743 /* Convert ASPM state to upstream/downstream ASPM register state */
744 if (state & ASPM_STATE_L0S_UP)
745 dwstream |= PCI_EXP_LNKCTL_ASPM_L0S;
746 if (state & ASPM_STATE_L0S_DW)
747 upstream |= PCI_EXP_LNKCTL_ASPM_L0S;
748 if (state & ASPM_STATE_L1) {
749 upstream |= PCI_EXP_LNKCTL_ASPM_L1;
750 dwstream |= PCI_EXP_LNKCTL_ASPM_L1;
751 }
752
753 if (link->aspm_capable & ASPM_STATE_L1SS)
754 pcie_config_aspm_l1ss(link, state);
755
756 /*
757 * Spec 2.0 suggests all functions should be configured the
758 * same setting for ASPM. Enabling ASPM L1 should be done in
759 * upstream component first and then downstream, and vice
760 * versa for disabling ASPM L1. Spec doesn't mention L0S.
761 */
762 if (state & ASPM_STATE_L1)
763 pcie_config_aspm_dev(parent, upstream);
764 list_for_each_entry(child, &linkbus->devices, bus_list)
765 pcie_config_aspm_dev(child, dwstream);
766 if (!(state & ASPM_STATE_L1))
767 pcie_config_aspm_dev(parent, upstream);
768
769 link->aspm_enabled = state;
770 }
771
pcie_config_aspm_path(struct pcie_link_state * link)772 static void pcie_config_aspm_path(struct pcie_link_state *link)
773 {
774 while (link) {
775 pcie_config_aspm_link(link, policy_to_aspm_state(link));
776 link = link->parent;
777 }
778 }
779
free_link_state(struct pcie_link_state * link)780 static void free_link_state(struct pcie_link_state *link)
781 {
782 link->pdev->link_state = NULL;
783 kfree(link);
784 }
785
pcie_aspm_sanity_check(struct pci_dev * pdev)786 static int pcie_aspm_sanity_check(struct pci_dev *pdev)
787 {
788 struct pci_dev *child;
789 u32 reg32;
790
791 /*
792 * Some functions in a slot might not all be PCIe functions,
793 * very strange. Disable ASPM for the whole slot
794 */
795 list_for_each_entry(child, &pdev->subordinate->devices, bus_list) {
796 if (!pci_is_pcie(child))
797 return -EINVAL;
798
799 /*
800 * If ASPM is disabled then we're not going to change
801 * the BIOS state. It's safe to continue even if it's a
802 * pre-1.1 device
803 */
804
805 if (aspm_disabled)
806 continue;
807
808 /*
809 * Disable ASPM for pre-1.1 PCIe device, we follow MS to use
810 * RBER bit to determine if a function is 1.1 version device
811 */
812 pcie_capability_read_dword(child, PCI_EXP_DEVCAP, ®32);
813 if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
814 pci_info(child, "disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'\n");
815 return -EINVAL;
816 }
817 }
818 return 0;
819 }
820
alloc_pcie_link_state(struct pci_dev * pdev)821 static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev)
822 {
823 struct pcie_link_state *link;
824
825 link = kzalloc(sizeof(*link), GFP_KERNEL);
826 if (!link)
827 return NULL;
828
829 INIT_LIST_HEAD(&link->sibling);
830 link->pdev = pdev;
831 link->downstream = pci_function_0(pdev->subordinate);
832
833 /*
834 * Root Ports and PCI/PCI-X to PCIe Bridges are roots of PCIe
835 * hierarchies. Note that some PCIe host implementations omit
836 * the root ports entirely, in which case a downstream port on
837 * a switch may become the root of the link state chain for all
838 * its subordinate endpoints.
839 */
840 if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT ||
841 pci_pcie_type(pdev) == PCI_EXP_TYPE_PCIE_BRIDGE ||
842 !pdev->bus->parent->self) {
843 link->root = link;
844 } else {
845 struct pcie_link_state *parent;
846
847 parent = pdev->bus->parent->self->link_state;
848 if (!parent) {
849 kfree(link);
850 return NULL;
851 }
852
853 link->parent = parent;
854 link->root = link->parent->root;
855 }
856
857 list_add(&link->sibling, &link_list);
858 pdev->link_state = link;
859 return link;
860 }
861
pcie_aspm_update_sysfs_visibility(struct pci_dev * pdev)862 static void pcie_aspm_update_sysfs_visibility(struct pci_dev *pdev)
863 {
864 struct pci_dev *child;
865
866 list_for_each_entry(child, &pdev->subordinate->devices, bus_list)
867 sysfs_update_group(&child->dev.kobj, &aspm_ctrl_attr_group);
868 }
869
870 /*
871 * pcie_aspm_init_link_state: Initiate PCI express link state.
872 * It is called after the pcie and its children devices are scanned.
873 * @pdev: the root port or switch downstream port
874 */
pcie_aspm_init_link_state(struct pci_dev * pdev)875 void pcie_aspm_init_link_state(struct pci_dev *pdev)
876 {
877 struct pcie_link_state *link;
878 int blacklist = !!pcie_aspm_sanity_check(pdev);
879
880 if (!aspm_support_enabled)
881 return;
882
883 if (pdev->link_state)
884 return;
885
886 /*
887 * We allocate pcie_link_state for the component on the upstream
888 * end of a Link, so there's nothing to do unless this device is
889 * downstream port.
890 */
891 if (!pcie_downstream_port(pdev))
892 return;
893
894 /* VIA has a strange chipset, root port is under a bridge */
895 if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT &&
896 pdev->bus->self)
897 return;
898
899 down_read(&pci_bus_sem);
900 if (list_empty(&pdev->subordinate->devices))
901 goto out;
902
903 mutex_lock(&aspm_lock);
904 link = alloc_pcie_link_state(pdev);
905 if (!link)
906 goto unlock;
907 /*
908 * Setup initial ASPM state. Note that we need to configure
909 * upstream links also because capable state of them can be
910 * update through pcie_aspm_cap_init().
911 */
912 pcie_aspm_cap_init(link, blacklist);
913
914 /* Setup initial Clock PM state */
915 pcie_clkpm_cap_init(link, blacklist);
916
917 /*
918 * At this stage drivers haven't had an opportunity to change the
919 * link policy setting. Enabling ASPM on broken hardware can cripple
920 * it even before the driver has had a chance to disable ASPM, so
921 * default to a safe level right now. If we're enabling ASPM beyond
922 * the BIOS's expectation, we'll do so once pci_enable_device() is
923 * called.
924 */
925 if (aspm_policy != POLICY_POWERSAVE &&
926 aspm_policy != POLICY_POWER_SUPERSAVE) {
927 pcie_config_aspm_path(link);
928 pcie_set_clkpm(link, policy_to_clkpm_state(link));
929 }
930
931 pcie_aspm_update_sysfs_visibility(pdev);
932
933 unlock:
934 mutex_unlock(&aspm_lock);
935 out:
936 up_read(&pci_bus_sem);
937 }
938
939 /* Recheck latencies and update aspm_capable for links under the root */
pcie_update_aspm_capable(struct pcie_link_state * root)940 static void pcie_update_aspm_capable(struct pcie_link_state *root)
941 {
942 struct pcie_link_state *link;
943 BUG_ON(root->parent);
944 list_for_each_entry(link, &link_list, sibling) {
945 if (link->root != root)
946 continue;
947 link->aspm_capable = link->aspm_support;
948 }
949 list_for_each_entry(link, &link_list, sibling) {
950 struct pci_dev *child;
951 struct pci_bus *linkbus = link->pdev->subordinate;
952 if (link->root != root)
953 continue;
954 list_for_each_entry(child, &linkbus->devices, bus_list) {
955 if ((pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT) &&
956 (pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END))
957 continue;
958 pcie_aspm_check_latency(child);
959 }
960 }
961 }
962
963 /* @pdev: the endpoint device */
pcie_aspm_exit_link_state(struct pci_dev * pdev)964 void pcie_aspm_exit_link_state(struct pci_dev *pdev)
965 {
966 struct pci_dev *parent = pdev->bus->self;
967 struct pcie_link_state *link, *root, *parent_link;
968
969 if (!parent || !parent->link_state)
970 return;
971
972 down_read(&pci_bus_sem);
973 mutex_lock(&aspm_lock);
974
975 link = parent->link_state;
976 root = link->root;
977 parent_link = link->parent;
978
979 /*
980 * link->downstream is a pointer to the pci_dev of function 0. If
981 * we remove that function, the pci_dev is about to be deallocated,
982 * so we can't use link->downstream again. Free the link state to
983 * avoid this.
984 *
985 * If we're removing a non-0 function, it's possible we could
986 * retain the link state, but PCIe r6.0, sec 7.5.3.7, recommends
987 * programming the same ASPM Control value for all functions of
988 * multi-function devices, so disable ASPM for all of them.
989 */
990 pcie_config_aspm_link(link, 0);
991 list_del(&link->sibling);
992 free_link_state(link);
993
994 /* Recheck latencies and configure upstream links */
995 if (parent_link) {
996 pcie_update_aspm_capable(root);
997 pcie_config_aspm_path(parent_link);
998 }
999
1000 mutex_unlock(&aspm_lock);
1001 up_read(&pci_bus_sem);
1002 }
1003
1004 /* @pdev: the root port or switch downstream port */
pcie_aspm_pm_state_change(struct pci_dev * pdev)1005 void pcie_aspm_pm_state_change(struct pci_dev *pdev)
1006 {
1007 struct pcie_link_state *link = pdev->link_state;
1008
1009 if (aspm_disabled || !link)
1010 return;
1011 /*
1012 * Devices changed PM state, we should recheck if latency
1013 * meets all functions' requirement
1014 */
1015 down_read(&pci_bus_sem);
1016 mutex_lock(&aspm_lock);
1017 pcie_update_aspm_capable(link->root);
1018 pcie_config_aspm_path(link);
1019 mutex_unlock(&aspm_lock);
1020 up_read(&pci_bus_sem);
1021 }
1022
pcie_aspm_powersave_config_link(struct pci_dev * pdev)1023 void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
1024 {
1025 struct pcie_link_state *link = pdev->link_state;
1026
1027 if (aspm_disabled || !link)
1028 return;
1029
1030 if (aspm_policy != POLICY_POWERSAVE &&
1031 aspm_policy != POLICY_POWER_SUPERSAVE)
1032 return;
1033
1034 down_read(&pci_bus_sem);
1035 mutex_lock(&aspm_lock);
1036 pcie_config_aspm_path(link);
1037 pcie_set_clkpm(link, policy_to_clkpm_state(link));
1038 mutex_unlock(&aspm_lock);
1039 up_read(&pci_bus_sem);
1040 }
1041
pcie_aspm_get_link(struct pci_dev * pdev)1042 static struct pcie_link_state *pcie_aspm_get_link(struct pci_dev *pdev)
1043 {
1044 struct pci_dev *bridge;
1045
1046 if (!pci_is_pcie(pdev))
1047 return NULL;
1048
1049 bridge = pci_upstream_bridge(pdev);
1050 if (!bridge || !pci_is_pcie(bridge))
1051 return NULL;
1052
1053 return bridge->link_state;
1054 }
1055
__pci_disable_link_state(struct pci_dev * pdev,int state,bool sem)1056 static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
1057 {
1058 struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1059
1060 if (!link)
1061 return -EINVAL;
1062 /*
1063 * A driver requested that ASPM be disabled on this device, but
1064 * if we don't have permission to manage ASPM (e.g., on ACPI
1065 * systems we have to observe the FADT ACPI_FADT_NO_ASPM bit and
1066 * the _OSC method), we can't honor that request. Windows has
1067 * a similar mechanism using "PciASPMOptOut", which is also
1068 * ignored in this situation.
1069 */
1070 if (aspm_disabled) {
1071 pci_warn(pdev, "can't disable ASPM; OS doesn't have ASPM control\n");
1072 return -EPERM;
1073 }
1074
1075 if (sem)
1076 down_read(&pci_bus_sem);
1077 mutex_lock(&aspm_lock);
1078 if (state & PCIE_LINK_STATE_L0S)
1079 link->aspm_disable |= ASPM_STATE_L0S;
1080 if (state & PCIE_LINK_STATE_L1)
1081 /* L1 PM substates require L1 */
1082 link->aspm_disable |= ASPM_STATE_L1 | ASPM_STATE_L1SS;
1083 if (state & PCIE_LINK_STATE_L1_1)
1084 link->aspm_disable |= ASPM_STATE_L1_1;
1085 if (state & PCIE_LINK_STATE_L1_2)
1086 link->aspm_disable |= ASPM_STATE_L1_2;
1087 if (state & PCIE_LINK_STATE_L1_1_PCIPM)
1088 link->aspm_disable |= ASPM_STATE_L1_1_PCIPM;
1089 if (state & PCIE_LINK_STATE_L1_2_PCIPM)
1090 link->aspm_disable |= ASPM_STATE_L1_2_PCIPM;
1091 pcie_config_aspm_link(link, policy_to_aspm_state(link));
1092
1093 if (state & PCIE_LINK_STATE_CLKPM)
1094 link->clkpm_disable = 1;
1095 pcie_set_clkpm(link, policy_to_clkpm_state(link));
1096 mutex_unlock(&aspm_lock);
1097 if (sem)
1098 up_read(&pci_bus_sem);
1099
1100 return 0;
1101 }
1102
pci_disable_link_state_locked(struct pci_dev * pdev,int state)1103 int pci_disable_link_state_locked(struct pci_dev *pdev, int state)
1104 {
1105 return __pci_disable_link_state(pdev, state, false);
1106 }
1107 EXPORT_SYMBOL(pci_disable_link_state_locked);
1108
1109 /**
1110 * pci_disable_link_state - Disable device's link state, so the link will
1111 * never enter specific states. Note that if the BIOS didn't grant ASPM
1112 * control to the OS, this does nothing because we can't touch the LNKCTL
1113 * register. Returns 0 or a negative errno.
1114 *
1115 * @pdev: PCI device
1116 * @state: ASPM link state to disable
1117 */
pci_disable_link_state(struct pci_dev * pdev,int state)1118 int pci_disable_link_state(struct pci_dev *pdev, int state)
1119 {
1120 return __pci_disable_link_state(pdev, state, true);
1121 }
1122 EXPORT_SYMBOL(pci_disable_link_state);
1123
__pci_enable_link_state(struct pci_dev * pdev,int state,bool locked)1124 static int __pci_enable_link_state(struct pci_dev *pdev, int state, bool locked)
1125 {
1126 struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1127
1128 if (!link)
1129 return -EINVAL;
1130 /*
1131 * A driver requested that ASPM be enabled on this device, but
1132 * if we don't have permission to manage ASPM (e.g., on ACPI
1133 * systems we have to observe the FADT ACPI_FADT_NO_ASPM bit and
1134 * the _OSC method), we can't honor that request.
1135 */
1136 if (aspm_disabled) {
1137 pci_warn(pdev, "can't override BIOS ASPM; OS doesn't have ASPM control\n");
1138 return -EPERM;
1139 }
1140
1141 if (!locked)
1142 down_read(&pci_bus_sem);
1143 mutex_lock(&aspm_lock);
1144 link->aspm_default = 0;
1145 if (state & PCIE_LINK_STATE_L0S)
1146 link->aspm_default |= ASPM_STATE_L0S;
1147 if (state & PCIE_LINK_STATE_L1)
1148 link->aspm_default |= ASPM_STATE_L1;
1149 /* L1 PM substates require L1 */
1150 if (state & PCIE_LINK_STATE_L1_1)
1151 link->aspm_default |= ASPM_STATE_L1_1 | ASPM_STATE_L1;
1152 if (state & PCIE_LINK_STATE_L1_2)
1153 link->aspm_default |= ASPM_STATE_L1_2 | ASPM_STATE_L1;
1154 if (state & PCIE_LINK_STATE_L1_1_PCIPM)
1155 link->aspm_default |= ASPM_STATE_L1_1_PCIPM | ASPM_STATE_L1;
1156 if (state & PCIE_LINK_STATE_L1_2_PCIPM)
1157 link->aspm_default |= ASPM_STATE_L1_2_PCIPM | ASPM_STATE_L1;
1158 pcie_config_aspm_link(link, policy_to_aspm_state(link));
1159
1160 link->clkpm_default = (state & PCIE_LINK_STATE_CLKPM) ? 1 : 0;
1161 pcie_set_clkpm(link, policy_to_clkpm_state(link));
1162 mutex_unlock(&aspm_lock);
1163 if (!locked)
1164 up_read(&pci_bus_sem);
1165
1166 return 0;
1167 }
1168
1169 /**
1170 * pci_enable_link_state - Clear and set the default device link state so that
1171 * the link may be allowed to enter the specified states. Note that if the
1172 * BIOS didn't grant ASPM control to the OS, this does nothing because we can't
1173 * touch the LNKCTL register. Also note that this does not enable states
1174 * disabled by pci_disable_link_state(). Return 0 or a negative errno.
1175 *
1176 * @pdev: PCI device
1177 * @state: Mask of ASPM link states to enable
1178 */
pci_enable_link_state(struct pci_dev * pdev,int state)1179 int pci_enable_link_state(struct pci_dev *pdev, int state)
1180 {
1181 return __pci_enable_link_state(pdev, state, false);
1182 }
1183 EXPORT_SYMBOL(pci_enable_link_state);
1184
1185 /**
1186 * pci_enable_link_state_locked - Clear and set the default device link state
1187 * so that the link may be allowed to enter the specified states. Note that if
1188 * the BIOS didn't grant ASPM control to the OS, this does nothing because we
1189 * can't touch the LNKCTL register. Also note that this does not enable states
1190 * disabled by pci_disable_link_state(). Return 0 or a negative errno.
1191 *
1192 * @pdev: PCI device
1193 * @state: Mask of ASPM link states to enable
1194 *
1195 * Context: Caller holds pci_bus_sem read lock.
1196 */
pci_enable_link_state_locked(struct pci_dev * pdev,int state)1197 int pci_enable_link_state_locked(struct pci_dev *pdev, int state)
1198 {
1199 lockdep_assert_held_read(&pci_bus_sem);
1200
1201 return __pci_enable_link_state(pdev, state, true);
1202 }
1203 EXPORT_SYMBOL(pci_enable_link_state_locked);
1204
pcie_aspm_set_policy(const char * val,const struct kernel_param * kp)1205 static int pcie_aspm_set_policy(const char *val,
1206 const struct kernel_param *kp)
1207 {
1208 int i;
1209 struct pcie_link_state *link;
1210
1211 if (aspm_disabled)
1212 return -EPERM;
1213 i = sysfs_match_string(policy_str, val);
1214 if (i < 0)
1215 return i;
1216 if (i == aspm_policy)
1217 return 0;
1218
1219 down_read(&pci_bus_sem);
1220 mutex_lock(&aspm_lock);
1221 aspm_policy = i;
1222 list_for_each_entry(link, &link_list, sibling) {
1223 pcie_config_aspm_link(link, policy_to_aspm_state(link));
1224 pcie_set_clkpm(link, policy_to_clkpm_state(link));
1225 }
1226 mutex_unlock(&aspm_lock);
1227 up_read(&pci_bus_sem);
1228 return 0;
1229 }
1230
pcie_aspm_get_policy(char * buffer,const struct kernel_param * kp)1231 static int pcie_aspm_get_policy(char *buffer, const struct kernel_param *kp)
1232 {
1233 int i, cnt = 0;
1234 for (i = 0; i < ARRAY_SIZE(policy_str); i++)
1235 if (i == aspm_policy)
1236 cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]);
1237 else
1238 cnt += sprintf(buffer + cnt, "%s ", policy_str[i]);
1239 cnt += sprintf(buffer + cnt, "\n");
1240 return cnt;
1241 }
1242
1243 module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
1244 NULL, 0644);
1245
1246 /**
1247 * pcie_aspm_enabled - Check if PCIe ASPM has been enabled for a device.
1248 * @pdev: Target device.
1249 *
1250 * Relies on the upstream bridge's link_state being valid. The link_state
1251 * is deallocated only when the last child of the bridge (i.e., @pdev or a
1252 * sibling) is removed, and the caller should be holding a reference to
1253 * @pdev, so this should be safe.
1254 */
pcie_aspm_enabled(struct pci_dev * pdev)1255 bool pcie_aspm_enabled(struct pci_dev *pdev)
1256 {
1257 struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1258
1259 if (!link)
1260 return false;
1261
1262 return link->aspm_enabled;
1263 }
1264 EXPORT_SYMBOL_GPL(pcie_aspm_enabled);
1265
aspm_attr_show_common(struct device * dev,struct device_attribute * attr,char * buf,u8 state)1266 static ssize_t aspm_attr_show_common(struct device *dev,
1267 struct device_attribute *attr,
1268 char *buf, u8 state)
1269 {
1270 struct pci_dev *pdev = to_pci_dev(dev);
1271 struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1272
1273 return sysfs_emit(buf, "%d\n", (link->aspm_enabled & state) ? 1 : 0);
1274 }
1275
aspm_attr_store_common(struct device * dev,struct device_attribute * attr,const char * buf,size_t len,u8 state)1276 static ssize_t aspm_attr_store_common(struct device *dev,
1277 struct device_attribute *attr,
1278 const char *buf, size_t len, u8 state)
1279 {
1280 struct pci_dev *pdev = to_pci_dev(dev);
1281 struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1282 bool state_enable;
1283
1284 if (kstrtobool(buf, &state_enable) < 0)
1285 return -EINVAL;
1286
1287 down_read(&pci_bus_sem);
1288 mutex_lock(&aspm_lock);
1289
1290 if (state_enable) {
1291 link->aspm_disable &= ~state;
1292 /* need to enable L1 for substates */
1293 if (state & ASPM_STATE_L1SS)
1294 link->aspm_disable &= ~ASPM_STATE_L1;
1295 } else {
1296 link->aspm_disable |= state;
1297 if (state & ASPM_STATE_L1)
1298 link->aspm_disable |= ASPM_STATE_L1SS;
1299 }
1300
1301 pcie_config_aspm_link(link, policy_to_aspm_state(link));
1302
1303 mutex_unlock(&aspm_lock);
1304 up_read(&pci_bus_sem);
1305
1306 return len;
1307 }
1308
1309 #define ASPM_ATTR(_f, _s) \
1310 static ssize_t _f##_show(struct device *dev, \
1311 struct device_attribute *attr, char *buf) \
1312 { return aspm_attr_show_common(dev, attr, buf, ASPM_STATE_##_s); } \
1313 \
1314 static ssize_t _f##_store(struct device *dev, \
1315 struct device_attribute *attr, \
1316 const char *buf, size_t len) \
1317 { return aspm_attr_store_common(dev, attr, buf, len, ASPM_STATE_##_s); }
1318
ASPM_ATTR(l0s_aspm,L0S)1319 ASPM_ATTR(l0s_aspm, L0S)
1320 ASPM_ATTR(l1_aspm, L1)
1321 ASPM_ATTR(l1_1_aspm, L1_1)
1322 ASPM_ATTR(l1_2_aspm, L1_2)
1323 ASPM_ATTR(l1_1_pcipm, L1_1_PCIPM)
1324 ASPM_ATTR(l1_2_pcipm, L1_2_PCIPM)
1325
1326 static ssize_t clkpm_show(struct device *dev,
1327 struct device_attribute *attr, char *buf)
1328 {
1329 struct pci_dev *pdev = to_pci_dev(dev);
1330 struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1331
1332 return sysfs_emit(buf, "%d\n", link->clkpm_enabled);
1333 }
1334
clkpm_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t len)1335 static ssize_t clkpm_store(struct device *dev,
1336 struct device_attribute *attr,
1337 const char *buf, size_t len)
1338 {
1339 struct pci_dev *pdev = to_pci_dev(dev);
1340 struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1341 bool state_enable;
1342
1343 if (kstrtobool(buf, &state_enable) < 0)
1344 return -EINVAL;
1345
1346 down_read(&pci_bus_sem);
1347 mutex_lock(&aspm_lock);
1348
1349 link->clkpm_disable = !state_enable;
1350 pcie_set_clkpm(link, policy_to_clkpm_state(link));
1351
1352 mutex_unlock(&aspm_lock);
1353 up_read(&pci_bus_sem);
1354
1355 return len;
1356 }
1357
1358 static DEVICE_ATTR_RW(clkpm);
1359 static DEVICE_ATTR_RW(l0s_aspm);
1360 static DEVICE_ATTR_RW(l1_aspm);
1361 static DEVICE_ATTR_RW(l1_1_aspm);
1362 static DEVICE_ATTR_RW(l1_2_aspm);
1363 static DEVICE_ATTR_RW(l1_1_pcipm);
1364 static DEVICE_ATTR_RW(l1_2_pcipm);
1365
1366 static struct attribute *aspm_ctrl_attrs[] = {
1367 &dev_attr_clkpm.attr,
1368 &dev_attr_l0s_aspm.attr,
1369 &dev_attr_l1_aspm.attr,
1370 &dev_attr_l1_1_aspm.attr,
1371 &dev_attr_l1_2_aspm.attr,
1372 &dev_attr_l1_1_pcipm.attr,
1373 &dev_attr_l1_2_pcipm.attr,
1374 NULL
1375 };
1376
aspm_ctrl_attrs_are_visible(struct kobject * kobj,struct attribute * a,int n)1377 static umode_t aspm_ctrl_attrs_are_visible(struct kobject *kobj,
1378 struct attribute *a, int n)
1379 {
1380 struct device *dev = kobj_to_dev(kobj);
1381 struct pci_dev *pdev = to_pci_dev(dev);
1382 struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1383 static const u8 aspm_state_map[] = {
1384 ASPM_STATE_L0S,
1385 ASPM_STATE_L1,
1386 ASPM_STATE_L1_1,
1387 ASPM_STATE_L1_2,
1388 ASPM_STATE_L1_1_PCIPM,
1389 ASPM_STATE_L1_2_PCIPM,
1390 };
1391
1392 if (aspm_disabled || !link)
1393 return 0;
1394
1395 if (n == 0)
1396 return link->clkpm_capable ? a->mode : 0;
1397
1398 return link->aspm_capable & aspm_state_map[n - 1] ? a->mode : 0;
1399 }
1400
1401 const struct attribute_group aspm_ctrl_attr_group = {
1402 .name = "link",
1403 .attrs = aspm_ctrl_attrs,
1404 .is_visible = aspm_ctrl_attrs_are_visible,
1405 };
1406
pcie_aspm_disable(char * str)1407 static int __init pcie_aspm_disable(char *str)
1408 {
1409 if (!strcmp(str, "off")) {
1410 aspm_policy = POLICY_DEFAULT;
1411 aspm_disabled = 1;
1412 aspm_support_enabled = false;
1413 printk(KERN_INFO "PCIe ASPM is disabled\n");
1414 } else if (!strcmp(str, "force")) {
1415 aspm_force = 1;
1416 printk(KERN_INFO "PCIe ASPM is forcibly enabled\n");
1417 }
1418 return 1;
1419 }
1420
1421 __setup("pcie_aspm=", pcie_aspm_disable);
1422
pcie_no_aspm(void)1423 void pcie_no_aspm(void)
1424 {
1425 /*
1426 * Disabling ASPM is intended to prevent the kernel from modifying
1427 * existing hardware state, not to clear existing state. To that end:
1428 * (a) set policy to POLICY_DEFAULT in order to avoid changing state
1429 * (b) prevent userspace from changing policy
1430 */
1431 if (!aspm_force) {
1432 aspm_policy = POLICY_DEFAULT;
1433 aspm_disabled = 1;
1434 }
1435 }
1436
pcie_aspm_support_enabled(void)1437 bool pcie_aspm_support_enabled(void)
1438 {
1439 return aspm_support_enabled;
1440 }
1441