1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Copyright (c) 2022, Linaro Ltd. 4 * 5 */ 6 #ifndef _MHI_EP_H_ 7 #define _MHI_EP_H_ 8 9 #include <linux/dma-direction.h> 10 #include <linux/mhi.h> 11 12 #define MHI_EP_DEFAULT_MTU 0x8000 13 14 /** 15 * struct mhi_ep_channel_config - Channel configuration structure for controller 16 * @name: The name of this channel 17 * @num: The number assigned to this channel 18 * @num_elements: The number of elements that can be queued to this channel 19 * @dir: Direction that data may flow on this channel 20 */ 21 struct mhi_ep_channel_config { 22 char *name; 23 u32 num; 24 u32 num_elements; 25 enum dma_data_direction dir; 26 }; 27 28 /** 29 * struct mhi_ep_cntrl_config - MHI Endpoint controller configuration 30 * @mhi_version: MHI spec version supported by the controller 31 * @max_channels: Maximum number of channels supported 32 * @num_channels: Number of channels defined in @ch_cfg 33 * @ch_cfg: Array of defined channels 34 */ 35 struct mhi_ep_cntrl_config { 36 u32 mhi_version; 37 u32 max_channels; 38 u32 num_channels; 39 const struct mhi_ep_channel_config *ch_cfg; 40 }; 41 42 /** 43 * struct mhi_ep_db_info - MHI Endpoint doorbell info 44 * @mask: Mask of the doorbell interrupt 45 * @status: Status of the doorbell interrupt 46 */ 47 struct mhi_ep_db_info { 48 u32 mask; 49 u32 status; 50 }; 51 52 /** 53 * struct mhi_ep_cntrl - MHI Endpoint controller structure 54 * @cntrl_dev: Pointer to the struct device of physical bus acting as the MHI 55 * Endpoint controller 56 * @mhi_dev: MHI Endpoint device instance for the controller 57 * @mmio: MMIO region containing the MHI registers 58 * @mhi_chan: Points to the channel configuration table 59 * @mhi_event: Points to the event ring configurations table 60 * @mhi_cmd: Points to the command ring configurations table 61 * @sm: MHI Endpoint state machine 62 * @ch_ctx_cache: Cache of host channel context data structure 63 * @ev_ctx_cache: Cache of host event context data structure 64 * @cmd_ctx_cache: Cache of host command context data structure 65 * @ch_ctx_host_pa: Physical address of host channel context data structure 66 * @ev_ctx_host_pa: Physical address of host event context data structure 67 * @cmd_ctx_host_pa: Physical address of host command context data structure 68 * @ch_ctx_cache_phys: Physical address of the host channel context cache 69 * @ev_ctx_cache_phys: Physical address of the host event context cache 70 * @cmd_ctx_cache_phys: Physical address of the host command context cache 71 * @chdb: Array of channel doorbell interrupt info 72 * @event_lock: Lock for protecting event rings 73 * @list_lock: Lock for protecting state transition and channel doorbell lists 74 * @state_lock: Lock for protecting state transitions 75 * @st_transition_list: List of state transitions 76 * @ch_db_list: List of queued channel doorbells 77 * @wq: Dedicated workqueue for handling rings and state changes 78 * @state_work: State transition worker 79 * @reset_work: Worker for MHI Endpoint reset 80 * @cmd_ring_work: Worker for processing command rings 81 * @ch_ring_work: Worker for processing channel rings 82 * @raise_irq: CB function for raising IRQ to the host 83 * @alloc_map: CB function for allocating memory in endpoint for storing host context and mapping it 84 * @unmap_free: CB function to unmap and free the allocated memory in endpoint for storing host context 85 * @read_from_host: CB function for reading from host memory from endpoint 86 * @write_to_host: CB function for writing to host memory from endpoint 87 * @mhi_state: MHI Endpoint state 88 * @max_chan: Maximum channels supported by the endpoint controller 89 * @mru: MRU (Maximum Receive Unit) value of the endpoint controller 90 * @event_rings: Number of event rings supported by the endpoint controller 91 * @hw_event_rings: Number of hardware event rings supported by the endpoint controller 92 * @chdb_offset: Channel doorbell offset set by the host 93 * @erdb_offset: Event ring doorbell offset set by the host 94 * @index: MHI Endpoint controller index 95 * @irq: IRQ used by the endpoint controller 96 * @enabled: Check if the endpoint controller is enabled or not 97 */ 98 struct mhi_ep_cntrl { 99 struct device *cntrl_dev; 100 struct mhi_ep_device *mhi_dev; 101 void __iomem *mmio; 102 103 struct mhi_ep_chan *mhi_chan; 104 struct mhi_ep_event *mhi_event; 105 struct mhi_ep_cmd *mhi_cmd; 106 struct mhi_ep_sm *sm; 107 108 struct mhi_chan_ctxt *ch_ctx_cache; 109 struct mhi_event_ctxt *ev_ctx_cache; 110 struct mhi_cmd_ctxt *cmd_ctx_cache; 111 u64 ch_ctx_host_pa; 112 u64 ev_ctx_host_pa; 113 u64 cmd_ctx_host_pa; 114 phys_addr_t ch_ctx_cache_phys; 115 phys_addr_t ev_ctx_cache_phys; 116 phys_addr_t cmd_ctx_cache_phys; 117 118 struct mhi_ep_db_info chdb[4]; 119 struct mutex event_lock; 120 spinlock_t list_lock; 121 spinlock_t state_lock; 122 123 struct list_head st_transition_list; 124 struct list_head ch_db_list; 125 126 struct workqueue_struct *wq; 127 struct work_struct state_work; 128 struct work_struct reset_work; 129 struct work_struct cmd_ring_work; 130 struct work_struct ch_ring_work; 131 132 void (*raise_irq)(struct mhi_ep_cntrl *mhi_cntrl, u32 vector); 133 int (*alloc_map)(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, phys_addr_t *phys_ptr, 134 void __iomem **virt, size_t size); 135 void (*unmap_free)(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, phys_addr_t phys, 136 void __iomem *virt, size_t size); 137 int (*read_from_host)(struct mhi_ep_cntrl *mhi_cntrl, u64 from, void *to, size_t size); 138 int (*write_to_host)(struct mhi_ep_cntrl *mhi_cntrl, void *from, u64 to, size_t size); 139 140 enum mhi_state mhi_state; 141 142 u32 max_chan; 143 u32 mru; 144 u32 event_rings; 145 u32 hw_event_rings; 146 u32 chdb_offset; 147 u32 erdb_offset; 148 u32 index; 149 int irq; 150 bool enabled; 151 }; 152 153 /** 154 * struct mhi_ep_device - Structure representing an MHI Endpoint device that binds 155 * to channels or is associated with controllers 156 * @dev: Driver model device node for the MHI Endpoint device 157 * @mhi_cntrl: Controller the device belongs to 158 * @id: Pointer to MHI Endpoint device ID struct 159 * @name: Name of the associated MHI Endpoint device 160 * @ul_chan: UL (from host to endpoint) channel for the device 161 * @dl_chan: DL (from endpoint to host) channel for the device 162 * @dev_type: MHI device type 163 */ 164 struct mhi_ep_device { 165 struct device dev; 166 struct mhi_ep_cntrl *mhi_cntrl; 167 const struct mhi_device_id *id; 168 const char *name; 169 struct mhi_ep_chan *ul_chan; 170 struct mhi_ep_chan *dl_chan; 171 enum mhi_device_type dev_type; 172 }; 173 174 /** 175 * struct mhi_ep_driver - Structure representing a MHI Endpoint client driver 176 * @id_table: Pointer to MHI Endpoint device ID table 177 * @driver: Device driver model driver 178 * @probe: CB function for client driver probe function 179 * @remove: CB function for client driver remove function 180 * @ul_xfer_cb: CB function for UL (from host to endpoint) data transfer 181 * @dl_xfer_cb: CB function for DL (from endpoint to host) data transfer 182 */ 183 struct mhi_ep_driver { 184 const struct mhi_device_id *id_table; 185 struct device_driver driver; 186 int (*probe)(struct mhi_ep_device *mhi_ep, 187 const struct mhi_device_id *id); 188 void (*remove)(struct mhi_ep_device *mhi_ep); 189 void (*ul_xfer_cb)(struct mhi_ep_device *mhi_dev, 190 struct mhi_result *result); 191 void (*dl_xfer_cb)(struct mhi_ep_device *mhi_dev, 192 struct mhi_result *result); 193 }; 194 195 #define to_mhi_ep_device(dev) container_of(dev, struct mhi_ep_device, dev) 196 #define to_mhi_ep_driver(drv) container_of(drv, struct mhi_ep_driver, driver) 197 198 /* 199 * module_mhi_ep_driver() - Helper macro for drivers that don't do 200 * anything special other than using default mhi_ep_driver_register() and 201 * mhi_ep_driver_unregister(). This eliminates a lot of boilerplate. 202 * Each module may only use this macro once. 203 */ 204 #define module_mhi_ep_driver(mhi_drv) \ 205 module_driver(mhi_drv, mhi_ep_driver_register, \ 206 mhi_ep_driver_unregister) 207 208 /* 209 * Macro to avoid include chaining to get THIS_MODULE 210 */ 211 #define mhi_ep_driver_register(mhi_drv) \ 212 __mhi_ep_driver_register(mhi_drv, THIS_MODULE) 213 214 /** 215 * __mhi_ep_driver_register - Register a driver with MHI Endpoint bus 216 * @mhi_drv: Driver to be associated with the device 217 * @owner: The module owner 218 * 219 * Return: 0 if driver registrations succeeds, a negative error code otherwise. 220 */ 221 int __mhi_ep_driver_register(struct mhi_ep_driver *mhi_drv, struct module *owner); 222 223 /** 224 * mhi_ep_driver_unregister - Unregister a driver from MHI Endpoint bus 225 * @mhi_drv: Driver associated with the device 226 */ 227 void mhi_ep_driver_unregister(struct mhi_ep_driver *mhi_drv); 228 229 /** 230 * mhi_ep_register_controller - Register MHI Endpoint controller 231 * @mhi_cntrl: MHI Endpoint controller to register 232 * @config: Configuration to use for the controller 233 * 234 * Return: 0 if controller registrations succeeds, a negative error code otherwise. 235 */ 236 int mhi_ep_register_controller(struct mhi_ep_cntrl *mhi_cntrl, 237 const struct mhi_ep_cntrl_config *config); 238 239 /** 240 * mhi_ep_unregister_controller - Unregister MHI Endpoint controller 241 * @mhi_cntrl: MHI Endpoint controller to unregister 242 */ 243 void mhi_ep_unregister_controller(struct mhi_ep_cntrl *mhi_cntrl); 244 245 /** 246 * mhi_ep_power_up - Power up the MHI endpoint stack 247 * @mhi_cntrl: MHI Endpoint controller 248 * 249 * Return: 0 if power up succeeds, a negative error code otherwise. 250 */ 251 int mhi_ep_power_up(struct mhi_ep_cntrl *mhi_cntrl); 252 253 /** 254 * mhi_ep_power_down - Power down the MHI endpoint stack 255 * @mhi_cntrl: MHI controller 256 */ 257 void mhi_ep_power_down(struct mhi_ep_cntrl *mhi_cntrl); 258 259 /** 260 * mhi_ep_queue_is_empty - Determine whether the transfer queue is empty 261 * @mhi_dev: Device associated with the channels 262 * @dir: DMA direction for the channel 263 * 264 * Return: true if the queue is empty, false otherwise. 265 */ 266 bool mhi_ep_queue_is_empty(struct mhi_ep_device *mhi_dev, enum dma_data_direction dir); 267 268 /** 269 * mhi_ep_queue_skb - Send SKBs to host over MHI Endpoint 270 * @mhi_dev: Device associated with the DL channel 271 * @skb: SKBs to be queued 272 * 273 * Return: 0 if the SKBs has been sent successfully, a negative error code otherwise. 274 */ 275 int mhi_ep_queue_skb(struct mhi_ep_device *mhi_dev, struct sk_buff *skb); 276 277 #endif 278