1 /* 2 * This is the Fusion MPT base driver providing common API layer interface 3 * for access to MPT (Message Passing Technology) firmware. 4 * 5 * This code is based on drivers/scsi/mpt2sas/mpt2_base.h 6 * Copyright (C) 2007-2010 LSI Corporation 7 * (mailto:DL-MPTFusionLinux@lsi.com) 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * as published by the Free Software Foundation; either version 2 12 * of the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * NO WARRANTY 20 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 21 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 22 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 23 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 24 * solely responsible for determining the appropriateness of using and 25 * distributing the Program and assumes all risks associated with its 26 * exercise of rights under this Agreement, including but not limited to 27 * the risks and costs of program errors, damage to or loss of data, 28 * programs or equipment, and unavailability or interruption of operations. 29 30 * DISCLAIMER OF LIABILITY 31 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 32 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 33 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 34 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 35 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 36 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 37 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 38 39 * You should have received a copy of the GNU General Public License 40 * along with this program; if not, write to the Free Software 41 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, 42 * USA. 43 */ 44 45 #ifndef MPT2SAS_BASE_H_INCLUDED 46 #define MPT2SAS_BASE_H_INCLUDED 47 48 #include "mpi/mpi2_type.h" 49 #include "mpi/mpi2.h" 50 #include "mpi/mpi2_ioc.h" 51 #include "mpi/mpi2_cnfg.h" 52 #include "mpi/mpi2_init.h" 53 #include "mpi/mpi2_raid.h" 54 #include "mpi/mpi2_tool.h" 55 #include "mpi/mpi2_sas.h" 56 57 #include <scsi/scsi.h> 58 #include <scsi/scsi_cmnd.h> 59 #include <scsi/scsi_device.h> 60 #include <scsi/scsi_host.h> 61 #include <scsi/scsi_tcq.h> 62 #include <scsi/scsi_transport_sas.h> 63 #include <scsi/scsi_dbg.h> 64 #include <scsi/scsi_eh.h> 65 66 #include "mpt2sas_debug.h" 67 68 /* driver versioning info */ 69 #define MPT2SAS_DRIVER_NAME "mpt2sas" 70 #define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>" 71 #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" 72 #define MPT2SAS_DRIVER_VERSION "12.100.00.00" 73 #define MPT2SAS_MAJOR_VERSION 12 74 #define MPT2SAS_MINOR_VERSION 100 75 #define MPT2SAS_BUILD_VERSION 00 76 #define MPT2SAS_RELEASE_VERSION 00 77 78 /* 79 * Set MPT2SAS_SG_DEPTH value based on user input. 80 */ 81 #ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE 82 #if CONFIG_SCSI_MPT2SAS_MAX_SGE < 16 83 #define MPT2SAS_SG_DEPTH 16 84 #elif CONFIG_SCSI_MPT2SAS_MAX_SGE > 128 85 #define MPT2SAS_SG_DEPTH 128 86 #else 87 #define MPT2SAS_SG_DEPTH CONFIG_SCSI_MPT2SAS_MAX_SGE 88 #endif 89 #else 90 #define MPT2SAS_SG_DEPTH 128 /* MAX_HW_SEGMENTS */ 91 #endif 92 93 94 /* 95 * Generic Defines 96 */ 97 #define MPT2SAS_SATA_QUEUE_DEPTH 32 98 #define MPT2SAS_SAS_QUEUE_DEPTH 254 99 #define MPT2SAS_RAID_QUEUE_DEPTH 128 100 101 #define MPT_NAME_LENGTH 32 /* generic length of strings */ 102 #define MPT_STRING_LENGTH 64 103 104 #define MPT_MAX_CALLBACKS 16 105 106 107 #define CAN_SLEEP 1 108 #define NO_SLEEP 0 109 110 #define INTERNAL_CMDS_COUNT 10 /* reserved cmds */ 111 112 #define MPI2_HIM_MASK 0xFFFFFFFF /* mask every bit*/ 113 114 #define MPT2SAS_INVALID_DEVICE_HANDLE 0xFFFF 115 116 117 /* 118 * reset phases 119 */ 120 #define MPT2_IOC_PRE_RESET 1 /* prior to host reset */ 121 #define MPT2_IOC_AFTER_RESET 2 /* just after host reset */ 122 #define MPT2_IOC_DONE_RESET 3 /* links re-initialized */ 123 124 /* 125 * logging format 126 */ 127 #define MPT2SAS_FMT "%s: " 128 #define MPT2SAS_INFO_FMT KERN_INFO MPT2SAS_FMT 129 #define MPT2SAS_NOTE_FMT KERN_NOTICE MPT2SAS_FMT 130 #define MPT2SAS_WARN_FMT KERN_WARNING MPT2SAS_FMT 131 #define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT 132 133 /* 134 * Dell HBA branding 135 */ 136 #define MPT2SAS_DELL_BRANDING_SIZE 32 137 138 #define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA" 139 #define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter" 140 #define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated" 141 #define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular" 142 #define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded" 143 #define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200" 144 #define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS" 145 146 /* 147 * Dell HBA SSDIDs 148 */ 149 #define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C 150 #define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D 151 #define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E 152 #define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F 153 #define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20 154 #define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21 155 #define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22 156 157 /* 158 * Intel HBA branding 159 */ 160 #define MPT2SAS_INTEL_RMS25JB080_BRANDING \ 161 "Intel(R) Integrated RAID Module RMS25JB080" 162 #define MPT2SAS_INTEL_RMS25JB040_BRANDING \ 163 "Intel(R) Integrated RAID Module RMS25JB040" 164 #define MPT2SAS_INTEL_RMS25KB080_BRANDING \ 165 "Intel(R) Integrated RAID Module RMS25KB080" 166 #define MPT2SAS_INTEL_RMS25KB040_BRANDING \ 167 "Intel(R) Integrated RAID Module RMS25KB040" 168 #define MPT2SAS_INTEL_RMS2LL080_BRANDING \ 169 "Intel Integrated RAID Module RMS2LL080" 170 #define MPT2SAS_INTEL_RMS2LL040_BRANDING \ 171 "Intel Integrated RAID Module RMS2LL040" 172 #define MPT2SAS_INTEL_RS25GB008_BRANDING \ 173 "Intel(R) RAID Controller RS25GB008" 174 #define MPT2SAS_INTEL_RAMSDALE_BRANDING \ 175 "Intel 720 Series SSD" 176 /* 177 * Intel HBA SSDIDs 178 */ 179 #define MPT2SAS_INTEL_RMS25JB080_SSDID 0x3516 180 #define MPT2SAS_INTEL_RMS25JB040_SSDID 0x3517 181 #define MPT2SAS_INTEL_RMS25KB080_SSDID 0x3518 182 #define MPT2SAS_INTEL_RMS25KB040_SSDID 0x3519 183 #define MPT2SAS_INTEL_RMS2LL080_SSDID 0x350E 184 #define MPT2SAS_INTEL_RMS2LL040_SSDID 0x350F 185 #define MPT2SAS_INTEL_RS25GB008_SSDID 0x3000 186 #define MPT2SAS_INTEL_RAMSDALE_SSDID 0x3700 187 188 /* 189 * HP HBA branding 190 */ 191 #define MPT2SAS_HP_3PAR_SSVID 0x1590 192 #define MPT2SAS_HP_2_4_INTERNAL_BRANDING "HP H220 Host Bus Adapter" 193 #define MPT2SAS_HP_2_4_EXTERNAL_BRANDING "HP H221 Host Bus Adapter" 194 #define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING "HP H222 Host Bus Adapter" 195 #define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING "HP H220i Host Bus Adapter" 196 #define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING "HP H210i Host Bus Adapter" 197 198 /* 199 * HO HBA SSDIDs 200 */ 201 #define MPT2SAS_HP_2_4_INTERNAL_SSDID 0x0041 202 #define MPT2SAS_HP_2_4_EXTERNAL_SSDID 0x0042 203 #define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID 0x0043 204 #define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID 0x0044 205 #define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID 0x0046 206 207 /* 208 * WarpDrive Specific Log codes 209 */ 210 211 #define MPT2_WARPDRIVE_LOGENTRY (0x8002) 212 #define MPT2_WARPDRIVE_LC_SSDT (0x41) 213 #define MPT2_WARPDRIVE_LC_SSDLW (0x43) 214 #define MPT2_WARPDRIVE_LC_SSDLF (0x44) 215 #define MPT2_WARPDRIVE_LC_BRMF (0x4D) 216 217 /* 218 * per target private data 219 */ 220 #define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01 221 #define MPT_TARGET_FLAGS_VOLUME 0x02 222 #define MPT_TARGET_FLAGS_DELETED 0x04 223 224 /** 225 * struct MPT2SAS_TARGET - starget private hostdata 226 * @starget: starget object 227 * @sas_address: target sas address 228 * @raid_device: raid_device pointer to access volume data 229 * @handle: device handle 230 * @num_luns: number luns 231 * @flags: MPT_TARGET_FLAGS_XXX flags 232 * @deleted: target flaged for deletion 233 * @tm_busy: target is busy with TM request. 234 */ 235 struct MPT2SAS_TARGET { 236 struct scsi_target *starget; 237 u64 sas_address; 238 struct _raid_device *raid_device; 239 u16 handle; 240 int num_luns; 241 u32 flags; 242 u8 deleted; 243 u8 tm_busy; 244 }; 245 246 247 /* 248 * per device private data 249 */ 250 #define MPT_DEVICE_FLAGS_INIT 0x01 251 #define MPT_DEVICE_TLR_ON 0x02 252 253 /** 254 * struct MPT2SAS_DEVICE - sdev private hostdata 255 * @sas_target: starget private hostdata 256 * @lun: lun number 257 * @flags: MPT_DEVICE_XXX flags 258 * @configured_lun: lun is configured 259 * @block: device is in SDEV_BLOCK state 260 * @tlr_snoop_check: flag used in determining whether to disable TLR 261 */ 262 263 /* OEM Identifiers */ 264 #define MFG10_OEM_ID_INVALID (0x00000000) 265 #define MFG10_OEM_ID_DELL (0x00000001) 266 #define MFG10_OEM_ID_FSC (0x00000002) 267 #define MFG10_OEM_ID_SUN (0x00000003) 268 #define MFG10_OEM_ID_IBM (0x00000004) 269 270 /* GENERIC Flags 0*/ 271 #define MFG10_GF0_OCE_DISABLED (0x00000001) 272 #define MFG10_GF0_R1E_DRIVE_COUNT (0x00000002) 273 #define MFG10_GF0_R10_DISPLAY (0x00000004) 274 #define MFG10_GF0_SSD_DATA_SCRUB_DISABLE (0x00000008) 275 #define MFG10_GF0_SINGLE_DRIVE_R0 (0x00000010) 276 277 /* OEM Specific Flags will come from OEM specific header files */ 278 typedef struct _MPI2_CONFIG_PAGE_MAN_10 { 279 MPI2_CONFIG_PAGE_HEADER Header; /* 00h */ 280 U8 OEMIdentifier; /* 04h */ 281 U8 Reserved1; /* 05h */ 282 U16 Reserved2; /* 08h */ 283 U32 Reserved3; /* 0Ch */ 284 U32 GenericFlags0; /* 10h */ 285 U32 GenericFlags1; /* 14h */ 286 U32 Reserved4; /* 18h */ 287 U32 OEMSpecificFlags0; /* 1Ch */ 288 U32 OEMSpecificFlags1; /* 20h */ 289 U32 Reserved5[18]; /* 24h-60h*/ 290 } MPI2_CONFIG_PAGE_MAN_10, 291 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_10, 292 Mpi2ManufacturingPage10_t, MPI2_POINTER pMpi2ManufacturingPage10_t; 293 294 #define MFG_PAGE10_HIDE_SSDS_MASK (0x00000003) 295 #define MFG_PAGE10_HIDE_ALL_DISKS (0x00) 296 #define MFG_PAGE10_EXPOSE_ALL_DISKS (0x01) 297 #define MFG_PAGE10_HIDE_IF_VOL_PRESENT (0x02) 298 299 300 struct MPT2SAS_DEVICE { 301 struct MPT2SAS_TARGET *sas_target; 302 unsigned int lun; 303 u32 flags; 304 u8 configured_lun; 305 u8 block; 306 u8 tlr_snoop_check; 307 }; 308 309 #define MPT2_CMD_NOT_USED 0x8000 /* free */ 310 #define MPT2_CMD_COMPLETE 0x0001 /* completed */ 311 #define MPT2_CMD_PENDING 0x0002 /* pending */ 312 #define MPT2_CMD_REPLY_VALID 0x0004 /* reply is valid */ 313 #define MPT2_CMD_RESET 0x0008 /* host reset dropped the command */ 314 315 /** 316 * struct _internal_cmd - internal commands struct 317 * @mutex: mutex 318 * @done: completion 319 * @reply: reply message pointer 320 * @sense: sense data 321 * @status: MPT2_CMD_XXX status 322 * @smid: system message id 323 */ 324 struct _internal_cmd { 325 struct mutex mutex; 326 struct completion done; 327 void *reply; 328 void *sense; 329 u16 status; 330 u16 smid; 331 }; 332 333 334 /** 335 * struct _sas_device - attached device information 336 * @list: sas device list 337 * @starget: starget object 338 * @sas_address: device sas address 339 * @device_name: retrieved from the SAS IDENTIFY frame. 340 * @handle: device handle 341 * @sas_address_parent: sas address of parent expander or sas host 342 * @enclosure_handle: enclosure handle 343 * @enclosure_logical_id: enclosure logical identifier 344 * @volume_handle: volume handle (valid when hidden raid member) 345 * @volume_wwid: volume unique identifier 346 * @device_info: bitfield provides detailed info about the device 347 * @id: target id 348 * @channel: target channel 349 * @slot: number number 350 * @phy: phy identifier provided in sas device page 0 351 * @responding: used in _scsih_sas_device_mark_responding 352 */ 353 struct _sas_device { 354 struct list_head list; 355 struct scsi_target *starget; 356 u64 sas_address; 357 u64 device_name; 358 u16 handle; 359 u64 sas_address_parent; 360 u16 enclosure_handle; 361 u64 enclosure_logical_id; 362 u16 volume_handle; 363 u64 volume_wwid; 364 u32 device_info; 365 int id; 366 int channel; 367 u16 slot; 368 u8 phy; 369 u8 responding; 370 }; 371 372 /** 373 * struct _raid_device - raid volume link list 374 * @list: sas device list 375 * @starget: starget object 376 * @sdev: scsi device struct (volumes are single lun) 377 * @wwid: unique identifier for the volume 378 * @handle: device handle 379 * @block_size: Block size of the volume 380 * @id: target id 381 * @channel: target channel 382 * @volume_type: the raid level 383 * @device_info: bitfield provides detailed info about the hidden components 384 * @num_pds: number of hidden raid components 385 * @responding: used in _scsih_raid_device_mark_responding 386 * @percent_complete: resync percent complete 387 * @direct_io_enabled: Whether direct io to PDs are allowed or not 388 * @stripe_exponent: X where 2powX is the stripe sz in blocks 389 * @block_exponent: X where 2powX is the block sz in bytes 390 * @max_lba: Maximum number of LBA in the volume 391 * @stripe_sz: Stripe Size of the volume 392 * @device_info: Device info of the volume member disk 393 * @pd_handle: Array of handles of the physical drives for direct I/O in le16 394 */ 395 #define MPT_MAX_WARPDRIVE_PDS 8 396 struct _raid_device { 397 struct list_head list; 398 struct scsi_target *starget; 399 struct scsi_device *sdev; 400 u64 wwid; 401 u16 handle; 402 u16 block_sz; 403 int id; 404 int channel; 405 u8 volume_type; 406 u8 num_pds; 407 u8 responding; 408 u8 percent_complete; 409 u8 direct_io_enabled; 410 u8 stripe_exponent; 411 u8 block_exponent; 412 u64 max_lba; 413 u32 stripe_sz; 414 u32 device_info; 415 u16 pd_handle[MPT_MAX_WARPDRIVE_PDS]; 416 }; 417 418 /** 419 * struct _boot_device - boot device info 420 * @is_raid: flag to indicate whether this is volume 421 * @device: holds pointer for either struct _sas_device or 422 * struct _raid_device 423 */ 424 struct _boot_device { 425 u8 is_raid; 426 void *device; 427 }; 428 429 /** 430 * struct _sas_port - wide/narrow sas port information 431 * @port_list: list of ports belonging to expander 432 * @num_phys: number of phys belonging to this port 433 * @remote_identify: attached device identification 434 * @rphy: sas transport rphy object 435 * @port: sas transport wide/narrow port object 436 * @phy_list: _sas_phy list objects belonging to this port 437 */ 438 struct _sas_port { 439 struct list_head port_list; 440 u8 num_phys; 441 struct sas_identify remote_identify; 442 struct sas_rphy *rphy; 443 struct sas_port *port; 444 struct list_head phy_list; 445 }; 446 447 /** 448 * struct _sas_phy - phy information 449 * @port_siblings: list of phys belonging to a port 450 * @identify: phy identification 451 * @remote_identify: attached device identification 452 * @phy: sas transport phy object 453 * @phy_id: unique phy id 454 * @handle: device handle for this phy 455 * @attached_handle: device handle for attached device 456 * @phy_belongs_to_port: port has been created for this phy 457 */ 458 struct _sas_phy { 459 struct list_head port_siblings; 460 struct sas_identify identify; 461 struct sas_identify remote_identify; 462 struct sas_phy *phy; 463 u8 phy_id; 464 u16 handle; 465 u16 attached_handle; 466 u8 phy_belongs_to_port; 467 }; 468 469 /** 470 * struct _sas_node - sas_host/expander information 471 * @list: list of expanders 472 * @parent_dev: parent device class 473 * @num_phys: number phys belonging to this sas_host/expander 474 * @sas_address: sas address of this sas_host/expander 475 * @handle: handle for this sas_host/expander 476 * @sas_address_parent: sas address of parent expander or sas host 477 * @enclosure_handle: handle for this a member of an enclosure 478 * @device_info: bitwise defining capabilities of this sas_host/expander 479 * @responding: used in _scsih_expander_device_mark_responding 480 * @phy: a list of phys that make up this sas_host/expander 481 * @sas_port_list: list of ports attached to this sas_host/expander 482 */ 483 struct _sas_node { 484 struct list_head list; 485 struct device *parent_dev; 486 u8 num_phys; 487 u64 sas_address; 488 u16 handle; 489 u64 sas_address_parent; 490 u16 enclosure_handle; 491 u64 enclosure_logical_id; 492 u8 responding; 493 struct _sas_phy *phy; 494 struct list_head sas_port_list; 495 }; 496 497 /** 498 * enum reset_type - reset state 499 * @FORCE_BIG_HAMMER: issue diagnostic reset 500 * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer 501 */ 502 enum reset_type { 503 FORCE_BIG_HAMMER, 504 SOFT_RESET, 505 }; 506 507 /** 508 * struct chain_tracker - firmware chain tracker 509 * @chain_buffer: chain buffer 510 * @chain_buffer_dma: physical address 511 * @tracker_list: list of free request (ioc->free_chain_list) 512 */ 513 struct chain_tracker { 514 void *chain_buffer; 515 dma_addr_t chain_buffer_dma; 516 struct list_head tracker_list; 517 }; 518 519 /** 520 * struct scsiio_tracker - scsi mf request tracker 521 * @smid: system message id 522 * @scmd: scsi request pointer 523 * @cb_idx: callback index 524 * @direct_io: To indicate whether I/O is direct (WARPDRIVE) 525 * @chain_list: list of chains associated to this IO 526 * @tracker_list: list of free request (ioc->free_list) 527 */ 528 struct scsiio_tracker { 529 u16 smid; 530 struct scsi_cmnd *scmd; 531 u8 cb_idx; 532 u8 direct_io; 533 struct list_head chain_list; 534 struct list_head tracker_list; 535 }; 536 537 /** 538 * struct request_tracker - firmware request tracker 539 * @smid: system message id 540 * @cb_idx: callback index 541 * @tracker_list: list of free request (ioc->free_list) 542 */ 543 struct request_tracker { 544 u16 smid; 545 u8 cb_idx; 546 struct list_head tracker_list; 547 }; 548 549 /** 550 * struct _tr_list - target reset list 551 * @handle: device handle 552 * @state: state machine 553 */ 554 struct _tr_list { 555 struct list_head list; 556 u16 handle; 557 u16 state; 558 }; 559 560 typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); 561 562 /** 563 * struct adapter_reply_queue - the reply queue struct 564 * @ioc: per adapter object 565 * @msix_index: msix index into vector table 566 * @vector: irq vector 567 * @reply_post_host_index: head index in the pool where FW completes IO 568 * @reply_post_free: reply post base virt address 569 * @name: the name registered to request_irq() 570 * @busy: isr is actively processing replies on another cpu 571 * @list: this list 572 */ 573 struct adapter_reply_queue { 574 struct MPT2SAS_ADAPTER *ioc; 575 u8 msix_index; 576 unsigned int vector; 577 u32 reply_post_host_index; 578 Mpi2ReplyDescriptorsUnion_t *reply_post_free; 579 char name[MPT_NAME_LENGTH]; 580 atomic_t busy; 581 struct list_head list; 582 }; 583 584 /* IOC Facts and Port Facts converted from little endian to cpu */ 585 union mpi2_version_union { 586 MPI2_VERSION_STRUCT Struct; 587 u32 Word; 588 }; 589 590 struct mpt2sas_facts { 591 u16 MsgVersion; 592 u16 HeaderVersion; 593 u8 IOCNumber; 594 u8 VP_ID; 595 u8 VF_ID; 596 u16 IOCExceptions; 597 u16 IOCStatus; 598 u32 IOCLogInfo; 599 u8 MaxChainDepth; 600 u8 WhoInit; 601 u8 NumberOfPorts; 602 u8 MaxMSIxVectors; 603 u16 RequestCredit; 604 u16 ProductID; 605 u32 IOCCapabilities; 606 union mpi2_version_union FWVersion; 607 u16 IOCRequestFrameSize; 608 u16 Reserved3; 609 u16 MaxInitiators; 610 u16 MaxTargets; 611 u16 MaxSasExpanders; 612 u16 MaxEnclosures; 613 u16 ProtocolFlags; 614 u16 HighPriorityCredit; 615 u16 MaxReplyDescriptorPostQueueDepth; 616 u8 ReplyFrameSize; 617 u8 MaxVolumes; 618 u16 MaxDevHandle; 619 u16 MaxPersistentEntries; 620 u16 MinDevHandle; 621 }; 622 623 struct mpt2sas_port_facts { 624 u8 PortNumber; 625 u8 VP_ID; 626 u8 VF_ID; 627 u8 PortType; 628 u16 MaxPostedCmdBuffers; 629 }; 630 631 /** 632 * enum mutex_type - task management mutex type 633 * @TM_MUTEX_OFF: mutex is not required becuase calling function is acquiring it 634 * @TM_MUTEX_ON: mutex is required 635 */ 636 enum mutex_type { 637 TM_MUTEX_OFF = 0, 638 TM_MUTEX_ON = 1, 639 }; 640 641 typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc); 642 /** 643 * struct MPT2SAS_ADAPTER - per adapter struct 644 * @list: ioc_list 645 * @shost: shost object 646 * @id: unique adapter id 647 * @cpu_count: number online cpus 648 * @name: generic ioc string 649 * @tmp_string: tmp string used for logging 650 * @pdev: pci pdev object 651 * @chip: memory mapped register space 652 * @chip_phys: physical addrss prior to mapping 653 * @logging_level: see mpt2sas_debug.h 654 * @fwfault_debug: debuging FW timeouts 655 * @ir_firmware: IR firmware present 656 * @bars: bitmask of BAR's that must be configured 657 * @mask_interrupts: ignore interrupt 658 * @fault_reset_work_q_name: fw fault work queue 659 * @fault_reset_work_q: "" 660 * @fault_reset_work: "" 661 * @firmware_event_name: fw event work queue 662 * @firmware_event_thread: "" 663 * @fw_events_off: flag to turn off fw event handling 664 * @fw_event_lock: 665 * @fw_event_list: list of fw events 666 * @aen_event_read_flag: event log was read 667 * @broadcast_aen_busy: broadcast aen waiting to be serviced 668 * @shost_recovery: host reset in progress 669 * @ioc_reset_in_progress_lock: 670 * @ioc_link_reset_in_progress: phy/hard reset in progress 671 * @ignore_loginfos: ignore loginfos during task management 672 * @remove_host: flag for when driver unloads, to avoid sending dev resets 673 * @pci_error_recovery: flag to prevent ioc access until slot reset completes 674 * @wait_for_discovery_to_complete: flag set at driver load time when 675 * waiting on reporting devices 676 * @is_driver_loading: flag set at driver load time 677 * @port_enable_failed: flag set when port enable has failed 678 * @start_scan: flag set from scan_start callback, cleared from _mpt2sas_fw_work 679 * @start_scan_failed: means port enable failed, return's the ioc_status 680 * @msix_enable: flag indicating msix is enabled 681 * @msix_vector_count: number msix vectors 682 * @cpu_msix_table: table for mapping cpus to msix index 683 * @cpu_msix_table_sz: table size 684 * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands 685 * @scsi_io_cb_idx: shost generated commands 686 * @tm_cb_idx: task management commands 687 * @scsih_cb_idx: scsih internal commands 688 * @transport_cb_idx: transport internal commands 689 * @ctl_cb_idx: clt internal commands 690 * @base_cb_idx: base internal commands 691 * @config_cb_idx: base internal commands 692 * @tm_tr_cb_idx : device removal target reset handshake 693 * @tm_tr_volume_cb_idx : volume removal target reset 694 * @base_cmds: 695 * @transport_cmds: 696 * @scsih_cmds: 697 * @tm_cmds: 698 * @ctl_cmds: 699 * @config_cmds: 700 * @base_add_sg_single: handler for either 32/64 bit sgl's 701 * @event_type: bits indicating which events to log 702 * @event_context: unique id for each logged event 703 * @event_log: event log pointer 704 * @event_masks: events that are masked 705 * @facts: static facts data 706 * @pfacts: static port facts data 707 * @manu_pg0: static manufacturing page 0 708 * @manu_pg10: static manufacturing page 10 709 * @bios_pg2: static bios page 2 710 * @bios_pg3: static bios page 3 711 * @ioc_pg8: static ioc page 8 712 * @iounit_pg0: static iounit page 0 713 * @iounit_pg1: static iounit page 1 714 * @sas_hba: sas host object 715 * @sas_expander_list: expander object list 716 * @sas_node_lock: 717 * @sas_device_list: sas device object list 718 * @sas_device_init_list: sas device object list (used only at init time) 719 * @sas_device_lock: 720 * @io_missing_delay: time for IO completed by fw when PDR enabled 721 * @device_missing_delay: time for device missing by fw when PDR enabled 722 * @sas_id : used for setting volume target IDs 723 * @pd_handles : bitmask for PD handles 724 * @pd_handles_sz : size of pd_handle bitmask 725 * @config_page_sz: config page size 726 * @config_page: reserve memory for config page payload 727 * @config_page_dma: 728 * @hba_queue_depth: hba request queue depth 729 * @sge_size: sg element size for either 32/64 bit 730 * @scsiio_depth: SCSI_IO queue depth 731 * @request_sz: per request frame size 732 * @request: pool of request frames 733 * @request_dma: 734 * @request_dma_sz: 735 * @scsi_lookup: firmware request tracker list 736 * @scsi_lookup_lock: 737 * @free_list: free list of request 738 * @chain: pool of chains 739 * @pending_io_count: 740 * @reset_wq: 741 * @chain_dma: 742 * @max_sges_in_main_message: number sg elements in main message 743 * @max_sges_in_chain_message: number sg elements per chain 744 * @chains_needed_per_io: max chains per io 745 * @chain_offset_value_for_main_message: location 1st sg in main 746 * @chain_depth: total chains allocated 747 * @hi_priority_smid: 748 * @hi_priority: 749 * @hi_priority_dma: 750 * @hi_priority_depth: 751 * @hpr_lookup: 752 * @hpr_free_list: 753 * @internal_smid: 754 * @internal: 755 * @internal_dma: 756 * @internal_depth: 757 * @internal_lookup: 758 * @internal_free_list: 759 * @sense: pool of sense 760 * @sense_dma: 761 * @sense_dma_pool: 762 * @reply_depth: hba reply queue depth: 763 * @reply_sz: per reply frame size: 764 * @reply: pool of replys: 765 * @reply_dma: 766 * @reply_dma_pool: 767 * @reply_free_queue_depth: reply free depth 768 * @reply_free: pool for reply free queue (32 bit addr) 769 * @reply_free_dma: 770 * @reply_free_dma_pool: 771 * @reply_free_host_index: tail index in pool to insert free replys 772 * @reply_post_queue_depth: reply post queue depth 773 * @reply_post_free: pool for reply post (64bit descriptor) 774 * @reply_post_free_dma: 775 * @reply_queue_count: number of reply queue's 776 * @reply_queue_list: link list contaning the reply queue info 777 * @reply_post_host_index: head index in the pool where FW completes IO 778 * @delayed_tr_list: target reset link list 779 * @delayed_tr_volume_list: volume target reset link list 780 */ 781 struct MPT2SAS_ADAPTER { 782 struct list_head list; 783 struct Scsi_Host *shost; 784 u8 id; 785 int cpu_count; 786 char name[MPT_NAME_LENGTH]; 787 char tmp_string[MPT_STRING_LENGTH]; 788 struct pci_dev *pdev; 789 Mpi2SystemInterfaceRegs_t __iomem *chip; 790 resource_size_t chip_phys; 791 int logging_level; 792 int fwfault_debug; 793 u8 ir_firmware; 794 int bars; 795 u8 mask_interrupts; 796 797 /* fw fault handler */ 798 char fault_reset_work_q_name[20]; 799 struct workqueue_struct *fault_reset_work_q; 800 struct delayed_work fault_reset_work; 801 802 /* fw event handler */ 803 char firmware_event_name[20]; 804 struct workqueue_struct *firmware_event_thread; 805 spinlock_t fw_event_lock; 806 struct list_head fw_event_list; 807 808 /* misc flags */ 809 int aen_event_read_flag; 810 u8 broadcast_aen_busy; 811 u16 broadcast_aen_pending; 812 u8 shost_recovery; 813 814 struct mutex reset_in_progress_mutex; 815 spinlock_t ioc_reset_in_progress_lock; 816 u8 ioc_link_reset_in_progress; 817 u8 ioc_reset_in_progress_status; 818 819 u8 ignore_loginfos; 820 u8 remove_host; 821 u8 pci_error_recovery; 822 u8 wait_for_discovery_to_complete; 823 struct completion port_enable_done; 824 u8 is_driver_loading; 825 u8 port_enable_failed; 826 827 u8 start_scan; 828 u16 start_scan_failed; 829 830 u8 msix_enable; 831 u16 msix_vector_count; 832 u8 *cpu_msix_table; 833 resource_size_t **reply_post_host_index; 834 u16 cpu_msix_table_sz; 835 u32 ioc_reset_count; 836 MPT2SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds; 837 838 /* internal commands, callback index */ 839 u8 scsi_io_cb_idx; 840 u8 tm_cb_idx; 841 u8 transport_cb_idx; 842 u8 scsih_cb_idx; 843 u8 ctl_cb_idx; 844 u8 base_cb_idx; 845 u8 port_enable_cb_idx; 846 u8 config_cb_idx; 847 u8 tm_tr_cb_idx; 848 u8 tm_tr_volume_cb_idx; 849 u8 tm_sas_control_cb_idx; 850 struct _internal_cmd base_cmds; 851 struct _internal_cmd port_enable_cmds; 852 struct _internal_cmd transport_cmds; 853 struct _internal_cmd scsih_cmds; 854 struct _internal_cmd tm_cmds; 855 struct _internal_cmd ctl_cmds; 856 struct _internal_cmd config_cmds; 857 858 MPT_ADD_SGE base_add_sg_single; 859 860 /* event log */ 861 u32 event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; 862 u32 event_context; 863 void *event_log; 864 u32 event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; 865 866 /* static config pages */ 867 struct mpt2sas_facts facts; 868 struct mpt2sas_port_facts *pfacts; 869 Mpi2ManufacturingPage0_t manu_pg0; 870 Mpi2BiosPage2_t bios_pg2; 871 Mpi2BiosPage3_t bios_pg3; 872 Mpi2IOCPage8_t ioc_pg8; 873 Mpi2IOUnitPage0_t iounit_pg0; 874 Mpi2IOUnitPage1_t iounit_pg1; 875 876 struct _boot_device req_boot_device; 877 struct _boot_device req_alt_boot_device; 878 struct _boot_device current_boot_device; 879 880 /* sas hba, expander, and device list */ 881 struct _sas_node sas_hba; 882 struct list_head sas_expander_list; 883 spinlock_t sas_node_lock; 884 struct list_head sas_device_list; 885 struct list_head sas_device_init_list; 886 spinlock_t sas_device_lock; 887 struct list_head raid_device_list; 888 spinlock_t raid_device_lock; 889 u8 io_missing_delay; 890 u16 device_missing_delay; 891 int sas_id; 892 893 void *pd_handles; 894 u16 pd_handles_sz; 895 896 /* config page */ 897 u16 config_page_sz; 898 void *config_page; 899 dma_addr_t config_page_dma; 900 901 /* scsiio request */ 902 u16 hba_queue_depth; 903 u16 sge_size; 904 u16 scsiio_depth; 905 u16 request_sz; 906 u8 *request; 907 dma_addr_t request_dma; 908 u32 request_dma_sz; 909 struct scsiio_tracker *scsi_lookup; 910 ulong scsi_lookup_pages; 911 spinlock_t scsi_lookup_lock; 912 struct list_head free_list; 913 int pending_io_count; 914 wait_queue_head_t reset_wq; 915 916 /* chain */ 917 struct chain_tracker *chain_lookup; 918 struct list_head free_chain_list; 919 struct dma_pool *chain_dma_pool; 920 ulong chain_pages; 921 u16 max_sges_in_main_message; 922 u16 max_sges_in_chain_message; 923 u16 chains_needed_per_io; 924 u16 chain_offset_value_for_main_message; 925 u32 chain_depth; 926 927 /* hi-priority queue */ 928 u16 hi_priority_smid; 929 u8 *hi_priority; 930 dma_addr_t hi_priority_dma; 931 u16 hi_priority_depth; 932 struct request_tracker *hpr_lookup; 933 struct list_head hpr_free_list; 934 935 /* internal queue */ 936 u16 internal_smid; 937 u8 *internal; 938 dma_addr_t internal_dma; 939 u16 internal_depth; 940 struct request_tracker *internal_lookup; 941 struct list_head internal_free_list; 942 943 /* sense */ 944 u8 *sense; 945 dma_addr_t sense_dma; 946 struct dma_pool *sense_dma_pool; 947 948 /* reply */ 949 u16 reply_sz; 950 u8 *reply; 951 dma_addr_t reply_dma; 952 u32 reply_dma_max_address; 953 u32 reply_dma_min_address; 954 struct dma_pool *reply_dma_pool; 955 956 /* reply free queue */ 957 u16 reply_free_queue_depth; 958 __le32 *reply_free; 959 dma_addr_t reply_free_dma; 960 struct dma_pool *reply_free_dma_pool; 961 u32 reply_free_host_index; 962 963 /* reply post queue */ 964 u16 reply_post_queue_depth; 965 Mpi2ReplyDescriptorsUnion_t *reply_post_free; 966 dma_addr_t reply_post_free_dma; 967 struct dma_pool *reply_post_free_dma_pool; 968 u8 reply_queue_count; 969 struct list_head reply_queue_list; 970 971 struct list_head delayed_tr_list; 972 struct list_head delayed_tr_volume_list; 973 974 /* diag buffer support */ 975 u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT]; 976 u32 diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT]; 977 dma_addr_t diag_buffer_dma[MPI2_DIAG_BUF_TYPE_COUNT]; 978 u8 diag_buffer_status[MPI2_DIAG_BUF_TYPE_COUNT]; 979 u32 unique_id[MPI2_DIAG_BUF_TYPE_COUNT]; 980 Mpi2ManufacturingPage10_t manu_pg10; 981 u32 product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23]; 982 u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT]; 983 u32 ring_buffer_offset; 984 u32 ring_buffer_sz; 985 u8 is_warpdrive; 986 u8 hide_ir_msg; 987 u8 mfg_pg10_hide_flag; 988 u8 hide_drives; 989 990 }; 991 992 typedef u8 (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, 993 u32 reply); 994 995 996 /* base shared API */ 997 extern struct list_head mpt2sas_ioc_list; 998 void mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc); 999 void mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc); 1000 1001 int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc); 1002 void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc); 1003 int mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc); 1004 void mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc); 1005 int mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, 1006 enum reset_type type); 1007 1008 void *mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid); 1009 void *mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid); 1010 void mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr); 1011 __le32 mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, 1012 u16 smid); 1013 void mpt2sas_base_flush_reply_queues(struct MPT2SAS_ADAPTER *ioc); 1014 1015 /* hi-priority queue */ 1016 u16 mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx); 1017 u16 mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx, 1018 struct scsi_cmnd *scmd); 1019 1020 u16 mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx); 1021 void mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid); 1022 void mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, 1023 u16 handle); 1024 void mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid); 1025 void mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid, 1026 u16 io_index); 1027 void mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid); 1028 void mpt2sas_base_initialize_callback_handler(void); 1029 u8 mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func); 1030 void mpt2sas_base_release_callback_handler(u8 cb_idx); 1031 1032 u8 mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, 1033 u32 reply); 1034 u8 mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, 1035 u8 msix_index, u32 reply); 1036 void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr); 1037 1038 u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked); 1039 1040 void mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code); 1041 int mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc, 1042 Mpi2SasIoUnitControlReply_t *mpi_reply, Mpi2SasIoUnitControlRequest_t 1043 *mpi_request); 1044 int mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc, 1045 Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request); 1046 void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type); 1047 1048 void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc); 1049 1050 void mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc, 1051 u16 device_missing_delay, u8 io_missing_delay); 1052 1053 int mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc); 1054 1055 /* scsih shared API */ 1056 u8 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, 1057 u32 reply); 1058 int mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, 1059 uint channel, uint id, uint lun, u8 type, u16 smid_task, 1060 ulong timeout, unsigned long serial_number, enum mutex_type m_type); 1061 void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle); 1062 void mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle); 1063 void mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address); 1064 void mpt2sas_device_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address); 1065 struct _sas_node *mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, 1066 u16 handle); 1067 struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER 1068 *ioc, u64 sas_address); 1069 struct _sas_device *mpt2sas_scsih_sas_device_find_by_sas_address( 1070 struct MPT2SAS_ADAPTER *ioc, u64 sas_address); 1071 1072 void mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc); 1073 1074 void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase); 1075 1076 /* config shared API */ 1077 u8 mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, 1078 u32 reply); 1079 int mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys); 1080 int mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc, 1081 Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page); 1082 int mpt2sas_config_get_manufacturing_pg10(struct MPT2SAS_ADAPTER *ioc, 1083 Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage10_t *config_page); 1084 int mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1085 *mpi_reply, Mpi2BiosPage2_t *config_page); 1086 int mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1087 *mpi_reply, Mpi2BiosPage3_t *config_page); 1088 int mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1089 *mpi_reply, Mpi2IOUnitPage0_t *config_page); 1090 int mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1091 *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle); 1092 int mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1093 *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle); 1094 int mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1095 *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz); 1096 int mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1097 *mpi_reply, Mpi2IOUnitPage1_t *config_page); 1098 int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1099 *mpi_reply, Mpi2IOUnitPage1_t *config_page); 1100 int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1101 *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz); 1102 int mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, 1103 Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz); 1104 int mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1105 *mpi_reply, Mpi2IOCPage8_t *config_page); 1106 int mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1107 *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle); 1108 int mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1109 *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number, u16 handle); 1110 int mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1111 *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle); 1112 int mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1113 *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number); 1114 int mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1115 *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number); 1116 int mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1117 *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, u32 handle); 1118 int mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 *num_pds); 1119 int mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1120 *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, u32 handle, u16 sz); 1121 int mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1122 *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form, 1123 u32 form_specific); 1124 int mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle, 1125 u16 *volume_handle); 1126 int mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER *ioc, u16 volume_handle, 1127 u64 *wwid); 1128 /* ctl shared API */ 1129 extern struct device_attribute *mpt2sas_host_attrs[]; 1130 extern struct device_attribute *mpt2sas_dev_attrs[]; 1131 void mpt2sas_ctl_init(void); 1132 void mpt2sas_ctl_exit(void); 1133 u8 mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, 1134 u32 reply); 1135 void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase); 1136 u8 mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, 1137 u32 reply); 1138 void mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc, 1139 Mpi2EventNotificationReply_t *mpi_reply); 1140 1141 void mpt2sas_enable_diag_buffer(struct MPT2SAS_ADAPTER *ioc, 1142 u8 bits_to_regsiter); 1143 1144 /* transport shared API */ 1145 u8 mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, 1146 u32 reply); 1147 struct _sas_port *mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc, 1148 u16 handle, u64 sas_address); 1149 void mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, 1150 u64 sas_address_parent); 1151 int mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy 1152 *mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev); 1153 int mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy 1154 *mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev); 1155 void mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER *ioc, 1156 u64 sas_address, u16 handle, u8 phy_number, u8 link_rate); 1157 extern struct sas_function_template mpt2sas_transport_functions; 1158 extern struct scsi_transport_template *mpt2sas_transport_template; 1159 extern int scsi_internal_device_block(struct scsi_device *sdev); 1160 extern u8 mpt2sas_stm_zero_smid_handler(struct MPT2SAS_ADAPTER *ioc, 1161 u8 msix_index, u32 reply); 1162 extern int scsi_internal_device_unblock(struct scsi_device *sdev); 1163 1164 #endif /* MPT2SAS_BASE_H_INCLUDED */ 1165