1 /*
2  * Copyright (c) 2008, 2009 open80211s Ltd.
3  * Authors:    Luis Carlos Cobo <luisca@cozybit.com>
4  * 	       Javier Cardona <javier@cozybit.com>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10 
11 #include <linux/slab.h>
12 #include <asm/unaligned.h>
13 #include "ieee80211_i.h"
14 #include "mesh.h"
15 
16 #define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ)
17 #define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ)
18 #define IEEE80211_MESH_RANN_INTERVAL	     (1 * HZ)
19 
20 #define MESHCONF_CAPAB_ACCEPT_PLINKS 0x01
21 #define MESHCONF_CAPAB_FORWARDING    0x08
22 
23 #define TMR_RUNNING_HK	0
24 #define TMR_RUNNING_MP	1
25 #define TMR_RUNNING_MPR	2
26 
27 int mesh_allocated;
28 static struct kmem_cache *rm_cache;
29 
ieee80211s_init(void)30 void ieee80211s_init(void)
31 {
32 	mesh_pathtbl_init();
33 	mesh_allocated = 1;
34 	rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry),
35 				     0, 0, NULL);
36 }
37 
ieee80211s_stop(void)38 void ieee80211s_stop(void)
39 {
40 	mesh_pathtbl_unregister();
41 	kmem_cache_destroy(rm_cache);
42 }
43 
ieee80211_mesh_housekeeping_timer(unsigned long data)44 static void ieee80211_mesh_housekeeping_timer(unsigned long data)
45 {
46 	struct ieee80211_sub_if_data *sdata = (void *) data;
47 	struct ieee80211_local *local = sdata->local;
48 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
49 
50 	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
51 
52 	if (local->quiescing) {
53 		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
54 		return;
55 	}
56 
57 	ieee80211_queue_work(&local->hw, &sdata->work);
58 }
59 
60 /**
61  * mesh_matches_local - check if the config of a mesh point matches ours
62  *
63  * @ie: information elements of a management frame from the mesh peer
64  * @sdata: local mesh subif
65  *
66  * This function checks if the mesh configuration of a mesh point matches the
67  * local mesh configuration, i.e. if both nodes belong to the same mesh network.
68  */
mesh_matches_local(struct ieee802_11_elems * ie,struct ieee80211_sub_if_data * sdata)69 bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_data *sdata)
70 {
71 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
72 
73 	/*
74 	 * As support for each feature is added, check for matching
75 	 * - On mesh config capabilities
76 	 *   - Power Save Support En
77 	 *   - Sync support enabled
78 	 *   - Sync support active
79 	 *   - Sync support required from peer
80 	 *   - MDA enabled
81 	 * - Power management control on fc
82 	 */
83 	if (ifmsh->mesh_id_len == ie->mesh_id_len &&
84 		memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
85 		(ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) &&
86 		(ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) &&
87 		(ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) &&
88 		(ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) &&
89 		(ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth))
90 		return true;
91 
92 	return false;
93 }
94 
95 /**
96  * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
97  *
98  * @ie: information elements of a management frame from the mesh peer
99  */
mesh_peer_accepts_plinks(struct ieee802_11_elems * ie)100 bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
101 {
102 	return (ie->mesh_config->meshconf_cap &
103 	    MESHCONF_CAPAB_ACCEPT_PLINKS) != 0;
104 }
105 
106 /**
107  * mesh_accept_plinks_update: update accepting_plink in local mesh beacons
108  *
109  * @sdata: mesh interface in which mesh beacons are going to be updated
110  */
mesh_accept_plinks_update(struct ieee80211_sub_if_data * sdata)111 void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata)
112 {
113 	bool free_plinks;
114 
115 	/* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
116 	 * the mesh interface might be able to establish plinks with peers that
117 	 * are already on the table but are not on PLINK_ESTAB state. However,
118 	 * in general the mesh interface is not accepting peer link requests
119 	 * from new peers, and that must be reflected in the beacon
120 	 */
121 	free_plinks = mesh_plink_availables(sdata);
122 
123 	if (free_plinks != sdata->u.mesh.accepting_plinks)
124 		ieee80211_mesh_housekeeping_timer((unsigned long) sdata);
125 }
126 
mesh_rmc_init(struct ieee80211_sub_if_data * sdata)127 int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
128 {
129 	int i;
130 
131 	sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL);
132 	if (!sdata->u.mesh.rmc)
133 		return -ENOMEM;
134 	sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1;
135 	for (i = 0; i < RMC_BUCKETS; i++)
136 		INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i].list);
137 	return 0;
138 }
139 
mesh_rmc_free(struct ieee80211_sub_if_data * sdata)140 void mesh_rmc_free(struct ieee80211_sub_if_data *sdata)
141 {
142 	struct mesh_rmc *rmc = sdata->u.mesh.rmc;
143 	struct rmc_entry *p, *n;
144 	int i;
145 
146 	if (!sdata->u.mesh.rmc)
147 		return;
148 
149 	for (i = 0; i < RMC_BUCKETS; i++)
150 		list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) {
151 			list_del(&p->list);
152 			kmem_cache_free(rm_cache, p);
153 		}
154 
155 	kfree(rmc);
156 	sdata->u.mesh.rmc = NULL;
157 }
158 
159 /**
160  * mesh_rmc_check - Check frame in recent multicast cache and add if absent.
161  *
162  * @sa:		source address
163  * @mesh_hdr:	mesh_header
164  *
165  * Returns: 0 if the frame is not in the cache, nonzero otherwise.
166  *
167  * Checks using the source address and the mesh sequence number if we have
168  * received this frame lately. If the frame is not in the cache, it is added to
169  * it.
170  */
mesh_rmc_check(u8 * sa,struct ieee80211s_hdr * mesh_hdr,struct ieee80211_sub_if_data * sdata)171 int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr,
172 		   struct ieee80211_sub_if_data *sdata)
173 {
174 	struct mesh_rmc *rmc = sdata->u.mesh.rmc;
175 	u32 seqnum = 0;
176 	int entries = 0;
177 	u8 idx;
178 	struct rmc_entry *p, *n;
179 
180 	/* Don't care about endianness since only match matters */
181 	memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum));
182 	idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask;
183 	list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) {
184 		++entries;
185 		if (time_after(jiffies, p->exp_time) ||
186 				(entries == RMC_QUEUE_MAX_LEN)) {
187 			list_del(&p->list);
188 			kmem_cache_free(rm_cache, p);
189 			--entries;
190 		} else if ((seqnum == p->seqnum) &&
191 			   (memcmp(sa, p->sa, ETH_ALEN) == 0))
192 			return -1;
193 	}
194 
195 	p = kmem_cache_alloc(rm_cache, GFP_ATOMIC);
196 	if (!p) {
197 		printk(KERN_DEBUG "o11s: could not allocate RMC entry\n");
198 		return 0;
199 	}
200 	p->seqnum = seqnum;
201 	p->exp_time = jiffies + RMC_TIMEOUT;
202 	memcpy(p->sa, sa, ETH_ALEN);
203 	list_add(&p->list, &rmc->bucket[idx].list);
204 	return 0;
205 }
206 
mesh_mgmt_ies_add(struct sk_buff * skb,struct ieee80211_sub_if_data * sdata)207 void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
208 {
209 	struct ieee80211_local *local = sdata->local;
210 	struct ieee80211_supported_band *sband;
211 	u8 *pos;
212 	int len, i, rate;
213 	u8 neighbors;
214 
215 	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
216 	len = sband->n_bitrates;
217 	if (len > 8)
218 		len = 8;
219 	pos = skb_put(skb, len + 2);
220 	*pos++ = WLAN_EID_SUPP_RATES;
221 	*pos++ = len;
222 	for (i = 0; i < len; i++) {
223 		rate = sband->bitrates[i].bitrate;
224 		*pos++ = (u8) (rate / 5);
225 	}
226 
227 	if (sband->n_bitrates > len) {
228 		pos = skb_put(skb, sband->n_bitrates - len + 2);
229 		*pos++ = WLAN_EID_EXT_SUPP_RATES;
230 		*pos++ = sband->n_bitrates - len;
231 		for (i = len; i < sband->n_bitrates; i++) {
232 			rate = sband->bitrates[i].bitrate;
233 			*pos++ = (u8) (rate / 5);
234 		}
235 	}
236 
237 	if (sband->band == IEEE80211_BAND_2GHZ) {
238 		pos = skb_put(skb, 2 + 1);
239 		*pos++ = WLAN_EID_DS_PARAMS;
240 		*pos++ = 1;
241 		*pos++ = ieee80211_frequency_to_channel(local->hw.conf.channel->center_freq);
242 	}
243 
244 	pos = skb_put(skb, 2 + sdata->u.mesh.mesh_id_len);
245 	*pos++ = WLAN_EID_MESH_ID;
246 	*pos++ = sdata->u.mesh.mesh_id_len;
247 	if (sdata->u.mesh.mesh_id_len)
248 		memcpy(pos, sdata->u.mesh.mesh_id, sdata->u.mesh.mesh_id_len);
249 
250 	pos = skb_put(skb, 2 + sizeof(struct ieee80211_meshconf_ie));
251 	*pos++ = WLAN_EID_MESH_CONFIG;
252 	*pos++ = sizeof(struct ieee80211_meshconf_ie);
253 
254 	/* Active path selection protocol ID */
255 	*pos++ = sdata->u.mesh.mesh_pp_id;
256 
257 	/* Active path selection metric ID   */
258 	*pos++ = sdata->u.mesh.mesh_pm_id;
259 
260 	/* Congestion control mode identifier */
261 	*pos++ = sdata->u.mesh.mesh_cc_id;
262 
263 	/* Synchronization protocol identifier */
264 	*pos++ = sdata->u.mesh.mesh_sp_id;
265 
266 	/* Authentication Protocol identifier */
267 	*pos++ = sdata->u.mesh.mesh_auth_id;
268 
269 	/* Mesh Formation Info - number of neighbors */
270 	neighbors = atomic_read(&sdata->u.mesh.mshstats.estab_plinks);
271 	/* Number of neighbor mesh STAs or 15 whichever is smaller */
272 	neighbors = (neighbors > 15) ? 15 : neighbors;
273 	*pos++ = neighbors << 1;
274 
275 	/* Mesh capability */
276 	sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata);
277 	*pos = MESHCONF_CAPAB_FORWARDING;
278 	*pos++ |= sdata->u.mesh.accepting_plinks ?
279 	    MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
280 	*pos++ = 0x00;
281 
282 	if (sdata->u.mesh.vendor_ie) {
283 		int len = sdata->u.mesh.vendor_ie_len;
284 		const u8 *data = sdata->u.mesh.vendor_ie;
285 		if (skb_tailroom(skb) > len)
286 			memcpy(skb_put(skb, len), data, len);
287 	}
288 }
289 
mesh_table_hash(u8 * addr,struct ieee80211_sub_if_data * sdata,struct mesh_table * tbl)290 u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl)
291 {
292 	/* Use last four bytes of hw addr and interface index as hash index */
293 	return jhash_2words(*(u32 *)(addr+2), sdata->dev->ifindex, tbl->hash_rnd)
294 		& tbl->hash_mask;
295 }
296 
mesh_table_alloc(int size_order)297 struct mesh_table *mesh_table_alloc(int size_order)
298 {
299 	int i;
300 	struct mesh_table *newtbl;
301 
302 	newtbl = kmalloc(sizeof(struct mesh_table), GFP_KERNEL);
303 	if (!newtbl)
304 		return NULL;
305 
306 	newtbl->hash_buckets = kzalloc(sizeof(struct hlist_head) *
307 			(1 << size_order), GFP_KERNEL);
308 
309 	if (!newtbl->hash_buckets) {
310 		kfree(newtbl);
311 		return NULL;
312 	}
313 
314 	newtbl->hashwlock = kmalloc(sizeof(spinlock_t) *
315 			(1 << size_order), GFP_KERNEL);
316 	if (!newtbl->hashwlock) {
317 		kfree(newtbl->hash_buckets);
318 		kfree(newtbl);
319 		return NULL;
320 	}
321 
322 	newtbl->size_order = size_order;
323 	newtbl->hash_mask = (1 << size_order) - 1;
324 	atomic_set(&newtbl->entries,  0);
325 	get_random_bytes(&newtbl->hash_rnd,
326 			sizeof(newtbl->hash_rnd));
327 	for (i = 0; i <= newtbl->hash_mask; i++)
328 		spin_lock_init(&newtbl->hashwlock[i]);
329 
330 	return newtbl;
331 }
332 
333 
ieee80211_mesh_path_timer(unsigned long data)334 static void ieee80211_mesh_path_timer(unsigned long data)
335 {
336 	struct ieee80211_sub_if_data *sdata =
337 		(struct ieee80211_sub_if_data *) data;
338 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
339 	struct ieee80211_local *local = sdata->local;
340 
341 	if (local->quiescing) {
342 		set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
343 		return;
344 	}
345 
346 	ieee80211_queue_work(&local->hw, &sdata->work);
347 }
348 
ieee80211_mesh_path_root_timer(unsigned long data)349 static void ieee80211_mesh_path_root_timer(unsigned long data)
350 {
351 	struct ieee80211_sub_if_data *sdata =
352 		(struct ieee80211_sub_if_data *) data;
353 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
354 	struct ieee80211_local *local = sdata->local;
355 
356 	set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
357 
358 	if (local->quiescing) {
359 		set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
360 		return;
361 	}
362 
363 	ieee80211_queue_work(&local->hw, &sdata->work);
364 }
365 
ieee80211_mesh_root_setup(struct ieee80211_if_mesh * ifmsh)366 void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh)
367 {
368 	if (ifmsh->mshcfg.dot11MeshHWMPRootMode)
369 		set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
370 	else {
371 		clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
372 		/* stop running timer */
373 		del_timer_sync(&ifmsh->mesh_path_root_timer);
374 	}
375 }
376 
377 /**
378  * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
379  * @hdr:    	802.11 frame header
380  * @fc:		frame control field
381  * @meshda:	destination address in the mesh
382  * @meshsa:	source address address in the mesh.  Same as TA, as frame is
383  *              locally originated.
384  *
385  * Return the length of the 802.11 (does not include a mesh control header)
386  */
ieee80211_fill_mesh_addresses(struct ieee80211_hdr * hdr,__le16 * fc,const u8 * meshda,const u8 * meshsa)387 int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
388 				  const u8 *meshda, const u8 *meshsa)
389 {
390 	if (is_multicast_ether_addr(meshda)) {
391 		*fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
392 		/* DA TA SA */
393 		memcpy(hdr->addr1, meshda, ETH_ALEN);
394 		memcpy(hdr->addr2, meshsa, ETH_ALEN);
395 		memcpy(hdr->addr3, meshsa, ETH_ALEN);
396 		return 24;
397 	} else {
398 		*fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS |
399 				IEEE80211_FCTL_TODS);
400 		/* RA TA DA SA */
401 		memset(hdr->addr1, 0, ETH_ALEN);   /* RA is resolved later */
402 		memcpy(hdr->addr2, meshsa, ETH_ALEN);
403 		memcpy(hdr->addr3, meshda, ETH_ALEN);
404 		memcpy(hdr->addr4, meshsa, ETH_ALEN);
405 		return 30;
406 	}
407 }
408 
409 /**
410  * ieee80211_new_mesh_header - create a new mesh header
411  * @meshhdr:    uninitialized mesh header
412  * @sdata:	mesh interface to be used
413  * @addr4or5:   1st address in the ae header, which may correspond to address 4
414  *              (if addr6 is NULL) or address 5 (if addr6 is present). It may
415  *              be NULL.
416  * @addr6:	2nd address in the ae header, which corresponds to addr6 of the
417  *              mesh frame
418  *
419  * Return the header length.
420  */
ieee80211_new_mesh_header(struct ieee80211s_hdr * meshhdr,struct ieee80211_sub_if_data * sdata,char * addr4or5,char * addr6)421 int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
422 		struct ieee80211_sub_if_data *sdata, char *addr4or5,
423 		char *addr6)
424 {
425 	int aelen = 0;
426 	BUG_ON(!addr4or5 && addr6);
427 	memset(meshhdr, 0, sizeof(*meshhdr));
428 	meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
429 	put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum);
430 	sdata->u.mesh.mesh_seqnum++;
431 	if (addr4or5 && !addr6) {
432 		meshhdr->flags |= MESH_FLAGS_AE_A4;
433 		aelen += ETH_ALEN;
434 		memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
435 	} else if (addr4or5 && addr6) {
436 		meshhdr->flags |= MESH_FLAGS_AE_A5_A6;
437 		aelen += 2 * ETH_ALEN;
438 		memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
439 		memcpy(meshhdr->eaddr2, addr6, ETH_ALEN);
440 	}
441 	return 6 + aelen;
442 }
443 
ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data * sdata,struct ieee80211_if_mesh * ifmsh)444 static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata,
445 			   struct ieee80211_if_mesh *ifmsh)
446 {
447 	bool free_plinks;
448 
449 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
450 	printk(KERN_DEBUG "%s: running mesh housekeeping\n",
451 	       sdata->name);
452 #endif
453 
454 	ieee80211_sta_expire(sdata, IEEE80211_MESH_PEER_INACTIVITY_LIMIT);
455 	mesh_path_expire(sdata);
456 
457 	free_plinks = mesh_plink_availables(sdata);
458 	if (free_plinks != sdata->u.mesh.accepting_plinks)
459 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
460 
461 	mod_timer(&ifmsh->housekeeping_timer,
462 		  round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
463 }
464 
ieee80211_mesh_rootpath(struct ieee80211_sub_if_data * sdata)465 static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata)
466 {
467 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
468 
469 	mesh_path_tx_root_frame(sdata);
470 	mod_timer(&ifmsh->mesh_path_root_timer,
471 		  round_jiffies(jiffies + IEEE80211_MESH_RANN_INTERVAL));
472 }
473 
474 #ifdef CONFIG_PM
ieee80211_mesh_quiesce(struct ieee80211_sub_if_data * sdata)475 void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata)
476 {
477 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
478 
479 	/* use atomic bitops in case both timers fire at the same time */
480 
481 	if (del_timer_sync(&ifmsh->housekeeping_timer))
482 		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
483 	if (del_timer_sync(&ifmsh->mesh_path_timer))
484 		set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
485 	if (del_timer_sync(&ifmsh->mesh_path_root_timer))
486 		set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
487 }
488 
ieee80211_mesh_restart(struct ieee80211_sub_if_data * sdata)489 void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
490 {
491 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
492 
493 	if (test_and_clear_bit(TMR_RUNNING_HK, &ifmsh->timers_running))
494 		add_timer(&ifmsh->housekeeping_timer);
495 	if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running))
496 		add_timer(&ifmsh->mesh_path_timer);
497 	if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running))
498 		add_timer(&ifmsh->mesh_path_root_timer);
499 	ieee80211_mesh_root_setup(ifmsh);
500 }
501 #endif
502 
ieee80211_start_mesh(struct ieee80211_sub_if_data * sdata)503 void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
504 {
505 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
506 	struct ieee80211_local *local = sdata->local;
507 
508 	local->fif_other_bss++;
509 	/* mesh ifaces must set allmulti to forward mcast traffic */
510 	atomic_inc(&local->iff_allmultis);
511 	ieee80211_configure_filter(local);
512 
513 	ifmsh->mesh_cc_id = 0;	/* Disabled */
514 	ifmsh->mesh_sp_id = 0;	/* Neighbor Offset */
515 	ifmsh->mesh_auth_id = 0;	/* Disabled */
516 	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
517 	ieee80211_mesh_root_setup(ifmsh);
518 	ieee80211_queue_work(&local->hw, &sdata->work);
519 	sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
520 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
521 						BSS_CHANGED_BEACON_ENABLED |
522 						BSS_CHANGED_BEACON_INT);
523 }
524 
ieee80211_stop_mesh(struct ieee80211_sub_if_data * sdata)525 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
526 {
527 	struct ieee80211_local *local = sdata->local;
528 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
529 
530 	ifmsh->mesh_id_len = 0;
531 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
532 	sta_info_flush(local, NULL);
533 
534 	del_timer_sync(&sdata->u.mesh.housekeeping_timer);
535 	del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
536 	/*
537 	 * If the timer fired while we waited for it, it will have
538 	 * requeued the work. Now the work will be running again
539 	 * but will not rearm the timer again because it checks
540 	 * whether the interface is running, which, at this point,
541 	 * it no longer is.
542 	 */
543 	cancel_work_sync(&sdata->work);
544 
545 	local->fif_other_bss--;
546 	atomic_dec(&local->iff_allmultis);
547 	ieee80211_configure_filter(local);
548 }
549 
ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data * sdata,u16 stype,struct ieee80211_mgmt * mgmt,size_t len,struct ieee80211_rx_status * rx_status)550 static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
551 					u16 stype,
552 					struct ieee80211_mgmt *mgmt,
553 					size_t len,
554 					struct ieee80211_rx_status *rx_status)
555 {
556 	struct ieee80211_local *local = sdata->local;
557 	struct ieee802_11_elems elems;
558 	struct ieee80211_channel *channel;
559 	u32 supp_rates = 0;
560 	size_t baselen;
561 	int freq;
562 	enum ieee80211_band band = rx_status->band;
563 
564 	/* ignore ProbeResp to foreign address */
565 	if (stype == IEEE80211_STYPE_PROBE_RESP &&
566 	    compare_ether_addr(mgmt->da, sdata->vif.addr))
567 		return;
568 
569 	baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
570 	if (baselen > len)
571 		return;
572 
573 	ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
574 			       &elems);
575 
576 	if (elems.ds_params && elems.ds_params_len == 1)
577 		freq = ieee80211_channel_to_frequency(elems.ds_params[0], band);
578 	else
579 		freq = rx_status->freq;
580 
581 	channel = ieee80211_get_channel(local->hw.wiphy, freq);
582 
583 	if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
584 		return;
585 
586 	if (elems.mesh_id && elems.mesh_config &&
587 	    mesh_matches_local(&elems, sdata)) {
588 		supp_rates = ieee80211_sta_get_rates(local, &elems, band);
589 
590 		mesh_neighbour_update(mgmt->sa, supp_rates, sdata,
591 				      mesh_peer_accepts_plinks(&elems));
592 	}
593 }
594 
ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data * sdata,struct ieee80211_mgmt * mgmt,size_t len,struct ieee80211_rx_status * rx_status)595 static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
596 					  struct ieee80211_mgmt *mgmt,
597 					  size_t len,
598 					  struct ieee80211_rx_status *rx_status)
599 {
600 	switch (mgmt->u.action.category) {
601 	case WLAN_CATEGORY_MESH_PLINK:
602 		mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
603 		break;
604 	case WLAN_CATEGORY_MESH_PATH_SEL:
605 		mesh_rx_path_sel_frame(sdata, mgmt, len);
606 		break;
607 	}
608 }
609 
ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data * sdata,struct sk_buff * skb)610 void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
611 				   struct sk_buff *skb)
612 {
613 	struct ieee80211_rx_status *rx_status;
614 	struct ieee80211_if_mesh *ifmsh;
615 	struct ieee80211_mgmt *mgmt;
616 	u16 stype;
617 
618 	ifmsh = &sdata->u.mesh;
619 
620 	rx_status = IEEE80211_SKB_RXCB(skb);
621 	mgmt = (struct ieee80211_mgmt *) skb->data;
622 	stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
623 
624 	switch (stype) {
625 	case IEEE80211_STYPE_PROBE_RESP:
626 	case IEEE80211_STYPE_BEACON:
627 		ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len,
628 					    rx_status);
629 		break;
630 	case IEEE80211_STYPE_ACTION:
631 		ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status);
632 		break;
633 	}
634 }
635 
ieee80211_mesh_work(struct ieee80211_sub_if_data * sdata)636 void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata)
637 {
638 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
639 
640 	if (ifmsh->preq_queue_len &&
641 	    time_after(jiffies,
642 		       ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval)))
643 		mesh_path_start_discovery(sdata);
644 
645 	if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags))
646 		mesh_mpath_table_grow();
647 
648 	if (test_and_clear_bit(MESH_WORK_GROW_MPP_TABLE, &ifmsh->wrkq_flags))
649 		mesh_mpp_table_grow();
650 
651 	if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
652 		ieee80211_mesh_housekeeping(sdata, ifmsh);
653 
654 	if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags))
655 		ieee80211_mesh_rootpath(sdata);
656 }
657 
ieee80211_mesh_notify_scan_completed(struct ieee80211_local * local)658 void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local)
659 {
660 	struct ieee80211_sub_if_data *sdata;
661 
662 	rcu_read_lock();
663 	list_for_each_entry_rcu(sdata, &local->interfaces, list)
664 		if (ieee80211_vif_is_mesh(&sdata->vif))
665 			ieee80211_queue_work(&local->hw, &sdata->work);
666 	rcu_read_unlock();
667 }
668 
ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data * sdata)669 void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
670 {
671 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
672 
673 	setup_timer(&ifmsh->housekeeping_timer,
674 		    ieee80211_mesh_housekeeping_timer,
675 		    (unsigned long) sdata);
676 
677 	ifmsh->accepting_plinks = true;
678 	ifmsh->preq_id = 0;
679 	ifmsh->sn = 0;
680 	atomic_set(&ifmsh->mpaths, 0);
681 	mesh_rmc_init(sdata);
682 	ifmsh->last_preq = jiffies;
683 	/* Allocate all mesh structures when creating the first mesh interface. */
684 	if (!mesh_allocated)
685 		ieee80211s_init();
686 	setup_timer(&ifmsh->mesh_path_timer,
687 		    ieee80211_mesh_path_timer,
688 		    (unsigned long) sdata);
689 	setup_timer(&ifmsh->mesh_path_root_timer,
690 		    ieee80211_mesh_path_root_timer,
691 		    (unsigned long) sdata);
692 	INIT_LIST_HEAD(&ifmsh->preq_queue.list);
693 	spin_lock_init(&ifmsh->mesh_preq_queue_lock);
694 }
695