1 /******************************************************************************
2 * usb_intf.c
3 *
4 * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
5 * Linux device driver for RTL8192SU
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of version 2 of the GNU General Public License as
9 * published by the Free Software Foundation.
10 *
11 * This program is distributed in the hope that it will be useful, but WITHOUT
12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * more details.
15 *
16 * You should have received a copy of the GNU General Public License along with
17 * this program; if not, write to the Free Software Foundation, Inc.,
18 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
19 *
20 * Modifications for inclusion into the Linux staging tree are
21 * Copyright(c) 2010 Larry Finger. All rights reserved.
22 *
23 * Contact information:
24 * WLAN FAE <wlanfae@realtek.com>
25 * Larry Finger <Larry.Finger@lwfinger.net>
26 *
27 ******************************************************************************/
28
29 #define _HCI_INTF_C_
30
31 #include "osdep_service.h"
32 #include "drv_types.h"
33 #include "recv_osdep.h"
34 #include "xmit_osdep.h"
35 #include "rtl8712_efuse.h"
36 #include "usb_vendor_req.h"
37 #include "usb_ops.h"
38 #include "usb_osintf.h"
39
40 #define DRVER "v7_0.20100831"
41
42 static struct usb_interface *pintf;
43
44 static int r871xu_drv_init(struct usb_interface *pusb_intf,
45 const struct usb_device_id *pdid);
46
47 static void r871xu_dev_remove(struct usb_interface *pusb_intf);
48
49 static struct usb_device_id rtl871x_usb_id_tbl[] = {
50
51 /* RTL8188SU */
52 /* Realtek */
53 {USB_DEVICE(0x0BDA, 0x8171)},
54 {USB_DEVICE(0x0bda, 0x8173)},
55 {USB_DEVICE(0x0bda, 0x8712)},
56 {USB_DEVICE(0x0bda, 0x8713)},
57 {USB_DEVICE(0x0bda, 0xC512)},
58 /* Abocom */
59 {USB_DEVICE(0x07B8, 0x8188)},
60 /* ASUS */
61 {USB_DEVICE(0x0B05, 0x1786)},
62 {USB_DEVICE(0x0B05, 0x1791)}, /* 11n mode disable */
63 /* Belkin */
64 {USB_DEVICE(0x050D, 0x945A)},
65 /* Corega */
66 {USB_DEVICE(0x07AA, 0x0047)},
67 /* D-Link */
68 {USB_DEVICE(0x2001, 0x3306)},
69 {USB_DEVICE(0x07D1, 0x3306)}, /* 11n mode disable */
70 /* Edimax */
71 {USB_DEVICE(0x7392, 0x7611)},
72 /* EnGenius */
73 {USB_DEVICE(0x1740, 0x9603)},
74 /* Hawking */
75 {USB_DEVICE(0x0E66, 0x0016)},
76 /* Hercules */
77 {USB_DEVICE(0x06F8, 0xE034)},
78 {USB_DEVICE(0x06F8, 0xE032)},
79 /* Logitec */
80 {USB_DEVICE(0x0789, 0x0167)},
81 /* PCI */
82 {USB_DEVICE(0x2019, 0xAB28)},
83 {USB_DEVICE(0x2019, 0xED16)},
84 /* Sitecom */
85 {USB_DEVICE(0x0DF6, 0x0057)},
86 {USB_DEVICE(0x0DF6, 0x0045)},
87 {USB_DEVICE(0x0DF6, 0x0059)}, /* 11n mode disable */
88 {USB_DEVICE(0x0DF6, 0x004B)},
89 {USB_DEVICE(0x0DF6, 0x0063)},
90 /* Sweex */
91 {USB_DEVICE(0x177F, 0x0154)},
92 /* Thinkware */
93 {USB_DEVICE(0x0BDA, 0x5077)},
94 /* Toshiba */
95 {USB_DEVICE(0x1690, 0x0752)},
96 /* - */
97 {USB_DEVICE(0x20F4, 0x646B)},
98 {USB_DEVICE(0x083A, 0xC512)},
99
100 /* RTL8191SU */
101 /* Realtek */
102 {USB_DEVICE(0x0BDA, 0x8172)},
103 /* Amigo */
104 {USB_DEVICE(0x0EB0, 0x9061)},
105 /* ASUS/EKB */
106 {USB_DEVICE(0x0BDA, 0x8172)},
107 {USB_DEVICE(0x13D3, 0x3323)},
108 {USB_DEVICE(0x13D3, 0x3311)}, /* 11n mode disable */
109 {USB_DEVICE(0x13D3, 0x3342)},
110 /* ASUS/EKBLenovo */
111 {USB_DEVICE(0x13D3, 0x3333)},
112 {USB_DEVICE(0x13D3, 0x3334)},
113 {USB_DEVICE(0x13D3, 0x3335)}, /* 11n mode disable */
114 {USB_DEVICE(0x13D3, 0x3336)}, /* 11n mode disable */
115 /* ASUS/Media BOX */
116 {USB_DEVICE(0x13D3, 0x3309)},
117 /* Belkin */
118 {USB_DEVICE(0x050D, 0x815F)},
119 /* D-Link */
120 {USB_DEVICE(0x07D1, 0x3302)},
121 {USB_DEVICE(0x07D1, 0x3300)},
122 {USB_DEVICE(0x07D1, 0x3303)},
123 /* Edimax */
124 {USB_DEVICE(0x7392, 0x7612)},
125 /* EnGenius */
126 {USB_DEVICE(0x1740, 0x9605)},
127 /* Guillemot */
128 {USB_DEVICE(0x06F8, 0xE031)},
129 /* Hawking */
130 {USB_DEVICE(0x0E66, 0x0015)},
131 /* Mediao */
132 {USB_DEVICE(0x13D3, 0x3306)},
133 /* PCI */
134 {USB_DEVICE(0x2019, 0xED18)},
135 {USB_DEVICE(0x2019, 0x4901)},
136 /* Sitecom */
137 {USB_DEVICE(0x0DF6, 0x0058)},
138 {USB_DEVICE(0x0DF6, 0x0049)},
139 {USB_DEVICE(0x0DF6, 0x004C)},
140 {USB_DEVICE(0x0DF6, 0x0064)},
141 /* Skyworth */
142 {USB_DEVICE(0x14b2, 0x3300)},
143 {USB_DEVICE(0x14b2, 0x3301)},
144 {USB_DEVICE(0x14B2, 0x3302)},
145 /* - */
146 {USB_DEVICE(0x04F2, 0xAFF2)},
147 {USB_DEVICE(0x04F2, 0xAFF5)},
148 {USB_DEVICE(0x04F2, 0xAFF6)},
149 {USB_DEVICE(0x13D3, 0x3339)},
150 {USB_DEVICE(0x13D3, 0x3340)}, /* 11n mode disable */
151 {USB_DEVICE(0x13D3, 0x3341)}, /* 11n mode disable */
152 {USB_DEVICE(0x13D3, 0x3310)},
153 {USB_DEVICE(0x13D3, 0x3325)},
154
155 /* RTL8192SU */
156 /* Realtek */
157 {USB_DEVICE(0x0BDA, 0x8174)},
158 {USB_DEVICE(0x0BDA, 0x8174)},
159 /* Belkin */
160 {USB_DEVICE(0x050D, 0x845A)},
161 /* Corega */
162 {USB_DEVICE(0x07AA, 0x0051)},
163 /* Edimax */
164 {USB_DEVICE(0x7392, 0x7622)},
165 /* NEC */
166 {USB_DEVICE(0x0409, 0x02B6)},
167 {}
168 };
169
170 MODULE_DEVICE_TABLE(usb, rtl871x_usb_id_tbl);
171
172 static struct specific_device_id specific_device_id_tbl[] = {
173 {.idVendor = 0x0b05, .idProduct = 0x1791,
174 .flags = SPEC_DEV_ID_DISABLE_HT},
175 {.idVendor = 0x0df6, .idProduct = 0x0059,
176 .flags = SPEC_DEV_ID_DISABLE_HT},
177 {.idVendor = 0x13d3, .idProduct = 0x3306,
178 .flags = SPEC_DEV_ID_DISABLE_HT},
179 {.idVendor = 0x13D3, .idProduct = 0x3311,
180 .flags = SPEC_DEV_ID_DISABLE_HT},
181 {.idVendor = 0x13d3, .idProduct = 0x3335,
182 .flags = SPEC_DEV_ID_DISABLE_HT},
183 {.idVendor = 0x13d3, .idProduct = 0x3336,
184 .flags = SPEC_DEV_ID_DISABLE_HT},
185 {.idVendor = 0x13d3, .idProduct = 0x3340,
186 .flags = SPEC_DEV_ID_DISABLE_HT},
187 {.idVendor = 0x13d3, .idProduct = 0x3341,
188 .flags = SPEC_DEV_ID_DISABLE_HT},
189 {}
190 };
191
192 struct drv_priv {
193 struct usb_driver r871xu_drv;
194 int drv_registered;
195 };
196
197 #ifdef CONFIG_PM
r871x_suspend(struct usb_interface * pusb_intf,pm_message_t state)198 static int r871x_suspend(struct usb_interface *pusb_intf, pm_message_t state)
199 {
200 struct net_device *pnetdev = usb_get_intfdata(pusb_intf);
201
202 printk(KERN_INFO "r8712: suspending...\n");
203 if (!pnetdev || !netif_running(pnetdev)) {
204 printk(KERN_INFO "r8712: unable to suspend\n");
205 return 0;
206 }
207 if (pnetdev->netdev_ops->ndo_stop)
208 pnetdev->netdev_ops->ndo_stop(pnetdev);
209 mdelay(10);
210 netif_device_detach(pnetdev);
211 return 0;
212 }
213
r871x_resume(struct usb_interface * pusb_intf)214 static int r871x_resume(struct usb_interface *pusb_intf)
215 {
216 struct net_device *pnetdev = usb_get_intfdata(pusb_intf);
217
218 printk(KERN_INFO "r8712: resuming...\n");
219 if (!pnetdev || !netif_running(pnetdev)) {
220 printk(KERN_INFO "r8712: unable to resume\n");
221 return 0;
222 }
223 netif_device_attach(pnetdev);
224 if (pnetdev->netdev_ops->ndo_open)
225 pnetdev->netdev_ops->ndo_open(pnetdev);
226 return 0;
227 }
228
r871x_reset_resume(struct usb_interface * pusb_intf)229 static int r871x_reset_resume(struct usb_interface *pusb_intf)
230 {
231 /* dummy routine */
232 return 0;
233 }
234
235 #endif
236
237 static struct drv_priv drvpriv = {
238 .r871xu_drv.name = "r8712u",
239 .r871xu_drv.id_table = rtl871x_usb_id_tbl,
240 .r871xu_drv.probe = r871xu_drv_init,
241 .r871xu_drv.disconnect = r871xu_dev_remove,
242 #ifdef CONFIG_PM
243 .r871xu_drv.suspend = r871x_suspend,
244 .r871xu_drv.resume = r871x_resume,
245 .r871xu_drv.reset_resume = r871x_reset_resume,
246 #endif
247 };
248
r8712_usb_dvobj_init(struct _adapter * padapter)249 static uint r8712_usb_dvobj_init(struct _adapter *padapter)
250 {
251 uint status = _SUCCESS;
252 struct usb_device_descriptor *pdev_desc;
253 struct usb_host_config *phost_conf;
254 struct usb_config_descriptor *pconf_desc;
255 struct usb_host_interface *phost_iface;
256 struct usb_interface_descriptor *piface_desc;
257 struct dvobj_priv *pdvobjpriv = &padapter->dvobjpriv;
258 struct usb_device *pusbd = pdvobjpriv->pusbdev;
259
260 pdvobjpriv->padapter = padapter;
261 padapter->EepromAddressSize = 6;
262 pdev_desc = &pusbd->descriptor;
263 phost_conf = pusbd->actconfig;
264 pconf_desc = &phost_conf->desc;
265 phost_iface = &pintf->altsetting[0];
266 piface_desc = &phost_iface->desc;
267 pdvobjpriv->nr_endpoint = piface_desc->bNumEndpoints;
268 if (pusbd->speed == USB_SPEED_HIGH) {
269 pdvobjpriv->ishighspeed = true;
270 printk(KERN_INFO "r8712u: USB_SPEED_HIGH with %d endpoints\n",
271 pdvobjpriv->nr_endpoint);
272 } else {
273 pdvobjpriv->ishighspeed = false;
274 printk(KERN_INFO "r8712u: USB_SPEED_LOW with %d endpoints\n",
275 pdvobjpriv->nr_endpoint);
276 }
277 if ((r8712_alloc_io_queue(padapter)) == _FAIL)
278 status = _FAIL;
279 sema_init(&(padapter->dvobjpriv.usb_suspend_sema), 0);
280 return status;
281 }
282
r8712_usb_dvobj_deinit(struct _adapter * padapter)283 static void r8712_usb_dvobj_deinit(struct _adapter *padapter)
284 {
285 }
286
rtl871x_intf_stop(struct _adapter * padapter)287 void rtl871x_intf_stop(struct _adapter *padapter)
288 {
289 /*disable_hw_interrupt*/
290 if (padapter->bSurpriseRemoved == false) {
291 /*device still exists, so driver can do i/o operation
292 * TODO: */
293 }
294
295 /* cancel in irp */
296 if (padapter->dvobjpriv.inirp_deinit != NULL)
297 padapter->dvobjpriv.inirp_deinit(padapter);
298 /* cancel out irp */
299 r8712_usb_write_port_cancel(padapter);
300 /* TODO:cancel other irps */
301 }
302
r871x_dev_unload(struct _adapter * padapter)303 void r871x_dev_unload(struct _adapter *padapter)
304 {
305 if (padapter->bup == true) {
306 /*s1.*/
307 padapter->bDriverStopped = true;
308
309 /*s3.*/
310 rtl871x_intf_stop(padapter);
311
312 /*s4.*/
313 r8712_stop_drv_threads(padapter);
314
315 /*s5.*/
316 if (padapter->bSurpriseRemoved == false) {
317 padapter->hw_init_completed = false;
318 rtl8712_hal_deinit(padapter);
319 }
320
321 /*s6.*/
322 if (padapter->dvobj_deinit)
323 padapter->dvobj_deinit(padapter);
324 padapter->bup = false;
325 }
326 }
327
disable_ht_for_spec_devid(const struct usb_device_id * pdid,struct _adapter * padapter)328 static void disable_ht_for_spec_devid(const struct usb_device_id *pdid,
329 struct _adapter *padapter)
330 {
331 u16 vid, pid;
332 u32 flags;
333 int i;
334 int num = sizeof(specific_device_id_tbl) /
335 sizeof(struct specific_device_id);
336
337 for (i = 0; i < num; i++) {
338 vid = specific_device_id_tbl[i].idVendor;
339 pid = specific_device_id_tbl[i].idProduct;
340 flags = specific_device_id_tbl[i].flags;
341
342 if ((pdid->idVendor == vid) && (pdid->idProduct == pid) &&
343 (flags&SPEC_DEV_ID_DISABLE_HT)) {
344 padapter->registrypriv.ht_enable = 0;
345 padapter->registrypriv.cbw40_enable = 0;
346 padapter->registrypriv.ampdu_enable = 0;
347 }
348 }
349 }
350
key_2char2num(u8 hch,u8 lch)351 static u8 key_2char2num(u8 hch, u8 lch)
352 {
353 return (hex_to_bin(hch) << 4) | hex_to_bin(lch);
354 }
355
356 /*
357 * drv_init() - a device potentially for us
358 *
359 * notes: drv_init() is called when the bus driver has located a card for us
360 * to support. We accept the new device by returning 0.
361 */
r871xu_drv_init(struct usb_interface * pusb_intf,const struct usb_device_id * pdid)362 static int r871xu_drv_init(struct usb_interface *pusb_intf,
363 const struct usb_device_id *pdid)
364 {
365 uint status;
366 struct _adapter *padapter = NULL;
367 struct dvobj_priv *pdvobjpriv;
368 struct net_device *pnetdev;
369
370 printk(KERN_INFO "r8712u: DriverVersion: %s\n", DRVER);
371 /* In this probe function, O.S. will provide the usb interface pointer
372 * to driver. We have to increase the reference count of the usb device
373 * structure by using the usb_get_dev function.
374 */
375 usb_get_dev(interface_to_usbdev(pusb_intf));
376 pintf = pusb_intf;
377 /* step 1. */
378 pnetdev = r8712_init_netdev();
379 if (!pnetdev)
380 goto error;
381 padapter = (struct _adapter *)_netdev_priv(pnetdev);
382 disable_ht_for_spec_devid(pdid, padapter);
383 pdvobjpriv = &padapter->dvobjpriv;
384 pdvobjpriv->padapter = padapter;
385 padapter->dvobjpriv.pusbdev = interface_to_usbdev(pusb_intf);
386 usb_set_intfdata(pusb_intf, pnetdev);
387 SET_NETDEV_DEV(pnetdev, &pusb_intf->dev);
388 /* step 2. */
389 padapter->dvobj_init = &r8712_usb_dvobj_init;
390 padapter->dvobj_deinit = &r8712_usb_dvobj_deinit;
391 padapter->halpriv.hal_bus_init = &r8712_usb_hal_bus_init;
392 padapter->dvobjpriv.inirp_init = &r8712_usb_inirp_init;
393 padapter->dvobjpriv.inirp_deinit = &r8712_usb_inirp_deinit;
394 /* step 3.
395 * initialize the dvobj_priv
396 */
397 if (padapter->dvobj_init == NULL)
398 goto error;
399 else {
400 status = padapter->dvobj_init(padapter);
401 if (status != _SUCCESS)
402 goto error;
403 }
404 /* step 4. */
405 status = r8712_init_drv_sw(padapter);
406 if (status == _FAIL)
407 goto error;
408 /* step 5. read efuse/eeprom data and get mac_addr */
409 {
410 int i, offset;
411 u8 mac[6];
412 u8 tmpU1b, AutoloadFail, eeprom_CustomerID;
413 u8 *pdata = padapter->eeprompriv.efuse_eeprom_data;
414
415 tmpU1b = r8712_read8(padapter, EE_9346CR);/*CR9346*/
416
417 /* To check system boot selection.*/
418 printk(KERN_INFO "r8712u: Boot from %s: Autoload %s\n",
419 (tmpU1b & _9356SEL) ? "EEPROM" : "EFUSE",
420 (tmpU1b & _EEPROM_EN) ? "OK" : "Failed");
421
422 /* To check autoload success or not.*/
423 if (tmpU1b & _EEPROM_EN) {
424 AutoloadFail = true;
425 /* The following operations prevent Efuse leakage by
426 * turning on 2.5V.
427 */
428 tmpU1b = r8712_read8(padapter, EFUSE_TEST+3);
429 r8712_write8(padapter, EFUSE_TEST + 3, tmpU1b | 0x80);
430 msleep(20);
431 r8712_write8(padapter, EFUSE_TEST + 3,
432 (tmpU1b & (~BIT(7))));
433
434 /* Retrieve Chip version.
435 * Recognize IC version by Reg0x4 BIT15.
436 */
437 tmpU1b = (u8)((r8712_read32(padapter, PMC_FSM) >> 15) &
438 0x1F);
439 if (tmpU1b == 0x3)
440 padapter->registrypriv.chip_version =
441 RTL8712_3rdCUT;
442 else
443 padapter->registrypriv.chip_version =
444 (tmpU1b >> 1) + 1;
445 switch (padapter->registrypriv.chip_version) {
446 case RTL8712_1stCUT:
447 case RTL8712_2ndCUT:
448 case RTL8712_3rdCUT:
449 break;
450 default:
451 padapter->registrypriv.chip_version =
452 RTL8712_2ndCUT;
453 break;
454 }
455
456 for (i = 0, offset = 0; i < 128; i += 8, offset++)
457 r8712_efuse_pg_packet_read(padapter, offset,
458 &pdata[i]);
459
460 if (r8712_initmac) {
461 /* Users specify the mac address */
462 int jj, kk;
463
464 for (jj = 0, kk = 0; jj < ETH_ALEN;
465 jj++, kk += 3)
466 mac[jj] =
467 key_2char2num(r8712_initmac[kk],
468 r8712_initmac[kk + 1]);
469 } else {
470 /* Use the mac address stored in the Efuse
471 * offset = 0x12 for usb in efuse
472 */
473 memcpy(mac, &pdata[0x12], ETH_ALEN);
474 }
475 eeprom_CustomerID = pdata[0x52];
476 switch (eeprom_CustomerID) {
477 case EEPROM_CID_ALPHA:
478 padapter->eeprompriv.CustomerID =
479 RT_CID_819x_ALPHA;
480 break;
481 case EEPROM_CID_CAMEO:
482 padapter->eeprompriv.CustomerID =
483 RT_CID_819x_CAMEO;
484 break;
485 case EEPROM_CID_SITECOM:
486 padapter->eeprompriv.CustomerID =
487 RT_CID_819x_Sitecom;
488 break;
489 case EEPROM_CID_COREGA:
490 padapter->eeprompriv.CustomerID =
491 RT_CID_COREGA;
492 break;
493 case EEPROM_CID_Senao:
494 padapter->eeprompriv.CustomerID =
495 RT_CID_819x_Senao;
496 break;
497 case EEPROM_CID_EDIMAX_BELKIN:
498 padapter->eeprompriv.CustomerID =
499 RT_CID_819x_Edimax_Belkin;
500 break;
501 case EEPROM_CID_SERCOMM_BELKIN:
502 padapter->eeprompriv.CustomerID =
503 RT_CID_819x_Sercomm_Belkin;
504 break;
505 case EEPROM_CID_WNC_COREGA:
506 padapter->eeprompriv.CustomerID =
507 RT_CID_819x_WNC_COREGA;
508 break;
509 case EEPROM_CID_WHQL:
510 break;
511 case EEPROM_CID_NetCore:
512 padapter->eeprompriv.CustomerID =
513 RT_CID_819x_Netcore;
514 break;
515 case EEPROM_CID_CAMEO1:
516 padapter->eeprompriv.CustomerID =
517 RT_CID_819x_CAMEO1;
518 break;
519 case EEPROM_CID_CLEVO:
520 padapter->eeprompriv.CustomerID =
521 RT_CID_819x_CLEVO;
522 break;
523 default:
524 padapter->eeprompriv.CustomerID =
525 RT_CID_DEFAULT;
526 break;
527 }
528 printk(KERN_INFO "r8712u: CustomerID = 0x%.4x\n",
529 padapter->eeprompriv.CustomerID);
530 /* Led mode */
531 switch (padapter->eeprompriv.CustomerID) {
532 case RT_CID_DEFAULT:
533 case RT_CID_819x_ALPHA:
534 case RT_CID_819x_CAMEO:
535 padapter->ledpriv.LedStrategy = SW_LED_MODE1;
536 padapter->ledpriv.bRegUseLed = true;
537 break;
538 case RT_CID_819x_Sitecom:
539 padapter->ledpriv.LedStrategy = SW_LED_MODE2;
540 padapter->ledpriv.bRegUseLed = true;
541 break;
542 case RT_CID_COREGA:
543 case RT_CID_819x_Senao:
544 padapter->ledpriv.LedStrategy = SW_LED_MODE3;
545 padapter->ledpriv.bRegUseLed = true;
546 break;
547 case RT_CID_819x_Edimax_Belkin:
548 padapter->ledpriv.LedStrategy = SW_LED_MODE4;
549 padapter->ledpriv.bRegUseLed = true;
550 break;
551 case RT_CID_819x_Sercomm_Belkin:
552 padapter->ledpriv.LedStrategy = SW_LED_MODE5;
553 padapter->ledpriv.bRegUseLed = true;
554 break;
555 case RT_CID_819x_WNC_COREGA:
556 padapter->ledpriv.LedStrategy = SW_LED_MODE6;
557 padapter->ledpriv.bRegUseLed = true;
558 break;
559 default:
560 padapter->ledpriv.LedStrategy = SW_LED_MODE0;
561 padapter->ledpriv.bRegUseLed = false;
562 break;
563 }
564 } else
565 AutoloadFail = false;
566 if (((mac[0] == 0xff) && (mac[1] == 0xff) &&
567 (mac[2] == 0xff) && (mac[3] == 0xff) &&
568 (mac[4] == 0xff) && (mac[5] == 0xff)) ||
569 ((mac[0] == 0x00) && (mac[1] == 0x00) &&
570 (mac[2] == 0x00) && (mac[3] == 0x00) &&
571 (mac[4] == 0x00) && (mac[5] == 0x00)) ||
572 (AutoloadFail == false)) {
573 mac[0] = 0x00;
574 mac[1] = 0xe0;
575 mac[2] = 0x4c;
576 mac[3] = 0x87;
577 mac[4] = 0x00;
578 mac[5] = 0x00;
579 }
580 if (r8712_initmac) {
581 /* Make sure the user did not select a multicast
582 * address by setting bit 1 of first octet.
583 */
584 mac[0] &= 0xFE;
585 printk(KERN_INFO "r8712u: MAC Address from user = "
586 "%pM\n", mac);
587 } else
588 printk(KERN_INFO "r8712u: MAC Address from efuse = "
589 "%pM\n", mac);
590 memcpy(pnetdev->dev_addr, mac, ETH_ALEN);
591 }
592 /* step 6. Tell the network stack we exist */
593 if (register_netdev(pnetdev) != 0)
594 goto error;
595 return 0;
596 error:
597 usb_put_dev(interface_to_usbdev(pusb_intf));
598 usb_set_intfdata(pusb_intf, NULL);
599 if (padapter->dvobj_deinit != NULL)
600 padapter->dvobj_deinit(padapter);
601 if (pnetdev)
602 os_free_netdev(pnetdev);
603 return -ENODEV;
604 }
605
606 /* rmmod module & unplug(SurpriseRemoved) will call r871xu_dev_remove()
607 * => how to recognize both */
r871xu_dev_remove(struct usb_interface * pusb_intf)608 static void r871xu_dev_remove(struct usb_interface *pusb_intf)
609 {
610 struct net_device *pnetdev = usb_get_intfdata(pusb_intf);
611 struct _adapter *padapter = netdev_priv(pnetdev);
612 struct usb_device *udev = interface_to_usbdev(pusb_intf);
613
614 if (padapter) {
615 if (drvpriv.drv_registered == true)
616 padapter->bSurpriseRemoved = true;
617 if (pnetdev != NULL) {
618 /* will call netdev_close() */
619 unregister_netdev(pnetdev);
620 }
621 flush_scheduled_work();
622 udelay(1);
623 r871x_dev_unload(padapter);
624 r8712_free_drv_sw(padapter);
625 }
626 usb_set_intfdata(pusb_intf, NULL);
627 /* decrease the reference count of the usb device structure
628 * when disconnect */
629 usb_put_dev(udev);
630 /* If we didn't unplug usb dongle and remove/insert modlue, driver
631 * fails on sitesurvey for the first time when device is up.
632 * Reset usb port for sitesurvey fail issue. */
633 if (udev->state != USB_STATE_NOTATTACHED)
634 usb_reset_device(udev);
635 return;
636 }
637
r8712u_drv_entry(void)638 static int __init r8712u_drv_entry(void)
639 {
640 drvpriv.drv_registered = true;
641 return usb_register(&drvpriv.r871xu_drv);
642 }
643
r8712u_drv_halt(void)644 static void __exit r8712u_drv_halt(void)
645 {
646 drvpriv.drv_registered = false;
647 usb_deregister(&drvpriv.r871xu_drv);
648 printk(KERN_INFO "r8712u: Driver unloaded\n");
649 }
650
651 module_init(r8712u_drv_entry);
652 module_exit(r8712u_drv_halt);
653