1 /* bnx2x_init.h: Broadcom Everest network driver.
2 * Structures and macroes needed during the initialization.
3 *
4 * Copyright (c) 2007-2009 Broadcom Corporation
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation.
9 *
10 * Maintained by: Eilon Greenstein <eilong@broadcom.com>
11 * Written by: Eliezer Tamir
12 * Modified by: Vladislav Zolotarov <vladz@broadcom.com>
13 */
14
15 #ifndef BNX2X_INIT_H
16 #define BNX2X_INIT_H
17
18 /* RAM0 size in bytes */
19 #define STORM_INTMEM_SIZE_E1 0x5800
20 #define STORM_INTMEM_SIZE_E1H 0x10000
21 #define STORM_INTMEM_SIZE(bp) ((CHIP_IS_E1(bp) ? STORM_INTMEM_SIZE_E1 : \
22 STORM_INTMEM_SIZE_E1H) / 4)
23
24
25 /* Init operation types and structures */
26 /* Common for both E1 and E1H */
27 #define OP_RD 0x1 /* read single register */
28 #define OP_WR 0x2 /* write single register */
29 #define OP_IW 0x3 /* write single register using mailbox */
30 #define OP_SW 0x4 /* copy a string to the device */
31 #define OP_SI 0x5 /* copy a string using mailbox */
32 #define OP_ZR 0x6 /* clear memory */
33 #define OP_ZP 0x7 /* unzip then copy with DMAE */
34 #define OP_WR_64 0x8 /* write 64 bit pattern */
35 #define OP_WB 0x9 /* copy a string using DMAE */
36
37 /* FPGA and EMUL specific operations */
38 #define OP_WR_EMUL 0xa /* write single register on Emulation */
39 #define OP_WR_FPGA 0xb /* write single register on FPGA */
40 #define OP_WR_ASIC 0xc /* write single register on ASIC */
41
42 /* Init stages */
43 /* Never reorder stages !!! */
44 #define COMMON_STAGE 0
45 #define PORT0_STAGE 1
46 #define PORT1_STAGE 2
47 #define FUNC0_STAGE 3
48 #define FUNC1_STAGE 4
49 #define FUNC2_STAGE 5
50 #define FUNC3_STAGE 6
51 #define FUNC4_STAGE 7
52 #define FUNC5_STAGE 8
53 #define FUNC6_STAGE 9
54 #define FUNC7_STAGE 10
55 #define STAGE_IDX_MAX 11
56
57 #define STAGE_START 0
58 #define STAGE_END 1
59
60
61 /* Indices of blocks */
62 #define PRS_BLOCK 0
63 #define SRCH_BLOCK 1
64 #define TSDM_BLOCK 2
65 #define TCM_BLOCK 3
66 #define BRB1_BLOCK 4
67 #define TSEM_BLOCK 5
68 #define PXPCS_BLOCK 6
69 #define EMAC0_BLOCK 7
70 #define EMAC1_BLOCK 8
71 #define DBU_BLOCK 9
72 #define MISC_BLOCK 10
73 #define DBG_BLOCK 11
74 #define NIG_BLOCK 12
75 #define MCP_BLOCK 13
76 #define UPB_BLOCK 14
77 #define CSDM_BLOCK 15
78 #define USDM_BLOCK 16
79 #define CCM_BLOCK 17
80 #define UCM_BLOCK 18
81 #define USEM_BLOCK 19
82 #define CSEM_BLOCK 20
83 #define XPB_BLOCK 21
84 #define DQ_BLOCK 22
85 #define TIMERS_BLOCK 23
86 #define XSDM_BLOCK 24
87 #define QM_BLOCK 25
88 #define PBF_BLOCK 26
89 #define XCM_BLOCK 27
90 #define XSEM_BLOCK 28
91 #define CDU_BLOCK 29
92 #define DMAE_BLOCK 30
93 #define PXP_BLOCK 31
94 #define CFC_BLOCK 32
95 #define HC_BLOCK 33
96 #define PXP2_BLOCK 34
97 #define MISC_AEU_BLOCK 35
98 #define PGLUE_B_BLOCK 36
99 #define IGU_BLOCK 37
100 #define ATC_BLOCK 38
101 #define QM_4PORT_BLOCK 39
102 #define XSEM_4PORT_BLOCK 40
103
104
105 /* Returns the index of start or end of a specific block stage in ops array*/
106 #define BLOCK_OPS_IDX(block, stage, end) \
107 (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))
108
109
110 struct raw_op {
111 u32 op:8;
112 u32 offset:24;
113 u32 raw_data;
114 };
115
116 struct op_read {
117 u32 op:8;
118 u32 offset:24;
119 u32 pad;
120 };
121
122 struct op_write {
123 u32 op:8;
124 u32 offset:24;
125 u32 val;
126 };
127
128 struct op_string_write {
129 u32 op:8;
130 u32 offset:24;
131 #ifdef __LITTLE_ENDIAN
132 u16 data_off;
133 u16 data_len;
134 #else /* __BIG_ENDIAN */
135 u16 data_len;
136 u16 data_off;
137 #endif
138 };
139
140 struct op_zero {
141 u32 op:8;
142 u32 offset:24;
143 u32 len;
144 };
145
146 union init_op {
147 struct op_read read;
148 struct op_write write;
149 struct op_string_write str_wr;
150 struct op_zero zero;
151 struct raw_op raw;
152 };
153
154 #define INITOP_SET 0 /* set the HW directly */
155 #define INITOP_CLEAR 1 /* clear the HW directly */
156 #define INITOP_INIT 2 /* set the init-value array */
157
158 /****************************************************************************
159 * ILT management
160 ****************************************************************************/
161 struct ilt_line {
162 dma_addr_t page_mapping;
163 void *page;
164 u32 size;
165 };
166
167 struct ilt_client_info {
168 u32 page_size;
169 u16 start;
170 u16 end;
171 u16 client_num;
172 u16 flags;
173 #define ILT_CLIENT_SKIP_INIT 0x1
174 #define ILT_CLIENT_SKIP_MEM 0x2
175 };
176
177 struct bnx2x_ilt {
178 u32 start_line;
179 struct ilt_line *lines;
180 struct ilt_client_info clients[4];
181 #define ILT_CLIENT_CDU 0
182 #define ILT_CLIENT_QM 1
183 #define ILT_CLIENT_SRC 2
184 #define ILT_CLIENT_TM 3
185 };
186
187 /****************************************************************************
188 * SRC configuration
189 ****************************************************************************/
190 struct src_ent {
191 u8 opaque[56];
192 u64 next;
193 };
194
195 /****************************************************************************
196 * Parity configuration
197 ****************************************************************************/
198 #define BLOCK_PRTY_INFO(block, en_mask, m1, m1h, m2) \
199 { \
200 block##_REG_##block##_PRTY_MASK, \
201 block##_REG_##block##_PRTY_STS_CLR, \
202 en_mask, {m1, m1h, m2}, #block \
203 }
204
205 #define BLOCK_PRTY_INFO_0(block, en_mask, m1, m1h, m2) \
206 { \
207 block##_REG_##block##_PRTY_MASK_0, \
208 block##_REG_##block##_PRTY_STS_CLR_0, \
209 en_mask, {m1, m1h, m2}, #block"_0" \
210 }
211
212 #define BLOCK_PRTY_INFO_1(block, en_mask, m1, m1h, m2) \
213 { \
214 block##_REG_##block##_PRTY_MASK_1, \
215 block##_REG_##block##_PRTY_STS_CLR_1, \
216 en_mask, {m1, m1h, m2}, #block"_1" \
217 }
218
219 static const struct {
220 u32 mask_addr;
221 u32 sts_clr_addr;
222 u32 en_mask; /* Mask to enable parity attentions */
223 struct {
224 u32 e1; /* 57710 */
225 u32 e1h; /* 57711 */
226 u32 e2; /* 57712 */
227 } reg_mask; /* Register mask (all valid bits) */
228 char name[7]; /* Block's longest name is 6 characters long
229 * (name + suffix)
230 */
231 } bnx2x_blocks_parity_data[] = {
232 /* bit 19 masked */
233 /* REG_WR(bp, PXP_REG_PXP_PRTY_MASK, 0x80000); */
234 /* bit 5,18,20-31 */
235 /* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_0, 0xfff40020); */
236 /* bit 5 */
237 /* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_1, 0x20); */
238 /* REG_WR(bp, HC_REG_HC_PRTY_MASK, 0x0); */
239 /* REG_WR(bp, MISC_REG_MISC_PRTY_MASK, 0x0); */
240
241 /* Block IGU, MISC, PXP and PXP2 parity errors as long as we don't
242 * want to handle "system kill" flow at the moment.
243 */
244 BLOCK_PRTY_INFO(PXP, 0x7ffffff, 0x3ffffff, 0x3ffffff, 0x7ffffff),
245 BLOCK_PRTY_INFO_0(PXP2, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff),
246 BLOCK_PRTY_INFO_1(PXP2, 0x7ff, 0x7f, 0x7f, 0x7ff),
247 BLOCK_PRTY_INFO(HC, 0x7, 0x7, 0x7, 0),
248 BLOCK_PRTY_INFO(IGU, 0x7ff, 0, 0, 0x7ff),
249 BLOCK_PRTY_INFO(MISC, 0x1, 0x1, 0x1, 0x1),
250 BLOCK_PRTY_INFO(QM, 0, 0x1ff, 0xfff, 0xfff),
251 BLOCK_PRTY_INFO(DORQ, 0, 0x3, 0x3, 0x3),
252 {GRCBASE_UPB + PB_REG_PB_PRTY_MASK,
253 GRCBASE_UPB + PB_REG_PB_PRTY_STS_CLR, 0,
254 {0xf, 0xf, 0xf}, "UPB"},
255 {GRCBASE_XPB + PB_REG_PB_PRTY_MASK,
256 GRCBASE_XPB + PB_REG_PB_PRTY_STS_CLR, 0,
257 {0xf, 0xf, 0xf}, "XPB"},
258 BLOCK_PRTY_INFO(SRC, 0x4, 0x7, 0x7, 0x7),
259 BLOCK_PRTY_INFO(CDU, 0, 0x1f, 0x1f, 0x1f),
260 BLOCK_PRTY_INFO(CFC, 0, 0xf, 0xf, 0xf),
261 BLOCK_PRTY_INFO(DBG, 0, 0x1, 0x1, 0x1),
262 BLOCK_PRTY_INFO(DMAE, 0, 0xf, 0xf, 0xf),
263 BLOCK_PRTY_INFO(BRB1, 0, 0xf, 0xf, 0xf),
264 BLOCK_PRTY_INFO(PRS, (1<<6), 0xff, 0xff, 0xff),
265 BLOCK_PRTY_INFO(TSDM, 0x18, 0x7ff, 0x7ff, 0x7ff),
266 BLOCK_PRTY_INFO(CSDM, 0x8, 0x7ff, 0x7ff, 0x7ff),
267 BLOCK_PRTY_INFO(USDM, 0x38, 0x7ff, 0x7ff, 0x7ff),
268 BLOCK_PRTY_INFO(XSDM, 0x8, 0x7ff, 0x7ff, 0x7ff),
269 BLOCK_PRTY_INFO_0(TSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
270 BLOCK_PRTY_INFO_1(TSEM, 0, 0x3, 0x1f, 0x3f),
271 BLOCK_PRTY_INFO_0(USEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
272 BLOCK_PRTY_INFO_1(USEM, 0, 0x3, 0x1f, 0x1f),
273 BLOCK_PRTY_INFO_0(CSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
274 BLOCK_PRTY_INFO_1(CSEM, 0, 0x3, 0x1f, 0x1f),
275 BLOCK_PRTY_INFO_0(XSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
276 BLOCK_PRTY_INFO_1(XSEM, 0, 0x3, 0x1f, 0x3f),
277 };
278
279
280 /* [28] MCP Latched rom_parity
281 * [29] MCP Latched ump_rx_parity
282 * [30] MCP Latched ump_tx_parity
283 * [31] MCP Latched scpad_parity
284 */
285 #define MISC_AEU_ENABLE_MCP_PRTY_BITS \
286 (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
287 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
288 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \
289 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
290
291 /* Below registers control the MCP parity attention output. When
292 * MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are
293 * enabled, when cleared - disabled.
294 */
295 static const u32 mcp_attn_ctl_regs[] = {
296 MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0,
297 MISC_REG_AEU_ENABLE4_NIG_0,
298 MISC_REG_AEU_ENABLE4_PXP_0,
299 MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0,
300 MISC_REG_AEU_ENABLE4_NIG_1,
301 MISC_REG_AEU_ENABLE4_PXP_1
302 };
303
bnx2x_set_mcp_parity(struct bnx2x * bp,u8 enable)304 static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable)
305 {
306 int i;
307 u32 reg_val;
308
309 for (i = 0; i < ARRAY_SIZE(mcp_attn_ctl_regs); i++) {
310 reg_val = REG_RD(bp, mcp_attn_ctl_regs[i]);
311
312 if (enable)
313 reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS;
314 else
315 reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS;
316
317 REG_WR(bp, mcp_attn_ctl_regs[i], reg_val);
318 }
319 }
320
bnx2x_parity_reg_mask(struct bnx2x * bp,int idx)321 static inline u32 bnx2x_parity_reg_mask(struct bnx2x *bp, int idx)
322 {
323 if (CHIP_IS_E1(bp))
324 return bnx2x_blocks_parity_data[idx].reg_mask.e1;
325 else if (CHIP_IS_E1H(bp))
326 return bnx2x_blocks_parity_data[idx].reg_mask.e1h;
327 else
328 return bnx2x_blocks_parity_data[idx].reg_mask.e2;
329 }
330
bnx2x_disable_blocks_parity(struct bnx2x * bp)331 static inline void bnx2x_disable_blocks_parity(struct bnx2x *bp)
332 {
333 int i;
334
335 for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
336 u32 dis_mask = bnx2x_parity_reg_mask(bp, i);
337
338 if (dis_mask) {
339 REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr,
340 dis_mask);
341 DP(NETIF_MSG_HW, "Setting parity mask "
342 "for %s to\t\t0x%x\n",
343 bnx2x_blocks_parity_data[i].name, dis_mask);
344 }
345 }
346
347 /* Disable MCP parity attentions */
348 bnx2x_set_mcp_parity(bp, false);
349 }
350
351 /**
352 * Clear the parity error status registers.
353 */
bnx2x_clear_blocks_parity(struct bnx2x * bp)354 static inline void bnx2x_clear_blocks_parity(struct bnx2x *bp)
355 {
356 int i;
357 u32 reg_val, mcp_aeu_bits =
358 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY |
359 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY |
360 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY |
361 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY;
362
363 /* Clear SEM_FAST parities */
364 REG_WR(bp, XSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
365 REG_WR(bp, TSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
366 REG_WR(bp, USEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
367 REG_WR(bp, CSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
368
369 for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
370 u32 reg_mask = bnx2x_parity_reg_mask(bp, i);
371
372 if (reg_mask) {
373 reg_val = REG_RD(bp, bnx2x_blocks_parity_data[i].
374 sts_clr_addr);
375 if (reg_val & reg_mask)
376 DP(NETIF_MSG_HW,
377 "Parity errors in %s: 0x%x\n",
378 bnx2x_blocks_parity_data[i].name,
379 reg_val & reg_mask);
380 }
381 }
382
383 /* Check if there were parity attentions in MCP */
384 reg_val = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_MCP);
385 if (reg_val & mcp_aeu_bits)
386 DP(NETIF_MSG_HW, "Parity error in MCP: 0x%x\n",
387 reg_val & mcp_aeu_bits);
388
389 /* Clear parity attentions in MCP:
390 * [7] clears Latched rom_parity
391 * [8] clears Latched ump_rx_parity
392 * [9] clears Latched ump_tx_parity
393 * [10] clears Latched scpad_parity (both ports)
394 */
395 REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x780);
396 }
397
bnx2x_enable_blocks_parity(struct bnx2x * bp)398 static inline void bnx2x_enable_blocks_parity(struct bnx2x *bp)
399 {
400 int i;
401
402 for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
403 u32 reg_mask = bnx2x_parity_reg_mask(bp, i);
404
405 if (reg_mask)
406 REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr,
407 bnx2x_blocks_parity_data[i].en_mask & reg_mask);
408 }
409
410 /* Enable MCP parity attentions */
411 bnx2x_set_mcp_parity(bp, true);
412 }
413
414
415 #endif /* BNX2X_INIT_H */
416
417