1 /*
2 * xHCI host controller driver
3 *
4 * Copyright (C) 2008 Intel Corp.
5 *
6 * Author: Sarah Sharp
7 * Some code borrowed from the Linux EHCI driver.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
16 * for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software Foundation,
20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22 /* Up to 16 ms to halt an HC */
23 #define XHCI_MAX_HALT_USEC (16*1000)
24 /* HC not running - set to 1 when run/stop bit is cleared. */
25 #define XHCI_STS_HALT (1<<0)
26
27 /* HCCPARAMS offset from PCI base address */
28 #define XHCI_HCC_PARAMS_OFFSET 0x10
29 /* HCCPARAMS contains the first extended capability pointer */
30 #define XHCI_HCC_EXT_CAPS(p) (((p)>>16)&0xffff)
31
32 /* Command and Status registers offset from the Operational Registers address */
33 #define XHCI_CMD_OFFSET 0x00
34 #define XHCI_STS_OFFSET 0x04
35
36 #define XHCI_MAX_EXT_CAPS 50
37
38 /* Capability Register */
39 /* bits 7:0 - how long is the Capabilities register */
40 #define XHCI_HC_LENGTH(p) (((p)>>00)&0x00ff)
41
42 /* Extended capability register fields */
43 #define XHCI_EXT_CAPS_ID(p) (((p)>>0)&0xff)
44 #define XHCI_EXT_CAPS_NEXT(p) (((p)>>8)&0xff)
45 #define XHCI_EXT_CAPS_VAL(p) ((p)>>16)
46 /* Extended capability IDs - ID 0 reserved */
47 #define XHCI_EXT_CAPS_LEGACY 1
48 #define XHCI_EXT_CAPS_PROTOCOL 2
49 #define XHCI_EXT_CAPS_PM 3
50 #define XHCI_EXT_CAPS_VIRT 4
51 #define XHCI_EXT_CAPS_ROUTE 5
52 /* IDs 6-9 reserved */
53 #define XHCI_EXT_CAPS_DEBUG 10
54 /* USB Legacy Support Capability - section 7.1.1 */
55 #define XHCI_HC_BIOS_OWNED (1 << 16)
56 #define XHCI_HC_OS_OWNED (1 << 24)
57
58 /* USB Legacy Support Capability - section 7.1.1 */
59 /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
60 #define XHCI_LEGACY_SUPPORT_OFFSET (0x00)
61
62 /* USB Legacy Support Control and Status Register - section 7.1.2 */
63 /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
64 #define XHCI_LEGACY_CONTROL_OFFSET (0x04)
65 /* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
66 #define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17))
67 #define XHCI_LEGACY_SMI_EVENTS (0x7 << 29)
68
69 /* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
70 #define XHCI_L1C (1 << 16)
71
72 /* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */
73 #define XHCI_HLC (1 << 19)
74
75 /* command register values to disable interrupts and halt the HC */
76 /* start/stop HC execution - do not write unless HC is halted*/
77 #define XHCI_CMD_RUN (1 << 0)
78 /* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */
79 #define XHCI_CMD_EIE (1 << 2)
80 /* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */
81 #define XHCI_CMD_HSEIE (1 << 3)
82 /* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
83 #define XHCI_CMD_EWE (1 << 10)
84
85 #define XHCI_IRQS (XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE)
86
87 /* true: Controller Not Ready to accept doorbell or op reg writes after reset */
88 #define XHCI_STS_CNR (1 << 11)
89
90 #include <linux/io.h>
91
92 /**
93 * Return the next extended capability pointer register.
94 *
95 * @base PCI register base address.
96 *
97 * @ext_offset Offset of the 32-bit register that contains the extended
98 * capabilites pointer. If searching for the first extended capability, pass
99 * in XHCI_HCC_PARAMS_OFFSET. If searching for the next extended capability,
100 * pass in the offset of the current extended capability register.
101 *
102 * Returns 0 if there is no next extended capability register or returns the register offset
103 * from the PCI registers base address.
104 */
xhci_find_next_cap_offset(void __iomem * base,int ext_offset)105 static inline int xhci_find_next_cap_offset(void __iomem *base, int ext_offset)
106 {
107 u32 next;
108
109 next = readl(base + ext_offset);
110
111 if (ext_offset == XHCI_HCC_PARAMS_OFFSET) {
112 /* Find the first extended capability */
113 next = XHCI_HCC_EXT_CAPS(next);
114 ext_offset = 0;
115 } else {
116 /* Find the next extended capability */
117 next = XHCI_EXT_CAPS_NEXT(next);
118 }
119
120 if (!next)
121 return 0;
122 /*
123 * Address calculation from offset of extended capabilities
124 * (or HCCPARAMS) register - see section 5.3.6 and section 7.
125 */
126 return ext_offset + (next << 2);
127 }
128
129 /**
130 * Find the offset of the extended capabilities with capability ID id.
131 *
132 * @base PCI MMIO registers base address.
133 * @ext_offset Offset from base of the first extended capability to look at,
134 * or the address of HCCPARAMS.
135 * @id Extended capability ID to search for.
136 *
137 * This uses an arbitrary limit of XHCI_MAX_EXT_CAPS extended capabilities
138 * to make sure that the list doesn't contain a loop.
139 */
xhci_find_ext_cap_by_id(void __iomem * base,int ext_offset,int id)140 static inline int xhci_find_ext_cap_by_id(void __iomem *base, int ext_offset, int id)
141 {
142 u32 val;
143 int limit = XHCI_MAX_EXT_CAPS;
144
145 while (ext_offset && limit > 0) {
146 val = readl(base + ext_offset);
147 if (XHCI_EXT_CAPS_ID(val) == id)
148 break;
149 ext_offset = xhci_find_next_cap_offset(base, ext_offset);
150 limit--;
151 }
152 if (limit > 0)
153 return ext_offset;
154 return 0;
155 }
156