1 /***************************************************************************** 2 * wanrouter.h Definitions for the WAN Multiprotocol Router Module. 3 * This module provides API and common services for WAN Link 4 * Drivers and is completely hardware-independent. 5 * 6 * Author: Nenad Corbic <ncorbic@sangoma.com> 7 * Gideon Hack 8 * Additions: Arnaldo Melo 9 * 10 * Copyright: (c) 1995-2000 Sangoma Technologies Inc. 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License 14 * as published by the Free Software Foundation; either version 15 * 2 of the License, or (at your option) any later version. 16 * ============================================================================ 17 * Jul 21, 2000 Nenad Corbic Added WAN_FT1_READY State 18 * Feb 24, 2000 Nenad Corbic Added support for socket based x25api 19 * Jan 28, 2000 Nenad Corbic Added support for the ASYNC protocol. 20 * Oct 04, 1999 Nenad Corbic Updated for 2.1.0 release 21 * Jun 02, 1999 Gideon Hack Added support for the S514 adapter. 22 * May 23, 1999 Arnaldo Melo Added local_addr to wanif_conf_t 23 * WAN_DISCONNECTING state added 24 * Jul 20, 1998 David Fong Added Inverse ARP options to 'wanif_conf_t' 25 * Jun 12, 1998 David Fong Added Cisco HDLC support. 26 * Dec 16, 1997 Jaspreet Singh Moved 'enable_IPX' and 'network_number' to 27 * 'wanif_conf_t' 28 * Dec 05, 1997 Jaspreet Singh Added 'pap', 'chap' to 'wanif_conf_t' 29 * Added 'authenticator' to 'wan_ppp_conf_t' 30 * Nov 06, 1997 Jaspreet Singh Changed Router Driver version to 1.1 from 1.0 31 * Oct 20, 1997 Jaspreet Singh Added 'cir','bc','be' and 'mc' to 'wanif_conf_t' 32 * Added 'enable_IPX' and 'network_number' to 33 * 'wan_device_t'. Also added defines for 34 * UDP PACKET TYPE, Interrupt test, critical values 35 * for RACE conditions. 36 * Oct 05, 1997 Jaspreet Singh Added 'dlci_num' and 'dlci[100]' to 37 * 'wan_fr_conf_t' to configure a list of dlci(s) 38 * for a NODE 39 * Jul 07, 1997 Jaspreet Singh Added 'ttl' to 'wandev_conf_t' & 'wan_device_t' 40 * May 29, 1997 Jaspreet Singh Added 'tx_int_enabled' to 'wan_device_t' 41 * May 21, 1997 Jaspreet Singh Added 'udp_port' to 'wan_device_t' 42 * Apr 25, 1997 Farhan Thawar Added 'udp_port' to 'wandev_conf_t' 43 * Jan 16, 1997 Gene Kozin router_devlist made public 44 * Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h). 45 *****************************************************************************/ 46 47 #ifndef _ROUTER_H 48 #define _ROUTER_H 49 50 #define ROUTER_NAME "wanrouter" /* in case we ever change it */ 51 #define ROUTER_VERSION 1 /* version number */ 52 #define ROUTER_RELEASE 1 /* release (minor version) number */ 53 #define ROUTER_IOCTL 'W' /* for IOCTL calls */ 54 #define ROUTER_MAGIC 0x524D4157L /* signature: 'WANR' reversed */ 55 56 /* IOCTL codes for /proc/router/<device> entries (up to 255) */ 57 enum router_ioctls 58 { 59 ROUTER_SETUP = ROUTER_IOCTL<<8, /* configure device */ 60 ROUTER_DOWN, /* shut down device */ 61 ROUTER_STAT, /* get device status */ 62 ROUTER_IFNEW, /* add interface */ 63 ROUTER_IFDEL, /* delete interface */ 64 ROUTER_IFSTAT, /* get interface status */ 65 ROUTER_USER = (ROUTER_IOCTL<<8)+16, /* driver-specific calls */ 66 ROUTER_USER_MAX = (ROUTER_IOCTL<<8)+31 67 }; 68 69 /* identifiers for displaying proc file data for dual port adapters */ 70 #define PROC_DATA_PORT_0 0x8000 /* the data is for port 0 */ 71 #define PROC_DATA_PORT_1 0x8001 /* the data is for port 1 */ 72 73 /* NLPID for packet encapsulation (ISO/IEC TR 9577) */ 74 #define NLPID_IP 0xCC /* Internet Protocol Datagram */ 75 #define NLPID_SNAP 0x80 /* IEEE Subnetwork Access Protocol */ 76 #define NLPID_CLNP 0x81 /* ISO/IEC 8473 */ 77 #define NLPID_ESIS 0x82 /* ISO/IEC 9542 */ 78 #define NLPID_ISIS 0x83 /* ISO/IEC ISIS */ 79 #define NLPID_Q933 0x08 /* CCITT Q.933 */ 80 81 /* Miscellaneous */ 82 #define WAN_IFNAME_SZ 15 /* max length of the interface name */ 83 #define WAN_DRVNAME_SZ 15 /* max length of the link driver name */ 84 #define WAN_ADDRESS_SZ 31 /* max length of the WAN media address */ 85 #define USED_BY_FIELD 8 /* max length of the used by field */ 86 87 /* Defines for UDP PACKET TYPE */ 88 #define UDP_PTPIPE_TYPE 0x01 89 #define UDP_FPIPE_TYPE 0x02 90 #define UDP_CPIPE_TYPE 0x03 91 #define UDP_DRVSTATS_TYPE 0x04 92 #define UDP_INVALID_TYPE 0x05 93 94 /* Command return code */ 95 #define CMD_OK 0 /* normal firmware return code */ 96 #define CMD_TIMEOUT 0xFF /* firmware command timed out */ 97 98 /* UDP Packet Management */ 99 #define UDP_PKT_FRM_STACK 0x00 100 #define UDP_PKT_FRM_NETWORK 0x01 101 102 /* Maximum interrupt test counter */ 103 #define MAX_INTR_TEST_COUNTER 100 104 105 /* Critical Values for RACE conditions*/ 106 #define CRITICAL_IN_ISR 0xA1 107 #define CRITICAL_INTR_HANDLED 0xB1 108 109 /****** Data Types **********************************************************/ 110 111 /*---------------------------------------------------------------------------- 112 * X.25-specific link-level configuration. 113 */ 114 typedef struct wan_x25_conf 115 { 116 unsigned lo_pvc; /* lowest permanent circuit number */ 117 unsigned hi_pvc; /* highest permanent circuit number */ 118 unsigned lo_svc; /* lowest switched circuit number */ 119 unsigned hi_svc; /* highest switched circuit number */ 120 unsigned hdlc_window; /* HDLC window size (1..7) */ 121 unsigned pkt_window; /* X.25 packet window size (1..7) */ 122 unsigned t1; /* HDLC timer T1, sec (1..30) */ 123 unsigned t2; /* HDLC timer T2, sec (0..29) */ 124 unsigned t4; /* HDLC supervisory frame timer = T4 * T1 */ 125 unsigned n2; /* HDLC retransmission limit (1..30) */ 126 unsigned t10_t20; /* X.25 RESTART timeout, sec (1..255) */ 127 unsigned t11_t21; /* X.25 CALL timeout, sec (1..255) */ 128 unsigned t12_t22; /* X.25 RESET timeout, sec (1..255) */ 129 unsigned t13_t23; /* X.25 CLEAR timeout, sec (1..255) */ 130 unsigned t16_t26; /* X.25 INTERRUPT timeout, sec (1..255) */ 131 unsigned t28; /* X.25 REGISTRATION timeout, sec (1..255) */ 132 unsigned r10_r20; /* RESTART retransmission limit (0..250) */ 133 unsigned r12_r22; /* RESET retransmission limit (0..250) */ 134 unsigned r13_r23; /* CLEAR retransmission limit (0..250) */ 135 unsigned ccitt_compat; /* compatibility mode: 1988/1984/1980 */ 136 unsigned x25_conf_opt; /* User defined x25 config optoins */ 137 unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */ 138 unsigned char logging; /* Control connection logging */ 139 unsigned char oob_on_modem; /* Whether to send modem status to the user app */ 140 } wan_x25_conf_t; 141 142 /*---------------------------------------------------------------------------- 143 * Frame relay specific link-level configuration. 144 */ 145 typedef struct wan_fr_conf 146 { 147 unsigned signalling; /* local in-channel signalling type */ 148 unsigned t391; /* link integrity verification timer */ 149 unsigned t392; /* polling verification timer */ 150 unsigned n391; /* full status polling cycle counter */ 151 unsigned n392; /* error threshold counter */ 152 unsigned n393; /* monitored events counter */ 153 unsigned dlci_num; /* number of DLCs (access node) */ 154 unsigned dlci[100]; /* List of all DLCIs */ 155 } wan_fr_conf_t; 156 157 /*---------------------------------------------------------------------------- 158 * PPP-specific link-level configuration. 159 */ 160 typedef struct wan_ppp_conf 161 { 162 unsigned restart_tmr; /* restart timer */ 163 unsigned auth_rsrt_tmr; /* authentication timer */ 164 unsigned auth_wait_tmr; /* authentication timer */ 165 unsigned mdm_fail_tmr; /* modem failure timer */ 166 unsigned dtr_drop_tmr; /* DTR drop timer */ 167 unsigned connect_tmout; /* connection timeout */ 168 unsigned conf_retry; /* max. retry */ 169 unsigned term_retry; /* max. retry */ 170 unsigned fail_retry; /* max. retry */ 171 unsigned auth_retry; /* max. retry */ 172 unsigned auth_options; /* authentication opt. */ 173 unsigned ip_options; /* IP options */ 174 char authenticator; /* AUTHENTICATOR or not */ 175 char ip_mode; /* Static/Host/Peer */ 176 } wan_ppp_conf_t; 177 178 /*---------------------------------------------------------------------------- 179 * CHDLC-specific link-level configuration. 180 */ 181 typedef struct wan_chdlc_conf 182 { 183 unsigned char ignore_dcd; /* Protocol options: */ 184 unsigned char ignore_cts; /* Ignore these to determine */ 185 unsigned char ignore_keepalive; /* link status (Yes or No) */ 186 unsigned char hdlc_streaming; /* hdlc_streaming mode (Y/N) */ 187 unsigned char receive_only; /* no transmit buffering (Y/N) */ 188 unsigned keepalive_tx_tmr; /* transmit keepalive timer */ 189 unsigned keepalive_rx_tmr; /* receive keepalive timer */ 190 unsigned keepalive_err_margin; /* keepalive_error_tolerance */ 191 unsigned slarp_timer; /* SLARP request timer */ 192 } wan_chdlc_conf_t; 193 194 195 /*---------------------------------------------------------------------------- 196 * WAN device configuration. Passed to ROUTER_SETUP IOCTL. 197 */ 198 typedef struct wandev_conf 199 { 200 unsigned magic; /* magic number (for verification) */ 201 unsigned config_id; /* configuration structure identifier */ 202 /****** hardware configuration ******/ 203 unsigned ioport; /* adapter I/O port base */ 204 unsigned long maddr; /* dual-port memory address */ 205 unsigned msize; /* dual-port memory size */ 206 int irq; /* interrupt request level */ 207 int dma; /* DMA request level */ 208 char S514_CPU_no[1]; /* S514 PCI adapter CPU number ('A' or 'B') */ 209 unsigned PCI_slot_no; /* S514 PCI adapter slot number */ 210 char auto_pci_cfg; /* S515 PCI automatic slot detection */ 211 char comm_port; /* Communication Port (PRI=0, SEC=1) */ 212 unsigned bps; /* data transfer rate */ 213 unsigned mtu; /* maximum transmit unit size */ 214 unsigned udp_port; /* UDP port for management */ 215 unsigned char ttl; /* Time To Live for UDP security */ 216 unsigned char ft1; /* FT1 Configurator Option */ 217 char interface; /* RS-232/V.35, etc. */ 218 char clocking; /* external/internal */ 219 char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */ 220 char station; /* DTE/DCE, primary/secondary, etc. */ 221 char connection; /* permanent/switched/on-demand */ 222 char read_mode; /* read mode: Polling or interrupt */ 223 char receive_only; /* disable tx buffers */ 224 char tty; /* Create a fake tty device */ 225 unsigned tty_major; /* Major number for wanpipe tty device */ 226 unsigned tty_minor; /* Minor number for wanpipe tty device */ 227 unsigned tty_mode; /* TTY operation mode SYNC or ASYNC */ 228 char backup; /* Backup Mode */ 229 unsigned hw_opt[4]; /* other hardware options */ 230 unsigned reserved[4]; 231 /****** arbitrary data ***************/ 232 unsigned data_size; /* data buffer size */ 233 void* data; /* data buffer, e.g. firmware */ 234 union /****** protocol-specific ************/ 235 { 236 wan_x25_conf_t x25; /* X.25 configuration */ 237 wan_ppp_conf_t ppp; /* PPP configuration */ 238 wan_fr_conf_t fr; /* frame relay configuration */ 239 wan_chdlc_conf_t chdlc; /* Cisco HDLC configuration */ 240 } u; 241 } wandev_conf_t; 242 243 /* 'config_id' definitions */ 244 #define WANCONFIG_X25 101 /* X.25 link */ 245 #define WANCONFIG_FR 102 /* frame relay link */ 246 #define WANCONFIG_PPP 103 /* synchronous PPP link */ 247 #define WANCONFIG_CHDLC 104 /* Cisco HDLC Link */ 248 #define WANCONFIG_BSC 105 /* BiSync Streaming */ 249 #define WANCONFIG_HDLC 106 /* HDLC Support */ 250 #define WANCONFIG_MPPP 107 /* Multi Port PPP over RAW CHDLC */ 251 252 /* 253 * Configuration options defines. 254 */ 255 /* general options */ 256 #define WANOPT_OFF 0 257 #define WANOPT_ON 1 258 #define WANOPT_NO 0 259 #define WANOPT_YES 1 260 261 /* intercace options */ 262 #define WANOPT_RS232 0 263 #define WANOPT_V35 1 264 265 /* data encoding options */ 266 #define WANOPT_NRZ 0 267 #define WANOPT_NRZI 1 268 #define WANOPT_FM0 2 269 #define WANOPT_FM1 3 270 271 /* link type options */ 272 #define WANOPT_POINTTOPOINT 0 /* RTS always active */ 273 #define WANOPT_MULTIDROP 1 /* RTS is active when transmitting */ 274 275 /* clocking options */ 276 #define WANOPT_EXTERNAL 0 277 #define WANOPT_INTERNAL 1 278 279 /* station options */ 280 #define WANOPT_DTE 0 281 #define WANOPT_DCE 1 282 #define WANOPT_CPE 0 283 #define WANOPT_NODE 1 284 #define WANOPT_SECONDARY 0 285 #define WANOPT_PRIMARY 1 286 287 /* connection options */ 288 #define WANOPT_PERMANENT 0 /* DTR always active */ 289 #define WANOPT_SWITCHED 1 /* use DTR to setup link (dial-up) */ 290 #define WANOPT_ONDEMAND 2 /* activate DTR only before sending */ 291 292 /* frame relay in-channel signalling */ 293 #define WANOPT_FR_ANSI 1 /* ANSI T1.617 Annex D */ 294 #define WANOPT_FR_Q933 2 /* ITU Q.933A */ 295 #define WANOPT_FR_LMI 3 /* LMI */ 296 297 /* PPP IP Mode Options */ 298 #define WANOPT_PPP_STATIC 0 299 #define WANOPT_PPP_HOST 1 300 #define WANOPT_PPP_PEER 2 301 302 /* ASY Mode Options */ 303 #define WANOPT_ONE 1 304 #define WANOPT_TWO 2 305 #define WANOPT_ONE_AND_HALF 3 306 307 #define WANOPT_NONE 0 308 #define WANOPT_ODD 1 309 #define WANOPT_EVEN 2 310 311 /* CHDLC Protocol Options */ 312 /* DF Commmented out for now. 313 314 #define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT 315 #define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT 316 #define WANOPT_CHDLC_NO_KEEPALIVE IGNORE_KPALV_FOR_LINK_STAT 317 */ 318 319 /* Port options */ 320 #define WANOPT_PRI 0 321 #define WANOPT_SEC 1 322 /* read mode */ 323 #define WANOPT_INTR 0 324 #define WANOPT_POLL 1 325 326 327 #define WANOPT_TTY_SYNC 0 328 #define WANOPT_TTY_ASYNC 1 329 /*---------------------------------------------------------------------------- 330 * WAN Link Status Info (for ROUTER_STAT IOCTL). 331 */ 332 typedef struct wandev_stat 333 { 334 unsigned state; /* link state */ 335 unsigned ndev; /* number of configured interfaces */ 336 337 /* link/interface configuration */ 338 unsigned connection; /* permanent/switched/on-demand */ 339 unsigned media_type; /* Frame relay/PPP/X.25/SDLC, etc. */ 340 unsigned mtu; /* max. transmit unit for this device */ 341 342 /* physical level statistics */ 343 unsigned modem_status; /* modem status */ 344 unsigned rx_frames; /* received frames count */ 345 unsigned rx_overruns; /* receiver overrun error count */ 346 unsigned rx_crc_err; /* receive CRC error count */ 347 unsigned rx_aborts; /* received aborted frames count */ 348 unsigned rx_bad_length; /* unexpetedly long/short frames count */ 349 unsigned rx_dropped; /* frames discarded at device level */ 350 unsigned tx_frames; /* transmitted frames count */ 351 unsigned tx_underruns; /* aborted transmissions (underruns) count */ 352 unsigned tx_timeouts; /* transmission timeouts */ 353 unsigned tx_rejects; /* other transmit errors */ 354 355 /* media level statistics */ 356 unsigned rx_bad_format; /* frames with invalid format */ 357 unsigned rx_bad_addr; /* frames with invalid media address */ 358 unsigned tx_retries; /* frames re-transmitted */ 359 unsigned reserved[16]; /* reserved for future use */ 360 } wandev_stat_t; 361 362 /* 'state' defines */ 363 enum wan_states 364 { 365 WAN_UNCONFIGURED, /* link/channel is not configured */ 366 WAN_DISCONNECTED, /* link/channel is disconnected */ 367 WAN_CONNECTING, /* connection is in progress */ 368 WAN_CONNECTED, /* link/channel is operational */ 369 WAN_LIMIT, /* for verification only */ 370 WAN_DUALPORT, /* for Dual Port cards */ 371 WAN_DISCONNECTING, 372 WAN_FT1_READY /* FT1 Configurator Ready */ 373 }; 374 375 enum { 376 WAN_LOCAL_IP, 377 WAN_POINTOPOINT_IP, 378 WAN_NETMASK_IP, 379 WAN_BROADCAST_IP 380 }; 381 382 /* 'modem_status' masks */ 383 #define WAN_MODEM_CTS 0x0001 /* CTS line active */ 384 #define WAN_MODEM_DCD 0x0002 /* DCD line active */ 385 #define WAN_MODEM_DTR 0x0010 /* DTR line active */ 386 #define WAN_MODEM_RTS 0x0020 /* RTS line active */ 387 388 /*---------------------------------------------------------------------------- 389 * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL). 390 */ 391 typedef struct wanif_conf 392 { 393 unsigned magic; /* magic number */ 394 unsigned config_id; /* configuration identifier */ 395 char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ 396 char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ 397 char usedby[USED_BY_FIELD]; /* used by API or WANPIPE */ 398 unsigned idle_timeout; /* sec, before disconnecting */ 399 unsigned hold_timeout; /* sec, before re-connecting */ 400 unsigned cir; /* Committed Information Rate fwd,bwd*/ 401 unsigned bc; /* Committed Burst Size fwd, bwd */ 402 unsigned be; /* Excess Burst Size fwd, bwd */ 403 unsigned char enable_IPX; /* Enable or Disable IPX */ 404 unsigned char inarp; /* Send Inverse ARP requests Y/N */ 405 unsigned inarp_interval; /* sec, between InARP requests */ 406 unsigned long network_number; /* Network Number for IPX */ 407 char mc; /* Multicast on or off */ 408 char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */ 409 unsigned char port; /* board port */ 410 unsigned char protocol; /* prococol used in this channel (TCPOX25 or X25) */ 411 char pap; /* PAP enabled or disabled */ 412 char chap; /* CHAP enabled or disabled */ 413 unsigned char userid[511]; /* List of User Id */ 414 unsigned char passwd[511]; /* List of passwords */ 415 unsigned char sysname[31]; /* Name of the system */ 416 unsigned char ignore_dcd; /* Protocol options: */ 417 unsigned char ignore_cts; /* Ignore these to determine */ 418 unsigned char ignore_keepalive; /* link status (Yes or No) */ 419 unsigned char hdlc_streaming; /* Hdlc streaming mode (Y/N) */ 420 unsigned keepalive_tx_tmr; /* transmit keepalive timer */ 421 unsigned keepalive_rx_tmr; /* receive keepalive timer */ 422 unsigned keepalive_err_margin; /* keepalive_error_tolerance */ 423 unsigned slarp_timer; /* SLARP request timer */ 424 unsigned char ttl; /* Time To Live for UDP security */ 425 char interface; /* RS-232/V.35, etc. */ 426 char clocking; /* external/internal */ 427 unsigned bps; /* data transfer rate */ 428 unsigned mtu; /* maximum transmit unit size */ 429 unsigned char if_down; /* brind down interface when disconnected */ 430 unsigned char gateway; /* Is this interface a gateway */ 431 unsigned char true_if_encoding; /* Set the dev->type to true board protocol */ 432 433 unsigned char asy_data_trans; /* async API options */ 434 unsigned char rts_hs_for_receive; /* async Protocol options */ 435 unsigned char xon_xoff_hs_for_receive; 436 unsigned char xon_xoff_hs_for_transmit; 437 unsigned char dcd_hs_for_transmit; 438 unsigned char cts_hs_for_transmit; 439 unsigned char async_mode; 440 unsigned tx_bits_per_char; 441 unsigned rx_bits_per_char; 442 unsigned stop_bits; 443 unsigned char parity; 444 unsigned break_timer; 445 unsigned inter_char_timer; 446 unsigned rx_complete_length; 447 unsigned xon_char; 448 unsigned xoff_char; 449 unsigned char receive_only; /* no transmit buffering (Y/N) */ 450 } wanif_conf_t; 451 452 #ifdef __KERNEL__ 453 /****** Kernel Interface ****************************************************/ 454 455 #include <linux/fs.h> /* support for device drivers */ 456 #include <linux/proc_fs.h> /* proc filesystem pragmatics */ 457 #include <linux/netdevice.h> /* support for network drivers */ 458 #include <linux/spinlock.h> /* Support for SMP Locking */ 459 460 /*---------------------------------------------------------------------------- 461 * WAN device data space. 462 */ 463 struct wan_device { 464 unsigned magic; /* magic number */ 465 char* name; /* -> WAN device name (ASCIIZ) */ 466 void* private; /* -> driver private data */ 467 unsigned config_id; /* Configuration ID */ 468 /****** hardware configuration ******/ 469 unsigned ioport; /* adapter I/O port base #1 */ 470 char S514_cpu_no[1]; /* PCI CPU Number */ 471 unsigned char S514_slot_no; /* PCI Slot Number */ 472 unsigned long maddr; /* dual-port memory address */ 473 unsigned msize; /* dual-port memory size */ 474 int irq; /* interrupt request level */ 475 int dma; /* DMA request level */ 476 unsigned bps; /* data transfer rate */ 477 unsigned mtu; /* max physical transmit unit size */ 478 unsigned udp_port; /* UDP port for management */ 479 unsigned char ttl; /* Time To Live for UDP security */ 480 unsigned enable_tx_int; /* Transmit Interrupt enabled or not */ 481 char interface; /* RS-232/V.35, etc. */ 482 char clocking; /* external/internal */ 483 char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */ 484 char station; /* DTE/DCE, primary/secondary, etc. */ 485 char connection; /* permanent/switched/on-demand */ 486 char signalling; /* Signalling RS232 or V35 */ 487 char read_mode; /* read mode: Polling or interrupt */ 488 char new_if_cnt; /* Number of interfaces per wanpipe */ 489 char del_if_cnt; /* Number of times del_if() gets called */ 490 unsigned char piggyback; /* Piggibacking a port */ 491 unsigned hw_opt[4]; /* other hardware options */ 492 /****** status and statistics *******/ 493 char state; /* device state */ 494 char api_status; /* device api status */ 495 struct net_device_stats stats; /* interface statistics */ 496 unsigned reserved[16]; /* reserved for future use */ 497 unsigned long critical; /* critical section flag */ 498 spinlock_t lock; /* Support for SMP Locking */ 499 500 /****** device management methods ***/ 501 int (*setup) (struct wan_device *wandev, wandev_conf_t *conf); 502 int (*shutdown) (struct wan_device *wandev); 503 int (*update) (struct wan_device *wandev); 504 int (*ioctl) (struct wan_device *wandev, unsigned cmd, 505 unsigned long arg); 506 int (*new_if)(struct wan_device *wandev, struct net_device *dev, 507 wanif_conf_t *conf); 508 int (*del_if)(struct wan_device *wandev, struct net_device *dev); 509 /****** maintained by the router ****/ 510 struct wan_device* next; /* -> next device */ 511 struct net_device* dev; /* list of network interfaces */ 512 unsigned ndev; /* number of interfaces */ 513 struct proc_dir_entry *dent; /* proc filesystem entry */ 514 }; 515 516 /* Public functions available for device drivers */ 517 extern int register_wan_device(struct wan_device *wandev); 518 extern int unregister_wan_device(char *name); 519 520 /* Proc interface functions. These must not be called by the drivers! */ 521 extern int wanrouter_proc_init(void); 522 extern void wanrouter_proc_cleanup(void); 523 extern int wanrouter_proc_add(struct wan_device *wandev); 524 extern int wanrouter_proc_delete(struct wan_device *wandev); 525 extern long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg); 526 527 /* Public Data */ 528 /* list of registered devices */ 529 extern struct wan_device *wanrouter_router_devlist; 530 531 #endif /* __KERNEL__ */ 532 #endif /* _ROUTER_H */ 533