1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2 /*
3  * VFIO API definition
4  *
5  * Copyright (C) 2012 Red Hat, Inc.  All rights reserved.
6  *     Author: Alex Williamson <alex.williamson@redhat.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  */
12 #ifndef _UAPIVFIO_H
13 #define _UAPIVFIO_H
14 
15 #include <linux/types.h>
16 #include <linux/ioctl.h>
17 
18 #define VFIO_API_VERSION	0
19 
20 
21 /* Kernel & User level defines for VFIO IOCTLs. */
22 
23 /* Extensions */
24 
25 #define VFIO_TYPE1_IOMMU		1
26 #define VFIO_SPAPR_TCE_IOMMU		2
27 #define VFIO_TYPE1v2_IOMMU		3
28 /*
29  * IOMMU enforces DMA cache coherence (ex. PCIe NoSnoop stripping).  This
30  * capability is subject to change as groups are added or removed.
31  */
32 #define VFIO_DMA_CC_IOMMU		4
33 
34 /* Check if EEH is supported */
35 #define VFIO_EEH			5
36 
37 /* Two-stage IOMMU */
38 #define VFIO_TYPE1_NESTING_IOMMU	6	/* Implies v2 */
39 
40 #define VFIO_SPAPR_TCE_v2_IOMMU		7
41 
42 /*
43  * The No-IOMMU IOMMU offers no translation or isolation for devices and
44  * supports no ioctls outside of VFIO_CHECK_EXTENSION.  Use of VFIO's No-IOMMU
45  * code will taint the host kernel and should be used with extreme caution.
46  */
47 #define VFIO_NOIOMMU_IOMMU		8
48 
49 /* Supports VFIO_DMA_UNMAP_FLAG_ALL */
50 #define VFIO_UNMAP_ALL			9
51 
52 /*
53  * Supports the vaddr flag for DMA map and unmap.  Not supported for mediated
54  * devices, so this capability is subject to change as groups are added or
55  * removed.
56  */
57 #define VFIO_UPDATE_VADDR		10
58 
59 /*
60  * The IOCTL interface is designed for extensibility by embedding the
61  * structure length (argsz) and flags into structures passed between
62  * kernel and userspace.  We therefore use the _IO() macro for these
63  * defines to avoid implicitly embedding a size into the ioctl request.
64  * As structure fields are added, argsz will increase to match and flag
65  * bits will be defined to indicate additional fields with valid data.
66  * It's *always* the caller's responsibility to indicate the size of
67  * the structure passed by setting argsz appropriately.
68  */
69 
70 #define VFIO_TYPE	(';')
71 #define VFIO_BASE	100
72 
73 /*
74  * For extension of INFO ioctls, VFIO makes use of a capability chain
75  * designed after PCI/e capabilities.  A flag bit indicates whether
76  * this capability chain is supported and a field defined in the fixed
77  * structure defines the offset of the first capability in the chain.
78  * This field is only valid when the corresponding bit in the flags
79  * bitmap is set.  This offset field is relative to the start of the
80  * INFO buffer, as is the next field within each capability header.
81  * The id within the header is a shared address space per INFO ioctl,
82  * while the version field is specific to the capability id.  The
83  * contents following the header are specific to the capability id.
84  */
85 struct vfio_info_cap_header {
86 	__u16	id;		/* Identifies capability */
87 	__u16	version;	/* Version specific to the capability ID */
88 	__u32	next;		/* Offset of next capability */
89 };
90 
91 /*
92  * Callers of INFO ioctls passing insufficiently sized buffers will see
93  * the capability chain flag bit set, a zero value for the first capability
94  * offset (if available within the provided argsz), and argsz will be
95  * updated to report the necessary buffer size.  For compatibility, the
96  * INFO ioctl will not report error in this case, but the capability chain
97  * will not be available.
98  */
99 
100 /* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
101 
102 /**
103  * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0)
104  *
105  * Report the version of the VFIO API.  This allows us to bump the entire
106  * API version should we later need to add or change features in incompatible
107  * ways.
108  * Return: VFIO_API_VERSION
109  * Availability: Always
110  */
111 #define VFIO_GET_API_VERSION		_IO(VFIO_TYPE, VFIO_BASE + 0)
112 
113 /**
114  * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32)
115  *
116  * Check whether an extension is supported.
117  * Return: 0 if not supported, 1 (or some other positive integer) if supported.
118  * Availability: Always
119  */
120 #define VFIO_CHECK_EXTENSION		_IO(VFIO_TYPE, VFIO_BASE + 1)
121 
122 /**
123  * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32)
124  *
125  * Set the iommu to the given type.  The type must be supported by an
126  * iommu driver as verified by calling CHECK_EXTENSION using the same
127  * type.  A group must be set to this file descriptor before this
128  * ioctl is available.  The IOMMU interfaces enabled by this call are
129  * specific to the value set.
130  * Return: 0 on success, -errno on failure
131  * Availability: When VFIO group attached
132  */
133 #define VFIO_SET_IOMMU			_IO(VFIO_TYPE, VFIO_BASE + 2)
134 
135 /* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */
136 
137 /**
138  * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3,
139  *						struct vfio_group_status)
140  *
141  * Retrieve information about the group.  Fills in provided
142  * struct vfio_group_info.  Caller sets argsz.
143  * Return: 0 on succes, -errno on failure.
144  * Availability: Always
145  */
146 struct vfio_group_status {
147 	__u32	argsz;
148 	__u32	flags;
149 #define VFIO_GROUP_FLAGS_VIABLE		(1 << 0)
150 #define VFIO_GROUP_FLAGS_CONTAINER_SET	(1 << 1)
151 };
152 #define VFIO_GROUP_GET_STATUS		_IO(VFIO_TYPE, VFIO_BASE + 3)
153 
154 /**
155  * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32)
156  *
157  * Set the container for the VFIO group to the open VFIO file
158  * descriptor provided.  Groups may only belong to a single
159  * container.  Containers may, at their discretion, support multiple
160  * groups.  Only when a container is set are all of the interfaces
161  * of the VFIO file descriptor and the VFIO group file descriptor
162  * available to the user.
163  * Return: 0 on success, -errno on failure.
164  * Availability: Always
165  */
166 #define VFIO_GROUP_SET_CONTAINER	_IO(VFIO_TYPE, VFIO_BASE + 4)
167 
168 /**
169  * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5)
170  *
171  * Remove the group from the attached container.  This is the
172  * opposite of the SET_CONTAINER call and returns the group to
173  * an initial state.  All device file descriptors must be released
174  * prior to calling this interface.  When removing the last group
175  * from a container, the IOMMU will be disabled and all state lost,
176  * effectively also returning the VFIO file descriptor to an initial
177  * state.
178  * Return: 0 on success, -errno on failure.
179  * Availability: When attached to container
180  */
181 #define VFIO_GROUP_UNSET_CONTAINER	_IO(VFIO_TYPE, VFIO_BASE + 5)
182 
183 /**
184  * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char)
185  *
186  * Return a new file descriptor for the device object described by
187  * the provided string.  The string should match a device listed in
188  * the devices subdirectory of the IOMMU group sysfs entry.  The
189  * group containing the device must already be added to this context.
190  * Return: new file descriptor on success, -errno on failure.
191  * Availability: When attached to container
192  */
193 #define VFIO_GROUP_GET_DEVICE_FD	_IO(VFIO_TYPE, VFIO_BASE + 6)
194 
195 /* --------------- IOCTLs for DEVICE file descriptors --------------- */
196 
197 /**
198  * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7,
199  *						struct vfio_device_info)
200  *
201  * Retrieve information about the device.  Fills in provided
202  * struct vfio_device_info.  Caller sets argsz.
203  * Return: 0 on success, -errno on failure.
204  */
205 struct vfio_device_info {
206 	__u32	argsz;
207 	__u32	flags;
208 #define VFIO_DEVICE_FLAGS_RESET	(1 << 0)	/* Device supports reset */
209 #define VFIO_DEVICE_FLAGS_PCI	(1 << 1)	/* vfio-pci device */
210 #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2)	/* vfio-platform device */
211 #define VFIO_DEVICE_FLAGS_AMBA  (1 << 3)	/* vfio-amba device */
212 #define VFIO_DEVICE_FLAGS_CCW	(1 << 4)	/* vfio-ccw device */
213 #define VFIO_DEVICE_FLAGS_AP	(1 << 5)	/* vfio-ap device */
214 #define VFIO_DEVICE_FLAGS_FSL_MC (1 << 6)	/* vfio-fsl-mc device */
215 #define VFIO_DEVICE_FLAGS_CAPS	(1 << 7)	/* Info supports caps */
216 #define VFIO_DEVICE_FLAGS_CDX	(1 << 8)	/* vfio-cdx device */
217 	__u32	num_regions;	/* Max region index + 1 */
218 	__u32	num_irqs;	/* Max IRQ index + 1 */
219 	__u32   cap_offset;	/* Offset within info struct of first cap */
220 	__u32   pad;
221 };
222 #define VFIO_DEVICE_GET_INFO		_IO(VFIO_TYPE, VFIO_BASE + 7)
223 
224 /*
225  * Vendor driver using Mediated device framework should provide device_api
226  * attribute in supported type attribute groups. Device API string should be one
227  * of the following corresponding to device flags in vfio_device_info structure.
228  */
229 
230 #define VFIO_DEVICE_API_PCI_STRING		"vfio-pci"
231 #define VFIO_DEVICE_API_PLATFORM_STRING		"vfio-platform"
232 #define VFIO_DEVICE_API_AMBA_STRING		"vfio-amba"
233 #define VFIO_DEVICE_API_CCW_STRING		"vfio-ccw"
234 #define VFIO_DEVICE_API_AP_STRING		"vfio-ap"
235 
236 /*
237  * The following capabilities are unique to s390 zPCI devices.  Their contents
238  * are further-defined in vfio_zdev.h
239  */
240 #define VFIO_DEVICE_INFO_CAP_ZPCI_BASE		1
241 #define VFIO_DEVICE_INFO_CAP_ZPCI_GROUP		2
242 #define VFIO_DEVICE_INFO_CAP_ZPCI_UTIL		3
243 #define VFIO_DEVICE_INFO_CAP_ZPCI_PFIP		4
244 
245 /*
246  * The following VFIO_DEVICE_INFO capability reports support for PCIe AtomicOp
247  * completion to the root bus with supported widths provided via flags.
248  */
249 #define VFIO_DEVICE_INFO_CAP_PCI_ATOMIC_COMP	5
250 struct vfio_device_info_cap_pci_atomic_comp {
251 	struct vfio_info_cap_header header;
252 	__u32 flags;
253 #define VFIO_PCI_ATOMIC_COMP32	(1 << 0)
254 #define VFIO_PCI_ATOMIC_COMP64	(1 << 1)
255 #define VFIO_PCI_ATOMIC_COMP128	(1 << 2)
256 	__u32 reserved;
257 };
258 
259 /**
260  * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
261  *				       struct vfio_region_info)
262  *
263  * Retrieve information about a device region.  Caller provides
264  * struct vfio_region_info with index value set.  Caller sets argsz.
265  * Implementation of region mapping is bus driver specific.  This is
266  * intended to describe MMIO, I/O port, as well as bus specific
267  * regions (ex. PCI config space).  Zero sized regions may be used
268  * to describe unimplemented regions (ex. unimplemented PCI BARs).
269  * Return: 0 on success, -errno on failure.
270  */
271 struct vfio_region_info {
272 	__u32	argsz;
273 	__u32	flags;
274 #define VFIO_REGION_INFO_FLAG_READ	(1 << 0) /* Region supports read */
275 #define VFIO_REGION_INFO_FLAG_WRITE	(1 << 1) /* Region supports write */
276 #define VFIO_REGION_INFO_FLAG_MMAP	(1 << 2) /* Region supports mmap */
277 #define VFIO_REGION_INFO_FLAG_CAPS	(1 << 3) /* Info supports caps */
278 	__u32	index;		/* Region index */
279 	__u32	cap_offset;	/* Offset within info struct of first cap */
280 	__u64	size;		/* Region size (bytes) */
281 	__u64	offset;		/* Region offset from start of device fd */
282 };
283 #define VFIO_DEVICE_GET_REGION_INFO	_IO(VFIO_TYPE, VFIO_BASE + 8)
284 
285 /*
286  * The sparse mmap capability allows finer granularity of specifying areas
287  * within a region with mmap support.  When specified, the user should only
288  * mmap the offset ranges specified by the areas array.  mmaps outside of the
289  * areas specified may fail (such as the range covering a PCI MSI-X table) or
290  * may result in improper device behavior.
291  *
292  * The structures below define version 1 of this capability.
293  */
294 #define VFIO_REGION_INFO_CAP_SPARSE_MMAP	1
295 
296 struct vfio_region_sparse_mmap_area {
297 	__u64	offset;	/* Offset of mmap'able area within region */
298 	__u64	size;	/* Size of mmap'able area */
299 };
300 
301 struct vfio_region_info_cap_sparse_mmap {
302 	struct vfio_info_cap_header header;
303 	__u32	nr_areas;
304 	__u32	reserved;
305 	struct vfio_region_sparse_mmap_area areas[];
306 };
307 
308 /*
309  * The device specific type capability allows regions unique to a specific
310  * device or class of devices to be exposed.  This helps solve the problem for
311  * vfio bus drivers of defining which region indexes correspond to which region
312  * on the device, without needing to resort to static indexes, as done by
313  * vfio-pci.  For instance, if we were to go back in time, we might remove
314  * VFIO_PCI_VGA_REGION_INDEX and let vfio-pci simply define that all indexes
315  * greater than or equal to VFIO_PCI_NUM_REGIONS are device specific and we'd
316  * make a "VGA" device specific type to describe the VGA access space.  This
317  * means that non-VGA devices wouldn't need to waste this index, and thus the
318  * address space associated with it due to implementation of device file
319  * descriptor offsets in vfio-pci.
320  *
321  * The current implementation is now part of the user ABI, so we can't use this
322  * for VGA, but there are other upcoming use cases, such as opregions for Intel
323  * IGD devices and framebuffers for vGPU devices.  We missed VGA, but we'll
324  * use this for future additions.
325  *
326  * The structure below defines version 1 of this capability.
327  */
328 #define VFIO_REGION_INFO_CAP_TYPE	2
329 
330 struct vfio_region_info_cap_type {
331 	struct vfio_info_cap_header header;
332 	__u32 type;	/* global per bus driver */
333 	__u32 subtype;	/* type specific */
334 };
335 
336 /*
337  * List of region types, global per bus driver.
338  * If you introduce a new type, please add it here.
339  */
340 
341 /* PCI region type containing a PCI vendor part */
342 #define VFIO_REGION_TYPE_PCI_VENDOR_TYPE	(1 << 31)
343 #define VFIO_REGION_TYPE_PCI_VENDOR_MASK	(0xffff)
344 #define VFIO_REGION_TYPE_GFX                    (1)
345 #define VFIO_REGION_TYPE_CCW			(2)
346 #define VFIO_REGION_TYPE_MIGRATION_DEPRECATED   (3)
347 
348 /* sub-types for VFIO_REGION_TYPE_PCI_* */
349 
350 /* 8086 vendor PCI sub-types */
351 #define VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION	(1)
352 #define VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG	(2)
353 #define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG	(3)
354 
355 /* 10de vendor PCI sub-types */
356 /*
357  * NVIDIA GPU NVlink2 RAM is coherent RAM mapped onto the host address space.
358  *
359  * Deprecated, region no longer provided
360  */
361 #define VFIO_REGION_SUBTYPE_NVIDIA_NVLINK2_RAM	(1)
362 
363 /* 1014 vendor PCI sub-types */
364 /*
365  * IBM NPU NVlink2 ATSD (Address Translation Shootdown) register of NPU
366  * to do TLB invalidation on a GPU.
367  *
368  * Deprecated, region no longer provided
369  */
370 #define VFIO_REGION_SUBTYPE_IBM_NVLINK2_ATSD	(1)
371 
372 /* sub-types for VFIO_REGION_TYPE_GFX */
373 #define VFIO_REGION_SUBTYPE_GFX_EDID            (1)
374 
375 /**
376  * struct vfio_region_gfx_edid - EDID region layout.
377  *
378  * Set display link state and EDID blob.
379  *
380  * The EDID blob has monitor information such as brand, name, serial
381  * number, physical size, supported video modes and more.
382  *
383  * This special region allows userspace (typically qemu) set a virtual
384  * EDID for the virtual monitor, which allows a flexible display
385  * configuration.
386  *
387  * For the edid blob spec look here:
388  *    https://en.wikipedia.org/wiki/Extended_Display_Identification_Data
389  *
390  * On linux systems you can find the EDID blob in sysfs:
391  *    /sys/class/drm/${card}/${connector}/edid
392  *
393  * You can use the edid-decode ulility (comes with xorg-x11-utils) to
394  * decode the EDID blob.
395  *
396  * @edid_offset: location of the edid blob, relative to the
397  *               start of the region (readonly).
398  * @edid_max_size: max size of the edid blob (readonly).
399  * @edid_size: actual edid size (read/write).
400  * @link_state: display link state (read/write).
401  * VFIO_DEVICE_GFX_LINK_STATE_UP: Monitor is turned on.
402  * VFIO_DEVICE_GFX_LINK_STATE_DOWN: Monitor is turned off.
403  * @max_xres: max display width (0 == no limitation, readonly).
404  * @max_yres: max display height (0 == no limitation, readonly).
405  *
406  * EDID update protocol:
407  *   (1) set link-state to down.
408  *   (2) update edid blob and size.
409  *   (3) set link-state to up.
410  */
411 struct vfio_region_gfx_edid {
412 	__u32 edid_offset;
413 	__u32 edid_max_size;
414 	__u32 edid_size;
415 	__u32 max_xres;
416 	__u32 max_yres;
417 	__u32 link_state;
418 #define VFIO_DEVICE_GFX_LINK_STATE_UP    1
419 #define VFIO_DEVICE_GFX_LINK_STATE_DOWN  2
420 };
421 
422 /* sub-types for VFIO_REGION_TYPE_CCW */
423 #define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD	(1)
424 #define VFIO_REGION_SUBTYPE_CCW_SCHIB		(2)
425 #define VFIO_REGION_SUBTYPE_CCW_CRW		(3)
426 
427 /* sub-types for VFIO_REGION_TYPE_MIGRATION */
428 #define VFIO_REGION_SUBTYPE_MIGRATION_DEPRECATED (1)
429 
430 struct vfio_device_migration_info {
431 	__u32 device_state;         /* VFIO device state */
432 #define VFIO_DEVICE_STATE_V1_STOP      (0)
433 #define VFIO_DEVICE_STATE_V1_RUNNING   (1 << 0)
434 #define VFIO_DEVICE_STATE_V1_SAVING    (1 << 1)
435 #define VFIO_DEVICE_STATE_V1_RESUMING  (1 << 2)
436 #define VFIO_DEVICE_STATE_MASK      (VFIO_DEVICE_STATE_V1_RUNNING | \
437 				     VFIO_DEVICE_STATE_V1_SAVING |  \
438 				     VFIO_DEVICE_STATE_V1_RESUMING)
439 
440 #define VFIO_DEVICE_STATE_VALID(state) \
441 	(state & VFIO_DEVICE_STATE_V1_RESUMING ? \
442 	(state & VFIO_DEVICE_STATE_MASK) == VFIO_DEVICE_STATE_V1_RESUMING : 1)
443 
444 #define VFIO_DEVICE_STATE_IS_ERROR(state) \
445 	((state & VFIO_DEVICE_STATE_MASK) == (VFIO_DEVICE_STATE_V1_SAVING | \
446 					      VFIO_DEVICE_STATE_V1_RESUMING))
447 
448 #define VFIO_DEVICE_STATE_SET_ERROR(state) \
449 	((state & ~VFIO_DEVICE_STATE_MASK) | VFIO_DEVICE_STATE_V1_SAVING | \
450 					     VFIO_DEVICE_STATE_V1_RESUMING)
451 
452 	__u32 reserved;
453 	__u64 pending_bytes;
454 	__u64 data_offset;
455 	__u64 data_size;
456 };
457 
458 /*
459  * The MSIX mappable capability informs that MSIX data of a BAR can be mmapped
460  * which allows direct access to non-MSIX registers which happened to be within
461  * the same system page.
462  *
463  * Even though the userspace gets direct access to the MSIX data, the existing
464  * VFIO_DEVICE_SET_IRQS interface must still be used for MSIX configuration.
465  */
466 #define VFIO_REGION_INFO_CAP_MSIX_MAPPABLE	3
467 
468 /*
469  * Capability with compressed real address (aka SSA - small system address)
470  * where GPU RAM is mapped on a system bus. Used by a GPU for DMA routing
471  * and by the userspace to associate a NVLink bridge with a GPU.
472  *
473  * Deprecated, capability no longer provided
474  */
475 #define VFIO_REGION_INFO_CAP_NVLINK2_SSATGT	4
476 
477 struct vfio_region_info_cap_nvlink2_ssatgt {
478 	struct vfio_info_cap_header header;
479 	__u64 tgt;
480 };
481 
482 /*
483  * Capability with an NVLink link speed. The value is read by
484  * the NVlink2 bridge driver from the bridge's "ibm,nvlink-speed"
485  * property in the device tree. The value is fixed in the hardware
486  * and failing to provide the correct value results in the link
487  * not working with no indication from the driver why.
488  *
489  * Deprecated, capability no longer provided
490  */
491 #define VFIO_REGION_INFO_CAP_NVLINK2_LNKSPD	5
492 
493 struct vfio_region_info_cap_nvlink2_lnkspd {
494 	struct vfio_info_cap_header header;
495 	__u32 link_speed;
496 	__u32 __pad;
497 };
498 
499 /**
500  * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
501  *				    struct vfio_irq_info)
502  *
503  * Retrieve information about a device IRQ.  Caller provides
504  * struct vfio_irq_info with index value set.  Caller sets argsz.
505  * Implementation of IRQ mapping is bus driver specific.  Indexes
506  * using multiple IRQs are primarily intended to support MSI-like
507  * interrupt blocks.  Zero count irq blocks may be used to describe
508  * unimplemented interrupt types.
509  *
510  * The EVENTFD flag indicates the interrupt index supports eventfd based
511  * signaling.
512  *
513  * The MASKABLE flags indicates the index supports MASK and UNMASK
514  * actions described below.
515  *
516  * AUTOMASKED indicates that after signaling, the interrupt line is
517  * automatically masked by VFIO and the user needs to unmask the line
518  * to receive new interrupts.  This is primarily intended to distinguish
519  * level triggered interrupts.
520  *
521  * The NORESIZE flag indicates that the interrupt lines within the index
522  * are setup as a set and new subindexes cannot be enabled without first
523  * disabling the entire index.  This is used for interrupts like PCI MSI
524  * and MSI-X where the driver may only use a subset of the available
525  * indexes, but VFIO needs to enable a specific number of vectors
526  * upfront.  In the case of MSI-X, where the user can enable MSI-X and
527  * then add and unmask vectors, it's up to userspace to make the decision
528  * whether to allocate the maximum supported number of vectors or tear
529  * down setup and incrementally increase the vectors as each is enabled.
530  * Absence of the NORESIZE flag indicates that vectors can be enabled
531  * and disabled dynamically without impacting other vectors within the
532  * index.
533  */
534 struct vfio_irq_info {
535 	__u32	argsz;
536 	__u32	flags;
537 #define VFIO_IRQ_INFO_EVENTFD		(1 << 0)
538 #define VFIO_IRQ_INFO_MASKABLE		(1 << 1)
539 #define VFIO_IRQ_INFO_AUTOMASKED	(1 << 2)
540 #define VFIO_IRQ_INFO_NORESIZE		(1 << 3)
541 	__u32	index;		/* IRQ index */
542 	__u32	count;		/* Number of IRQs within this index */
543 };
544 #define VFIO_DEVICE_GET_IRQ_INFO	_IO(VFIO_TYPE, VFIO_BASE + 9)
545 
546 /**
547  * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set)
548  *
549  * Set signaling, masking, and unmasking of interrupts.  Caller provides
550  * struct vfio_irq_set with all fields set.  'start' and 'count' indicate
551  * the range of subindexes being specified.
552  *
553  * The DATA flags specify the type of data provided.  If DATA_NONE, the
554  * operation performs the specified action immediately on the specified
555  * interrupt(s).  For example, to unmask AUTOMASKED interrupt [0,0]:
556  * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1.
557  *
558  * DATA_BOOL allows sparse support for the same on arrays of interrupts.
559  * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]):
560  * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3,
561  * data = {1,0,1}
562  *
563  * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd.
564  * A value of -1 can be used to either de-assign interrupts if already
565  * assigned or skip un-assigned interrupts.  For example, to set an eventfd
566  * to be trigger for interrupts [0,0] and [0,2]:
567  * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3,
568  * data = {fd1, -1, fd2}
569  * If index [0,1] is previously set, two count = 1 ioctls calls would be
570  * required to set [0,0] and [0,2] without changing [0,1].
571  *
572  * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used
573  * with ACTION_TRIGGER to perform kernel level interrupt loopback testing
574  * from userspace (ie. simulate hardware triggering).
575  *
576  * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER
577  * enables the interrupt index for the device.  Individual subindex interrupts
578  * can be disabled using the -1 value for DATA_EVENTFD or the index can be
579  * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
580  *
581  * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while
582  * ACTION_TRIGGER specifies kernel->user signaling.
583  */
584 struct vfio_irq_set {
585 	__u32	argsz;
586 	__u32	flags;
587 #define VFIO_IRQ_SET_DATA_NONE		(1 << 0) /* Data not present */
588 #define VFIO_IRQ_SET_DATA_BOOL		(1 << 1) /* Data is bool (u8) */
589 #define VFIO_IRQ_SET_DATA_EVENTFD	(1 << 2) /* Data is eventfd (s32) */
590 #define VFIO_IRQ_SET_ACTION_MASK	(1 << 3) /* Mask interrupt */
591 #define VFIO_IRQ_SET_ACTION_UNMASK	(1 << 4) /* Unmask interrupt */
592 #define VFIO_IRQ_SET_ACTION_TRIGGER	(1 << 5) /* Trigger interrupt */
593 	__u32	index;
594 	__u32	start;
595 	__u32	count;
596 	__u8	data[];
597 };
598 #define VFIO_DEVICE_SET_IRQS		_IO(VFIO_TYPE, VFIO_BASE + 10)
599 
600 #define VFIO_IRQ_SET_DATA_TYPE_MASK	(VFIO_IRQ_SET_DATA_NONE | \
601 					 VFIO_IRQ_SET_DATA_BOOL | \
602 					 VFIO_IRQ_SET_DATA_EVENTFD)
603 #define VFIO_IRQ_SET_ACTION_TYPE_MASK	(VFIO_IRQ_SET_ACTION_MASK | \
604 					 VFIO_IRQ_SET_ACTION_UNMASK | \
605 					 VFIO_IRQ_SET_ACTION_TRIGGER)
606 /**
607  * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11)
608  *
609  * Reset a device.
610  */
611 #define VFIO_DEVICE_RESET		_IO(VFIO_TYPE, VFIO_BASE + 11)
612 
613 /*
614  * The VFIO-PCI bus driver makes use of the following fixed region and
615  * IRQ index mapping.  Unimplemented regions return a size of zero.
616  * Unimplemented IRQ types return a count of zero.
617  */
618 
619 enum {
620 	VFIO_PCI_BAR0_REGION_INDEX,
621 	VFIO_PCI_BAR1_REGION_INDEX,
622 	VFIO_PCI_BAR2_REGION_INDEX,
623 	VFIO_PCI_BAR3_REGION_INDEX,
624 	VFIO_PCI_BAR4_REGION_INDEX,
625 	VFIO_PCI_BAR5_REGION_INDEX,
626 	VFIO_PCI_ROM_REGION_INDEX,
627 	VFIO_PCI_CONFIG_REGION_INDEX,
628 	/*
629 	 * Expose VGA regions defined for PCI base class 03, subclass 00.
630 	 * This includes I/O port ranges 0x3b0 to 0x3bb and 0x3c0 to 0x3df
631 	 * as well as the MMIO range 0xa0000 to 0xbffff.  Each implemented
632 	 * range is found at it's identity mapped offset from the region
633 	 * offset, for example 0x3b0 is region_info.offset + 0x3b0.  Areas
634 	 * between described ranges are unimplemented.
635 	 */
636 	VFIO_PCI_VGA_REGION_INDEX,
637 	VFIO_PCI_NUM_REGIONS = 9 /* Fixed user ABI, region indexes >=9 use */
638 				 /* device specific cap to define content. */
639 };
640 
641 enum {
642 	VFIO_PCI_INTX_IRQ_INDEX,
643 	VFIO_PCI_MSI_IRQ_INDEX,
644 	VFIO_PCI_MSIX_IRQ_INDEX,
645 	VFIO_PCI_ERR_IRQ_INDEX,
646 	VFIO_PCI_REQ_IRQ_INDEX,
647 	VFIO_PCI_NUM_IRQS
648 };
649 
650 /*
651  * The vfio-ccw bus driver makes use of the following fixed region and
652  * IRQ index mapping. Unimplemented regions return a size of zero.
653  * Unimplemented IRQ types return a count of zero.
654  */
655 
656 enum {
657 	VFIO_CCW_CONFIG_REGION_INDEX,
658 	VFIO_CCW_NUM_REGIONS
659 };
660 
661 enum {
662 	VFIO_CCW_IO_IRQ_INDEX,
663 	VFIO_CCW_CRW_IRQ_INDEX,
664 	VFIO_CCW_REQ_IRQ_INDEX,
665 	VFIO_CCW_NUM_IRQS
666 };
667 
668 /*
669  * The vfio-ap bus driver makes use of the following IRQ index mapping.
670  * Unimplemented IRQ types return a count of zero.
671  */
672 enum {
673 	VFIO_AP_REQ_IRQ_INDEX,
674 	VFIO_AP_NUM_IRQS
675 };
676 
677 /**
678  * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 12,
679  *					      struct vfio_pci_hot_reset_info)
680  *
681  * This command is used to query the affected devices in the hot reset for
682  * a given device.
683  *
684  * This command always reports the segment, bus, and devfn information for
685  * each affected device, and selectively reports the group_id or devid per
686  * the way how the calling device is opened.
687  *
688  *	- If the calling device is opened via the traditional group/container
689  *	  API, group_id is reported.  User should check if it has owned all
690  *	  the affected devices and provides a set of group fds to prove the
691  *	  ownership in VFIO_DEVICE_PCI_HOT_RESET ioctl.
692  *
693  *	- If the calling device is opened as a cdev, devid is reported.
694  *	  Flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set to indicate this
695  *	  data type.  All the affected devices should be represented in
696  *	  the dev_set, ex. bound to a vfio driver, and also be owned by
697  *	  this interface which is determined by the following conditions:
698  *	  1) Has a valid devid within the iommufd_ctx of the calling device.
699  *	     Ownership cannot be determined across separate iommufd_ctx and
700  *	     the cdev calling conventions do not support a proof-of-ownership
701  *	     model as provided in the legacy group interface.  In this case
702  *	     valid devid with value greater than zero is provided in the return
703  *	     structure.
704  *	  2) Does not have a valid devid within the iommufd_ctx of the calling
705  *	     device, but belongs to the same IOMMU group as the calling device
706  *	     or another opened device that has a valid devid within the
707  *	     iommufd_ctx of the calling device.  This provides implicit ownership
708  *	     for devices within the same DMA isolation context.  In this case
709  *	     the devid value of VFIO_PCI_DEVID_OWNED is provided in the return
710  *	     structure.
711  *
712  *	  A devid value of VFIO_PCI_DEVID_NOT_OWNED is provided in the return
713  *	  structure for affected devices where device is NOT represented in the
714  *	  dev_set or ownership is not available.  Such devices prevent the use
715  *	  of VFIO_DEVICE_PCI_HOT_RESET ioctl outside of the proof-of-ownership
716  *	  calling conventions (ie. via legacy group accessed devices).  Flag
717  *	  VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED would be set when all the
718  *	  affected devices are represented in the dev_set and also owned by
719  *	  the user.  This flag is available only when
720  *	  flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set, otherwise reserved.
721  *	  When set, user could invoke VFIO_DEVICE_PCI_HOT_RESET with a zero
722  *	  length fd array on the calling device as the ownership is validated
723  *	  by iommufd_ctx.
724  *
725  * Return: 0 on success, -errno on failure:
726  *	-enospc = insufficient buffer, -enodev = unsupported for device.
727  */
728 struct vfio_pci_dependent_device {
729 	union {
730 		__u32   group_id;
731 		__u32	devid;
732 #define VFIO_PCI_DEVID_OWNED		0
733 #define VFIO_PCI_DEVID_NOT_OWNED	-1
734 	};
735 	__u16	segment;
736 	__u8	bus;
737 	__u8	devfn; /* Use PCI_SLOT/PCI_FUNC */
738 };
739 
740 struct vfio_pci_hot_reset_info {
741 	__u32	argsz;
742 	__u32	flags;
743 #define VFIO_PCI_HOT_RESET_FLAG_DEV_ID		(1 << 0)
744 #define VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED	(1 << 1)
745 	__u32	count;
746 	struct vfio_pci_dependent_device	devices[];
747 };
748 
749 #define VFIO_DEVICE_GET_PCI_HOT_RESET_INFO	_IO(VFIO_TYPE, VFIO_BASE + 12)
750 
751 /**
752  * VFIO_DEVICE_PCI_HOT_RESET - _IOW(VFIO_TYPE, VFIO_BASE + 13,
753  *				    struct vfio_pci_hot_reset)
754  *
755  * A PCI hot reset results in either a bus or slot reset which may affect
756  * other devices sharing the bus/slot.  The calling user must have
757  * ownership of the full set of affected devices as determined by the
758  * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl.
759  *
760  * When called on a device file descriptor acquired through the vfio
761  * group interface, the user is required to provide proof of ownership
762  * of those affected devices via the group_fds array in struct
763  * vfio_pci_hot_reset.
764  *
765  * When called on a direct cdev opened vfio device, the flags field of
766  * struct vfio_pci_hot_reset_info reports the ownership status of the
767  * affected devices and this ioctl must be called with an empty group_fds
768  * array.  See above INFO ioctl definition for ownership requirements.
769  *
770  * Mixed usage of legacy groups and cdevs across the set of affected
771  * devices is not supported.
772  *
773  * Return: 0 on success, -errno on failure.
774  */
775 struct vfio_pci_hot_reset {
776 	__u32	argsz;
777 	__u32	flags;
778 	__u32	count;
779 	__s32	group_fds[];
780 };
781 
782 #define VFIO_DEVICE_PCI_HOT_RESET	_IO(VFIO_TYPE, VFIO_BASE + 13)
783 
784 /**
785  * VFIO_DEVICE_QUERY_GFX_PLANE - _IOW(VFIO_TYPE, VFIO_BASE + 14,
786  *                                    struct vfio_device_query_gfx_plane)
787  *
788  * Set the drm_plane_type and flags, then retrieve the gfx plane info.
789  *
790  * flags supported:
791  * - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_DMABUF are set
792  *   to ask if the mdev supports dma-buf. 0 on support, -EINVAL on no
793  *   support for dma-buf.
794  * - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_REGION are set
795  *   to ask if the mdev supports region. 0 on support, -EINVAL on no
796  *   support for region.
797  * - VFIO_GFX_PLANE_TYPE_DMABUF or VFIO_GFX_PLANE_TYPE_REGION is set
798  *   with each call to query the plane info.
799  * - Others are invalid and return -EINVAL.
800  *
801  * Note:
802  * 1. Plane could be disabled by guest. In that case, success will be
803  *    returned with zero-initialized drm_format, size, width and height
804  *    fields.
805  * 2. x_hot/y_hot is set to 0xFFFFFFFF if no hotspot information available
806  *
807  * Return: 0 on success, -errno on other failure.
808  */
809 struct vfio_device_gfx_plane_info {
810 	__u32 argsz;
811 	__u32 flags;
812 #define VFIO_GFX_PLANE_TYPE_PROBE (1 << 0)
813 #define VFIO_GFX_PLANE_TYPE_DMABUF (1 << 1)
814 #define VFIO_GFX_PLANE_TYPE_REGION (1 << 2)
815 	/* in */
816 	__u32 drm_plane_type;	/* type of plane: DRM_PLANE_TYPE_* */
817 	/* out */
818 	__u32 drm_format;	/* drm format of plane */
819 	__u64 drm_format_mod;   /* tiled mode */
820 	__u32 width;	/* width of plane */
821 	__u32 height;	/* height of plane */
822 	__u32 stride;	/* stride of plane */
823 	__u32 size;	/* size of plane in bytes, align on page*/
824 	__u32 x_pos;	/* horizontal position of cursor plane */
825 	__u32 y_pos;	/* vertical position of cursor plane*/
826 	__u32 x_hot;    /* horizontal position of cursor hotspot */
827 	__u32 y_hot;    /* vertical position of cursor hotspot */
828 	union {
829 		__u32 region_index;	/* region index */
830 		__u32 dmabuf_id;	/* dma-buf id */
831 	};
832 };
833 
834 #define VFIO_DEVICE_QUERY_GFX_PLANE _IO(VFIO_TYPE, VFIO_BASE + 14)
835 
836 /**
837  * VFIO_DEVICE_GET_GFX_DMABUF - _IOW(VFIO_TYPE, VFIO_BASE + 15, __u32)
838  *
839  * Return a new dma-buf file descriptor for an exposed guest framebuffer
840  * described by the provided dmabuf_id. The dmabuf_id is returned from VFIO_
841  * DEVICE_QUERY_GFX_PLANE as a token of the exposed guest framebuffer.
842  */
843 
844 #define VFIO_DEVICE_GET_GFX_DMABUF _IO(VFIO_TYPE, VFIO_BASE + 15)
845 
846 /**
847  * VFIO_DEVICE_IOEVENTFD - _IOW(VFIO_TYPE, VFIO_BASE + 16,
848  *                              struct vfio_device_ioeventfd)
849  *
850  * Perform a write to the device at the specified device fd offset, with
851  * the specified data and width when the provided eventfd is triggered.
852  * vfio bus drivers may not support this for all regions, for all widths,
853  * or at all.  vfio-pci currently only enables support for BAR regions,
854  * excluding the MSI-X vector table.
855  *
856  * Return: 0 on success, -errno on failure.
857  */
858 struct vfio_device_ioeventfd {
859 	__u32	argsz;
860 	__u32	flags;
861 #define VFIO_DEVICE_IOEVENTFD_8		(1 << 0) /* 1-byte write */
862 #define VFIO_DEVICE_IOEVENTFD_16	(1 << 1) /* 2-byte write */
863 #define VFIO_DEVICE_IOEVENTFD_32	(1 << 2) /* 4-byte write */
864 #define VFIO_DEVICE_IOEVENTFD_64	(1 << 3) /* 8-byte write */
865 #define VFIO_DEVICE_IOEVENTFD_SIZE_MASK	(0xf)
866 	__u64	offset;			/* device fd offset of write */
867 	__u64	data;			/* data to be written */
868 	__s32	fd;			/* -1 for de-assignment */
869 };
870 
871 #define VFIO_DEVICE_IOEVENTFD		_IO(VFIO_TYPE, VFIO_BASE + 16)
872 
873 /**
874  * VFIO_DEVICE_FEATURE - _IOWR(VFIO_TYPE, VFIO_BASE + 17,
875  *			       struct vfio_device_feature)
876  *
877  * Get, set, or probe feature data of the device.  The feature is selected
878  * using the FEATURE_MASK portion of the flags field.  Support for a feature
879  * can be probed by setting both the FEATURE_MASK and PROBE bits.  A probe
880  * may optionally include the GET and/or SET bits to determine read vs write
881  * access of the feature respectively.  Probing a feature will return success
882  * if the feature is supported and all of the optionally indicated GET/SET
883  * methods are supported.  The format of the data portion of the structure is
884  * specific to the given feature.  The data portion is not required for
885  * probing.  GET and SET are mutually exclusive, except for use with PROBE.
886  *
887  * Return 0 on success, -errno on failure.
888  */
889 struct vfio_device_feature {
890 	__u32	argsz;
891 	__u32	flags;
892 #define VFIO_DEVICE_FEATURE_MASK	(0xffff) /* 16-bit feature index */
893 #define VFIO_DEVICE_FEATURE_GET		(1 << 16) /* Get feature into data[] */
894 #define VFIO_DEVICE_FEATURE_SET		(1 << 17) /* Set feature from data[] */
895 #define VFIO_DEVICE_FEATURE_PROBE	(1 << 18) /* Probe feature support */
896 	__u8	data[];
897 };
898 
899 #define VFIO_DEVICE_FEATURE		_IO(VFIO_TYPE, VFIO_BASE + 17)
900 
901 /*
902  * VFIO_DEVICE_BIND_IOMMUFD - _IOR(VFIO_TYPE, VFIO_BASE + 18,
903  *				   struct vfio_device_bind_iommufd)
904  * @argsz:	 User filled size of this data.
905  * @flags:	 Must be 0.
906  * @iommufd:	 iommufd to bind.
907  * @out_devid:	 The device id generated by this bind. devid is a handle for
908  *		 this device/iommufd bond and can be used in IOMMUFD commands.
909  *
910  * Bind a vfio_device to the specified iommufd.
911  *
912  * User is restricted from accessing the device before the binding operation
913  * is completed.  Only allowed on cdev fds.
914  *
915  * Unbind is automatically conducted when device fd is closed.
916  *
917  * Return: 0 on success, -errno on failure.
918  */
919 struct vfio_device_bind_iommufd {
920 	__u32		argsz;
921 	__u32		flags;
922 	__s32		iommufd;
923 	__u32		out_devid;
924 };
925 
926 #define VFIO_DEVICE_BIND_IOMMUFD	_IO(VFIO_TYPE, VFIO_BASE + 18)
927 
928 /*
929  * VFIO_DEVICE_ATTACH_IOMMUFD_PT - _IOW(VFIO_TYPE, VFIO_BASE + 19,
930  *					struct vfio_device_attach_iommufd_pt)
931  * @argsz:	User filled size of this data.
932  * @flags:	Must be 0.
933  * @pt_id:	Input the target id which can represent an ioas or a hwpt
934  *		allocated via iommufd subsystem.
935  *		Output the input ioas id or the attached hwpt id which could
936  *		be the specified hwpt itself or a hwpt automatically created
937  *		for the specified ioas by kernel during the attachment.
938  *
939  * Associate the device with an address space within the bound iommufd.
940  * Undo by VFIO_DEVICE_DETACH_IOMMUFD_PT or device fd close.  This is only
941  * allowed on cdev fds.
942  *
943  * If a vfio device is currently attached to a valid hw_pagetable, without doing
944  * a VFIO_DEVICE_DETACH_IOMMUFD_PT, a second VFIO_DEVICE_ATTACH_IOMMUFD_PT ioctl
945  * passing in another hw_pagetable (hwpt) id is allowed. This action, also known
946  * as a hw_pagetable replacement, will replace the device's currently attached
947  * hw_pagetable with a new hw_pagetable corresponding to the given pt_id.
948  *
949  * Return: 0 on success, -errno on failure.
950  */
951 struct vfio_device_attach_iommufd_pt {
952 	__u32	argsz;
953 	__u32	flags;
954 	__u32	pt_id;
955 };
956 
957 #define VFIO_DEVICE_ATTACH_IOMMUFD_PT		_IO(VFIO_TYPE, VFIO_BASE + 19)
958 
959 /*
960  * VFIO_DEVICE_DETACH_IOMMUFD_PT - _IOW(VFIO_TYPE, VFIO_BASE + 20,
961  *					struct vfio_device_detach_iommufd_pt)
962  * @argsz:	User filled size of this data.
963  * @flags:	Must be 0.
964  *
965  * Remove the association of the device and its current associated address
966  * space.  After it, the device should be in a blocking DMA state.  This is only
967  * allowed on cdev fds.
968  *
969  * Return: 0 on success, -errno on failure.
970  */
971 struct vfio_device_detach_iommufd_pt {
972 	__u32	argsz;
973 	__u32	flags;
974 };
975 
976 #define VFIO_DEVICE_DETACH_IOMMUFD_PT		_IO(VFIO_TYPE, VFIO_BASE + 20)
977 
978 /*
979  * Provide support for setting a PCI VF Token, which is used as a shared
980  * secret between PF and VF drivers.  This feature may only be set on a
981  * PCI SR-IOV PF when SR-IOV is enabled on the PF and there are no existing
982  * open VFs.  Data provided when setting this feature is a 16-byte array
983  * (__u8 b[16]), representing a UUID.
984  */
985 #define VFIO_DEVICE_FEATURE_PCI_VF_TOKEN	(0)
986 
987 /*
988  * Indicates the device can support the migration API through
989  * VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE. If this GET succeeds, the RUNNING and
990  * ERROR states are always supported. Support for additional states is
991  * indicated via the flags field; at least VFIO_MIGRATION_STOP_COPY must be
992  * set.
993  *
994  * VFIO_MIGRATION_STOP_COPY means that STOP, STOP_COPY and
995  * RESUMING are supported.
996  *
997  * VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P means that RUNNING_P2P
998  * is supported in addition to the STOP_COPY states.
999  *
1000  * VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_PRE_COPY means that
1001  * PRE_COPY is supported in addition to the STOP_COPY states.
1002  *
1003  * VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P | VFIO_MIGRATION_PRE_COPY
1004  * means that RUNNING_P2P, PRE_COPY and PRE_COPY_P2P are supported
1005  * in addition to the STOP_COPY states.
1006  *
1007  * Other combinations of flags have behavior to be defined in the future.
1008  */
1009 struct vfio_device_feature_migration {
1010 	__aligned_u64 flags;
1011 #define VFIO_MIGRATION_STOP_COPY	(1 << 0)
1012 #define VFIO_MIGRATION_P2P		(1 << 1)
1013 #define VFIO_MIGRATION_PRE_COPY		(1 << 2)
1014 };
1015 #define VFIO_DEVICE_FEATURE_MIGRATION 1
1016 
1017 /*
1018  * Upon VFIO_DEVICE_FEATURE_SET, execute a migration state change on the VFIO
1019  * device. The new state is supplied in device_state, see enum
1020  * vfio_device_mig_state for details
1021  *
1022  * The kernel migration driver must fully transition the device to the new state
1023  * value before the operation returns to the user.
1024  *
1025  * The kernel migration driver must not generate asynchronous device state
1026  * transitions outside of manipulation by the user or the VFIO_DEVICE_RESET
1027  * ioctl as described above.
1028  *
1029  * If this function fails then current device_state may be the original
1030  * operating state or some other state along the combination transition path.
1031  * The user can then decide if it should execute a VFIO_DEVICE_RESET, attempt
1032  * to return to the original state, or attempt to return to some other state
1033  * such as RUNNING or STOP.
1034  *
1035  * If the new_state starts a new data transfer session then the FD associated
1036  * with that session is returned in data_fd. The user is responsible to close
1037  * this FD when it is finished. The user must consider the migration data stream
1038  * carried over the FD to be opaque and must preserve the byte order of the
1039  * stream. The user is not required to preserve buffer segmentation when writing
1040  * the data stream during the RESUMING operation.
1041  *
1042  * Upon VFIO_DEVICE_FEATURE_GET, get the current migration state of the VFIO
1043  * device, data_fd will be -1.
1044  */
1045 struct vfio_device_feature_mig_state {
1046 	__u32 device_state; /* From enum vfio_device_mig_state */
1047 	__s32 data_fd;
1048 };
1049 #define VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE 2
1050 
1051 /*
1052  * The device migration Finite State Machine is described by the enum
1053  * vfio_device_mig_state. Some of the FSM arcs will create a migration data
1054  * transfer session by returning a FD, in this case the migration data will
1055  * flow over the FD using read() and write() as discussed below.
1056  *
1057  * There are 5 states to support VFIO_MIGRATION_STOP_COPY:
1058  *  RUNNING - The device is running normally
1059  *  STOP - The device does not change the internal or external state
1060  *  STOP_COPY - The device internal state can be read out
1061  *  RESUMING - The device is stopped and is loading a new internal state
1062  *  ERROR - The device has failed and must be reset
1063  *
1064  * And optional states to support VFIO_MIGRATION_P2P:
1065  *  RUNNING_P2P - RUNNING, except the device cannot do peer to peer DMA
1066  * And VFIO_MIGRATION_PRE_COPY:
1067  *  PRE_COPY - The device is running normally but tracking internal state
1068  *             changes
1069  * And VFIO_MIGRATION_P2P | VFIO_MIGRATION_PRE_COPY:
1070  *  PRE_COPY_P2P - PRE_COPY, except the device cannot do peer to peer DMA
1071  *
1072  * The FSM takes actions on the arcs between FSM states. The driver implements
1073  * the following behavior for the FSM arcs:
1074  *
1075  * RUNNING_P2P -> STOP
1076  * STOP_COPY -> STOP
1077  *   While in STOP the device must stop the operation of the device. The device
1078  *   must not generate interrupts, DMA, or any other change to external state.
1079  *   It must not change its internal state. When stopped the device and kernel
1080  *   migration driver must accept and respond to interaction to support external
1081  *   subsystems in the STOP state, for example PCI MSI-X and PCI config space.
1082  *   Failure by the user to restrict device access while in STOP must not result
1083  *   in error conditions outside the user context (ex. host system faults).
1084  *
1085  *   The STOP_COPY arc will terminate a data transfer session.
1086  *
1087  * RESUMING -> STOP
1088  *   Leaving RESUMING terminates a data transfer session and indicates the
1089  *   device should complete processing of the data delivered by write(). The
1090  *   kernel migration driver should complete the incorporation of data written
1091  *   to the data transfer FD into the device internal state and perform
1092  *   final validity and consistency checking of the new device state. If the
1093  *   user provided data is found to be incomplete, inconsistent, or otherwise
1094  *   invalid, the migration driver must fail the SET_STATE ioctl and
1095  *   optionally go to the ERROR state as described below.
1096  *
1097  *   While in STOP the device has the same behavior as other STOP states
1098  *   described above.
1099  *
1100  *   To abort a RESUMING session the device must be reset.
1101  *
1102  * PRE_COPY -> RUNNING
1103  * RUNNING_P2P -> RUNNING
1104  *   While in RUNNING the device is fully operational, the device may generate
1105  *   interrupts, DMA, respond to MMIO, all vfio device regions are functional,
1106  *   and the device may advance its internal state.
1107  *
1108  *   The PRE_COPY arc will terminate a data transfer session.
1109  *
1110  * PRE_COPY_P2P -> RUNNING_P2P
1111  * RUNNING -> RUNNING_P2P
1112  * STOP -> RUNNING_P2P
1113  *   While in RUNNING_P2P the device is partially running in the P2P quiescent
1114  *   state defined below.
1115  *
1116  *   The PRE_COPY_P2P arc will terminate a data transfer session.
1117  *
1118  * RUNNING -> PRE_COPY
1119  * RUNNING_P2P -> PRE_COPY_P2P
1120  * STOP -> STOP_COPY
1121  *   PRE_COPY, PRE_COPY_P2P and STOP_COPY form the "saving group" of states
1122  *   which share a data transfer session. Moving between these states alters
1123  *   what is streamed in session, but does not terminate or otherwise affect
1124  *   the associated fd.
1125  *
1126  *   These arcs begin the process of saving the device state and will return a
1127  *   new data_fd. The migration driver may perform actions such as enabling
1128  *   dirty logging of device state when entering PRE_COPY or PER_COPY_P2P.
1129  *
1130  *   Each arc does not change the device operation, the device remains
1131  *   RUNNING, P2P quiesced or in STOP. The STOP_COPY state is described below
1132  *   in PRE_COPY_P2P -> STOP_COPY.
1133  *
1134  * PRE_COPY -> PRE_COPY_P2P
1135  *   Entering PRE_COPY_P2P continues all the behaviors of PRE_COPY above.
1136  *   However, while in the PRE_COPY_P2P state, the device is partially running
1137  *   in the P2P quiescent state defined below, like RUNNING_P2P.
1138  *
1139  * PRE_COPY_P2P -> PRE_COPY
1140  *   This arc allows returning the device to a full RUNNING behavior while
1141  *   continuing all the behaviors of PRE_COPY.
1142  *
1143  * PRE_COPY_P2P -> STOP_COPY
1144  *   While in the STOP_COPY state the device has the same behavior as STOP
1145  *   with the addition that the data transfers session continues to stream the
1146  *   migration state. End of stream on the FD indicates the entire device
1147  *   state has been transferred.
1148  *
1149  *   The user should take steps to restrict access to vfio device regions while
1150  *   the device is in STOP_COPY or risk corruption of the device migration data
1151  *   stream.
1152  *
1153  * STOP -> RESUMING
1154  *   Entering the RESUMING state starts a process of restoring the device state
1155  *   and will return a new data_fd. The data stream fed into the data_fd should
1156  *   be taken from the data transfer output of a single FD during saving from
1157  *   a compatible device. The migration driver may alter/reset the internal
1158  *   device state for this arc if required to prepare the device to receive the
1159  *   migration data.
1160  *
1161  * STOP_COPY -> PRE_COPY
1162  * STOP_COPY -> PRE_COPY_P2P
1163  *   These arcs are not permitted and return error if requested. Future
1164  *   revisions of this API may define behaviors for these arcs, in this case
1165  *   support will be discoverable by a new flag in
1166  *   VFIO_DEVICE_FEATURE_MIGRATION.
1167  *
1168  * any -> ERROR
1169  *   ERROR cannot be specified as a device state, however any transition request
1170  *   can be failed with an errno return and may then move the device_state into
1171  *   ERROR. In this case the device was unable to execute the requested arc and
1172  *   was also unable to restore the device to any valid device_state.
1173  *   To recover from ERROR VFIO_DEVICE_RESET must be used to return the
1174  *   device_state back to RUNNING.
1175  *
1176  * The optional peer to peer (P2P) quiescent state is intended to be a quiescent
1177  * state for the device for the purposes of managing multiple devices within a
1178  * user context where peer-to-peer DMA between devices may be active. The
1179  * RUNNING_P2P and PRE_COPY_P2P states must prevent the device from initiating
1180  * any new P2P DMA transactions. If the device can identify P2P transactions
1181  * then it can stop only P2P DMA, otherwise it must stop all DMA. The migration
1182  * driver must complete any such outstanding operations prior to completing the
1183  * FSM arc into a P2P state. For the purpose of specification the states
1184  * behave as though the device was fully running if not supported. Like while in
1185  * STOP or STOP_COPY the user must not touch the device, otherwise the state
1186  * can be exited.
1187  *
1188  * The remaining possible transitions are interpreted as combinations of the
1189  * above FSM arcs. As there are multiple paths through the FSM arcs the path
1190  * should be selected based on the following rules:
1191  *   - Select the shortest path.
1192  *   - The path cannot have saving group states as interior arcs, only
1193  *     starting/end states.
1194  * Refer to vfio_mig_get_next_state() for the result of the algorithm.
1195  *
1196  * The automatic transit through the FSM arcs that make up the combination
1197  * transition is invisible to the user. When working with combination arcs the
1198  * user may see any step along the path in the device_state if SET_STATE
1199  * fails. When handling these types of errors users should anticipate future
1200  * revisions of this protocol using new states and those states becoming
1201  * visible in this case.
1202  *
1203  * The optional states cannot be used with SET_STATE if the device does not
1204  * support them. The user can discover if these states are supported by using
1205  * VFIO_DEVICE_FEATURE_MIGRATION. By using combination transitions the user can
1206  * avoid knowing about these optional states if the kernel driver supports them.
1207  *
1208  * Arcs touching PRE_COPY and PRE_COPY_P2P are removed if support for PRE_COPY
1209  * is not present.
1210  */
1211 enum vfio_device_mig_state {
1212 	VFIO_DEVICE_STATE_ERROR = 0,
1213 	VFIO_DEVICE_STATE_STOP = 1,
1214 	VFIO_DEVICE_STATE_RUNNING = 2,
1215 	VFIO_DEVICE_STATE_STOP_COPY = 3,
1216 	VFIO_DEVICE_STATE_RESUMING = 4,
1217 	VFIO_DEVICE_STATE_RUNNING_P2P = 5,
1218 	VFIO_DEVICE_STATE_PRE_COPY = 6,
1219 	VFIO_DEVICE_STATE_PRE_COPY_P2P = 7,
1220 };
1221 
1222 /**
1223  * VFIO_MIG_GET_PRECOPY_INFO - _IO(VFIO_TYPE, VFIO_BASE + 21)
1224  *
1225  * This ioctl is used on the migration data FD in the precopy phase of the
1226  * migration data transfer. It returns an estimate of the current data sizes
1227  * remaining to be transferred. It allows the user to judge when it is
1228  * appropriate to leave PRE_COPY for STOP_COPY.
1229  *
1230  * This ioctl is valid only in PRE_COPY states and kernel driver should
1231  * return -EINVAL from any other migration state.
1232  *
1233  * The vfio_precopy_info data structure returned by this ioctl provides
1234  * estimates of data available from the device during the PRE_COPY states.
1235  * This estimate is split into two categories, initial_bytes and
1236  * dirty_bytes.
1237  *
1238  * The initial_bytes field indicates the amount of initial precopy
1239  * data available from the device. This field should have a non-zero initial
1240  * value and decrease as migration data is read from the device.
1241  * It is recommended to leave PRE_COPY for STOP_COPY only after this field
1242  * reaches zero. Leaving PRE_COPY earlier might make things slower.
1243  *
1244  * The dirty_bytes field tracks device state changes relative to data
1245  * previously retrieved.  This field starts at zero and may increase as
1246  * the internal device state is modified or decrease as that modified
1247  * state is read from the device.
1248  *
1249  * Userspace may use the combination of these fields to estimate the
1250  * potential data size available during the PRE_COPY phases, as well as
1251  * trends relative to the rate the device is dirtying its internal
1252  * state, but these fields are not required to have any bearing relative
1253  * to the data size available during the STOP_COPY phase.
1254  *
1255  * Drivers have a lot of flexibility in when and what they transfer during the
1256  * PRE_COPY phase, and how they report this from VFIO_MIG_GET_PRECOPY_INFO.
1257  *
1258  * During pre-copy the migration data FD has a temporary "end of stream" that is
1259  * reached when both initial_bytes and dirty_byte are zero. For instance, this
1260  * may indicate that the device is idle and not currently dirtying any internal
1261  * state. When read() is done on this temporary end of stream the kernel driver
1262  * should return ENOMSG from read(). Userspace can wait for more data (which may
1263  * never come) by using poll.
1264  *
1265  * Once in STOP_COPY the migration data FD has a permanent end of stream
1266  * signaled in the usual way by read() always returning 0 and poll always
1267  * returning readable. ENOMSG may not be returned in STOP_COPY.
1268  * Support for this ioctl is mandatory if a driver claims to support
1269  * VFIO_MIGRATION_PRE_COPY.
1270  *
1271  * Return: 0 on success, -1 and errno set on failure.
1272  */
1273 struct vfio_precopy_info {
1274 	__u32 argsz;
1275 	__u32 flags;
1276 	__aligned_u64 initial_bytes;
1277 	__aligned_u64 dirty_bytes;
1278 };
1279 
1280 #define VFIO_MIG_GET_PRECOPY_INFO _IO(VFIO_TYPE, VFIO_BASE + 21)
1281 
1282 /*
1283  * Upon VFIO_DEVICE_FEATURE_SET, allow the device to be moved into a low power
1284  * state with the platform-based power management.  Device use of lower power
1285  * states depends on factors managed by the runtime power management core,
1286  * including system level support and coordinating support among dependent
1287  * devices.  Enabling device low power entry does not guarantee lower power
1288  * usage by the device, nor is a mechanism provided through this feature to
1289  * know the current power state of the device.  If any device access happens
1290  * (either from the host or through the vfio uAPI) when the device is in the
1291  * low power state, then the host will move the device out of the low power
1292  * state as necessary prior to the access.  Once the access is completed, the
1293  * device may re-enter the low power state.  For single shot low power support
1294  * with wake-up notification, see
1295  * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP below.  Access to mmap'd
1296  * device regions is disabled on LOW_POWER_ENTRY and may only be resumed after
1297  * calling LOW_POWER_EXIT.
1298  */
1299 #define VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY 3
1300 
1301 /*
1302  * This device feature has the same behavior as
1303  * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY with the exception that the user
1304  * provides an eventfd for wake-up notification.  When the device moves out of
1305  * the low power state for the wake-up, the host will not allow the device to
1306  * re-enter a low power state without a subsequent user call to one of the low
1307  * power entry device feature IOCTLs.  Access to mmap'd device regions is
1308  * disabled on LOW_POWER_ENTRY_WITH_WAKEUP and may only be resumed after the
1309  * low power exit.  The low power exit can happen either through LOW_POWER_EXIT
1310  * or through any other access (where the wake-up notification has been
1311  * generated).  The access to mmap'd device regions will not trigger low power
1312  * exit.
1313  *
1314  * The notification through the provided eventfd will be generated only when
1315  * the device has entered and is resumed from a low power state after
1316  * calling this device feature IOCTL.  A device that has not entered low power
1317  * state, as managed through the runtime power management core, will not
1318  * generate a notification through the provided eventfd on access.  Calling the
1319  * LOW_POWER_EXIT feature is optional in the case where notification has been
1320  * signaled on the provided eventfd that a resume from low power has occurred.
1321  */
1322 struct vfio_device_low_power_entry_with_wakeup {
1323 	__s32 wakeup_eventfd;
1324 	__u32 reserved;
1325 };
1326 
1327 #define VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP 4
1328 
1329 /*
1330  * Upon VFIO_DEVICE_FEATURE_SET, disallow use of device low power states as
1331  * previously enabled via VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY or
1332  * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP device features.
1333  * This device feature IOCTL may itself generate a wakeup eventfd notification
1334  * in the latter case if the device had previously entered a low power state.
1335  */
1336 #define VFIO_DEVICE_FEATURE_LOW_POWER_EXIT 5
1337 
1338 /*
1339  * Upon VFIO_DEVICE_FEATURE_SET start/stop device DMA logging.
1340  * VFIO_DEVICE_FEATURE_PROBE can be used to detect if the device supports
1341  * DMA logging.
1342  *
1343  * DMA logging allows a device to internally record what DMAs the device is
1344  * initiating and report them back to userspace. It is part of the VFIO
1345  * migration infrastructure that allows implementing dirty page tracking
1346  * during the pre copy phase of live migration. Only DMA WRITEs are logged,
1347  * and this API is not connected to VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE.
1348  *
1349  * When DMA logging is started a range of IOVAs to monitor is provided and the
1350  * device can optimize its logging to cover only the IOVA range given. Each
1351  * DMA that the device initiates inside the range will be logged by the device
1352  * for later retrieval.
1353  *
1354  * page_size is an input that hints what tracking granularity the device
1355  * should try to achieve. If the device cannot do the hinted page size then
1356  * it's the driver choice which page size to pick based on its support.
1357  * On output the device will return the page size it selected.
1358  *
1359  * ranges is a pointer to an array of
1360  * struct vfio_device_feature_dma_logging_range.
1361  *
1362  * The core kernel code guarantees to support by minimum num_ranges that fit
1363  * into a single kernel page. User space can try higher values but should give
1364  * up if the above can't be achieved as of some driver limitations.
1365  *
1366  * A single call to start device DMA logging can be issued and a matching stop
1367  * should follow at the end. Another start is not allowed in the meantime.
1368  */
1369 struct vfio_device_feature_dma_logging_control {
1370 	__aligned_u64 page_size;
1371 	__u32 num_ranges;
1372 	__u32 __reserved;
1373 	__aligned_u64 ranges;
1374 };
1375 
1376 struct vfio_device_feature_dma_logging_range {
1377 	__aligned_u64 iova;
1378 	__aligned_u64 length;
1379 };
1380 
1381 #define VFIO_DEVICE_FEATURE_DMA_LOGGING_START 6
1382 
1383 /*
1384  * Upon VFIO_DEVICE_FEATURE_SET stop device DMA logging that was started
1385  * by VFIO_DEVICE_FEATURE_DMA_LOGGING_START
1386  */
1387 #define VFIO_DEVICE_FEATURE_DMA_LOGGING_STOP 7
1388 
1389 /*
1390  * Upon VFIO_DEVICE_FEATURE_GET read back and clear the device DMA log
1391  *
1392  * Query the device's DMA log for written pages within the given IOVA range.
1393  * During querying the log is cleared for the IOVA range.
1394  *
1395  * bitmap is a pointer to an array of u64s that will hold the output bitmap
1396  * with 1 bit reporting a page_size unit of IOVA. The mapping of IOVA to bits
1397  * is given by:
1398  *  bitmap[(addr - iova)/page_size] & (1ULL << (addr % 64))
1399  *
1400  * The input page_size can be any power of two value and does not have to
1401  * match the value given to VFIO_DEVICE_FEATURE_DMA_LOGGING_START. The driver
1402  * will format its internal logging to match the reporting page size, possibly
1403  * by replicating bits if the internal page size is lower than requested.
1404  *
1405  * The LOGGING_REPORT will only set bits in the bitmap and never clear or
1406  * perform any initialization of the user provided bitmap.
1407  *
1408  * If any error is returned userspace should assume that the dirty log is
1409  * corrupted. Error recovery is to consider all memory dirty and try to
1410  * restart the dirty tracking, or to abort/restart the whole migration.
1411  *
1412  * If DMA logging is not enabled, an error will be returned.
1413  *
1414  */
1415 struct vfio_device_feature_dma_logging_report {
1416 	__aligned_u64 iova;
1417 	__aligned_u64 length;
1418 	__aligned_u64 page_size;
1419 	__aligned_u64 bitmap;
1420 };
1421 
1422 #define VFIO_DEVICE_FEATURE_DMA_LOGGING_REPORT 8
1423 
1424 /*
1425  * Upon VFIO_DEVICE_FEATURE_GET read back the estimated data length that will
1426  * be required to complete stop copy.
1427  *
1428  * Note: Can be called on each device state.
1429  */
1430 
1431 struct vfio_device_feature_mig_data_size {
1432 	__aligned_u64 stop_copy_length;
1433 };
1434 
1435 #define VFIO_DEVICE_FEATURE_MIG_DATA_SIZE 9
1436 
1437 /* -------- API for Type1 VFIO IOMMU -------- */
1438 
1439 /**
1440  * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info)
1441  *
1442  * Retrieve information about the IOMMU object. Fills in provided
1443  * struct vfio_iommu_info. Caller sets argsz.
1444  *
1445  * XXX Should we do these by CHECK_EXTENSION too?
1446  */
1447 struct vfio_iommu_type1_info {
1448 	__u32	argsz;
1449 	__u32	flags;
1450 #define VFIO_IOMMU_INFO_PGSIZES (1 << 0)	/* supported page sizes info */
1451 #define VFIO_IOMMU_INFO_CAPS	(1 << 1)	/* Info supports caps */
1452 	__u64	iova_pgsizes;	/* Bitmap of supported page sizes */
1453 	__u32   cap_offset;	/* Offset within info struct of first cap */
1454 	__u32   pad;
1455 };
1456 
1457 /*
1458  * The IOVA capability allows to report the valid IOVA range(s)
1459  * excluding any non-relaxable reserved regions exposed by
1460  * devices attached to the container. Any DMA map attempt
1461  * outside the valid iova range will return error.
1462  *
1463  * The structures below define version 1 of this capability.
1464  */
1465 #define VFIO_IOMMU_TYPE1_INFO_CAP_IOVA_RANGE  1
1466 
1467 struct vfio_iova_range {
1468 	__u64	start;
1469 	__u64	end;
1470 };
1471 
1472 struct vfio_iommu_type1_info_cap_iova_range {
1473 	struct	vfio_info_cap_header header;
1474 	__u32	nr_iovas;
1475 	__u32	reserved;
1476 	struct	vfio_iova_range iova_ranges[];
1477 };
1478 
1479 /*
1480  * The migration capability allows to report supported features for migration.
1481  *
1482  * The structures below define version 1 of this capability.
1483  *
1484  * The existence of this capability indicates that IOMMU kernel driver supports
1485  * dirty page logging.
1486  *
1487  * pgsize_bitmap: Kernel driver returns bitmap of supported page sizes for dirty
1488  * page logging.
1489  * max_dirty_bitmap_size: Kernel driver returns maximum supported dirty bitmap
1490  * size in bytes that can be used by user applications when getting the dirty
1491  * bitmap.
1492  */
1493 #define VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION  2
1494 
1495 struct vfio_iommu_type1_info_cap_migration {
1496 	struct	vfio_info_cap_header header;
1497 	__u32	flags;
1498 	__u64	pgsize_bitmap;
1499 	__u64	max_dirty_bitmap_size;		/* in bytes */
1500 };
1501 
1502 /*
1503  * The DMA available capability allows to report the current number of
1504  * simultaneously outstanding DMA mappings that are allowed.
1505  *
1506  * The structure below defines version 1 of this capability.
1507  *
1508  * avail: specifies the current number of outstanding DMA mappings allowed.
1509  */
1510 #define VFIO_IOMMU_TYPE1_INFO_DMA_AVAIL 3
1511 
1512 struct vfio_iommu_type1_info_dma_avail {
1513 	struct	vfio_info_cap_header header;
1514 	__u32	avail;
1515 };
1516 
1517 #define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
1518 
1519 /**
1520  * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map)
1521  *
1522  * Map process virtual addresses to IO virtual addresses using the
1523  * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
1524  *
1525  * If flags & VFIO_DMA_MAP_FLAG_VADDR, update the base vaddr for iova. The vaddr
1526  * must have previously been invalidated with VFIO_DMA_UNMAP_FLAG_VADDR.  To
1527  * maintain memory consistency within the user application, the updated vaddr
1528  * must address the same memory object as originally mapped.  Failure to do so
1529  * will result in user memory corruption and/or device misbehavior.  iova and
1530  * size must match those in the original MAP_DMA call.  Protection is not
1531  * changed, and the READ & WRITE flags must be 0.
1532  */
1533 struct vfio_iommu_type1_dma_map {
1534 	__u32	argsz;
1535 	__u32	flags;
1536 #define VFIO_DMA_MAP_FLAG_READ (1 << 0)		/* readable from device */
1537 #define VFIO_DMA_MAP_FLAG_WRITE (1 << 1)	/* writable from device */
1538 #define VFIO_DMA_MAP_FLAG_VADDR (1 << 2)
1539 	__u64	vaddr;				/* Process virtual address */
1540 	__u64	iova;				/* IO virtual address */
1541 	__u64	size;				/* Size of mapping (bytes) */
1542 };
1543 
1544 #define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
1545 
1546 struct vfio_bitmap {
1547 	__u64        pgsize;	/* page size for bitmap in bytes */
1548 	__u64        size;	/* in bytes */
1549 	__u64 __user *data;	/* one bit per page */
1550 };
1551 
1552 /**
1553  * VFIO_IOMMU_UNMAP_DMA - _IOWR(VFIO_TYPE, VFIO_BASE + 14,
1554  *							struct vfio_dma_unmap)
1555  *
1556  * Unmap IO virtual addresses using the provided struct vfio_dma_unmap.
1557  * Caller sets argsz.  The actual unmapped size is returned in the size
1558  * field.  No guarantee is made to the user that arbitrary unmaps of iova
1559  * or size different from those used in the original mapping call will
1560  * succeed.
1561  *
1562  * VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP should be set to get the dirty bitmap
1563  * before unmapping IO virtual addresses. When this flag is set, the user must
1564  * provide a struct vfio_bitmap in data[]. User must provide zero-allocated
1565  * memory via vfio_bitmap.data and its size in the vfio_bitmap.size field.
1566  * A bit in the bitmap represents one page, of user provided page size in
1567  * vfio_bitmap.pgsize field, consecutively starting from iova offset. Bit set
1568  * indicates that the page at that offset from iova is dirty. A Bitmap of the
1569  * pages in the range of unmapped size is returned in the user-provided
1570  * vfio_bitmap.data.
1571  *
1572  * If flags & VFIO_DMA_UNMAP_FLAG_ALL, unmap all addresses.  iova and size
1573  * must be 0.  This cannot be combined with the get-dirty-bitmap flag.
1574  *
1575  * If flags & VFIO_DMA_UNMAP_FLAG_VADDR, do not unmap, but invalidate host
1576  * virtual addresses in the iova range.  DMA to already-mapped pages continues.
1577  * Groups may not be added to the container while any addresses are invalid.
1578  * This cannot be combined with the get-dirty-bitmap flag.
1579  */
1580 struct vfio_iommu_type1_dma_unmap {
1581 	__u32	argsz;
1582 	__u32	flags;
1583 #define VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP (1 << 0)
1584 #define VFIO_DMA_UNMAP_FLAG_ALL		     (1 << 1)
1585 #define VFIO_DMA_UNMAP_FLAG_VADDR	     (1 << 2)
1586 	__u64	iova;				/* IO virtual address */
1587 	__u64	size;				/* Size of mapping (bytes) */
1588 	__u8    data[];
1589 };
1590 
1591 #define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
1592 
1593 /*
1594  * IOCTLs to enable/disable IOMMU container usage.
1595  * No parameters are supported.
1596  */
1597 #define VFIO_IOMMU_ENABLE	_IO(VFIO_TYPE, VFIO_BASE + 15)
1598 #define VFIO_IOMMU_DISABLE	_IO(VFIO_TYPE, VFIO_BASE + 16)
1599 
1600 /**
1601  * VFIO_IOMMU_DIRTY_PAGES - _IOWR(VFIO_TYPE, VFIO_BASE + 17,
1602  *                                     struct vfio_iommu_type1_dirty_bitmap)
1603  * IOCTL is used for dirty pages logging.
1604  * Caller should set flag depending on which operation to perform, details as
1605  * below:
1606  *
1607  * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_START flag set, instructs
1608  * the IOMMU driver to log pages that are dirtied or potentially dirtied by
1609  * the device; designed to be used when a migration is in progress. Dirty pages
1610  * are logged until logging is disabled by user application by calling the IOCTL
1611  * with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag.
1612  *
1613  * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag set, instructs
1614  * the IOMMU driver to stop logging dirtied pages.
1615  *
1616  * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP flag set
1617  * returns the dirty pages bitmap for IOMMU container for a given IOVA range.
1618  * The user must specify the IOVA range and the pgsize through the structure
1619  * vfio_iommu_type1_dirty_bitmap_get in the data[] portion. This interface
1620  * supports getting a bitmap of the smallest supported pgsize only and can be
1621  * modified in future to get a bitmap of any specified supported pgsize. The
1622  * user must provide a zeroed memory area for the bitmap memory and specify its
1623  * size in bitmap.size. One bit is used to represent one page consecutively
1624  * starting from iova offset. The user should provide page size in bitmap.pgsize
1625  * field. A bit set in the bitmap indicates that the page at that offset from
1626  * iova is dirty. The caller must set argsz to a value including the size of
1627  * structure vfio_iommu_type1_dirty_bitmap_get, but excluding the size of the
1628  * actual bitmap. If dirty pages logging is not enabled, an error will be
1629  * returned.
1630  *
1631  * Only one of the flags _START, _STOP and _GET may be specified at a time.
1632  *
1633  */
1634 struct vfio_iommu_type1_dirty_bitmap {
1635 	__u32        argsz;
1636 	__u32        flags;
1637 #define VFIO_IOMMU_DIRTY_PAGES_FLAG_START	(1 << 0)
1638 #define VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP	(1 << 1)
1639 #define VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP	(1 << 2)
1640 	__u8         data[];
1641 };
1642 
1643 struct vfio_iommu_type1_dirty_bitmap_get {
1644 	__u64              iova;	/* IO virtual address */
1645 	__u64              size;	/* Size of iova range */
1646 	struct vfio_bitmap bitmap;
1647 };
1648 
1649 #define VFIO_IOMMU_DIRTY_PAGES             _IO(VFIO_TYPE, VFIO_BASE + 17)
1650 
1651 /* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */
1652 
1653 /*
1654  * The SPAPR TCE DDW info struct provides the information about
1655  * the details of Dynamic DMA window capability.
1656  *
1657  * @pgsizes contains a page size bitmask, 4K/64K/16M are supported.
1658  * @max_dynamic_windows_supported tells the maximum number of windows
1659  * which the platform can create.
1660  * @levels tells the maximum number of levels in multi-level IOMMU tables;
1661  * this allows splitting a table into smaller chunks which reduces
1662  * the amount of physically contiguous memory required for the table.
1663  */
1664 struct vfio_iommu_spapr_tce_ddw_info {
1665 	__u64 pgsizes;			/* Bitmap of supported page sizes */
1666 	__u32 max_dynamic_windows_supported;
1667 	__u32 levels;
1668 };
1669 
1670 /*
1671  * The SPAPR TCE info struct provides the information about the PCI bus
1672  * address ranges available for DMA, these values are programmed into
1673  * the hardware so the guest has to know that information.
1674  *
1675  * The DMA 32 bit window start is an absolute PCI bus address.
1676  * The IOVA address passed via map/unmap ioctls are absolute PCI bus
1677  * addresses too so the window works as a filter rather than an offset
1678  * for IOVA addresses.
1679  *
1680  * Flags supported:
1681  * - VFIO_IOMMU_SPAPR_INFO_DDW: informs the userspace that dynamic DMA windows
1682  *   (DDW) support is present. @ddw is only supported when DDW is present.
1683  */
1684 struct vfio_iommu_spapr_tce_info {
1685 	__u32 argsz;
1686 	__u32 flags;
1687 #define VFIO_IOMMU_SPAPR_INFO_DDW	(1 << 0)	/* DDW supported */
1688 	__u32 dma32_window_start;	/* 32 bit window start (bytes) */
1689 	__u32 dma32_window_size;	/* 32 bit window size (bytes) */
1690 	struct vfio_iommu_spapr_tce_ddw_info ddw;
1691 };
1692 
1693 #define VFIO_IOMMU_SPAPR_TCE_GET_INFO	_IO(VFIO_TYPE, VFIO_BASE + 12)
1694 
1695 /*
1696  * EEH PE operation struct provides ways to:
1697  * - enable/disable EEH functionality;
1698  * - unfreeze IO/DMA for frozen PE;
1699  * - read PE state;
1700  * - reset PE;
1701  * - configure PE;
1702  * - inject EEH error.
1703  */
1704 struct vfio_eeh_pe_err {
1705 	__u32 type;
1706 	__u32 func;
1707 	__u64 addr;
1708 	__u64 mask;
1709 };
1710 
1711 struct vfio_eeh_pe_op {
1712 	__u32 argsz;
1713 	__u32 flags;
1714 	__u32 op;
1715 	union {
1716 		struct vfio_eeh_pe_err err;
1717 	};
1718 };
1719 
1720 #define VFIO_EEH_PE_DISABLE		0	/* Disable EEH functionality */
1721 #define VFIO_EEH_PE_ENABLE		1	/* Enable EEH functionality  */
1722 #define VFIO_EEH_PE_UNFREEZE_IO		2	/* Enable IO for frozen PE   */
1723 #define VFIO_EEH_PE_UNFREEZE_DMA	3	/* Enable DMA for frozen PE  */
1724 #define VFIO_EEH_PE_GET_STATE		4	/* PE state retrieval        */
1725 #define  VFIO_EEH_PE_STATE_NORMAL	0	/* PE in functional state    */
1726 #define  VFIO_EEH_PE_STATE_RESET	1	/* PE reset in progress      */
1727 #define  VFIO_EEH_PE_STATE_STOPPED	2	/* Stopped DMA and IO        */
1728 #define  VFIO_EEH_PE_STATE_STOPPED_DMA	4	/* Stopped DMA only          */
1729 #define  VFIO_EEH_PE_STATE_UNAVAIL	5	/* State unavailable         */
1730 #define VFIO_EEH_PE_RESET_DEACTIVATE	5	/* Deassert PE reset         */
1731 #define VFIO_EEH_PE_RESET_HOT		6	/* Assert hot reset          */
1732 #define VFIO_EEH_PE_RESET_FUNDAMENTAL	7	/* Assert fundamental reset  */
1733 #define VFIO_EEH_PE_CONFIGURE		8	/* PE configuration          */
1734 #define VFIO_EEH_PE_INJECT_ERR		9	/* Inject EEH error          */
1735 
1736 #define VFIO_EEH_PE_OP			_IO(VFIO_TYPE, VFIO_BASE + 21)
1737 
1738 /**
1739  * VFIO_IOMMU_SPAPR_REGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 17, struct vfio_iommu_spapr_register_memory)
1740  *
1741  * Registers user space memory where DMA is allowed. It pins
1742  * user pages and does the locked memory accounting so
1743  * subsequent VFIO_IOMMU_MAP_DMA/VFIO_IOMMU_UNMAP_DMA calls
1744  * get faster.
1745  */
1746 struct vfio_iommu_spapr_register_memory {
1747 	__u32	argsz;
1748 	__u32	flags;
1749 	__u64	vaddr;				/* Process virtual address */
1750 	__u64	size;				/* Size of mapping (bytes) */
1751 };
1752 #define VFIO_IOMMU_SPAPR_REGISTER_MEMORY	_IO(VFIO_TYPE, VFIO_BASE + 17)
1753 
1754 /**
1755  * VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 18, struct vfio_iommu_spapr_register_memory)
1756  *
1757  * Unregisters user space memory registered with
1758  * VFIO_IOMMU_SPAPR_REGISTER_MEMORY.
1759  * Uses vfio_iommu_spapr_register_memory for parameters.
1760  */
1761 #define VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY	_IO(VFIO_TYPE, VFIO_BASE + 18)
1762 
1763 /**
1764  * VFIO_IOMMU_SPAPR_TCE_CREATE - _IOWR(VFIO_TYPE, VFIO_BASE + 19, struct vfio_iommu_spapr_tce_create)
1765  *
1766  * Creates an additional TCE table and programs it (sets a new DMA window)
1767  * to every IOMMU group in the container. It receives page shift, window
1768  * size and number of levels in the TCE table being created.
1769  *
1770  * It allocates and returns an offset on a PCI bus of the new DMA window.
1771  */
1772 struct vfio_iommu_spapr_tce_create {
1773 	__u32 argsz;
1774 	__u32 flags;
1775 	/* in */
1776 	__u32 page_shift;
1777 	__u32 __resv1;
1778 	__u64 window_size;
1779 	__u32 levels;
1780 	__u32 __resv2;
1781 	/* out */
1782 	__u64 start_addr;
1783 };
1784 #define VFIO_IOMMU_SPAPR_TCE_CREATE	_IO(VFIO_TYPE, VFIO_BASE + 19)
1785 
1786 /**
1787  * VFIO_IOMMU_SPAPR_TCE_REMOVE - _IOW(VFIO_TYPE, VFIO_BASE + 20, struct vfio_iommu_spapr_tce_remove)
1788  *
1789  * Unprograms a TCE table from all groups in the container and destroys it.
1790  * It receives a PCI bus offset as a window id.
1791  */
1792 struct vfio_iommu_spapr_tce_remove {
1793 	__u32 argsz;
1794 	__u32 flags;
1795 	/* in */
1796 	__u64 start_addr;
1797 };
1798 #define VFIO_IOMMU_SPAPR_TCE_REMOVE	_IO(VFIO_TYPE, VFIO_BASE + 20)
1799 
1800 /* ***************************************************************** */
1801 
1802 #endif /* _UAPIVFIO_H */
1803