1 /* 2 * arch/arm/mach-spear3xx/include/mach/spear300.h 3 * 4 * SPEAr300 Machine specific definition 5 * 6 * Copyright (C) 2009 ST Microelectronics 7 * Viresh Kumar<viresh.kumar@st.com> 8 * 9 * This file is licensed under the terms of the GNU General Public 10 * License version 2. This program is licensed "as is" without any 11 * warranty of any kind, whether express or implied. 12 */ 13 14 #ifdef CONFIG_MACH_SPEAR300 15 16 #ifndef __MACH_SPEAR300_H 17 #define __MACH_SPEAR300_H 18 19 /* Base address of various IPs */ 20 #define SPEAR300_TELECOM_BASE UL(0x50000000) 21 22 /* Interrupt registers offsets and masks */ 23 #define SPEAR300_INT_ENB_MASK_REG 0x54 24 #define SPEAR300_INT_STS_MASK_REG 0x58 25 #define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0) 26 #define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1) 27 #define SPEAR300_I2S_IRQ_MASK (1 << 2) 28 #define SPEAR300_TDM_IRQ_MASK (1 << 3) 29 #define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4) 30 #define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5) 31 #define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6) 32 #define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7) 33 #define SPEAR300_GPIO1_IRQ_MASK (1 << 8) 34 35 #define SPEAR300_SHIRQ_RAS1_MASK 0x1FF 36 37 #define SPEAR300_CLCD_BASE UL(0x60000000) 38 #define SPEAR300_SDHCI_BASE UL(0x70000000) 39 #define SPEAR300_NAND_0_BASE UL(0x80000000) 40 #define SPEAR300_NAND_1_BASE UL(0x84000000) 41 #define SPEAR300_NAND_2_BASE UL(0x88000000) 42 #define SPEAR300_NAND_3_BASE UL(0x8c000000) 43 #define SPEAR300_NOR_0_BASE UL(0x90000000) 44 #define SPEAR300_NOR_1_BASE UL(0x91000000) 45 #define SPEAR300_NOR_2_BASE UL(0x92000000) 46 #define SPEAR300_NOR_3_BASE UL(0x93000000) 47 #define SPEAR300_FSMC_BASE UL(0x94000000) 48 #define SPEAR300_SOC_CONFIG_BASE UL(0x99000000) 49 #define SPEAR300_KEYBOARD_BASE UL(0xA0000000) 50 #define SPEAR300_GPIO_BASE UL(0xA9000000) 51 52 #endif /* __MACH_SPEAR300_H */ 53 54 #endif /* CONFIG_MACH_SPEAR300 */ 55