1 /* 2 * INET An implementation of the TCP/IP protocol suite for the LINUX 3 * operating system. INET is implemented using the BSD Socket 4 * interface as the means of communication with the user level. 5 * 6 * Definitions of the socket-level I/O control calls. 7 * 8 * Version: @(#)sockios.h 1.0.2 03/09/93 9 * 10 * Authors: Ross Biro 11 * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> 12 * 13 * This program is free software; you can redistribute it and/or 14 * modify it under the terms of the GNU General Public License 15 * as published by the Free Software Foundation; either version 16 * 2 of the License, or (at your option) any later version. 17 */ 18 #ifndef _LINUX_SOCKIOS_H 19 #define _LINUX_SOCKIOS_H 20 21 #include <asm/sockios.h> 22 23 /* Linux-specific socket ioctls */ 24 #define SIOCINQ FIONREAD 25 #define SIOCOUTQ TIOCOUTQ /* output queue size (not sent + not acked) */ 26 27 /* Routing table calls. */ 28 #define SIOCADDRT 0x890B /* add routing table entry */ 29 #define SIOCDELRT 0x890C /* delete routing table entry */ 30 #define SIOCRTMSG 0x890D /* call to routing system */ 31 32 /* Socket configuration controls. */ 33 #define SIOCGIFNAME 0x8910 /* get iface name */ 34 #define SIOCSIFLINK 0x8911 /* set iface channel */ 35 #define SIOCGIFCONF 0x8912 /* get iface list */ 36 #define SIOCGIFFLAGS 0x8913 /* get flags */ 37 #define SIOCSIFFLAGS 0x8914 /* set flags */ 38 #define SIOCGIFADDR 0x8915 /* get PA address */ 39 #define SIOCSIFADDR 0x8916 /* set PA address */ 40 #define SIOCGIFDSTADDR 0x8917 /* get remote PA address */ 41 #define SIOCSIFDSTADDR 0x8918 /* set remote PA address */ 42 #define SIOCGIFBRDADDR 0x8919 /* get broadcast PA address */ 43 #define SIOCSIFBRDADDR 0x891a /* set broadcast PA address */ 44 #define SIOCGIFNETMASK 0x891b /* get network PA mask */ 45 #define SIOCSIFNETMASK 0x891c /* set network PA mask */ 46 #define SIOCGIFMETRIC 0x891d /* get metric */ 47 #define SIOCSIFMETRIC 0x891e /* set metric */ 48 #define SIOCGIFMEM 0x891f /* get memory address (BSD) */ 49 #define SIOCSIFMEM 0x8920 /* set memory address (BSD) */ 50 #define SIOCGIFMTU 0x8921 /* get MTU size */ 51 #define SIOCSIFMTU 0x8922 /* set MTU size */ 52 #define SIOCSIFNAME 0x8923 /* set interface name */ 53 #define SIOCSIFHWADDR 0x8924 /* set hardware address */ 54 #define SIOCGIFENCAP 0x8925 /* get/set encapsulations */ 55 #define SIOCSIFENCAP 0x8926 56 #define SIOCGIFHWADDR 0x8927 /* Get hardware address */ 57 #define SIOCGIFSLAVE 0x8929 /* Driver slaving support */ 58 #define SIOCSIFSLAVE 0x8930 59 #define SIOCADDMULTI 0x8931 /* Multicast address lists */ 60 #define SIOCDELMULTI 0x8932 61 #define SIOCGIFINDEX 0x8933 /* name -> if_index mapping */ 62 #define SIOGIFINDEX SIOCGIFINDEX /* misprint compatibility :-) */ 63 #define SIOCSIFPFLAGS 0x8934 /* set/get extended flags set */ 64 #define SIOCGIFPFLAGS 0x8935 65 #define SIOCDIFADDR 0x8936 /* delete PA address */ 66 #define SIOCSIFHWBROADCAST 0x8937 /* set hardware broadcast addr */ 67 #define SIOCGIFCOUNT 0x8938 /* get number of devices */ 68 69 #define SIOCGIFBR 0x8940 /* Bridging support */ 70 #define SIOCSIFBR 0x8941 /* Set bridging options */ 71 72 #define SIOCGIFTXQLEN 0x8942 /* Get the tx queue length */ 73 #define SIOCSIFTXQLEN 0x8943 /* Set the tx queue length */ 74 75 /* SIOCGIFDIVERT was: 0x8944 Frame diversion support */ 76 /* SIOCSIFDIVERT was: 0x8945 Set frame diversion options */ 77 78 #define SIOCETHTOOL 0x8946 /* Ethtool interface */ 79 80 #define SIOCGMIIPHY 0x8947 /* Get address of MII PHY in use. */ 81 #define SIOCGMIIREG 0x8948 /* Read MII PHY register. */ 82 #define SIOCSMIIREG 0x8949 /* Write MII PHY register. */ 83 84 #define SIOCWANDEV 0x894A /* get/set netdev parameters */ 85 86 #define SIOCOUTQNSD 0x894B /* output queue size (not sent only) */ 87 88 /* ARP cache control calls. */ 89 /* 0x8950 - 0x8952 * obsolete calls, don't re-use */ 90 #define SIOCDARP 0x8953 /* delete ARP table entry */ 91 #define SIOCGARP 0x8954 /* get ARP table entry */ 92 #define SIOCSARP 0x8955 /* set ARP table entry */ 93 94 /* RARP cache control calls. */ 95 #define SIOCDRARP 0x8960 /* delete RARP table entry */ 96 #define SIOCGRARP 0x8961 /* get RARP table entry */ 97 #define SIOCSRARP 0x8962 /* set RARP table entry */ 98 99 /* Driver configuration calls */ 100 101 #define SIOCGIFMAP 0x8970 /* Get device parameters */ 102 #define SIOCSIFMAP 0x8971 /* Set device parameters */ 103 104 /* DLCI configuration calls */ 105 106 #define SIOCADDDLCI 0x8980 /* Create new DLCI device */ 107 #define SIOCDELDLCI 0x8981 /* Delete DLCI device */ 108 109 #define SIOCGIFVLAN 0x8982 /* 802.1Q VLAN support */ 110 #define SIOCSIFVLAN 0x8983 /* Set 802.1Q VLAN options */ 111 112 /* bonding calls */ 113 114 #define SIOCBONDENSLAVE 0x8990 /* enslave a device to the bond */ 115 #define SIOCBONDRELEASE 0x8991 /* release a slave from the bond*/ 116 #define SIOCBONDSETHWADDR 0x8992 /* set the hw addr of the bond */ 117 #define SIOCBONDSLAVEINFOQUERY 0x8993 /* rtn info about slave state */ 118 #define SIOCBONDINFOQUERY 0x8994 /* rtn info about bond state */ 119 #define SIOCBONDCHANGEACTIVE 0x8995 /* update to a new active slave */ 120 121 /* bridge calls */ 122 #define SIOCBRADDBR 0x89a0 /* create new bridge device */ 123 #define SIOCBRDELBR 0x89a1 /* remove bridge device */ 124 #define SIOCBRADDIF 0x89a2 /* add interface to bridge */ 125 #define SIOCBRDELIF 0x89a3 /* remove interface from bridge */ 126 127 /* hardware time stamping: parameters in linux/net_tstamp.h */ 128 #define SIOCSHWTSTAMP 0x89b0 129 130 /* Device private ioctl calls */ 131 132 /* 133 * These 16 ioctls are available to devices via the do_ioctl() device 134 * vector. Each device should include this file and redefine these names 135 * as their own. Because these are device dependent it is a good idea 136 * _NOT_ to issue them to random objects and hope. 137 * 138 * THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM 139 */ 140 141 #define SIOCDEVPRIVATE 0x89F0 /* to 89FF */ 142 143 /* 144 * These 16 ioctl calls are protocol private 145 */ 146 147 #define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */ 148 #endif /* _LINUX_SOCKIOS_H */ 149