1 /* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
2 /* Copyright(c) 2015-17 Intel Corporation. */
3
4 #ifndef __SDW_BUS_H
5 #define __SDW_BUS_H
6
7 #define DEFAULT_BANK_SWITCH_TIMEOUT 3000
8 #define DEFAULT_PROBE_TIMEOUT 2000
9
10 u64 sdw_dmi_override_adr(struct sdw_bus *bus, u64 addr);
11
12 #if IS_ENABLED(CONFIG_ACPI)
13 int sdw_acpi_find_slaves(struct sdw_bus *bus);
14 #else
sdw_acpi_find_slaves(struct sdw_bus * bus)15 static inline int sdw_acpi_find_slaves(struct sdw_bus *bus)
16 {
17 return -ENOTSUPP;
18 }
19 #endif
20
21 int sdw_of_find_slaves(struct sdw_bus *bus);
22 void sdw_extract_slave_id(struct sdw_bus *bus,
23 u64 addr, struct sdw_slave_id *id);
24 int sdw_slave_add(struct sdw_bus *bus, struct sdw_slave_id *id,
25 struct fwnode_handle *fwnode);
26 int sdw_master_device_add(struct sdw_bus *bus, struct device *parent,
27 struct fwnode_handle *fwnode);
28 int sdw_master_device_del(struct sdw_bus *bus);
29
30 #ifdef CONFIG_DEBUG_FS
31 void sdw_bus_debugfs_init(struct sdw_bus *bus);
32 void sdw_bus_debugfs_exit(struct sdw_bus *bus);
33 void sdw_slave_debugfs_init(struct sdw_slave *slave);
34 void sdw_slave_debugfs_exit(struct sdw_slave *slave);
35 void sdw_debugfs_init(void);
36 void sdw_debugfs_exit(void);
37 #else
sdw_bus_debugfs_init(struct sdw_bus * bus)38 static inline void sdw_bus_debugfs_init(struct sdw_bus *bus) {}
sdw_bus_debugfs_exit(struct sdw_bus * bus)39 static inline void sdw_bus_debugfs_exit(struct sdw_bus *bus) {}
sdw_slave_debugfs_init(struct sdw_slave * slave)40 static inline void sdw_slave_debugfs_init(struct sdw_slave *slave) {}
sdw_slave_debugfs_exit(struct sdw_slave * slave)41 static inline void sdw_slave_debugfs_exit(struct sdw_slave *slave) {}
sdw_debugfs_init(void)42 static inline void sdw_debugfs_init(void) {}
sdw_debugfs_exit(void)43 static inline void sdw_debugfs_exit(void) {}
44 #endif
45
46 enum {
47 SDW_MSG_FLAG_READ = 0,
48 SDW_MSG_FLAG_WRITE,
49 };
50
51 /**
52 * struct sdw_msg - Message structure
53 * @addr: Register address accessed in the Slave
54 * @len: number of messages
55 * @dev_num: Slave device number
56 * @addr_page1: SCP address page 1 Slave register
57 * @addr_page2: SCP address page 2 Slave register
58 * @flags: transfer flags, indicate if xfer is read or write
59 * @buf: message data buffer
60 * @ssp_sync: Send message at SSP (Stream Synchronization Point)
61 * @page: address requires paging
62 */
63 struct sdw_msg {
64 u16 addr;
65 u16 len;
66 u8 dev_num;
67 u8 addr_page1;
68 u8 addr_page2;
69 u8 flags;
70 u8 *buf;
71 bool ssp_sync;
72 bool page;
73 };
74
75 #define SDW_DOUBLE_RATE_FACTOR 2
76 #define SDW_STRM_RATE_GROUPING 1
77
78 extern int sdw_rows[SDW_FRAME_ROWS];
79 extern int sdw_cols[SDW_FRAME_COLS];
80
81 int sdw_find_row_index(int row);
82 int sdw_find_col_index(int col);
83
84 /**
85 * sdw_port_runtime: Runtime port parameters for Master or Slave
86 *
87 * @num: Port number. For audio streams, valid port number ranges from
88 * [1,14]
89 * @ch_mask: Channel mask
90 * @transport_params: Transport parameters
91 * @port_params: Port parameters
92 * @port_node: List node for Master or Slave port_list
93 *
94 * SoundWire spec has no mention of ports for Master interface but the
95 * concept is logically extended.
96 */
97 struct sdw_port_runtime {
98 int num;
99 int ch_mask;
100 struct sdw_transport_params transport_params;
101 struct sdw_port_params port_params;
102 struct list_head port_node;
103 };
104
105 /**
106 * sdw_slave_runtime: Runtime Stream parameters for Slave
107 *
108 * @slave: Slave handle
109 * @direction: Data direction for Slave
110 * @ch_count: Number of channels handled by the Slave for
111 * this stream
112 * @m_rt_node: sdw_master_runtime list node
113 * @port_list: List of Slave Ports configured for this stream
114 */
115 struct sdw_slave_runtime {
116 struct sdw_slave *slave;
117 enum sdw_data_direction direction;
118 unsigned int ch_count;
119 struct list_head m_rt_node;
120 struct list_head port_list;
121 };
122
123 /**
124 * sdw_master_runtime: Runtime stream parameters for Master
125 *
126 * @bus: Bus handle
127 * @stream: Stream runtime handle
128 * @direction: Data direction for Master
129 * @ch_count: Number of channels handled by the Master for
130 * this stream, can be zero.
131 * @slave_rt_list: Slave runtime list
132 * @port_list: List of Master Ports configured for this stream, can be zero.
133 * @stream_node: sdw_stream_runtime master_list node
134 * @bus_node: sdw_bus m_rt_list node
135 */
136 struct sdw_master_runtime {
137 struct sdw_bus *bus;
138 struct sdw_stream_runtime *stream;
139 enum sdw_data_direction direction;
140 unsigned int ch_count;
141 struct list_head slave_rt_list;
142 struct list_head port_list;
143 struct list_head stream_node;
144 struct list_head bus_node;
145 };
146
147 struct sdw_transport_data {
148 int hstart;
149 int hstop;
150 int block_offset;
151 int sub_block_offset;
152 };
153
154 struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave,
155 enum sdw_data_direction direction,
156 unsigned int port_num);
157 int sdw_configure_dpn_intr(struct sdw_slave *slave, int port,
158 bool enable, int mask);
159
160 int sdw_transfer(struct sdw_bus *bus, struct sdw_msg *msg);
161 int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg);
162
163 #define SDW_READ_INTR_CLEAR_RETRY 10
164
165 int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave,
166 u32 addr, size_t count, u16 dev_num, u8 flags, u8 *buf);
167
168 /* Fill transport parameter data structure */
sdw_fill_xport_params(struct sdw_transport_params * params,int port_num,bool grp_ctrl_valid,int grp_ctrl,int sample_int,int off1,int off2,int hstart,int hstop,int pack_mode,int lane_ctrl)169 static inline void sdw_fill_xport_params(struct sdw_transport_params *params,
170 int port_num, bool grp_ctrl_valid,
171 int grp_ctrl, int sample_int,
172 int off1, int off2,
173 int hstart, int hstop,
174 int pack_mode, int lane_ctrl)
175 {
176 params->port_num = port_num;
177 params->blk_grp_ctrl_valid = grp_ctrl_valid;
178 params->blk_grp_ctrl = grp_ctrl;
179 params->sample_interval = sample_int;
180 params->offset1 = off1;
181 params->offset2 = off2;
182 params->hstart = hstart;
183 params->hstop = hstop;
184 params->blk_pkg_mode = pack_mode;
185 params->lane_ctrl = lane_ctrl;
186 }
187
188 /* Fill port parameter data structure */
sdw_fill_port_params(struct sdw_port_params * params,int port_num,int bps,int flow_mode,int data_mode)189 static inline void sdw_fill_port_params(struct sdw_port_params *params,
190 int port_num, int bps,
191 int flow_mode, int data_mode)
192 {
193 params->num = port_num;
194 params->bps = bps;
195 params->flow_mode = flow_mode;
196 params->data_mode = data_mode;
197 }
198
199 /* broadcast read/write for tests */
200 int sdw_bread_no_pm_unlocked(struct sdw_bus *bus, u16 dev_num, u32 addr);
201 int sdw_bwrite_no_pm_unlocked(struct sdw_bus *bus, u16 dev_num, u32 addr, u8 value);
202
203 /*
204 * At the moment we only track Master-initiated hw_reset.
205 * Additional fields can be added as needed
206 */
207 #define SDW_UNATTACH_REQUEST_MASTER_RESET BIT(0)
208
209 void sdw_clear_slave_status(struct sdw_bus *bus, u32 request);
210 int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size);
211 void sdw_compute_slave_ports(struct sdw_master_runtime *m_rt,
212 struct sdw_transport_data *t_data);
213
214 #endif /* __SDW_BUS_H */
215