1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3     saa7115.h - definition for saa7111/3/4/5 inputs and frequency flags
4 
5     Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
6 
7 */
8 
9 #ifndef _SAA7115_H_
10 #define _SAA7115_H_
11 
12 /* s_routing inputs, outputs, and config */
13 
14 /* SAA7111/3/4/5 HW inputs */
15 #define SAA7115_COMPOSITE0 0
16 #define SAA7115_COMPOSITE1 1
17 #define SAA7115_COMPOSITE2 2
18 #define SAA7115_COMPOSITE3 3
19 #define SAA7115_COMPOSITE4 4 /* not available for the saa7111/3 */
20 #define SAA7115_COMPOSITE5 5 /* not available for the saa7111/3 */
21 #define SAA7115_SVIDEO0    6
22 #define SAA7115_SVIDEO1    7
23 #define SAA7115_SVIDEO2    8
24 #define SAA7115_SVIDEO3    9
25 
26 /* outputs */
27 #define SAA7115_IPORT_ON	1
28 #define SAA7115_IPORT_OFF	0
29 
30 /* SAA7111 specific outputs. */
31 #define SAA7111_VBI_BYPASS	2
32 #define SAA7111_FMT_YUV422      0x00
33 #define SAA7111_FMT_RGB		0x40
34 #define SAA7111_FMT_CCIR	0x80
35 #define SAA7111_FMT_YUV411	0xc0
36 
37 /* config flags */
38 /*
39  * Register 0x85 should set bit 0 to 0 (it's 1 by default). This bit
40  * controls the IDQ signal polarity which is set to 'inverted' if the bit
41  * it 1 and to 'default' if it is 0.
42  */
43 #define SAA7115_IDQ_IS_DEFAULT  (1 << 0)
44 
45 /* s_crystal_freq values and flags */
46 
47 /* SAA7115 v4l2_crystal_freq frequency values */
48 #define SAA7115_FREQ_32_11_MHZ  32110000   /* 32.11 MHz crystal, SAA7114/5 only */
49 #define SAA7115_FREQ_24_576_MHZ 24576000   /* 24.576 MHz crystal */
50 
51 /* SAA7115 v4l2_crystal_freq audio clock control flags */
52 #define SAA7115_FREQ_FL_UCGC         (1 << 0) /* SA 3A[7], UCGC, SAA7115 only */
53 #define SAA7115_FREQ_FL_CGCDIV       (1 << 1) /* SA 3A[6], CGCDIV, SAA7115 only */
54 #define SAA7115_FREQ_FL_APLL         (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */
55 #define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5 only */
56 
57 /* ===== SAA7113 Config enums ===== */
58 
59 /* Register 0x08 "Horizontal time constant" [Bit 3..4]:
60  * Should be set to "Fast Locking Mode" according to the datasheet,
61  * and that is the default setting in the gm7113c_init table.
62  * saa7113_init sets this value to "VTR Mode". */
63 enum saa7113_r08_htc {
64 	SAA7113_HTC_TV_MODE = 0x00,
65 	SAA7113_HTC_VTR_MODE,			/* Default for saa7113_init */
66 	SAA7113_HTC_FAST_LOCKING_MODE = 0x03	/* Default for gm7113c_init */
67 };
68 
69 /* Register 0x10 "Output format selection" [Bit 6..7]:
70  * Defaults to ITU_656 as specified in datasheet. */
71 enum saa7113_r10_ofts {
72 	SAA7113_OFTS_ITU_656 = 0x0,	/* Default */
73 	SAA7113_OFTS_VFLAG_BY_VREF,
74 	SAA7113_OFTS_VFLAG_BY_DATA_TYPE
75 };
76 
77 /*
78  * Register 0x12 "Output control" [Bit 0..3 Or Bit 4..7]:
79  * This is used to select what data is output on the RTS0 and RTS1 pins.
80  * RTS1 [Bit 4..7] Defaults to DOT_IN. (This value can not be set for RTS0)
81  * RTS0 [Bit 0..3] Defaults to VIPB in gm7113c_init as specified
82  * in the datasheet, but is set to HREF_HS in the saa7113_init table.
83  */
84 enum saa7113_r12_rts {
85 	SAA7113_RTS_DOT_IN = 0,		/* OBS: Only for RTS1 (Default RTS1) */
86 	SAA7113_RTS_VIPB,		/* Default RTS0 For gm7113c_init */
87 	SAA7113_RTS_GPSW,
88 	SAA7115_RTS_HL,
89 	SAA7113_RTS_VL,
90 	SAA7113_RTS_DL,
91 	SAA7113_RTS_PLIN,
92 	SAA7113_RTS_HREF_HS,		/* Default RTS0 For saa7113_init */
93 	SAA7113_RTS_HS,
94 	SAA7113_RTS_HQ,
95 	SAA7113_RTS_ODD,
96 	SAA7113_RTS_VS,
97 	SAA7113_RTS_V123,
98 	SAA7113_RTS_VGATE,
99 	SAA7113_RTS_VREF,
100 	SAA7113_RTS_FID
101 };
102 
103 /**
104  * struct saa7115_platform_data - Allow overriding default initialization
105  *
106  * @saa7113_force_gm7113c_init:	Force the use of the gm7113c_init table
107  *				instead of saa7113_init table
108  *				(saa7113 only)
109  * @saa7113_r08_htc:		[R_08 - Bit 3..4]
110  * @saa7113_r10_vrln:		[R_10 - Bit 3]
111  *				default: Disabled for gm7113c_init
112  *					 Enabled for saa7113c_init
113  * @saa7113_r10_ofts:		[R_10 - Bit 6..7]
114  * @saa7113_r12_rts0:		[R_12 - Bit 0..3]
115  * @saa7113_r12_rts1:		[R_12 - Bit 4..7]
116  * @saa7113_r13_adlsb:		[R_13 - Bit 7] - default: disabled
117  */
118 struct saa7115_platform_data {
119 	bool saa7113_force_gm7113c_init;
120 	enum saa7113_r08_htc *saa7113_r08_htc;
121 	bool *saa7113_r10_vrln;
122 	enum saa7113_r10_ofts *saa7113_r10_ofts;
123 	enum saa7113_r12_rts *saa7113_r12_rts0;
124 	enum saa7113_r12_rts *saa7113_r12_rts1;
125 	bool *saa7113_r13_adlsb;
126 };
127 
128 #endif
129