1 #ifndef _PPC64_PTRACE_H
2 #define _PPC64_PTRACE_H
3 
4 /*
5  * Copyright (C) 2001 PPC64 Team, IBM Corp
6  *
7  * This struct defines the way the registers are stored on the
8  * kernel stack during a system call or other kernel entry.
9  *
10  * this should only contain volatile regs
11  * since we can keep non-volatile in the thread_struct
12  * should set this up when only volatiles are saved
13  * by intr code.
14  *
15  * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
16  * that the overall structure is a multiple of 16 bytes in length.
17  *
18  * Note that the offsets of the fields in this struct correspond with
19  * the PT_* values below.  This simplifies arch/ppc64/kernel/ptrace.c.
20  *
21  * This program is free software; you can redistribute it and/or
22  * modify it under the terms of the GNU General Public License
23  * as published by the Free Software Foundation; either version
24  * 2 of the License, or (at your option) any later version.
25  */
26 
27 #define INIT_TASK_SIZE			4*PAGE_SIZE
28 
29 #ifndef __ASSEMBLY__
30 #define PPC_REG unsigned long
31 struct pt_regs {
32 	PPC_REG gpr[32];
33 	PPC_REG nip;
34 	PPC_REG msr;
35 	PPC_REG orig_gpr3;	/* Used for restarting system calls */
36 	PPC_REG ctr;
37 	PPC_REG link;
38 	PPC_REG xer;
39 	PPC_REG ccr;
40 	PPC_REG softe;		/* Soft enabled/disabled */
41 	PPC_REG trap;		/* Reason for being here */
42 	PPC_REG dar;		/* Fault registers */
43 	PPC_REG dsisr;
44 	PPC_REG result; 	/* Result of a system call */
45 };
46 
47 #define PPC_REG_32 unsigned int
48 struct pt_regs32 {
49 	PPC_REG_32 gpr[32];
50 	PPC_REG_32 nip;
51 	PPC_REG_32 msr;
52 	PPC_REG_32 orig_gpr3;	/* Used for restarting system calls */
53 	PPC_REG_32 ctr;
54 	PPC_REG_32 link;
55 	PPC_REG_32 xer;
56 	PPC_REG_32 ccr;
57 	PPC_REG_32 mq;		/* 601 only (not used at present) */
58 				/* Used on APUS to hold IPL value. */
59 	PPC_REG_32 trap;		/* Reason for being here */
60 	PPC_REG_32 dar;		/* Fault registers */
61 	PPC_REG_32 dsisr;
62 	PPC_REG_32 result; 	/* Result of a system call */
63 };
64 
65 #endif
66 
67 #define STACK_FRAME_OVERHEAD	112	/* size of minimum stack frame */
68 
69 /*
70  * Size of dummy stack frame allocated when calling signal handler.
71  * These *MUST* be multiples of 16 since the ABI requires stack frames
72  * be quadword aligned.
73  */
74 #define __SIGNAL_FRAMESIZE	128
75 #define __SIGNAL_FRAMESIZE32	64
76 
77 #define instruction_pointer(regs) ((regs)->nip)
78 #define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
79 
80 /*
81  * Offsets used by 'ptrace' system call interface.
82  */
83 #define PT_R0	0
84 #define PT_R1	1
85 #define PT_R2	2
86 #define PT_R3	3
87 #define PT_R4	4
88 #define PT_R5	5
89 #define PT_R6	6
90 #define PT_R7	7
91 #define PT_R8	8
92 #define PT_R9	9
93 #define PT_R10	10
94 #define PT_R11	11
95 #define PT_R12	12
96 #define PT_R13	13
97 #define PT_R14	14
98 #define PT_R15	15
99 #define PT_R16	16
100 #define PT_R17	17
101 #define PT_R18	18
102 #define PT_R19	19
103 #define PT_R20	20
104 #define PT_R21	21
105 #define PT_R22	22
106 #define PT_R23	23
107 #define PT_R24	24
108 #define PT_R25	25
109 #define PT_R26	26
110 #define PT_R27	27
111 #define PT_R28	28
112 #define PT_R29	29
113 #define PT_R30	30
114 #define PT_R31	31
115 
116 #define PT_NIP	32
117 #define PT_MSR	33
118 #ifdef __KERNEL__
119 #define PT_ORIG_R3 34
120 #endif
121 #define PT_CTR	35
122 #define PT_LNK	36
123 #define PT_XER	37
124 #define PT_CCR	38
125 #define PT_SOFTE 39
126 #define PT_RESULT 43
127 
128 #define PT_FPR0	48
129 
130 /* Kernel and userspace will both use this PT_FPSCR value.  32-bit apps will have
131  * visibility to the asm-ppc/ptrace.h header instead of this one.
132  */
133 #define PT_FPSCR (PT_FPR0 + 32)	  /* each FP reg occupies 1 slot in 64-bit space */
134 
135 #ifdef __KERNEL__
136 #define PT_FPSCR32 (PT_FPR0 + 2*32 + 1)	  /* each FP reg occupies 2 32-bit userspace slots */
137 #endif
138 
139 /* Additional PTRACE requests implemented on PowerPC. */
140 #define PPC_PTRACE_GETREGS	      0x99  /* Get GPRs 0 - 31 */
141 #define PPC_PTRACE_SETREGS	      0x98  /* Set GPRs 0 - 31 */
142 #define PPC_PTRACE_GETFPREGS	    0x97  /* Get FPRs 0 - 31 */
143 #define PPC_PTRACE_SETFPREGS	    0x96  /* Set FPRs 0 - 31 */
144 #define PPC_PTRACE_PEEKTEXT_3264  0x95  /* Read word at location ADDR on a 64-bit process from a 32-bit process. */
145 #define PPC_PTRACE_PEEKDATA_3264  0x94  /* Read word at location ADDR on a 64-bit process from a 32-bit process. */
146 #define PPC_PTRACE_POKETEXT_3264  0x93  /* Write word at location ADDR on a 64-bit process from a 32-bit process. */
147 #define PPC_PTRACE_POKEDATA_3264  0x92  /* Write word at location ADDR on a 64-bit process from a 32-bit process. */
148 #define PPC_PTRACE_PEEKUSR_3264   0x91  /* Read a register (specified by ADDR) out of the "user area" on a 64-bit process from a 32-bit process. */
149 #define PPC_PTRACE_POKEUSR_3264   0x90  /* Write DATA into location ADDR within the "user area" on a 64-bit process from a 32-bit process. */
150 
151 /* Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go */
152 #define PTRACE_GETVRREGS	18
153 #define PTRACE_SETVRREGS	19
154 
155 #endif /* _PPC64_PTRACE_H */
156