1 /* SPDX-License-Identifier: GPL-2.0 */
2 /* Primary function overlay window definitions
3  * and service functions used by LPDDR chips
4  */
5 #ifndef __LINUX_MTD_PFOW_H
6 #define __LINUX_MTD_PFOW_H
7 
8 #include <linux/mtd/qinfo.h>
9 
10 /* PFOW registers addressing */
11 /* Address of symbol "P" */
12 #define PFOW_QUERY_STRING_P			0x0000
13 /* Address of symbol "F" */
14 #define PFOW_QUERY_STRING_F			0x0002
15 /* Address of symbol "O" */
16 #define PFOW_QUERY_STRING_O			0x0004
17 /* Address of symbol "W" */
18 #define PFOW_QUERY_STRING_W			0x0006
19 /* Identification info for LPDDR chip */
20 #define PFOW_MANUFACTURER_ID			0x0020
21 #define PFOW_DEVICE_ID				0x0022
22 /* Address in PFOW where prog buffer can be found */
23 #define PFOW_PROGRAM_BUFFER_OFFSET		0x0040
24 /* Size of program buffer in words */
25 #define PFOW_PROGRAM_BUFFER_SIZE		0x0042
26 /* Address command code register */
27 #define PFOW_COMMAND_CODE			0x0080
28 /* command data register */
29 #define PFOW_COMMAND_DATA			0x0084
30 /* command address register lower address bits */
31 #define PFOW_COMMAND_ADDRESS_L			0x0088
32 /* command address register upper address bits */
33 #define PFOW_COMMAND_ADDRESS_H			0x008a
34 /* number of bytes to be proggrammed lower address bits */
35 #define PFOW_DATA_COUNT_L			0x0090
36 /* number of bytes to be proggrammed higher address bits */
37 #define PFOW_DATA_COUNT_H			0x0092
38 /* command execution register, the only possible value is 0x01 */
39 #define PFOW_COMMAND_EXECUTE			0x00c0
40 /* 0x01 should be written at this address to clear buffer */
41 #define PFOW_CLEAR_PROGRAM_BUFFER		0x00c4
42 /* device program/erase suspend register */
43 #define PFOW_PROGRAM_ERASE_SUSPEND		0x00c8
44 /* device status register */
45 #define PFOW_DSR				0x00cc
46 
47 /* LPDDR memory device command codes */
48 /* They are possible values of PFOW command code register */
49 #define LPDDR_WORD_PROGRAM		0x0041
50 #define LPDDR_BUFF_PROGRAM		0x00E9
51 #define LPDDR_BLOCK_ERASE		0x0020
52 #define LPDDR_LOCK_BLOCK		0x0061
53 #define LPDDR_UNLOCK_BLOCK		0x0062
54 #define LPDDR_READ_BLOCK_LOCK_STATUS	0x0065
55 #define LPDDR_INFO_QUERY		0x0098
56 #define LPDDR_READ_OTP			0x0097
57 #define LPDDR_PROG_OTP			0x00C0
58 #define LPDDR_RESUME			0x00D0
59 
60 /* Defines possible value of PFOW command execution register */
61 #define LPDDR_START_EXECUTION			0x0001
62 
63 /* Defines possible value of PFOW program/erase suspend register */
64 #define LPDDR_SUSPEND				0x0001
65 
66 /* Possible values of PFOW device status register */
67 /* access R - read; RC read & clearable */
68 #define DSR_DPS			(1<<1) /* RC; device protect status
69 					* 0 - not protected 1 - locked */
70 #define DSR_PSS			(1<<2) /* R; program suspend status;
71 					* 0-prog in progress/completed,
72 					* 1- prog suspended */
73 #define DSR_VPPS		(1<<3) /* RC; 0-Vpp OK, * 1-Vpp low */
74 #define DSR_PROGRAM_STATUS	(1<<4) /* RC; 0-successful, 1-error */
75 #define DSR_ERASE_STATUS	(1<<5) /* RC; erase or blank check status;
76 					* 0-success erase/blank check,
77 					* 1 blank check error */
78 #define DSR_ESS			(1<<6) /* R; erase suspend status;
79 					* 0-erase in progress/complete,
80 					* 1 erase suspended */
81 #define DSR_READY_STATUS	(1<<7) /* R; Device status
82 					* 0-busy,
83 					* 1-ready */
84 #define DSR_RPS			(0x3<<8) /* RC;  region program status
85 					* 00 - Success,
86 					* 01-re-program attempt in region with
87 					* object mode data,
88 					* 10-object mode program w attempt in
89 					* region with control mode data
90 					* 11-attempt to program invalid half
91 					* with 0x41 command */
92 #define DSR_AOS			(1<<12) /* RC; 1- AO related failure */
93 #define DSR_AVAILABLE		(1<<15) /* R; Device availbility
94 					* 1 - Device available
95 					* 0 - not available */
96 
97 /* The superset of all possible error bits in DSR */
98 #define DSR_ERR			0x133A
99 
send_pfow_command(struct map_info * map,unsigned long cmd_code,unsigned long adr,unsigned long len,map_word * datum)100 static inline void send_pfow_command(struct map_info *map,
101 				unsigned long cmd_code, unsigned long adr,
102 				unsigned long len, map_word *datum)
103 {
104 	int bits_per_chip = map_bankwidth(map) * 8;
105 
106 	map_write(map, CMD(cmd_code), map->pfow_base + PFOW_COMMAND_CODE);
107 	map_write(map, CMD(adr & ((1<<bits_per_chip) - 1)),
108 				map->pfow_base + PFOW_COMMAND_ADDRESS_L);
109 	map_write(map, CMD(adr>>bits_per_chip),
110 				map->pfow_base + PFOW_COMMAND_ADDRESS_H);
111 	if (len) {
112 		map_write(map, CMD(len & ((1<<bits_per_chip) - 1)),
113 					map->pfow_base + PFOW_DATA_COUNT_L);
114 		map_write(map, CMD(len>>bits_per_chip),
115 					map->pfow_base + PFOW_DATA_COUNT_H);
116 	}
117 	if (datum)
118 		map_write(map, *datum, map->pfow_base + PFOW_COMMAND_DATA);
119 
120 	/* Command execution start */
121 	map_write(map, CMD(LPDDR_START_EXECUTION),
122 			map->pfow_base + PFOW_COMMAND_EXECUTE);
123 }
124 #endif /* __LINUX_MTD_PFOW_H */
125