1 /*
2  *  linux/drivers/message/fusion/mptioctl.h
3  *      Fusion MPT misc device (ioctl) driver.
4  *      For use with PCI chip/adapter(s):
5  *          LSIFC9xx/LSI409xx Fibre Channel
6  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
7  *
8  *  Credits:
9  *      This driver would not exist if not for Alan Cox's development
10  *      of the linux i2o driver.
11  *
12  *      A huge debt of gratitude is owed to David S. Miller (DaveM)
13  *      for fixing much of the stupid and broken stuff in the early
14  *      driver while porting to sparc64 platform.  THANK YOU!
15  *
16  *      (see also mptbase.c)
17  *
18  *  Copyright (c) 1999-2004 LSI Logic Corporation
19  *  Originally By: Steven J. Ralston
20  *  (mailto:sjralston1@netscape.net)
21  *  (mailto:mpt_linux_developer@lsil.com)
22  *
23  *  $Id: mptctl.h,v 1.14 2003/03/18 22:49:51 pdelaney Exp $
24  */
25 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
26 /*
27     This program is free software; you can redistribute it and/or modify
28     it under the terms of the GNU General Public License as published by
29     the Free Software Foundation; version 2 of the License.
30 
31     This program is distributed in the hope that it will be useful,
32     but WITHOUT ANY WARRANTY; without even the implied warranty of
33     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
34     GNU General Public License for more details.
35 
36     NO WARRANTY
37     THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
38     CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
39     LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
40     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
41     solely responsible for determining the appropriateness of using and
42     distributing the Program and assumes all risks associated with its
43     exercise of rights under this Agreement, including but not limited to
44     the risks and costs of program errors, damage to or loss of data,
45     programs or equipment, and unavailability or interruption of operations.
46 
47     DISCLAIMER OF LIABILITY
48     NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
49     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
50     DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
51     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
52     TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
53     USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
54     HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
55 
56     You should have received a copy of the GNU General Public License
57     along with this program; if not, write to the Free Software
58     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
59 */
60 
61 #ifndef MPTCTL_H_INCLUDED
62 #define MPTCTL_H_INCLUDED
63 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
64 
65 #include "linux/version.h"
66 
67 
68 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
69 /*
70  *
71  */
72 #define MPT_MISCDEV_BASENAME            "mptctl"
73 #define MPT_MISCDEV_PATHNAME            "/dev/" MPT_MISCDEV_BASENAME
74 
75 #define MPT_PRODUCT_LENGTH              12
76 
77 /*
78  *  Generic MPT Control IOCTLs and structures
79  */
80 #define MPT_MAGIC_NUMBER	'm'
81 
82 #define MPTRWPERF		_IOWR(MPT_MAGIC_NUMBER,0,struct mpt_raw_r_w)
83 
84 #define MPTFWDOWNLOAD		_IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer)
85 #define MPTCOMMAND		_IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command)
86 
87 #if defined(__KERNEL__) && defined(MPT_CONFIG_COMPAT)
88 #define MPTFWDOWNLOAD32		_IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer32)
89 #define MPTCOMMAND32		_IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command32)
90 #endif
91 
92 #define MPTIOCINFO		_IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo)
93 #define MPTIOCINFO1		_IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev0)
94 #define MPTTARGETINFO		_IOWR(MPT_MAGIC_NUMBER,18,struct mpt_ioctl_targetinfo)
95 #define MPTTEST			_IOWR(MPT_MAGIC_NUMBER,19,struct mpt_ioctl_test)
96 #define MPTEVENTQUERY		_IOWR(MPT_MAGIC_NUMBER,21,struct mpt_ioctl_eventquery)
97 #define MPTEVENTENABLE		_IOWR(MPT_MAGIC_NUMBER,22,struct mpt_ioctl_eventenable)
98 #define MPTEVENTREPORT		_IOWR(MPT_MAGIC_NUMBER,23,struct mpt_ioctl_eventreport)
99 #define MPTHARDRESET		_IOWR(MPT_MAGIC_NUMBER,24,struct mpt_ioctl_diag_reset)
100 #define MPTFWREPLACE		_IOWR(MPT_MAGIC_NUMBER,25,struct mpt_ioctl_replace_fw)
101 
102 /*
103  * SPARC PLATFORM REMARKS:
104  * IOCTL data structures that contain pointers
105  * will have different sizes in the driver and applications
106  * (as the app. will not use 8-byte pointers).
107  * Apps should use MPTFWDOWNLOAD and MPTCOMMAND.
108  * The driver will convert data from
109  * mpt_fw_xfer32 (mpt_ioctl_command32) to mpt_fw_xfer (mpt_ioctl_command)
110  * internally.
111  *
112  * If data structures change size, must handle as in IOCGETINFO.
113  */
114 struct mpt_fw_xfer {
115 	unsigned int	 iocnum;	/* IOC unit number */
116 	unsigned int	 fwlen;
117 	void		*bufp;		/* Pointer to firmware buffer */
118 };
119 
120 #if defined(__KERNEL__) && defined(MPT_CONFIG_COMPAT)
121 struct mpt_fw_xfer32 {
122 	unsigned int iocnum;
123 	unsigned int fwlen;
124 	u32 bufp;
125 };
126 #endif
127 
128 /*
129  *  IOCTL header structure.
130  *  iocnum - must be defined.
131  *  port - must be defined for all IOCTL commands other than MPTIOCINFO
132  *  maxDataSize - ignored on MPTCOMMAND commands
133  *		- ignored on MPTFWREPLACE commands
134  *		- on query commands, reports the maximum number of bytes to be returned
135  *		  to the host driver (count includes the header).
136  *		  That is, set to sizeof(struct mpt_ioctl_iocinfo) for fixed sized commands.
137  *		  Set to sizeof(struct mpt_ioctl_targetinfo) + datasize for variable
138  *			sized commands. (MPTTARGETINFO, MPTEVENTREPORT)
139  */
140 typedef struct _mpt_ioctl_header {
141 	unsigned int	 iocnum;	/* IOC unit number */
142 	unsigned int	 port;		/* IOC port number */
143 	int		 maxDataSize;	/* Maximum Num. bytes to transfer on read */
144 } mpt_ioctl_header;
145 
146 /*
147  * Issue a diagnostic reset
148  */
149 struct mpt_ioctl_diag_reset {
150 	mpt_ioctl_header hdr;
151 };
152 
153 
154 /*
155  *  PCI bus/device/function information structure.
156  */
157 struct mpt_ioctl_pci_info {
158 	union {
159 		struct {
160 			unsigned int  deviceNumber   :  5;
161 			unsigned int  functionNumber :  3;
162 			unsigned int  busNumber      : 24;
163 		} bits;
164 		unsigned int  asUlong;
165 	} u;
166 };
167 
168 /*
169  *  Adapter Information Page
170  *  Read only.
171  *  Data starts at offset 0xC
172  */
173 #define MPT_IOCTL_INTERFACE_FC		(0x01)
174 #define MPT_IOCTL_INTERFACE_SCSI	(0x00)
175 #define MPT_IOCTL_VERSION_LENGTH	(32)
176 
177 struct mpt_ioctl_iocinfo {
178 	mpt_ioctl_header hdr;
179 	int		 adapterType;	/* SCSI or FCP */
180 	int		 port;		/* port number */
181 	int		 pciId;		/* PCI Id. */
182 	int		 hwRev;		/* hardware revision */
183 	int		 subSystemDevice;	/* PCI subsystem Device ID */
184 	int		 subSystemVendor;	/* PCI subsystem Vendor ID */
185 	int		 numDevices;		/* number of devices */
186 	int		 FWVersion;		/* FW Version (integer) */
187 	int		 BIOSVersion;		/* BIOS Version (integer) */
188 	char		 driverVersion[MPT_IOCTL_VERSION_LENGTH];	/* Driver Version (string) */
189 	char		 busChangeEvent;
190 	char		 hostId;
191 	char		 rsvd[2];
192 	struct mpt_ioctl_pci_info  pciInfo; /* Added Rev 1 */
193 };
194 
195 /* Original structure, must always accept these
196  * IOCTLs. 4 byte pads can occur based on arch with
197  * above structure. Wish to re-align, but cannot.
198  */
199 struct mpt_ioctl_iocinfo_rev0 {
200 	mpt_ioctl_header hdr;
201 	int		 adapterType;	/* SCSI or FCP */
202 	int		 port;		/* port number */
203 	int		 pciId;		/* PCI Id. */
204 	int		 hwRev;		/* hardware revision */
205 	int		 subSystemDevice;	/* PCI subsystem Device ID */
206 	int		 subSystemVendor;	/* PCI subsystem Vendor ID */
207 	int		 numDevices;		/* number of devices */
208 	int		 FWVersion;		/* FW Version (integer) */
209 	int		 BIOSVersion;		/* BIOS Version (integer) */
210 	char		 driverVersion[MPT_IOCTL_VERSION_LENGTH];	/* Driver Version (string) */
211 	char		 busChangeEvent;
212 	char		 hostId;
213 	char		 rsvd[2];
214 };
215 
216 /*
217  * Device Information Page
218  * Report the number of, and ids of, all targets
219  * on this IOC.  The ids array is a packed structure
220  * of the known targetInfo.
221  * bits 31-24: reserved
222  *      23-16: LUN
223  *      15- 8: Bus Number
224  *       7- 0: Target ID
225  */
226 struct mpt_ioctl_targetinfo {
227 	mpt_ioctl_header hdr;
228 	int		 numDevices;	/* Num targets on this ioc */
229 	int		 targetInfo[1];
230 };
231 
232 
233 /*
234  * Event reporting IOCTL's.  These IOCTL's will
235  * use the following defines:
236  */
237 struct mpt_ioctl_eventquery {
238 	mpt_ioctl_header hdr;
239 	unsigned short	 eventEntries;
240 	unsigned short	 reserved;
241 	unsigned int	 eventTypes;
242 };
243 
244 struct mpt_ioctl_eventenable {
245 	mpt_ioctl_header hdr;
246 	unsigned int	 eventTypes;
247 };
248 
249 #ifndef __KERNEL__
250 typedef struct {
251 	uint	event;
252 	uint	eventContext;
253 	uint	data[2];
254 } MPT_IOCTL_EVENTS;
255 #endif
256 
257 struct mpt_ioctl_eventreport {
258 	mpt_ioctl_header	hdr;
259 	MPT_IOCTL_EVENTS	eventData[1];
260 };
261 
262 #define MPT_MAX_NAME	32
263 struct mpt_ioctl_test {
264 	mpt_ioctl_header hdr;
265 	u8		 name[MPT_MAX_NAME];
266 	int		 chip_type;
267 	u8		 product [MPT_PRODUCT_LENGTH];
268 };
269 
270 /* Replace the FW image cached in host driver memory
271  * newImageSize - image size in bytes
272  * newImage - first byte of the new image
273  */
274 typedef struct mpt_ioctl_replace_fw {
275 	mpt_ioctl_header hdr;
276 	int		 newImageSize;
277 	u8		 newImage[1];
278 } mpt_ioctl_replace_fw_t;
279 
280 /* General MPT Pass through data strucutre
281  *
282  * iocnum
283  * timeout - in seconds, command timeout. If 0, set by driver to
284  *		default value.
285  * replyFrameBufPtr - reply location
286  * dataInBufPtr - destination for read
287  * dataOutBufPtr - data source for write
288  * senseDataPtr - sense data location
289  * maxReplyBytes - maximum number of reply bytes to be sent to app.
290  * dataInSize - num bytes for data transfer in (read)
291  * dataOutSize - num bytes for data transfer out (write)
292  * dataSgeOffset - offset in words from the start of the request message
293  *		to the first SGL
294  * MF[1];
295  *
296  * Remark:  Some config pages have bi-directional transfer,
297  * both a read and a write. The basic structure allows for
298  * a bidirectional set up. Normal messages will have one or
299  * both of these buffers NULL.
300  */
301 struct mpt_ioctl_command {
302 	mpt_ioctl_header hdr;
303 	int		timeout;	/* optional (seconds) */
304 	char		*replyFrameBufPtr;
305 	char		*dataInBufPtr;
306 	char		*dataOutBufPtr;
307 	char		*senseDataPtr;
308 	int		maxReplyBytes;
309 	int		dataInSize;
310 	int		dataOutSize;
311 	int		maxSenseBytes;
312 	int		dataSgeOffset;
313 	char		MF[1];
314 };
315 
316 /*
317  * SPARC PLATFORM: See earlier remark.
318  */
319 #if defined(__KERNEL__) && defined(MPT_CONFIG_COMPAT)
320 struct mpt_ioctl_command32 {
321 	mpt_ioctl_header hdr;
322 	int	timeout;
323 	u32	replyFrameBufPtr;
324 	u32	dataInBufPtr;
325 	u32	dataOutBufPtr;
326 	u32	senseDataPtr;
327 	int	maxReplyBytes;
328 	int	dataInSize;
329 	int	dataOutSize;
330 	int	maxSenseBytes;
331 	int	dataSgeOffset;
332 	char	MF[1];
333 };
334 #endif
335 
336 
337 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
338 /*
339  *	HP Specific IOCTL Defines and Structures
340  */
341 
342 #define CPQFCTS_IOC_MAGIC 'Z'
343 #define HP_IOC_MAGIC 'Z'
344 #define HP_GETHOSTINFO		_IOR(HP_IOC_MAGIC, 20, hp_host_info_t)
345 #define HP_GETHOSTINFO1		_IOR(HP_IOC_MAGIC, 20, hp_host_info_rev0_t)
346 #define HP_GETTARGETINFO	_IOR(HP_IOC_MAGIC, 21, hp_target_info_t)
347 
348 /* All HP IOCTLs must include this header
349  */
350 typedef struct _hp_header {
351 	unsigned int iocnum;
352 	unsigned int host;
353 	unsigned int channel;
354 	unsigned int id;
355 	unsigned int lun;
356 } hp_header_t;
357 
358 /*
359  *  Header:
360  *  iocnum 	required (input)
361  *  host 	ignored
362  *  channe	ignored
363  *  id		ignored
364  *  lun		ignored
365  */
366 typedef struct _hp_host_info {
367 	hp_header_t	 hdr;
368 	u16		 vendor;
369 	u16		 device;
370 	u16		 subsystem_vendor;
371 	u16		 subsystem_id;
372 	u8		 devfn;
373 	u8		 bus;
374 	ushort		 host_no;		/* SCSI Host number, if scsi driver not loaded*/
375 	u8		 fw_version[16];	/* string */
376 	u8		 serial_number[24];	/* string */
377 	u32		 ioc_status;
378 	u32		 bus_phys_width;
379 	u32		 base_io_addr;
380 	u32		 rsvd;
381 	unsigned int	 hard_resets;		/* driver initiated resets */
382 	unsigned int	 soft_resets;		/* ioc, external resets */
383 	unsigned int	 timeouts;		/* num timeouts */
384 } hp_host_info_t;
385 
386 /* replace ulongs with uints, need to preserve backwards
387  * compatibility.
388  */
389 typedef struct _hp_host_info_rev0 {
390 	hp_header_t	 hdr;
391 	u16		 vendor;
392 	u16		 device;
393 	u16		 subsystem_vendor;
394 	u16		 subsystem_id;
395 	u8		 devfn;
396 	u8		 bus;
397 	ushort		 host_no;		/* SCSI Host number, if scsi driver not loaded*/
398 	u8		 fw_version[16];	/* string */
399 	u8		 serial_number[24];	/* string */
400 	u32		 ioc_status;
401 	u32		 bus_phys_width;
402 	u32		 base_io_addr;
403 	u32		 rsvd;
404 	unsigned long	 hard_resets;		/* driver initiated resets */
405 	unsigned long	 soft_resets;		/* ioc, external resets */
406 	unsigned long	 timeouts;		/* num timeouts */
407 } hp_host_info_rev0_t;
408 
409 /*
410  *  Header:
411  *  iocnum 	required (input)
412  *  host 	required
413  *  channel	required	(bus number)
414  *  id		required
415  *  lun		ignored
416  *
417  *  All error values between 0 and 0xFFFF in size.
418  */
419 typedef struct _hp_target_info {
420 	hp_header_t	 hdr;
421 	u32 parity_errors;
422 	u32 phase_errors;
423 	u32 select_timeouts;
424 	u32 message_rejects;
425 	u32 negotiated_speed;
426 	u8  negotiated_width;
427 	u8  rsvd[7];				/* 8 byte alignment */
428 } hp_target_info_t;
429 
430 #define HP_STATUS_OTHER		1
431 #define HP_STATUS_OK		2
432 #define HP_STATUS_FAILED	3
433 
434 #define HP_BUS_WIDTH_UNK	1
435 #define HP_BUS_WIDTH_8		2
436 #define HP_BUS_WIDTH_16		3
437 #define HP_BUS_WIDTH_32		4
438 
439 #define HP_DEV_SPEED_ASYNC	2
440 #define HP_DEV_SPEED_FAST	3
441 #define HP_DEV_SPEED_ULTRA	4
442 #define HP_DEV_SPEED_ULTRA2	5
443 #define HP_DEV_SPEED_ULTRA160	6
444 #define HP_DEV_SPEED_SCSI1	7
445 #define HP_DEV_SPEED_ULTRA320	8
446 
447 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
448 
449 
450 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
451 
452 #endif
453 
454