1 /*
2 * linux/mdio.h: definitions for MDIO (clause 45) transceivers
3 * Copyright 2006-2009 Solarflare Communications Inc.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 as published
7 * by the Free Software Foundation, incorporated herein by reference.
8 */
9
10 #ifndef __LINUX_MDIO_H__
11 #define __LINUX_MDIO_H__
12
13 #include <linux/types.h>
14 #include <linux/mii.h>
15
16 /* MDIO Manageable Devices (MMDs). */
17 #define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/
18 * Physical Medium Dependent */
19 #define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */
20 #define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */
21 #define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */
22 #define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */
23 #define MDIO_MMD_TC 6 /* Transmission Convergence */
24 #define MDIO_MMD_AN 7 /* Auto-Negotiation */
25 #define MDIO_MMD_C22EXT 29 /* Clause 22 extension */
26 #define MDIO_MMD_VEND1 30 /* Vendor specific 1 */
27 #define MDIO_MMD_VEND2 31 /* Vendor specific 2 */
28
29 /* Generic MDIO registers. */
30 #define MDIO_CTRL1 MII_BMCR
31 #define MDIO_STAT1 MII_BMSR
32 #define MDIO_DEVID1 MII_PHYSID1
33 #define MDIO_DEVID2 MII_PHYSID2
34 #define MDIO_SPEED 4 /* Speed ability */
35 #define MDIO_DEVS1 5 /* Devices in package */
36 #define MDIO_DEVS2 6
37 #define MDIO_CTRL2 7 /* 10G control 2 */
38 #define MDIO_STAT2 8 /* 10G status 2 */
39 #define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */
40 #define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */
41 #define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */
42 #define MDIO_PKGID1 14 /* Package identifier */
43 #define MDIO_PKGID2 15
44 #define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */
45 #define MDIO_AN_LPA 19 /* AN LP abilities (base page) */
46 #define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */
47
48 /* Media-dependent registers. */
49 #define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */
50 #define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */
51 #define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A.
52 * Lanes B-D are numbered 134-136. */
53 #define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */
54 #define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */
55 #define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */
56 #define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */
57 #define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */
58 #define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */
59 #define MDIO_AN_EEE_ADV 60 /* EEE advertisement */
60
61 /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
62 #define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */
63 #define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */
64 #define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */
65 #define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */
66 #define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */
67 #define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */
68
69 /* Control register 1. */
70 /* Enable extended speed selection */
71 #define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100)
72 /* All speed selection bits */
73 #define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c)
74 #define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX
75 #define MDIO_CTRL1_LPOWER BMCR_PDOWN
76 #define MDIO_CTRL1_RESET BMCR_RESET
77 #define MDIO_PMA_CTRL1_LOOPBACK 0x0001
78 #define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000
79 #define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100
80 #define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK
81 #define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK
82 #define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART
83 #define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE
84 #define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */
85
86 /* 10 Gb/s */
87 #define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00)
88 /* 10PASS-TS/2BASE-TL */
89 #define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04)
90
91 /* Status register 1. */
92 #define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */
93 #define MDIO_STAT1_LSTATUS BMSR_LSTATUS
94 #define MDIO_STAT1_FAULT 0x0080 /* Fault */
95 #define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */
96 #define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE
97 #define MDIO_AN_STAT1_RFAULT BMSR_RFAULT
98 #define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE
99 #define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */
100 #define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */
101
102 /* Speed register. */
103 #define MDIO_SPEED_10G 0x0001 /* 10G capable */
104 #define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */
105 #define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */
106 #define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */
107 #define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */
108 #define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */
109 #define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */
110
111 /* Device present registers. */
112 #define MDIO_DEVS_PRESENT(devad) (1 << (devad))
113 #define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
114 #define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
115 #define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
116 #define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
117 #define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
118 #define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC)
119 #define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN)
120 #define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
121
122 /* Control register 2. */
123 #define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */
124 #define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */
125 #define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */
126 #define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */
127 #define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */
128 #define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */
129 #define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */
130 #define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */
131 #define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */
132 #define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */
133 #define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */
134 #define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */
135 #define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */
136 #define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */
137 #define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */
138 #define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */
139 #define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */
140 #define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */
141 #define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */
142 #define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */
143 #define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */
144 #define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */
145
146 /* Status register 2. */
147 #define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */
148 #define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */
149 #define MDIO_STAT2_DEVPRST 0xc000 /* Device present */
150 #define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */
151 #define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */
152 #define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */
153 #define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */
154 #define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */
155 #define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */
156 #define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */
157 #define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */
158 #define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */
159 #define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */
160 #define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */
161 #define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
162 #define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
163 #define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */
164 #define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */
165 #define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */
166 #define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
167 #define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
168
169 /* Transmit disable register. */
170 #define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */
171 #define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */
172 #define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */
173 #define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */
174 #define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */
175
176 /* Receive signal detect register. */
177 #define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */
178 #define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */
179 #define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */
180 #define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */
181 #define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */
182
183 /* Extended abilities register. */
184 #define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */
185 #define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */
186 #define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */
187 #define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */
188 #define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */
189 #define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */
190 #define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */
191 #define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */
192 #define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */
193
194 /* PHY XGXS lane state register. */
195 #define MDIO_PHYXS_LNSTAT_SYNC0 0x0001
196 #define MDIO_PHYXS_LNSTAT_SYNC1 0x0002
197 #define MDIO_PHYXS_LNSTAT_SYNC2 0x0004
198 #define MDIO_PHYXS_LNSTAT_SYNC3 0x0008
199 #define MDIO_PHYXS_LNSTAT_ALIGN 0x1000
200
201 /* PMA 10GBASE-T pair swap & polarity */
202 #define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */
203 #define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */
204 #define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */
205 #define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */
206 #define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */
207 #define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */
208
209 /* PMA 10GBASE-T TX power register. */
210 #define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */
211
212 /* PMA 10GBASE-T SNR registers. */
213 /* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
214 #define MDIO_PMA_10GBT_SNR_BIAS 0x8000
215 #define MDIO_PMA_10GBT_SNR_MAX 127
216
217 /* PMA 10GBASE-R FEC ability register. */
218 #define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */
219 #define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */
220
221 /* PCS 10GBASE-R/-T status register 1. */
222 #define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */
223
224 /* PCS 10GBASE-R/-T status register 2. */
225 #define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff
226 #define MDIO_PCS_10GBRT_STAT2_BER 0x3f00
227
228 /* AN 10GBASE-T control register. */
229 #define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */
230
231 /* AN 10GBASE-T status register. */
232 #define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */
233 #define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */
234 #define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */
235 #define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */
236 #define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */
237 #define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */
238 #define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */
239
240 /* AN EEE Advertisement register. */
241 #define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */
242 #define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */
243
244 /* LASI RX_ALARM control/status registers. */
245 #define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */
246 #define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */
247 #define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */
248 #define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */
249 #define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */
250
251 /* LASI TX_ALARM control/status registers. */
252 #define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */
253 #define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */
254 #define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */
255 #define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */
256 #define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */
257 #define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */
258
259 /* LASI control/status registers. */
260 #define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */
261 #define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */
262 #define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */
263
264 /* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
265
266 #define MDIO_PHY_ID_C45 0x8000
267 #define MDIO_PHY_ID_PRTAD 0x03e0
268 #define MDIO_PHY_ID_DEVAD 0x001f
269 #define MDIO_PHY_ID_C45_MASK \
270 (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
271
mdio_phy_id_c45(int prtad,int devad)272 static inline __u16 mdio_phy_id_c45(int prtad, int devad)
273 {
274 return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
275 }
276
277 #ifdef __KERNEL__
278
mdio_phy_id_is_c45(int phy_id)279 static inline bool mdio_phy_id_is_c45(int phy_id)
280 {
281 return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK);
282 }
283
mdio_phy_id_prtad(int phy_id)284 static inline __u16 mdio_phy_id_prtad(int phy_id)
285 {
286 return (phy_id & MDIO_PHY_ID_PRTAD) >> 5;
287 }
288
mdio_phy_id_devad(int phy_id)289 static inline __u16 mdio_phy_id_devad(int phy_id)
290 {
291 return phy_id & MDIO_PHY_ID_DEVAD;
292 }
293
294 /**
295 * struct mdio_if_info - Ethernet controller MDIO interface
296 * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown)
297 * @mmds: Mask of MMDs expected to be present in the PHY. This must be
298 * non-zero unless @prtad = %MDIO_PRTAD_NONE.
299 * @mode_support: MDIO modes supported. If %MDIO_SUPPORTS_C22 is set then
300 * MII register access will be passed through with @devad =
301 * %MDIO_DEVAD_NONE. If %MDIO_EMULATE_C22 is set then access to
302 * commonly used clause 22 registers will be translated into
303 * clause 45 registers.
304 * @dev: Net device structure
305 * @mdio_read: Register read function; returns value or negative error code
306 * @mdio_write: Register write function; returns 0 or negative error code
307 */
308 struct mdio_if_info {
309 int prtad;
310 u32 mmds;
311 unsigned mode_support;
312
313 struct net_device *dev;
314 int (*mdio_read)(struct net_device *dev, int prtad, int devad,
315 u16 addr);
316 int (*mdio_write)(struct net_device *dev, int prtad, int devad,
317 u16 addr, u16 val);
318 };
319
320 #define MDIO_PRTAD_NONE (-1)
321 #define MDIO_DEVAD_NONE (-1)
322 #define MDIO_SUPPORTS_C22 1
323 #define MDIO_SUPPORTS_C45 2
324 #define MDIO_EMULATE_C22 4
325
326 struct ethtool_cmd;
327 struct ethtool_pauseparam;
328 extern int mdio45_probe(struct mdio_if_info *mdio, int prtad);
329 extern int mdio_set_flag(const struct mdio_if_info *mdio,
330 int prtad, int devad, u16 addr, int mask,
331 bool sense);
332 extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds);
333 extern int mdio45_nway_restart(const struct mdio_if_info *mdio);
334 extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
335 struct ethtool_cmd *ecmd,
336 u32 npage_adv, u32 npage_lpa);
337 extern void
338 mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio,
339 const struct ethtool_pauseparam *ecmd);
340
341 /**
342 * mdio45_ethtool_gset - get settings for ETHTOOL_GSET
343 * @mdio: MDIO interface
344 * @ecmd: Ethtool request structure
345 *
346 * Since the CSRs for auto-negotiation using next pages are not fully
347 * standardised, this function does not attempt to decode them. Use
348 * mdio45_ethtool_gset_npage() to specify advertisement bits from next
349 * pages.
350 */
mdio45_ethtool_gset(const struct mdio_if_info * mdio,struct ethtool_cmd * ecmd)351 static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio,
352 struct ethtool_cmd *ecmd)
353 {
354 mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0);
355 }
356
357 extern int mdio_mii_ioctl(const struct mdio_if_info *mdio,
358 struct mii_ioctl_data *mii_data, int cmd);
359
360 #endif /* __KERNEL__ */
361 #endif /* __LINUX_MDIO_H__ */
362