1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
2 /*
3  * Copyright (C) 2012-2014, 2018-2022 Intel Corporation
4  * Copyright (C) 2017 Intel Deutschland GmbH
5  */
6 #ifndef __iwl_fw_api_mac_h__
7 #define __iwl_fw_api_mac_h__
8 
9 /*
10  * The first MAC indices (starting from 0) are available to the driver,
11  * AUX indices follows - 1 for non-CDB, 2 for CDB.
12  */
13 #define MAC_INDEX_AUX		4
14 #define MAC_INDEX_MIN_DRIVER	0
15 #define NUM_MAC_INDEX_DRIVER	MAC_INDEX_AUX
16 #define NUM_MAC_INDEX		(NUM_MAC_INDEX_DRIVER + 1)
17 #define NUM_MAC_INDEX_CDB	(NUM_MAC_INDEX_DRIVER + 2)
18 
19 #define IWL_MVM_STATION_COUNT_MAX	16
20 #define IWL_MVM_INVALID_STA		0xFF
21 
22 enum iwl_ac {
23 	AC_BK,
24 	AC_BE,
25 	AC_VI,
26 	AC_VO,
27 	AC_NUM,
28 };
29 
30 /**
31  * enum iwl_mac_protection_flags - MAC context flags
32  * @MAC_PROT_FLG_TGG_PROTECT: 11g protection when transmitting OFDM frames,
33  *	this will require CCK RTS/CTS2self.
34  *	RTS/CTS will protect full burst time.
35  * @MAC_PROT_FLG_HT_PROT: enable HT protection
36  * @MAC_PROT_FLG_FAT_PROT: protect 40 MHz transmissions
37  * @MAC_PROT_FLG_SELF_CTS_EN: allow CTS2self
38  */
39 enum iwl_mac_protection_flags {
40 	MAC_PROT_FLG_TGG_PROTECT	= BIT(3),
41 	MAC_PROT_FLG_HT_PROT		= BIT(23),
42 	MAC_PROT_FLG_FAT_PROT		= BIT(24),
43 	MAC_PROT_FLG_SELF_CTS_EN	= BIT(30),
44 };
45 
46 #define MAC_FLG_SHORT_SLOT		BIT(4)
47 #define MAC_FLG_SHORT_PREAMBLE		BIT(5)
48 
49 /**
50  * enum iwl_mac_types - Supported MAC types
51  * @FW_MAC_TYPE_FIRST: lowest supported MAC type
52  * @FW_MAC_TYPE_AUX: Auxiliary MAC (internal)
53  * @FW_MAC_TYPE_LISTENER: monitor MAC type (?)
54  * @FW_MAC_TYPE_PIBSS: Pseudo-IBSS
55  * @FW_MAC_TYPE_IBSS: IBSS
56  * @FW_MAC_TYPE_BSS_STA: BSS (managed) station
57  * @FW_MAC_TYPE_P2P_DEVICE: P2P Device
58  * @FW_MAC_TYPE_P2P_STA: P2P client
59  * @FW_MAC_TYPE_GO: P2P GO
60  * @FW_MAC_TYPE_TEST: ?
61  * @FW_MAC_TYPE_MAX: highest support MAC type
62  */
63 enum iwl_mac_types {
64 	FW_MAC_TYPE_FIRST = 1,
65 	FW_MAC_TYPE_AUX = FW_MAC_TYPE_FIRST,
66 	FW_MAC_TYPE_LISTENER,
67 	FW_MAC_TYPE_PIBSS,
68 	FW_MAC_TYPE_IBSS,
69 	FW_MAC_TYPE_BSS_STA,
70 	FW_MAC_TYPE_P2P_DEVICE,
71 	FW_MAC_TYPE_P2P_STA,
72 	FW_MAC_TYPE_GO,
73 	FW_MAC_TYPE_TEST,
74 	FW_MAC_TYPE_MAX = FW_MAC_TYPE_TEST
75 }; /* MAC_CONTEXT_TYPE_API_E_VER_1 */
76 
77 /**
78  * enum iwl_tsf_id - TSF hw timer ID
79  * @TSF_ID_A: use TSF A
80  * @TSF_ID_B: use TSF B
81  * @TSF_ID_C: use TSF C
82  * @TSF_ID_D: use TSF D
83  * @NUM_TSF_IDS: number of TSF timers available
84  */
85 enum iwl_tsf_id {
86 	TSF_ID_A = 0,
87 	TSF_ID_B = 1,
88 	TSF_ID_C = 2,
89 	TSF_ID_D = 3,
90 	NUM_TSF_IDS = 4,
91 }; /* TSF_ID_API_E_VER_1 */
92 
93 /**
94  * struct iwl_mac_data_ap - configuration data for AP MAC context
95  * @beacon_time: beacon transmit time in system time
96  * @beacon_tsf: beacon transmit time in TSF
97  * @bi: beacon interval in TU
98  * @reserved1: reserved
99  * @dtim_interval: dtim transmit time in TU
100  * @reserved2: reserved
101  * @mcast_qid: queue ID for multicast traffic.
102  *	NOTE: obsolete from VER2 and on
103  * @beacon_template: beacon template ID
104  */
105 struct iwl_mac_data_ap {
106 	__le32 beacon_time;
107 	__le64 beacon_tsf;
108 	__le32 bi;
109 	__le32 reserved1;
110 	__le32 dtim_interval;
111 	__le32 reserved2;
112 	__le32 mcast_qid;
113 	__le32 beacon_template;
114 } __packed; /* AP_MAC_DATA_API_S_VER_2 */
115 
116 /**
117  * struct iwl_mac_data_ibss - configuration data for IBSS MAC context
118  * @beacon_time: beacon transmit time in system time
119  * @beacon_tsf: beacon transmit time in TSF
120  * @bi: beacon interval in TU
121  * @reserved: reserved
122  * @beacon_template: beacon template ID
123  */
124 struct iwl_mac_data_ibss {
125 	__le32 beacon_time;
126 	__le64 beacon_tsf;
127 	__le32 bi;
128 	__le32 reserved;
129 	__le32 beacon_template;
130 } __packed; /* IBSS_MAC_DATA_API_S_VER_1 */
131 
132 /**
133  * enum iwl_mac_data_policy - policy of the data path for this MAC
134  * @TWT_SUPPORTED: twt is supported
135  * @MORE_DATA_ACK_SUPPORTED: AP supports More Data Ack according to
136  *	paragraph 9.4.1.17 in P802.11ax_D4 specification. Used for TWT
137  *	early termination detection.
138  * @FLEXIBLE_TWT_SUPPORTED: AP supports flexible TWT schedule
139  * @PROTECTED_TWT_SUPPORTED: AP supports protected TWT frames (with 11w)
140  * @BROADCAST_TWT_SUPPORTED: AP and STA support broadcast TWT
141  * @COEX_HIGH_PRIORITY_ENABLE: high priority mode for BT coex, to be used
142  *	during 802.1X negotiation (and allowed during 4-way-HS)
143  */
144 enum iwl_mac_data_policy {
145 	TWT_SUPPORTED = BIT(0),
146 	MORE_DATA_ACK_SUPPORTED = BIT(1),
147 	FLEXIBLE_TWT_SUPPORTED = BIT(2),
148 	PROTECTED_TWT_SUPPORTED = BIT(3),
149 	BROADCAST_TWT_SUPPORTED = BIT(4),
150 	COEX_HIGH_PRIORITY_ENABLE = BIT(5),
151 };
152 
153 /**
154  * struct iwl_mac_data_sta - configuration data for station MAC context
155  * @is_assoc: 1 for associated state, 0 otherwise
156  * @dtim_time: DTIM arrival time in system time
157  * @dtim_tsf: DTIM arrival time in TSF
158  * @bi: beacon interval in TU, applicable only when associated
159  * @reserved1: reserved
160  * @dtim_interval: DTIM interval in TU, applicable only when associated
161  * @data_policy: see &enum iwl_mac_data_policy
162  * @listen_interval: in beacon intervals, applicable only when associated
163  * @assoc_id: unique ID assigned by the AP during association
164  * @assoc_beacon_arrive_time: TSF of first beacon after association
165  */
166 struct iwl_mac_data_sta {
167 	__le32 is_assoc;
168 	__le32 dtim_time;
169 	__le64 dtim_tsf;
170 	__le32 bi;
171 	__le32 reserved1;
172 	__le32 dtim_interval;
173 	__le32 data_policy;
174 	__le32 listen_interval;
175 	__le32 assoc_id;
176 	__le32 assoc_beacon_arrive_time;
177 } __packed; /* STA_MAC_DATA_API_S_VER_2 */
178 
179 /**
180  * struct iwl_mac_data_go - configuration data for P2P GO MAC context
181  * @ap: iwl_mac_data_ap struct with most config data
182  * @ctwin: client traffic window in TU (period after TBTT when GO is present).
183  *	0 indicates that there is no CT window.
184  * @opp_ps_enabled: indicate that opportunistic PS allowed
185  */
186 struct iwl_mac_data_go {
187 	struct iwl_mac_data_ap ap;
188 	__le32 ctwin;
189 	__le32 opp_ps_enabled;
190 } __packed; /* GO_MAC_DATA_API_S_VER_1 */
191 
192 /**
193  * struct iwl_mac_data_p2p_sta - configuration data for P2P client MAC context
194  * @sta: iwl_mac_data_sta struct with most config data
195  * @ctwin: client traffic window in TU (period after TBTT when GO is present).
196  *	0 indicates that there is no CT window.
197  */
198 struct iwl_mac_data_p2p_sta {
199 	struct iwl_mac_data_sta sta;
200 	__le32 ctwin;
201 } __packed; /* P2P_STA_MAC_DATA_API_S_VER_2 */
202 
203 /**
204  * struct iwl_mac_data_pibss - Pseudo IBSS config data
205  * @stats_interval: interval in TU between statistics notifications to host.
206  */
207 struct iwl_mac_data_pibss {
208 	__le32 stats_interval;
209 } __packed; /* PIBSS_MAC_DATA_API_S_VER_1 */
210 
211 /*
212  * struct iwl_mac_data_p2p_dev - configuration data for the P2P Device MAC
213  * context.
214  * @is_disc_extended: if set to true, P2P Device discoverability is enabled on
215  *	other channels as well. This should be to true only in case that the
216  *	device is discoverable and there is an active GO. Note that setting this
217  *	field when not needed, will increase the number of interrupts and have
218  *	effect on the platform power, as this setting opens the Rx filters on
219  *	all macs.
220  */
221 struct iwl_mac_data_p2p_dev {
222 	__le32 is_disc_extended;
223 } __packed; /* _P2P_DEV_MAC_DATA_API_S_VER_1 */
224 
225 /**
226  * enum iwl_mac_filter_flags - MAC context filter flags
227  * @MAC_FILTER_IN_PROMISC: accept all data frames
228  * @MAC_FILTER_IN_CONTROL_AND_MGMT: pass all management and
229  *	control frames to the host
230  * @MAC_FILTER_ACCEPT_GRP: accept multicast frames
231  * @MAC_FILTER_DIS_DECRYPT: don't decrypt unicast frames
232  * @MAC_FILTER_DIS_GRP_DECRYPT: don't decrypt multicast frames
233  * @MAC_FILTER_IN_BEACON: transfer foreign BSS's beacons to host
234  *	(in station mode when associated)
235  * @MAC_FILTER_OUT_BCAST: filter out all broadcast frames
236  * @MAC_FILTER_IN_CRC32: extract FCS and append it to frames
237  * @MAC_FILTER_IN_PROBE_REQUEST: pass probe requests to host
238  */
239 enum iwl_mac_filter_flags {
240 	MAC_FILTER_IN_PROMISC		= BIT(0),
241 	MAC_FILTER_IN_CONTROL_AND_MGMT	= BIT(1),
242 	MAC_FILTER_ACCEPT_GRP		= BIT(2),
243 	MAC_FILTER_DIS_DECRYPT		= BIT(3),
244 	MAC_FILTER_DIS_GRP_DECRYPT	= BIT(4),
245 	MAC_FILTER_IN_BEACON		= BIT(6),
246 	MAC_FILTER_OUT_BCAST		= BIT(8),
247 	MAC_FILTER_IN_CRC32		= BIT(11),
248 	MAC_FILTER_IN_PROBE_REQUEST	= BIT(12),
249 	/**
250 	 * @MAC_FILTER_IN_11AX: mark BSS as supporting 802.11ax
251 	 */
252 	MAC_FILTER_IN_11AX		= BIT(14),
253 };
254 
255 /**
256  * enum iwl_mac_qos_flags - QoS flags
257  * @MAC_QOS_FLG_UPDATE_EDCA: ?
258  * @MAC_QOS_FLG_TGN: HT is enabled
259  * @MAC_QOS_FLG_TXOP_TYPE: ?
260  *
261  */
262 enum iwl_mac_qos_flags {
263 	MAC_QOS_FLG_UPDATE_EDCA	= BIT(0),
264 	MAC_QOS_FLG_TGN		= BIT(1),
265 	MAC_QOS_FLG_TXOP_TYPE	= BIT(4),
266 };
267 
268 /**
269  * struct iwl_ac_qos - QOS timing params for MAC_CONTEXT_CMD
270  * @cw_min: Contention window, start value in numbers of slots.
271  *	Should be a power-of-2, minus 1.  Device's default is 0x0f.
272  * @cw_max: Contention window, max value in numbers of slots.
273  *	Should be a power-of-2, minus 1.  Device's default is 0x3f.
274  * @aifsn:  Number of slots in Arbitration Interframe Space (before
275  *	performing random backoff timing prior to Tx).  Device default 1.
276  * @fifos_mask: FIFOs used by this MAC for this AC
277  * @edca_txop:  Length of Tx opportunity, in uSecs.  Device default is 0.
278  *
279  * One instance of this config struct for each of 4 EDCA access categories
280  * in struct iwl_qosparam_cmd.
281  *
282  * Device will automatically increase contention window by (2*CW) + 1 for each
283  * transmission retry.  Device uses cw_max as a bit mask, ANDed with new CW
284  * value, to cap the CW value.
285  */
286 struct iwl_ac_qos {
287 	__le16 cw_min;
288 	__le16 cw_max;
289 	u8 aifsn;
290 	u8 fifos_mask;
291 	__le16 edca_txop;
292 } __packed; /* AC_QOS_API_S_VER_2 */
293 
294 /**
295  * struct iwl_mac_ctx_cmd - command structure to configure MAC contexts
296  * ( MAC_CONTEXT_CMD = 0x28 )
297  * @id_and_color: ID and color of the MAC
298  * @action: action to perform, see &enum iwl_ctxt_action
299  * @mac_type: one of &enum iwl_mac_types
300  * @tsf_id: TSF HW timer, one of &enum iwl_tsf_id
301  * @node_addr: MAC address
302  * @reserved_for_node_addr: reserved
303  * @bssid_addr: BSSID
304  * @reserved_for_bssid_addr: reserved
305  * @cck_rates: basic rates available for CCK
306  * @ofdm_rates: basic rates available for OFDM
307  * @protection_flags: combination of &enum iwl_mac_protection_flags
308  * @cck_short_preamble: 0x20 for enabling short preamble, 0 otherwise
309  * @short_slot: 0x10 for enabling short slots, 0 otherwise
310  * @filter_flags: combination of &enum iwl_mac_filter_flags
311  * @qos_flags: from &enum iwl_mac_qos_flags
312  * @ac: one iwl_mac_qos configuration for each AC
313  */
314 struct iwl_mac_ctx_cmd {
315 	/* COMMON_INDEX_HDR_API_S_VER_1 */
316 	__le32 id_and_color;
317 	__le32 action;
318 	/* MAC_CONTEXT_COMMON_DATA_API_S_VER_1 */
319 	__le32 mac_type;
320 	__le32 tsf_id;
321 	u8 node_addr[6];
322 	__le16 reserved_for_node_addr;
323 	u8 bssid_addr[6];
324 	__le16 reserved_for_bssid_addr;
325 	__le32 cck_rates;
326 	__le32 ofdm_rates;
327 	__le32 protection_flags;
328 	__le32 cck_short_preamble;
329 	__le32 short_slot;
330 	__le32 filter_flags;
331 	/* MAC_QOS_PARAM_API_S_VER_1 */
332 	__le32 qos_flags;
333 	struct iwl_ac_qos ac[AC_NUM+1];
334 	/* MAC_CONTEXT_COMMON_DATA_API_S */
335 	union {
336 		struct iwl_mac_data_ap ap;
337 		struct iwl_mac_data_go go;
338 		struct iwl_mac_data_sta sta;
339 		struct iwl_mac_data_p2p_sta p2p_sta;
340 		struct iwl_mac_data_p2p_dev p2p_dev;
341 		struct iwl_mac_data_pibss pibss;
342 		struct iwl_mac_data_ibss ibss;
343 	};
344 } __packed; /* MAC_CONTEXT_CMD_API_S_VER_1 */
345 
346 #define IWL_NONQOS_SEQ_GET	0x1
347 #define IWL_NONQOS_SEQ_SET	0x2
348 struct iwl_nonqos_seq_query_cmd {
349 	__le32 get_set_flag;
350 	__le32 mac_id_n_color;
351 	__le16 value;
352 	__le16 reserved;
353 } __packed; /* NON_QOS_TX_COUNTER_GET_SET_API_S_VER_1 */
354 
355 /**
356  * struct iwl_missed_beacons_notif_ver_3 - information on missed beacons
357  * ( MISSED_BEACONS_NOTIFICATION = 0xa2 )
358  * @mac_id: interface ID
359  * @consec_missed_beacons_since_last_rx: number of consecutive missed
360  *	beacons since last RX.
361  * @consec_missed_beacons: number of consecutive missed beacons
362  * @num_expected_beacons: number of expected beacons
363  * @num_recvd_beacons: number of received beacons
364  */
365 struct iwl_missed_beacons_notif_ver_3 {
366 	__le32 mac_id;
367 	__le32 consec_missed_beacons_since_last_rx;
368 	__le32 consec_missed_beacons;
369 	__le32 num_expected_beacons;
370 	__le32 num_recvd_beacons;
371 } __packed; /* MISSED_BEACON_NTFY_API_S_VER_3 */
372 
373 /**
374  * struct iwl_missed_beacons_notif - information on missed beacons
375  * ( MISSED_BEACONS_NOTIFICATION = 0xa2 )
376  * @link_id: fw link ID
377  * @consec_missed_beacons_since_last_rx: number of consecutive missed
378  *	beacons since last RX.
379  * @consec_missed_beacons: number of consecutive missed beacons
380  * @num_expected_beacons: number of expected beacons
381  * @num_recvd_beacons: number of received beacons
382  */
383 struct iwl_missed_beacons_notif {
384 	__le32 link_id;
385 	__le32 consec_missed_beacons_since_last_rx;
386 	__le32 consec_missed_beacons;
387 	__le32 num_expected_beacons;
388 	__le32 num_recvd_beacons;
389 } __packed; /* MISSED_BEACON_NTFY_API_S_VER_4 */
390 
391 /**
392  * struct iwl_he_backoff_conf - used for backoff configuration
393  * Per each trigger-based AC, (set by MU EDCA Parameter set info-element)
394  * used for backoff configuration of TXF5..TXF8 trigger based.
395  * The MU-TIMER is reloaded w/ MU_TIME each time a frame from the AC is sent via
396  * trigger-based TX.
397  * @cwmin: CW min
398  * @cwmax: CW max
399  * @aifsn: AIFSN
400  *	AIFSN=0, means that no backoff from the specified TRIG-BASED AC is
401  *	allowed till the MU-TIMER is 0
402  * @mu_time: MU time in 8TU units
403  */
404 struct iwl_he_backoff_conf {
405 	__le16 cwmin;
406 	__le16 cwmax;
407 	__le16 aifsn;
408 	__le16 mu_time;
409 } __packed; /* AC_QOS_DOT11AX_API_S */
410 
411 /**
412  * enum iwl_he_pkt_ext_constellations - PPE constellation indices
413  * @IWL_HE_PKT_EXT_BPSK: BPSK
414  * @IWL_HE_PKT_EXT_QPSK:  QPSK
415  * @IWL_HE_PKT_EXT_16QAM: 16-QAM
416  * @IWL_HE_PKT_EXT_64QAM: 64-QAM
417  * @IWL_HE_PKT_EXT_256QAM: 256-QAM
418  * @IWL_HE_PKT_EXT_1024QAM: 1024-QAM
419  * @IWL_HE_PKT_EXT_4096QAM: 4096-QAM, for EHT only
420  * @IWL_HE_PKT_EXT_NONE: not defined
421  */
422 enum iwl_he_pkt_ext_constellations {
423 	IWL_HE_PKT_EXT_BPSK = 0,
424 	IWL_HE_PKT_EXT_QPSK,
425 	IWL_HE_PKT_EXT_16QAM,
426 	IWL_HE_PKT_EXT_64QAM,
427 	IWL_HE_PKT_EXT_256QAM,
428 	IWL_HE_PKT_EXT_1024QAM,
429 	IWL_HE_PKT_EXT_4096QAM,
430 	IWL_HE_PKT_EXT_NONE,
431 };
432 
433 #define MAX_HE_SUPP_NSS	2
434 #define MAX_CHANNEL_BW_INDX_API_D_VER_2	4
435 #define MAX_CHANNEL_BW_INDX_API_D_VER_3	5
436 
437 /**
438  * struct iwl_he_pkt_ext_v1 - QAM thresholds
439  * The required PPE is set via HE Capabilities IE, per Nss x BW x MCS
440  * The IE is organized in the following way:
441  * Support for Nss x BW (or RU) matrix:
442  *	(0=SISO, 1=MIMO2) x (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz)
443  * Each entry contains 2 QAM thresholds for 8us and 16us:
444  *	0=BPSK, 1=QPSK, 2=16QAM, 3=64QAM, 4=256QAM, 5=1024QAM, 6=RES, 7=NONE
445  * i.e. QAM_th1 < QAM_th2 such if TX uses QAM_tx:
446  *	QAM_tx < QAM_th1            --> PPE=0us
447  *	QAM_th1 <= QAM_tx < QAM_th2 --> PPE=8us
448  *	QAM_th2 <= QAM_tx           --> PPE=16us
449  * @pkt_ext_qam_th: QAM thresholds
450  *	For each Nss/Bw define 2 QAM thrsholds (0..5)
451  *	For rates below the low_th, no need for PPE
452  *	For rates between low_th and high_th, need 8us PPE
453  *	For rates equal or higher then the high_th, need 16us PPE
454  *	Nss (0-siso, 1-mimo2) x BW (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz) x
455  *		(0-low_th, 1-high_th)
456  */
457 struct iwl_he_pkt_ext_v1 {
458 	u8 pkt_ext_qam_th[MAX_HE_SUPP_NSS][MAX_CHANNEL_BW_INDX_API_D_VER_2][2];
459 } __packed; /* PKT_EXT_DOT11AX_API_S_VER_1 */
460 
461 /**
462  * struct iwl_he_pkt_ext_v2 - QAM thresholds
463  * The required PPE is set via HE Capabilities IE, per Nss x BW x MCS
464  * The IE is organized in the following way:
465  * Support for Nss x BW (or RU) matrix:
466  *	(0=SISO, 1=MIMO2) x (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz)
467  * Each entry contains 2 QAM thresholds for 8us and 16us:
468  *	0=BPSK, 1=QPSK, 2=16QAM, 3=64QAM, 4=256QAM, 5=1024QAM, 6=RES, 7=NONE
469  * i.e. QAM_th1 < QAM_th2 such if TX uses QAM_tx:
470  *	QAM_tx < QAM_th1            --> PPE=0us
471  *	QAM_th1 <= QAM_tx < QAM_th2 --> PPE=8us
472  *	QAM_th2 <= QAM_tx           --> PPE=16us
473  * @pkt_ext_qam_th: QAM thresholds
474  *	For each Nss/Bw define 2 QAM thrsholds (0..5)
475  *	For rates below the low_th, no need for PPE
476  *	For rates between low_th and high_th, need 8us PPE
477  *	For rates equal or higher then the high_th, need 16us PPE
478  *	Nss (0-siso, 1-mimo2) x
479  *	BW (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz, 4-320MHz) x
480  *	(0-low_th, 1-high_th)
481  */
482 struct iwl_he_pkt_ext_v2 {
483 	u8 pkt_ext_qam_th[MAX_HE_SUPP_NSS][MAX_CHANNEL_BW_INDX_API_D_VER_3][2];
484 } __packed; /* PKT_EXT_DOT11AX_API_S_VER_2 */
485 
486 /**
487  * enum iwl_he_sta_ctxt_flags - HE STA context flags
488  * @STA_CTXT_HE_REF_BSSID_VALID: ref bssid addr valid (for receiving specific
489  *	control frames such as TRIG, NDPA, BACK)
490  * @STA_CTXT_HE_BSS_COLOR_DIS: BSS color disable, don't use the BSS
491  *	color for RX filter but use MAC header
492  * @STA_CTXT_HE_PARTIAL_BSS_COLOR: partial BSS color allocation
493  * @STA_CTXT_HE_32BIT_BA_BITMAP: indicates the receiver supports BA bitmap
494  *	of 32-bits
495  * @STA_CTXT_HE_PACKET_EXT: indicates that the packet-extension info is valid
496  *	and should be used
497  * @STA_CTXT_HE_TRIG_RND_ALLOC: indicates that trigger based random allocation
498  *	is enabled according to UORA element existence
499  * @STA_CTXT_HE_CONST_TRIG_RND_ALLOC: used for AV testing
500  * @STA_CTXT_HE_ACK_ENABLED: indicates that the AP supports receiving ACK-
501  *	enabled AGG, i.e. both BACK and non-BACK frames in a single AGG
502  * @STA_CTXT_HE_MU_EDCA_CW: indicates that there is an element of MU EDCA
503  *	parameter set, i.e. the backoff counters for trig-based ACs
504  * @STA_CTXT_HE_NIC_NOT_ACK_ENABLED: mark that the NIC doesn't support receiving
505  *	ACK-enabled AGG, (i.e. both BACK and non-BACK frames in single AGG).
506  *	If the NIC is not ACK_ENABLED it may use the EOF-bit in first non-0
507  *	len delim to determine if AGG or single.
508  * @STA_CTXT_HE_RU_2MHZ_BLOCK: indicates that 26-tone RU OFDMA transmission are
509  *      not allowed (as there are OBSS that might classify such transmissions as
510  *      radar pulses).
511  * @STA_CTXT_HE_NDP_FEEDBACK_ENABLED: mark support for NDP feedback and change
512  *	of threshold
513  * @STA_CTXT_EHT_PUNCTURE_MASK_VALID: indicates the puncture_mask field is valid
514  * @STA_CTXT_EHT_LONG_PPE_ENABLED: indicates the PPE requirement should be
515  *	extended to 20us for BW > 160Mhz or for MCS w/ 4096-QAM.
516  */
517 enum iwl_he_sta_ctxt_flags {
518 	STA_CTXT_HE_REF_BSSID_VALID		= BIT(4),
519 	STA_CTXT_HE_BSS_COLOR_DIS		= BIT(5),
520 	STA_CTXT_HE_PARTIAL_BSS_COLOR		= BIT(6),
521 	STA_CTXT_HE_32BIT_BA_BITMAP		= BIT(7),
522 	STA_CTXT_HE_PACKET_EXT			= BIT(8),
523 	STA_CTXT_HE_TRIG_RND_ALLOC		= BIT(9),
524 	STA_CTXT_HE_CONST_TRIG_RND_ALLOC	= BIT(10),
525 	STA_CTXT_HE_ACK_ENABLED			= BIT(11),
526 	STA_CTXT_HE_MU_EDCA_CW			= BIT(12),
527 	STA_CTXT_HE_NIC_NOT_ACK_ENABLED		= BIT(13),
528 	STA_CTXT_HE_RU_2MHZ_BLOCK		= BIT(14),
529 	STA_CTXT_HE_NDP_FEEDBACK_ENABLED	= BIT(15),
530 	STA_CTXT_EHT_PUNCTURE_MASK_VALID	= BIT(16),
531 	STA_CTXT_EHT_LONG_PPE_ENABLED		= BIT(17),
532 };
533 
534 /**
535  * enum iwl_he_htc_flags - HE HTC support flags
536  * @IWL_HE_HTC_SUPPORT: HE-HTC support
537  * @IWL_HE_HTC_UL_MU_RESP_SCHED: HE UL MU response schedule
538  *	support via A-control field
539  * @IWL_HE_HTC_BSR_SUPP: BSR support in A-control field
540  * @IWL_HE_HTC_OMI_SUPP: A-OMI support in A-control field
541  * @IWL_HE_HTC_BQR_SUPP: A-BQR support in A-control field
542  */
543 enum iwl_he_htc_flags {
544 	IWL_HE_HTC_SUPPORT			= BIT(0),
545 	IWL_HE_HTC_UL_MU_RESP_SCHED		= BIT(3),
546 	IWL_HE_HTC_BSR_SUPP			= BIT(4),
547 	IWL_HE_HTC_OMI_SUPP			= BIT(5),
548 	IWL_HE_HTC_BQR_SUPP			= BIT(6),
549 };
550 
551 /*
552  * @IWL_HE_HTC_LINK_ADAP_NO_FEEDBACK: the STA does not provide HE MFB
553  * @IWL_HE_HTC_LINK_ADAP_UNSOLICITED: the STA provides only unsolicited HE MFB
554  * @IWL_HE_HTC_LINK_ADAP_BOTH: the STA is capable of providing HE MFB in
555  *      response to HE MRQ and if the STA provides unsolicited HE MFB
556  */
557 #define IWL_HE_HTC_LINK_ADAP_POS		(1)
558 #define IWL_HE_HTC_LINK_ADAP_NO_FEEDBACK	(0)
559 #define IWL_HE_HTC_LINK_ADAP_UNSOLICITED	(2 << IWL_HE_HTC_LINK_ADAP_POS)
560 #define IWL_HE_HTC_LINK_ADAP_BOTH		(3 << IWL_HE_HTC_LINK_ADAP_POS)
561 
562 /**
563  * struct iwl_he_sta_context_cmd_v1 - configure FW to work with HE AP
564  * @sta_id: STA id
565  * @tid_limit: max num of TIDs in TX HE-SU multi-TID agg
566  *	0 - bad value, 1 - multi-tid not supported, 2..8 - tid limit
567  * @reserved1: reserved byte for future use
568  * @reserved2: reserved byte for future use
569  * @flags: see %iwl_11ax_sta_ctxt_flags
570  * @ref_bssid_addr: reference BSSID used by the AP
571  * @reserved0: reserved 2 bytes for aligning the ref_bssid_addr field to 8 bytes
572  * @htc_flags: which features are supported in HTC
573  * @frag_flags: frag support in A-MSDU
574  * @frag_level: frag support level
575  * @frag_max_num: max num of "open" MSDUs in the receiver (in power of 2)
576  * @frag_min_size: min frag size (except last frag)
577  * @pkt_ext: optional, exists according to PPE-present bit in the HE-PHY capa
578  * @bss_color: 11ax AP ID that is used in the HE SIG-A to mark inter BSS frame
579  * @htc_trig_based_pkt_ext: default PE in 4us units
580  * @frame_time_rts_th: HE duration RTS threshold, in units of 32us
581  * @rand_alloc_ecwmin: random CWmin = 2**ECWmin-1
582  * @rand_alloc_ecwmax: random CWmax = 2**ECWmax-1
583  * @reserved3: reserved byte for future use
584  * @trig_based_txf: MU EDCA Parameter set for the trigger based traffic queues
585  */
586 struct iwl_he_sta_context_cmd_v1 {
587 	u8 sta_id;
588 	u8 tid_limit;
589 	u8 reserved1;
590 	u8 reserved2;
591 	__le32 flags;
592 
593 	/* The below fields are set via Multiple BSSID IE */
594 	u8 ref_bssid_addr[6];
595 	__le16 reserved0;
596 
597 	/* The below fields are set via HE-capabilities IE */
598 	__le32 htc_flags;
599 
600 	u8 frag_flags;
601 	u8 frag_level;
602 	u8 frag_max_num;
603 	u8 frag_min_size;
604 
605 	/* The below fields are set via PPE thresholds element */
606 	struct iwl_he_pkt_ext_v1 pkt_ext;
607 
608 	/* The below fields are set via HE-Operation IE */
609 	u8 bss_color;
610 	u8 htc_trig_based_pkt_ext;
611 	__le16 frame_time_rts_th;
612 
613 	/* Random access parameter set (i.e. RAPS) */
614 	u8 rand_alloc_ecwmin;
615 	u8 rand_alloc_ecwmax;
616 	__le16 reserved3;
617 
618 	/* The below fields are set via MU EDCA parameter set element */
619 	struct iwl_he_backoff_conf trig_based_txf[AC_NUM];
620 } __packed; /* STA_CONTEXT_DOT11AX_API_S_VER_1 */
621 
622 /**
623  * struct iwl_he_sta_context_cmd_v2 - configure FW to work with HE AP
624  * @sta_id: STA id
625  * @tid_limit: max num of TIDs in TX HE-SU multi-TID agg
626  *	0 - bad value, 1 - multi-tid not supported, 2..8 - tid limit
627  * @reserved1: reserved byte for future use
628  * @reserved2: reserved byte for future use
629  * @flags: see %iwl_11ax_sta_ctxt_flags
630  * @ref_bssid_addr: reference BSSID used by the AP
631  * @reserved0: reserved 2 bytes for aligning the ref_bssid_addr field to 8 bytes
632  * @htc_flags: which features are supported in HTC
633  * @frag_flags: frag support in A-MSDU
634  * @frag_level: frag support level
635  * @frag_max_num: max num of "open" MSDUs in the receiver (in power of 2)
636  * @frag_min_size: min frag size (except last frag)
637  * @pkt_ext: optional, exists according to PPE-present bit in the HE-PHY capa
638  * @bss_color: 11ax AP ID that is used in the HE SIG-A to mark inter BSS frame
639  * @htc_trig_based_pkt_ext: default PE in 4us units
640  * @frame_time_rts_th: HE duration RTS threshold, in units of 32us
641  * @rand_alloc_ecwmin: random CWmin = 2**ECWmin-1
642  * @rand_alloc_ecwmax: random CWmax = 2**ECWmax-1
643  * @reserved3: reserved byte for future use
644  * @trig_based_txf: MU EDCA Parameter set for the trigger based traffic queues
645  * @max_bssid_indicator: indicator of the max bssid supported on the associated
646  *	bss
647  * @bssid_index: index of the associated VAP
648  * @ema_ap: AP supports enhanced Multi BSSID advertisement
649  * @profile_periodicity: number of Beacon periods that are needed to receive the
650  *	complete VAPs info
651  * @bssid_count: actual number of VAPs in the MultiBSS Set
652  * @reserved4: alignment
653  */
654 struct iwl_he_sta_context_cmd_v2 {
655 	u8 sta_id;
656 	u8 tid_limit;
657 	u8 reserved1;
658 	u8 reserved2;
659 	__le32 flags;
660 
661 	/* The below fields are set via Multiple BSSID IE */
662 	u8 ref_bssid_addr[6];
663 	__le16 reserved0;
664 
665 	/* The below fields are set via HE-capabilities IE */
666 	__le32 htc_flags;
667 
668 	u8 frag_flags;
669 	u8 frag_level;
670 	u8 frag_max_num;
671 	u8 frag_min_size;
672 
673 	/* The below fields are set via PPE thresholds element */
674 	struct iwl_he_pkt_ext_v1 pkt_ext;
675 
676 	/* The below fields are set via HE-Operation IE */
677 	u8 bss_color;
678 	u8 htc_trig_based_pkt_ext;
679 	__le16 frame_time_rts_th;
680 
681 	/* Random access parameter set (i.e. RAPS) */
682 	u8 rand_alloc_ecwmin;
683 	u8 rand_alloc_ecwmax;
684 	__le16 reserved3;
685 
686 	/* The below fields are set via MU EDCA parameter set element */
687 	struct iwl_he_backoff_conf trig_based_txf[AC_NUM];
688 
689 	u8 max_bssid_indicator;
690 	u8 bssid_index;
691 	u8 ema_ap;
692 	u8 profile_periodicity;
693 	u8 bssid_count;
694 	u8 reserved4[3];
695 } __packed; /* STA_CONTEXT_DOT11AX_API_S_VER_2 */
696 
697 /**
698  * struct iwl_he_sta_context_cmd_v3 - configure FW to work with HE AP
699  * @sta_id: STA id
700  * @tid_limit: max num of TIDs in TX HE-SU multi-TID agg
701  *	0 - bad value, 1 - multi-tid not supported, 2..8 - tid limit
702  * @reserved1: reserved byte for future use
703  * @reserved2: reserved byte for future use
704  * @flags: see %iwl_11ax_sta_ctxt_flags
705  * @ref_bssid_addr: reference BSSID used by the AP
706  * @reserved0: reserved 2 bytes for aligning the ref_bssid_addr field to 8 bytes
707  * @htc_flags: which features are supported in HTC
708  * @frag_flags: frag support in A-MSDU
709  * @frag_level: frag support level
710  * @frag_max_num: max num of "open" MSDUs in the receiver (in power of 2)
711  * @frag_min_size: min frag size (except last frag)
712  * @pkt_ext: optional, exists according to PPE-present bit in the HE-PHY capa
713  * @bss_color: 11ax AP ID that is used in the HE SIG-A to mark inter BSS frame
714  * @htc_trig_based_pkt_ext: default PE in 4us units
715  * @frame_time_rts_th: HE duration RTS threshold, in units of 32us
716  * @rand_alloc_ecwmin: random CWmin = 2**ECWmin-1
717  * @rand_alloc_ecwmax: random CWmax = 2**ECWmax-1
718  * @puncture_mask: puncture mask for EHT
719  * @trig_based_txf: MU EDCA Parameter set for the trigger based traffic queues
720  * @max_bssid_indicator: indicator of the max bssid supported on the associated
721  *	bss
722  * @bssid_index: index of the associated VAP
723  * @ema_ap: AP supports enhanced Multi BSSID advertisement
724  * @profile_periodicity: number of Beacon periods that are needed to receive the
725  *	complete VAPs info
726  * @bssid_count: actual number of VAPs in the MultiBSS Set
727  * @reserved4: alignment
728  */
729 struct iwl_he_sta_context_cmd_v3 {
730 	u8 sta_id;
731 	u8 tid_limit;
732 	u8 reserved1;
733 	u8 reserved2;
734 	__le32 flags;
735 
736 	/* The below fields are set via Multiple BSSID IE */
737 	u8 ref_bssid_addr[6];
738 	__le16 reserved0;
739 
740 	/* The below fields are set via HE-capabilities IE */
741 	__le32 htc_flags;
742 
743 	u8 frag_flags;
744 	u8 frag_level;
745 	u8 frag_max_num;
746 	u8 frag_min_size;
747 
748 	/* The below fields are set via PPE thresholds element */
749 	struct iwl_he_pkt_ext_v2 pkt_ext;
750 
751 	/* The below fields are set via HE-Operation IE */
752 	u8 bss_color;
753 	u8 htc_trig_based_pkt_ext;
754 	__le16 frame_time_rts_th;
755 
756 	/* Random access parameter set (i.e. RAPS) */
757 	u8 rand_alloc_ecwmin;
758 	u8 rand_alloc_ecwmax;
759 	__le16 puncture_mask;
760 
761 	/* The below fields are set via MU EDCA parameter set element */
762 	struct iwl_he_backoff_conf trig_based_txf[AC_NUM];
763 
764 	u8 max_bssid_indicator;
765 	u8 bssid_index;
766 	u8 ema_ap;
767 	u8 profile_periodicity;
768 	u8 bssid_count;
769 	u8 reserved4[3];
770 } __packed; /* STA_CONTEXT_DOT11AX_API_S_VER_2 */
771 
772 /**
773  * struct iwl_he_monitor_cmd - configure air sniffer for HE
774  * @bssid: the BSSID to sniff for
775  * @reserved1: reserved for dword alignment
776  * @aid: the AID to track on for HE MU
777  * @reserved2: reserved for future use
778  */
779 struct iwl_he_monitor_cmd {
780 	u8 bssid[6];
781 	__le16 reserved1;
782 	__le16 aid;
783 	u8 reserved2[6];
784 } __packed; /* HE_AIR_SNIFFER_CONFIG_CMD_API_S_VER_1 */
785 
786 #endif /* __iwl_fw_api_mac_h__ */
787