1 /* 2 * ipmi.h 3 * 4 * MontaVista IPMI interface 5 * 6 * Author: MontaVista Software, Inc. 7 * Corey Minyard <minyard@mvista.com> 8 * source@mvista.com 9 * 10 * Copyright 2002 MontaVista Software Inc. 11 * 12 * This program is free software; you can redistribute it and/or modify it 13 * under the terms of the GNU General Public License as published by the 14 * Free Software Foundation; either version 2 of the License, or (at your 15 * option) any later version. 16 * 17 * 18 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED 19 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 20 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 23 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 24 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 25 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 26 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 27 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 * 29 * You should have received a copy of the GNU General Public License along 30 * with this program; if not, write to the Free Software Foundation, Inc., 31 * 675 Mass Ave, Cambridge, MA 02139, USA. 32 */ 33 34 #ifndef __LINUX_IPMI_H 35 #define __LINUX_IPMI_H 36 37 #include <linux/ipmi_msgdefs.h> 38 #include <linux/compiler.h> 39 40 /* 41 * This file describes an interface to an IPMI driver. You have to 42 * have a fairly good understanding of IPMI to use this, so go read 43 * the specs first before actually trying to do anything. 44 * 45 * With that said, this driver provides a multi-user interface to the 46 * IPMI driver, and it allows multiple IPMI physical interfaces below 47 * the driver. The physical interfaces bind as a lower layer on the 48 * driver. They appear as interfaces to the application using this 49 * interface. 50 * 51 * Multi-user means that multiple applications may use the driver, 52 * send commands, receive responses, etc. The driver keeps track of 53 * commands the user sends and tracks the responses. The responses 54 * will go back to the application that send the command. If the 55 * response doesn't come back in time, the driver will return a 56 * timeout error response to the application. Asynchronous events 57 * from the BMC event queue will go to all users bound to the driver. 58 * The incoming event queue in the BMC will automatically be flushed 59 * if it becomes full and it is queried once a second to see if 60 * anything is in it. Incoming commands to the driver will get 61 * delivered as commands. 62 * 63 * This driver provides two main interfaces: one for in-kernel 64 * applications and another for userland applications. The 65 * capabilities are basically the same for both interface, although 66 * the interfaces are somewhat different. The stuff in the 67 * #ifdef __KERNEL__ below is the in-kernel interface. The userland 68 * interface is defined later in the file. */ 69 70 71 72 /* 73 * This is an overlay for all the address types, so it's easy to 74 * determine the actual address type. This is kind of like addresses 75 * work for sockets. 76 */ 77 #define IPMI_MAX_ADDR_SIZE 32 78 struct ipmi_addr { 79 /* Try to take these from the "Channel Medium Type" table 80 in section 6.5 of the IPMI 1.5 manual. */ 81 int addr_type; 82 short channel; 83 char data[IPMI_MAX_ADDR_SIZE]; 84 }; 85 86 /* 87 * When the address is not used, the type will be set to this value. 88 * The channel is the BMC's channel number for the channel (usually 89 * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC. 90 */ 91 #define IPMI_SYSTEM_INTERFACE_ADDR_TYPE 0x0c 92 struct ipmi_system_interface_addr { 93 int addr_type; 94 short channel; 95 unsigned char lun; 96 }; 97 98 /* An IPMB Address. */ 99 #define IPMI_IPMB_ADDR_TYPE 0x01 100 /* Used for broadcast get device id as described in section 17.9 of the 101 IPMI 1.5 manual. */ 102 #define IPMI_IPMB_BROADCAST_ADDR_TYPE 0x41 103 struct ipmi_ipmb_addr { 104 int addr_type; 105 short channel; 106 unsigned char slave_addr; 107 unsigned char lun; 108 }; 109 110 /* 111 * A LAN Address. This is an address to/from a LAN interface bridged 112 * by the BMC, not an address actually out on the LAN. 113 * 114 * A conscious decision was made here to deviate slightly from the IPMI 115 * spec. We do not use rqSWID and rsSWID like it shows in the 116 * message. Instead, we use remote_SWID and local_SWID. This means 117 * that any message (a request or response) from another device will 118 * always have exactly the same address. If you didn't do this, 119 * requests and responses from the same device would have different 120 * addresses, and that's not too cool. 121 * 122 * In this address, the remote_SWID is always the SWID the remote 123 * message came from, or the SWID we are sending the message to. 124 * local_SWID is always our SWID. Note that having our SWID in the 125 * message is a little weird, but this is required. 126 */ 127 #define IPMI_LAN_ADDR_TYPE 0x04 128 struct ipmi_lan_addr { 129 int addr_type; 130 short channel; 131 unsigned char privilege; 132 unsigned char session_handle; 133 unsigned char remote_SWID; 134 unsigned char local_SWID; 135 unsigned char lun; 136 }; 137 138 139 /* 140 * Channel for talking directly with the BMC. When using this 141 * channel, This is for the system interface address type only. FIXME 142 * - is this right, or should we use -1? 143 */ 144 #define IPMI_BMC_CHANNEL 0xf 145 #define IPMI_NUM_CHANNELS 0x10 146 147 /* 148 * Used to signify an "all channel" bitmask. This is more than the 149 * actual number of channels because this is used in userland and 150 * will cover us if the number of channels is extended. 151 */ 152 #define IPMI_CHAN_ALL (~0) 153 154 155 /* 156 * A raw IPMI message without any addressing. This covers both 157 * commands and responses. The completion code is always the first 158 * byte of data in the response (as the spec shows the messages laid 159 * out). 160 */ 161 struct ipmi_msg { 162 unsigned char netfn; 163 unsigned char cmd; 164 unsigned short data_len; 165 unsigned char __user *data; 166 }; 167 168 struct kernel_ipmi_msg { 169 unsigned char netfn; 170 unsigned char cmd; 171 unsigned short data_len; 172 unsigned char *data; 173 }; 174 175 /* 176 * Various defines that are useful for IPMI applications. 177 */ 178 #define IPMI_INVALID_CMD_COMPLETION_CODE 0xC1 179 #define IPMI_TIMEOUT_COMPLETION_CODE 0xC3 180 #define IPMI_UNKNOWN_ERR_COMPLETION_CODE 0xff 181 182 183 /* 184 * Receive types for messages coming from the receive interface. This 185 * is used for the receive in-kernel interface and in the receive 186 * IOCTL. 187 * 188 * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but 189 * it allows you to get the message results when you send a response 190 * message. 191 */ 192 #define IPMI_RESPONSE_RECV_TYPE 1 /* A response to a command */ 193 #define IPMI_ASYNC_EVENT_RECV_TYPE 2 /* Something from the event queue */ 194 #define IPMI_CMD_RECV_TYPE 3 /* A command from somewhere else */ 195 #define IPMI_RESPONSE_RESPONSE_TYPE 4 /* The response for 196 a sent response, giving any 197 error status for sending the 198 response. When you send a 199 response message, this will 200 be returned. */ 201 #define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */ 202 203 /* Note that async events and received commands do not have a completion 204 code as the first byte of the incoming data, unlike a response. */ 205 206 207 /* 208 * Modes for ipmi_set_maint_mode() and the userland IOCTL. The AUTO 209 * setting is the default and means it will be set on certain 210 * commands. Hard setting it on and off will override automatic 211 * operation. 212 */ 213 #define IPMI_MAINTENANCE_MODE_AUTO 0 214 #define IPMI_MAINTENANCE_MODE_OFF 1 215 #define IPMI_MAINTENANCE_MODE_ON 2 216 217 #ifdef __KERNEL__ 218 219 /* 220 * The in-kernel interface. 221 */ 222 #include <linux/list.h> 223 #include <linux/module.h> 224 #include <linux/device.h> 225 #include <linux/proc_fs.h> 226 227 /* Opaque type for a IPMI message user. One of these is needed to 228 send and receive messages. */ 229 typedef struct ipmi_user *ipmi_user_t; 230 231 /* 232 * Stuff coming from the receive interface comes as one of these. 233 * They are allocated, the receiver must free them with 234 * ipmi_free_recv_msg() when done with the message. The link is not 235 * used after the message is delivered, so the upper layer may use the 236 * link to build a linked list, if it likes. 237 */ 238 struct ipmi_recv_msg { 239 struct list_head link; 240 241 /* The type of message as defined in the "Receive Types" 242 defines above. */ 243 int recv_type; 244 245 ipmi_user_t user; 246 struct ipmi_addr addr; 247 long msgid; 248 struct kernel_ipmi_msg msg; 249 250 /* The user_msg_data is the data supplied when a message was 251 sent, if this is a response to a sent message. If this is 252 not a response to a sent message, then user_msg_data will 253 be NULL. If the user above is NULL, then this will be the 254 intf. */ 255 void *user_msg_data; 256 257 /* Call this when done with the message. It will presumably free 258 the message and do any other necessary cleanup. */ 259 void (*done)(struct ipmi_recv_msg *msg); 260 261 /* Place-holder for the data, don't make any assumptions about 262 the size or existence of this, since it may change. */ 263 unsigned char msg_data[IPMI_MAX_MSG_LENGTH]; 264 }; 265 266 /* Allocate and free the receive message. */ 267 void ipmi_free_recv_msg(struct ipmi_recv_msg *msg); 268 269 struct ipmi_user_hndl { 270 /* Routine type to call when a message needs to be routed to 271 the upper layer. This will be called with some locks held, 272 the only IPMI routines that can be called are ipmi_request 273 and the alloc/free operations. The handler_data is the 274 variable supplied when the receive handler was registered. */ 275 void (*ipmi_recv_hndl)(struct ipmi_recv_msg *msg, 276 void *user_msg_data); 277 278 /* Called when the interface detects a watchdog pre-timeout. If 279 this is NULL, it will be ignored for the user. */ 280 void (*ipmi_watchdog_pretimeout)(void *handler_data); 281 }; 282 283 /* Create a new user of the IPMI layer on the given interface number. */ 284 int ipmi_create_user(unsigned int if_num, 285 struct ipmi_user_hndl *handler, 286 void *handler_data, 287 ipmi_user_t *user); 288 289 /* Destroy the given user of the IPMI layer. Note that after this 290 function returns, the system is guaranteed to not call any 291 callbacks for the user. Thus as long as you destroy all the users 292 before you unload a module, you will be safe. And if you destroy 293 the users before you destroy the callback structures, it should be 294 safe, too. */ 295 int ipmi_destroy_user(ipmi_user_t user); 296 297 /* Get the IPMI version of the BMC we are talking to. */ 298 void ipmi_get_version(ipmi_user_t user, 299 unsigned char *major, 300 unsigned char *minor); 301 302 /* Set and get the slave address and LUN that we will use for our 303 source messages. Note that this affects the interface, not just 304 this user, so it will affect all users of this interface. This is 305 so some initialization code can come in and do the OEM-specific 306 things it takes to determine your address (if not the BMC) and set 307 it for everyone else. Note that each channel can have its own address. */ 308 int ipmi_set_my_address(ipmi_user_t user, 309 unsigned int channel, 310 unsigned char address); 311 int ipmi_get_my_address(ipmi_user_t user, 312 unsigned int channel, 313 unsigned char *address); 314 int ipmi_set_my_LUN(ipmi_user_t user, 315 unsigned int channel, 316 unsigned char LUN); 317 int ipmi_get_my_LUN(ipmi_user_t user, 318 unsigned int channel, 319 unsigned char *LUN); 320 321 /* 322 * Like ipmi_request, but lets you specify the number of retries and 323 * the retry time. The retries is the number of times the message 324 * will be resent if no reply is received. If set to -1, the default 325 * value will be used. The retry time is the time in milliseconds 326 * between retries. If set to zero, the default value will be 327 * used. 328 * 329 * Don't use this unless you *really* have to. It's primarily for the 330 * IPMI over LAN converter; since the LAN stuff does its own retries, 331 * it makes no sense to do it here. However, this can be used if you 332 * have unusual requirements. 333 */ 334 int ipmi_request_settime(ipmi_user_t user, 335 struct ipmi_addr *addr, 336 long msgid, 337 struct kernel_ipmi_msg *msg, 338 void *user_msg_data, 339 int priority, 340 int max_retries, 341 unsigned int retry_time_ms); 342 343 /* 344 * Like ipmi_request, but with messages supplied. This will not 345 * allocate any memory, and the messages may be statically allocated 346 * (just make sure to do the "done" handling on them). Note that this 347 * is primarily for the watchdog timer, since it should be able to 348 * send messages even if no memory is available. This is subject to 349 * change as the system changes, so don't use it unless you REALLY 350 * have to. 351 */ 352 int ipmi_request_supply_msgs(ipmi_user_t user, 353 struct ipmi_addr *addr, 354 long msgid, 355 struct kernel_ipmi_msg *msg, 356 void *user_msg_data, 357 void *supplied_smi, 358 struct ipmi_recv_msg *supplied_recv, 359 int priority); 360 361 /* 362 * Poll the IPMI interface for the user. This causes the IPMI code to 363 * do an immediate check for information from the driver and handle 364 * anything that is immediately pending. This will not block in any 365 * way. This is useful if you need to spin waiting for something to 366 * happen in the IPMI driver. 367 */ 368 void ipmi_poll_interface(ipmi_user_t user); 369 370 /* 371 * When commands come in to the SMS, the user can register to receive 372 * them. Only one user can be listening on a specific netfn/cmd/chan tuple 373 * at a time, you will get an EBUSY error if the command is already 374 * registered. If a command is received that does not have a user 375 * registered, the driver will automatically return the proper 376 * error. Channels are specified as a bitfield, use IPMI_CHAN_ALL to 377 * mean all channels. 378 */ 379 int ipmi_register_for_cmd(ipmi_user_t user, 380 unsigned char netfn, 381 unsigned char cmd, 382 unsigned int chans); 383 int ipmi_unregister_for_cmd(ipmi_user_t user, 384 unsigned char netfn, 385 unsigned char cmd, 386 unsigned int chans); 387 388 /* 389 * Go into a mode where the driver will not autonomously attempt to do 390 * things with the interface. It will still respond to attentions and 391 * interrupts, and it will expect that commands will complete. It 392 * will not automatcially check for flags, events, or things of that 393 * nature. 394 * 395 * This is primarily used for firmware upgrades. The idea is that 396 * when you go into firmware upgrade mode, you do this operation 397 * and the driver will not attempt to do anything but what you tell 398 * it or what the BMC asks for. 399 * 400 * Note that if you send a command that resets the BMC, the driver 401 * will still expect a response from that command. So the BMC should 402 * reset itself *after* the response is sent. Resetting before the 403 * response is just silly. 404 * 405 * If in auto maintenance mode, the driver will automatically go into 406 * maintenance mode for 30 seconds if it sees a cold reset, a warm 407 * reset, or a firmware NetFN. This means that code that uses only 408 * firmware NetFN commands to do upgrades will work automatically 409 * without change, assuming it sends a message every 30 seconds or 410 * less. 411 * 412 * See the IPMI_MAINTENANCE_MODE_xxx defines for what the mode means. 413 */ 414 int ipmi_get_maintenance_mode(ipmi_user_t user); 415 int ipmi_set_maintenance_mode(ipmi_user_t user, int mode); 416 417 /* 418 * When the user is created, it will not receive IPMI events by 419 * default. The user must set this to TRUE to get incoming events. 420 * The first user that sets this to TRUE will receive all events that 421 * have been queued while no one was waiting for events. 422 */ 423 int ipmi_set_gets_events(ipmi_user_t user, int val); 424 425 /* 426 * Called when a new SMI is registered. This will also be called on 427 * every existing interface when a new watcher is registered with 428 * ipmi_smi_watcher_register(). 429 */ 430 struct ipmi_smi_watcher { 431 struct list_head link; 432 433 /* You must set the owner to the current module, if you are in 434 a module (generally just set it to "THIS_MODULE"). */ 435 struct module *owner; 436 437 /* These two are called with read locks held for the interface 438 the watcher list. So you can add and remove users from the 439 IPMI interface, send messages, etc., but you cannot add 440 or remove SMI watchers or SMI interfaces. */ 441 void (*new_smi)(int if_num, struct device *dev); 442 void (*smi_gone)(int if_num); 443 }; 444 445 int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher); 446 int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher); 447 448 /* The following are various helper functions for dealing with IPMI 449 addresses. */ 450 451 /* Return the maximum length of an IPMI address given it's type. */ 452 unsigned int ipmi_addr_length(int addr_type); 453 454 /* Validate that the given IPMI address is valid. */ 455 int ipmi_validate_addr(struct ipmi_addr *addr, int len); 456 457 /* 458 * How did the IPMI driver find out about the device? 459 */ 460 enum ipmi_addr_src { 461 SI_INVALID = 0, SI_HOTMOD, SI_HARDCODED, SI_SPMI, SI_ACPI, SI_SMBIOS, 462 SI_PCI, SI_DEVICETREE, SI_DEFAULT 463 }; 464 465 union ipmi_smi_info_union { 466 /* 467 * the acpi_info element is defined for the SI_ACPI 468 * address type 469 */ 470 struct { 471 void *acpi_handle; 472 } acpi_info; 473 }; 474 475 struct ipmi_smi_info { 476 enum ipmi_addr_src addr_src; 477 478 /* 479 * Base device for the interface. Don't forget to put this when 480 * you are done. 481 */ 482 struct device *dev; 483 484 /* 485 * The addr_info provides more detailed info for some IPMI 486 * devices, depending on the addr_src. Currently only SI_ACPI 487 * info is provided. 488 */ 489 union ipmi_smi_info_union addr_info; 490 }; 491 492 /* This is to get the private info of ipmi_smi_t */ 493 extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data); 494 495 #endif /* __KERNEL__ */ 496 497 498 /* 499 * The userland interface 500 */ 501 502 /* 503 * The userland interface for the IPMI driver is a standard character 504 * device, with each instance of an interface registered as a minor 505 * number under the major character device. 506 * 507 * The read and write calls do not work, to get messages in and out 508 * requires ioctl calls because of the complexity of the data. select 509 * and poll do work, so you can wait for input using the file 510 * descriptor, you just can use read to get it. 511 * 512 * In general, you send a command down to the interface and receive 513 * responses back. You can use the msgid value to correlate commands 514 * and responses, the driver will take care of figuring out which 515 * incoming messages are for which command and find the proper msgid 516 * value to report. You will only receive reponses for commands you 517 * send. Asynchronous events, however, go to all open users, so you 518 * must be ready to handle these (or ignore them if you don't care). 519 * 520 * The address type depends upon the channel type. When talking 521 * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored 522 * (IPMI_UNUSED_ADDR_TYPE). When talking to an IPMB channel, you must 523 * supply a valid IPMB address with the addr_type set properly. 524 * 525 * When talking to normal channels, the driver takes care of the 526 * details of formatting and sending messages on that channel. You do 527 * not, for instance, have to format a send command, you just send 528 * whatever command you want to the channel, the driver will create 529 * the send command, automatically issue receive command and get even 530 * commands, and pass those up to the proper user. 531 */ 532 533 534 /* The magic IOCTL value for this interface. */ 535 #define IPMI_IOC_MAGIC 'i' 536 537 538 /* Messages sent to the interface are this format. */ 539 struct ipmi_req { 540 unsigned char __user *addr; /* Address to send the message to. */ 541 unsigned int addr_len; 542 543 long msgid; /* The sequence number for the message. This 544 exact value will be reported back in the 545 response to this request if it is a command. 546 If it is a response, this will be used as 547 the sequence value for the response. */ 548 549 struct ipmi_msg msg; 550 }; 551 /* 552 * Send a message to the interfaces. error values are: 553 * - EFAULT - an address supplied was invalid. 554 * - EINVAL - The address supplied was not valid, or the command 555 * was not allowed. 556 * - EMSGSIZE - The message to was too large. 557 * - ENOMEM - Buffers could not be allocated for the command. 558 */ 559 #define IPMICTL_SEND_COMMAND _IOR(IPMI_IOC_MAGIC, 13, \ 560 struct ipmi_req) 561 562 /* Messages sent to the interface with timing parameters are this 563 format. */ 564 struct ipmi_req_settime { 565 struct ipmi_req req; 566 567 /* See ipmi_request_settime() above for details on these 568 values. */ 569 int retries; 570 unsigned int retry_time_ms; 571 }; 572 /* 573 * Send a message to the interfaces with timing parameters. error values 574 * are: 575 * - EFAULT - an address supplied was invalid. 576 * - EINVAL - The address supplied was not valid, or the command 577 * was not allowed. 578 * - EMSGSIZE - The message to was too large. 579 * - ENOMEM - Buffers could not be allocated for the command. 580 */ 581 #define IPMICTL_SEND_COMMAND_SETTIME _IOR(IPMI_IOC_MAGIC, 21, \ 582 struct ipmi_req_settime) 583 584 /* Messages received from the interface are this format. */ 585 struct ipmi_recv { 586 int recv_type; /* Is this a command, response or an 587 asyncronous event. */ 588 589 unsigned char __user *addr; /* Address the message was from is put 590 here. The caller must supply the 591 memory. */ 592 unsigned int addr_len; /* The size of the address buffer. 593 The caller supplies the full buffer 594 length, this value is updated to 595 the actual message length when the 596 message is received. */ 597 598 long msgid; /* The sequence number specified in the request 599 if this is a response. If this is a command, 600 this will be the sequence number from the 601 command. */ 602 603 struct ipmi_msg msg; /* The data field must point to a buffer. 604 The data_size field must be set to the 605 size of the message buffer. The 606 caller supplies the full buffer 607 length, this value is updated to the 608 actual message length when the message 609 is received. */ 610 }; 611 612 /* 613 * Receive a message. error values: 614 * - EAGAIN - no messages in the queue. 615 * - EFAULT - an address supplied was invalid. 616 * - EINVAL - The address supplied was not valid. 617 * - EMSGSIZE - The message to was too large to fit into the message buffer, 618 * the message will be left in the buffer. */ 619 #define IPMICTL_RECEIVE_MSG _IOWR(IPMI_IOC_MAGIC, 12, \ 620 struct ipmi_recv) 621 622 /* 623 * Like RECEIVE_MSG, but if the message won't fit in the buffer, it 624 * will truncate the contents instead of leaving the data in the 625 * buffer. 626 */ 627 #define IPMICTL_RECEIVE_MSG_TRUNC _IOWR(IPMI_IOC_MAGIC, 11, \ 628 struct ipmi_recv) 629 630 /* Register to get commands from other entities on this interface. */ 631 struct ipmi_cmdspec { 632 unsigned char netfn; 633 unsigned char cmd; 634 }; 635 636 /* 637 * Register to receive a specific command. error values: 638 * - EFAULT - an address supplied was invalid. 639 * - EBUSY - The netfn/cmd supplied was already in use. 640 * - ENOMEM - could not allocate memory for the entry. 641 */ 642 #define IPMICTL_REGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 14, \ 643 struct ipmi_cmdspec) 644 /* 645 * Unregister a regsitered command. error values: 646 * - EFAULT - an address supplied was invalid. 647 * - ENOENT - The netfn/cmd was not found registered for this user. 648 */ 649 #define IPMICTL_UNREGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 15, \ 650 struct ipmi_cmdspec) 651 652 /* 653 * Register to get commands from other entities on specific channels. 654 * This way, you can only listen on specific channels, or have messages 655 * from some channels go to one place and other channels to someplace 656 * else. The chans field is a bitmask, (1 << channel) for each channel. 657 * It may be IPMI_CHAN_ALL for all channels. 658 */ 659 struct ipmi_cmdspec_chans { 660 unsigned int netfn; 661 unsigned int cmd; 662 unsigned int chans; 663 }; 664 665 /* 666 * Register to receive a specific command on specific channels. error values: 667 * - EFAULT - an address supplied was invalid. 668 * - EBUSY - One of the netfn/cmd/chans supplied was already in use. 669 * - ENOMEM - could not allocate memory for the entry. 670 */ 671 #define IPMICTL_REGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 28, \ 672 struct ipmi_cmdspec_chans) 673 /* 674 * Unregister some netfn/cmd/chans. error values: 675 * - EFAULT - an address supplied was invalid. 676 * - ENOENT - None of the netfn/cmd/chans were found registered for this user. 677 */ 678 #define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29, \ 679 struct ipmi_cmdspec_chans) 680 681 /* 682 * Set whether this interface receives events. Note that the first 683 * user registered for events will get all pending events for the 684 * interface. error values: 685 * - EFAULT - an address supplied was invalid. 686 */ 687 #define IPMICTL_SET_GETS_EVENTS_CMD _IOR(IPMI_IOC_MAGIC, 16, int) 688 689 /* 690 * Set and get the slave address and LUN that we will use for our 691 * source messages. Note that this affects the interface, not just 692 * this user, so it will affect all users of this interface. This is 693 * so some initialization code can come in and do the OEM-specific 694 * things it takes to determine your address (if not the BMC) and set 695 * it for everyone else. You should probably leave the LUN alone. 696 */ 697 struct ipmi_channel_lun_address_set { 698 unsigned short channel; 699 unsigned char value; 700 }; 701 #define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \ 702 _IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set) 703 #define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \ 704 _IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set) 705 #define IPMICTL_SET_MY_CHANNEL_LUN_CMD \ 706 _IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set) 707 #define IPMICTL_GET_MY_CHANNEL_LUN_CMD \ 708 _IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set) 709 /* Legacy interfaces, these only set IPMB 0. */ 710 #define IPMICTL_SET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 17, unsigned int) 711 #define IPMICTL_GET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 18, unsigned int) 712 #define IPMICTL_SET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 19, unsigned int) 713 #define IPMICTL_GET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 20, unsigned int) 714 715 /* 716 * Get/set the default timing values for an interface. You shouldn't 717 * generally mess with these. 718 */ 719 struct ipmi_timing_parms { 720 int retries; 721 unsigned int retry_time_ms; 722 }; 723 #define IPMICTL_SET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 22, \ 724 struct ipmi_timing_parms) 725 #define IPMICTL_GET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 23, \ 726 struct ipmi_timing_parms) 727 728 /* 729 * Set the maintenance mode. See ipmi_set_maintenance_mode() above 730 * for a description of what this does. 731 */ 732 #define IPMICTL_GET_MAINTENANCE_MODE_CMD _IOR(IPMI_IOC_MAGIC, 30, int) 733 #define IPMICTL_SET_MAINTENANCE_MODE_CMD _IOW(IPMI_IOC_MAGIC, 31, int) 734 735 #endif /* __LINUX_IPMI_H */ 736