1 /****************************************************************************** 2 * 3 * This file is provided under a dual BSD/GPLv2 license. When using or 4 * redistributing this file, you may do so under either license. 5 * 6 * GPL LICENSE SUMMARY 7 * 8 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of version 2 of the GNU General Public License as 12 * published by the Free Software Foundation. 13 * 14 * This program is distributed in the hope that it will be useful, but 15 * WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 17 * General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, 22 * USA 23 * 24 * The full GNU General Public License is included in this distribution 25 * in the file called LICENSE.GPL. 26 * 27 * Contact Information: 28 * Intel Linux Wireless <ilw@linux.intel.com> 29 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 30 * 31 * BSD LICENSE 32 * 33 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. 34 * All rights reserved. 35 * 36 * Redistribution and use in source and binary forms, with or without 37 * modification, are permitted provided that the following conditions 38 * are met: 39 * 40 * * Redistributions of source code must retain the above copyright 41 * notice, this list of conditions and the following disclaimer. 42 * * Redistributions in binary form must reproduce the above copyright 43 * notice, this list of conditions and the following disclaimer in 44 * the documentation and/or other materials provided with the 45 * distribution. 46 * * Neither the name Intel Corporation nor the names of its 47 * contributors may be used to endorse or promote products derived 48 * from this software without specific prior written permission. 49 * 50 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 51 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 52 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 53 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 54 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 55 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 56 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 57 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 58 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 59 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 60 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 61 * 62 *****************************************************************************/ 63 64 #ifndef __il_commands_h__ 65 #define __il_commands_h__ 66 67 #include <linux/ieee80211.h> 68 69 struct il_priv; 70 71 /* uCode version contains 4 values: Major/Minor/API/Serial */ 72 #define IL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) 73 #define IL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) 74 #define IL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) 75 #define IL_UCODE_SERIAL(ver) ((ver) & 0x000000FF) 76 77 /* Tx rates */ 78 #define IL_CCK_RATES 4 79 #define IL_OFDM_RATES 8 80 #define IL_MAX_RATES (IL_CCK_RATES + IL_OFDM_RATES) 81 82 enum { 83 N_ALIVE = 0x1, 84 N_ERROR = 0x2, 85 86 /* RXON and QOS commands */ 87 C_RXON = 0x10, 88 C_RXON_ASSOC = 0x11, 89 C_QOS_PARAM = 0x13, 90 C_RXON_TIMING = 0x14, 91 92 /* Multi-Station support */ 93 C_ADD_STA = 0x18, 94 C_REM_STA = 0x19, 95 96 /* Security */ 97 C_WEPKEY = 0x20, 98 99 /* RX, TX, LEDs */ 100 N_3945_RX = 0x1b, /* 3945 only */ 101 C_TX = 0x1c, 102 C_RATE_SCALE = 0x47, /* 3945 only */ 103 C_LEDS = 0x48, 104 C_TX_LINK_QUALITY_CMD = 0x4e, /* for 4965 */ 105 106 /* 802.11h related */ 107 C_CHANNEL_SWITCH = 0x72, 108 N_CHANNEL_SWITCH = 0x73, 109 C_SPECTRUM_MEASUREMENT = 0x74, 110 N_SPECTRUM_MEASUREMENT = 0x75, 111 112 /* Power Management */ 113 C_POWER_TBL = 0x77, 114 N_PM_SLEEP = 0x7A, 115 N_PM_DEBUG_STATS = 0x7B, 116 117 /* Scan commands and notifications */ 118 C_SCAN = 0x80, 119 C_SCAN_ABORT = 0x81, 120 N_SCAN_START = 0x82, 121 N_SCAN_RESULTS = 0x83, 122 N_SCAN_COMPLETE = 0x84, 123 124 /* IBSS/AP commands */ 125 N_BEACON = 0x90, 126 C_TX_BEACON = 0x91, 127 128 /* Miscellaneous commands */ 129 C_TX_PWR_TBL = 0x97, 130 131 /* Bluetooth device coexistence config command */ 132 C_BT_CONFIG = 0x9b, 133 134 /* Statistics */ 135 C_STATS = 0x9c, 136 N_STATS = 0x9d, 137 138 /* RF-KILL commands and notifications */ 139 N_CARD_STATE = 0xa1, 140 141 /* Missed beacons notification */ 142 N_MISSED_BEACONS = 0xa2, 143 144 C_CT_KILL_CONFIG = 0xa4, 145 C_SENSITIVITY = 0xa8, 146 C_PHY_CALIBRATION = 0xb0, 147 N_RX_PHY = 0xc0, 148 N_RX_MPDU = 0xc1, 149 N_RX = 0xc3, 150 N_COMPRESSED_BA = 0xc5, 151 152 IL_CN_MAX = 0xff 153 }; 154 155 /****************************************************************************** 156 * (0) 157 * Commonly used structures and definitions: 158 * Command header, rate_n_flags, txpower 159 * 160 *****************************************************************************/ 161 162 /* il_cmd_header flags value */ 163 #define IL_CMD_FAILED_MSK 0x40 164 165 #define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f) 166 #define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8) 167 #define SEQ_TO_IDX(s) ((s) & 0xff) 168 #define IDX_TO_SEQ(i) ((i) & 0xff) 169 #define SEQ_HUGE_FRAME cpu_to_le16(0x4000) 170 #define SEQ_RX_FRAME cpu_to_le16(0x8000) 171 172 /** 173 * struct il_cmd_header 174 * 175 * This header format appears in the beginning of each command sent from the 176 * driver, and each response/notification received from uCode. 177 */ 178 struct il_cmd_header { 179 u8 cmd; /* Command ID: C_RXON, etc. */ 180 u8 flags; /* 0:5 reserved, 6 abort, 7 internal */ 181 /* 182 * The driver sets up the sequence number to values of its choosing. 183 * uCode does not use this value, but passes it back to the driver 184 * when sending the response to each driver-originated command, so 185 * the driver can match the response to the command. Since the values 186 * don't get used by uCode, the driver may set up an arbitrary format. 187 * 188 * There is one exception: uCode sets bit 15 when it originates 189 * the response/notification, i.e. when the response/notification 190 * is not a direct response to a command sent by the driver. For 191 * example, uCode issues N_3945_RX when it sends a received frame 192 * to the driver; it is not a direct response to any driver command. 193 * 194 * The Linux driver uses the following format: 195 * 196 * 0:7 tfd idx - position within TX queue 197 * 8:12 TX queue id 198 * 13 reserved 199 * 14 huge - driver sets this to indicate command is in the 200 * 'huge' storage at the end of the command buffers 201 * 15 unsolicited RX or uCode-originated notification 202 */ 203 __le16 sequence; 204 205 /* command or response/notification data follows immediately */ 206 u8 data[]; 207 } __packed; 208 209 /** 210 * struct il3945_tx_power 211 * 212 * Used in C_TX_PWR_TBL, C_SCAN, C_CHANNEL_SWITCH 213 * 214 * Each entry contains two values: 215 * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained 216 * linear value that multiplies the output of the digital signal processor, 217 * before being sent to the analog radio. 218 * 2) Radio gain. This sets the analog gain of the radio Tx path. 219 * It is a coarser setting, and behaves in a logarithmic (dB) fashion. 220 * 221 * Driver obtains values from struct il3945_tx_power power_gain_table[][]. 222 */ 223 struct il3945_tx_power { 224 u8 tx_gain; /* gain for analog radio */ 225 u8 dsp_atten; /* gain for DSP */ 226 } __packed; 227 228 /** 229 * struct il3945_power_per_rate 230 * 231 * Used in C_TX_PWR_TBL, C_CHANNEL_SWITCH 232 */ 233 struct il3945_power_per_rate { 234 u8 rate; /* plcp */ 235 struct il3945_tx_power tpc; 236 u8 reserved; 237 } __packed; 238 239 /** 240 * iwl4965 rate_n_flags bit fields 241 * 242 * rate_n_flags format is used in following iwl4965 commands: 243 * N_RX (response only) 244 * N_RX_MPDU (response only) 245 * C_TX (both command and response) 246 * C_TX_LINK_QUALITY_CMD 247 * 248 * High-throughput (HT) rate format for bits 7:0 (bit 8 must be "1"): 249 * 2-0: 0) 6 Mbps 250 * 1) 12 Mbps 251 * 2) 18 Mbps 252 * 3) 24 Mbps 253 * 4) 36 Mbps 254 * 5) 48 Mbps 255 * 6) 54 Mbps 256 * 7) 60 Mbps 257 * 258 * 4-3: 0) Single stream (SISO) 259 * 1) Dual stream (MIMO) 260 * 2) Triple stream (MIMO) 261 * 262 * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data 263 * 264 * Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"): 265 * 3-0: 0xD) 6 Mbps 266 * 0xF) 9 Mbps 267 * 0x5) 12 Mbps 268 * 0x7) 18 Mbps 269 * 0x9) 24 Mbps 270 * 0xB) 36 Mbps 271 * 0x1) 48 Mbps 272 * 0x3) 54 Mbps 273 * 274 * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"): 275 * 6-0: 10) 1 Mbps 276 * 20) 2 Mbps 277 * 55) 5.5 Mbps 278 * 110) 11 Mbps 279 */ 280 #define RATE_MCS_CODE_MSK 0x7 281 #define RATE_MCS_SPATIAL_POS 3 282 #define RATE_MCS_SPATIAL_MSK 0x18 283 #define RATE_MCS_HT_DUP_POS 5 284 #define RATE_MCS_HT_DUP_MSK 0x20 285 286 /* Bit 8: (1) HT format, (0) legacy format in bits 7:0 */ 287 #define RATE_MCS_FLAGS_POS 8 288 #define RATE_MCS_HT_POS 8 289 #define RATE_MCS_HT_MSK 0x100 290 291 /* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ 292 #define RATE_MCS_CCK_POS 9 293 #define RATE_MCS_CCK_MSK 0x200 294 295 /* Bit 10: (1) Use Green Field preamble */ 296 #define RATE_MCS_GF_POS 10 297 #define RATE_MCS_GF_MSK 0x400 298 299 /* Bit 11: (1) Use 40Mhz HT40 chnl width, (0) use 20 MHz legacy chnl width */ 300 #define RATE_MCS_HT40_POS 11 301 #define RATE_MCS_HT40_MSK 0x800 302 303 /* Bit 12: (1) Duplicate data on both 20MHz chnls. HT40 (bit 11) must be set. */ 304 #define RATE_MCS_DUP_POS 12 305 #define RATE_MCS_DUP_MSK 0x1000 306 307 /* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ 308 #define RATE_MCS_SGI_POS 13 309 #define RATE_MCS_SGI_MSK 0x2000 310 311 /** 312 * rate_n_flags Tx antenna masks 313 * 4965 has 2 transmitters 314 * bit14:16 315 */ 316 #define RATE_MCS_ANT_POS 14 317 #define RATE_MCS_ANT_A_MSK 0x04000 318 #define RATE_MCS_ANT_B_MSK 0x08000 319 #define RATE_MCS_ANT_C_MSK 0x10000 320 #define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | RATE_MCS_ANT_B_MSK) 321 #define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | RATE_MCS_ANT_C_MSK) 322 #define RATE_ANT_NUM 3 323 324 #define POWER_TBL_NUM_ENTRIES 33 325 #define POWER_TBL_NUM_HT_OFDM_ENTRIES 32 326 #define POWER_TBL_CCK_ENTRY 32 327 328 #define IL_PWR_NUM_HT_OFDM_ENTRIES 24 329 #define IL_PWR_CCK_ENTRIES 2 330 331 /** 332 * union il4965_tx_power_dual_stream 333 * 334 * Host format used for C_TX_PWR_TBL, C_CHANNEL_SWITCH 335 * Use __le32 version (struct tx_power_dual_stream) when building command. 336 * 337 * Driver provides radio gain and DSP attenuation settings to device in pairs, 338 * one value for each transmitter chain. The first value is for transmitter A, 339 * second for transmitter B. 340 * 341 * For SISO bit rates, both values in a pair should be identical. 342 * For MIMO rates, one value may be different from the other, 343 * in order to balance the Tx output between the two transmitters. 344 * 345 * See more details in doc for TXPOWER in 4965.h. 346 */ 347 union il4965_tx_power_dual_stream { 348 struct { 349 u8 radio_tx_gain[2]; 350 u8 dsp_predis_atten[2]; 351 } s; 352 u32 dw; 353 }; 354 355 /** 356 * struct tx_power_dual_stream 357 * 358 * Table entries in C_TX_PWR_TBL, C_CHANNEL_SWITCH 359 * 360 * Same format as il_tx_power_dual_stream, but __le32 361 */ 362 struct tx_power_dual_stream { 363 __le32 dw; 364 } __packed; 365 366 /** 367 * struct il4965_tx_power_db 368 * 369 * Entire table within C_TX_PWR_TBL, C_CHANNEL_SWITCH 370 */ 371 struct il4965_tx_power_db { 372 struct tx_power_dual_stream power_tbl[POWER_TBL_NUM_ENTRIES]; 373 } __packed; 374 375 /****************************************************************************** 376 * (0a) 377 * Alive and Error Commands & Responses: 378 * 379 *****************************************************************************/ 380 381 #define UCODE_VALID_OK cpu_to_le32(0x1) 382 #define INITIALIZE_SUBTYPE (9) 383 384 /* 385 * ("Initialize") N_ALIVE = 0x1 (response only, not a command) 386 * 387 * uCode issues this "initialize alive" notification once the initialization 388 * uCode image has completed its work, and is ready to load the runtime image. 389 * This is the *first* "alive" notification that the driver will receive after 390 * rebooting uCode; the "initialize" alive is indicated by subtype field == 9. 391 * 392 * See comments documenting "BSM" (bootstrap state machine). 393 * 394 * For 4965, this notification contains important calibration data for 395 * calculating txpower settings: 396 * 397 * 1) Power supply voltage indication. The voltage sensor outputs higher 398 * values for lower voltage, and vice verse. 399 * 400 * 2) Temperature measurement parameters, for each of two channel widths 401 * (20 MHz and 40 MHz) supported by the radios. Temperature sensing 402 * is done via one of the receiver chains, and channel width influences 403 * the results. 404 * 405 * 3) Tx gain compensation to balance 4965's 2 Tx chains for MIMO operation, 406 * for each of 5 frequency ranges. 407 */ 408 struct il_init_alive_resp { 409 u8 ucode_minor; 410 u8 ucode_major; 411 __le16 reserved1; 412 u8 sw_rev[8]; 413 u8 ver_type; 414 u8 ver_subtype; /* "9" for initialize alive */ 415 __le16 reserved2; 416 __le32 log_event_table_ptr; 417 __le32 error_event_table_ptr; 418 __le32 timestamp; 419 __le32 is_valid; 420 421 /* calibration values from "initialize" uCode */ 422 __le32 voltage; /* signed, higher value is lower voltage */ 423 __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for HT40 */ 424 __le32 therm_r2[2]; /* signed */ 425 __le32 therm_r3[2]; /* signed */ 426 __le32 therm_r4[2]; /* signed */ 427 __le32 tx_atten[5][2]; /* signed MIMO gain comp, 5 freq groups, 428 * 2 Tx chains */ 429 } __packed; 430 431 /** 432 * N_ALIVE = 0x1 (response only, not a command) 433 * 434 * uCode issues this "alive" notification once the runtime image is ready 435 * to receive commands from the driver. This is the *second* "alive" 436 * notification that the driver will receive after rebooting uCode; 437 * this "alive" is indicated by subtype field != 9. 438 * 439 * See comments documenting "BSM" (bootstrap state machine). 440 * 441 * This response includes two pointers to structures within the device's 442 * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging: 443 * 444 * 1) log_event_table_ptr indicates base of the event log. This traces 445 * a 256-entry history of uCode execution within a circular buffer. 446 * Its header format is: 447 * 448 * __le32 log_size; log capacity (in number of entries) 449 * __le32 type; (1) timestamp with each entry, (0) no timestamp 450 * __le32 wraps; # times uCode has wrapped to top of circular buffer 451 * __le32 write_idx; next circular buffer entry that uCode would fill 452 * 453 * The header is followed by the circular buffer of log entries. Entries 454 * with timestamps have the following format: 455 * 456 * __le32 event_id; range 0 - 1500 457 * __le32 timestamp; low 32 bits of TSF (of network, if associated) 458 * __le32 data; event_id-specific data value 459 * 460 * Entries without timestamps contain only event_id and data. 461 * 462 * 463 * 2) error_event_table_ptr indicates base of the error log. This contains 464 * information about any uCode error that occurs. For 4965, the format 465 * of the error log is: 466 * 467 * __le32 valid; (nonzero) valid, (0) log is empty 468 * __le32 error_id; type of error 469 * __le32 pc; program counter 470 * __le32 blink1; branch link 471 * __le32 blink2; branch link 472 * __le32 ilink1; interrupt link 473 * __le32 ilink2; interrupt link 474 * __le32 data1; error-specific data 475 * __le32 data2; error-specific data 476 * __le32 line; source code line of error 477 * __le32 bcon_time; beacon timer 478 * __le32 tsf_low; network timestamp function timer 479 * __le32 tsf_hi; network timestamp function timer 480 * __le32 gp1; GP1 timer register 481 * __le32 gp2; GP2 timer register 482 * __le32 gp3; GP3 timer register 483 * __le32 ucode_ver; uCode version 484 * __le32 hw_ver; HW Silicon version 485 * __le32 brd_ver; HW board version 486 * __le32 log_pc; log program counter 487 * __le32 frame_ptr; frame pointer 488 * __le32 stack_ptr; stack pointer 489 * __le32 hcmd; last host command 490 * __le32 isr0; isr status register LMPM_NIC_ISR0: rxtx_flag 491 * __le32 isr1; isr status register LMPM_NIC_ISR1: host_flag 492 * __le32 isr2; isr status register LMPM_NIC_ISR2: enc_flag 493 * __le32 isr3; isr status register LMPM_NIC_ISR3: time_flag 494 * __le32 isr4; isr status register LMPM_NIC_ISR4: wico interrupt 495 * __le32 isr_pref; isr status register LMPM_NIC_PREF_STAT 496 * __le32 wait_event; wait event() caller address 497 * __le32 l2p_control; L2pControlField 498 * __le32 l2p_duration; L2pDurationField 499 * __le32 l2p_mhvalid; L2pMhValidBits 500 * __le32 l2p_addr_match; L2pAddrMatchStat 501 * __le32 lmpm_pmg_sel; indicate which clocks are turned on (LMPM_PMG_SEL) 502 * __le32 u_timestamp; indicate when the date and time of the compilation 503 * __le32 reserved; 504 * 505 * The Linux driver can print both logs to the system log when a uCode error 506 * occurs. 507 */ 508 struct il_alive_resp { 509 u8 ucode_minor; 510 u8 ucode_major; 511 __le16 reserved1; 512 u8 sw_rev[8]; 513 u8 ver_type; 514 u8 ver_subtype; /* not "9" for runtime alive */ 515 __le16 reserved2; 516 __le32 log_event_table_ptr; /* SRAM address for event log */ 517 __le32 error_event_table_ptr; /* SRAM address for error log */ 518 __le32 timestamp; 519 __le32 is_valid; 520 } __packed; 521 522 /* 523 * N_ERROR = 0x2 (response only, not a command) 524 */ 525 struct il_error_resp { 526 __le32 error_type; 527 u8 cmd_id; 528 u8 reserved1; 529 __le16 bad_cmd_seq_num; 530 __le32 error_info; 531 __le64 timestamp; 532 } __packed; 533 534 /****************************************************************************** 535 * (1) 536 * RXON Commands & Responses: 537 * 538 *****************************************************************************/ 539 540 /* 541 * Rx config defines & structure 542 */ 543 /* rx_config device types */ 544 enum { 545 RXON_DEV_TYPE_AP = 1, 546 RXON_DEV_TYPE_ESS = 3, 547 RXON_DEV_TYPE_IBSS = 4, 548 RXON_DEV_TYPE_SNIFFER = 6, 549 }; 550 551 #define RXON_RX_CHAIN_DRIVER_FORCE_MSK cpu_to_le16(0x1 << 0) 552 #define RXON_RX_CHAIN_DRIVER_FORCE_POS (0) 553 #define RXON_RX_CHAIN_VALID_MSK cpu_to_le16(0x7 << 1) 554 #define RXON_RX_CHAIN_VALID_POS (1) 555 #define RXON_RX_CHAIN_FORCE_SEL_MSK cpu_to_le16(0x7 << 4) 556 #define RXON_RX_CHAIN_FORCE_SEL_POS (4) 557 #define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK cpu_to_le16(0x7 << 7) 558 #define RXON_RX_CHAIN_FORCE_MIMO_SEL_POS (7) 559 #define RXON_RX_CHAIN_CNT_MSK cpu_to_le16(0x3 << 10) 560 #define RXON_RX_CHAIN_CNT_POS (10) 561 #define RXON_RX_CHAIN_MIMO_CNT_MSK cpu_to_le16(0x3 << 12) 562 #define RXON_RX_CHAIN_MIMO_CNT_POS (12) 563 #define RXON_RX_CHAIN_MIMO_FORCE_MSK cpu_to_le16(0x1 << 14) 564 #define RXON_RX_CHAIN_MIMO_FORCE_POS (14) 565 566 /* rx_config flags */ 567 /* band & modulation selection */ 568 #define RXON_FLG_BAND_24G_MSK cpu_to_le32(1 << 0) 569 #define RXON_FLG_CCK_MSK cpu_to_le32(1 << 1) 570 /* auto detection enable */ 571 #define RXON_FLG_AUTO_DETECT_MSK cpu_to_le32(1 << 2) 572 /* TGg protection when tx */ 573 #define RXON_FLG_TGG_PROTECT_MSK cpu_to_le32(1 << 3) 574 /* cck short slot & preamble */ 575 #define RXON_FLG_SHORT_SLOT_MSK cpu_to_le32(1 << 4) 576 #define RXON_FLG_SHORT_PREAMBLE_MSK cpu_to_le32(1 << 5) 577 /* antenna selection */ 578 #define RXON_FLG_DIS_DIV_MSK cpu_to_le32(1 << 7) 579 #define RXON_FLG_ANT_SEL_MSK cpu_to_le32(0x0f00) 580 #define RXON_FLG_ANT_A_MSK cpu_to_le32(1 << 8) 581 #define RXON_FLG_ANT_B_MSK cpu_to_le32(1 << 9) 582 /* radar detection enable */ 583 #define RXON_FLG_RADAR_DETECT_MSK cpu_to_le32(1 << 12) 584 #define RXON_FLG_TGJ_NARROW_BAND_MSK cpu_to_le32(1 << 13) 585 /* rx response to host with 8-byte TSF 586 * (according to ON_AIR deassertion) */ 587 #define RXON_FLG_TSF2HOST_MSK cpu_to_le32(1 << 15) 588 589 /* HT flags */ 590 #define RXON_FLG_CTRL_CHANNEL_LOC_POS (22) 591 #define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK cpu_to_le32(0x1 << 22) 592 593 #define RXON_FLG_HT_OPERATING_MODE_POS (23) 594 595 #define RXON_FLG_HT_PROT_MSK cpu_to_le32(0x1 << 23) 596 #define RXON_FLG_HT40_PROT_MSK cpu_to_le32(0x2 << 23) 597 598 #define RXON_FLG_CHANNEL_MODE_POS (25) 599 #define RXON_FLG_CHANNEL_MODE_MSK cpu_to_le32(0x3 << 25) 600 601 /* channel mode */ 602 enum { 603 CHANNEL_MODE_LEGACY = 0, 604 CHANNEL_MODE_PURE_40 = 1, 605 CHANNEL_MODE_MIXED = 2, 606 CHANNEL_MODE_RESERVED = 3, 607 }; 608 #define RXON_FLG_CHANNEL_MODE_LEGACY \ 609 cpu_to_le32(CHANNEL_MODE_LEGACY << RXON_FLG_CHANNEL_MODE_POS) 610 #define RXON_FLG_CHANNEL_MODE_PURE_40 \ 611 cpu_to_le32(CHANNEL_MODE_PURE_40 << RXON_FLG_CHANNEL_MODE_POS) 612 #define RXON_FLG_CHANNEL_MODE_MIXED \ 613 cpu_to_le32(CHANNEL_MODE_MIXED << RXON_FLG_CHANNEL_MODE_POS) 614 615 /* CTS to self (if spec allows) flag */ 616 #define RXON_FLG_SELF_CTS_EN cpu_to_le32(0x1<<30) 617 618 /* rx_config filter flags */ 619 /* accept all data frames */ 620 #define RXON_FILTER_PROMISC_MSK cpu_to_le32(1 << 0) 621 /* pass control & management to host */ 622 #define RXON_FILTER_CTL2HOST_MSK cpu_to_le32(1 << 1) 623 /* accept multi-cast */ 624 #define RXON_FILTER_ACCEPT_GRP_MSK cpu_to_le32(1 << 2) 625 /* don't decrypt uni-cast frames */ 626 #define RXON_FILTER_DIS_DECRYPT_MSK cpu_to_le32(1 << 3) 627 /* don't decrypt multi-cast frames */ 628 #define RXON_FILTER_DIS_GRP_DECRYPT_MSK cpu_to_le32(1 << 4) 629 /* STA is associated */ 630 #define RXON_FILTER_ASSOC_MSK cpu_to_le32(1 << 5) 631 /* transfer to host non bssid beacons in associated state */ 632 #define RXON_FILTER_BCON_AWARE_MSK cpu_to_le32(1 << 6) 633 634 /** 635 * C_RXON = 0x10 (command, has simple generic response) 636 * 637 * RXON tunes the radio tuner to a service channel, and sets up a number 638 * of parameters that are used primarily for Rx, but also for Tx operations. 639 * 640 * NOTE: When tuning to a new channel, driver must set the 641 * RXON_FILTER_ASSOC_MSK to 0. This will clear station-dependent 642 * info within the device, including the station tables, tx retry 643 * rate tables, and txpower tables. Driver must build a new station 644 * table and txpower table before transmitting anything on the RXON 645 * channel. 646 * 647 * NOTE: All RXONs wipe clean the internal txpower table. Driver must 648 * issue a new C_TX_PWR_TBL after each C_RXON (0x10), 649 * regardless of whether RXON_FILTER_ASSOC_MSK is set. 650 */ 651 652 struct il3945_rxon_cmd { 653 u8 node_addr[6]; 654 __le16 reserved1; 655 u8 bssid_addr[6]; 656 __le16 reserved2; 657 u8 wlap_bssid_addr[6]; 658 __le16 reserved3; 659 u8 dev_type; 660 u8 air_propagation; 661 __le16 reserved4; 662 u8 ofdm_basic_rates; 663 u8 cck_basic_rates; 664 __le16 assoc_id; 665 __le32 flags; 666 __le32 filter_flags; 667 __le16 channel; 668 __le16 reserved5; 669 } __packed; 670 671 struct il4965_rxon_cmd { 672 u8 node_addr[6]; 673 __le16 reserved1; 674 u8 bssid_addr[6]; 675 __le16 reserved2; 676 u8 wlap_bssid_addr[6]; 677 __le16 reserved3; 678 u8 dev_type; 679 u8 air_propagation; 680 __le16 rx_chain; 681 u8 ofdm_basic_rates; 682 u8 cck_basic_rates; 683 __le16 assoc_id; 684 __le32 flags; 685 __le32 filter_flags; 686 __le16 channel; 687 u8 ofdm_ht_single_stream_basic_rates; 688 u8 ofdm_ht_dual_stream_basic_rates; 689 } __packed; 690 691 /* Create a common rxon cmd which will be typecast into the 3945 or 4965 692 * specific rxon cmd, depending on where it is called from. 693 */ 694 struct il_rxon_cmd { 695 u8 node_addr[6]; 696 __le16 reserved1; 697 u8 bssid_addr[6]; 698 __le16 reserved2; 699 u8 wlap_bssid_addr[6]; 700 __le16 reserved3; 701 u8 dev_type; 702 u8 air_propagation; 703 __le16 rx_chain; 704 u8 ofdm_basic_rates; 705 u8 cck_basic_rates; 706 __le16 assoc_id; 707 __le32 flags; 708 __le32 filter_flags; 709 __le16 channel; 710 u8 ofdm_ht_single_stream_basic_rates; 711 u8 ofdm_ht_dual_stream_basic_rates; 712 u8 reserved4; 713 u8 reserved5; 714 } __packed; 715 716 /* 717 * C_RXON_ASSOC = 0x11 (command, has simple generic response) 718 */ 719 struct il3945_rxon_assoc_cmd { 720 __le32 flags; 721 __le32 filter_flags; 722 u8 ofdm_basic_rates; 723 u8 cck_basic_rates; 724 __le16 reserved; 725 } __packed; 726 727 struct il4965_rxon_assoc_cmd { 728 __le32 flags; 729 __le32 filter_flags; 730 u8 ofdm_basic_rates; 731 u8 cck_basic_rates; 732 u8 ofdm_ht_single_stream_basic_rates; 733 u8 ofdm_ht_dual_stream_basic_rates; 734 __le16 rx_chain_select_flags; 735 __le16 reserved; 736 } __packed; 737 738 #define IL_CONN_MAX_LISTEN_INTERVAL 10 739 #define IL_MAX_UCODE_BEACON_INTERVAL 4 /* 4096 */ 740 #define IL39_MAX_UCODE_BEACON_INTERVAL 1 /* 1024 */ 741 742 /* 743 * C_RXON_TIMING = 0x14 (command, has simple generic response) 744 */ 745 struct il_rxon_time_cmd { 746 __le64 timestamp; 747 __le16 beacon_interval; 748 __le16 atim_win; 749 __le32 beacon_init_val; 750 __le16 listen_interval; 751 u8 dtim_period; 752 u8 delta_cp_bss_tbtts; 753 } __packed; 754 755 /* 756 * C_CHANNEL_SWITCH = 0x72 (command, has simple generic response) 757 */ 758 struct il3945_channel_switch_cmd { 759 u8 band; 760 u8 expect_beacon; 761 __le16 channel; 762 __le32 rxon_flags; 763 __le32 rxon_filter_flags; 764 __le32 switch_time; 765 struct il3945_power_per_rate power[IL_MAX_RATES]; 766 } __packed; 767 768 struct il4965_channel_switch_cmd { 769 u8 band; 770 u8 expect_beacon; 771 __le16 channel; 772 __le32 rxon_flags; 773 __le32 rxon_filter_flags; 774 __le32 switch_time; 775 struct il4965_tx_power_db tx_power; 776 } __packed; 777 778 /* 779 * N_CHANNEL_SWITCH = 0x73 (notification only, not a command) 780 */ 781 struct il_csa_notification { 782 __le16 band; 783 __le16 channel; 784 __le32 status; /* 0 - OK, 1 - fail */ 785 } __packed; 786 787 /****************************************************************************** 788 * (2) 789 * Quality-of-Service (QOS) Commands & Responses: 790 * 791 *****************************************************************************/ 792 793 /** 794 * struct il_ac_qos -- QOS timing params for C_QOS_PARAM 795 * One for each of 4 EDCA access categories in struct il_qosparam_cmd 796 * 797 * @cw_min: Contention win, start value in numbers of slots. 798 * Should be a power-of-2, minus 1. Device's default is 0x0f. 799 * @cw_max: Contention win, max value in numbers of slots. 800 * Should be a power-of-2, minus 1. Device's default is 0x3f. 801 * @aifsn: Number of slots in Arbitration Interframe Space (before 802 * performing random backoff timing prior to Tx). Device default 1. 803 * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0. 804 * 805 * Device will automatically increase contention win by (2*CW) + 1 for each 806 * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW 807 * value, to cap the CW value. 808 */ 809 struct il_ac_qos { 810 __le16 cw_min; 811 __le16 cw_max; 812 u8 aifsn; 813 u8 reserved1; 814 __le16 edca_txop; 815 } __packed; 816 817 /* QoS flags defines */ 818 #define QOS_PARAM_FLG_UPDATE_EDCA_MSK cpu_to_le32(0x01) 819 #define QOS_PARAM_FLG_TGN_MSK cpu_to_le32(0x02) 820 #define QOS_PARAM_FLG_TXOP_TYPE_MSK cpu_to_le32(0x10) 821 822 /* Number of Access Categories (AC) (EDCA), queues 0..3 */ 823 #define AC_NUM 4 824 825 /* 826 * C_QOS_PARAM = 0x13 (command, has simple generic response) 827 * 828 * This command sets up timings for each of the 4 prioritized EDCA Tx FIFOs 829 * 0: Background, 1: Best Effort, 2: Video, 3: Voice. 830 */ 831 struct il_qosparam_cmd { 832 __le32 qos_flags; 833 struct il_ac_qos ac[AC_NUM]; 834 } __packed; 835 836 /****************************************************************************** 837 * (3) 838 * Add/Modify Stations Commands & Responses: 839 * 840 *****************************************************************************/ 841 /* 842 * Multi station support 843 */ 844 845 /* Special, dedicated locations within device's station table */ 846 #define IL_AP_ID 0 847 #define IL_STA_ID 2 848 #define IL3945_BROADCAST_ID 24 849 #define IL3945_STATION_COUNT 25 850 #define IL4965_BROADCAST_ID 31 851 #define IL4965_STATION_COUNT 32 852 853 #define IL_STATION_COUNT 32 /* MAX(3945,4965) */ 854 #define IL_INVALID_STATION 255 855 856 #define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2) 857 #define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8) 858 #define STA_FLG_RTS_MIMO_PROT_MSK cpu_to_le32(1 << 17) 859 #define STA_FLG_AGG_MPDU_8US_MSK cpu_to_le32(1 << 18) 860 #define STA_FLG_MAX_AGG_SIZE_POS (19) 861 #define STA_FLG_MAX_AGG_SIZE_MSK cpu_to_le32(3 << 19) 862 #define STA_FLG_HT40_EN_MSK cpu_to_le32(1 << 21) 863 #define STA_FLG_MIMO_DIS_MSK cpu_to_le32(1 << 22) 864 #define STA_FLG_AGG_MPDU_DENSITY_POS (23) 865 #define STA_FLG_AGG_MPDU_DENSITY_MSK cpu_to_le32(7 << 23) 866 867 /* Use in mode field. 1: modify existing entry, 0: add new station entry */ 868 #define STA_CONTROL_MODIFY_MSK 0x01 869 870 /* key flags __le16*/ 871 #define STA_KEY_FLG_ENCRYPT_MSK cpu_to_le16(0x0007) 872 #define STA_KEY_FLG_NO_ENC cpu_to_le16(0x0000) 873 #define STA_KEY_FLG_WEP cpu_to_le16(0x0001) 874 #define STA_KEY_FLG_CCMP cpu_to_le16(0x0002) 875 #define STA_KEY_FLG_TKIP cpu_to_le16(0x0003) 876 877 #define STA_KEY_FLG_KEYID_POS 8 878 #define STA_KEY_FLG_INVALID cpu_to_le16(0x0800) 879 /* wep key is either from global key (0) or from station info array (1) */ 880 #define STA_KEY_FLG_MAP_KEY_MSK cpu_to_le16(0x0008) 881 882 /* wep key in STA: 5-bytes (0) or 13-bytes (1) */ 883 #define STA_KEY_FLG_KEY_SIZE_MSK cpu_to_le16(0x1000) 884 #define STA_KEY_MULTICAST_MSK cpu_to_le16(0x4000) 885 #define STA_KEY_MAX_NUM 8 886 887 /* Flags indicate whether to modify vs. don't change various station params */ 888 #define STA_MODIFY_KEY_MASK 0x01 889 #define STA_MODIFY_TID_DISABLE_TX 0x02 890 #define STA_MODIFY_TX_RATE_MSK 0x04 891 #define STA_MODIFY_ADDBA_TID_MSK 0x08 892 #define STA_MODIFY_DELBA_TID_MSK 0x10 893 #define STA_MODIFY_SLEEP_TX_COUNT_MSK 0x20 894 895 /* Receiver address (actually, Rx station's idx into station table), 896 * combined with Traffic ID (QOS priority), in format used by Tx Scheduler */ 897 #define BUILD_RAxTID(sta_id, tid) (((sta_id) << 4) + (tid)) 898 899 struct il4965_keyinfo { 900 __le16 key_flags; 901 u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */ 902 u8 reserved1; 903 __le16 tkip_rx_ttak[5]; /* 10-byte unicast TKIP TTAK */ 904 u8 key_offset; 905 u8 reserved2; 906 u8 key[16]; /* 16-byte unicast decryption key */ 907 } __packed; 908 909 /** 910 * struct sta_id_modify 911 * @addr[ETH_ALEN]: station's MAC address 912 * @sta_id: idx of station in uCode's station table 913 * @modify_mask: STA_MODIFY_*, 1: modify, 0: don't change 914 * 915 * Driver selects unused table idx when adding new station, 916 * or the idx to a pre-existing station entry when modifying that station. 917 * Some idxes have special purposes (IL_AP_ID, idx 0, is for AP). 918 * 919 * modify_mask flags select which parameters to modify vs. leave alone. 920 */ 921 struct sta_id_modify { 922 u8 addr[ETH_ALEN]; 923 __le16 reserved1; 924 u8 sta_id; 925 u8 modify_mask; 926 __le16 reserved2; 927 } __packed; 928 929 /* 930 * C_ADD_STA = 0x18 (command) 931 * 932 * The device contains an internal table of per-station information, 933 * with info on security keys, aggregation parameters, and Tx rates for 934 * initial Tx attempt and any retries (4965 devices uses 935 * C_TX_LINK_QUALITY_CMD, 936 * 3945 uses C_RATE_SCALE to set up rate tables). 937 * 938 * C_ADD_STA sets up the table entry for one station, either creating 939 * a new entry, or modifying a pre-existing one. 940 * 941 * NOTE: RXON command (without "associated" bit set) wipes the station table 942 * clean. Moving into RF_KILL state does this also. Driver must set up 943 * new station table before transmitting anything on the RXON channel 944 * (except active scans or active measurements; those commands carry 945 * their own txpower/rate setup data). 946 * 947 * When getting started on a new channel, driver must set up the 948 * IL_BROADCAST_ID entry (last entry in the table). For a client 949 * station in a BSS, once an AP is selected, driver sets up the AP STA 950 * in the IL_AP_ID entry (1st entry in the table). BROADCAST and AP 951 * are all that are needed for a BSS client station. If the device is 952 * used as AP, or in an IBSS network, driver must set up station table 953 * entries for all STAs in network, starting with idx IL_STA_ID. 954 */ 955 956 struct il3945_addsta_cmd { 957 u8 mode; /* 1: modify existing, 0: add new station */ 958 u8 reserved[3]; 959 struct sta_id_modify sta; 960 struct il4965_keyinfo key; 961 __le32 station_flags; /* STA_FLG_* */ 962 __le32 station_flags_msk; /* STA_FLG_* */ 963 964 /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID) 965 * corresponding to bit (e.g. bit 5 controls TID 5). 966 * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ 967 __le16 tid_disable_tx; 968 969 __le16 rate_n_flags; 970 971 /* TID for which to add block-ack support. 972 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ 973 u8 add_immediate_ba_tid; 974 975 /* TID for which to remove block-ack support. 976 * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */ 977 u8 remove_immediate_ba_tid; 978 979 /* Starting Sequence Number for added block-ack support. 980 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ 981 __le16 add_immediate_ba_ssn; 982 } __packed; 983 984 struct il4965_addsta_cmd { 985 u8 mode; /* 1: modify existing, 0: add new station */ 986 u8 reserved[3]; 987 struct sta_id_modify sta; 988 struct il4965_keyinfo key; 989 __le32 station_flags; /* STA_FLG_* */ 990 __le32 station_flags_msk; /* STA_FLG_* */ 991 992 /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID) 993 * corresponding to bit (e.g. bit 5 controls TID 5). 994 * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ 995 __le16 tid_disable_tx; 996 997 __le16 reserved1; 998 999 /* TID for which to add block-ack support. 1000 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ 1001 u8 add_immediate_ba_tid; 1002 1003 /* TID for which to remove block-ack support. 1004 * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */ 1005 u8 remove_immediate_ba_tid; 1006 1007 /* Starting Sequence Number for added block-ack support. 1008 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ 1009 __le16 add_immediate_ba_ssn; 1010 1011 /* 1012 * Number of packets OK to transmit to station even though 1013 * it is asleep -- used to synchronise PS-poll and u-APSD 1014 * responses while ucode keeps track of STA sleep state. 1015 */ 1016 __le16 sleep_tx_count; 1017 1018 __le16 reserved2; 1019 } __packed; 1020 1021 /* Wrapper struct for 3945 and 4965 addsta_cmd structures */ 1022 struct il_addsta_cmd { 1023 u8 mode; /* 1: modify existing, 0: add new station */ 1024 u8 reserved[3]; 1025 struct sta_id_modify sta; 1026 struct il4965_keyinfo key; 1027 __le32 station_flags; /* STA_FLG_* */ 1028 __le32 station_flags_msk; /* STA_FLG_* */ 1029 1030 /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID) 1031 * corresponding to bit (e.g. bit 5 controls TID 5). 1032 * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ 1033 __le16 tid_disable_tx; 1034 1035 __le16 rate_n_flags; /* 3945 only */ 1036 1037 /* TID for which to add block-ack support. 1038 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ 1039 u8 add_immediate_ba_tid; 1040 1041 /* TID for which to remove block-ack support. 1042 * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */ 1043 u8 remove_immediate_ba_tid; 1044 1045 /* Starting Sequence Number for added block-ack support. 1046 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ 1047 __le16 add_immediate_ba_ssn; 1048 1049 /* 1050 * Number of packets OK to transmit to station even though 1051 * it is asleep -- used to synchronise PS-poll and u-APSD 1052 * responses while ucode keeps track of STA sleep state. 1053 */ 1054 __le16 sleep_tx_count; 1055 1056 __le16 reserved2; 1057 } __packed; 1058 1059 #define ADD_STA_SUCCESS_MSK 0x1 1060 #define ADD_STA_NO_ROOM_IN_TBL 0x2 1061 #define ADD_STA_NO_BLOCK_ACK_RESOURCE 0x4 1062 #define ADD_STA_MODIFY_NON_EXIST_STA 0x8 1063 /* 1064 * C_ADD_STA = 0x18 (response) 1065 */ 1066 struct il_add_sta_resp { 1067 u8 status; /* ADD_STA_* */ 1068 } __packed; 1069 1070 #define REM_STA_SUCCESS_MSK 0x1 1071 /* 1072 * C_REM_STA = 0x19 (response) 1073 */ 1074 struct il_rem_sta_resp { 1075 u8 status; 1076 } __packed; 1077 1078 /* 1079 * C_REM_STA = 0x19 (command) 1080 */ 1081 struct il_rem_sta_cmd { 1082 u8 num_sta; /* number of removed stations */ 1083 u8 reserved[3]; 1084 u8 addr[ETH_ALEN]; /* MAC addr of the first station */ 1085 u8 reserved2[2]; 1086 } __packed; 1087 1088 #define IL_TX_FIFO_BK_MSK cpu_to_le32(BIT(0)) 1089 #define IL_TX_FIFO_BE_MSK cpu_to_le32(BIT(1)) 1090 #define IL_TX_FIFO_VI_MSK cpu_to_le32(BIT(2)) 1091 #define IL_TX_FIFO_VO_MSK cpu_to_le32(BIT(3)) 1092 #define IL_AGG_TX_QUEUE_MSK cpu_to_le32(0xffc00) 1093 1094 #define IL_DROP_SINGLE 0 1095 #define IL_DROP_SELECTED 1 1096 #define IL_DROP_ALL 2 1097 1098 /* 1099 * REPLY_WEP_KEY = 0x20 1100 */ 1101 struct il_wep_key { 1102 u8 key_idx; 1103 u8 key_offset; 1104 u8 reserved1[2]; 1105 u8 key_size; 1106 u8 reserved2[3]; 1107 u8 key[16]; 1108 } __packed; 1109 1110 struct il_wep_cmd { 1111 u8 num_keys; 1112 u8 global_key_type; 1113 u8 flags; 1114 u8 reserved; 1115 struct il_wep_key key[]; 1116 } __packed; 1117 1118 #define WEP_KEY_WEP_TYPE 1 1119 #define WEP_KEYS_MAX 4 1120 #define WEP_INVALID_OFFSET 0xff 1121 #define WEP_KEY_LEN_64 5 1122 #define WEP_KEY_LEN_128 13 1123 1124 /****************************************************************************** 1125 * (4) 1126 * Rx Responses: 1127 * 1128 *****************************************************************************/ 1129 1130 #define RX_RES_STATUS_NO_CRC32_ERROR cpu_to_le32(1 << 0) 1131 #define RX_RES_STATUS_NO_RXE_OVERFLOW cpu_to_le32(1 << 1) 1132 1133 #define RX_RES_PHY_FLAGS_BAND_24_MSK cpu_to_le16(1 << 0) 1134 #define RX_RES_PHY_FLAGS_MOD_CCK_MSK cpu_to_le16(1 << 1) 1135 #define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2) 1136 #define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3) 1137 #define RX_RES_PHY_FLAGS_ANTENNA_MSK 0x70 1138 #define RX_RES_PHY_FLAGS_ANTENNA_POS 4 1139 #define RX_RES_PHY_FLAGS_AGG_MSK cpu_to_le16(1 << 7) 1140 1141 #define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8) 1142 #define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8) 1143 #define RX_RES_STATUS_SEC_TYPE_WEP (0x1 << 8) 1144 #define RX_RES_STATUS_SEC_TYPE_CCMP (0x2 << 8) 1145 #define RX_RES_STATUS_SEC_TYPE_TKIP (0x3 << 8) 1146 #define RX_RES_STATUS_SEC_TYPE_ERR (0x7 << 8) 1147 1148 #define RX_RES_STATUS_STATION_FOUND (1<<6) 1149 #define RX_RES_STATUS_NO_STATION_INFO_MISMATCH (1<<7) 1150 1151 #define RX_RES_STATUS_DECRYPT_TYPE_MSK (0x3 << 11) 1152 #define RX_RES_STATUS_NOT_DECRYPT (0x0 << 11) 1153 #define RX_RES_STATUS_DECRYPT_OK (0x3 << 11) 1154 #define RX_RES_STATUS_BAD_ICV_MIC (0x1 << 11) 1155 #define RX_RES_STATUS_BAD_KEY_TTAK (0x2 << 11) 1156 1157 #define RX_MPDU_RES_STATUS_ICV_OK (0x20) 1158 #define RX_MPDU_RES_STATUS_MIC_OK (0x40) 1159 #define RX_MPDU_RES_STATUS_TTAK_OK (1 << 7) 1160 #define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800) 1161 1162 struct il3945_rx_frame_stats { 1163 u8 phy_count; 1164 u8 id; 1165 u8 rssi; 1166 u8 agc; 1167 __le16 sig_avg; 1168 __le16 noise_diff; 1169 u8 payload[]; 1170 } __packed; 1171 1172 struct il3945_rx_frame_hdr { 1173 __le16 channel; 1174 __le16 phy_flags; 1175 u8 reserved1; 1176 u8 rate; 1177 __le16 len; 1178 u8 payload[]; 1179 } __packed; 1180 1181 struct il3945_rx_frame_end { 1182 __le32 status; 1183 __le64 timestamp; 1184 __le32 beacon_timestamp; 1185 } __packed; 1186 1187 /* 1188 * N_3945_RX = 0x1b (response only, not a command) 1189 * 1190 * NOTE: DO NOT dereference from casts to this structure 1191 * It is provided only for calculating minimum data set size. 1192 * The actual offsets of the hdr and end are dynamic based on 1193 * stats.phy_count 1194 */ 1195 struct il3945_rx_frame { 1196 struct il3945_rx_frame_stats stats; 1197 struct il3945_rx_frame_hdr hdr; 1198 struct il3945_rx_frame_end end; 1199 } __packed; 1200 1201 #define IL39_RX_FRAME_SIZE (4 + sizeof(struct il3945_rx_frame)) 1202 1203 /* Fixed (non-configurable) rx data from phy */ 1204 1205 #define IL49_RX_RES_PHY_CNT 14 1206 #define IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET (4) 1207 #define IL49_RX_PHY_FLAGS_ANTENNAE_MASK (0x70) 1208 #define IL49_AGC_DB_MASK (0x3f80) /* MASK(7,13) */ 1209 #define IL49_AGC_DB_POS (7) 1210 struct il4965_rx_non_cfg_phy { 1211 __le16 ant_selection; /* ant A bit 4, ant B bit 5, ant C bit 6 */ 1212 __le16 agc_info; /* agc code 0:6, agc dB 7:13, reserved 14:15 */ 1213 u8 rssi_info[6]; /* we use even entries, 0/2/4 for A/B/C rssi */ 1214 u8 pad[]; 1215 } __packed; 1216 1217 /* 1218 * N_RX = 0xc3 (response only, not a command) 1219 * Used only for legacy (non 11n) frames. 1220 */ 1221 struct il_rx_phy_res { 1222 u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */ 1223 u8 cfg_phy_cnt; /* configurable DSP phy data byte count */ 1224 u8 stat_id; /* configurable DSP phy data set ID */ 1225 u8 reserved1; 1226 __le64 timestamp; /* TSF at on air rise */ 1227 __le32 beacon_time_stamp; /* beacon at on-air rise */ 1228 __le16 phy_flags; /* general phy flags: band, modulation, ... */ 1229 __le16 channel; /* channel number */ 1230 u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */ 1231 __le32 rate_n_flags; /* RATE_MCS_* */ 1232 __le16 byte_count; /* frame's byte-count */ 1233 __le16 frame_time; /* frame's time on the air */ 1234 } __packed; 1235 1236 struct il_rx_mpdu_res_start { 1237 __le16 byte_count; 1238 __le16 reserved; 1239 } __packed; 1240 1241 /****************************************************************************** 1242 * (5) 1243 * Tx Commands & Responses: 1244 * 1245 * Driver must place each C_TX command into one of the prioritized Tx 1246 * queues in host DRAM, shared between driver and device (see comments for 1247 * SCD registers and Tx/Rx Queues). When the device's Tx scheduler and uCode 1248 * are preparing to transmit, the device pulls the Tx command over the PCI 1249 * bus via one of the device's Tx DMA channels, to fill an internal FIFO 1250 * from which data will be transmitted. 1251 * 1252 * uCode handles all timing and protocol related to control frames 1253 * (RTS/CTS/ACK), based on flags in the Tx command. uCode and Tx scheduler 1254 * handle reception of block-acks; uCode updates the host driver via 1255 * N_COMPRESSED_BA. 1256 * 1257 * uCode handles retrying Tx when an ACK is expected but not received. 1258 * This includes trying lower data rates than the one requested in the Tx 1259 * command, as set up by the C_RATE_SCALE (for 3945) or 1260 * C_TX_LINK_QUALITY_CMD (4965). 1261 * 1262 * Driver sets up transmit power for various rates via C_TX_PWR_TBL. 1263 * This command must be executed after every RXON command, before Tx can occur. 1264 *****************************************************************************/ 1265 1266 /* C_TX Tx flags field */ 1267 1268 /* 1269 * 1: Use Request-To-Send protocol before this frame. 1270 * Mutually exclusive vs. TX_CMD_FLG_CTS_MSK. 1271 */ 1272 #define TX_CMD_FLG_RTS_MSK cpu_to_le32(1 << 1) 1273 1274 /* 1275 * 1: Transmit Clear-To-Send to self before this frame. 1276 * Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames. 1277 * Mutually exclusive vs. TX_CMD_FLG_RTS_MSK. 1278 */ 1279 #define TX_CMD_FLG_CTS_MSK cpu_to_le32(1 << 2) 1280 1281 /* 1: Expect ACK from receiving station 1282 * 0: Don't expect ACK (MAC header's duration field s/b 0) 1283 * Set this for unicast frames, but not broadcast/multicast. */ 1284 #define TX_CMD_FLG_ACK_MSK cpu_to_le32(1 << 3) 1285 1286 /* For 4965 devices: 1287 * 1: Use rate scale table (see C_TX_LINK_QUALITY_CMD). 1288 * Tx command's initial_rate_idx indicates first rate to try; 1289 * uCode walks through table for additional Tx attempts. 1290 * 0: Use Tx rate/MCS from Tx command's rate_n_flags field. 1291 * This rate will be used for all Tx attempts; it will not be scaled. */ 1292 #define TX_CMD_FLG_STA_RATE_MSK cpu_to_le32(1 << 4) 1293 1294 /* 1: Expect immediate block-ack. 1295 * Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */ 1296 #define TX_CMD_FLG_IMM_BA_RSP_MASK cpu_to_le32(1 << 6) 1297 1298 /* 1299 * 1: Frame requires full Tx-Op protection. 1300 * Set this if either RTS or CTS Tx Flag gets set. 1301 */ 1302 #define TX_CMD_FLG_FULL_TXOP_PROT_MSK cpu_to_le32(1 << 7) 1303 1304 /* Tx antenna selection field; used only for 3945, reserved (0) for 4965 devices. 1305 * Set field to "0" to allow 3945 uCode to select antenna (normal usage). */ 1306 #define TX_CMD_FLG_ANT_SEL_MSK cpu_to_le32(0xf00) 1307 #define TX_CMD_FLG_ANT_A_MSK cpu_to_le32(1 << 8) 1308 #define TX_CMD_FLG_ANT_B_MSK cpu_to_le32(1 << 9) 1309 1310 /* 1: uCode overrides sequence control field in MAC header. 1311 * 0: Driver provides sequence control field in MAC header. 1312 * Set this for management frames, non-QOS data frames, non-unicast frames, 1313 * and also in Tx command embedded in C_SCAN for active scans. */ 1314 #define TX_CMD_FLG_SEQ_CTL_MSK cpu_to_le32(1 << 13) 1315 1316 /* 1: This frame is non-last MPDU; more fragments are coming. 1317 * 0: Last fragment, or not using fragmentation. */ 1318 #define TX_CMD_FLG_MORE_FRAG_MSK cpu_to_le32(1 << 14) 1319 1320 /* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame. 1321 * 0: No TSF required in outgoing frame. 1322 * Set this for transmitting beacons and probe responses. */ 1323 #define TX_CMD_FLG_TSF_MSK cpu_to_le32(1 << 16) 1324 1325 /* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword 1326 * alignment of frame's payload data field. 1327 * 0: No pad 1328 * Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4 1329 * field (but not both). Driver must align frame data (i.e. data following 1330 * MAC header) to DWORD boundary. */ 1331 #define TX_CMD_FLG_MH_PAD_MSK cpu_to_le32(1 << 20) 1332 1333 /* accelerate aggregation support 1334 * 0 - no CCMP encryption; 1 - CCMP encryption */ 1335 #define TX_CMD_FLG_AGG_CCMP_MSK cpu_to_le32(1 << 22) 1336 1337 /* HCCA-AP - disable duration overwriting. */ 1338 #define TX_CMD_FLG_DUR_MSK cpu_to_le32(1 << 25) 1339 1340 /* 1341 * TX command security control 1342 */ 1343 #define TX_CMD_SEC_WEP 0x01 1344 #define TX_CMD_SEC_CCM 0x02 1345 #define TX_CMD_SEC_TKIP 0x03 1346 #define TX_CMD_SEC_MSK 0x03 1347 #define TX_CMD_SEC_SHIFT 6 1348 #define TX_CMD_SEC_KEY128 0x08 1349 1350 /* 1351 * C_TX = 0x1c (command) 1352 */ 1353 1354 struct il3945_tx_cmd { 1355 /* 1356 * MPDU byte count: 1357 * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size, 1358 * + 8 byte IV for CCM or TKIP (not used for WEP) 1359 * + Data payload 1360 * + 8-byte MIC (not used for CCM/WEP) 1361 * NOTE: Does not include Tx command bytes, post-MAC pad bytes, 1362 * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i 1363 * Range: 14-2342 bytes. 1364 */ 1365 __le16 len; 1366 1367 /* 1368 * MPDU or MSDU byte count for next frame. 1369 * Used for fragmentation and bursting, but not 11n aggregation. 1370 * Same as "len", but for next frame. Set to 0 if not applicable. 1371 */ 1372 __le16 next_frame_len; 1373 1374 __le32 tx_flags; /* TX_CMD_FLG_* */ 1375 1376 u8 rate; 1377 1378 /* Index of recipient station in uCode's station table */ 1379 u8 sta_id; 1380 u8 tid_tspec; 1381 u8 sec_ctl; 1382 u8 key[16]; 1383 union { 1384 u8 byte[8]; 1385 __le16 word[4]; 1386 __le32 dw[2]; 1387 } tkip_mic; 1388 __le32 next_frame_info; 1389 union { 1390 __le32 life_time; 1391 __le32 attempt; 1392 } stop_time; 1393 u8 supp_rates[2]; 1394 u8 rts_retry_limit; /*byte 50 */ 1395 u8 data_retry_limit; /*byte 51 */ 1396 union { 1397 __le16 pm_frame_timeout; 1398 __le16 attempt_duration; 1399 } timeout; 1400 1401 /* 1402 * Duration of EDCA burst Tx Opportunity, in 32-usec units. 1403 * Set this if txop time is not specified by HCCA protocol (e.g. by AP). 1404 */ 1405 __le16 driver_txop; 1406 1407 /* 1408 * MAC header goes here, followed by 2 bytes padding if MAC header 1409 * length is 26 or 30 bytes, followed by payload data 1410 */ 1411 union { 1412 DECLARE_FLEX_ARRAY(u8, payload); 1413 DECLARE_FLEX_ARRAY(struct ieee80211_hdr, hdr); 1414 }; 1415 } __packed; 1416 1417 /* 1418 * C_TX = 0x1c (response) 1419 */ 1420 struct il3945_tx_resp { 1421 u8 failure_rts; 1422 u8 failure_frame; 1423 u8 bt_kill_count; 1424 u8 rate; 1425 __le32 wireless_media_time; 1426 __le32 status; /* TX status */ 1427 } __packed; 1428 1429 /* 1430 * 4965 uCode updates these Tx attempt count values in host DRAM. 1431 * Used for managing Tx retries when expecting block-acks. 1432 * Driver should set these fields to 0. 1433 */ 1434 struct il_dram_scratch { 1435 u8 try_cnt; /* Tx attempts */ 1436 u8 bt_kill_cnt; /* Tx attempts blocked by Bluetooth device */ 1437 __le16 reserved; 1438 } __packed; 1439 1440 struct il_tx_cmd { 1441 /* 1442 * MPDU byte count: 1443 * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size, 1444 * + 8 byte IV for CCM or TKIP (not used for WEP) 1445 * + Data payload 1446 * + 8-byte MIC (not used for CCM/WEP) 1447 * NOTE: Does not include Tx command bytes, post-MAC pad bytes, 1448 * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i 1449 * Range: 14-2342 bytes. 1450 */ 1451 __le16 len; 1452 1453 /* 1454 * MPDU or MSDU byte count for next frame. 1455 * Used for fragmentation and bursting, but not 11n aggregation. 1456 * Same as "len", but for next frame. Set to 0 if not applicable. 1457 */ 1458 __le16 next_frame_len; 1459 1460 __le32 tx_flags; /* TX_CMD_FLG_* */ 1461 1462 /* uCode may modify this field of the Tx command (in host DRAM!). 1463 * Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */ 1464 struct il_dram_scratch scratch; 1465 1466 /* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */ 1467 __le32 rate_n_flags; /* RATE_MCS_* */ 1468 1469 /* Index of destination station in uCode's station table */ 1470 u8 sta_id; 1471 1472 /* Type of security encryption: CCM or TKIP */ 1473 u8 sec_ctl; /* TX_CMD_SEC_* */ 1474 1475 /* 1476 * Index into rate table (see C_TX_LINK_QUALITY_CMD) for initial 1477 * Tx attempt, if TX_CMD_FLG_STA_RATE_MSK is set. Normally "0" for 1478 * data frames, this field may be used to selectively reduce initial 1479 * rate (via non-0 value) for special frames (e.g. management), while 1480 * still supporting rate scaling for all frames. 1481 */ 1482 u8 initial_rate_idx; 1483 u8 reserved; 1484 u8 key[16]; 1485 __le16 next_frame_flags; 1486 __le16 reserved2; 1487 union { 1488 __le32 life_time; 1489 __le32 attempt; 1490 } stop_time; 1491 1492 /* Host DRAM physical address pointer to "scratch" in this command. 1493 * Must be dword aligned. "0" in dram_lsb_ptr disables usage. */ 1494 __le32 dram_lsb_ptr; 1495 u8 dram_msb_ptr; 1496 1497 u8 rts_retry_limit; /*byte 50 */ 1498 u8 data_retry_limit; /*byte 51 */ 1499 u8 tid_tspec; 1500 union { 1501 __le16 pm_frame_timeout; 1502 __le16 attempt_duration; 1503 } timeout; 1504 1505 /* 1506 * Duration of EDCA burst Tx Opportunity, in 32-usec units. 1507 * Set this if txop time is not specified by HCCA protocol (e.g. by AP). 1508 */ 1509 __le16 driver_txop; 1510 1511 /* 1512 * MAC header goes here, followed by 2 bytes padding if MAC header 1513 * length is 26 or 30 bytes, followed by payload data 1514 */ 1515 u8 payload[0]; 1516 struct ieee80211_hdr hdr[]; 1517 } __packed; 1518 1519 /* TX command response is sent after *3945* transmission attempts. 1520 * 1521 * NOTES: 1522 * 1523 * TX_STATUS_FAIL_NEXT_FRAG 1524 * 1525 * If the fragment flag in the MAC header for the frame being transmitted 1526 * is set and there is insufficient time to transmit the next frame, the 1527 * TX status will be returned with 'TX_STATUS_FAIL_NEXT_FRAG'. 1528 * 1529 * TX_STATUS_FIFO_UNDERRUN 1530 * 1531 * Indicates the host did not provide bytes to the FIFO fast enough while 1532 * a TX was in progress. 1533 * 1534 * TX_STATUS_FAIL_MGMNT_ABORT 1535 * 1536 * This status is only possible if the ABORT ON MGMT RX parameter was 1537 * set to true with the TX command. 1538 * 1539 * If the MSB of the status parameter is set then an abort sequence is 1540 * required. This sequence consists of the host activating the TX Abort 1541 * control line, and then waiting for the TX Abort command response. This 1542 * indicates that a the device is no longer in a transmit state, and that the 1543 * command FIFO has been cleared. The host must then deactivate the TX Abort 1544 * control line. Receiving is still allowed in this case. 1545 */ 1546 enum { 1547 TX_3945_STATUS_SUCCESS = 0x01, 1548 TX_3945_STATUS_DIRECT_DONE = 0x02, 1549 TX_3945_STATUS_FAIL_SHORT_LIMIT = 0x82, 1550 TX_3945_STATUS_FAIL_LONG_LIMIT = 0x83, 1551 TX_3945_STATUS_FAIL_FIFO_UNDERRUN = 0x84, 1552 TX_3945_STATUS_FAIL_MGMNT_ABORT = 0x85, 1553 TX_3945_STATUS_FAIL_NEXT_FRAG = 0x86, 1554 TX_3945_STATUS_FAIL_LIFE_EXPIRE = 0x87, 1555 TX_3945_STATUS_FAIL_DEST_PS = 0x88, 1556 TX_3945_STATUS_FAIL_ABORTED = 0x89, 1557 TX_3945_STATUS_FAIL_BT_RETRY = 0x8a, 1558 TX_3945_STATUS_FAIL_STA_INVALID = 0x8b, 1559 TX_3945_STATUS_FAIL_FRAG_DROPPED = 0x8c, 1560 TX_3945_STATUS_FAIL_TID_DISABLE = 0x8d, 1561 TX_3945_STATUS_FAIL_FRAME_FLUSHED = 0x8e, 1562 TX_3945_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f, 1563 TX_3945_STATUS_FAIL_TX_LOCKED = 0x90, 1564 TX_3945_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91, 1565 }; 1566 1567 /* 1568 * TX command response is sent after *4965* transmission attempts. 1569 * 1570 * both postpone and abort status are expected behavior from uCode. there is 1571 * no special operation required from driver; except for RFKILL_FLUSH, 1572 * which required tx flush host command to flush all the tx frames in queues 1573 */ 1574 enum { 1575 TX_STATUS_SUCCESS = 0x01, 1576 TX_STATUS_DIRECT_DONE = 0x02, 1577 /* postpone TX */ 1578 TX_STATUS_POSTPONE_DELAY = 0x40, 1579 TX_STATUS_POSTPONE_FEW_BYTES = 0x41, 1580 TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43, 1581 TX_STATUS_POSTPONE_CALC_TTAK = 0x44, 1582 /* abort TX */ 1583 TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81, 1584 TX_STATUS_FAIL_SHORT_LIMIT = 0x82, 1585 TX_STATUS_FAIL_LONG_LIMIT = 0x83, 1586 TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84, 1587 TX_STATUS_FAIL_DRAIN_FLOW = 0x85, 1588 TX_STATUS_FAIL_RFKILL_FLUSH = 0x86, 1589 TX_STATUS_FAIL_LIFE_EXPIRE = 0x87, 1590 TX_STATUS_FAIL_DEST_PS = 0x88, 1591 TX_STATUS_FAIL_HOST_ABORTED = 0x89, 1592 TX_STATUS_FAIL_BT_RETRY = 0x8a, 1593 TX_STATUS_FAIL_STA_INVALID = 0x8b, 1594 TX_STATUS_FAIL_FRAG_DROPPED = 0x8c, 1595 TX_STATUS_FAIL_TID_DISABLE = 0x8d, 1596 TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e, 1597 TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f, 1598 TX_STATUS_FAIL_PASSIVE_NO_RX = 0x90, 1599 TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91, 1600 }; 1601 1602 #define TX_PACKET_MODE_REGULAR 0x0000 1603 #define TX_PACKET_MODE_BURST_SEQ 0x0100 1604 #define TX_PACKET_MODE_BURST_FIRST 0x0200 1605 1606 enum { 1607 TX_POWER_PA_NOT_ACTIVE = 0x0, 1608 }; 1609 1610 enum { 1611 TX_STATUS_MSK = 0x000000ff, /* bits 0:7 */ 1612 TX_STATUS_DELAY_MSK = 0x00000040, 1613 TX_STATUS_ABORT_MSK = 0x00000080, 1614 TX_PACKET_MODE_MSK = 0x0000ff00, /* bits 8:15 */ 1615 TX_FIFO_NUMBER_MSK = 0x00070000, /* bits 16:18 */ 1616 TX_RESERVED = 0x00780000, /* bits 19:22 */ 1617 TX_POWER_PA_DETECT_MSK = 0x7f800000, /* bits 23:30 */ 1618 TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */ 1619 }; 1620 1621 /* ******************************* 1622 * TX aggregation status 1623 ******************************* */ 1624 1625 enum { 1626 AGG_TX_STATE_TRANSMITTED = 0x00, 1627 AGG_TX_STATE_UNDERRUN_MSK = 0x01, 1628 AGG_TX_STATE_FEW_BYTES_MSK = 0x04, 1629 AGG_TX_STATE_ABORT_MSK = 0x08, 1630 AGG_TX_STATE_LAST_SENT_TTL_MSK = 0x10, 1631 AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK = 0x20, 1632 AGG_TX_STATE_SCD_QUERY_MSK = 0x80, 1633 AGG_TX_STATE_TEST_BAD_CRC32_MSK = 0x100, 1634 AGG_TX_STATE_RESPONSE_MSK = 0x1ff, 1635 AGG_TX_STATE_DUMP_TX_MSK = 0x200, 1636 AGG_TX_STATE_DELAY_TX_MSK = 0x400 1637 }; 1638 1639 #define AGG_TX_STATUS_MSK 0x00000fff /* bits 0:11 */ 1640 #define AGG_TX_TRY_MSK 0x0000f000 /* bits 12:15 */ 1641 1642 #define AGG_TX_STATE_LAST_SENT_MSK (AGG_TX_STATE_LAST_SENT_TTL_MSK | \ 1643 AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK) 1644 1645 /* # tx attempts for first frame in aggregation */ 1646 #define AGG_TX_STATE_TRY_CNT_POS 12 1647 #define AGG_TX_STATE_TRY_CNT_MSK 0xf000 1648 1649 /* Command ID and sequence number of Tx command for this frame */ 1650 #define AGG_TX_STATE_SEQ_NUM_POS 16 1651 #define AGG_TX_STATE_SEQ_NUM_MSK 0xffff0000 1652 1653 /* 1654 * C_TX = 0x1c (response) 1655 * 1656 * This response may be in one of two slightly different formats, indicated 1657 * by the frame_count field: 1658 * 1659 * 1) No aggregation (frame_count == 1). This reports Tx results for 1660 * a single frame. Multiple attempts, at various bit rates, may have 1661 * been made for this frame. 1662 * 1663 * 2) Aggregation (frame_count > 1). This reports Tx results for 1664 * 2 or more frames that used block-acknowledge. All frames were 1665 * transmitted at same rate. Rate scaling may have been used if first 1666 * frame in this new agg block failed in previous agg block(s). 1667 * 1668 * Note that, for aggregation, ACK (block-ack) status is not delivered here; 1669 * block-ack has not been received by the time the 4965 device records 1670 * this status. 1671 * This status relates to reasons the tx might have been blocked or aborted 1672 * within the sending station (this 4965 device), rather than whether it was 1673 * received successfully by the destination station. 1674 */ 1675 struct agg_tx_status { 1676 __le16 status; 1677 __le16 sequence; 1678 } __packed; 1679 1680 struct il4965_tx_resp { 1681 u8 frame_count; /* 1 no aggregation, >1 aggregation */ 1682 u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */ 1683 u8 failure_rts; /* # failures due to unsuccessful RTS */ 1684 u8 failure_frame; /* # failures due to no ACK (unused for agg) */ 1685 1686 /* For non-agg: Rate at which frame was successful. 1687 * For agg: Rate at which all frames were transmitted. */ 1688 __le32 rate_n_flags; /* RATE_MCS_* */ 1689 1690 /* For non-agg: RTS + CTS + frame tx attempts time + ACK. 1691 * For agg: RTS + CTS + aggregation tx time + block-ack time. */ 1692 __le16 wireless_media_time; /* uSecs */ 1693 1694 __le16 reserved; 1695 __le32 pa_power1; /* RF power amplifier measurement (not used) */ 1696 __le32 pa_power2; 1697 1698 /* 1699 * For non-agg: frame status TX_STATUS_* 1700 * For agg: status of 1st frame, AGG_TX_STATE_*; other frame status 1701 * fields follow this one, up to frame_count. 1702 * Bit fields: 1703 * 11- 0: AGG_TX_STATE_* status code 1704 * 15-12: Retry count for 1st frame in aggregation (retries 1705 * occur if tx failed for this frame when it was a 1706 * member of a previous aggregation block). If rate 1707 * scaling is used, retry count indicates the rate 1708 * table entry used for all frames in the new agg. 1709 * 31-16: Sequence # for this frame's Tx cmd (not SSN!) 1710 */ 1711 union { 1712 __le32 status; 1713 struct agg_tx_status agg_status[0]; /* for each agg frame */ 1714 } u; 1715 } __packed; 1716 1717 /* 1718 * N_COMPRESSED_BA = 0xc5 (response only, not a command) 1719 * 1720 * Reports Block-Acknowledge from recipient station 1721 */ 1722 struct il_compressed_ba_resp { 1723 __le32 sta_addr_lo32; 1724 __le16 sta_addr_hi16; 1725 __le16 reserved; 1726 1727 /* Index of recipient (BA-sending) station in uCode's station table */ 1728 u8 sta_id; 1729 u8 tid; 1730 __le16 seq_ctl; 1731 __le64 bitmap; 1732 __le16 scd_flow; 1733 __le16 scd_ssn; 1734 } __packed; 1735 1736 /* 1737 * C_TX_PWR_TBL = 0x97 (command, has simple generic response) 1738 * 1739 * See details under "TXPOWER" in 4965.h. 1740 */ 1741 1742 struct il3945_txpowertable_cmd { 1743 u8 band; /* 0: 5 GHz, 1: 2.4 GHz */ 1744 u8 reserved; 1745 __le16 channel; 1746 struct il3945_power_per_rate power[IL_MAX_RATES]; 1747 } __packed; 1748 1749 struct il4965_txpowertable_cmd { 1750 u8 band; /* 0: 5 GHz, 1: 2.4 GHz */ 1751 u8 reserved; 1752 __le16 channel; 1753 struct il4965_tx_power_db tx_power; 1754 } __packed; 1755 1756 /** 1757 * struct il3945_rate_scaling_cmd - Rate Scaling Command & Response 1758 * 1759 * C_RATE_SCALE = 0x47 (command, has simple generic response) 1760 * 1761 * NOTE: The table of rates passed to the uCode via the 1762 * RATE_SCALE command sets up the corresponding order of 1763 * rates used for all related commands, including rate 1764 * masks, etc. 1765 * 1766 * For example, if you set 9MB (PLCP 0x0f) as the first 1767 * rate in the rate table, the bit mask for that rate 1768 * when passed through ofdm_basic_rates on the C_RXON 1769 * command would be bit 0 (1 << 0) 1770 */ 1771 struct il3945_rate_scaling_info { 1772 __le16 rate_n_flags; 1773 u8 try_cnt; 1774 u8 next_rate_idx; 1775 } __packed; 1776 1777 struct il3945_rate_scaling_cmd { 1778 u8 table_id; 1779 u8 reserved[3]; 1780 struct il3945_rate_scaling_info table[IL_MAX_RATES]; 1781 } __packed; 1782 1783 /*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */ 1784 #define LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK (1 << 0) 1785 1786 /* # of EDCA prioritized tx fifos */ 1787 #define LINK_QUAL_AC_NUM AC_NUM 1788 1789 /* # entries in rate scale table to support Tx retries */ 1790 #define LINK_QUAL_MAX_RETRY_NUM 16 1791 1792 /* Tx antenna selection values */ 1793 #define LINK_QUAL_ANT_A_MSK (1 << 0) 1794 #define LINK_QUAL_ANT_B_MSK (1 << 1) 1795 #define LINK_QUAL_ANT_MSK (LINK_QUAL_ANT_A_MSK|LINK_QUAL_ANT_B_MSK) 1796 1797 /** 1798 * struct il_link_qual_general_params 1799 * 1800 * Used in C_TX_LINK_QUALITY_CMD 1801 */ 1802 struct il_link_qual_general_params { 1803 u8 flags; 1804 1805 /* No entries at or above this (driver chosen) idx contain MIMO */ 1806 u8 mimo_delimiter; 1807 1808 /* Best single antenna to use for single stream (legacy, SISO). */ 1809 u8 single_stream_ant_msk; /* LINK_QUAL_ANT_* */ 1810 1811 /* Best antennas to use for MIMO (unused for 4965, assumes both). */ 1812 u8 dual_stream_ant_msk; /* LINK_QUAL_ANT_* */ 1813 1814 /* 1815 * If driver needs to use different initial rates for different 1816 * EDCA QOS access categories (as implemented by tx fifos 0-3), 1817 * this table will set that up, by indicating the idxes in the 1818 * rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table at which to start. 1819 * Otherwise, driver should set all entries to 0. 1820 * 1821 * Entry usage: 1822 * 0 = Background, 1 = Best Effort (normal), 2 = Video, 3 = Voice 1823 * TX FIFOs above 3 use same value (typically 0) as TX FIFO 3. 1824 */ 1825 u8 start_rate_idx[LINK_QUAL_AC_NUM]; 1826 } __packed; 1827 1828 #define LINK_QUAL_AGG_TIME_LIMIT_DEF (4000) /* 4 milliseconds */ 1829 #define LINK_QUAL_AGG_TIME_LIMIT_MAX (8000) 1830 #define LINK_QUAL_AGG_TIME_LIMIT_MIN (100) 1831 1832 #define LINK_QUAL_AGG_DISABLE_START_DEF (3) 1833 #define LINK_QUAL_AGG_DISABLE_START_MAX (255) 1834 #define LINK_QUAL_AGG_DISABLE_START_MIN (0) 1835 1836 #define LINK_QUAL_AGG_FRAME_LIMIT_DEF (31) 1837 #define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63) 1838 #define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0) 1839 1840 /** 1841 * struct il_link_qual_agg_params 1842 * 1843 * Used in C_TX_LINK_QUALITY_CMD 1844 */ 1845 struct il_link_qual_agg_params { 1846 1847 /* 1848 *Maximum number of uSec in aggregation. 1849 * default set to 4000 (4 milliseconds) if not configured in .cfg 1850 */ 1851 __le16 agg_time_limit; 1852 1853 /* 1854 * Number of Tx retries allowed for a frame, before that frame will 1855 * no longer be considered for the start of an aggregation sequence 1856 * (scheduler will then try to tx it as single frame). 1857 * Driver should set this to 3. 1858 */ 1859 u8 agg_dis_start_th; 1860 1861 /* 1862 * Maximum number of frames in aggregation. 1863 * 0 = no limit (default). 1 = no aggregation. 1864 * Other values = max # frames in aggregation. 1865 */ 1866 u8 agg_frame_cnt_limit; 1867 1868 __le32 reserved; 1869 } __packed; 1870 1871 /* 1872 * C_TX_LINK_QUALITY_CMD = 0x4e (command, has simple generic response) 1873 * 1874 * For 4965 devices only; 3945 uses C_RATE_SCALE. 1875 * 1876 * Each station in the 4965 device's internal station table has its own table 1877 * of 16 1878 * Tx rates and modulation modes (e.g. legacy/SISO/MIMO) for retrying Tx when 1879 * an ACK is not received. This command replaces the entire table for 1880 * one station. 1881 * 1882 * NOTE: Station must already be in 4965 device's station table. 1883 * Use C_ADD_STA. 1884 * 1885 * The rate scaling procedures described below work well. Of course, other 1886 * procedures are possible, and may work better for particular environments. 1887 * 1888 * 1889 * FILLING THE RATE TBL 1890 * 1891 * Given a particular initial rate and mode, as determined by the rate 1892 * scaling algorithm described below, the Linux driver uses the following 1893 * formula to fill the rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table in the 1894 * Link Quality command: 1895 * 1896 * 1897 * 1) If using High-throughput (HT) (SISO or MIMO) initial rate: 1898 * a) Use this same initial rate for first 3 entries. 1899 * b) Find next lower available rate using same mode (SISO or MIMO), 1900 * use for next 3 entries. If no lower rate available, switch to 1901 * legacy mode (no HT40 channel, no MIMO, no short guard interval). 1902 * c) If using MIMO, set command's mimo_delimiter to number of entries 1903 * using MIMO (3 or 6). 1904 * d) After trying 2 HT rates, switch to legacy mode (no HT40 channel, 1905 * no MIMO, no short guard interval), at the next lower bit rate 1906 * (e.g. if second HT bit rate was 54, try 48 legacy), and follow 1907 * legacy procedure for remaining table entries. 1908 * 1909 * 2) If using legacy initial rate: 1910 * a) Use the initial rate for only one entry. 1911 * b) For each following entry, reduce the rate to next lower available 1912 * rate, until reaching the lowest available rate. 1913 * c) When reducing rate, also switch antenna selection. 1914 * d) Once lowest available rate is reached, repeat this rate until 1915 * rate table is filled (16 entries), switching antenna each entry. 1916 * 1917 * 1918 * ACCUMULATING HISTORY 1919 * 1920 * The rate scaling algorithm for 4965 devices, as implemented in Linux driver, 1921 * uses two sets of frame Tx success history: One for the current/active 1922 * modulation mode, and one for a speculative/search mode that is being 1923 * attempted. If the speculative mode turns out to be more effective (i.e. 1924 * actual transfer rate is better), then the driver continues to use the 1925 * speculative mode as the new current active mode. 1926 * 1927 * Each history set contains, separately for each possible rate, data for a 1928 * sliding win of the 62 most recent tx attempts at that rate. The data 1929 * includes a shifting bitmap of success(1)/failure(0), and sums of successful 1930 * and attempted frames, from which the driver can additionally calculate a 1931 * success ratio (success / attempted) and number of failures 1932 * (attempted - success), and control the size of the win (attempted). 1933 * The driver uses the bit map to remove successes from the success sum, as 1934 * the oldest tx attempts fall out of the win. 1935 * 1936 * When the 4965 device makes multiple tx attempts for a given frame, each 1937 * attempt might be at a different rate, and have different modulation 1938 * characteristics (e.g. antenna, fat channel, short guard interval), as set 1939 * up in the rate scaling table in the Link Quality command. The driver must 1940 * determine which rate table entry was used for each tx attempt, to determine 1941 * which rate-specific history to update, and record only those attempts that 1942 * match the modulation characteristics of the history set. 1943 * 1944 * When using block-ack (aggregation), all frames are transmitted at the same 1945 * rate, since there is no per-attempt acknowledgment from the destination 1946 * station. The Tx response struct il_tx_resp indicates the Tx rate in 1947 * rate_n_flags field. After receiving a block-ack, the driver can update 1948 * history for the entire block all at once. 1949 * 1950 * 1951 * FINDING BEST STARTING RATE: 1952 * 1953 * When working with a selected initial modulation mode (see below), the 1954 * driver attempts to find a best initial rate. The initial rate is the 1955 * first entry in the Link Quality command's rate table. 1956 * 1957 * 1) Calculate actual throughput (success ratio * expected throughput, see 1958 * table below) for current initial rate. Do this only if enough frames 1959 * have been attempted to make the value meaningful: at least 6 failed 1960 * tx attempts, or at least 8 successes. If not enough, don't try rate 1961 * scaling yet. 1962 * 1963 * 2) Find available rates adjacent to current initial rate. Available means: 1964 * a) supported by hardware && 1965 * b) supported by association && 1966 * c) within any constraints selected by user 1967 * 1968 * 3) Gather measured throughputs for adjacent rates. These might not have 1969 * enough history to calculate a throughput. That's okay, we might try 1970 * using one of them anyway! 1971 * 1972 * 4) Try decreasing rate if, for current rate: 1973 * a) success ratio is < 15% || 1974 * b) lower adjacent rate has better measured throughput || 1975 * c) higher adjacent rate has worse throughput, and lower is unmeasured 1976 * 1977 * As a sanity check, if decrease was determined above, leave rate 1978 * unchanged if: 1979 * a) lower rate unavailable 1980 * b) success ratio at current rate > 85% (very good) 1981 * c) current measured throughput is better than expected throughput 1982 * of lower rate (under perfect 100% tx conditions, see table below) 1983 * 1984 * 5) Try increasing rate if, for current rate: 1985 * a) success ratio is < 15% || 1986 * b) both adjacent rates' throughputs are unmeasured (try it!) || 1987 * b) higher adjacent rate has better measured throughput || 1988 * c) lower adjacent rate has worse throughput, and higher is unmeasured 1989 * 1990 * As a sanity check, if increase was determined above, leave rate 1991 * unchanged if: 1992 * a) success ratio at current rate < 70%. This is not particularly 1993 * good performance; higher rate is sure to have poorer success. 1994 * 1995 * 6) Re-evaluate the rate after each tx frame. If working with block- 1996 * acknowledge, history and stats may be calculated for the entire 1997 * block (including prior history that fits within the history wins), 1998 * before re-evaluation. 1999 * 2000 * FINDING BEST STARTING MODULATION MODE: 2001 * 2002 * After working with a modulation mode for a "while" (and doing rate scaling), 2003 * the driver searches for a new initial mode in an attempt to improve 2004 * throughput. The "while" is measured by numbers of attempted frames: 2005 * 2006 * For legacy mode, search for new mode after: 2007 * 480 successful frames, or 160 failed frames 2008 * For high-throughput modes (SISO or MIMO), search for new mode after: 2009 * 4500 successful frames, or 400 failed frames 2010 * 2011 * Mode switch possibilities are (3 for each mode): 2012 * 2013 * For legacy: 2014 * Change antenna, try SISO (if HT association), try MIMO (if HT association) 2015 * For SISO: 2016 * Change antenna, try MIMO, try shortened guard interval (SGI) 2017 * For MIMO: 2018 * Try SISO antenna A, SISO antenna B, try shortened guard interval (SGI) 2019 * 2020 * When trying a new mode, use the same bit rate as the old/current mode when 2021 * trying antenna switches and shortened guard interval. When switching to 2022 * SISO from MIMO or legacy, or to MIMO from SISO or legacy, use a rate 2023 * for which the expected throughput (under perfect conditions) is about the 2024 * same or slightly better than the actual measured throughput delivered by 2025 * the old/current mode. 2026 * 2027 * Actual throughput can be estimated by multiplying the expected throughput 2028 * by the success ratio (successful / attempted tx frames). Frame size is 2029 * not considered in this calculation; it assumes that frame size will average 2030 * out to be fairly consistent over several samples. The following are 2031 * metric values for expected throughput assuming 100% success ratio. 2032 * Only G band has support for CCK rates: 2033 * 2034 * RATE: 1 2 5 11 6 9 12 18 24 36 48 54 60 2035 * 2036 * G: 7 13 35 58 40 57 72 98 121 154 177 186 186 2037 * A: 0 0 0 0 40 57 72 98 121 154 177 186 186 2038 * SISO 20MHz: 0 0 0 0 42 42 76 102 124 159 183 193 202 2039 * SGI SISO 20MHz: 0 0 0 0 46 46 82 110 132 168 192 202 211 2040 * MIMO 20MHz: 0 0 0 0 74 74 123 155 179 214 236 244 251 2041 * SGI MIMO 20MHz: 0 0 0 0 81 81 131 164 188 222 243 251 257 2042 * SISO 40MHz: 0 0 0 0 77 77 127 160 184 220 242 250 257 2043 * SGI SISO 40MHz: 0 0 0 0 83 83 135 169 193 229 250 257 264 2044 * MIMO 40MHz: 0 0 0 0 123 123 182 214 235 264 279 285 289 2045 * SGI MIMO 40MHz: 0 0 0 0 131 131 191 222 242 270 284 289 293 2046 * 2047 * After the new mode has been tried for a short while (minimum of 6 failed 2048 * frames or 8 successful frames), compare success ratio and actual throughput 2049 * estimate of the new mode with the old. If either is better with the new 2050 * mode, continue to use the new mode. 2051 * 2052 * Continue comparing modes until all 3 possibilities have been tried. 2053 * If moving from legacy to HT, try all 3 possibilities from the new HT 2054 * mode. After trying all 3, a best mode is found. Continue to use this mode 2055 * for the longer "while" described above (e.g. 480 successful frames for 2056 * legacy), and then repeat the search process. 2057 * 2058 */ 2059 struct il_link_quality_cmd { 2060 2061 /* Index of destination/recipient station in uCode's station table */ 2062 u8 sta_id; 2063 u8 reserved1; 2064 __le16 control; /* not used */ 2065 struct il_link_qual_general_params general_params; 2066 struct il_link_qual_agg_params agg_params; 2067 2068 /* 2069 * Rate info; when using rate-scaling, Tx command's initial_rate_idx 2070 * specifies 1st Tx rate attempted, via idx into this table. 2071 * 4965 devices works its way through table when retrying Tx. 2072 */ 2073 struct { 2074 __le32 rate_n_flags; /* RATE_MCS_*, RATE_* */ 2075 } rs_table[LINK_QUAL_MAX_RETRY_NUM]; 2076 __le32 reserved2; 2077 } __packed; 2078 2079 /* 2080 * BT configuration enable flags: 2081 * bit 0 - 1: BT channel announcement enabled 2082 * 0: disable 2083 * bit 1 - 1: priority of BT device enabled 2084 * 0: disable 2085 */ 2086 #define BT_COEX_DISABLE (0x0) 2087 #define BT_ENABLE_CHANNEL_ANNOUNCE BIT(0) 2088 #define BT_ENABLE_PRIORITY BIT(1) 2089 2090 #define BT_COEX_ENABLE (BT_ENABLE_CHANNEL_ANNOUNCE | BT_ENABLE_PRIORITY) 2091 2092 #define BT_LEAD_TIME_DEF (0x1E) 2093 2094 #define BT_MAX_KILL_DEF (0x5) 2095 2096 /* 2097 * C_BT_CONFIG = 0x9b (command, has simple generic response) 2098 * 2099 * 3945 and 4965 devices support hardware handshake with Bluetooth device on 2100 * same platform. Bluetooth device alerts wireless device when it will Tx; 2101 * wireless device can delay or kill its own Tx to accommodate. 2102 */ 2103 struct il_bt_cmd { 2104 u8 flags; 2105 u8 lead_time; 2106 u8 max_kill; 2107 u8 reserved; 2108 __le32 kill_ack_mask; 2109 __le32 kill_cts_mask; 2110 } __packed; 2111 2112 /****************************************************************************** 2113 * (6) 2114 * Spectrum Management (802.11h) Commands, Responses, Notifications: 2115 * 2116 *****************************************************************************/ 2117 2118 /* 2119 * Spectrum Management 2120 */ 2121 #define MEASUREMENT_FILTER_FLAG (RXON_FILTER_PROMISC_MSK | \ 2122 RXON_FILTER_CTL2HOST_MSK | \ 2123 RXON_FILTER_ACCEPT_GRP_MSK | \ 2124 RXON_FILTER_DIS_DECRYPT_MSK | \ 2125 RXON_FILTER_DIS_GRP_DECRYPT_MSK | \ 2126 RXON_FILTER_ASSOC_MSK | \ 2127 RXON_FILTER_BCON_AWARE_MSK) 2128 2129 struct il_measure_channel { 2130 __le32 duration; /* measurement duration in extended beacon 2131 * format */ 2132 u8 channel; /* channel to measure */ 2133 u8 type; /* see enum il_measure_type */ 2134 __le16 reserved; 2135 } __packed; 2136 2137 /* 2138 * C_SPECTRUM_MEASUREMENT = 0x74 (command) 2139 */ 2140 struct il_spectrum_cmd { 2141 __le16 len; /* number of bytes starting from token */ 2142 u8 token; /* token id */ 2143 u8 id; /* measurement id -- 0 or 1 */ 2144 u8 origin; /* 0 = TGh, 1 = other, 2 = TGk */ 2145 u8 periodic; /* 1 = periodic */ 2146 __le16 path_loss_timeout; 2147 __le32 start_time; /* start time in extended beacon format */ 2148 __le32 reserved2; 2149 __le32 flags; /* rxon flags */ 2150 __le32 filter_flags; /* rxon filter flags */ 2151 __le16 channel_count; /* minimum 1, maximum 10 */ 2152 __le16 reserved3; 2153 struct il_measure_channel channels[10]; 2154 } __packed; 2155 2156 /* 2157 * C_SPECTRUM_MEASUREMENT = 0x74 (response) 2158 */ 2159 struct il_spectrum_resp { 2160 u8 token; 2161 u8 id; /* id of the prior command replaced, or 0xff */ 2162 __le16 status; /* 0 - command will be handled 2163 * 1 - cannot handle (conflicts with another 2164 * measurement) */ 2165 } __packed; 2166 2167 enum il_measurement_state { 2168 IL_MEASUREMENT_START = 0, 2169 IL_MEASUREMENT_STOP = 1, 2170 }; 2171 2172 enum il_measurement_status { 2173 IL_MEASUREMENT_OK = 0, 2174 IL_MEASUREMENT_CONCURRENT = 1, 2175 IL_MEASUREMENT_CSA_CONFLICT = 2, 2176 IL_MEASUREMENT_TGH_CONFLICT = 3, 2177 /* 4-5 reserved */ 2178 IL_MEASUREMENT_STOPPED = 6, 2179 IL_MEASUREMENT_TIMEOUT = 7, 2180 IL_MEASUREMENT_PERIODIC_FAILED = 8, 2181 }; 2182 2183 #define NUM_ELEMENTS_IN_HISTOGRAM 8 2184 2185 struct il_measurement_histogram { 2186 __le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 0.8usec counts */ 2187 __le32 cck[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 1usec counts */ 2188 } __packed; 2189 2190 /* clear channel availability counters */ 2191 struct il_measurement_cca_counters { 2192 __le32 ofdm; 2193 __le32 cck; 2194 } __packed; 2195 2196 enum il_measure_type { 2197 IL_MEASURE_BASIC = (1 << 0), 2198 IL_MEASURE_CHANNEL_LOAD = (1 << 1), 2199 IL_MEASURE_HISTOGRAM_RPI = (1 << 2), 2200 IL_MEASURE_HISTOGRAM_NOISE = (1 << 3), 2201 IL_MEASURE_FRAME = (1 << 4), 2202 /* bits 5:6 are reserved */ 2203 IL_MEASURE_IDLE = (1 << 7), 2204 }; 2205 2206 /* 2207 * N_SPECTRUM_MEASUREMENT = 0x75 (notification only, not a command) 2208 */ 2209 struct il_spectrum_notification { 2210 u8 id; /* measurement id -- 0 or 1 */ 2211 u8 token; 2212 u8 channel_idx; /* idx in measurement channel list */ 2213 u8 state; /* 0 - start, 1 - stop */ 2214 __le32 start_time; /* lower 32-bits of TSF */ 2215 u8 band; /* 0 - 5.2GHz, 1 - 2.4GHz */ 2216 u8 channel; 2217 u8 type; /* see enum il_measurement_type */ 2218 u8 reserved1; 2219 /* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only 2220 * valid if applicable for measurement type requested. */ 2221 __le32 cca_ofdm; /* cca fraction time in 40Mhz clock periods */ 2222 __le32 cca_cck; /* cca fraction time in 44Mhz clock periods */ 2223 __le32 cca_time; /* channel load time in usecs */ 2224 u8 basic_type; /* 0 - bss, 1 - ofdm preamble, 2 - 2225 * unidentified */ 2226 u8 reserved2[3]; 2227 struct il_measurement_histogram histogram; 2228 __le32 stop_time; /* lower 32-bits of TSF */ 2229 __le32 status; /* see il_measurement_status */ 2230 } __packed; 2231 2232 /****************************************************************************** 2233 * (7) 2234 * Power Management Commands, Responses, Notifications: 2235 * 2236 *****************************************************************************/ 2237 2238 /** 2239 * struct il_powertable_cmd - Power Table Command 2240 * @flags: See below: 2241 * 2242 * C_POWER_TBL = 0x77 (command, has simple generic response) 2243 * 2244 * PM allow: 2245 * bit 0 - '0' Driver not allow power management 2246 * '1' Driver allow PM (use rest of parameters) 2247 * 2248 * uCode send sleep notifications: 2249 * bit 1 - '0' Don't send sleep notification 2250 * '1' send sleep notification (SEND_PM_NOTIFICATION) 2251 * 2252 * Sleep over DTIM 2253 * bit 2 - '0' PM have to walk up every DTIM 2254 * '1' PM could sleep over DTIM till listen Interval. 2255 * 2256 * PCI power managed 2257 * bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1) 2258 * '1' !(PCI_CFG_LINK_CTRL & 0x1) 2259 * 2260 * Fast PD 2261 * bit 4 - '1' Put radio to sleep when receiving frame for others 2262 * 2263 * Force sleep Modes 2264 * bit 31/30- '00' use both mac/xtal sleeps 2265 * '01' force Mac sleep 2266 * '10' force xtal sleep 2267 * '11' Illegal set 2268 * 2269 * NOTE: if sleep_interval[SLEEP_INTRVL_TBL_SIZE-1] > DTIM period then 2270 * ucode assume sleep over DTIM is allowed and we don't need to wake up 2271 * for every DTIM. 2272 */ 2273 #define IL_POWER_VEC_SIZE 5 2274 2275 #define IL_POWER_DRIVER_ALLOW_SLEEP_MSK cpu_to_le16(BIT(0)) 2276 #define IL_POWER_SLEEP_OVER_DTIM_MSK cpu_to_le16(BIT(2)) 2277 #define IL_POWER_PCI_PM_MSK cpu_to_le16(BIT(3)) 2278 2279 struct il3945_powertable_cmd { 2280 __le16 flags; 2281 u8 reserved[2]; 2282 __le32 rx_data_timeout; 2283 __le32 tx_data_timeout; 2284 __le32 sleep_interval[IL_POWER_VEC_SIZE]; 2285 } __packed; 2286 2287 struct il_powertable_cmd { 2288 __le16 flags; 2289 u8 keep_alive_seconds; /* 3945 reserved */ 2290 u8 debug_flags; /* 3945 reserved */ 2291 __le32 rx_data_timeout; 2292 __le32 tx_data_timeout; 2293 __le32 sleep_interval[IL_POWER_VEC_SIZE]; 2294 __le32 keep_alive_beacons; 2295 } __packed; 2296 2297 /* 2298 * N_PM_SLEEP = 0x7A (notification only, not a command) 2299 * all devices identical. 2300 */ 2301 struct il_sleep_notification { 2302 u8 pm_sleep_mode; 2303 u8 pm_wakeup_src; 2304 __le16 reserved; 2305 __le32 sleep_time; 2306 __le32 tsf_low; 2307 __le32 bcon_timer; 2308 } __packed; 2309 2310 /* Sleep states. all devices identical. */ 2311 enum { 2312 IL_PM_NO_SLEEP = 0, 2313 IL_PM_SLP_MAC = 1, 2314 IL_PM_SLP_FULL_MAC_UNASSOCIATE = 2, 2315 IL_PM_SLP_FULL_MAC_CARD_STATE = 3, 2316 IL_PM_SLP_PHY = 4, 2317 IL_PM_SLP_REPENT = 5, 2318 IL_PM_WAKEUP_BY_TIMER = 6, 2319 IL_PM_WAKEUP_BY_DRIVER = 7, 2320 IL_PM_WAKEUP_BY_RFKILL = 8, 2321 /* 3 reserved */ 2322 IL_PM_NUM_OF_MODES = 12, 2323 }; 2324 2325 /* 2326 * N_CARD_STATE = 0xa1 (notification only, not a command) 2327 */ 2328 struct il_card_state_notif { 2329 __le32 flags; 2330 } __packed; 2331 2332 #define HW_CARD_DISABLED 0x01 2333 #define SW_CARD_DISABLED 0x02 2334 #define CT_CARD_DISABLED 0x04 2335 #define RXON_CARD_DISABLED 0x10 2336 2337 struct il_ct_kill_config { 2338 __le32 reserved; 2339 __le32 critical_temperature_M; 2340 __le32 critical_temperature_R; 2341 } __packed; 2342 2343 /****************************************************************************** 2344 * (8) 2345 * Scan Commands, Responses, Notifications: 2346 * 2347 *****************************************************************************/ 2348 2349 #define SCAN_CHANNEL_TYPE_PASSIVE cpu_to_le32(0) 2350 #define SCAN_CHANNEL_TYPE_ACTIVE cpu_to_le32(1) 2351 2352 /** 2353 * struct il_scan_channel - entry in C_SCAN channel table 2354 * 2355 * One for each channel in the scan list. 2356 * Each channel can independently select: 2357 * 1) SSID for directed active scans 2358 * 2) Txpower setting (for rate specified within Tx command) 2359 * 3) How long to stay on-channel (behavior may be modified by quiet_time, 2360 * quiet_plcp_th, good_CRC_th) 2361 * 2362 * To avoid uCode errors, make sure the following are true (see comments 2363 * under struct il_scan_cmd about max_out_time and quiet_time): 2364 * 1) If using passive_dwell (i.e. passive_dwell != 0): 2365 * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0) 2366 * 2) quiet_time <= active_dwell 2367 * 3) If restricting off-channel time (i.e. max_out_time !=0): 2368 * passive_dwell < max_out_time 2369 * active_dwell < max_out_time 2370 */ 2371 struct il3945_scan_channel { 2372 /* 2373 * type is defined as: 2374 * 0:0 1 = active, 0 = passive 2375 * 1:4 SSID direct bit map; if a bit is set, then corresponding 2376 * SSID IE is transmitted in probe request. 2377 * 5:7 reserved 2378 */ 2379 u8 type; 2380 u8 channel; /* band is selected by il3945_scan_cmd "flags" field */ 2381 struct il3945_tx_power tpc; 2382 __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */ 2383 __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */ 2384 } __packed; 2385 2386 /* set number of direct probes u8 type */ 2387 #define IL39_SCAN_PROBE_MASK(n) ((BIT(n) | (BIT(n) - BIT(1)))) 2388 2389 struct il_scan_channel { 2390 /* 2391 * type is defined as: 2392 * 0:0 1 = active, 0 = passive 2393 * 1:20 SSID direct bit map; if a bit is set, then corresponding 2394 * SSID IE is transmitted in probe request. 2395 * 21:31 reserved 2396 */ 2397 __le32 type; 2398 __le16 channel; /* band is selected by il_scan_cmd "flags" field */ 2399 u8 tx_gain; /* gain for analog radio */ 2400 u8 dsp_atten; /* gain for DSP */ 2401 __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */ 2402 __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */ 2403 } __packed; 2404 2405 /* set number of direct probes __le32 type */ 2406 #define IL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1)))) 2407 2408 /** 2409 * struct il_ssid_ie - directed scan network information element 2410 * 2411 * Up to 20 of these may appear in C_SCAN (Note: Only 4 are in 2412 * 3945 SCAN api), selected by "type" bit field in struct il_scan_channel; 2413 * each channel may select different ssids from among the 20 (4) entries. 2414 * SSID IEs get transmitted in reverse order of entry. 2415 */ 2416 struct il_ssid_ie { 2417 u8 id; 2418 u8 len; 2419 u8 ssid[32]; 2420 } __packed; 2421 2422 #define PROBE_OPTION_MAX_3945 4 2423 #define PROBE_OPTION_MAX 20 2424 #define TX_CMD_LIFE_TIME_INFINITE cpu_to_le32(0xFFFFFFFF) 2425 #define IL_GOOD_CRC_TH_DISABLED 0 2426 #define IL_GOOD_CRC_TH_DEFAULT cpu_to_le16(1) 2427 #define IL_GOOD_CRC_TH_NEVER cpu_to_le16(0xffff) 2428 #define IL_MAX_SCAN_SIZE 1024 2429 #define IL_MAX_CMD_SIZE 4096 2430 2431 /* 2432 * C_SCAN = 0x80 (command) 2433 * 2434 * The hardware scan command is very powerful; the driver can set it up to 2435 * maintain (relatively) normal network traffic while doing a scan in the 2436 * background. The max_out_time and suspend_time control the ratio of how 2437 * long the device stays on an associated network channel ("service channel") 2438 * vs. how long it's away from the service channel, i.e. tuned to other channels 2439 * for scanning. 2440 * 2441 * max_out_time is the max time off-channel (in usec), and suspend_time 2442 * is how long (in "extended beacon" format) that the scan is "suspended" 2443 * after returning to the service channel. That is, suspend_time is the 2444 * time that we stay on the service channel, doing normal work, between 2445 * scan segments. The driver may set these parameters differently to support 2446 * scanning when associated vs. not associated, and light vs. heavy traffic 2447 * loads when associated. 2448 * 2449 * After receiving this command, the device's scan engine does the following; 2450 * 2451 * 1) Sends SCAN_START notification to driver 2452 * 2) Checks to see if it has time to do scan for one channel 2453 * 3) Sends NULL packet, with power-save (PS) bit set to 1, 2454 * to tell AP that we're going off-channel 2455 * 4) Tunes to first channel in scan list, does active or passive scan 2456 * 5) Sends SCAN_RESULT notification to driver 2457 * 6) Checks to see if it has time to do scan on *next* channel in list 2458 * 7) Repeats 4-6 until it no longer has time to scan the next channel 2459 * before max_out_time expires 2460 * 8) Returns to service channel 2461 * 9) Sends NULL packet with PS=0 to tell AP that we're back 2462 * 10) Stays on service channel until suspend_time expires 2463 * 11) Repeats entire process 2-10 until list is complete 2464 * 12) Sends SCAN_COMPLETE notification 2465 * 2466 * For fast, efficient scans, the scan command also has support for staying on 2467 * a channel for just a short time, if doing active scanning and getting no 2468 * responses to the transmitted probe request. This time is controlled by 2469 * quiet_time, and the number of received packets below which a channel is 2470 * considered "quiet" is controlled by quiet_plcp_threshold. 2471 * 2472 * For active scanning on channels that have regulatory restrictions against 2473 * blindly transmitting, the scan can listen before transmitting, to make sure 2474 * that there is already legitimate activity on the channel. If enough 2475 * packets are cleanly received on the channel (controlled by good_CRC_th, 2476 * typical value 1), the scan engine starts transmitting probe requests. 2477 * 2478 * Driver must use separate scan commands for 2.4 vs. 5 GHz bands. 2479 * 2480 * To avoid uCode errors, see timing restrictions described under 2481 * struct il_scan_channel. 2482 */ 2483 2484 struct il3945_scan_cmd { 2485 __le16 len; 2486 u8 reserved0; 2487 u8 channel_count; /* # channels in channel list */ 2488 __le16 quiet_time; /* dwell only this # millisecs on quiet channel 2489 * (only for active scan) */ 2490 __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */ 2491 __le16 good_CRC_th; /* passive -> active promotion threshold */ 2492 __le16 reserved1; 2493 __le32 max_out_time; /* max usec to be away from associated (service) 2494 * channel */ 2495 __le32 suspend_time; /* pause scan this long (in "extended beacon 2496 * format") when returning to service channel: 2497 * 3945; 31:24 # beacons, 19:0 additional usec, 2498 * 4965; 31:22 # beacons, 21:0 additional usec. 2499 */ 2500 __le32 flags; /* RXON_FLG_* */ 2501 __le32 filter_flags; /* RXON_FILTER_* */ 2502 2503 /* For active scans (set to all-0s for passive scans). 2504 * Does not include payload. Must specify Tx rate; no rate scaling. */ 2505 struct il3945_tx_cmd tx_cmd; 2506 2507 /* For directed active scans (set to all-0s otherwise) */ 2508 struct il_ssid_ie direct_scan[PROBE_OPTION_MAX_3945]; 2509 2510 /* 2511 * Probe request frame, followed by channel list. 2512 * 2513 * Size of probe request frame is specified by byte count in tx_cmd. 2514 * Channel list follows immediately after probe request frame. 2515 * Number of channels in list is specified by channel_count. 2516 * Each channel in list is of type: 2517 * 2518 * struct il3945_scan_channel channels[0]; 2519 * 2520 * NOTE: Only one band of channels can be scanned per pass. You 2521 * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait 2522 * for one scan to complete (i.e. receive N_SCAN_COMPLETE) 2523 * before requesting another scan. 2524 */ 2525 u8 data[]; 2526 } __packed; 2527 2528 struct il_scan_cmd { 2529 __le16 len; 2530 u8 reserved0; 2531 u8 channel_count; /* # channels in channel list */ 2532 __le16 quiet_time; /* dwell only this # millisecs on quiet channel 2533 * (only for active scan) */ 2534 __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */ 2535 __le16 good_CRC_th; /* passive -> active promotion threshold */ 2536 __le16 rx_chain; /* RXON_RX_CHAIN_* */ 2537 __le32 max_out_time; /* max usec to be away from associated (service) 2538 * channel */ 2539 __le32 suspend_time; /* pause scan this long (in "extended beacon 2540 * format") when returning to service chnl: 2541 * 3945; 31:24 # beacons, 19:0 additional usec, 2542 * 4965; 31:22 # beacons, 21:0 additional usec. 2543 */ 2544 __le32 flags; /* RXON_FLG_* */ 2545 __le32 filter_flags; /* RXON_FILTER_* */ 2546 2547 /* For active scans (set to all-0s for passive scans). 2548 * Does not include payload. Must specify Tx rate; no rate scaling. */ 2549 struct il_tx_cmd tx_cmd; 2550 2551 /* For directed active scans (set to all-0s otherwise) */ 2552 struct il_ssid_ie direct_scan[PROBE_OPTION_MAX]; 2553 2554 /* 2555 * Probe request frame, followed by channel list. 2556 * 2557 * Size of probe request frame is specified by byte count in tx_cmd. 2558 * Channel list follows immediately after probe request frame. 2559 * Number of channels in list is specified by channel_count. 2560 * Each channel in list is of type: 2561 * 2562 * struct il_scan_channel channels[0]; 2563 * 2564 * NOTE: Only one band of channels can be scanned per pass. You 2565 * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait 2566 * for one scan to complete (i.e. receive N_SCAN_COMPLETE) 2567 * before requesting another scan. 2568 */ 2569 u8 data[]; 2570 } __packed; 2571 2572 /* Can abort will notify by complete notification with abort status. */ 2573 #define CAN_ABORT_STATUS cpu_to_le32(0x1) 2574 /* complete notification statuses */ 2575 #define ABORT_STATUS 0x2 2576 2577 /* 2578 * C_SCAN = 0x80 (response) 2579 */ 2580 struct il_scanreq_notification { 2581 __le32 status; /* 1: okay, 2: cannot fulfill request */ 2582 } __packed; 2583 2584 /* 2585 * N_SCAN_START = 0x82 (notification only, not a command) 2586 */ 2587 struct il_scanstart_notification { 2588 __le32 tsf_low; 2589 __le32 tsf_high; 2590 __le32 beacon_timer; 2591 u8 channel; 2592 u8 band; 2593 u8 reserved[2]; 2594 __le32 status; 2595 } __packed; 2596 2597 #define SCAN_OWNER_STATUS 0x1 2598 #define MEASURE_OWNER_STATUS 0x2 2599 2600 #define IL_PROBE_STATUS_OK 0 2601 #define IL_PROBE_STATUS_TX_FAILED BIT(0) 2602 /* error statuses combined with TX_FAILED */ 2603 #define IL_PROBE_STATUS_FAIL_TTL BIT(1) 2604 #define IL_PROBE_STATUS_FAIL_BT BIT(2) 2605 2606 #define NUMBER_OF_STATS 1 /* first __le32 is good CRC */ 2607 /* 2608 * N_SCAN_RESULTS = 0x83 (notification only, not a command) 2609 */ 2610 struct il_scanresults_notification { 2611 u8 channel; 2612 u8 band; 2613 u8 probe_status; 2614 u8 num_probe_not_sent; /* not enough time to send */ 2615 __le32 tsf_low; 2616 __le32 tsf_high; 2617 __le32 stats[NUMBER_OF_STATS]; 2618 } __packed; 2619 2620 /* 2621 * N_SCAN_COMPLETE = 0x84 (notification only, not a command) 2622 */ 2623 struct il_scancomplete_notification { 2624 u8 scanned_channels; 2625 u8 status; 2626 u8 last_channel; 2627 __le32 tsf_low; 2628 __le32 tsf_high; 2629 } __packed; 2630 2631 /****************************************************************************** 2632 * (9) 2633 * IBSS/AP Commands and Notifications: 2634 * 2635 *****************************************************************************/ 2636 2637 enum il_ibss_manager { 2638 IL_NOT_IBSS_MANAGER = 0, 2639 IL_IBSS_MANAGER = 1, 2640 }; 2641 2642 /* 2643 * N_BEACON = 0x90 (notification only, not a command) 2644 */ 2645 2646 struct il3945_beacon_notif { 2647 struct il3945_tx_resp beacon_notify_hdr; 2648 __le32 low_tsf; 2649 __le32 high_tsf; 2650 __le32 ibss_mgr_status; 2651 } __packed; 2652 2653 struct il4965_beacon_notif { 2654 struct il4965_tx_resp beacon_notify_hdr; 2655 __le32 low_tsf; 2656 __le32 high_tsf; 2657 __le32 ibss_mgr_status; 2658 } __packed; 2659 2660 /* 2661 * C_TX_BEACON= 0x91 (command, has simple generic response) 2662 */ 2663 2664 struct il3945_tx_beacon_cmd { 2665 struct il3945_tx_cmd tx; 2666 __le16 tim_idx; 2667 u8 tim_size; 2668 u8 reserved1; 2669 struct ieee80211_hdr frame[]; /* beacon frame */ 2670 } __packed; 2671 2672 struct il_tx_beacon_cmd { 2673 struct il_tx_cmd tx; 2674 __le16 tim_idx; 2675 u8 tim_size; 2676 u8 reserved1; 2677 struct ieee80211_hdr frame[]; /* beacon frame */ 2678 } __packed; 2679 2680 /****************************************************************************** 2681 * (10) 2682 * Statistics Commands and Notifications: 2683 * 2684 *****************************************************************************/ 2685 2686 #define IL_TEMP_CONVERT 260 2687 2688 #define SUP_RATE_11A_MAX_NUM_CHANNELS 8 2689 #define SUP_RATE_11B_MAX_NUM_CHANNELS 4 2690 #define SUP_RATE_11G_MAX_NUM_CHANNELS 12 2691 2692 /* Used for passing to driver number of successes and failures per rate */ 2693 struct rate_histogram { 2694 union { 2695 __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; 2696 __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; 2697 __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; 2698 } success; 2699 union { 2700 __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; 2701 __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; 2702 __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; 2703 } failed; 2704 } __packed; 2705 2706 /* stats command response */ 2707 2708 struct iwl39_stats_rx_phy { 2709 __le32 ina_cnt; 2710 __le32 fina_cnt; 2711 __le32 plcp_err; 2712 __le32 crc32_err; 2713 __le32 overrun_err; 2714 __le32 early_overrun_err; 2715 __le32 crc32_good; 2716 __le32 false_alarm_cnt; 2717 __le32 fina_sync_err_cnt; 2718 __le32 sfd_timeout; 2719 __le32 fina_timeout; 2720 __le32 unresponded_rts; 2721 __le32 rxe_frame_limit_overrun; 2722 __le32 sent_ack_cnt; 2723 __le32 sent_cts_cnt; 2724 } __packed; 2725 2726 struct iwl39_stats_rx_non_phy { 2727 __le32 bogus_cts; /* CTS received when not expecting CTS */ 2728 __le32 bogus_ack; /* ACK received when not expecting ACK */ 2729 __le32 non_bssid_frames; /* number of frames with BSSID that 2730 * doesn't belong to the STA BSSID */ 2731 __le32 filtered_frames; /* count frames that were dumped in the 2732 * filtering process */ 2733 __le32 non_channel_beacons; /* beacons with our bss id but not on 2734 * our serving channel */ 2735 } __packed; 2736 2737 struct iwl39_stats_rx { 2738 struct iwl39_stats_rx_phy ofdm; 2739 struct iwl39_stats_rx_phy cck; 2740 struct iwl39_stats_rx_non_phy general; 2741 } __packed; 2742 2743 struct iwl39_stats_tx { 2744 __le32 preamble_cnt; 2745 __le32 rx_detected_cnt; 2746 __le32 bt_prio_defer_cnt; 2747 __le32 bt_prio_kill_cnt; 2748 __le32 few_bytes_cnt; 2749 __le32 cts_timeout; 2750 __le32 ack_timeout; 2751 __le32 expected_ack_cnt; 2752 __le32 actual_ack_cnt; 2753 } __packed; 2754 2755 struct stats_dbg { 2756 __le32 burst_check; 2757 __le32 burst_count; 2758 __le32 wait_for_silence_timeout_cnt; 2759 __le32 reserved[3]; 2760 } __packed; 2761 2762 struct iwl39_stats_div { 2763 __le32 tx_on_a; 2764 __le32 tx_on_b; 2765 __le32 exec_time; 2766 __le32 probe_time; 2767 } __packed; 2768 2769 struct iwl39_stats_general { 2770 __le32 temperature; 2771 struct stats_dbg dbg; 2772 __le32 sleep_time; 2773 __le32 slots_out; 2774 __le32 slots_idle; 2775 __le32 ttl_timestamp; 2776 struct iwl39_stats_div div; 2777 } __packed; 2778 2779 struct stats_rx_phy { 2780 __le32 ina_cnt; 2781 __le32 fina_cnt; 2782 __le32 plcp_err; 2783 __le32 crc32_err; 2784 __le32 overrun_err; 2785 __le32 early_overrun_err; 2786 __le32 crc32_good; 2787 __le32 false_alarm_cnt; 2788 __le32 fina_sync_err_cnt; 2789 __le32 sfd_timeout; 2790 __le32 fina_timeout; 2791 __le32 unresponded_rts; 2792 __le32 rxe_frame_limit_overrun; 2793 __le32 sent_ack_cnt; 2794 __le32 sent_cts_cnt; 2795 __le32 sent_ba_rsp_cnt; 2796 __le32 dsp_self_kill; 2797 __le32 mh_format_err; 2798 __le32 re_acq_main_rssi_sum; 2799 __le32 reserved3; 2800 } __packed; 2801 2802 struct stats_rx_ht_phy { 2803 __le32 plcp_err; 2804 __le32 overrun_err; 2805 __le32 early_overrun_err; 2806 __le32 crc32_good; 2807 __le32 crc32_err; 2808 __le32 mh_format_err; 2809 __le32 agg_crc32_good; 2810 __le32 agg_mpdu_cnt; 2811 __le32 agg_cnt; 2812 __le32 unsupport_mcs; 2813 } __packed; 2814 2815 #define INTERFERENCE_DATA_AVAILABLE cpu_to_le32(1) 2816 2817 struct stats_rx_non_phy { 2818 __le32 bogus_cts; /* CTS received when not expecting CTS */ 2819 __le32 bogus_ack; /* ACK received when not expecting ACK */ 2820 __le32 non_bssid_frames; /* number of frames with BSSID that 2821 * doesn't belong to the STA BSSID */ 2822 __le32 filtered_frames; /* count frames that were dumped in the 2823 * filtering process */ 2824 __le32 non_channel_beacons; /* beacons with our bss id but not on 2825 * our serving channel */ 2826 __le32 channel_beacons; /* beacons with our bss id and in our 2827 * serving channel */ 2828 __le32 num_missed_bcon; /* number of missed beacons */ 2829 __le32 adc_rx_saturation_time; /* count in 0.8us units the time the 2830 * ADC was in saturation */ 2831 __le32 ina_detection_search_time; /* total time (in 0.8us) searched 2832 * for INA */ 2833 __le32 beacon_silence_rssi_a; /* RSSI silence after beacon frame */ 2834 __le32 beacon_silence_rssi_b; /* RSSI silence after beacon frame */ 2835 __le32 beacon_silence_rssi_c; /* RSSI silence after beacon frame */ 2836 __le32 interference_data_flag; /* flag for interference data 2837 * availability. 1 when data is 2838 * available. */ 2839 __le32 channel_load; /* counts RX Enable time in uSec */ 2840 __le32 dsp_false_alarms; /* DSP false alarm (both OFDM 2841 * and CCK) counter */ 2842 __le32 beacon_rssi_a; 2843 __le32 beacon_rssi_b; 2844 __le32 beacon_rssi_c; 2845 __le32 beacon_energy_a; 2846 __le32 beacon_energy_b; 2847 __le32 beacon_energy_c; 2848 } __packed; 2849 2850 struct stats_rx { 2851 struct stats_rx_phy ofdm; 2852 struct stats_rx_phy cck; 2853 struct stats_rx_non_phy general; 2854 struct stats_rx_ht_phy ofdm_ht; 2855 } __packed; 2856 2857 /** 2858 * struct stats_tx_power - current tx power 2859 * 2860 * @ant_a: current tx power on chain a in 1/2 dB step 2861 * @ant_b: current tx power on chain b in 1/2 dB step 2862 * @ant_c: current tx power on chain c in 1/2 dB step 2863 */ 2864 struct stats_tx_power { 2865 u8 ant_a; 2866 u8 ant_b; 2867 u8 ant_c; 2868 u8 reserved; 2869 } __packed; 2870 2871 struct stats_tx_non_phy_agg { 2872 __le32 ba_timeout; 2873 __le32 ba_reschedule_frames; 2874 __le32 scd_query_agg_frame_cnt; 2875 __le32 scd_query_no_agg; 2876 __le32 scd_query_agg; 2877 __le32 scd_query_mismatch; 2878 __le32 frame_not_ready; 2879 __le32 underrun; 2880 __le32 bt_prio_kill; 2881 __le32 rx_ba_rsp_cnt; 2882 } __packed; 2883 2884 struct stats_tx { 2885 __le32 preamble_cnt; 2886 __le32 rx_detected_cnt; 2887 __le32 bt_prio_defer_cnt; 2888 __le32 bt_prio_kill_cnt; 2889 __le32 few_bytes_cnt; 2890 __le32 cts_timeout; 2891 __le32 ack_timeout; 2892 __le32 expected_ack_cnt; 2893 __le32 actual_ack_cnt; 2894 __le32 dump_msdu_cnt; 2895 __le32 burst_abort_next_frame_mismatch_cnt; 2896 __le32 burst_abort_missing_next_frame_cnt; 2897 __le32 cts_timeout_collision; 2898 __le32 ack_or_ba_timeout_collision; 2899 struct stats_tx_non_phy_agg agg; 2900 2901 __le32 reserved1; 2902 } __packed; 2903 2904 struct stats_div { 2905 __le32 tx_on_a; 2906 __le32 tx_on_b; 2907 __le32 exec_time; 2908 __le32 probe_time; 2909 __le32 reserved1; 2910 __le32 reserved2; 2911 } __packed; 2912 2913 struct stats_general_common { 2914 __le32 temperature; /* radio temperature */ 2915 struct stats_dbg dbg; 2916 __le32 sleep_time; 2917 __le32 slots_out; 2918 __le32 slots_idle; 2919 __le32 ttl_timestamp; 2920 struct stats_div div; 2921 __le32 rx_enable_counter; 2922 /* 2923 * num_of_sos_states: 2924 * count the number of times we have to re-tune 2925 * in order to get out of bad PHY status 2926 */ 2927 __le32 num_of_sos_states; 2928 } __packed; 2929 2930 struct stats_general { 2931 struct stats_general_common common; 2932 __le32 reserved2; 2933 __le32 reserved3; 2934 } __packed; 2935 2936 #define UCODE_STATS_CLEAR_MSK (0x1 << 0) 2937 #define UCODE_STATS_FREQUENCY_MSK (0x1 << 1) 2938 #define UCODE_STATS_NARROW_BAND_MSK (0x1 << 2) 2939 2940 /* 2941 * C_STATS = 0x9c, 2942 * all devices identical. 2943 * 2944 * This command triggers an immediate response containing uCode stats. 2945 * The response is in the same format as N_STATS 0x9d, below. 2946 * 2947 * If the CLEAR_STATS configuration flag is set, uCode will clear its 2948 * internal copy of the stats (counters) after issuing the response. 2949 * This flag does not affect N_STATSs after beacons (see below). 2950 * 2951 * If the DISABLE_NOTIF configuration flag is set, uCode will not issue 2952 * N_STATSs after received beacons (see below). This flag 2953 * does not affect the response to the C_STATS 0x9c itself. 2954 */ 2955 #define IL_STATS_CONF_CLEAR_STATS cpu_to_le32(0x1) /* see above */ 2956 #define IL_STATS_CONF_DISABLE_NOTIF cpu_to_le32(0x2) /* see above */ 2957 struct il_stats_cmd { 2958 __le32 configuration_flags; /* IL_STATS_CONF_* */ 2959 } __packed; 2960 2961 /* 2962 * N_STATS = 0x9d (notification only, not a command) 2963 * 2964 * By default, uCode issues this notification after receiving a beacon 2965 * while associated. To disable this behavior, set DISABLE_NOTIF flag in the 2966 * C_STATS 0x9c, above. 2967 * 2968 * Statistics counters continue to increment beacon after beacon, but are 2969 * cleared when changing channels or when driver issues C_STATS 2970 * 0x9c with CLEAR_STATS bit set (see above). 2971 * 2972 * uCode also issues this notification during scans. uCode clears stats 2973 * appropriately so that each notification contains stats for only the 2974 * one channel that has just been scanned. 2975 */ 2976 #define STATS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2) 2977 #define STATS_REPLY_FLG_HT40_MODE_MSK cpu_to_le32(0x8) 2978 2979 struct il3945_notif_stats { 2980 __le32 flag; 2981 struct iwl39_stats_rx rx; 2982 struct iwl39_stats_tx tx; 2983 struct iwl39_stats_general general; 2984 } __packed; 2985 2986 struct il_notif_stats { 2987 __le32 flag; 2988 struct stats_rx rx; 2989 struct stats_tx tx; 2990 struct stats_general general; 2991 } __packed; 2992 2993 /* 2994 * N_MISSED_BEACONS = 0xa2 (notification only, not a command) 2995 * 2996 * uCode send N_MISSED_BEACONS to driver when detect beacon missed 2997 * in regardless of how many missed beacons, which mean when driver receive the 2998 * notification, inside the command, it can find all the beacons information 2999 * which include number of total missed beacons, number of consecutive missed 3000 * beacons, number of beacons received and number of beacons expected to 3001 * receive. 3002 * 3003 * If uCode detected consecutive_missed_beacons > 5, it will reset the radio 3004 * in order to bring the radio/PHY back to working state; which has no relation 3005 * to when driver will perform sensitivity calibration. 3006 * 3007 * Driver should set it own missed_beacon_threshold to decide when to perform 3008 * sensitivity calibration based on number of consecutive missed beacons in 3009 * order to improve overall performance, especially in noisy environment. 3010 * 3011 */ 3012 3013 #define IL_MISSED_BEACON_THRESHOLD_MIN (1) 3014 #define IL_MISSED_BEACON_THRESHOLD_DEF (5) 3015 #define IL_MISSED_BEACON_THRESHOLD_MAX IL_MISSED_BEACON_THRESHOLD_DEF 3016 3017 struct il_missed_beacon_notif { 3018 __le32 consecutive_missed_beacons; 3019 __le32 total_missed_becons; 3020 __le32 num_expected_beacons; 3021 __le32 num_recvd_beacons; 3022 } __packed; 3023 3024 /****************************************************************************** 3025 * (11) 3026 * Rx Calibration Commands: 3027 * 3028 * With the uCode used for open source drivers, most Tx calibration (except 3029 * for Tx Power) and most Rx calibration is done by uCode during the 3030 * "initialize" phase of uCode boot. Driver must calibrate only: 3031 * 3032 * 1) Tx power (depends on temperature), described elsewhere 3033 * 2) Receiver gain balance (optimize MIMO, and detect disconnected antennas) 3034 * 3) Receiver sensitivity (to optimize signal detection) 3035 * 3036 *****************************************************************************/ 3037 3038 /** 3039 * C_SENSITIVITY = 0xa8 (command, has simple generic response) 3040 * 3041 * This command sets up the Rx signal detector for a sensitivity level that 3042 * is high enough to lock onto all signals within the associated network, 3043 * but low enough to ignore signals that are below a certain threshold, so as 3044 * not to have too many "false alarms". False alarms are signals that the 3045 * Rx DSP tries to lock onto, but then discards after determining that they 3046 * are noise. 3047 * 3048 * The optimum number of false alarms is between 5 and 50 per 200 TUs 3049 * (200 * 1024 uSecs, i.e. 204.8 milliseconds) of actual Rx time (i.e. 3050 * time listening, not transmitting). Driver must adjust sensitivity so that 3051 * the ratio of actual false alarms to actual Rx time falls within this range. 3052 * 3053 * While associated, uCode delivers N_STATSs after each 3054 * received beacon. These provide information to the driver to analyze the 3055 * sensitivity. Don't analyze stats that come in from scanning, or any 3056 * other non-associated-network source. Pertinent stats include: 3057 * 3058 * From "general" stats (struct stats_rx_non_phy): 3059 * 3060 * (beacon_energy_[abc] & 0x0FF00) >> 8 (unsigned, higher value is lower level) 3061 * Measure of energy of desired signal. Used for establishing a level 3062 * below which the device does not detect signals. 3063 * 3064 * (beacon_silence_rssi_[abc] & 0x0FF00) >> 8 (unsigned, units in dB) 3065 * Measure of background noise in silent period after beacon. 3066 * 3067 * channel_load 3068 * uSecs of actual Rx time during beacon period (varies according to 3069 * how much time was spent transmitting). 3070 * 3071 * From "cck" and "ofdm" stats (struct stats_rx_phy), separately: 3072 * 3073 * false_alarm_cnt 3074 * Signal locks abandoned early (before phy-level header). 3075 * 3076 * plcp_err 3077 * Signal locks abandoned late (during phy-level header). 3078 * 3079 * NOTE: Both false_alarm_cnt and plcp_err increment monotonically from 3080 * beacon to beacon, i.e. each value is an accumulation of all errors 3081 * before and including the latest beacon. Values will wrap around to 0 3082 * after counting up to 2^32 - 1. Driver must differentiate vs. 3083 * previous beacon's values to determine # false alarms in the current 3084 * beacon period. 3085 * 3086 * Total number of false alarms = false_alarms + plcp_errs 3087 * 3088 * For OFDM, adjust the following table entries in struct il_sensitivity_cmd 3089 * (notice that the start points for OFDM are at or close to settings for 3090 * maximum sensitivity): 3091 * 3092 * START / MIN / MAX 3093 * HD_AUTO_CORR32_X1_TH_ADD_MIN_IDX 90 / 85 / 120 3094 * HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_IDX 170 / 170 / 210 3095 * HD_AUTO_CORR32_X4_TH_ADD_MIN_IDX 105 / 105 / 140 3096 * HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_IDX 220 / 220 / 270 3097 * 3098 * If actual rate of OFDM false alarms (+ plcp_errors) is too high 3099 * (greater than 50 for each 204.8 msecs listening), reduce sensitivity 3100 * by *adding* 1 to all 4 of the table entries above, up to the max for 3101 * each entry. Conversely, if false alarm rate is too low (less than 5 3102 * for each 204.8 msecs listening), *subtract* 1 from each entry to 3103 * increase sensitivity. 3104 * 3105 * For CCK sensitivity, keep track of the following: 3106 * 3107 * 1). 20-beacon history of maximum background noise, indicated by 3108 * (beacon_silence_rssi_[abc] & 0x0FF00), units in dB, across the 3109 * 3 receivers. For any given beacon, the "silence reference" is 3110 * the maximum of last 60 samples (20 beacons * 3 receivers). 3111 * 3112 * 2). 10-beacon history of strongest signal level, as indicated 3113 * by (beacon_energy_[abc] & 0x0FF00) >> 8, across the 3 receivers, 3114 * i.e. the strength of the signal through the best receiver at the 3115 * moment. These measurements are "upside down", with lower values 3116 * for stronger signals, so max energy will be *minimum* value. 3117 * 3118 * Then for any given beacon, the driver must determine the *weakest* 3119 * of the strongest signals; this is the minimum level that needs to be 3120 * successfully detected, when using the best receiver at the moment. 3121 * "Max cck energy" is the maximum (higher value means lower energy!) 3122 * of the last 10 minima. Once this is determined, driver must add 3123 * a little margin by adding "6" to it. 3124 * 3125 * 3). Number of consecutive beacon periods with too few false alarms. 3126 * Reset this to 0 at the first beacon period that falls within the 3127 * "good" range (5 to 50 false alarms per 204.8 milliseconds rx). 3128 * 3129 * Then, adjust the following CCK table entries in struct il_sensitivity_cmd 3130 * (notice that the start points for CCK are at maximum sensitivity): 3131 * 3132 * START / MIN / MAX 3133 * HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX 125 / 125 / 200 3134 * HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX 200 / 200 / 400 3135 * HD_MIN_ENERGY_CCK_DET_IDX 100 / 0 / 100 3136 * 3137 * If actual rate of CCK false alarms (+ plcp_errors) is too high 3138 * (greater than 50 for each 204.8 msecs listening), method for reducing 3139 * sensitivity is: 3140 * 3141 * 1) *Add* 3 to value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX, 3142 * up to max 400. 3143 * 3144 * 2) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX is < 160, 3145 * sensitivity has been reduced a significant amount; bring it up to 3146 * a moderate 161. Otherwise, *add* 3, up to max 200. 3147 * 3148 * 3) a) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX is > 160, 3149 * sensitivity has been reduced only a moderate or small amount; 3150 * *subtract* 2 from value in HD_MIN_ENERGY_CCK_DET_IDX, 3151 * down to min 0. Otherwise (if gain has been significantly reduced), 3152 * don't change the HD_MIN_ENERGY_CCK_DET_IDX value. 3153 * 3154 * b) Save a snapshot of the "silence reference". 3155 * 3156 * If actual rate of CCK false alarms (+ plcp_errors) is too low 3157 * (less than 5 for each 204.8 msecs listening), method for increasing 3158 * sensitivity is used only if: 3159 * 3160 * 1a) Previous beacon did not have too many false alarms 3161 * 1b) AND difference between previous "silence reference" and current 3162 * "silence reference" (prev - current) is 2 or more, 3163 * OR 2) 100 or more consecutive beacon periods have had rate of 3164 * less than 5 false alarms per 204.8 milliseconds rx time. 3165 * 3166 * Method for increasing sensitivity: 3167 * 3168 * 1) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX, 3169 * down to min 125. 3170 * 3171 * 2) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX, 3172 * down to min 200. 3173 * 3174 * 3) *Add* 2 to value in HD_MIN_ENERGY_CCK_DET_IDX, up to max 100. 3175 * 3176 * If actual rate of CCK false alarms (+ plcp_errors) is within good range 3177 * (between 5 and 50 for each 204.8 msecs listening): 3178 * 3179 * 1) Save a snapshot of the silence reference. 3180 * 3181 * 2) If previous beacon had too many CCK false alarms (+ plcp_errors), 3182 * give some extra margin to energy threshold by *subtracting* 8 3183 * from value in HD_MIN_ENERGY_CCK_DET_IDX. 3184 * 3185 * For all cases (too few, too many, good range), make sure that the CCK 3186 * detection threshold (energy) is below the energy level for robust 3187 * detection over the past 10 beacon periods, the "Max cck energy". 3188 * Lower values mean higher energy; this means making sure that the value 3189 * in HD_MIN_ENERGY_CCK_DET_IDX is at or *above* "Max cck energy". 3190 * 3191 */ 3192 3193 /* 3194 * Table entries in C_SENSITIVITY (struct il_sensitivity_cmd) 3195 */ 3196 #define HD_TBL_SIZE (11) /* number of entries */ 3197 #define HD_MIN_ENERGY_CCK_DET_IDX (0) /* table idxes */ 3198 #define HD_MIN_ENERGY_OFDM_DET_IDX (1) 3199 #define HD_AUTO_CORR32_X1_TH_ADD_MIN_IDX (2) 3200 #define HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_IDX (3) 3201 #define HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX (4) 3202 #define HD_AUTO_CORR32_X4_TH_ADD_MIN_IDX (5) 3203 #define HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_IDX (6) 3204 #define HD_BARKER_CORR_TH_ADD_MIN_IDX (7) 3205 #define HD_BARKER_CORR_TH_ADD_MIN_MRC_IDX (8) 3206 #define HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX (9) 3207 #define HD_OFDM_ENERGY_TH_IN_IDX (10) 3208 3209 /* Control field in struct il_sensitivity_cmd */ 3210 #define C_SENSITIVITY_CONTROL_DEFAULT_TBL cpu_to_le16(0) 3211 #define C_SENSITIVITY_CONTROL_WORK_TBL cpu_to_le16(1) 3212 3213 /** 3214 * struct il_sensitivity_cmd 3215 * @control: (1) updates working table, (0) updates default table 3216 * @table: energy threshold values, use HD_* as idx into table 3217 * 3218 * Always use "1" in "control" to update uCode's working table and DSP. 3219 */ 3220 struct il_sensitivity_cmd { 3221 __le16 control; /* always use "1" */ 3222 __le16 table[HD_TBL_SIZE]; /* use HD_* as idx */ 3223 } __packed; 3224 3225 /** 3226 * C_PHY_CALIBRATION = 0xb0 (command, has simple generic response) 3227 * 3228 * This command sets the relative gains of 4965 device's 3 radio receiver chains. 3229 * 3230 * After the first association, driver should accumulate signal and noise 3231 * stats from the N_STATSs that follow the first 20 3232 * beacons from the associated network (don't collect stats that come 3233 * in from scanning, or any other non-network source). 3234 * 3235 * DISCONNECTED ANTENNA: 3236 * 3237 * Driver should determine which antennas are actually connected, by comparing 3238 * average beacon signal levels for the 3 Rx chains. Accumulate (add) the 3239 * following values over 20 beacons, one accumulator for each of the chains 3240 * a/b/c, from struct stats_rx_non_phy: 3241 * 3242 * beacon_rssi_[abc] & 0x0FF (unsigned, units in dB) 3243 * 3244 * Find the strongest signal from among a/b/c. Compare the other two to the 3245 * strongest. If any signal is more than 15 dB (times 20, unless you 3246 * divide the accumulated values by 20) below the strongest, the driver 3247 * considers that antenna to be disconnected, and should not try to use that 3248 * antenna/chain for Rx or Tx. If both A and B seem to be disconnected, 3249 * driver should declare the stronger one as connected, and attempt to use it 3250 * (A and B are the only 2 Tx chains!). 3251 * 3252 * 3253 * RX BALANCE: 3254 * 3255 * Driver should balance the 3 receivers (but just the ones that are connected 3256 * to antennas, see above) for gain, by comparing the average signal levels 3257 * detected during the silence after each beacon (background noise). 3258 * Accumulate (add) the following values over 20 beacons, one accumulator for 3259 * each of the chains a/b/c, from struct stats_rx_non_phy: 3260 * 3261 * beacon_silence_rssi_[abc] & 0x0FF (unsigned, units in dB) 3262 * 3263 * Find the weakest background noise level from among a/b/c. This Rx chain 3264 * will be the reference, with 0 gain adjustment. Attenuate other channels by 3265 * finding noise difference: 3266 * 3267 * (accum_noise[i] - accum_noise[reference]) / 30 3268 * 3269 * The "30" adjusts the dB in the 20 accumulated samples to units of 1.5 dB. 3270 * For use in diff_gain_[abc] fields of struct il_calibration_cmd, the 3271 * driver should limit the difference results to a range of 0-3 (0-4.5 dB), 3272 * and set bit 2 to indicate "reduce gain". The value for the reference 3273 * (weakest) chain should be "0". 3274 * 3275 * diff_gain_[abc] bit fields: 3276 * 2: (1) reduce gain, (0) increase gain 3277 * 1-0: amount of gain, units of 1.5 dB 3278 */ 3279 3280 /* Phy calibration command for series */ 3281 /* The default calibrate table size if not specified by firmware */ 3282 #define IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18 3283 enum { 3284 IL_PHY_CALIBRATE_DIFF_GAIN_CMD = 7, 3285 IL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE = 19, 3286 }; 3287 3288 #define IL_MAX_PHY_CALIBRATE_TBL_SIZE (253) 3289 3290 struct il_calib_hdr { 3291 u8 op_code; 3292 u8 first_group; 3293 u8 groups_num; 3294 u8 data_valid; 3295 } __packed; 3296 3297 /* IL_PHY_CALIBRATE_DIFF_GAIN_CMD (7) */ 3298 struct il_calib_diff_gain_cmd { 3299 struct il_calib_hdr hdr; 3300 s8 diff_gain_a; /* see above */ 3301 s8 diff_gain_b; 3302 s8 diff_gain_c; 3303 u8 reserved1; 3304 } __packed; 3305 3306 /****************************************************************************** 3307 * (12) 3308 * Miscellaneous Commands: 3309 * 3310 *****************************************************************************/ 3311 3312 /* 3313 * LEDs Command & Response 3314 * C_LEDS = 0x48 (command, has simple generic response) 3315 * 3316 * For each of 3 possible LEDs (Activity/Link/Tech, selected by "id" field), 3317 * this command turns it on or off, or sets up a periodic blinking cycle. 3318 */ 3319 struct il_led_cmd { 3320 __le32 interval; /* "interval" in uSec */ 3321 u8 id; /* 1: Activity, 2: Link, 3: Tech */ 3322 u8 off; /* # intervals off while blinking; 3323 * "0", with >0 "on" value, turns LED on */ 3324 u8 on; /* # intervals on while blinking; 3325 * "0", regardless of "off", turns LED off */ 3326 u8 reserved; 3327 } __packed; 3328 3329 /****************************************************************************** 3330 * (13) 3331 * Union of all expected notifications/responses: 3332 * 3333 *****************************************************************************/ 3334 3335 #define IL_RX_FRAME_SIZE_MSK 0x00003fff 3336 3337 struct il_rx_pkt { 3338 /* 3339 * The first 4 bytes of the RX frame header contain both the RX frame 3340 * size and some flags. 3341 * Bit fields: 3342 * 31: flag flush RB request 3343 * 30: flag ignore TC (terminal counter) request 3344 * 29: flag fast IRQ request 3345 * 28-14: Reserved 3346 * 13-00: RX frame size 3347 */ 3348 __le32 len_n_flags; 3349 struct il_cmd_header hdr; 3350 union { 3351 struct il3945_rx_frame rx_frame; 3352 struct il3945_tx_resp tx_resp; 3353 struct il3945_beacon_notif beacon_status; 3354 3355 struct il_alive_resp alive_frame; 3356 struct il_spectrum_notification spectrum_notif; 3357 struct il_csa_notification csa_notif; 3358 struct il_error_resp err_resp; 3359 struct il_card_state_notif card_state_notif; 3360 struct il_add_sta_resp add_sta; 3361 struct il_rem_sta_resp rem_sta; 3362 struct il_sleep_notification sleep_notif; 3363 struct il_spectrum_resp spectrum; 3364 struct il_notif_stats stats; 3365 struct il_compressed_ba_resp compressed_ba; 3366 struct il_missed_beacon_notif missed_beacon; 3367 __le32 status; 3368 u8 raw[0]; 3369 } u; 3370 } __packed; 3371 3372 #endif /* __il_commands_h__ */ 3373