1 /*
2 * This file is provided under a dual BSD/GPLv2 license. When using or
3 * redistributing this file, you may do so under either license.
4 *
5 * GPL LICENSE SUMMARY
6 *
7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of version 2 of the GNU General Public License as
11 * published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
23 *
24 * BSD LICENSE
25 *
26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27 * All rights reserved.
28 *
29 * Redistribution and use in source and binary forms, with or without
30 * modification, are permitted provided that the following conditions
31 * are met:
32 *
33 * * Redistributions of source code must retain the above copyright
34 * notice, this list of conditions and the following disclaimer.
35 * * Redistributions in binary form must reproduce the above copyright
36 * notice, this list of conditions and the following disclaimer in
37 * the documentation and/or other materials provided with the
38 * distribution.
39 * * Neither the name of Intel Corporation nor the names of its
40 * contributors may be used to endorse or promote products derived
41 * from this software without specific prior written permission.
42 *
43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
54 */
55
56 #ifndef _ISCI_REMOTE_DEVICE_H_
57 #define _ISCI_REMOTE_DEVICE_H_
58 #include <scsi/libsas.h>
59 #include <linux/kref.h>
60 #include "scu_remote_node_context.h"
61 #include "remote_node_context.h"
62 #include "port.h"
63
64 enum sci_remote_device_not_ready_reason_code {
65 SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED,
66 SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED,
67 SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED,
68 SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED,
69 SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED,
70 SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX
71 };
72
73 /**
74 * isci_remote_device - isci representation of a sas expander / end point
75 * @device_port_width: hw setting for number of simultaneous connections
76 * @connection_rate: per-taskcontext connection rate for this device
77 * @working_request: SATA requests have no tag we for unaccelerated
78 * protocols we need a method to associate unsolicited
79 * frames with a pending request
80 */
81 struct isci_remote_device {
82 #define IDEV_START_PENDING 0
83 #define IDEV_STOP_PENDING 1
84 #define IDEV_ALLOCATED 2
85 #define IDEV_GONE 3
86 #define IDEV_IO_READY 4
87 #define IDEV_IO_NCQERROR 5
88 #define IDEV_RNC_LLHANG_ENABLED 6
89 #define IDEV_ABORT_PATH_ACTIVE 7
90 #define IDEV_ABORT_PATH_RESUME_PENDING 8
91 unsigned long flags;
92 struct kref kref;
93 struct isci_port *isci_port;
94 struct domain_device *domain_dev;
95 struct list_head node;
96 struct sci_base_state_machine sm;
97 u32 device_port_width;
98 enum sas_linkrate connection_rate;
99 struct isci_port *owning_port;
100 struct sci_remote_node_context rnc;
101 /* XXX unify with device reference counting and delete */
102 u32 started_request_count;
103 struct isci_request *working_request;
104 u32 not_ready_reason;
105 scics_sds_remote_node_context_callback abort_resume_cb;
106 void *abort_resume_cbparam;
107 };
108
109 #define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000
110
111 /* device reference routines must be called under sci_lock */
isci_get_device(struct isci_remote_device * idev)112 static inline struct isci_remote_device *isci_get_device(
113 struct isci_remote_device *idev)
114 {
115 if (idev)
116 kref_get(&idev->kref);
117 return idev;
118 }
119
isci_lookup_device(struct domain_device * dev)120 static inline struct isci_remote_device *isci_lookup_device(struct domain_device *dev)
121 {
122 struct isci_remote_device *idev = dev->lldd_dev;
123
124 if (idev && !test_bit(IDEV_GONE, &idev->flags)) {
125 kref_get(&idev->kref);
126 return idev;
127 }
128
129 return NULL;
130 }
131
132 void isci_remote_device_release(struct kref *kref);
isci_put_device(struct isci_remote_device * idev)133 static inline void isci_put_device(struct isci_remote_device *idev)
134 {
135 if (idev)
136 kref_put(&idev->kref, isci_remote_device_release);
137 }
138
139 enum sci_status isci_remote_device_stop(struct isci_host *ihost,
140 struct isci_remote_device *idev);
141 void isci_remote_device_nuke_requests(struct isci_host *ihost,
142 struct isci_remote_device *idev);
143 void isci_remote_device_gone(struct domain_device *domain_dev);
144 int isci_remote_device_found(struct domain_device *domain_dev);
145
146 /**
147 * sci_remote_device_stop() - This method will stop both transmission and
148 * reception of link activity for the supplied remote device. This method
149 * disables normal IO requests from flowing through to the remote device.
150 * @remote_device: This parameter specifies the device to be stopped.
151 * @timeout: This parameter specifies the number of milliseconds in which the
152 * stop operation should complete.
153 *
154 * An indication of whether the device was successfully stopped. SCI_SUCCESS
155 * This value is returned if the transmission and reception for the device was
156 * successfully stopped.
157 */
158 enum sci_status sci_remote_device_stop(
159 struct isci_remote_device *idev,
160 u32 timeout);
161
162 /**
163 * sci_remote_device_reset() - This method will reset the device making it
164 * ready for operation. This method must be called anytime the device is
165 * reset either through a SMP phy control or a port hard reset request.
166 * @remote_device: This parameter specifies the device to be reset.
167 *
168 * This method does not actually cause the device hardware to be reset. This
169 * method resets the software object so that it will be operational after a
170 * device hardware reset completes. An indication of whether the device reset
171 * was accepted. SCI_SUCCESS This value is returned if the device reset is
172 * started.
173 */
174 enum sci_status sci_remote_device_reset(
175 struct isci_remote_device *idev);
176
177 /**
178 * sci_remote_device_reset_complete() - This method informs the device object
179 * that the reset operation is complete and the device can resume operation
180 * again.
181 * @remote_device: This parameter specifies the device which is to be informed
182 * of the reset complete operation.
183 *
184 * An indication that the device is resuming operation. SCI_SUCCESS the device
185 * is resuming operation.
186 */
187 enum sci_status sci_remote_device_reset_complete(
188 struct isci_remote_device *idev);
189
190 /**
191 * enum sci_remote_device_states - This enumeration depicts all the states
192 * for the common remote device state machine.
193 * @SCI_DEV_INITIAL: Simply the initial state for the base remote device
194 * state machine.
195 *
196 * @SCI_DEV_STOPPED: This state indicates that the remote device has
197 * successfully been stopped. In this state no new IO operations are
198 * permitted. This state is entered from the INITIAL state. This state
199 * is entered from the STOPPING state.
200 *
201 * @SCI_DEV_STARTING: This state indicates the the remote device is in
202 * the process of becoming ready (i.e. starting). In this state no new
203 * IO operations are permitted. This state is entered from the STOPPED
204 * state.
205 *
206 * @SCI_DEV_READY: This state indicates the remote device is now ready.
207 * Thus, the user is able to perform IO operations on the remote device.
208 * This state is entered from the STARTING state.
209 *
210 * @SCI_STP_DEV_IDLE: This is the idle substate for the stp remote
211 * device. When there are no active IO for the device it is is in this
212 * state.
213 *
214 * @SCI_STP_DEV_CMD: This is the command state for for the STP remote
215 * device. This state is entered when the device is processing a
216 * non-NCQ command. The device object will fail any new start IO
217 * requests until this command is complete.
218 *
219 * @SCI_STP_DEV_NCQ: This is the NCQ state for the STP remote device.
220 * This state is entered when the device is processing an NCQ reuqest.
221 * It will remain in this state so long as there is one or more NCQ
222 * requests being processed.
223 *
224 * @SCI_STP_DEV_NCQ_ERROR: This is the NCQ error state for the STP
225 * remote device. This state is entered when an SDB error FIS is
226 * received by the device object while in the NCQ state. The device
227 * object will only accept a READ LOG command while in this state.
228 *
229 * @SCI_STP_DEV_ATAPI_ERROR: This is the ATAPI error state for the STP
230 * ATAPI remote device. This state is entered when ATAPI device sends
231 * error status FIS without data while the device object is in CMD
232 * state. A suspension event is expected in this state. The device
233 * object will resume right away.
234 *
235 * @SCI_STP_DEV_AWAIT_RESET: This is the READY substate indicates the
236 * device is waiting for the RESET task coming to be recovered from
237 * certain hardware specific error.
238 *
239 * @SCI_SMP_DEV_IDLE: This is the ready operational substate for the
240 * remote device. This is the normal operational state for a remote
241 * device.
242 *
243 * @SCI_SMP_DEV_CMD: This is the suspended state for the remote device.
244 * This is the state that the device is placed in when a RNC suspend is
245 * received by the SCU hardware.
246 *
247 * @SCI_DEV_STOPPING: This state indicates that the remote device is in
248 * the process of stopping. In this state no new IO operations are
249 * permitted, but existing IO operations are allowed to complete. This
250 * state is entered from the READY state. This state is entered from
251 * the FAILED state.
252 *
253 * @SCI_DEV_FAILED: This state indicates that the remote device has
254 * failed. In this state no new IO operations are permitted. This
255 * state is entered from the INITIALIZING state. This state is entered
256 * from the READY state.
257 *
258 * @SCI_DEV_RESETTING: This state indicates the device is being reset.
259 * In this state no new IO operations are permitted. This state is
260 * entered from the READY state.
261 *
262 * @SCI_DEV_FINAL: Simply the final state for the base remote device
263 * state machine.
264 */
265 #define REMOTE_DEV_STATES {\
266 C(DEV_INITIAL),\
267 C(DEV_STOPPED),\
268 C(DEV_STARTING),\
269 C(DEV_READY),\
270 C(STP_DEV_IDLE),\
271 C(STP_DEV_CMD),\
272 C(STP_DEV_NCQ),\
273 C(STP_DEV_NCQ_ERROR),\
274 C(STP_DEV_ATAPI_ERROR),\
275 C(STP_DEV_AWAIT_RESET),\
276 C(SMP_DEV_IDLE),\
277 C(SMP_DEV_CMD),\
278 C(DEV_STOPPING),\
279 C(DEV_FAILED),\
280 C(DEV_RESETTING),\
281 C(DEV_FINAL),\
282 }
283 #undef C
284 #define C(a) SCI_##a
285 enum sci_remote_device_states REMOTE_DEV_STATES;
286 #undef C
287 const char *dev_state_name(enum sci_remote_device_states state);
288
rnc_to_dev(struct sci_remote_node_context * rnc)289 static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_context *rnc)
290 {
291 struct isci_remote_device *idev;
292
293 idev = container_of(rnc, typeof(*idev), rnc);
294
295 return idev;
296 }
297
sci_remote_device_decrement_request_count(struct isci_remote_device * idev)298 static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev)
299 {
300 /* XXX delete this voodoo when converting to the top-level device
301 * reference count
302 */
303 if (WARN_ONCE(idev->started_request_count == 0,
304 "%s: tried to decrement started_request_count past 0!?",
305 __func__))
306 /* pass */;
307 else
308 idev->started_request_count--;
309 }
310
311 void isci_dev_set_hang_detection_timeout(struct isci_remote_device *idev, u32 timeout);
312
313 enum sci_status sci_remote_device_frame_handler(
314 struct isci_remote_device *idev,
315 u32 frame_index);
316
317 enum sci_status sci_remote_device_event_handler(
318 struct isci_remote_device *idev,
319 u32 event_code);
320
321 enum sci_status sci_remote_device_start_io(
322 struct isci_host *ihost,
323 struct isci_remote_device *idev,
324 struct isci_request *ireq);
325
326 enum sci_status sci_remote_device_start_task(
327 struct isci_host *ihost,
328 struct isci_remote_device *idev,
329 struct isci_request *ireq);
330
331 enum sci_status sci_remote_device_complete_io(
332 struct isci_host *ihost,
333 struct isci_remote_device *idev,
334 struct isci_request *ireq);
335
336 void sci_remote_device_post_request(
337 struct isci_remote_device *idev,
338 u32 request);
339
340 enum sci_status sci_remote_device_terminate_requests(
341 struct isci_remote_device *idev);
342
343 int isci_remote_device_is_safe_to_abort(
344 struct isci_remote_device *idev);
345
346 enum sci_status
347 sci_remote_device_abort_requests_pending_abort(
348 struct isci_remote_device *idev);
349
350 enum sci_status isci_remote_device_suspend(
351 struct isci_host *ihost,
352 struct isci_remote_device *idev);
353
354 enum sci_status sci_remote_device_resume(
355 struct isci_remote_device *idev,
356 scics_sds_remote_node_context_callback cb_fn,
357 void *cb_p);
358
359 enum sci_status isci_remote_device_resume_from_abort(
360 struct isci_host *ihost,
361 struct isci_remote_device *idev);
362
363 enum sci_status isci_remote_device_reset(
364 struct isci_host *ihost,
365 struct isci_remote_device *idev);
366
367 enum sci_status isci_remote_device_reset_complete(
368 struct isci_host *ihost,
369 struct isci_remote_device *idev);
370
371 enum sci_status isci_remote_device_suspend_terminate(
372 struct isci_host *ihost,
373 struct isci_remote_device *idev,
374 struct isci_request *ireq);
375
376 enum sci_status isci_remote_device_terminate_requests(
377 struct isci_host *ihost,
378 struct isci_remote_device *idev,
379 struct isci_request *ireq);
380 enum sci_status sci_remote_device_suspend(struct isci_remote_device *idev,
381 enum sci_remote_node_suspension_reasons reason);
382 #endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */
383