1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (c) 2001-2002 by David Brownell
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of the GNU General Public License as published by the
7  * Free Software Foundation; either version 2 of the License, or (at your
8  * option) any later version.
9  *
10  * This program is distributed in the hope that it will be useful, but
11  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
12  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
13  * for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software Foundation,
17  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18  */
19 
20 #ifndef __LINUX_USB_EHCI_DEF_H
21 #define __LINUX_USB_EHCI_DEF_H
22 
23 #include <linux/usb/ehci-dbgp.h>
24 
25 /* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
26 
27 /* Section 2.2 Host Controller Capability Registers */
28 struct ehci_caps {
29 	/* these fields are specified as 8 and 16 bit registers,
30 	 * but some hosts can't perform 8 or 16 bit PCI accesses.
31 	 * some hosts treat caplength and hciversion as parts of a 32-bit
32 	 * register, others treat them as two separate registers, this
33 	 * affects the memory map for big endian controllers.
34 	 */
35 	u32		hc_capbase;
36 #define HC_LENGTH(ehci, p)	(0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
37 				(ehci_big_endian_capbase(ehci) ? 24 : 0)))
38 #define HC_VERSION(ehci, p)	(0xffff&((p) >> /* bits 31:16 / offset 02h */ \
39 				(ehci_big_endian_capbase(ehci) ? 0 : 16)))
40 	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
41 #define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
42 #define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
43 #define HCS_N_CC(p)		(((p)>>12)&0xf)	/* bits 15:12, #companion HCs */
44 #define HCS_N_PCC(p)		(((p)>>8)&0xf)	/* bits 11:8, ports per CC */
45 #define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
46 #define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
47 #define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
48 #define HCS_N_PORTS_MAX		15		/* N_PORTS valid 0x1-0xF */
49 
50 	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
51 /* EHCI 1.1 addendum */
52 #define HCC_32FRAME_PERIODIC_LIST(p)	((p)&(1 << 19))
53 #define HCC_PER_PORT_CHANGE_EVENT(p)	((p)&(1 << 18))
54 #define HCC_LPM(p)			((p)&(1 << 17))
55 #define HCC_HW_PREFETCH(p)		((p)&(1 << 16))
56 
57 #define HCC_EXT_CAPS(p)		(((p)>>8)&0xff)	/* for pci extended caps */
58 #define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
59 #define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
60 #define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
61 #define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
62 #define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
63 	u8		portroute[8];	 /* nibbles for routing - offset 0xC */
64 };
65 
66 
67 /* Section 2.3 Host Controller Operational Registers */
68 struct ehci_regs {
69 
70 	/* USBCMD: offset 0x00 */
71 	u32		command;
72 
73 /* EHCI 1.1 addendum */
74 #define CMD_HIRD	(0xf<<24)	/* host initiated resume duration */
75 #define CMD_PPCEE	(1<<15)		/* per port change event enable */
76 #define CMD_FSP		(1<<14)		/* fully synchronized prefetch */
77 #define CMD_ASPE	(1<<13)		/* async schedule prefetch enable */
78 #define CMD_PSPE	(1<<12)		/* periodic schedule prefetch enable */
79 /* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
80 #define CMD_PARK	(1<<11)		/* enable "park" on async qh */
81 #define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
82 #define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
83 #define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
84 #define CMD_ASE		(1<<5)		/* async schedule enable */
85 #define CMD_PSE		(1<<4)		/* periodic schedule enable */
86 /* 3:2 is periodic frame list size */
87 #define CMD_RESET	(1<<1)		/* reset HC not bus */
88 #define CMD_RUN		(1<<0)		/* start/stop HC */
89 
90 	/* USBSTS: offset 0x04 */
91 	u32		status;
92 #define STS_PPCE_MASK	(0xff<<16)	/* Per-Port change event 1-16 */
93 #define STS_ASS		(1<<15)		/* Async Schedule Status */
94 #define STS_PSS		(1<<14)		/* Periodic Schedule Status */
95 #define STS_RECL	(1<<13)		/* Reclamation */
96 #define STS_HALT	(1<<12)		/* Not running (any reason) */
97 /* some bits reserved */
98 	/* these STS_* flags are also intr_enable bits (USBINTR) */
99 #define STS_IAA		(1<<5)		/* Interrupted on async advance */
100 #define STS_FATAL	(1<<4)		/* such as some PCI access errors */
101 #define STS_FLR		(1<<3)		/* frame list rolled over */
102 #define STS_PCD		(1<<2)		/* port change detect */
103 #define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
104 #define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
105 
106 	/* USBINTR: offset 0x08 */
107 	u32		intr_enable;
108 
109 	/* FRINDEX: offset 0x0C */
110 	u32		frame_index;	/* current microframe number */
111 	/* CTRLDSSEGMENT: offset 0x10 */
112 	u32		segment;	/* address bits 63:32 if needed */
113 	/* PERIODICLISTBASE: offset 0x14 */
114 	u32		frame_list;	/* points to periodic list */
115 	/* ASYNCLISTADDR: offset 0x18 */
116 	u32		async_next;	/* address of next async queue head */
117 
118 	u32		reserved1[2];
119 
120 	/* TXFILLTUNING: offset 0x24 */
121 	u32		txfill_tuning;	/* TX FIFO Tuning register */
122 #define TXFIFO_DEFAULT	(8<<16)		/* FIFO burst threshold 8 */
123 
124 	u32		reserved2[6];
125 
126 	/* CONFIGFLAG: offset 0x40 */
127 	u32		configured_flag;
128 #define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
129 
130 	union {
131 		/* PORTSC: offset 0x44 */
132 		u32	port_status[HCS_N_PORTS_MAX];	/* up to N_PORTS */
133 /* EHCI 1.1 addendum */
134 #define PORTSC_SUSPEND_STS_ACK 0
135 #define PORTSC_SUSPEND_STS_NYET 1
136 #define PORTSC_SUSPEND_STS_STALL 2
137 #define PORTSC_SUSPEND_STS_ERR 3
138 
139 #define PORT_DEV_ADDR	(0x7f<<25)		/* device address */
140 #define PORT_SSTS	(0x3<<23)		/* suspend status */
141 /* 31:23 reserved */
142 #define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
143 #define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
144 #define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
145 /* 19:16 for port testing */
146 #define PORT_TEST(x)	(((x)&0xf)<<16)	/* Port Test Control */
147 #define PORT_TEST_PKT	PORT_TEST(0x4)	/* Port Test Control - packet test */
148 #define PORT_TEST_FORCE	PORT_TEST(0x5)	/* Port Test Control - force enable */
149 #define PORT_LED_OFF	(0<<14)
150 #define PORT_LED_AMBER	(1<<14)
151 #define PORT_LED_GREEN	(2<<14)
152 #define PORT_LED_MASK	(3<<14)
153 #define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
154 #define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
155 #define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))	/* USB 1.1 device */
156 #define PORT_LS_MASK	(3<<10)		/* Link status (SE0, K or J */
157 /* 9 reserved */
158 #define PORT_LPM	(1<<9)		/* LPM transaction */
159 #define PORT_RESET	(1<<8)		/* reset port */
160 #define PORT_SUSPEND	(1<<7)		/* suspend port */
161 #define PORT_RESUME	(1<<6)		/* resume it */
162 #define PORT_OCC	(1<<5)		/* over current change */
163 #define PORT_OC		(1<<4)		/* over current active */
164 #define PORT_PEC	(1<<3)		/* port enable change */
165 #define PORT_PE		(1<<2)		/* port enable */
166 #define PORT_CSC	(1<<1)		/* connect status change */
167 #define PORT_CONNECT	(1<<0)		/* device connected */
168 #define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
169 		struct {
170 			u32	reserved3[9];
171 			/* USBMODE: offset 0x68 */
172 			u32	usbmode;	/* USB Device mode */
173 		};
174 #define USBMODE_SDIS	(1<<3)		/* Stream disable */
175 #define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
176 #define USBMODE_CM_HC	(3<<0)		/* host controller mode */
177 #define USBMODE_CM_IDLE	(0<<0)		/* idle state */
178 	};
179 
180 /* Moorestown has some non-standard registers, partially due to the fact that
181  * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
182  * PORTSCx
183  */
184 	union {
185 		struct {
186 			u32	reserved4;
187 			/* HOSTPC: offset 0x84 */
188 			u32	hostpc[HCS_N_PORTS_MAX];
189 #define HOSTPC_PHCD	(1<<22)		/* Phy clock disable */
190 #define HOSTPC_PSPD	(3<<25)		/* Port speed detection */
191 		};
192 
193 		/* Broadcom-proprietary USB_EHCI_INSNREG00 @ 0x80 */
194 		u32	brcm_insnreg[4];
195 	};
196 
197 	u32		reserved5[2];
198 
199 	/* USBMODE_EX: offset 0xc8 */
200 	u32		usbmode_ex;	/* USB Device mode extension */
201 #define USBMODE_EX_VBPS	(1<<5)		/* VBus Power Select On */
202 #define USBMODE_EX_HC	(3<<0)		/* host controller mode */
203 };
204 
205 #endif /* __LINUX_USB_EHCI_DEF_H */
206