1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 #ifndef _ASM_X86_BOOTPARAM_H 3 #define _ASM_X86_BOOTPARAM_H 4 5 /* setup_data/setup_indirect types */ 6 #define SETUP_NONE 0 7 #define SETUP_E820_EXT 1 8 #define SETUP_DTB 2 9 #define SETUP_PCI 3 10 #define SETUP_EFI 4 11 #define SETUP_APPLE_PROPERTIES 5 12 #define SETUP_JAILHOUSE 6 13 #define SETUP_CC_BLOB 7 14 15 #define SETUP_INDIRECT (1<<31) 16 17 /* SETUP_INDIRECT | max(SETUP_*) */ 18 #define SETUP_TYPE_MAX (SETUP_INDIRECT | SETUP_CC_BLOB) 19 20 /* ram_size flags */ 21 #define RAMDISK_IMAGE_START_MASK 0x07FF 22 #define RAMDISK_PROMPT_FLAG 0x8000 23 #define RAMDISK_LOAD_FLAG 0x4000 24 25 /* loadflags */ 26 #define LOADED_HIGH (1<<0) 27 #define KASLR_FLAG (1<<1) 28 #define QUIET_FLAG (1<<5) 29 #define KEEP_SEGMENTS (1<<6) 30 #define CAN_USE_HEAP (1<<7) 31 32 /* xloadflags */ 33 #define XLF_KERNEL_64 (1<<0) 34 #define XLF_CAN_BE_LOADED_ABOVE_4G (1<<1) 35 #define XLF_EFI_HANDOVER_32 (1<<2) 36 #define XLF_EFI_HANDOVER_64 (1<<3) 37 #define XLF_EFI_KEXEC (1<<4) 38 #define XLF_5LEVEL (1<<5) 39 #define XLF_5LEVEL_ENABLED (1<<6) 40 41 #ifndef __ASSEMBLY__ 42 43 #include <linux/types.h> 44 #include <linux/screen_info.h> 45 #include <linux/apm_bios.h> 46 #include <linux/edd.h> 47 #include <asm/ist.h> 48 #include <video/edid.h> 49 50 /* extensible setup data list node */ 51 struct setup_data { 52 __u64 next; 53 __u32 type; 54 __u32 len; 55 __u8 data[0]; 56 }; 57 58 /* extensible setup indirect data node */ 59 struct setup_indirect { 60 __u32 type; 61 __u32 reserved; /* Reserved, must be set to zero. */ 62 __u64 len; 63 __u64 addr; 64 }; 65 66 struct setup_header { 67 __u8 setup_sects; 68 __u16 root_flags; 69 __u32 syssize; 70 __u16 ram_size; 71 __u16 vid_mode; 72 __u16 root_dev; 73 __u16 boot_flag; 74 __u16 jump; 75 __u32 header; 76 __u16 version; 77 __u32 realmode_swtch; 78 __u16 start_sys_seg; 79 __u16 kernel_version; 80 __u8 type_of_loader; 81 __u8 loadflags; 82 __u16 setup_move_size; 83 __u32 code32_start; 84 __u32 ramdisk_image; 85 __u32 ramdisk_size; 86 __u32 bootsect_kludge; 87 __u16 heap_end_ptr; 88 __u8 ext_loader_ver; 89 __u8 ext_loader_type; 90 __u32 cmd_line_ptr; 91 __u32 initrd_addr_max; 92 __u32 kernel_alignment; 93 __u8 relocatable_kernel; 94 __u8 min_alignment; 95 __u16 xloadflags; 96 __u32 cmdline_size; 97 __u32 hardware_subarch; 98 __u64 hardware_subarch_data; 99 __u32 payload_offset; 100 __u32 payload_length; 101 __u64 setup_data; 102 __u64 pref_address; 103 __u32 init_size; 104 __u32 handover_offset; 105 __u32 kernel_info_offset; 106 } __attribute__((packed)); 107 108 struct sys_desc_table { 109 __u16 length; 110 __u8 table[14]; 111 }; 112 113 /* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */ 114 struct olpc_ofw_header { 115 __u32 ofw_magic; /* OFW signature */ 116 __u32 ofw_version; 117 __u32 cif_handler; /* callback into OFW */ 118 __u32 irq_desc_table; 119 } __attribute__((packed)); 120 121 struct efi_info { 122 __u32 efi_loader_signature; 123 __u32 efi_systab; 124 __u32 efi_memdesc_size; 125 __u32 efi_memdesc_version; 126 __u32 efi_memmap; 127 __u32 efi_memmap_size; 128 __u32 efi_systab_hi; 129 __u32 efi_memmap_hi; 130 }; 131 132 /* 133 * This is the maximum number of entries in struct boot_params::e820_table 134 * (the zeropage), which is part of the x86 boot protocol ABI: 135 */ 136 #define E820_MAX_ENTRIES_ZEROPAGE 128 137 138 /* 139 * The E820 memory region entry of the boot protocol ABI: 140 */ 141 struct boot_e820_entry { 142 __u64 addr; 143 __u64 size; 144 __u32 type; 145 } __attribute__((packed)); 146 147 /* 148 * Smallest compatible version of jailhouse_setup_data required by this kernel. 149 */ 150 #define JAILHOUSE_SETUP_REQUIRED_VERSION 1 151 152 /* 153 * The boot loader is passing platform information via this Jailhouse-specific 154 * setup data structure. 155 */ 156 struct jailhouse_setup_data { 157 struct { 158 __u16 version; 159 __u16 compatible_version; 160 } __attribute__((packed)) hdr; 161 struct { 162 __u16 pm_timer_address; 163 __u16 num_cpus; 164 __u64 pci_mmconfig_base; 165 __u32 tsc_khz; 166 __u32 apic_khz; 167 __u8 standard_ioapic; 168 __u8 cpu_ids[255]; 169 } __attribute__((packed)) v1; 170 struct { 171 __u32 flags; 172 } __attribute__((packed)) v2; 173 } __attribute__((packed)); 174 175 /* The so-called "zeropage" */ 176 struct boot_params { 177 struct screen_info screen_info; /* 0x000 */ 178 struct apm_bios_info apm_bios_info; /* 0x040 */ 179 __u8 _pad2[4]; /* 0x054 */ 180 __u64 tboot_addr; /* 0x058 */ 181 struct ist_info ist_info; /* 0x060 */ 182 __u64 acpi_rsdp_addr; /* 0x070 */ 183 __u8 _pad3[8]; /* 0x078 */ 184 __u8 hd0_info[16]; /* obsolete! */ /* 0x080 */ 185 __u8 hd1_info[16]; /* obsolete! */ /* 0x090 */ 186 struct sys_desc_table sys_desc_table; /* obsolete! */ /* 0x0a0 */ 187 struct olpc_ofw_header olpc_ofw_header; /* 0x0b0 */ 188 __u32 ext_ramdisk_image; /* 0x0c0 */ 189 __u32 ext_ramdisk_size; /* 0x0c4 */ 190 __u32 ext_cmd_line_ptr; /* 0x0c8 */ 191 __u8 _pad4[112]; /* 0x0cc */ 192 __u32 cc_blob_address; /* 0x13c */ 193 struct edid_info edid_info; /* 0x140 */ 194 struct efi_info efi_info; /* 0x1c0 */ 195 __u32 alt_mem_k; /* 0x1e0 */ 196 __u32 scratch; /* Scratch field! */ /* 0x1e4 */ 197 __u8 e820_entries; /* 0x1e8 */ 198 __u8 eddbuf_entries; /* 0x1e9 */ 199 __u8 edd_mbr_sig_buf_entries; /* 0x1ea */ 200 __u8 kbd_status; /* 0x1eb */ 201 __u8 secure_boot; /* 0x1ec */ 202 __u8 _pad5[2]; /* 0x1ed */ 203 /* 204 * The sentinel is set to a nonzero value (0xff) in header.S. 205 * 206 * A bootloader is supposed to only take setup_header and put 207 * it into a clean boot_params buffer. If it turns out that 208 * it is clumsy or too generous with the buffer, it most 209 * probably will pick up the sentinel variable too. The fact 210 * that this variable then is still 0xff will let kernel 211 * know that some variables in boot_params are invalid and 212 * kernel should zero out certain portions of boot_params. 213 */ 214 __u8 sentinel; /* 0x1ef */ 215 __u8 _pad6[1]; /* 0x1f0 */ 216 struct setup_header hdr; /* setup header */ /* 0x1f1 */ 217 __u8 _pad7[0x290-0x1f1-sizeof(struct setup_header)]; 218 __u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX]; /* 0x290 */ 219 struct boot_e820_entry e820_table[E820_MAX_ENTRIES_ZEROPAGE]; /* 0x2d0 */ 220 __u8 _pad8[48]; /* 0xcd0 */ 221 struct edd_info eddbuf[EDDMAXNR]; /* 0xd00 */ 222 __u8 _pad9[276]; /* 0xeec */ 223 } __attribute__((packed)); 224 225 /** 226 * enum x86_hardware_subarch - x86 hardware subarchitecture 227 * 228 * The x86 hardware_subarch and hardware_subarch_data were added as of the x86 229 * boot protocol 2.07 to help distinguish and support custom x86 boot 230 * sequences. This enum represents accepted values for the x86 231 * hardware_subarch. Custom x86 boot sequences (not X86_SUBARCH_PC) do not 232 * have or simply *cannot* make use of natural stubs like BIOS or EFI, the 233 * hardware_subarch can be used on the Linux entry path to revector to a 234 * subarchitecture stub when needed. This subarchitecture stub can be used to 235 * set up Linux boot parameters or for special care to account for nonstandard 236 * handling of page tables. 237 * 238 * These enums should only ever be used by x86 code, and the code that uses 239 * it should be well contained and compartmentalized. 240 * 241 * KVM and Xen HVM do not have a subarch as these are expected to follow 242 * standard x86 boot entries. If there is a genuine need for "hypervisor" type 243 * that should be considered separately in the future. Future guest types 244 * should seriously consider working with standard x86 boot stubs such as 245 * the BIOS or EFI boot stubs. 246 * 247 * WARNING: this enum is only used for legacy hacks, for platform features that 248 * are not easily enumerated or discoverable. You should not ever use 249 * this for new features. 250 * 251 * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard 252 * PC mechanisms (PCI, ACPI) and doesn't need a special boot flow. 253 * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated 254 * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path, 255 * which start at asm startup_xen() entry point and later jump to the C 256 * xen_start_kernel() entry point. Both domU and dom0 type of guests are 257 * currently supported through this PV boot path. 258 * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform 259 * systems which do not have the PCI legacy interfaces. 260 * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC 261 * for settop boxes and media devices, the use of a subarch for CE4100 262 * is more of a hack... 263 */ 264 enum x86_hardware_subarch { 265 X86_SUBARCH_PC = 0, 266 X86_SUBARCH_LGUEST, 267 X86_SUBARCH_XEN, 268 X86_SUBARCH_INTEL_MID, 269 X86_SUBARCH_CE4100, 270 X86_NR_SUBARCHS, 271 }; 272 273 #endif /* __ASSEMBLY__ */ 274 275 #endif /* _ASM_X86_BOOTPARAM_H */ 276