1 /***********************license start***************
2 * Author: Cavium Networks
3 *
4 * Contact: support@caviumnetworks.com
5 * This file is part of the OCTEON SDK
6 *
7 * Copyright (c) 2003-2008 Cavium Networks
8 *
9 * This file is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License, Version 2, as
11 * published by the Free Software Foundation.
12 *
13 * This file is distributed in the hope that it will be useful, but
14 * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
15 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
16 * NONINFRINGEMENT. See the GNU General Public License for more
17 * details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this file; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 * or visit http://www.gnu.org/licenses/.
23 *
24 * This file may also be available under a different license from Cavium.
25 * Contact Cavium Networks for more information
26 ***********************license end**************************************/
27
28 /**
29 *
30 * Interface to the hardware Packet Output unit.
31 *
32 * Starting with SDK 1.7.0, the PKO output functions now support
33 * two types of locking. CVMX_PKO_LOCK_ATOMIC_TAG continues to
34 * function similarly to previous SDKs by using POW atomic tags
35 * to preserve ordering and exclusivity. As a new option, you
36 * can now pass CVMX_PKO_LOCK_CMD_QUEUE which uses a ll/sc
37 * memory based locking instead. This locking has the advantage
38 * of not affecting the tag state but doesn't preserve packet
39 * ordering. CVMX_PKO_LOCK_CMD_QUEUE is appropriate in most
40 * generic code while CVMX_PKO_LOCK_CMD_QUEUE should be used
41 * with hand tuned fast path code.
42 *
43 * Some of other SDK differences visible to the command queuing:
44 * - PKO indexes are no longer stored in the FAU. A large
45 * percentage of the FAU register block used to be tied up
46 * maintaining PKO queue pointers. These are now stored in a
47 * global named block.
48 * - The PKO <b>use_locking</b> parameter can now have a global
49 * effect. Since all application use the same named block,
50 * queue locking correctly applies across all operating
51 * systems when using CVMX_PKO_LOCK_CMD_QUEUE.
52 * - PKO 3 word commands are now supported. Use
53 * cvmx_pko_send_packet_finish3().
54 *
55 */
56
57 #ifndef __CVMX_PKO_H__
58 #define __CVMX_PKO_H__
59
60 #include <asm/octeon/cvmx-fpa.h>
61 #include <asm/octeon/cvmx-pow.h>
62 #include <asm/octeon/cvmx-cmd-queue.h>
63 #include <asm/octeon/cvmx-pko-defs.h>
64
65 /* Adjust the command buffer size by 1 word so that in the case of using only
66 * two word PKO commands no command words stradle buffers. The useful values
67 * for this are 0 and 1. */
68 #define CVMX_PKO_COMMAND_BUFFER_SIZE_ADJUST (1)
69
70 #define CVMX_PKO_MAX_OUTPUT_QUEUES_STATIC 256
71 #define CVMX_PKO_MAX_OUTPUT_QUEUES ((OCTEON_IS_MODEL(OCTEON_CN31XX) || \
72 OCTEON_IS_MODEL(OCTEON_CN3010) || OCTEON_IS_MODEL(OCTEON_CN3005) || \
73 OCTEON_IS_MODEL(OCTEON_CN50XX)) ? 32 : \
74 (OCTEON_IS_MODEL(OCTEON_CN58XX) || \
75 OCTEON_IS_MODEL(OCTEON_CN56XX)) ? 256 : 128)
76 #define CVMX_PKO_NUM_OUTPUT_PORTS 40
77 /* use this for queues that are not used */
78 #define CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID 63
79 #define CVMX_PKO_QUEUE_STATIC_PRIORITY 9
80 #define CVMX_PKO_ILLEGAL_QUEUE 0xFFFF
81 #define CVMX_PKO_MAX_QUEUE_DEPTH 0
82
83 typedef enum {
84 CVMX_PKO_SUCCESS,
85 CVMX_PKO_INVALID_PORT,
86 CVMX_PKO_INVALID_QUEUE,
87 CVMX_PKO_INVALID_PRIORITY,
88 CVMX_PKO_NO_MEMORY,
89 CVMX_PKO_PORT_ALREADY_SETUP,
90 CVMX_PKO_CMD_QUEUE_INIT_ERROR
91 } cvmx_pko_status_t;
92
93 /**
94 * This enumeration represents the differnet locking modes supported by PKO.
95 */
96 typedef enum {
97 /*
98 * PKO doesn't do any locking. It is the responsibility of the
99 * application to make sure that no other core is accessing
100 * the same queue at the same time
101 */
102 CVMX_PKO_LOCK_NONE = 0,
103 /*
104 * PKO performs an atomic tagswitch to insure exclusive access
105 * to the output queue. This will maintain packet ordering on
106 * output.
107 */
108 CVMX_PKO_LOCK_ATOMIC_TAG = 1,
109 /*
110 * PKO uses the common command queue locks to insure exclusive
111 * access to the output queue. This is a memory based
112 * ll/sc. This is the most portable locking mechanism.
113 */
114 CVMX_PKO_LOCK_CMD_QUEUE = 2,
115 } cvmx_pko_lock_t;
116
117 typedef struct {
118 uint32_t packets;
119 uint64_t octets;
120 uint64_t doorbell;
121 } cvmx_pko_port_status_t;
122
123 /**
124 * This structure defines the address to use on a packet enqueue
125 */
126 typedef union {
127 uint64_t u64;
128 struct {
129 #ifdef __BIG_ENDIAN_BITFIELD
130 /* Must CVMX_IO_SEG */
131 uint64_t mem_space:2;
132 /* Must be zero */
133 uint64_t reserved:13;
134 /* Must be one */
135 uint64_t is_io:1;
136 /* The ID of the device on the non-coherent bus */
137 uint64_t did:8;
138 /* Must be zero */
139 uint64_t reserved2:4;
140 /* Must be zero */
141 uint64_t reserved3:18;
142 /*
143 * The hardware likes to have the output port in
144 * addition to the output queue,
145 */
146 uint64_t port:6;
147 /*
148 * The output queue to send the packet to (0-127 are
149 * legal)
150 */
151 uint64_t queue:9;
152 /* Must be zero */
153 uint64_t reserved4:3;
154 #else
155 uint64_t reserved4:3;
156 uint64_t queue:9;
157 uint64_t port:9;
158 uint64_t reserved3:15;
159 uint64_t reserved2:4;
160 uint64_t did:8;
161 uint64_t is_io:1;
162 uint64_t reserved:13;
163 uint64_t mem_space:2;
164 #endif
165 } s;
166 } cvmx_pko_doorbell_address_t;
167
168 /**
169 * Structure of the first packet output command word.
170 */
171 union cvmx_pko_command_word0 {
172 uint64_t u64;
173 struct {
174 #ifdef __BIG_ENDIAN_BITFIELD
175 /*
176 * The size of the reg1 operation - could be 8, 16,
177 * 32, or 64 bits.
178 */
179 uint64_t size1:2;
180 /*
181 * The size of the reg0 operation - could be 8, 16,
182 * 32, or 64 bits.
183 */
184 uint64_t size0:2;
185 /*
186 * If set, subtract 1, if clear, subtract packet
187 * size.
188 */
189 uint64_t subone1:1;
190 /*
191 * The register, subtract will be done if reg1 is
192 * non-zero.
193 */
194 uint64_t reg1:11;
195 /* If set, subtract 1, if clear, subtract packet size */
196 uint64_t subone0:1;
197 /* The register, subtract will be done if reg0 is non-zero */
198 uint64_t reg0:11;
199 /*
200 * When set, interpret segment pointer and segment
201 * bytes in little endian order.
202 */
203 uint64_t le:1;
204 /*
205 * When set, packet data not allocated in L2 cache by
206 * PKO.
207 */
208 uint64_t n2:1;
209 /*
210 * If set and rsp is set, word3 contains a pointer to
211 * a work queue entry.
212 */
213 uint64_t wqp:1;
214 /* If set, the hardware will send a response when done */
215 uint64_t rsp:1;
216 /*
217 * If set, the supplied pkt_ptr is really a pointer to
218 * a list of pkt_ptr's.
219 */
220 uint64_t gather:1;
221 /*
222 * If ipoffp1 is non zero, (ipoffp1-1) is the number
223 * of bytes to IP header, and the hardware will
224 * calculate and insert the UDP/TCP checksum.
225 */
226 uint64_t ipoffp1:7;
227 /*
228 * If set, ignore the I bit (force to zero) from all
229 * pointer structures.
230 */
231 uint64_t ignore_i:1;
232 /*
233 * If clear, the hardware will attempt to free the
234 * buffers containing the packet.
235 */
236 uint64_t dontfree:1;
237 /*
238 * The total number of segs in the packet, if gather
239 * set, also gather list length.
240 */
241 uint64_t segs:6;
242 /* Including L2, but no trailing CRC */
243 uint64_t total_bytes:16;
244 #else
245 uint64_t total_bytes:16;
246 uint64_t segs:6;
247 uint64_t dontfree:1;
248 uint64_t ignore_i:1;
249 uint64_t ipoffp1:7;
250 uint64_t gather:1;
251 uint64_t rsp:1;
252 uint64_t wqp:1;
253 uint64_t n2:1;
254 uint64_t le:1;
255 uint64_t reg0:11;
256 uint64_t subone0:1;
257 uint64_t reg1:11;
258 uint64_t subone1:1;
259 uint64_t size0:2;
260 uint64_t size1:2;
261 #endif
262 } s;
263 };
264
265 /* CSR typedefs have been moved to cvmx-csr-*.h */
266
267 /**
268 * Definition of internal state for Packet output processing
269 */
270 typedef struct {
271 /* ptr to start of buffer, offset kept in FAU reg */
272 uint64_t *start_ptr;
273 } cvmx_pko_state_elem_t;
274
275 /**
276 * Call before any other calls to initialize the packet
277 * output system.
278 */
279 extern void cvmx_pko_initialize_global(void);
280
281 /**
282 * Enables the packet output hardware. It must already be
283 * configured.
284 */
285 extern void cvmx_pko_enable(void);
286
287 /**
288 * Disables the packet output. Does not affect any configuration.
289 */
290 extern void cvmx_pko_disable(void);
291
292 /**
293 * Shutdown and free resources required by packet output.
294 */
295
296 extern void cvmx_pko_shutdown(void);
297
298 /**
299 * Configure a output port and the associated queues for use.
300 *
301 * @port: Port to configure.
302 * @base_queue: First queue number to associate with this port.
303 * @num_queues: Number of queues t oassociate with this port
304 * @priority: Array of priority levels for each queue. Values are
305 * allowed to be 1-8. A value of 8 get 8 times the traffic
306 * of a value of 1. There must be num_queues elements in the
307 * array.
308 */
309 extern cvmx_pko_status_t cvmx_pko_config_port(uint64_t port,
310 uint64_t base_queue,
311 uint64_t num_queues,
312 const uint64_t priority[]);
313
314 /**
315 * Ring the packet output doorbell. This tells the packet
316 * output hardware that "len" command words have been added
317 * to its pending list. This command includes the required
318 * CVMX_SYNCWS before the doorbell ring.
319 *
320 * @port: Port the packet is for
321 * @queue: Queue the packet is for
322 * @len: Length of the command in 64 bit words
323 */
cvmx_pko_doorbell(uint64_t port,uint64_t queue,uint64_t len)324 static inline void cvmx_pko_doorbell(uint64_t port, uint64_t queue,
325 uint64_t len)
326 {
327 cvmx_pko_doorbell_address_t ptr;
328
329 ptr.u64 = 0;
330 ptr.s.mem_space = CVMX_IO_SEG;
331 ptr.s.did = CVMX_OCT_DID_PKT_SEND;
332 ptr.s.is_io = 1;
333 ptr.s.port = port;
334 ptr.s.queue = queue;
335 /*
336 * Need to make sure output queue data is in DRAM before
337 * doorbell write.
338 */
339 CVMX_SYNCWS;
340 cvmx_write_io(ptr.u64, len);
341 }
342
343 /**
344 * Prepare to send a packet. This may initiate a tag switch to
345 * get exclusive access to the output queue structure, and
346 * performs other prep work for the packet send operation.
347 *
348 * cvmx_pko_send_packet_finish() MUST be called after this function is called,
349 * and must be called with the same port/queue/use_locking arguments.
350 *
351 * The use_locking parameter allows the caller to use three
352 * possible locking modes.
353 * - CVMX_PKO_LOCK_NONE
354 * - PKO doesn't do any locking. It is the responsibility
355 * of the application to make sure that no other core
356 * is accessing the same queue at the same time.
357 * - CVMX_PKO_LOCK_ATOMIC_TAG
358 * - PKO performs an atomic tagswitch to insure exclusive
359 * access to the output queue. This will maintain
360 * packet ordering on output.
361 * - CVMX_PKO_LOCK_CMD_QUEUE
362 * - PKO uses the common command queue locks to insure
363 * exclusive access to the output queue. This is a
364 * memory based ll/sc. This is the most portable
365 * locking mechanism.
366 *
367 * NOTE: If atomic locking is used, the POW entry CANNOT be
368 * descheduled, as it does not contain a valid WQE pointer.
369 *
370 * @port: Port to send it on
371 * @queue: Queue to use
372 * @use_locking: CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or
373 * CVMX_PKO_LOCK_CMD_QUEUE
374 */
375
cvmx_pko_send_packet_prepare(uint64_t port,uint64_t queue,cvmx_pko_lock_t use_locking)376 static inline void cvmx_pko_send_packet_prepare(uint64_t port, uint64_t queue,
377 cvmx_pko_lock_t use_locking)
378 {
379 if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG) {
380 /*
381 * Must do a full switch here to handle all cases. We
382 * use a fake WQE pointer, as the POW does not access
383 * this memory. The WQE pointer and group are only
384 * used if this work is descheduled, which is not
385 * supported by the
386 * cvmx_pko_send_packet_prepare/cvmx_pko_send_packet_finish
387 * combination. Note that this is a special case in
388 * which these fake values can be used - this is not a
389 * general technique.
390 */
391 uint32_t tag =
392 CVMX_TAG_SW_BITS_INTERNAL << CVMX_TAG_SW_SHIFT |
393 CVMX_TAG_SUBGROUP_PKO << CVMX_TAG_SUBGROUP_SHIFT |
394 (CVMX_TAG_SUBGROUP_MASK & queue);
395 cvmx_pow_tag_sw_full((struct cvmx_wqe *) cvmx_phys_to_ptr(0x80), tag,
396 CVMX_POW_TAG_TYPE_ATOMIC, 0);
397 }
398 }
399
400 /**
401 * Complete packet output. cvmx_pko_send_packet_prepare() must be
402 * called exactly once before this, and the same parameters must be
403 * passed to both cvmx_pko_send_packet_prepare() and
404 * cvmx_pko_send_packet_finish().
405 *
406 * @port: Port to send it on
407 * @queue: Queue to use
408 * @pko_command:
409 * PKO HW command word
410 * @packet: Packet to send
411 * @use_locking: CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or
412 * CVMX_PKO_LOCK_CMD_QUEUE
413 *
414 * Returns: CVMX_PKO_SUCCESS on success, or error code on
415 * failure of output
416 */
cvmx_pko_send_packet_finish(uint64_t port,uint64_t queue,union cvmx_pko_command_word0 pko_command,union cvmx_buf_ptr packet,cvmx_pko_lock_t use_locking)417 static inline cvmx_pko_status_t cvmx_pko_send_packet_finish(
418 uint64_t port,
419 uint64_t queue,
420 union cvmx_pko_command_word0 pko_command,
421 union cvmx_buf_ptr packet,
422 cvmx_pko_lock_t use_locking)
423 {
424 cvmx_cmd_queue_result_t result;
425 if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG)
426 cvmx_pow_tag_sw_wait();
427 result = cvmx_cmd_queue_write2(CVMX_CMD_QUEUE_PKO(queue),
428 (use_locking == CVMX_PKO_LOCK_CMD_QUEUE),
429 pko_command.u64, packet.u64);
430 if (likely(result == CVMX_CMD_QUEUE_SUCCESS)) {
431 cvmx_pko_doorbell(port, queue, 2);
432 return CVMX_PKO_SUCCESS;
433 } else if ((result == CVMX_CMD_QUEUE_NO_MEMORY)
434 || (result == CVMX_CMD_QUEUE_FULL)) {
435 return CVMX_PKO_NO_MEMORY;
436 } else {
437 return CVMX_PKO_INVALID_QUEUE;
438 }
439 }
440
441 /**
442 * Complete packet output. cvmx_pko_send_packet_prepare() must be
443 * called exactly once before this, and the same parameters must be
444 * passed to both cvmx_pko_send_packet_prepare() and
445 * cvmx_pko_send_packet_finish().
446 *
447 * @port: Port to send it on
448 * @queue: Queue to use
449 * @pko_command:
450 * PKO HW command word
451 * @packet: Packet to send
452 * @addr: Plysical address of a work queue entry or physical address
453 * to zero on complete.
454 * @use_locking: CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or
455 * CVMX_PKO_LOCK_CMD_QUEUE
456 *
457 * Returns: CVMX_PKO_SUCCESS on success, or error code on
458 * failure of output
459 */
cvmx_pko_send_packet_finish3(uint64_t port,uint64_t queue,union cvmx_pko_command_word0 pko_command,union cvmx_buf_ptr packet,uint64_t addr,cvmx_pko_lock_t use_locking)460 static inline cvmx_pko_status_t cvmx_pko_send_packet_finish3(
461 uint64_t port,
462 uint64_t queue,
463 union cvmx_pko_command_word0 pko_command,
464 union cvmx_buf_ptr packet,
465 uint64_t addr,
466 cvmx_pko_lock_t use_locking)
467 {
468 cvmx_cmd_queue_result_t result;
469 if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG)
470 cvmx_pow_tag_sw_wait();
471 result = cvmx_cmd_queue_write3(CVMX_CMD_QUEUE_PKO(queue),
472 (use_locking == CVMX_PKO_LOCK_CMD_QUEUE),
473 pko_command.u64, packet.u64, addr);
474 if (likely(result == CVMX_CMD_QUEUE_SUCCESS)) {
475 cvmx_pko_doorbell(port, queue, 3);
476 return CVMX_PKO_SUCCESS;
477 } else if ((result == CVMX_CMD_QUEUE_NO_MEMORY)
478 || (result == CVMX_CMD_QUEUE_FULL)) {
479 return CVMX_PKO_NO_MEMORY;
480 } else {
481 return CVMX_PKO_INVALID_QUEUE;
482 }
483 }
484
485 /**
486 * Return the pko output queue associated with a port and a specific core.
487 * In normal mode (PKO lockless operation is disabled), the value returned
488 * is the base queue.
489 *
490 * @port: Port number
491 * @core: Core to get queue for
492 *
493 * Returns Core-specific output queue
494 */
cvmx_pko_get_base_queue_per_core(int port,int core)495 static inline int cvmx_pko_get_base_queue_per_core(int port, int core)
496 {
497 #ifndef CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0
498 #define CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0 16
499 #endif
500 #ifndef CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1
501 #define CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1 16
502 #endif
503
504 if (port < CVMX_PKO_MAX_PORTS_INTERFACE0)
505 return port * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 + core;
506 else if (port >= 16 && port < 16 + CVMX_PKO_MAX_PORTS_INTERFACE1)
507 return CVMX_PKO_MAX_PORTS_INTERFACE0 *
508 CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 + (port -
509 16) *
510 CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 + core;
511 else if ((port >= 32) && (port < 36))
512 return CVMX_PKO_MAX_PORTS_INTERFACE0 *
513 CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
514 CVMX_PKO_MAX_PORTS_INTERFACE1 *
515 CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 + (port -
516 32) *
517 CVMX_PKO_QUEUES_PER_PORT_PCI;
518 else if ((port >= 36) && (port < 40))
519 return CVMX_PKO_MAX_PORTS_INTERFACE0 *
520 CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
521 CVMX_PKO_MAX_PORTS_INTERFACE1 *
522 CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 +
523 4 * CVMX_PKO_QUEUES_PER_PORT_PCI + (port -
524 36) *
525 CVMX_PKO_QUEUES_PER_PORT_LOOP;
526 else
527 /* Given the limit on the number of ports we can map to
528 * CVMX_MAX_OUTPUT_QUEUES_STATIC queues (currently 256,
529 * divided among all cores), the remaining unmapped ports
530 * are assigned an illegal queue number */
531 return CVMX_PKO_ILLEGAL_QUEUE;
532 }
533
534 /**
535 * For a given port number, return the base pko output queue
536 * for the port.
537 *
538 * @port: Port number
539 * Returns Base output queue
540 */
cvmx_pko_get_base_queue(int port)541 static inline int cvmx_pko_get_base_queue(int port)
542 {
543 if (OCTEON_IS_MODEL(OCTEON_CN68XX))
544 return port;
545
546 return cvmx_pko_get_base_queue_per_core(port, 0);
547 }
548
549 /**
550 * For a given port number, return the number of pko output queues.
551 *
552 * @port: Port number
553 * Returns Number of output queues
554 */
cvmx_pko_get_num_queues(int port)555 static inline int cvmx_pko_get_num_queues(int port)
556 {
557 if (port < 16)
558 return CVMX_PKO_QUEUES_PER_PORT_INTERFACE0;
559 else if (port < 32)
560 return CVMX_PKO_QUEUES_PER_PORT_INTERFACE1;
561 else if (port < 36)
562 return CVMX_PKO_QUEUES_PER_PORT_PCI;
563 else if (port < 40)
564 return CVMX_PKO_QUEUES_PER_PORT_LOOP;
565 else
566 return 0;
567 }
568
569 /**
570 * Get the status counters for a port.
571 *
572 * @port_num: Port number to get statistics for.
573 * @clear: Set to 1 to clear the counters after they are read
574 * @status: Where to put the results.
575 */
cvmx_pko_get_port_status(uint64_t port_num,uint64_t clear,cvmx_pko_port_status_t * status)576 static inline void cvmx_pko_get_port_status(uint64_t port_num, uint64_t clear,
577 cvmx_pko_port_status_t *status)
578 {
579 union cvmx_pko_reg_read_idx pko_reg_read_idx;
580 union cvmx_pko_mem_count0 pko_mem_count0;
581 union cvmx_pko_mem_count1 pko_mem_count1;
582
583 pko_reg_read_idx.u64 = 0;
584 pko_reg_read_idx.s.index = port_num;
585 cvmx_write_csr(CVMX_PKO_REG_READ_IDX, pko_reg_read_idx.u64);
586
587 pko_mem_count0.u64 = cvmx_read_csr(CVMX_PKO_MEM_COUNT0);
588 status->packets = pko_mem_count0.s.count;
589 if (clear) {
590 pko_mem_count0.s.count = port_num;
591 cvmx_write_csr(CVMX_PKO_MEM_COUNT0, pko_mem_count0.u64);
592 }
593
594 pko_mem_count1.u64 = cvmx_read_csr(CVMX_PKO_MEM_COUNT1);
595 status->octets = pko_mem_count1.s.count;
596 if (clear) {
597 pko_mem_count1.s.count = port_num;
598 cvmx_write_csr(CVMX_PKO_MEM_COUNT1, pko_mem_count1.u64);
599 }
600
601 if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
602 union cvmx_pko_mem_debug9 debug9;
603 pko_reg_read_idx.s.index = cvmx_pko_get_base_queue(port_num);
604 cvmx_write_csr(CVMX_PKO_REG_READ_IDX, pko_reg_read_idx.u64);
605 debug9.u64 = cvmx_read_csr(CVMX_PKO_MEM_DEBUG9);
606 status->doorbell = debug9.cn38xx.doorbell;
607 } else {
608 union cvmx_pko_mem_debug8 debug8;
609 pko_reg_read_idx.s.index = cvmx_pko_get_base_queue(port_num);
610 cvmx_write_csr(CVMX_PKO_REG_READ_IDX, pko_reg_read_idx.u64);
611 debug8.u64 = cvmx_read_csr(CVMX_PKO_MEM_DEBUG8);
612 status->doorbell = debug8.cn50xx.doorbell;
613 }
614 }
615
616 /**
617 * Rate limit a PKO port to a max packets/sec. This function is only
618 * supported on CN57XX, CN56XX, CN55XX, and CN54XX.
619 *
620 * @port: Port to rate limit
621 * @packets_s: Maximum packet/sec
622 * @burst: Maximum number of packets to burst in a row before rate
623 * limiting cuts in.
624 *
625 * Returns Zero on success, negative on failure
626 */
627 extern int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst);
628
629 /**
630 * Rate limit a PKO port to a max bits/sec. This function is only
631 * supported on CN57XX, CN56XX, CN55XX, and CN54XX.
632 *
633 * @port: Port to rate limit
634 * @bits_s: PKO rate limit in bits/sec
635 * @burst: Maximum number of bits to burst before rate
636 * limiting cuts in.
637 *
638 * Returns Zero on success, negative on failure
639 */
640 extern int cvmx_pko_rate_limit_bits(int port, uint64_t bits_s, int burst);
641
642 #endif /* __CVMX_PKO_H__ */
643