1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * Copyright (C) 2012 ARM Ltd. 4 */ 5 #ifndef __ASM_CACHE_H 6 #define __ASM_CACHE_H 7 8 #include <asm/cputype.h> 9 #include <asm/mte-def.h> 10 11 #define CTR_L1IP_SHIFT 14 12 #define CTR_L1IP_MASK 3 13 #define CTR_DMINLINE_SHIFT 16 14 #define CTR_IMINLINE_SHIFT 0 15 #define CTR_IMINLINE_MASK 0xf 16 #define CTR_ERG_SHIFT 20 17 #define CTR_CWG_SHIFT 24 18 #define CTR_CWG_MASK 15 19 #define CTR_IDC_SHIFT 28 20 #define CTR_DIC_SHIFT 29 21 22 #define CTR_CACHE_MINLINE_MASK \ 23 (0xf << CTR_DMINLINE_SHIFT | CTR_IMINLINE_MASK << CTR_IMINLINE_SHIFT) 24 25 #define CTR_L1IP(ctr) (((ctr) >> CTR_L1IP_SHIFT) & CTR_L1IP_MASK) 26 27 #define ICACHE_POLICY_VPIPT 0 28 #define ICACHE_POLICY_RESERVED 1 29 #define ICACHE_POLICY_VIPT 2 30 #define ICACHE_POLICY_PIPT 3 31 32 #define L1_CACHE_SHIFT (6) 33 #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) 34 35 36 #define CLIDR_LOUU_SHIFT 27 37 #define CLIDR_LOC_SHIFT 24 38 #define CLIDR_LOUIS_SHIFT 21 39 40 #define CLIDR_LOUU(clidr) (((clidr) >> CLIDR_LOUU_SHIFT) & 0x7) 41 #define CLIDR_LOC(clidr) (((clidr) >> CLIDR_LOC_SHIFT) & 0x7) 42 #define CLIDR_LOUIS(clidr) (((clidr) >> CLIDR_LOUIS_SHIFT) & 0x7) 43 44 /* 45 * Memory returned by kmalloc() may be used for DMA, so we must make 46 * sure that all such allocations are cache aligned. Otherwise, 47 * unrelated code may cause parts of the buffer to be read into the 48 * cache before the transfer is done, causing old data to be seen by 49 * the CPU. 50 */ 51 #define ARCH_DMA_MINALIGN (128) 52 53 #ifndef __ASSEMBLY__ 54 55 #include <linux/bitops.h> 56 #include <linux/kasan-enabled.h> 57 58 #ifdef CONFIG_KASAN_SW_TAGS 59 #define ARCH_SLAB_MINALIGN (1ULL << KASAN_SHADOW_SCALE_SHIFT) 60 #elif defined(CONFIG_KASAN_HW_TAGS) arch_slab_minalign(void)61static inline unsigned int arch_slab_minalign(void) 62 { 63 return kasan_hw_tags_enabled() ? MTE_GRANULE_SIZE : 64 __alignof__(unsigned long long); 65 } 66 #define arch_slab_minalign() arch_slab_minalign() 67 #endif 68 69 #define ICACHEF_ALIASING 0 70 #define ICACHEF_VPIPT 1 71 extern unsigned long __icache_flags; 72 73 /* 74 * Whilst the D-side always behaves as PIPT on AArch64, aliasing is 75 * permitted in the I-cache. 76 */ icache_is_aliasing(void)77static inline int icache_is_aliasing(void) 78 { 79 return test_bit(ICACHEF_ALIASING, &__icache_flags); 80 } 81 icache_is_vpipt(void)82static __always_inline int icache_is_vpipt(void) 83 { 84 return test_bit(ICACHEF_VPIPT, &__icache_flags); 85 } 86 cache_type_cwg(void)87static inline u32 cache_type_cwg(void) 88 { 89 return (read_cpuid_cachetype() >> CTR_CWG_SHIFT) & CTR_CWG_MASK; 90 } 91 92 #define __read_mostly __section(".data..read_mostly") 93 cache_line_size_of_cpu(void)94static inline int cache_line_size_of_cpu(void) 95 { 96 u32 cwg = cache_type_cwg(); 97 98 return cwg ? 4 << cwg : ARCH_DMA_MINALIGN; 99 } 100 101 int cache_line_size(void); 102 103 /* 104 * Read the effective value of CTR_EL0. 105 * 106 * According to ARM ARM for ARMv8-A (ARM DDI 0487C.a), 107 * section D10.2.33 "CTR_EL0, Cache Type Register" : 108 * 109 * CTR_EL0.IDC reports the data cache clean requirements for 110 * instruction to data coherence. 111 * 112 * 0 - dcache clean to PoU is required unless : 113 * (CLIDR_EL1.LoC == 0) || (CLIDR_EL1.LoUIS == 0 && CLIDR_EL1.LoUU == 0) 114 * 1 - dcache clean to PoU is not required for i-to-d coherence. 115 * 116 * This routine provides the CTR_EL0 with the IDC field updated to the 117 * effective state. 118 */ read_cpuid_effective_cachetype(void)119static inline u32 __attribute_const__ read_cpuid_effective_cachetype(void) 120 { 121 u32 ctr = read_cpuid_cachetype(); 122 123 if (!(ctr & BIT(CTR_IDC_SHIFT))) { 124 u64 clidr = read_sysreg(clidr_el1); 125 126 if (CLIDR_LOC(clidr) == 0 || 127 (CLIDR_LOUIS(clidr) == 0 && CLIDR_LOUU(clidr) == 0)) 128 ctr |= BIT(CTR_IDC_SHIFT); 129 } 130 131 return ctr; 132 } 133 134 #endif /* __ASSEMBLY__ */ 135 136 #endif 137