1# SPDX-License-Identifier: GPL-2.0-only
2
3#
4# Light sensors
5#
6# When adding new entries keep the list in alphabetical order
7
8menu "Light sensors"
9
10config ACPI_ALS
11	tristate "ACPI Ambient Light Sensor"
12	depends on ACPI
13	select IIO_BUFFER
14	select IIO_TRIGGERED_BUFFER
15	select IIO_KFIFO_BUF
16	help
17	  Say Y here if you want to build a driver for the ACPI0008
18	  Ambient Light Sensor.
19
20	  To compile this driver as a module, choose M here: the module will
21	  be called acpi-als.
22
23config ADJD_S311
24	tristate "ADJD-S311-CR999 digital color sensor"
25	select IIO_BUFFER
26	select IIO_TRIGGERED_BUFFER
27	depends on I2C
28	help
29	  If you say yes here you get support for the Avago ADJD-S311-CR999
30	  digital color light sensor.
31
32	  This driver can also be built as a module.  If so, the module
33	  will be called adjd_s311.
34
35config ADUX1020
36	tristate "ADUX1020 photometric sensor"
37	select REGMAP_I2C
38	depends on I2C
39	help
40	 Say Y here if you want to build a driver for the Analog Devices
41	 ADUX1020 photometric sensor.
42
43	 To compile this driver as a module, choose M here: the
44	 module will be called adux1020.
45
46config AL3010
47	tristate "AL3010 ambient light sensor"
48	depends on I2C
49	help
50	  Say Y here if you want to build a driver for the Dyna Image AL3010
51	  ambient light sensor.
52
53	  To compile this driver as a module, choose M here: the
54	  module will be called al3010.
55
56config AL3320A
57	tristate "AL3320A ambient light sensor"
58	depends on I2C
59	help
60	  Say Y here if you want to build a driver for the Dyna Image AL3320A
61	  ambient light sensor.
62
63	  To compile this driver as a module, choose M here: the
64	  module will be called al3320a.
65
66config APDS9300
67	tristate "APDS9300 ambient light sensor"
68	depends on I2C
69	help
70	  Say Y here if you want to build a driver for the Avago APDS9300
71	  ambient light sensor.
72
73	  To compile this driver as a module, choose M here: the
74	  module will be called apds9300.
75
76config APDS9960
77	tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
78	select REGMAP_I2C
79	select IIO_BUFFER
80	select IIO_KFIFO_BUF
81	depends on I2C
82	help
83	  Say Y here to build I2C interface support for the Avago
84	  APDS9960 gesture/RGB/ALS/proximity sensor.
85
86	  To compile this driver as a module, choose M here: the
87	  module will be called apds9960
88
89config AS73211
90	tristate "AMS AS73211 XYZ color sensor"
91	depends on I2C
92	select IIO_BUFFER
93	select IIO_TRIGGERED_BUFFER
94	help
95	 If you say yes here you get support for the AMS AS73211
96	 JENCOLOR(R) Digital XYZ Sensor.
97
98	 For triggered measurements, you will need an additional trigger driver
99	 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER.
100
101	 This driver can also be built as a module.  If so, the module
102	 will be called as73211.
103
104config BH1750
105	tristate "ROHM BH1750 ambient light sensor"
106	depends on I2C
107	help
108	  Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
109	  BH1750, BH1751 ambient light sensors.
110
111	  To compile this driver as a module, choose M here: the module will
112	  be called bh1750.
113
114config BH1780
115	tristate "ROHM BH1780 ambient light sensor"
116	depends on I2C
117	help
118	  Say Y here to build support for the ROHM BH1780GLI ambient
119	  light sensor.
120
121	  To compile this driver as a module, choose M here: the module will
122	  be called bh1780.
123
124config CM32181
125	depends on I2C
126	tristate "CM32181 driver"
127	help
128	  Say Y here if you use cm32181.
129	  This option enables ambient light sensor using
130	  Capella cm32181 device driver.
131
132	  To compile this driver as a module, choose M here:
133	  the module will be called cm32181.
134
135config CM3232
136	depends on I2C
137	tristate "CM3232 ambient light sensor"
138	help
139	  Say Y here if you use cm3232.
140	  This option enables ambient light sensor using
141	  Capella Microsystems cm3232 device driver.
142
143	  To compile this driver as a module, choose M here:
144	  the module will be called cm3232.
145
146config CM3323
147	depends on I2C
148	tristate "Capella CM3323 color light sensor"
149	help
150	  Say Y here if you want to build a driver for Capella CM3323
151	  color sensor.
152
153	  To compile this driver as a module, choose M here: the module will
154	  be called cm3323.
155
156config CM3605
157	tristate "Capella CM3605 ambient light and proximity sensor"
158	help
159	  Say Y here if you want to build a driver for Capella CM3605
160	  ambient light and short range proximity sensor.
161
162	  To compile this driver as a module, choose M here: the module will
163	  be called cm3605.
164
165config CM36651
166	depends on I2C
167	tristate "CM36651 driver"
168	help
169	  Say Y here if you use cm36651.
170	  This option enables proximity & RGB sensor using
171	  Capella cm36651 device driver.
172
173	  To compile this driver as a module, choose M here:
174	  the module will be called cm36651.
175
176config IIO_CROS_EC_LIGHT_PROX
177	tristate "ChromeOS EC Light and Proximity Sensors"
178	depends on IIO_CROS_EC_SENSORS_CORE
179	help
180	  Say Y here if you use the light and proximity sensors
181	  presented by the ChromeOS EC Sensor hub.
182
183	  To compile this driver as a module, choose M here:
184	  the module will be called cros_ec_light_prox.
185
186config GP2AP002
187	tristate "Sharp GP2AP002 Proximity/ALS sensor"
188	depends on I2C
189	select REGMAP
190	help
191	  Say Y here if you have a Sharp GP2AP002 proximity/ALS combo-chip
192	  hooked to an I2C bus.
193
194	  To compile this driver as a module, choose M here: the
195	  module will be called gp2ap002.
196
197config GP2AP020A00F
198	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
199	depends on I2C
200	select REGMAP_I2C
201	select IIO_BUFFER
202	select IIO_TRIGGERED_BUFFER
203	select IRQ_WORK
204	help
205	  Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
206	  hooked to an I2C bus.
207
208	  To compile this driver as a module, choose M here: the
209	  module will be called gp2ap020a00f.
210
211config IQS621_ALS
212	tristate "Azoteq IQS621/622 ambient light sensors"
213	depends on MFD_IQS62X || COMPILE_TEST
214	help
215	  Say Y here if you want to build support for the Azoteq IQS621
216	  and IQS622 ambient light sensors.
217
218	  To compile this driver as a module, choose M here: the module
219	  will be called iqs621-als.
220
221config SENSORS_ISL29018
222	tristate "Intersil 29018 light and proximity sensor"
223	depends on I2C
224	select REGMAP_I2C
225	default n
226	help
227	  If you say yes here you get support for ambient light sensing and
228	  proximity infrared sensing from Intersil ISL29018.
229	  This driver will provide the measurements of ambient light intensity
230	  in lux, proximity infrared sensing and normal infrared sensing.
231	  Data from sensor is accessible via sysfs.
232
233config SENSORS_ISL29028
234	tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
235	depends on I2C
236	select REGMAP_I2C
237	help
238	  Provides driver for the Intersil's ISL29028 device.
239	  This driver supports the sysfs interface to get the ALS, IR intensity,
240	  Proximity value via iio. The ISL29028 provides the concurrent sensing
241	  of ambient light and proximity.
242
243config ISL29125
244	tristate "Intersil ISL29125 digital color light sensor"
245	depends on I2C
246	select IIO_BUFFER
247	select IIO_TRIGGERED_BUFFER
248	help
249	  Say Y here if you want to build a driver for the Intersil ISL29125
250	  RGB light sensor for I2C.
251
252	  To compile this driver as a module, choose M here: the module will be
253	  called isl29125.
254
255config HID_SENSOR_ALS
256	depends on HID_SENSOR_HUB
257	select IIO_BUFFER
258	select HID_SENSOR_IIO_COMMON
259	select HID_SENSOR_IIO_TRIGGER
260	tristate "HID ALS"
261	help
262	  Say yes here to build support for the HID SENSOR
263	  Ambient light sensor.
264
265	  To compile this driver as a module, choose M here: the
266	  module will be called hid-sensor-als.
267
268config HID_SENSOR_PROX
269	depends on HID_SENSOR_HUB
270	select IIO_BUFFER
271	select HID_SENSOR_IIO_COMMON
272	select HID_SENSOR_IIO_TRIGGER
273	tristate "HID PROX"
274	help
275	  Say yes here to build support for the HID SENSOR
276	  Proximity sensor.
277
278	  To compile this driver as a module, choose M here: the
279	  module will be called hid-sensor-prox.
280
281config JSA1212
282	tristate "JSA1212 ALS and proximity sensor driver"
283	depends on I2C
284	select REGMAP_I2C
285	help
286	  Say Y here if you want to build a IIO driver for JSA1212
287	  proximity & ALS sensor device.
288
289	  To compile this driver as a module, choose M here:
290	  the module will be called jsa1212.
291
292config RPR0521
293	tristate "ROHM RPR0521 ALS and proximity sensor driver"
294	depends on I2C
295	select REGMAP_I2C
296	select IIO_BUFFER
297	select IIO_TRIGGERED_BUFFER
298	help
299	  Say Y here if you want to build support for ROHM's RPR0521
300	  ambient light and proximity sensor device.
301
302	  To compile this driver as a module, choose M here:
303	  the module will be called rpr0521.
304
305config SENSORS_LM3533
306	tristate "LM3533 ambient light sensor"
307	depends on MFD_LM3533
308	help
309	  If you say yes here you get support for the ambient light sensor
310	  interface on National Semiconductor / TI LM3533 Lighting Power
311	  chips.
312
313	  The sensor interface can be used to control the LEDs and backlights
314	  of the chip through defining five light zones and three sets of
315	  corresponding output-current values.
316
317	  The driver provides raw and mean adc readings along with the current
318	  light zone through sysfs. A threshold event can be generated on zone
319	  changes. The ALS-control output values can be set per zone for the
320	  three current output channels.
321
322config LTR501
323	tristate "LTR-501ALS-01 light sensor"
324	depends on I2C
325	select REGMAP_I2C
326	select IIO_BUFFER
327	select IIO_TRIGGERED_BUFFER
328	help
329	  If you say yes here you get support for the Lite-On LTR-501ALS-01
330	  ambient light and proximity sensor. This driver also supports LTR-559
331	  ALS/PS or LTR-301 ALS sensors.
332
333	  This driver can also be built as a module.  If so, the module
334	  will be called ltr501.
335
336config LTRF216A
337	tristate "Liteon LTRF216A Light Sensor"
338	depends on I2C
339	select REGMAP_I2C
340	help
341	  If you say Y or M here, you get support for Liteon LTRF216A
342	  Ambient Light Sensor.
343
344	  If built as a dynamically linked module, it will be called
345	  ltrf216a.
346
347config LV0104CS
348	tristate "LV0104CS Ambient Light Sensor"
349	depends on I2C
350	help
351	  Say Y here if you want to build support for the On Semiconductor
352	  LV0104CS ambient light sensor.
353
354	  To compile this driver as a module, choose M here:
355	  the module will be called lv0104cs.
356
357config MAX44000
358	tristate "MAX44000 Ambient and Infrared Proximity Sensor"
359	depends on I2C
360	select REGMAP_I2C
361	select IIO_BUFFER
362	select IIO_TRIGGERED_BUFFER
363	help
364	  Say Y here if you want to build support for Maxim Integrated's
365	  MAX44000 ambient and infrared proximity sensor device.
366
367	  To compile this driver as a module, choose M here:
368	  the module will be called max44000.
369
370config MAX44009
371	tristate "MAX44009 Ambient Light Sensor"
372	depends on I2C
373	select REGMAP_I2C
374	help
375	 Say Y here if you want to build support for Maxim Integrated's
376	 MAX44009 ambient light sensor device.
377
378	 To compile this driver as a module, choose M here:
379	 the module will be called max44009.
380
381config NOA1305
382	tristate "ON Semiconductor NOA1305 ambient light sensor"
383	depends on I2C
384	select REGMAP_I2C
385	help
386	 Say Y here if you want to build support for the ON Semiconductor
387	 NOA1305 ambient light sensor.
388
389	 To compile this driver as a module, choose M here:
390	 The module will be called noa1305.
391
392config OPT3001
393	tristate "Texas Instruments OPT3001 Light Sensor"
394	depends on I2C
395	help
396	  If you say Y or M here, you get support for Texas Instruments
397	  OPT3001 Ambient Light Sensor.
398
399	  If built as a dynamically linked module, it will be called
400	  opt3001.
401
402config PA12203001
403	tristate "TXC PA12203001 light and proximity sensor"
404	depends on I2C
405	select REGMAP_I2C
406	help
407	  If you say yes here you get support for the TXC PA12203001
408	  ambient light and proximity sensor.
409
410	  This driver can also be built as a module.  If so, the module
411	  will be called pa12203001.
412
413config SI1133
414	tristate "SI1133 UV Index Sensor and Ambient Light Sensor"
415	depends on I2C
416	select REGMAP_I2C
417	  help
418	  Say Y here if you want to build a driver for the Silicon Labs SI1133
419	  UV Index Sensor and Ambient Light Sensor chip.
420
421	  To compile this driver as a module, choose M here: the module will be
422	  called si1133.
423
424config SI1145
425	tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor"
426	depends on I2C
427	select IIO_BUFFER
428	select IIO_TRIGGERED_BUFFER
429	help
430	  Say Y here if you want to build a driver for the Silicon Labs SI1132 or
431	  SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor
432	  chips.
433
434	  To compile this driver as a module, choose M here: the module will be
435	  called si1145.
436
437config STK3310
438	tristate "STK3310 ALS and proximity sensor"
439	depends on I2C
440	select REGMAP_I2C
441	help
442	  Say yes here to get support for the Sensortek STK3310 ambient light
443	  and proximity sensor. The STK3311 model is also supported by this
444	  driver.
445
446	  Choosing M will build the driver as a module. If so, the module
447	  will be called stk3310.
448
449config ST_UVIS25
450	tristate "STMicroelectronics UVIS25 sensor driver"
451	depends on (I2C || SPI)
452	select IIO_BUFFER
453	select IIO_TRIGGERED_BUFFER
454	select ST_UVIS25_I2C if (I2C)
455	select ST_UVIS25_SPI if (SPI_MASTER)
456	help
457	  Say yes here to build support for STMicroelectronics UVIS25
458	  uv sensor
459
460	  To compile this driver as a module, choose M here: the module
461	  will be called st_uvis25.
462
463config ST_UVIS25_I2C
464	tristate
465	depends on ST_UVIS25
466	select REGMAP_I2C
467
468config ST_UVIS25_SPI
469	tristate
470	depends on ST_UVIS25
471	select REGMAP_SPI
472
473config TCS3414
474	tristate "TAOS TCS3414 digital color sensor"
475	depends on I2C
476	select IIO_BUFFER
477	select IIO_TRIGGERED_BUFFER
478	help
479	  If you say yes here you get support for the TAOS TCS3414
480	  family of digital color sensors.
481
482	  This driver can also be built as a module.  If so, the module
483	  will be called tcs3414.
484
485config TCS3472
486	tristate "TAOS TCS3472 color light-to-digital converter"
487	depends on I2C
488	select IIO_BUFFER
489	select IIO_TRIGGERED_BUFFER
490	help
491	  If you say yes here you get support for the TAOS TCS3472
492	  family of color light-to-digital converters with IR filter.
493
494	  This driver can also be built as a module.  If so, the module
495	  will be called tcs3472.
496
497config SENSORS_TSL2563
498	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
499	depends on I2C
500	help
501	  If you say yes here you get support for the Taos TSL2560,
502	  TSL2561, TSL2562 and TSL2563 ambient light sensors.
503
504	  This driver can also be built as a module.  If so, the module
505	  will be called tsl2563.
506
507config TSL2583
508	tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
509	depends on I2C
510	help
511	  Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
512	  Access ALS data via iio, sysfs.
513
514config TSL2591
515        tristate "TAOS TSL2591 ambient light sensor"
516        depends on I2C
517        help
518          Select Y here for support of the AMS/TAOS TSL2591 ambient light sensor,
519          featuring channels for combined visible + IR intensity and lux illuminance.
520          Access data via iio and sysfs. Supports iio_events.
521
522          To compile this driver as a module, select M: the
523          module will be called tsl2591.
524
525config TSL2772
526	tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
527	depends on I2C
528	help
529	  Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
530	  tmd2672, tsl2772, tmd2772 devices.
531	  Provides iio_events and direct access via sysfs.
532
533config TSL4531
534	tristate "TAOS TSL4531 ambient light sensors"
535	depends on I2C
536	help
537	  Say Y here if you want to build a driver for the TAOS TSL4531 family
538	  of ambient light sensors with direct lux output.
539
540	  To compile this driver as a module, choose M here: the
541	  module will be called tsl4531.
542
543config US5182D
544	tristate "UPISEMI light and proximity sensor"
545	depends on I2C
546	help
547	  If you say yes here you get support for the UPISEMI US5182D
548	  ambient light and proximity sensor.
549
550	  This driver can also be built as a module.  If so, the module
551	  will be called us5182d.
552
553config VCNL4000
554	tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor"
555	select IIO_BUFFER
556	select IIO_TRIGGERED_BUFFER
557	depends on I2C
558	help
559	  Say Y here if you want to build a driver for the Vishay VCNL4000,
560	  VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity
561	  sensor.
562
563	  To compile this driver as a module, choose M here: the
564	  module will be called vcnl4000.
565
566config VCNL4035
567	tristate "VCNL4035 combined ALS and proximity sensor"
568	select IIO_BUFFER
569	select IIO_TRIGGERED_BUFFER
570	select REGMAP_I2C
571	depends on I2C
572	help
573	  Say Y here if you want to build a driver for the Vishay VCNL4035,
574	  combined ambient light (ALS) and proximity sensor. Currently only ALS
575	  function is available.
576
577	  To compile this driver as a module, choose M here: the
578	  module will be called vcnl4035.
579
580config VEML6030
581	tristate "VEML6030 ambient light sensor"
582	select REGMAP_I2C
583	depends on I2C
584	help
585	  Say Y here if you want to build a driver for the Vishay VEML6030
586	  ambient light sensor (ALS).
587
588	  To compile this driver as a module, choose M here: the
589	  module will be called veml6030.
590
591config VEML6070
592	tristate "VEML6070 UV A light sensor"
593	depends on I2C
594	help
595	  Say Y here if you want to build a driver for the Vishay VEML6070 UV A
596	  light sensor.
597
598	  To compile this driver as a module, choose M here: the
599	  module will be called veml6070.
600
601config VL6180
602	tristate "VL6180 ALS, range and proximity sensor"
603	depends on I2C
604	help
605	  Say Y here if you want to build a driver for the STMicroelectronics
606	  VL6180 combined ambient light, range and proximity sensor.
607
608	  To compile this driver as a module, choose M here: the
609	  module will be called vl6180.
610
611config ZOPT2201
612	tristate "ZOPT2201 ALS and UV B sensor"
613	depends on I2C
614	help
615	  Say Y here if you want to build a driver for the IDT
616	  ZOPT2201 ambient light and UV B sensor.
617
618	  To compile this driver as a module, choose M here: the
619	  module will be called zopt2201.
620
621endmenu
622