1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig REGULATOR
3	bool "Voltage and Current Regulator Support"
4	select LINEAR_RANGES
5	help
6	  Generic Voltage and Current Regulator support.
7
8	  This framework is designed to provide a generic interface to voltage
9	  and current regulators within the Linux kernel. It's intended to
10	  provide voltage and current control to client or consumer drivers and
11	  also provide status information to user space applications through a
12	  sysfs interface.
13
14	  The intention is to allow systems to dynamically control regulator
15	  output in order to save power and prolong battery life. This applies
16	  to both voltage regulators (where voltage output is controllable) and
17	  current sinks (where current output is controllable).
18
19	  This framework safely compiles out if not selected so that client
20	  drivers can still be used in systems with no software controllable
21	  regulators.
22
23	  If unsure, say no.
24
25
26if REGULATOR
27
28config REGULATOR_DEBUG
29	bool "Regulator debug support"
30	help
31	  Say yes here to enable debugging support.
32
33config REGULATOR_FIXED_VOLTAGE
34	tristate "Fixed voltage regulator support"
35	help
36	  This driver provides support for fixed voltage regulators,
37	  useful for systems which use a combination of software
38	  managed regulators and simple non-configurable regulators.
39
40config REGULATOR_VIRTUAL_CONSUMER
41	tristate "Virtual regulator consumer support"
42	help
43	  This driver provides a virtual consumer for the voltage and
44	  current regulator API which provides sysfs controls for
45	  configuring the supplies requested.  This is mainly useful
46	  for test purposes.
47
48	  If unsure, say no.
49
50config REGULATOR_USERSPACE_CONSUMER
51	tristate "Userspace regulator consumer support"
52	help
53	  There are some classes of devices that are controlled entirely
54	  from user space. Userspace consumer driver provides ability to
55	  control power supplies for such devices.
56
57	  If unsure, say no.
58
59config REGULATOR_88PG86X
60	tristate "Marvell 88PG86X voltage regulators"
61	depends on I2C
62	select REGMAP_I2C
63	help
64	  This driver supports Marvell 88PG867 and 88PG868 voltage regulators.
65	  They provide two I2C-controlled DC/DC step-down converters with
66	  sleep mode and separate enable pins.
67
68config REGULATOR_88PM800
69	tristate "Marvell 88PM800 Power regulators"
70	depends on MFD_88PM800
71	help
72	  This driver supports Marvell 88PM800 voltage regulator chips.
73	  It delivers digitally programmable output,
74	  the voltage is programmed via I2C interface.
75	  It's suitable to support PXA988 chips to control VCC_MAIN and
76	  various voltages.
77
78config REGULATOR_88PM8607
79	tristate "Marvell 88PM8607 Power regulators"
80	depends on MFD_88PM860X=y
81	help
82	  This driver supports 88PM8607 voltage regulator chips.
83
84config REGULATOR_ACT8865
85	tristate "Active-semi act8865 voltage regulator"
86	depends on I2C
87	depends on POWER_SUPPLY
88	select REGMAP_I2C
89	help
90	  This driver controls a active-semi act8865 voltage output
91	  regulator via I2C bus.
92
93config REGULATOR_ACT8945A
94	tristate "Active-semi ACT8945A voltage regulator"
95	depends on MFD_ACT8945A
96	help
97	  This driver controls a active-semi ACT8945A voltage regulator
98	  via I2C bus. The ACT8945A features three step-down DC/DC converters
99	  and four low-dropout linear regulators, along with a ActivePath
100	  battery charger.
101
102config REGULATOR_AD5398
103	tristate "Analog Devices AD5398/AD5821 regulators"
104	depends on I2C
105	help
106	  This driver supports AD5398 and AD5821 current regulator chips.
107	  If building into module, its name is ad5398.ko.
108
109config REGULATOR_ANATOP
110	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
111	depends on ARCH_MXC || COMPILE_TEST
112	depends on MFD_SYSCON
113	help
114	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
115	  regulators. It is recommended that this option be
116	  enabled on i.MX6 platform.
117
118config REGULATOR_AAT2870
119	tristate "AnalogicTech AAT2870 Regulators"
120	depends on MFD_AAT2870_CORE
121	help
122	  If you have a AnalogicTech AAT2870 say Y to enable the
123	  regulator driver.
124
125config REGULATOR_AB8500
126	bool "ST-Ericsson AB8500 Power Regulators"
127	depends on AB8500_CORE
128	help
129	  This driver supports the regulators found on the ST-Ericsson mixed
130	  signal AB8500 PMIC
131
132config REGULATOR_ARIZONA_LDO1
133	tristate "Cirrus Madera and Wolfson Arizona class devices LDO1"
134	depends on MFD_ARIZONA || MFD_MADERA
135	depends on SND_SOC
136	help
137	  Support for the LDO1 regulators found on Cirrus Logic Madera codecs
138	  and Wolfson Microelectronic Arizona codecs.
139
140config REGULATOR_ARIZONA_MICSUPP
141	tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP"
142	depends on MFD_ARIZONA || MFD_MADERA
143	depends on SND_SOC
144	help
145	  Support for the MICSUPP regulators found on Cirrus Logic Madera codecs
146	  and Wolfson Microelectronic Arizona codecs
147	  devices.
148
149config REGULATOR_ARM_SCMI
150	tristate "SCMI based regulator driver"
151	depends on ARM_SCMI_PROTOCOL && OF
152	help
153	  This adds the regulator driver support for ARM platforms using SCMI
154	  protocol for device voltage management.
155	  This driver uses SCMI Message Protocol driver to interact with the
156	  firmware providing the device Voltage functionality.
157
158config REGULATOR_AS3711
159	tristate "AS3711 PMIC"
160	depends on MFD_AS3711
161	help
162	  This driver provides support for the voltage regulators on the
163	  AS3711 PMIC
164
165config REGULATOR_AS3722
166	tristate "AMS AS3722 PMIC Regulators"
167	depends on MFD_AS3722
168	help
169	  This driver provides support for the voltage regulators on the
170	  AS3722 PMIC. This will enable support for all the software
171	  controllable DCDC/LDO regulators.
172
173config REGULATOR_ATC260X
174	tristate "Actions Semi ATC260x PMIC Regulators"
175	depends on MFD_ATC260X
176	help
177	  This driver provides support for the voltage regulators on the
178	  ATC260x PMICs. This will enable support for all the software
179	  controllable DCDC/LDO regulators.
180
181config REGULATOR_AXP20X
182	tristate "X-POWERS AXP20X PMIC Regulators"
183	depends on MFD_AXP20X
184	help
185	  This driver provides support for the voltage regulators on the
186	  AXP20X PMIC.
187
188config REGULATOR_BCM590XX
189	tristate "Broadcom BCM590xx PMU Regulators"
190	depends on MFD_BCM590XX
191	help
192	  This driver provides support for the voltage regulators on the
193	  BCM590xx PMUs. This will enable support for the software
194	  controllable LDO/Switching regulators.
195
196config REGULATOR_BD71815
197	tristate "ROHM BD71815 Power Regulator"
198	depends on MFD_ROHM_BD71828
199	select REGULATOR_ROHM
200	help
201	  This driver supports voltage regulators on ROHM BD71815 PMIC.
202	  This will enable support for the software controllable buck
203	  and LDO regulators and a current regulator for LEDs.
204
205	  This driver can also be built as a module. If so, the module
206	  will be called bd71815-regulator.
207
208config REGULATOR_BD71828
209	tristate "ROHM BD71828 Power Regulator"
210	depends on MFD_ROHM_BD71828
211	select REGULATOR_ROHM
212	help
213	  This driver supports voltage regulators on ROHM BD71828 PMIC.
214	  This will enable support for the software controllable buck
215	  and LDO regulators.
216
217	  This driver can also be built as a module. If so, the module
218	  will be called bd71828-regulator.
219
220config REGULATOR_BD718XX
221	tristate "ROHM BD71837 Power Regulator"
222	depends on MFD_ROHM_BD718XX
223	select REGULATOR_ROHM
224	help
225	  This driver supports voltage regulators on ROHM BD71837 PMIC.
226	  This will enable support for the software controllable buck
227	  and LDO regulators.
228
229	  This driver can also be built as a module. If so, the module
230	  will be called bd718x7-regulator.
231
232config REGULATOR_BD9571MWV
233	tristate "ROHM BD9571MWV Regulators"
234	depends on MFD_BD9571MWV
235	help
236	  This driver provides support for the voltage regulators on the
237	  ROHM BD9571MWV PMIC. This will enable support for the software
238	  controllable regulator and voltage sampling units.
239
240	  This driver can also be built as a module. If so, the module
241	  will be called bd9571mwv-regulator.
242
243config REGULATOR_BD957XMUF
244	tristate "ROHM BD9576MUF and BD9573MUF Regulators"
245	depends on MFD_ROHM_BD957XMUF
246	help
247	  This driver supports voltage regulators on ROHM BD9576MUF and
248	  BD9573MUF PMICs.
249
250	  This driver can also be built as a module. If so, the module
251	  will be called bd9576-regulator.
252
253config REGULATOR_CPCAP
254	tristate "Motorola CPCAP regulator"
255	depends on MFD_CPCAP
256	help
257	  Say y here for CPCAP regulator found on some Motorola phones
258	  and tablets such as Droid 4.
259
260config REGULATOR_CROS_EC
261	tristate "ChromeOS EC regulators"
262	depends on CROS_EC && OF
263	help
264	  This driver supports voltage regulators that is connected to ChromeOS
265	  EC and controlled through EC host commands.
266
267	  This driver can also be built as a module. If so, the module
268	  will be called cros-ec-regulator.
269
270config REGULATOR_DA903X
271	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
272	depends on PMIC_DA903X
273	depends on !CC_IS_CLANG # https://bugs.llvm.org/show_bug.cgi?id=38789
274	help
275	  Say y here to support the BUCKs and LDOs regulators found on
276	  Dialog Semiconductor DA9030/DA9034 PMIC.
277
278config REGULATOR_DA9052
279	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
280	depends on PMIC_DA9052
281	help
282	  This driver supports the voltage regulators of DA9052-BC and
283	  DA9053-AA/Bx PMIC.
284
285config REGULATOR_DA9055
286	tristate "Dialog Semiconductor DA9055 regulators"
287	depends on MFD_DA9055
288	help
289	  Say y here to support the BUCKs and LDOs regulators found on
290	  Dialog Semiconductor DA9055 PMIC.
291
292	  This driver can also be built as a module. If so, the module
293	  will be called da9055-regulator.
294
295config REGULATOR_DA9062
296	tristate "Dialog Semiconductor DA9061/62 regulators"
297	depends on MFD_DA9062
298	help
299	  Say y here to support the BUCKs and LDOs regulators found on
300	  DA9061 and DA9062 PMICs.
301
302	  This driver can also be built as a module. If so, the module
303	  will be called da9062-regulator.
304
305config REGULATOR_DA9063
306	tristate "Dialog Semiconductor DA9063 regulators"
307	depends on MFD_DA9063 && OF
308	help
309	  Say y here to support the BUCKs and LDOs regulators found on
310	  DA9063 PMICs.
311
312	  This driver can also be built as a module. If so, the module
313	  will be called da9063-regulator.
314
315config REGULATOR_DA9121
316	tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator"
317	depends on I2C && OF
318	select REGMAP_I2C
319	help
320	  Say y here to support for the Dialog Semiconductor DA9121.  The
321	  DA9121 is a single channel dual-phase buck converter controlled
322	  through an I2C interface.
323
324	  DA9121 Single-channel dual-phase 10A buck converter
325	  DA9130 Single-channel dual-phase 10A buck converter (Automotive)
326	  DA9217 Single-channel dual-phase  6A buck converter
327	  DA9122 Dual-channel single-phase  5A buck converter
328	  DA9131 Dual-channel single-phase  5A buck converter (Automotive)
329	  DA9220 Dual-channel single-phase  3A buck converter
330	  DA9132 Dual-channel single-phase  3A buck converter (Automotive)
331
332	  This driver can also be built as a module. If so, the module
333	  will be called da9121-regulator.
334
335config REGULATOR_DA9210
336	tristate "Dialog Semiconductor DA9210 regulator"
337	depends on I2C
338	select REGMAP_I2C
339	help
340	  Say y here to support for the Dialog Semiconductor DA9210.
341	  The DA9210 is a multi-phase synchronous step down
342	  converter 12A DC-DC Buck controlled through an I2C
343	  interface.
344
345config REGULATOR_DA9211
346	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator"
347	depends on I2C
348	select REGMAP_I2C
349	help
350	  Say y here to support for the Dialog Semiconductor DA9211/DA9212
351	  /DA9213/DA9214/DA9215.
352	  The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
353	  step down converter 12A or 16A DC-DC Buck controlled through an I2C
354	  interface.
355
356config REGULATOR_DBX500_PRCMU
357	bool
358
359config REGULATOR_DB8500_PRCMU
360	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
361	depends on MFD_DB8500_PRCMU
362	select REGULATOR_DBX500_PRCMU
363	help
364	  This driver supports the voltage domain regulators controlled by the
365	  DB8500 PRCMU
366
367config REGULATOR_FAN53555
368	tristate "Fairchild FAN53555 Regulator"
369	depends on I2C
370	select REGMAP_I2C
371	help
372	  This driver supports Fairchild FAN53555 Digitally Programmable
373	  TinyBuck Regulator. The FAN53555 is a step-down switching voltage
374	  regulator that delivers a digitally programmable output from an
375	  input voltage supply of 2.5V to 5.5V. The output voltage is
376	  programmed through an I2C interface.
377
378config REGULATOR_FAN53880
379	tristate "Fairchild FAN53880 Regulator"
380	depends on I2C && (OF || COMPILE_TEST)
381	select REGMAP_I2C
382	help
383	  This driver supports Fairchild (ON Semiconductor) FAN53880
384	  regulator. The regulator is a programmable power management IC
385	  (PMIC), it is controlled by I2C and provides one BUCK, one BOOST
386	  and four LDO outputs.
387
388config REGULATOR_GPIO
389	tristate "GPIO regulator support"
390	depends on GPIOLIB || COMPILE_TEST
391	help
392	  This driver provides support for regulators that can be
393	  controlled via gpios.
394	  It is capable of supporting current and voltage regulators
395	  and the platform has to provide a mapping of GPIO-states
396	  to target volts/amps.
397
398config REGULATOR_HI6421
399	tristate "HiSilicon Hi6421 PMIC voltage regulator support"
400	depends on MFD_HI6421_PMIC && OF
401	help
402	  This driver provides support for the voltage regulators on the
403	  HiSilicon Hi6421 PMU / Codec IC.
404	  Hi6421 is a multi-function device which, on regulator part, provides
405	  21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
406	  of them come with support to either ECO (idle) or sleep mode.
407
408config REGULATOR_HI6421V530
409	tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
410	depends on MFD_HI6421_PMIC && OF
411	help
412	  This driver provides support for the voltage regulators on
413	  HiSilicon Hi6421v530 PMU / Codec IC.
414	  Hi6421v530 is a multi-function device which, on regulator part,
415	  provides 5 general purpose LDOs, and all of them come with support
416	  to either ECO (idle) or sleep mode.
417
418config REGULATOR_HI655X
419	tristate "Hisilicon HI655X PMIC regulators support"
420	depends on ARCH_HISI || COMPILE_TEST
421	depends on MFD_HI655X_PMIC && OF
422	help
423	  This driver provides support for the voltage regulators of the
424	  Hisilicon Hi655x PMIC device.
425
426config REGULATOR_HI6421V600
427	tristate "HiSilicon Hi6421v600 PMIC voltage regulator support"
428	depends on MFD_HI6421_SPMI && OF
429	select REGMAP
430	help
431	  This driver provides support for the voltage regulators on
432	  HiSilicon Hi6421v600 PMU / Codec IC.
433	  This is used on Kirin 3670 boards, like HiKey 970.
434
435config REGULATOR_ISL9305
436	tristate "Intersil ISL9305 regulator"
437	depends on I2C
438	select REGMAP_I2C
439	help
440	  This driver supports ISL9305 voltage regulator chip.
441
442config REGULATOR_ISL6271A
443	tristate "Intersil ISL6271A Power regulator"
444	depends on I2C
445	help
446	  This driver supports ISL6271A voltage regulator chip.
447
448config REGULATOR_LM363X
449	tristate "TI LM363X voltage regulators"
450	depends on MFD_TI_LMU
451	help
452	  This driver supports LM3631, LM3632 and LM36274 voltage regulators for
453	  the LCD bias.
454	  One boost output voltage is configurable and always on.
455	  Other LDOs are used for the display module.
456
457config REGULATOR_LOCHNAGAR
458	tristate "Cirrus Logic Lochnagar regulator driver"
459	depends on MFD_LOCHNAGAR
460	help
461	  This enables regulator support on the Cirrus Logic Lochnagar audio
462	  development board.
463
464config REGULATOR_LP3971
465	tristate "National Semiconductors LP3971 PMIC regulator driver"
466	depends on I2C
467	help
468	 Say Y here to support the voltage regulators and convertors
469	 on National Semiconductors LP3971 PMIC
470
471config REGULATOR_LP3972
472	tristate "National Semiconductors LP3972 PMIC regulator driver"
473	depends on I2C
474	help
475	 Say Y here to support the voltage regulators and convertors
476	 on National Semiconductors LP3972 PMIC
477
478config REGULATOR_LP872X
479	tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
480	depends on I2C
481	select REGMAP_I2C
482	help
483	  This driver supports LP8720/LP8725 PMIC
484
485config REGULATOR_LP873X
486	tristate "TI LP873X Power regulators"
487	depends on MFD_TI_LP873X && OF
488	help
489	  This driver supports LP873X voltage regulator chips. LP873X
490	  provides two step-down converters and two general-purpose LDO
491	  voltage regulators. It supports software based voltage control
492	  for different voltage domains
493
494config REGULATOR_LP8755
495	tristate "TI LP8755 High Performance PMU driver"
496	depends on I2C
497	select REGMAP_I2C
498	help
499	  This driver supports LP8755 High Performance PMU driver. This
500	  chip contains six step-down DC/DC converters which can support
501	  9 mode multiphase configuration.
502
503config REGULATOR_LP87565
504	tristate "TI LP87565 Power regulators"
505	depends on MFD_TI_LP87565 && OF
506	help
507	  This driver supports LP87565 voltage regulator chips. LP87565
508	  provides four step-down converters. It supports software based
509	  voltage control for different voltage domains
510
511config REGULATOR_LP8788
512	tristate "TI LP8788 Power Regulators"
513	depends on MFD_LP8788
514	help
515	  This driver supports LP8788 voltage regulator chip.
516
517config REGULATOR_LTC3589
518	tristate "LTC3589 8-output voltage regulator"
519	depends on I2C
520	select REGMAP_I2C
521	help
522	  This enables support for the LTC3589, LTC3589-1, and LTC3589-2
523	  8-output regulators controlled via I2C.
524
525config REGULATOR_LTC3676
526	tristate "LTC3676 8-output voltage regulator"
527	depends on I2C
528	select REGMAP_I2C
529	help
530	  This enables support for the LTC3676
531	  8-output regulators controlled via I2C.
532
533config REGULATOR_MAX14577
534	tristate "Maxim 14577/77836 regulator"
535	depends on MFD_MAX14577
536	help
537	  This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
538	  The MAX14577 regulators include safeout LDO and charger current
539	  regulator. The MAX77836 has two additional LDOs.
540
541config REGULATOR_MAX1586
542	tristate "Maxim 1586/1587 voltage regulator"
543	depends on I2C
544	help
545	  This driver controls a Maxim 1586 or 1587 voltage output
546	  regulator via I2C bus. The provided regulator is suitable
547	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
548
549config REGULATOR_MAX77620
550	tristate "Maxim 77620/MAX20024 voltage regulator"
551	depends on MFD_MAX77620 || COMPILE_TEST
552	help
553	  This driver controls Maxim MAX77620 voltage output regulator
554	  via I2C bus. The provided regulator is suitable for Tegra
555	  chip to control Step-Down DC-DC and LDOs. Say Y here to
556	  enable the regulator driver.
557
558config REGULATOR_MAX77650
559	tristate "Maxim MAX77650/77651 regulator support"
560	depends on MFD_MAX77650 || COMPILE_TEST
561	help
562	  Regulator driver for MAX77650/77651 PMIC from Maxim
563	  Semiconductor. This device has a SIMO with three independent
564	  power rails and an LDO.
565
566config REGULATOR_MAX8649
567	tristate "Maxim 8649 voltage regulator"
568	depends on I2C
569	select REGMAP_I2C
570	help
571	  This driver controls a Maxim 8649 voltage output regulator via
572	  I2C bus.
573
574config REGULATOR_MAX8660
575	tristate "Maxim 8660/8661 voltage regulator"
576	depends on I2C
577	help
578	  This driver controls a Maxim 8660/8661 voltage output
579	  regulator via I2C bus.
580
581config REGULATOR_MAX8893
582	tristate "Maxim 8893 voltage regulator"
583	depends on I2C
584	select REGMAP_I2C
585	help
586	  This driver controls a Maxim 8893 voltage output
587	  regulator via I2C bus.
588
589config REGULATOR_MAX8907
590	tristate "Maxim 8907 voltage regulator"
591	depends on MFD_MAX8907 || COMPILE_TEST
592	help
593	  This driver controls a Maxim 8907 voltage output regulator
594	  via I2C bus. The provided regulator is suitable for Tegra
595	  chip to control Step-Down DC-DC and LDOs.
596
597config REGULATOR_MAX8925
598	tristate "Maxim MAX8925 Power Management IC"
599	depends on MFD_MAX8925
600	help
601	  Say y here to support the voltage regulator of Maxim MAX8925 PMIC.
602
603config REGULATOR_MAX8952
604	tristate "Maxim MAX8952 Power Management IC"
605	depends on I2C
606	help
607	  This driver controls a Maxim 8952 voltage output regulator
608	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
609	  modes ranging from 0.77V to 1.40V by 0.01V steps.
610
611config REGULATOR_MAX8973
612	tristate "Maxim MAX8973A voltage regulator"
613	depends on I2C
614	depends on THERMAL && THERMAL_OF
615	select REGMAP_I2C
616	help
617	  The MAXIM MAX8973A high-efficiency. three phase, DC-DC step-down
618	  switching regulator delivers up to 9A of output current. Each
619	  phase operates at a 2MHz fixed frequency with a 120 deg shift
620	  from the adjacent phase, allowing the use of small magnetic component.
621
622config REGULATOR_MAX8997
623	tristate "Maxim 8997/8966 regulator"
624	depends on MFD_MAX8997
625	help
626	  This driver controls a Maxim 8997/8966 regulator
627	  via I2C bus. The provided regulator is suitable for S5PC110,
628	  S5PV210, and Exynos-4 chips to control VCC_CORE and
629	  VCC_USIM voltages.
630
631config REGULATOR_MAX8998
632	tristate "Maxim 8998 voltage regulator"
633	depends on MFD_MAX8998
634	help
635	  This driver controls a Maxim 8998 voltage output regulator
636	  via I2C bus. The provided regulator is suitable for S3C6410
637	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
638
639config REGULATOR_MAX20086
640	tristate "Maxim MAX20086-MAX20089 Camera Power Protectors"
641	depends on I2C
642	select REGMAP_I2C
643	help
644	  This driver controls a Maxim MAX20086-MAX20089 camera power
645	  protectorvia I2C bus. The regulator has 2 or 4 outputs depending on
646	  the device model. This driver is only capable to turn on/off them.
647
648config REGULATOR_MAX77686
649	tristate "Maxim 77686 regulator"
650	depends on MFD_MAX77686 || COMPILE_TEST
651	help
652	  This driver controls a Maxim 77686 regulator
653	  via I2C bus. The provided regulator is suitable for
654	  Exynos-4 chips to control VARM and VINT voltages.
655
656config REGULATOR_MAX77693
657	tristate "Maxim 77693/77843 regulator"
658	depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST
659	help
660	  This driver controls a Maxim 77693/77843 regulators via I2C bus.
661	  The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
662	  and one current regulator 'CHARGER'. This is suitable for
663	  Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
664
665config REGULATOR_MAX77802
666	tristate "Maxim 77802 regulator"
667	depends on MFD_MAX77686 || COMPILE_TEST
668	help
669	  This driver controls a Maxim 77802 regulator
670	  via I2C bus. The provided regulator is suitable for
671	  Exynos5420/Exynos5800 SoCs to control various voltages.
672	  It includes support for control of voltage and ramp speed.
673
674config REGULATOR_MAX77826
675	tristate "Maxim 77826 regulator"
676	depends on I2C
677	select REGMAP_I2C
678	help
679	  This driver controls a Maxim 77826 regulator via I2C bus.
680	  The regulator include 15 LDOs, BUCK and BUCK BOOST regulator.
681	  It includes support for control of output voltage. This
682	  regulator is found on the Samsung Galaxy S5 (klte) smartphone.
683
684config REGULATOR_MC13XXX_CORE
685	tristate
686
687config REGULATOR_MC13783
688	tristate "Freescale MC13783 regulator driver"
689	depends on MFD_MC13XXX
690	select REGULATOR_MC13XXX_CORE
691	help
692	  Say y here to support the regulators found on the Freescale MC13783
693	  PMIC.
694
695config REGULATOR_MC13892
696	tristate "Freescale MC13892 regulator driver"
697	depends on MFD_MC13XXX
698	select REGULATOR_MC13XXX_CORE
699	help
700	  Say y here to support the regulators found on the Freescale MC13892
701	  PMIC.
702
703config REGULATOR_MCP16502
704	tristate "Microchip MCP16502 PMIC"
705	depends on I2C && OF
706	select REGMAP_I2C
707	help
708	  Say y here to support the MCP16502 PMIC. This driver supports
709	  basic operations (get/set voltage, get/set operating mode)
710	  through the regulator interface. In addition it enables
711	  suspend-to-ram/standby transition.
712
713config REGULATOR_MP5416
714	tristate "Monolithic MP5416 PMIC"
715	depends on I2C && OF
716	select REGMAP_I2C
717	help
718	  Say y here to support the MP5416 PMIC. This will enable supports
719	  the software controllable 4 buck and 4 LDO regulators.
720	  Say M here if you want to include support for the regulator as a
721	  module.
722
723config REGULATOR_MP8859
724	tristate "MPS MP8859 regulator driver"
725	depends on I2C
726	select REGMAP_I2C
727	help
728	  Say y here to support the MP8859 voltage regulator. This driver
729	  supports basic operations (get/set voltage) through the regulator
730	  interface.
731	  Say M here if you want to include support for the regulator as a
732	  module. The module will be named "mp8859".
733
734config REGULATOR_MP886X
735	tristate "MPS MP8869 regulator driver"
736	depends on I2C && (OF || COMPILE_TEST)
737	select REGMAP_I2C
738	help
739	  This driver supports the MP8869 voltage regulator.
740
741config REGULATOR_MPQ7920
742	tristate "Monolithic MPQ7920 PMIC"
743	depends on I2C && OF
744	select REGMAP_I2C
745	help
746	  Say y here to support the MPQ7920 PMIC. This will enable supports
747	  the software controllable 4 buck and 5 LDO regulators.
748	  This driver supports the control of different power rails of device
749	  through regulator interface.
750
751config REGULATOR_MT6311
752	tristate "MediaTek MT6311 PMIC"
753	depends on I2C
754	select REGMAP_I2C
755	help
756	  Say y here to select this option to enable the power regulator of
757	  MediaTek MT6311 PMIC.
758	  This driver supports the control of different power rails of device
759	  through regulator interface.
760
761config REGULATOR_MT6315
762	tristate "MediaTek MT6315 PMIC"
763	depends on SPMI
764	select REGMAP_SPMI
765	help
766	  Say y here to select this option to enable the power regulator of
767	  MediaTek MT6315 PMIC.
768	  This driver supports the control of different power rails of device
769	  through regulator interface.
770
771config REGULATOR_MT6323
772	tristate "MediaTek MT6323 PMIC"
773	depends on MFD_MT6397
774	help
775	  Say y here to select this option to enable the power regulator of
776	  MediaTek MT6323 PMIC.
777	  This driver supports the control of different power rails of device
778	  through regulator interface.
779
780config REGULATOR_MT6358
781	tristate "MediaTek MT6358 PMIC"
782	depends on MFD_MT6397
783	help
784	  Say y here to select this option to enable the power regulator of
785	  MediaTek MT6358 PMIC.
786	  This driver supports the control of different power rails of device
787	  through regulator interface.
788
789config REGULATOR_MT6359
790	tristate "MediaTek MT6359 PMIC"
791	depends on MFD_MT6397
792	help
793	  Say y here to select this option to enable the power regulator of
794	  MediaTek MT6359 PMIC.
795	  This driver supports the control of different power rails of device
796	  through regulator interface.
797
798config REGULATOR_MT6360
799	tristate "MT6360 SubPMIC Regulator"
800	depends on MFD_MT6360
801	help
802	  Say Y here to enable MT6360 regulator support.
803	  This is support MT6360 PMIC/LDO part include
804	  2-channel buck with Thermal Shutdown and Overload Protection
805	  6-channel High PSRR and Low Dropout LDO.
806
807config REGULATOR_MT6380
808	tristate "MediaTek MT6380 PMIC"
809	depends on MTK_PMIC_WRAP
810	help
811	  Say y here to select this option to enable the power regulator of
812	  MediaTek MT6380 PMIC.
813	  This driver supports the control of different power rails of device
814	  through regulator interface.
815
816config REGULATOR_MT6397
817	tristate "MediaTek MT6397 PMIC"
818	depends on MFD_MT6397
819	help
820	  Say y here to select this option to enable the power regulator of
821	  MediaTek MT6397 PMIC.
822	  This driver supports the control of different power rails of device
823	  through regulator interface.
824
825config REGULATOR_MTK_DVFSRC
826	tristate "MediaTek DVFSRC regulator driver"
827	depends on MTK_DVFSRC
828	help
829	  Say y here to control regulator by DVFSRC (dynamic voltage
830	  and frequency scaling resource collector).
831	  This driver supports to control regulators via the DVFSRC
832	  of Mediatek. It allows for voting on regulator state
833	  between multiple users.
834
835config REGULATOR_PALMAS
836	tristate "TI Palmas PMIC Regulators"
837	depends on MFD_PALMAS
838	help
839	  If you wish to control the regulators on the Palmas series of
840	  chips say Y here. This will enable support for all the software
841	  controllable SMPS/LDO regulators.
842
843	  The regulators available on Palmas series chips vary depending
844	  on the muxing. This is handled automatically in the driver by
845	  reading the mux info from OTP.
846
847config REGULATOR_PBIAS
848	tristate "PBIAS OMAP regulator driver"
849	depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
850	help
851	 Say y here to support pbias regulator for mmc1:SD card i/o
852	 on OMAP SoCs.
853	 This driver provides support for OMAP pbias modelled
854	 regulators.
855
856config REGULATOR_PCA9450
857	tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver"
858	depends on I2C
859	select REGMAP_I2C
860	help
861	  Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC
862	  regulator driver.
863
864config REGULATOR_PCAP
865	tristate "Motorola PCAP2 regulator driver"
866	depends on EZX_PCAP
867	help
868	 This driver provides support for the voltage regulators of the
869	 PCAP2 PMIC.
870
871config REGULATOR_PCF50633
872	tristate "NXP PCF50633 regulator driver"
873	depends on MFD_PCF50633
874	help
875	 Say Y here to support the voltage regulators and converters
876	 on PCF50633
877
878config REGULATOR_PF8X00
879	tristate "NXP PF8100/PF8121A/PF8200 regulator driver"
880	depends on I2C && OF
881	select REGMAP_I2C
882	help
883	  Say y here to support the regulators found on the NXP
884	  PF8100/PF8121A/PF8200 PMIC.
885
886	  Say M here if you want to support for the regulators found
887	  on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named
888	  "pf8x00-regulator".
889
890config REGULATOR_PFUZE100
891	tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
892	depends on I2C && OF
893	select REGMAP_I2C
894	help
895	  Say y here to support the regulators found on the Freescale
896	  PFUZE100/200/3000/3001 PMIC.
897
898config REGULATOR_PV88060
899	tristate "Powerventure Semiconductor PV88060 regulator"
900	depends on I2C
901	select REGMAP_I2C
902	help
903	  Say y here to support the voltage regulators and convertors
904	  PV88060
905
906config REGULATOR_PV88080
907	tristate "Powerventure Semiconductor PV88080 regulator"
908	depends on I2C
909	select REGMAP_I2C
910	help
911	  Say y here to support the buck convertors on PV88080
912
913config REGULATOR_PV88090
914	tristate "Powerventure Semiconductor PV88090 regulator"
915	depends on I2C
916	select REGMAP_I2C
917	help
918	  Say y here to support the voltage regulators and convertors
919	  on PV88090
920
921config REGULATOR_PWM
922	tristate "PWM voltage regulator"
923	depends on PWM
924	help
925	  This driver supports PWM controlled voltage regulators. PWM
926	  duty cycle can increase or decrease the voltage.
927
928config REGULATOR_QCOM_RPM
929	tristate "Qualcomm RPM regulator driver"
930	depends on MFD_QCOM_RPM
931	help
932	  If you say yes to this option, support will be included for the
933	  regulators exposed by the Resource Power Manager found in Qualcomm
934	  8660, 8960 and 8064 based devices.
935
936	  Say M here if you want to include support for the regulators on the
937	  Qualcomm RPM as a module. The module will be named
938	  "qcom_rpm-regulator".
939
940config REGULATOR_QCOM_RPMH
941	tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
942	depends on QCOM_RPMH || (QCOM_RPMH=n && COMPILE_TEST)
943	depends on QCOM_COMMAND_DB || (QCOM_COMMAND_DB=n && COMPILE_TEST)
944	help
945	  This driver supports control of PMIC regulators via the RPMh hardware
946	  block found on Qualcomm Technologies Inc. SoCs.  RPMh regulator
947	  control allows for voting on regulator state between multiple
948	  processors within the SoC.
949
950config REGULATOR_QCOM_SMD_RPM
951	tristate "Qualcomm SMD based RPM regulator driver"
952	depends on QCOM_SMD_RPM
953	help
954	  If you say yes to this option, support will be included for the
955	  regulators exposed by the Resource Power Manager found in Qualcomm
956	  8974 based devices.
957
958	  Say M here if you want to include support for the regulators on the
959	  Qualcomm RPM as a module. The module will be named
960	  "qcom_smd-regulator".
961
962config REGULATOR_QCOM_SPMI
963	tristate "Qualcomm SPMI regulator driver"
964	depends on SPMI || COMPILE_TEST
965	help
966	  If you say yes to this option, support will be included for the
967	  regulators found in Qualcomm SPMI PMICs.
968
969	  Say M here if you want to include support for the regulators on the
970	  Qualcomm SPMI PMICs as a module. The module will be named
971	  "qcom_spmi-regulator".
972
973config REGULATOR_QCOM_USB_VBUS
974	tristate "Qualcomm USB Vbus regulator driver"
975	depends on SPMI || COMPILE_TEST
976	help
977	  If you say yes to this option, support will be included for the
978	  regulator used to enable the VBUS output.
979
980	  Say M here if you want to include support for enabling the VBUS output
981	  as a module. The module will be named "qcom_usb_vbus_regulator".
982
983config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY
984	tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator"
985	depends on BACKLIGHT_CLASS_DEVICE
986	depends on I2C
987	depends on OF_GPIO
988	select REGMAP_I2C
989	help
990	  This driver supports ATTINY regulator on the Raspberry Pi 7-inch
991	  touchscreen unit. The regulator is used to enable power to the
992	  TC358762, display and to control backlight.
993
994config REGULATOR_RC5T583
995	tristate "RICOH RC5T583 Power regulators"
996	depends on MFD_RC5T583
997	help
998	  Select this option to enable the power regulator of RICOH
999	  PMIC RC5T583.
1000	  This driver supports the control of different power rails of device
1001	  through regulator interface. The device supports multiple DCDC/LDO
1002	  outputs which can be controlled by i2c communication.
1003
1004config REGULATOR_RK808
1005	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators"
1006	depends on MFD_RK808
1007	help
1008	  Select this option to enable the power regulator of ROCKCHIP
1009	  PMIC RK805,RK809&RK817,RK808 and RK818.
1010	  This driver supports the control of different power rails of device
1011	  through regulator interface. The device supports multiple DCDC/LDO
1012	  outputs which can be controlled by i2c communication.
1013
1014config REGULATOR_RN5T618
1015	tristate "Ricoh RN5T567/618 voltage regulators"
1016	depends on MFD_RN5T618
1017	help
1018	  Say y here to support the regulators found on Ricoh RN5T567,
1019	  RN5T618 or RC5T619 PMIC.
1020
1021config REGULATOR_ROHM
1022	tristate
1023
1024config REGULATOR_RT4801
1025	tristate "Richtek RT4801 Regulators"
1026	depends on I2C
1027	select REGMAP_I2C
1028	help
1029	  This adds support for voltage regulators in Richtek RT4801 Display Bias IC.
1030	  The device supports two regulators (DSVP/DSVN).
1031
1032config REGULATOR_RT4831
1033	tristate "Richtek RT4831 DSV Regulators"
1034	depends on MFD_RT4831
1035	help
1036	  This adds support for voltage regulators in Richtek RT4831.
1037	  There are three regulators (VLCM/DSVP/DSVN).
1038	  VLCM is a virtual voltage input for DSVP/DSVN inside IC.
1039	  And DSVP/DSVN is the real Vout range from 4V to 6.5V.
1040	  It's common used to provide the power for the display panel.
1041
1042config REGULATOR_RT5033
1043	tristate "Richtek RT5033 Regulators"
1044	depends on MFD_RT5033
1045	help
1046	  This adds support for voltage and current regulators in Richtek
1047	  RT5033 PMIC. The device supports multiple regulators like
1048	  current source, LDO and Buck.
1049
1050config REGULATOR_RT5190A
1051	tristate "Richtek RT5190A PMIC"
1052	depends on I2C
1053	select REGMAP_I2C
1054	help
1055	  This adds support for voltage regulator in Richtek RT5190A PMIC.
1056	  It integratas 1 channel buck controller, 3 channels high efficiency
1057	  buck converters, 1 LDO, mute AC OFF depop function, with the general
1058	  I2C control interface.
1059
1060config REGULATOR_RT5759
1061	tristate "Richtek RT5759 Regulator"
1062	depends on I2C
1063	select REGMAP_I2C
1064	help
1065	  This adds support for voltage regulator in Richtek RT5759.
1066	  The RT5759 is a high-performance, synchronous step-down DC-DC
1067	  converter that can deliver up to 9A output current from 3V to 6.5V
1068	  input supply.
1069
1070config REGULATOR_RT6160
1071	tristate "Richtek RT6160 BuckBoost voltage regulator"
1072	depends on I2C
1073	select REGMAP_I2C
1074	help
1075	  This adds support for voltage regulator in Richtek RT6160.
1076	  This device automatically change voltage output mode from
1077	  Buck or Boost. The mode transition depend on the input source voltage.
1078	  The wide output range is from 2025mV to 5200mV and can be used on most
1079	  common application scenario.
1080
1081config REGULATOR_RT6245
1082	tristate "Richtek RT6245 voltage regulator"
1083	depends on I2C
1084	select REGMAP_I2C
1085	help
1086	  This adds support for Richtek RT6245 voltage regulator.
1087	  It can support up to 14A output current and adjustable output voltage
1088	  from 0.4375V to 1.3875V, per step 12.5mV.
1089
1090config REGULATOR_RTQ2134
1091	tristate "Richtek RTQ2134 SubPMIC Regulator"
1092	depends on I2C
1093	select REGMAP_I2C
1094	help
1095	  This driver adds support for RTQ2134 SubPMIC regulators.
1096	  The RTQ2134 is a multi-phase, programmable power management IC that
1097	  integrate with four high efficient, synchronous step-down converter
1098	  cores. It features wide output voltage range and the capability to
1099	  configure the corresponding power stages.
1100
1101config REGULATOR_RTMV20
1102	tristate "Richtek RTMV20 Laser Diode Regulator"
1103	depends on I2C
1104	select REGMAP_I2C
1105	help
1106	  This driver adds support for the load switch current regulator on
1107	  the Richtek RTMV20. It can support the load current up to 6A and
1108	  integrate strobe/vsync/fsin signal to synchronize the IR camera.
1109
1110config REGULATOR_RTQ6752
1111	tristate "Richtek RTQ6752 TFT LCD voltage regulator"
1112	depends on I2C
1113	select REGMAP_I2C
1114	help
1115	  This driver adds support for Richtek RTQ6752. RTQ6752 includes two
1116	  synchronous boost converters for PAVDD, and one synchronous NAVDD
1117	  buck-boost. This device is suitable for automotive TFT-LCD panel.
1118
1119config REGULATOR_S2MPA01
1120	tristate "Samsung S2MPA01 voltage regulator"
1121	depends on MFD_SEC_CORE || COMPILE_TEST
1122	help
1123	 This driver controls Samsung S2MPA01 voltage output regulator
1124	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
1125
1126config REGULATOR_S2MPS11
1127	tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
1128	depends on MFD_SEC_CORE || COMPILE_TEST
1129	help
1130	 This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
1131	 output regulator via I2C bus. The chip is comprised of high efficient
1132	 Buck converters including Dual-Phase Buck converter, Buck-Boost
1133	 converter, various LDOs.
1134
1135config REGULATOR_S5M8767
1136	tristate "Samsung S5M8767A voltage regulator"
1137	depends on MFD_SEC_CORE || COMPILE_TEST
1138	help
1139	 This driver supports a Samsung S5M8767A voltage output regulator
1140	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
1141	 supports DVS mode with 8bits of output voltage control.
1142
1143config REGULATOR_SC2731
1144	tristate "Spreadtrum SC2731 power regulator driver"
1145	depends on MFD_SC27XX_PMIC || COMPILE_TEST
1146	help
1147	  This driver provides support for the voltage regulators on the
1148	  SC2731 PMIC.
1149
1150config REGULATOR_SKY81452
1151	tristate "Skyworks Solutions SKY81452 voltage regulator"
1152	depends on MFD_SKY81452
1153	help
1154	  This driver supports Skyworks SKY81452 voltage output regulator
1155	  via I2C bus. SKY81452 has one voltage linear regulator can be
1156	  programmed from 4.5V to 20V.
1157
1158	  This driver can also be built as a module. If so, the module
1159	  will be called sky81452-regulator.
1160
1161config REGULATOR_SLG51000
1162	tristate "Dialog Semiconductor SLG51000 regulators"
1163	depends on I2C
1164	select REGMAP_I2C
1165	help
1166	  Say y here to support for the Dialog Semiconductor SLG51000.
1167	  The SLG51000 is seven compact and customizable low dropout
1168	  regulators.
1169
1170config REGULATOR_SM5703
1171	tristate "Silicon Mitus SM5703 regulators"
1172	depends on MFD_SM5703
1173	help
1174	  This driver provides support for voltage regulators of SM5703
1175	  multi-function device.
1176
1177config REGULATOR_STM32_BOOSTER
1178	tristate "STMicroelectronics STM32 BOOSTER"
1179	depends on ARCH_STM32 || COMPILE_TEST
1180	help
1181	  This driver supports internal booster (3V3) embedded in some
1182	  STMicroelectronics STM32 chips. It can be used to supply ADC analog
1183	  input switches when vdda supply is below 2.7V.
1184
1185	  This driver can also be built as a module. If so, the module
1186	  will be called stm32-booster.
1187
1188config REGULATOR_STM32_VREFBUF
1189	tristate "STMicroelectronics STM32 VREFBUF"
1190	depends on ARCH_STM32 || COMPILE_TEST
1191	help
1192	  This driver supports STMicroelectronics STM32 VREFBUF (voltage
1193	  reference buffer) which can be used as voltage reference for
1194	  internal ADCs, DACs and also for external components through
1195	  dedicated Vref+ pin.
1196
1197	  This driver can also be built as a module. If so, the module
1198	  will be called stm32-vrefbuf.
1199
1200config REGULATOR_STM32_PWR
1201	bool "STMicroelectronics STM32 PWR"
1202	depends on ARCH_STM32 || COMPILE_TEST
1203	help
1204	  This driver supports internal regulators (1V1, 1V8, 3V3) in the
1205	  STMicroelectronics STM32 chips.
1206
1207config REGULATOR_STPMIC1
1208	tristate "STMicroelectronics STPMIC1 PMIC Regulators"
1209	depends on MFD_STPMIC1
1210	help
1211	  This driver supports STMicroelectronics STPMIC1 PMIC voltage
1212	  regulators and switches. The STPMIC1 regulators supply power to
1213	  an application processor as well as to external system
1214	  peripherals such as DDR, Flash memories and system devices.
1215
1216	  To compile this driver as a module, choose M here: the
1217	  module will be called stpmic1_regulator.
1218
1219config REGULATOR_TI_ABB
1220	tristate "TI Adaptive Body Bias on-chip LDO"
1221	depends on ARCH_OMAP || COMPILE_TEST
1222	help
1223	  Select this option to support Texas Instruments' on-chip Adaptive Body
1224	  Bias (ABB) LDO regulators. It is recommended that this option be
1225	  enabled on required TI SoC. Certain Operating Performance Points
1226	  on TI SoCs may be unstable without enabling this as it provides
1227	  device specific optimized bias to allow/optimize functionality.
1228
1229config REGULATOR_STW481X_VMMC
1230	bool "ST Microelectronics STW481X VMMC regulator"
1231	depends on MFD_STW481X || COMPILE_TEST
1232	default y if MFD_STW481X
1233	help
1234	  This driver supports the internal VMMC regulator in the STw481x
1235	  PMIC chips.
1236
1237config REGULATOR_SY7636A
1238	tristate "Silergy SY7636A voltage regulator"
1239	help
1240	  This driver supports Silergy SY3686A voltage regulator.
1241
1242config REGULATOR_SY8106A
1243	tristate "Silergy SY8106A regulator"
1244	depends on I2C && (OF || COMPILE_TEST)
1245	select REGMAP_I2C
1246	help
1247	  This driver supports SY8106A single output regulator.
1248
1249config REGULATOR_SY8824X
1250	tristate "Silergy SY8824C/SY8824E regulator"
1251	depends on I2C && (OF || COMPILE_TEST)
1252	select REGMAP_I2C
1253	help
1254	  This driver supports SY8824C single output regulator.
1255
1256config REGULATOR_SY8827N
1257	tristate "Silergy SY8827N regulator"
1258	depends on I2C && (OF || COMPILE_TEST)
1259	select REGMAP_I2C
1260	help
1261	  This driver supports SY8827N single output regulator.
1262
1263config REGULATOR_TPS51632
1264	tristate "TI TPS51632 Power Regulator"
1265	depends on I2C
1266	select REGMAP_I2C
1267	help
1268	  This driver supports TPS51632 voltage regulator chip.
1269	  The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
1270	  with Serial VID control and DVFS.
1271	  The voltage output can be configure through I2C interface or PWM
1272	  interface.
1273
1274config REGULATOR_TPS6105X
1275	tristate "TI TPS6105X Power regulators"
1276	depends on TPS6105X
1277	default y if TPS6105X
1278	help
1279	  This driver supports TPS61050/TPS61052 voltage regulator chips.
1280	  It is a single boost converter primarily for white LEDs and
1281	  audio amplifiers.
1282
1283config REGULATOR_TPS62360
1284	tristate "TI TPS6236x Power Regulator"
1285	depends on I2C
1286	select REGMAP_I2C
1287	help
1288	  This driver supports TPS6236x voltage regulator chip. This
1289	  regulator is meant for processor core supply. This chip is
1290	  high-frequency synchronous step down dc-dc converter optimized
1291	  for battery-powered portable applications.
1292
1293config REGULATOR_TPS6286X
1294	tristate "TI TPS6286x Power Regulator"
1295	depends on I2C && OF
1296	select REGMAP_I2C
1297	help
1298	  This driver supports TPS6236x voltage regulator chips. These are
1299	  high-frequency synchronous step-down converters with an I2C
1300	  interface.
1301
1302config REGULATOR_TPS65023
1303	tristate "TI TPS65023 Power regulators"
1304	depends on I2C
1305	select REGMAP_I2C
1306	help
1307	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
1308	  three step-down converters and two general-purpose LDO voltage regulators.
1309	  It supports TI's software based Class-2 SmartReflex implementation.
1310
1311config REGULATOR_TPS6507X
1312	tristate "TI TPS6507X Power regulators"
1313	depends on I2C
1314	help
1315	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
1316	  three step-down converters and two general-purpose LDO voltage regulators.
1317	  It supports TI's software based Class-2 SmartReflex implementation.
1318
1319config REGULATOR_TPS65086
1320	tristate "TI TPS65086 Power regulators"
1321	depends on MFD_TPS65086
1322	help
1323	  This driver provides support for the voltage regulators on
1324	  TI TPS65086 PMICs.
1325
1326config REGULATOR_TPS65090
1327	tristate "TI TPS65090 Power regulator"
1328	depends on MFD_TPS65090
1329	help
1330	  This driver provides support for the voltage regulators on the
1331	  TI TPS65090 PMIC.
1332
1333config REGULATOR_TPS65132
1334	tristate "TI TPS65132 Dual Output Power regulators"
1335	depends on I2C && GPIOLIB
1336	select REGMAP_I2C
1337	help
1338	  This driver supports TPS65132 single inductor - dual output
1339	  power supply specifically designed for display panels.
1340
1341config REGULATOR_TPS65217
1342	tristate "TI TPS65217 Power regulators"
1343	depends on MFD_TPS65217
1344	help
1345	  This driver supports TPS65217 voltage regulator chips. TPS65217
1346	  provides three step-down converters and four general-purpose LDO
1347	  voltage regulators. It supports software based voltage control
1348	  for different voltage domains
1349
1350config REGULATOR_TPS65218
1351	tristate "TI TPS65218 Power regulators"
1352	depends on MFD_TPS65218 && OF
1353	help
1354	  This driver supports TPS65218 voltage regulator chips. TPS65218
1355	  provides six step-down converters and one general-purpose LDO
1356	  voltage regulators. It supports software based voltage control
1357	  for different voltage domains
1358
1359config REGULATOR_TPS6524X
1360	tristate "TI TPS6524X Power regulators"
1361	depends on SPI
1362	help
1363	  This driver supports TPS6524X voltage regulator chips. TPS6524X
1364	  provides three step-down converters and two general-purpose LDO
1365	  voltage regulators.  This device is interfaced using a customized
1366	  serial interface currently supported on the sequencer serial
1367	  port controller.
1368
1369config REGULATOR_TPS6586X
1370	tristate "TI TPS6586X Power regulators"
1371	depends on MFD_TPS6586X
1372	help
1373	  This driver supports TPS6586X voltage regulator chips.
1374
1375config REGULATOR_TPS65910
1376	tristate "TI TPS65910/TPS65911 Power Regulators"
1377	depends on MFD_TPS65910
1378	help
1379	  This driver supports TPS65910/TPS65911 voltage regulator chips.
1380
1381config REGULATOR_TPS65912
1382	tristate "TI TPS65912 Power regulator"
1383	depends on MFD_TPS65912
1384	help
1385	    This driver supports TPS65912 voltage regulator chip.
1386
1387config REGULATOR_TPS68470
1388	tristate "TI TPS68470 PMIC Regulators Driver"
1389	depends on INTEL_SKL_INT3472 || COMPILE_TEST
1390	help
1391	  This driver adds support for the TPS68470 PMIC to register
1392	  regulators against the usual framework.
1393
1394	  The module will be called "tps68470-regulator".
1395
1396config REGULATOR_TWL4030
1397	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
1398	depends on TWL4030_CORE
1399	help
1400	  This driver supports the voltage regulators provided by
1401	  this family of companion chips.
1402
1403config REGULATOR_UNIPHIER
1404	tristate "UniPhier regulator driver"
1405	depends on ARCH_UNIPHIER || COMPILE_TEST
1406	depends on OF
1407	select REGMAP_MMIO
1408	default ARCH_UNIPHIER
1409	help
1410	  Support for regulators implemented on Socionext UniPhier SoCs.
1411
1412config REGULATOR_VCTRL
1413	tristate "Voltage controlled regulators"
1414	depends on OF
1415	help
1416	  This driver provides support for voltage regulators whose output
1417	  voltage is controlled by the voltage of another regulator.
1418
1419config REGULATOR_VEXPRESS
1420	tristate "Versatile Express regulators"
1421	depends on VEXPRESS_CONFIG
1422	help
1423	  This driver provides support for voltage regulators available
1424	  on the ARM Ltd's Versatile Express platform.
1425
1426config REGULATOR_VQMMC_IPQ4019
1427	tristate "IPQ4019 VQMMC SD LDO regulator support"
1428	depends on ARCH_QCOM
1429	help
1430	  This driver provides support for the VQMMC LDO I/0
1431	  voltage regulator of the IPQ4019 SD/EMMC controller.
1432
1433config REGULATOR_WM831X
1434	tristate "Wolfson Microelectronics WM831x PMIC regulators"
1435	depends on MFD_WM831X
1436	help
1437	  Support the voltage and current regulators of the WM831x series
1438	  of PMIC devices.
1439
1440config REGULATOR_WM8350
1441	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
1442	depends on MFD_WM8350
1443	help
1444	  This driver provides support for the voltage and current regulators
1445	  of the WM8350 AudioPlus PMIC.
1446
1447config REGULATOR_WM8400
1448	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
1449	depends on MFD_WM8400
1450	help
1451	  This driver provides support for the voltage regulators of the
1452	  WM8400 AudioPlus PMIC.
1453
1454config REGULATOR_WM8994
1455	tristate "Wolfson Microelectronics WM8994 CODEC"
1456	depends on MFD_WM8994
1457	help
1458	  This driver provides support for the voltage regulators on the
1459	  WM8994 CODEC.
1460
1461config REGULATOR_QCOM_LABIBB
1462	tristate "QCOM LAB/IBB regulator support"
1463	depends on SPMI || COMPILE_TEST
1464	help
1465	  This driver supports Qualcomm's LAB/IBB regulators present on the
1466	  Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI
1467	  based PMIC implementations. LAB can be used as positive
1468	  boost regulator and IBB can be used as a negative boost regulator
1469	  for LCD display panel.
1470
1471endif
1472